Upload
phungnguyet
View
213
Download
0
Embed Size (px)
Citation preview
92014 No. 398
●Issue : September 2014, No.398 ●Editor in Chief : Hideyuki hosoya
Kansai Branch TEL : +81(0)6 6364 0373 Chubu Branch TEL : +81(0)52 212 1880Sales Support & Branch Office Management Department TEL : +81(3)5606 1095 Tohoku Territory TEL : +81(0)22 266 3344 Kyushu Territory TEL : +81(0)92 291 6126
1-5-1, Kiba, Koto-ku, Tokyo 135-8512
http://www.fujikura.co.jp
Fujikura Ltd.
On the basis of policy of universal design (UD), easy to understand and easy to read character design are used.
“Tsunagu”Technology New Product News
Power & Telecommunication System Strategy & Sales Engineering Division [email protected]
Power & Telecommunication System Strategy & Sales Engineering Division [email protected]
Fujikura has started delivering harnesses for large-sized cruise ships being built by Mitsubishi Heavy Industries, Ltd. The
cruise ships under construction for Carnival Corporation & plc's AIDA Cruises brand is the largest built in Japan with a
gross tonnage of 125,000 and 3,250 passenger capacity. The harness combines two companies' knowhow and
techniques. Fujikura applied its knowhow to produce electric cables for ships. Nishi Nippon Electric Wire and Cable, a
Fujikura Group member, also used its techniques for designing wiring for home and forming harnesses, which the
company excels in. The product is designed to ensure safety using a halogen-free material with high flame-retardant
characteristics. Assembling cables into a harness already achieved labor savings at the construction site, and besides,
producing a flat harness allowed substantial space savings in the ship, where wiring space is limited. In addition, our
production system was highly regarded for reading wiring length and cable type data that vary among rooms off a
drawing and forming a harness.
Major Features
■ Significant labor and space savings by designing flat-type harness
■ Safety-minded design with high flame-retardancy and eco-friendliness
■ Production system for assembling cables to form harnesses by reading wiring length and cable type from drawings
Fujikura has developed a multi-fiber optical connector for ultrahigh definition imaging devices including 4k/8k super-high
vision broadcasting devices used at studios and started delivering the product. Association of Radio Industries and
Businesses (ARIB) has established the standards of Interface for UHDTV Production Systems B-58 ver. 1.0, which
standardized our optical connector. Being attachable to both ends of a 24-fiber optical cable, the connector contributes
to the realization of high-density optical interconnection and reductions in time needed for connecting and disconnecting.
Major Features
■ Capable of more than 5000 times of connecting/disconnecting cycles
■ 24-fiber connector of size equivalent to conventional BNC connector
■ Bayonet connection by only rotating the coupling
■ Use of O ring for com water and dust
Specifications
Optical Fiber
Number of Fibers
Splicing Loss
Number of connecting/disconnecting cycles
Strength of mating junction
Water proof / Dust proof
Items Performance
Muti-mode Optical Fiber
24 fibers
0.75 dB or lower (wavelength 850 nm)
5000 times or more
250 N
IP 67
Appearance of Cruise Ship for Carnival's AIDA Cruises Brand Flat-type Harness for Cruise Ship
Plug Receptacle
Connection between Connector and Device
Plug
Receptacle
24-fiber Optical Fiber Cable
Launch of Delivering Flat-type Harness for Passenger Ship
Powerand
Telecom
ARIB Standard Multi-fiber Optical Connector for Ultrahigh-definition Imaging Devices
Powerand
Telecom
Distinctive flat shape
Easy to bend comparing with round-shape cableInstallable in gap between rooms
’14SE
P
Power & Telecommunication System Strategy & Sales Engineer Division [email protected]
Outline of Optical Cable System with MPO Connector and Its BenefitThis optical cable system enables high-density mounting by the use of 12-fiber MPO connectors and labor saving at
working sites and higher performance by systematization and the use of connectors. The system is the most suitable for
data center use. The system also offers high expandability because of its easy upgradability to 40 GbE or 100 GbE by
just changing modules and patch codes once 10 GbE has been constructed.
