RS-232 IN

DC IN

DC IN

RS-232 USBDOWNSTREAM

VGA OUT PS/2 KB, MOUSE

EQ GAIN 0~7 - or +REMOTE IN

VGA OUT LOCAL OUT POWER INDICATOR

USB UPSTREAM VGA IN

The Arista Xtender™ ARD-1001 is a multi-input/output VGA video extender that extends video, mouse and serial signals up to 1,000 ft (300m) over a single CAT 5e/6 cable. ARD-1001 supports VGA video at resolution up to 1920x1080 at 60Hz. Users can use serial touch, USB or PS/2 keyboard and mouse remotely. The ARD-1001 also incorporates gain and EQ rotary knobs, which let users fine tune the extended VGA signal to achieve the best display quality.

Arista Xtender™ ARD-1001Multi-input/output VGA Digital Extender

• Hospitality

• Resorts

• Entertainment Venues and Events

• Houses of Worship

• Local and remote education

• Hospital

• Control room

• Public information

• Digital Signage.

• Transmission distances of up to 1000 feet (300m).

• Support 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i VGA input.

• Using single CAT5e/6cable to extend digital signal, low-cost.

• 1 VGA loop back at Tx.

• No software is required, easy installation, and supports plug- and-play.

• Perfect image quality, strong anti-interference performance, image clarity and brightness are adjustable.

• Supports RS-232 half-duplex.

• Adjustable equalization on remote display.

• Adjustable gain control on remote display.

• De-skew compensation available for RGB delay control.

• Compact design.

• Wall mounting/DIN-Rail mounting for better stability.

• Supports PC, SUN, MAC or ELINX switch with VGA video.

• Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS.

• Built-in lightning and surge protection.

• Super interference rejection.

Application

Key Features

Local Host

Remote Display

5.65[144]

4.04[103]

1.40[36]

4X Φ35[9]

8X Φ18[5]

2X 2.76[70]

6.19[157]

Specifications

Typical installation diagram

Local Host Line Drawing Remote Display Line Drawing

Arista Xtender™ ARD-1001Multi-input/output VGA Digital Extender

Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) 6.19x4.04x1.45inch/157x103x37mm Power supply 9V to 36V DC Operation consumption 5 Watts [max] Operation temperature 0~50°C (32~122°F) Storage temperature -20~60°C (-4~140°F) Relative humidity 20~90% RH [no condensation]

Package Contents

1 x ARD-1001 Local Host 1 x ARD-1001 Remote Display 2 x 100-220VAC Input/12VDC Output power adapter 1 x 6 feet modeling RS-232 cable (male to male) 1 x 6 feet modeling VGA cable (male to male) 1 x 6 feet modeling RS-232 cable (male to female)

Model Name ARD-1001 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX)

Input 1xVGA,1 x USB, 1xRS-232 1xRJ-45

Output 1xRJ-45, 1xVGA Loop-Back

1xVGA, 1xRS-232, 1xPS/2, 2xUSB

Video bandwidth 350MHz Transimission FHD[1920x1080]-1000ft (300m) [CAT5e/6] Audio support No RS-232 signal type Half-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Equalization Continuous analog control RGB delay control Yes Loop-Back 1 VGA loop-Back at TX

ESD protection

[1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset — ±8kV

PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω]

VGA connector HD-15 [15-pin D-sub female]

RJ-45 connector WE/SS 8P8C with 2 LED indicators RS-232 connector DB-9 [9-pin D-sub female] Keyboard and mouse connector PS/2 Connector USB connector USB 2.0 Type A connector

1.45[37]

5.12[130]6.19[157]

5.65[144]

4.04[103]

1.45[37]

5.12[130]

2.76[70]

1.40[36]

4X R.18[5]

8X R.09[2]

Tx Rx

Arista Xtender™ ARD-1002AMulti-input/output HDMI Digital Extender

RS-232 OUT

DC IN

RS-232 IN USB UPSTREAM HDMI IN

HDMI OUT LOCAL OUT

REMOTE INDC IN

USBDOWNSTREAM

HDMI OUT USB PS/2 OUT

• Hospitality

• Resorts

• Entertainment Venues and Events

• Houses of Worship

• Local and remote education

• Hospital

• Control room

• Public information

• Digital Signage.

