Upload
ivan-nikolic
View
21
Download
2
Embed Size (px)
DESCRIPTION
scrb
Citation preview
Artcam 7 Tutorial John Lee@SHU 2007
Step 2 : Creating the recesses
Next, the Create Circle is used to create a circle with an 8mm radius at the centre Double click on the circle to open the Shape Editor and give it a domed raise with an Angle setting of 60
First click on File and New or select Create New Model. This will open the Size for New Model box. Set the size as Height 50 and Width 50. Set the Datum (x= 0, y=0) to be in the middle of the model by clicking in the centre of the box. Set the resolution as 600 x 600 points by using the slider.
Next, the Create Ellipse tool is used to create a small ellipse below the circle as shown below.
Now select the ellipse and use the Envelope Distortion tool again to create a petal shape.
The petal can now be copied several times as follows. Use Select Vector arrow to click on the petal shape to select it – it should turn pink Choose Block Copy / Rotate from the Vector
Editing toolbar.
Artcam 7 Tutorial John Lee@SHU 2007
You are now going to add a 3D effect to the petals. To do this, choose Select Vectors and, holding the Shift key to group them, select each separate petal. The grouped shapes should turn pink Double click on the grouped petals to open the Shape Editor window
In the Shape Editor box, choose the domed surface icon. Enter an Angle of -60 and press Add. This will remove material in the shape of the petals. Click Close and then 3D to see the effect.
Choose Rotate Copy Rotation Centre X: = 0 Rotation Centre Y: = 0 Number of Objects = 6 Click Apply This will copy the petals 6 times around the circle.
Artcam 7 Tutorial John Lee@SHU 2007
Step 3 : Pasting the recesses on the body of the Air Freshener
This should now be saved as a relief (.rlf) file so that it can be pasted in position onto your Fragrant Freebie air freshener To do this go to Save Relief in the Relief toolbar and save your relief
file as petals.rlf.
Open your freshener.art file From the Relief Operations toolbar, choose Load Relief Open your petals.rlf file
Make sure the Pasting option is chosen
Artcam 7 Tutorial John Lee@SHU 2007
The petal design should now appear as a red outline at the bottom LH side of your model. Use the Scale slider and Move to position and resize your petal design. When you are happy with the size and position, click Paste Your Air Freshener should now look
something like the one shown below.