Low-friction flame-retardant sheath
Tensile strength
Notch
Optical fiber codes (two)(BIF + low-friction)
Corporate R&D Planning Center [email protected]
Electronic Components (Fujikura Booth 5K82), Key Technology Stage, Hall 5, Makuhari Messe
October 7 (Tue.) to 11(Sat) 2014 10:00 - 17:00
Fujikura will be exhibiting at CEATEC JAPAN 2014 to be held in
October.
This exhibi t ion is one of Asia's largest comprehensive
exhibitions related to the IT and electronics industries. This
year's exhibition has the theme of “NEXT - Technology Makes
the Future”. Key Technology Stage, where our products will be
on display, will bring together world's cutting-edge electronic
components and device-related technologies.
Fujikura's exhibits will include yttrium-based high-temperature superconducting wire rods, cables for photovoltaic
power generation, flexible printed circuit boards, electronic wires, and fiber lasers. These products represent our
"Tsunagu" (connection) technologies and will let you know about their contribution in wide areas of our life
ranging from social infrastructures to mobile devices.
We are very looking forward to meeting you at our booth.
Items
Number of fibers
Fiber
Sheath color
Outer diameter and weight
Connector
Crush
Low-friction characteristic
6.0 mm · 34 g/m
SC, LC
1000 kg*2
60% reduction in dynamical friction coefficient*3
SM (BIF:R7.5)*1
Purple
Specifications (standard)
Two-fiber
OM2 (BIF)
Yellow
OM3 (BIF)
Light green
*1 BIF (Bending-loss Insensitive Fiber) *2 Fujikura's test results (10 cm flat board)*3 Fujikura's test results (comparison with our conventional product)
Specifications
CTC Data Center Nogoya Marunouchi
Replacement of this part only
Switch(40 G)
19-inch rack
Trunk cable
MPO patch code
MPO patch code
Patch panel
Patch panel
MPO panel
MPO panel
Server(40 G)
19-inch
Trunk cable
Patch panel
Patch panel
Switch
19-inch rack
Trunk cable
Optical patch code
Optical patch code
Patch panel
Patch panel
MPO/LC connector module
MPO/LC connector module
Server
19-inch
Trunk cable
Patch panel
Patch panel
The high-speed, large-capacity cable system with 12-fiber MPO connectors is enclosed in racks in the room separated by isles with the air condition kept efficiently by separating cool air from exhausted heat.
Development of new type Magetsuyo®Chubu Telecommunications Decides to Use Fujikura Optical Cable System in Data Center
Powerand
Telecom
Upgrading from 10 to 40 GbE to 40 GbE
Powerand
Telecom
Exhibition
CEATEC JAPAN 2014
Date Venue
Chubu Telecommunications Co., Inc. (CTC) has just decided to use a Fujikura optical cable system with multi-fiber MPO
connectors for its LAN network in its Nagoya Marunouchi Data Center. Marunouchi Data Center is the newest urban
data center located in the center of Nagoya City.
This optical cable system conforms to ANSI/TIA-568-C3 standards focusing on realization of dense, space-saving,
expandable wiring to provide high-quality, high-reliability cloud services. The optical system is thus most suitable for data
center use. The product based on our highly precise connection techniques and quality control system will further
contribute to the advancement of high-quality, high reliable cloud services.
Optical communications take on more importance as the volume of data traffic has been increasing due to the
proliferation of FTTH, smartphones and cloud services. Fujikura has developed new type Magetsuyo, a high-abration
resistance and low-friction cable most suitable for installation in communications facilities. This product uses
bending-loss insensitive fiber and high-abration resistance sheath and has excellent easily cable- handling. Furthermore,
this product uses a new type of low-friction cable sheath and thus demonstrates its outstanding performance in
removing cables or installing additional cables.