• HDMI digital video and audio signal transmission distance up to 246ft (75m) via CAT5e/6.

• Support 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i HDMI input.

• Using single CAT5e/6cable to extend digital signal, low-cost.

• Supporting video, audio, DDC, and HDCP KEY extending together.

• 1 HDMI loop back at Tx.

• Locking HDMI cable for better cable stability.

• No software required, easy installation, support hot-plug.

• Supports RS-232 full-duplex.

• Supports USB or PS/2 keyboard and mouse.

• Compact design.

• Wall mounting/DIN-Rail mounting for better stability.

• Supports a PC, SUN, MAC or some other devices with HDMI video.

• Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS.

• Built-in lightning & surge protection.

• Super interference rejection.

Application

Key Features

The Arista XtenderTM ARD-1002A is a multi-input/output HDMI video /audio extender that extends video, audio, mouse, serial and IR signals up to 246 ft (75m) over a single CAT 5e/6 cable. ARD-1002A supports HDMI video at resolution up to 1920x1080 @60Hz. Users can use serial touch, USB touch*, USB or PS/2 keyboard and mouse remotely.

*USB touch is only supported in Windows HID.

Local Host

Remote Display

Specifications

Typical installation diagram

Local Host Line Drawing Remote Display Line Drawing

Arista Xtender™ ARD-1002AMulti-input/output HDMI Digital Extender

Model Name ARD-1002A Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX)

Input 1xHDMI, 1xUSB 1xRS-232 1xRJ-45, 1xIR

Output 1xRJ-45, 1xIR 1xHDMI Loop Back

1xHDMI, 1xRS-232 1xPS/2 Jack, 2xUSB

Video bandwidth 350MHz Transimission FHD[1920x1080]-246ft (75m) [CAT5e/6] Audio support Yes RS-232 signal type Full-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Loop-out 1 HDMI loop-out at TX

ESD protection

[1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset — ±8kV

PCB stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω]

HDMI connector Locking HDMI female cable RJ-45 connector WE/SS 8P8C with 2 LED indicators RS-232 connector DB-9 [9-pin D-sub female]

Keyboard and mouse connector PS/2 Connector USB connector USB 2.0 Type A connector Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) 6.19x4.04x1.45inch/157x103x37mm Power supply 9V to 36V DC Operation consumption 5 Watts [max] Operation temperature 0~50°C (32~122°F) Storage temperature -20~60°C (-4~140°F) Relative humidity 20~90% RH [no condensation]

Package Contents

1 x ARD-1002A Local Host 1 x ARD-1002A Remote Display 2 x 100-220VAC Input/ 12VDC output power adapter 1 x 6 feet modeling RS-232 cable (male to male) 1 x 6 feet modeling RS-232 cable (male to female) 1 x 6 feet modeling HDMI cables (male to female) 1 x 6 feet USB Type A to Type A cable

5.12[130]6.19[157]5.65[144]

1.40[36]

8X R.18[5]

8X R.18[5]

8X R.09[2]8X R.09

[2]

2.76[70]

4.04[103]

1.45[37]

1.45[37]

5.12[130]

6.19[157]

5.65[144]

1.40[36]

2.76[70]

4.04[103]

The Arista Xtender™ ARD-1002B is a multi-input/output HDMI video /audio extender that extends video, audio, mouse, and serial signals up to 10,000 ft (3km) over a single fiber cable. ARD-1002B supports HDMI video at resolution up to 1920x1080 at 60Hz. Users can use serial touch, USB or PS/2 keyboard and mouse remotely.

RS-232 IN

DC IN

RS-232

DC IN FIBER IN

HDMI OUT PS/2USBDOWNSTREAM

LINK LED

HDMILOCAL Out

FIBER OUT LINK LED

USB UPSTREAM HDMI IN

Arista Xtender™ ARD-1002BMulti-input/output HDMI Digital Extender over fiber

• Rental & Staging

• Auditoriums

• Stadiums and Theaters

• Public transportation hubs

• Distance learning

• Surgical or medical imaging and more

• HDMI signal transmission distances of up to 10,000ft (3km).

• Supports 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i HDMI signal input.

