AREA 2 - Douglas Shire Council · [email protected] HORTULUS LANDSCAPE DESIGN & MANAGEMENT HORTULUS AUSTRALIA PTY LTD ABN NO 84 105 194 821 Client: DOUGLAS SHIRE COUNCIL Project:

GSPublisherEngine 0.0.100.100

Dwg no:Drawn by: DV

Issue:

Job No: DSC-D19LOCATION PLAN & SPEC.Date:Scale:

1:100, 1:20 26-03-20 LP_01 ISSUE - E

Page: 1 of 1

Consultant: John Sullivan B.App.Sc.Hort, M.A.I.HPO BOX 798 PORT DOUGLAS QLD 4877

ph: 4099 1861 mob: 0412 944 [email protected]

HORTULUSLANDSCAPE DESIGN & MANAGEMENT

HORTULUS AUSTRALIA PTY LTDABN NO 84 105 194 821

Client: DOUGLAS SHIRE COUNCIL

Project: PROPOSED LANDSCAPE PLANTING Macrossan Street, Port Douglas QLD 4877

LANDSCAPE SPECIFICATION

CARSTENS MONUMENT This is a historic monument built in white marble and is always to be protected during the project. On advice from the Queensland Government’s, Department of Environment & Science, Principle Heritage Officer, Arts & Heritage it is noted; advice from a heritage

stonemason would be required as to the condition of the memorial to ensure any conservation works are coordinated as part of the landscaping.

The existing concrete slab surrounding the memorial base IS TO REMAIN to ensure stability, with no pressure applied to that slab while

landscape materials are removed.

Any demolition or landscaping works around the memorial will not worsen the condition of the monument and ensure drainage to fall away from the monument. An exemption certificate from the Queensland Government is to be secured prior to any works commencing.

EXISTING TREES

Trees are to be assessed by Qualified Horticulturalist and a Qualified Arborist on commencement of works, with any remedial work to be

carried out in conjunction with landscaping works. Root damage is to be minimal and where necessary any existing rocks/structure that

needs to be kept in place to ensure the stability of the tree should remain, and any root damage reported.

FOOTPATH PAVING

AREAS 1 &4 main pavement areas will be determined by the treatment of a new pedestrian crossing (determined by others). The current

design suggests the use of exposed aggregate concrete using three complimentary coloured exposed pebbles (5mm-10mm); Pink granite; Blue Riverstone (gray) and Walsh Gold (cream coloured). All works to be to Council Standards in accordance with FNQROC, and

Australian Standards. AREAS 2 &3 have small areas of hard stand pavement to accommodate smoking away from footpaths. Recycle existing clay pavers from

pedestrian crossings to match existing footpaths in Macrossan street, with laying pattern to be approved by Council in accordance with FNQROC, and Australian Standards.

AREA 4 requires resin pebble to be used as a surface to the north of the pedestrian crossing, to allow tree root growth under the permeable

surface, and avoid any lifting of slabs or pavers.

IRRIGATION

All planting areas to be irrigated with an automated system. All street plantings will use pop-up sprays (to avoid vandalism) and be connected according to Council requirements. Irrigation to be installed in accordance with Council regulations and Australian Standards.

NATURAL GROUND SOIL

To be cultivated to a depth of 200mm where possible and amended with 50% aged compost, with 500g/m2 of gypsum and suitable organic fertiliser at the recommended rate.

PLANTER GARDEN EDGES

Raised garden edges are to be Straightcurve Garden Edging product in a weathering steel finish. AREAS 1,2, &3 to use the 520mm high product with tensioning cables installed to manufacturers detail. Finished height of garden edge is be 450mm above existing kerb. AREA 4

to use 400mm high product with finished height to be 300mm above existing kerb.

RAISED GARDEN BED SOIL

is to be a suitable garden bed mix of 33% approved natural soil 33% aged organic matter and 33% Mill Mud mixed well & pH adjusted.

