World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium

WMCAUS 2016

Title of Manuscript (17 pt Times New Roman)

Name Surname a*, Name Surname b, Name Surname c, …

a Author’s full postal address of affiliation including the country name

b Author’s full postal address of affiliation including the country name

c Author’s full postal address of affiliation including the country name

Abstract

The abstract should include the purpose of research, principal results and major conclusions.

References should be avoided, if it is essential, only cite the author(s) and year(s) without giving

reference list. Prepare your abstract in this file and then copy it into the registration web field.

© 2016 The Authors. Published by Elsevier B.V.

Peer-review under responsibility of the organizing committee of WMCAUS 2016.

Keywords: Provide maximum 6 keywords (e.g. keyword 1; keyword 2; keyword 3; keyword 4; keyword 5; keyword 6)

** Corresponding author. Tel.: +………………….E-mail address: …………@....................

2

1. Introduction

State the objectives of the work and provide an adequate background, avoiding a detailed

literature survey or a summary of the results.

2. Primary Headings

Provide sufficient detail to allow the work to be reproduced. Methods already published should

be indicated by a reference: only relevant modifications should be described. This section also

may include theory, background, calculations which represent practical development from a

theoretical basis. Etc.

The following headings may also be used:

2.1. Primary Sub Heading

2.1.1. Secondary sub heading

2.1.1.1. Tertiary sub heading

Manuscripts should be maximum 10 pages (including figures and tables) and typed double-

spaced throughout, at a font size of 12 point (Times New Roman), and with continuous page

numbers.

Figures should be prepared using computer software (Freehand, CorelDraw, etc.) and their

"jpeg" files (minimum 300 dpi in resolution) should be embedded into text in appropriate places.

Preferred font is Times New Roman. Line scale must be submitted in figures if needed.

Follow internationally accepted rules and conventions: use the international system of units (SI).

If other units are mentioned, please give their equivalent in SI.

Present simple formulae in the line of normal text where possible and use the solidus (/) instead

of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be

presented in italics. Powers of “e” are often more conveniently denoted by “exp”. Number

consecutively any equations that have to be displayed separately from the text (if referred to

explicitly in the text).

Please see example equation format:

(1)

Figure and Table captions must be given in the text. A figure caption should comprise a brief

title (not on the figure itself) and a description of the illustration. Keep text in the illustrations

themselves to a minimum but explain all symbols and abbreviations used.

In the text, references must be cited as following.

….. (Surname, 1988)

….. (Surname and Surname, 1988)

….. (Surname et al., 1988)

….. Surname (1988)

….. Surname and Surname (1988)

….. Surname et al. (1988)

4

3. Results and Discussions

This should explore the significance of the results of the work, not repeat them. A combined

Results and Discussion section is often appropriate. Avoid extensive citations and discussion of

published literature.

4. Conclusions

The main conclusions of the study may be presented in a short Conclusions section, which may

stand alone or form a subsection of a Discussion or Results and Discussion section.

Acknowledgement(s)

If needed (List here those individuals who provided help during the research (e.g., providing

language help, writing assistance or proof reading the article, etc.).

References

All references cited in the text, and in captions of figures and tables must be written in this

section to be alphabetical order of surname. Some examples for reference layout are given

below.

Journal references:

Zingoni, A., 1995. Stress analysis of a storage vessel in the form of a complete triaxial ellipsoid:

hydrostatic effects. International Journal of Pressure Vessels and Piping, 62 (3): 269–279

Dhakal, S., Hanaki, K., 2002. Improvements of urban thermal environment by managing heat

discharge sources and surface modification in Tokyo. Energy and Building, 34: 13–23

Proceeding references:

Brown, G., Brindley, G.W., 1980. X-ray difraction procedures for clay mineral identification. In:

Crystal Structures of Clay Minerals and their X-ray Identification, G.W. Brindley and G.Brown

(eds.), Mineralogical Society, London, 305-360.

Book references:

Negnevitsky, M., 2002. Artificial intelligence-a guide to intelligent systems. Addison-Wesley

Co., Great Britain, 394 p.

Published report and technical guide references:

Pack, R.T., Tarboton, D.G., Goodwin, C.N., 1998. Terrain stability mapping with SINMAP,

technical description and users guide for version 1.00. Report Number 4114-0. Terratech

Consulting Ltd., Salmon Arm, BC, Canada (www.tclbc.com)

Personal communications:

Marschalko, M., 2013. Personal communication. VSB-Technical Universitiy of Ostrava, Faculty

of Mining and Geology, Institute of Geological Engineering, Ostrava, Czech Republic.

Web page references:

Weier, J., Herring, D., 2005. Measuring vegetation (NDVI and EVI). Earth Observatory Library

of NASA. http://earthobservatory.nasa.gov/Library/MeasuringVegetation/