8/2/2019 Arm Ws 20 March
1/2
ARM WORKSHOP ON BLUEBOARD
Enabling ARM Learning in INDIA
www.easyarm.com
Hardware providers at unbelievable price.
www.ngxtechnologies.com
WorkshopThis hands-on training provides the opportunity to make
your hands
dirty on Blueboard by gaining enough programming knowledge on
ARM
controller.
Who should Attend?Any one with good C programming skills and
basic knowledge of micro-
controller / microprocessor.
Lab Environment
The training will be on Blueboard LPC2148 ARM7 board and
practicalswill be from day1 first hour to day4 last hour. Blueboard
is connected to
Host system using USB and Serial Port.
Duration & Fees [ FREE LPC2148- Header board ]Workshop will
be conducted on last weekends of every month 10:00 AM
to 4:00PM. Fees just Rs. 2700.00 For updates check
www.easyarm.com
BlueBoard- LPC2148
FREE
Board
LPC2148- Header Board FREE with Training
8/2/2019 Arm Ws 20 March
2/2
ARM WORKSHOP ON BLUEBOARD
Course Outline:
Day1
Tool Setup: GNU Compiler, Cygwin, Makefile, Startupfile, Linker
ScriptARM Architecture: Introduction, Pipeline, Registers,
Exception modes, Instruction sets
ARM PROG: General Purpose I/Os, LED program, LPC2148 Board
Details
System Peripherals: Bus Structure, Memory Map, MAM, Bootloader,
ISP & IAP. PLL , VLSI Peripheral Bus Driver, Power Control,
Interrupt System
Day2Interrupts: Interrupt Structure ,FIQ Interrupt, Vectored
IRQ, Non-Vectored IRQ, Programs
Serial Communication: UART0 ,UART1, Baud Rate Calculation, Auto
Baud Rate, UART Interrupt
Interfacings: Writing program for LCD and PS/2
KeyboardDay3Timers & PWM: Timer1, Timer0, Match Mode, Capture
Mode, PWM
I2C: I2C BASICS ,Master Mode, Slave Mode, Hardware
Interfacings
SPI: SPI Overview, Master Mode, Slave Mode, Hardware
Interfacings
Day4RTC: RTC Block, Registers, RTC Interrupts, RTC alarm
Mode
ADC& DAC: ADC Overview, Registers, Programming, DAC
Overview, registers & Prog.
Watchdog Timer: Overview, Block Diagram, Registers, Usages &
Programming
Registration:Batch size is limited to 20 members, so candidates
are required to confirm their registration by paying a fee of Rs.
1000.00 as advance.
Payment Mode:
1. Bank Deposit: Bank: State Bank of India, Name: AJAY GOSH
REDDY ARE, A/C No. : 00000020024769162, Branch Code: 10508,
Koramangala, Bangalore2. Demand Draft: DD on Name ofNGX
Technologies Pvt. Ltd. Bangalore can be sent to NGX
Addresshttp://shop.ngxtechnologies.com/contact_us.php3. Once the
payment is done send a mail with the transaction details to
[email protected]
Venue Details:# 38, 1st Floor, 2nd Main, Ashwini Layout,
E.G.Pura, Oppt. Life Style Building, Koramangala, Bangalore-
560047.
Upcoming Workshops: Practicals of USB (2 Days), RTOS on
Blueboard ( 2 Days), Android on ARM9 ( 1 Day)
Note: Candidates has to carry their laptop for practicals, &
for any queries mail us on [email protected] or
[email protected]
We can conduct workshops at your city on demand.