Finished soil level to be 100mm below top of garden edge and allow for 20% compaction in boxes over the first 12 months by loading the soil height above required. Soil heights in lower garden areas to be 50mm below top of kerb. All new soil to be kept at least 300mm away

from existing tree trunks and not to cover tree roots by more than 100mm.

MULCH

Use aged organic mulch to a depth of 75mm deep ensuring all plant stems are free of debris.

BOLLARDS

Are to be recycled timber from the Port Douglas Sugar Wharf deck. Four boards (200mm x 50mm each) are to be bolted together in two places to form a timber bollard 200mm x 200mm and caped with a 200mm x200mm x 100mm weathered steel cap. Refer detail

BENCH SEATS

To be Stoddart Town& Park, Metro Bench Curved custom made. AREA 1 to be 3000mm in length and AREA 3 to have two seats to be

3600mm in length. Location as shown on Plan.

BIKE RACK

To match existing products used in Warner Street.

ASH TRAYS

To match existing bin system already in place in Macrossan Street to Council Standard.

AREA 1

AREA 4

AREA 2AREA 3

WA

RNER

ST

MA

CRO

SSA

N S

T

COLES


Dwg no:Drawn by: DV

Issue:

Job No: DSC-D19AREA 1 CONCEPTDate:Scale:

1:100, 1:20 26-03-20 LP_01 ISSUE - E

Page: 1 of 1







Planting Area 1

CODE BOTANICAL NAME COMMON NAME NO. POT SIZE TYPE H&W.

COR.PS Cordyline fruiticosa “Pink Sister” Cordyline Pink Sister 7 200mm S 3x1.5

FIC.G Ficus macrocarpa “Green Island” Green Island Fig 27 140mm S 1x1

PAN.P Pandanus pygmaeus Variegated Dwarf Pandan 39 140mm GC 0.3x1

PEL.P Peltophorum pterocarpum Yellow Flame Tree 1 Existing T 12x8

PHI.G Philodendron X gloriosum Velvet Elephant Ear 16 200mm S 1x1

NOTE: Suitable substitutions may be made depending on the availability of the species and pot size.

KEY: C = Climber F = Fern GC = Ground Cover

G = Ginger P = Palm S = Shrub

Se= Sedge T = Tree

Planting Area 2


COR.SC Cordyline fruiticosa “Susies Choice” Cordyline Susies Choice 5 200mm S 1x0.5



PHI.BM Philodendron cv. Burle Marx Philodendron Burl marx 24 200mm GC 1x2


KEY: C = Climber F = Fern GC = Ground Cover G = Ginger P = Palm S = Shrub Se= Sedge T = Tree

Planting Area 3









Se= Sedge T = Tree

Planting Area 4


APL.D Alpinia purpurata cv dwarf Dwarf Red Shell Ginger 10 200mm S 1x1


FIC.B Ficus benjamina Fig Tree 1 Existing S 1x1



TAB.R Tabebuia rosea Pink Trumpet Tree 1 100Ltr T 8x6


KEY: C = Climber F = Fern GC = Ground Cover G = Ginger P = Palm S = Shrub

Se= Sedge T = Tree

CUSTOM MADE TIMBERBOLLARD: REFER DETAIL

EXPOSED AGGREGATECONCRETE

CUSTOM MADE TIMBERBENCH SEAT

PROPOSED ASH TRAY

EXISTING EDGE OF ROCKRETAINING TO BE

REMOVED

STRAIGHT CURVE'WEATHERING STEEL'

RETAINING TO 450mm HIGH(SHAPE OF BOAT)