Power & Telecommunication System Strategy & Sales Engineer Division [email protected]
Outline of Optical Cable System with MPO Connector and Its BenefitThis optical cable system enables high-density mounting by the use of 12-fiber MPO connectors and labor saving at
working sites and higher performance by systematization and the use of connectors. The system is the most suitable for
data center use. The system also offers high expandability because of its easy upgradability to 40 GbE or 100 GbE by
just changing modules and patch codes once 10 GbE has been constructed.
Low-friction flame-retardant sheath
Tensile strength
Notch
Optical fiber codes (two)(BIF + low-friction)
Corporate R&D Planning Center [email protected]
Electronic Components (Fujikura Booth 5K82), Key Technology Stage, Hall 5, Makuhari Messe
October 7 (Tue.) to 11(Sat) 2014 10:00 - 17:00
Fujikura will be exhibiting at CEATEC JAPAN 2014 to be held in
October.
This exhibi t ion is one of Asia's largest comprehensive
exhibitions related to the IT and electronics industries. This
year's exhibition has the theme of “NEXT - Technology Makes
the Future”. Key Technology Stage, where our products will be
on display, will bring together world's cutting-edge electronic
components and device-related technologies.
Fujikura's exhibits will include yttrium-based high-temperature superconducting wire rods, cables for photovoltaic
power generation, flexible printed circuit boards, electronic wires, and fiber lasers. These products represent our
"Tsunagu" (connection) technologies and will let you know about their contribution in wide areas of our life
ranging from social infrastructures to mobile devices.
We are very looking forward to meeting you at our booth.
Items
Number of fibers
Fiber
Sheath color
Outer diameter and weight
Connector
Crush
Low-friction characteristic
6.0 mm · 34 g/m
SC, LC
1000 kg*2
60% reduction in dynamical friction coefficient*3
SM (BIF:R7.5)*1
Purple
Specifications (standard)
Two-fiber
OM2 (BIF)
Yellow
OM3 (BIF)
Light green
*1 BIF (Bending-loss Insensitive Fiber) *2 Fujikura's test results (10 cm flat board)*3 Fujikura's test results (comparison with our conventional product)
Specifications
CTC Data Center Nogoya Marunouchi
Replacement of this part only
Switch(40 G)
19-inch rack
Trunk cable
MPO patch code
MPO patch code
Patch panel
Patch panel
MPO panel
MPO panel
Server(40 G)
19-inch
Trunk cable
Patch panel
Patch panel
Switch
19-inch rack
Trunk cable
Optical patch code
Optical patch code
Patch panel
Patch panel
MPO/LC connector module
MPO/LC connector module
Server
19-inch
Trunk cable
Patch panel
Patch panel
The high-speed, large-capacity cable system with 12-fiber MPO connectors is enclosed in racks in the room separated by isles with the air condition kept efficiently by separating cool air from exhausted heat.
Development of new type Magetsuyo®Chubu Telecommunications Decides to Use Fujikura Optical Cable System in Data Center
Powerand
Telecom
Upgrading from 10 to 40 GbE to 40 GbE
Powerand
Telecom
Exhibition
CEATEC JAPAN 2014
Date Venue
Chubu Telecommunications Co., Inc. (CTC) has just decided to use a Fujikura optical cable system with multi-fiber MPO
connectors for its LAN network in its Nagoya Marunouchi Data Center. Marunouchi Data Center is the newest urban
data center located in the center of Nagoya City.
This optical cable system conforms to ANSI/TIA-568-C3 standards focusing on realization of dense, space-saving,
expandable wiring to provide high-quality, high-reliability cloud services. The optical system is thus most suitable for data
center use. The product based on our highly precise connection techniques and quality control system will further
contribute to the advancement of high-quality, high reliable cloud services.
Optical communications take on more importance as the volume of data traffic has been increasing due to the
proliferation of FTTH, smartphones and cloud services. Fujikura has developed new type Magetsuyo, a high-abration
resistance and low-friction cable most suitable for installation in communications facilities. This product uses
bending-loss insensitive fiber and high-abration resistance sheath and has excellent easily cable- handling. Furthermore,
this product uses a new type of low-friction cable sheath and thus demonstrates its outstanding performance in
removing cables or installing additional cables.
92014 No. 398
●Issue : September 2014, No.398 ●Editor in Chief : Hideyuki hosoya
Kansai Branch TEL : +81(0)6 6364 0373 Chubu Branch TEL : +81(0)52 212 1880Sales Support & Branch Office Management Department TEL : +81(3)5606 1095 Tohoku Territory TEL : +81(0)22 266 3344 Kyushu Territory TEL : +81(0)92 291 6126
1-5-1, Kiba, Koto-ku, Tokyo 135-8512
http://www.fujikura.co.jp
Fujikura Ltd.
On the basis of policy of universal design (UD), easy to understand and easy to read character design are used.
“Tsunagu”Technology New Product News
Power & Telecommunication System Strategy & Sales Engineering Division [email protected]
Power & Telecommunication System Strategy & Sales Engineering Division [email protected]
Fujikura has started delivering harnesses for large-sized cruise ships being built by Mitsubishi Heavy Industries, Ltd. The
cruise ships under construction for Carnival Corporation & plc's AIDA Cruises brand is the largest built in Japan with a
gross tonnage of 125,000 and 3,250 passenger capacity. The harness combines two companies' knowhow and
techniques. Fujikura applied its knowhow to produce electric cables for ships. Nishi Nippon Electric Wire and Cable, a
Fujikura Group member, also used its techniques for designing wiring for home and forming harnesses, which the
company excels in. The product is designed to ensure safety using a halogen-free material with high flame-retardant
characteristics. Assembling cables into a harness already achieved labor savings at the construction site, and besides,
producing a flat harness allowed substantial space savings in the ship, where wiring space is limited. In addition, our
production system was highly regarded for reading wiring length and cable type data that vary among rooms off a
drawing and forming a harness.
Major Features
■ Significant labor and space savings by designing flat-type harness
■ Safety-minded design with high flame-retardancy and eco-friendliness
■ Production system for assembling cables to form harnesses by reading wiring length and cable type from drawings
Fujikura has developed a multi-fiber optical connector for ultrahigh definition imaging devices including 4k/8k super-high
vision broadcasting devices used at studios and started delivering the product. Association of Radio Industries and
Businesses (ARIB) has established the standards of Interface for UHDTV Production Systems B-58 ver. 1.0, which
standardized our optical connector. Being attachable to both ends of a 24-fiber optical cable, the connector contributes
to the realization of high-density optical interconnection and reductions in time needed for connecting and disconnecting.
Major Features
■ Capable of more than 5000 times of connecting/disconnecting cycles
■ 24-fiber connector of size equivalent to conventional BNC connector
■ Bayonet connection by only rotating the coupling
■ Use of O ring for com water and dust
Specifications
Optical Fiber
Number of Fibers
Splicing Loss
Number of connecting/disconnecting cycles
Strength of mating junction
Water proof / Dust proof
Items Performance
Muti-mode Optical Fiber
24 fibers
0.75 dB or lower (wavelength 850 nm)
5000 times or more
250 N
IP 67
Appearance of Cruise Ship for Carnival's AIDA Cruises Brand Flat-type Harness for Cruise Ship
Plug Receptacle
Connection between Connector and Device
Plug
Receptacle
24-fiber Optical Fiber Cable
Launch of Delivering Flat-type Harness for Passenger Ship
Powerand
Telecom
ARIB Standard Multi-fiber Optical Connector for Ultrahigh-definition Imaging Devices
Powerand
Telecom
Distinctive flat shape
Easy to bend comparing with round-shape cableInstallable in gap between rooms
’14SE
P