• Locking HDMI cable for better cable stability.

• Using single optical fiber cable to extend digital signal, low- cost, faster transmission rate and smaller attenuation.

• Supports video, audio, DDC, and HDCP KEY extending together.

• 1 HDMI loop back at Tx.

• Locking HDMI cable for better cable stability.

• Supports the touch screen and keyboard/mouse signal transmission.

• No software is required, easy installation, supports hot-plug and RS-232 full-duplex.

• Compact design.

• Wall mounting/DIN-Rail mounting for better stability.

• Supports a PC, SUN, MAC or other devices with HDMI video.

• Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS.

• Built-in lightning & surge protection, super interference rejection.

Application

Key FeaturesLocal Host

Remote Display

Model Name ARD-1002B Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX)

Input 1x HDMI, 1xUSB, 1x RS-232 1xOptical port

Output 1x Optical port, 1x HDMI Loop-Back

1x HDMI, 1xRS-232, 1x PS/2, 2xUSB

Video bandwidth 350MHz

Transimission FHD 1920x1080-10,000ft (3km) [Optical fiber cable]

Audio support Yes RS-232 signal type Full-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Loop-out 1 HDMI loop-out at TX

ESD protection

[1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] [2] Core chipset — ±8kV

PCB stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω]

HDMI connector Locking HDMI female cable

Optical connector SFP standard, Dual-mode, 10G

RS-232 connector DB-9 [9-pin D-sub female] Keyboard and mouse connector PS/2 connector USB connector USB 2.0 Type A connector Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) 6.19x4.04x1.45inch/157x103x37mm Power supply 9V to 36V DC Operation consumption 5 Watts [max] Operation temperature 0~50°C (32~122°F) Storage temperature -20~60°C (-4~140°F) Relative humidity 20~90% RH [no condensation]

Package Contents

1 x ARD-1002B Local Host; 1 x ARD-1002B Remote Display, 2 x 100~220VAC input / 12VDC output power adapter 1 x 6 feet modeling RS-232 cable (male to male) 1 x 6 feet modeling RS-232 cable (male to female) 1 x 6 feet modeling HDMI cables (male to female) 1 x 6 feet USB Type A to Type A cable

Specifications

Typical installation diagram

Local Host Line Drawing Remote Display Line Drawing

Arista Xtender™ ARD-1002BMulti-input/output HDMI Digital Extender over fiber

1.45[37]

2.76[70]

4.04[103]

5.12[130]6.19[157]

1.40[36]

5.65[144]

4X Φ35[9]

4X Φ35[9]

8X Φ18[4,5]8X Φ18

[4,5]

5.12[130]

6.19[157]

5.65[144]

1.45[37]

4.04[103]

2.76[70]

1.40[36]

Tx Rx

USB DOWNSTREAM

USB UPSTREAM

DC IN LOCAL OUT

DC IN REMOTE IN

Arista Xtender™ ARD-1003USB Digital Extender

• Remote Desktop (keyboard/mouse) Extension

• Security

• Industrial control

• Digital Signage control

• Control room

• Professional Audio-visual

• Surgical or medical imaging and more

• USB 2.0 signal transmission distance up to 330ft (100m).

• 1 USB input and 4 USB inputs all in USB 2.0 Type A connecter.

• Using single CAT5/CAT5E/CAT6 cable to extend digital signal, low-cost.

• Supporting High-Speed, Full-Speed or Low-Speed USB2.0 device.

• No software required, easy installation, support hot-plug.

• Compact design.

• Wall mounting/DIN-Rail mounting for better stability.

• Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS.

• Built-in lightning & surge protection.

• Super interference rejection.

Application

Key Features

The Arista Xtender™ ARD-1003 is a USB extender that extends all types of USB 2.0 devices such as flash drives, keyboards, mice, webcams and interactive whiteboards up to 330 ft (100m) over a single CAT 5e/6 cable. No software needed, true plug-and-play.

Local Host

Remote Display

Specifications

Typical installation diagram

Local Host Line Drawing Remote Display Line Drawing

Arista Xtender™ ARD-1003USB Digital Extender

Model Name ARD-1003 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX) Input 1xUSB upstream 1xRJ-45 Output 1xRJ-45 4xUSB downstream

USB device USB 1.0, USB 1.1, USB 2.0; Low-Speed, Full-Speed or High-Speed

Transimission CAT5e/6 up to 330ft (100m)

ESD protection

[1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]; [2] Core chipset — ±8kV

PCB stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω]

RJ-45 connector WE/SS 8P8C with 2 LED indicators

Keyboard and mouse connector USB interface USB connector USB 2.0 Type A connector Mechanical Mounting Wall mount or DIN-RAIL mount Dimension (LxWxH) 6.19x4.04x1.45inch/157x103x37mm Power supply 9V to 36V DC Power consumption 5 Watts [max] Operation temperature 0~50°C (32~122°F) Storage temperature -20~60°C (-4~140°F) Relative humidity 20~90% RH [no condensation]

Package Contents

1 x ARD-1003 Local Host; 1 x ARD-1003 Remote Display, 2 x 100~220VAC input / 12VDC output power adapter

1.45[37]

5.12[130]

6.19[157.2]5.65

[143.6]

1.40[36]

2.76[70]

4.04[103]

4X Φ35[9]

4X R.18[4,5]

4X R.09[2,3]8X Φ18

[4,5]

1.45[37]

5.12[130]6.19[157]5.65[144]

1.40[36]

2.76[70]

4.04[103]

• Hospitality

• Resorts

• Entertainment Venues and Events

• Houses of Worship

• Local and remote education

• Hospital

• Control room

• Public information

• Digital Signage.

The Arista XtenderTM ARD-1005 is a DVI/HDMI video/audio extender that extends video and audio signals up to 246 ft (75m) over a single CAT 5e/6 cable and is PoE powered. ARD-1005 supports DVI video signal, and HDMI video signal* at resolution up to 1920x1080 at 60Hz.

* through adapter. No audio signal.

REMOTE IN

OUTPUT

DVI OUT

LOCAL DVI IN

Arista Xtender™ ARD-1005DVI Digital Extender with PoE

• DVI signal transmission distances of up to 246ft (75m).

• Power over Ethernet.

• Supports 24/50/60fps/1080p/1080i/720p/576p/576i/480p/480i signal input.

• Just using a CAT5E/CAT6 LAN cable to extend digital signal, low-cost, faster transmission rate and smaller attenuation.

• Compact design.

• No software is required, easy to use, supports hot-plug.

• Simply insert into device for better stability

• Supports a PC, SUN, MAC or other devices with DVI signal video.

• Multi-platform support: Windows, Solaris, Linux, FreeBSD, and MAC OS.

• Built-in lightning & surge protection, super interference rejection.

Application

Key Features

PCB stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω]

Model Name ARD-1005 Technical Local Host Remote Display Role of usage Transmitter (TX) Receiver (RX)

Input 1xLocal DVI IN 1xDC 48V Input 1xRemote RJ-45 IN

Output 1xLocal RJ-45 1xRemote DVI OUT Video bandwidth 350MHz Transimission FHD 1920x1080-246ft (75m) [CAT5e/6] Audio support No Input video signal 1.2 Volts [peak-to-peak]

ESD protection

[1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]; [2] Core chipset — ±8kV

Mechanical

Dimension (LxWxH) 3.80 x 3.99 x 1.02 inch / 96.5 x 101.3 x 26.0 mm

Power supply DC IN 48V Power consumption 5 Watts [max] Operation temperature 0~50°C (32~122°F) Storage temperature -20~60°C (-4~140°F) Relative humidity 20~90% RH [no condensation]

Package Contents 1 x ARD-1005 Local Host; 1 x ARD-1005 Remote Display, 1 x 48VDC output power adapter

Specifications

Typical installation diagram

Local Host Line Drawing Remote Display Line Drawing

Arista Xtender™ ARD-1005DVI Digital Extender with PoE

Tx Rx

1.02[26]

1.81[46].78

[19,8]

3.99[101,3]

3.33[84,5]

3.80[96,5]

2.20[55,9]

2.46[62,5]

1.02[26]

.78[19,8]

3.99[101,3]

1.81[46]

2.46[62,5]

1,01[25,6]

2,20[55,9]

3,33[84,5]

3,80[96,5]