PAN.P - 15

PEL.P - EXISTING TREE

PHI.G - 16

FIC.G - 27

PAN.P - 24

EXISTING PLANTINGTO BE DONE AS A SEPARATE STAGE:PROPOSED PEDESTRIAN CROSSING

SLIGHTLY RAISED AS SPEED HUMPWITH 'WAVES' OF EXPOSED

AGGREGATE DEORATIVECONCRETE

COR.PS - 7

EXISTING ELECTRICAL BOX

EXISTING 700mm WIDE KERB

TYPICAL BOLLARD DETAIL (1:20)-

LANDSCAPE CONCEPT A : AREA 11:100-

02

TIMBER 200mm x 50mm No.4.WEATHERED STEEL CAP

RECYCLED HARDWOOD

WEATHERED STEEL NUT & BOLTTO PROTRUDE 10mm FROMPOST

SET DOWN 500mm AND SECUREIN CEMENT OR SIMILAR OR SETFLUSH WITH CUSTOM MADEBRACKET BOLTED TO PAVEMENT


Dwg no:Drawn by: DV

Issue:

Job No: DSC-D19AREA 2 & 3 CONCEPTDate:Scale:

1:100, 1:20 26-03-20 LP_01 ISSUE - E

Page: 1 of 1







Planting Area 1










Se= Sedge T = Tree

Planting Area 2






Planting Area 3








G = Ginger P = Palm S = Shrub Se= Sedge T = Tree

Planting Area 4











EXISTING ELECTRICAL BOX


SV

EXISTING IRRIGATION BOX

STRAIGHT CURVE 'WEATHERINGSTEEL' RETAINING TO 450mm

HIGH (SHAPE OF BOAT)


EXISTING EDGE OF ROCKRETAINING TO BE REMOVED

RESIN PEBBLE SURFACE TO ALLOWTREE ROOTS TO DEVELOP

ASH TRAY

COR.SC - 5

PAN.P - 12

PHI.BM - 24

STRAIGHT CURVE 'WEATHERINGSTEEL' RETAINING TO 450mm


EXISTING EDGE OF ROCKRETAINING TO BE REMOVED EXISTING ELECTRICAL BOX

IRRIGATION BOX

EXISTING PARKING SIGN

ASH TRAY

RESIN PEBBLE SURFACETO ALLOW TREE ROOTS

TO DEVELOP

STRAIGHT CURVE CORTENSTEEL RETAINING TO 450mm


PAN.P - 12

COR.SC - 5


PHI.BM - 24




03


Dwg no:Drawn by: DV

Issue:

Job No: DSC-D19AREA 4 CONCEPTDate:Scale:

1:100, 1:20 26-03-20 LP_01 ISSUE - E

Page: 1 of 1







Planting Area 1










Se= Sedge T = Tree

Planting Area 2






Planting Area 3









Planting Area 4











Light

Light

STRAIGHT CURVE'WEATHERING STEEL'

RETAINING TO 300mm HIGH(SHAPE OF BOAT)


EXISTING MEMORIAL, CONCRETEAPRON TO REMAIN

EXPOSED AGGREGATE CONCRETE WITHDIFFERENT PEBBLE MIXES (3) TO REPRESENT

WAVES

CUSTOM MADE TIMBER BENCH SEATS x 2

PROPOSED UPLIGHTS - SOFTWHITE LIGHT TO HIGHLIGHTWHITE MARBLE - TO BOTHSIDES OF MEMORIAL

EXISTING WATER MAIN

RESIN PEBBLE SURFACE TOALLOW FIG TREE ROOTS TODEVELOP

BIKE RACK

EXISTING PARKING SIGN

CUSTOM MADE TIMBERBOLLARD: REFER DETAIL

CARSTENS MEMORIAL

COR.PS - 9

TAB.R - 1

ALP.D - 10

PAN.P - 24

PAN.P - 5

EXISTINGELECTRICAL BOX

EXISTING FIC.B

PAN.P - 16

PHI.G - 20

TO BE DONE AS A SEPARATE STAGE:PROPOSED PEDESTRIAN CROSSING SLIGHTLY

RAISED AS SPEED HUMP WITH 'WAVES' OFEXPOSED AGGREGATE DEORATIVE

CONCRETE


04

Documents

AREA 2 - Douglas Shire Council · [email protected] HORTULUS LANDSCAPE DESIGN & MANAGEMENT HORTULUS AUSTRALIA PTY LTD ABN NO 84 105 194 821 Client: DOUGLAS SHIRE COUNCIL Project: