Embed Size (px)
DESCRIPTION
The Robomart Arduino Board (ATMEGA 8A) is a microcontroller board based on the ATmega8A. It has 14 digital input/output pins, 6 analog inputs, A 16 MHz ceramic resonator, A USB connection, A power jack, An ICSP header and a reset button. It contains everything needed to support the microcontroller, Simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Robomart Arduino Board Atmega8A is differs from all preceding boards in that it does use the PL2303 USB-to-serial driver chip. It has features to program Atmega8A as a USB-to-serial converter.https://www.robomart.com/buy-arduino-board-atmega-8a-india-price
Citation preview
ARDUINO UNO ATMEGA8
By
RM1115
Introduction of Arduino UNO Atmega8
The Robomart Arduino Board (ATMEGA 8A) is a microcontroller board based on the ATmega8A.
This is the latest revision of the basic Arduino USB board. It connects to the computer with a standard USB cable and contains everything else you need to program and use the board.
It can be extended with a variety of shields: custom daughter-boards with specific features.
It is similar to the Duemilanove, but has a different USB-to-serial chip the ATMega8U2, and newly designed labeling to make inputs and outputs easier to identify
Pin out of Arduino Uno Atmega8
RM1115
Features of Arduino UNO Atmega8
Microcontroller : ATmega8 Operating Voltage : 7-12V Input Voltage (recommended) : 7-12V Digital I/O Pins : 14 (of which 3 pin provide PWM output) Analog Input Pins : 6 DC Current per I/O Pin : 40 mA Flash Memory : 8 KB of which 0.5 KB used by boot loader SRAM : 2 KB EEPROM : 512 Bytes Clock Speed : 16 MHz
Contact Us
B5 C Block Sector 31, Above Indian Overseas BankNoida Uttar Pradesh 201301
India
Mob. +91-8744000555Tel. +91-120- 4317229
Email ID [email protected]. https://www.robomart.com
