1. All system parameters can be adjusted by using 4 buttons and an LCD placed on the card; 2. Can be used with any command type up to 16 floors; 3. Can be used at one speed, two speed and speed controlled lifts without any extra parts. System

can be selected from the menu; 4. Can be used in-group operation up to two elevators. All panels in the group are same and no

extra panel is needed; 5. Only two cables are needed for group communication; 6. Floor detection carried out by counter system. Only 3 magnetic switches for one speed and 4 for

two speed systems including limit switches are used for any number of floors; 7. An error code with its explanation displayed on the LCD in case of an abnormal condition (e.g...

H1:Door cannot be locked); 8. At normal condition the lift can be monitored by messages on the LCD (Waits for calls, high

speed, low speed, inspection); 9. An alphanumeric character (L, P, E, F, H, b, o, 0, 1, 2, and 3 can label each floor...); 10. Seven Segment and signalization outputs are short-circuiting protected. In case of a short

circuit, the related output is shut down until problem is removed and a message stating which output is in short-circuit is displayed on LCD (D segment short circuit);

11. Only 15 cables are enough for system to work by using serial car connection (FX_SERI) which reduces labor and cable costs;

12. No extra switch is needed at high speed lifts (1.6 m/sec) for early slow down; 13. Designed according to European Lift Standard EN-81.

REEC Eng. Reda Nashed P. O. Box: 120 Faggala – Cairo 11523

Head Office : 225907639/22592942/01227434398 Cairo Emergency : 0114 4411344 Wadi Degla: 0127 900007

Nasr city Showroom : 01279004900 / 01279005900 North Coast : 0127 9005555 info @ reec-egypt.com