2
100% NOT GREATER THAN NON PRIMARY MATERIALS 70% 3 Kg 19-25 Kg ALPHACRETE ® PHOENIX ARCHITECTURAL MASONRY SPECIFICATION Coarse, rugged ‘riven-faced’ natural hewn stone appearance Features & Benefits ° Has a rugged, riven-faced natural stone appearance. ° Durable and cost-effective - add prestige without the cost. ° Blend in with surrounding buildings, combining the timeless beauty of hewn stone with a low maintenance finish. ° Available in multiple tones and a two-coloured masonry unit to emulate the character and warmth of natural materials.. ° An economical and maintenance free alternative to other external finishes. ° A comprehensive selection of special shapes is available for detailing purposes. ° AG source aggregates from our own quarries located at Fivemiletown, Belcoo and Pomeroy. Sustainability Data ENERGY USE: 100% renewable WATER USED: 100% rain water harvesting RECYCLABLE: 100% of this product can be recycled MANUFACTURING Produced in the UK from LOCATION: locally sourced materials NON-PRIMARY: Not greater than 70% WASTE WOOD & PLASTIC: 100% recycled CARBON FOOTPRINT: 19 - 25 Kg CO 2 / m 2 CARBON REDUCTION: 3 Kg CO 2 / m 2 BREEAM #: ‘A’ Rating - in accordance with the BRE Green Guide to Specification. # Building Research Establishment’s Environmental Assessment Method. Sienna Veronese Venetian Red COLOURS: All colours made to order (minimum quantity required). Francesco Ash Minerva Basalt Verona Sand Ernestone Buff Baroque Terracotta Classico Blanco Palazzo Sepia Pantheon Amber

ARCHITECTURAL MASONRY SPECIFICATION - Acheson · ARCHITECTURAL MASONRY SPECIFICATION ... ° An economical and maintenance free alternative to other external finishes. ... BS EN 771-3:

Embed Size (px)

Citation preview

Page 1: ARCHITECTURAL MASONRY SPECIFICATION - Acheson · ARCHITECTURAL MASONRY SPECIFICATION ... ° An economical and maintenance free alternative to other external finishes. ... BS EN 771-3:

100%

3

NOT GREATER THAN

NON PRIMARYMATERIALS

70%3 Kg19-25 Kg

ALPHACRETE® PHOENIXARCHITECTURAL MASONRY SPECIFICATION

Coarse, rugged ‘riven-faced’ natural hewn stone appearance

Features & Benefits° Has a rugged, riven-faced natural stone appearance.

° Durable and cost-effective - add prestige without the cost.

° Blend in with surrounding buildings, combining the timeless beauty of hewn stonewith a low maintenance finish.

° Available in multiple tones and a two-coloured masonry unit to emulate thecharacter and warmth of natural materials..

° An economical and maintenance free alternative to other external finishes.

° A comprehensive selection of special shapes is available for detailing purposes.

° AG source aggregates from our own quarries located at Fivemiletown, Belcooand Pomeroy.

Sustainability DataENERGY USE: 100% renewable

WATER USED: 100% rain water harvesting

RECYCLABLE: 100% of this product can be recycled

MANUFACTURING Produced in the UK from LOCATION: locally sourced materials

NON-PRIMARY: Not greater than 70%

WASTE WOOD & PLASTIC: 100% recycled

CARBON FOOTPRINT: 19 - 25 Kg CO2 / m2

CARBON REDUCTION: 3 Kg CO2 / m2

BREEAM #: ‘A’ Rating - in accordance with the BRE Green Guide to Specification.

# Building Research Establishment’s Environmental Assessment Method.

Sienna Veronese Venetian Red

COLOURS: All colours made to order (minimum quantity required).

Francesco Ash Minerva Basalt Verona Sand Ernestone Buff Baroque Terracotta Classico Blanco Palazzo Sepia Pantheon Amber

Page 2: ARCHITECTURAL MASONRY SPECIFICATION - Acheson · ARCHITECTURAL MASONRY SPECIFICATION ... ° An economical and maintenance free alternative to other external finishes. ... BS EN 771-3:

ALPHACRETE® PHOENIXARCHITECTURAL MASONRY SPECIFICATION

MANUFACTURE: Alphacrete® Phoenix architectural masonry blocksare manufactured from quarried limestone,cement and pigment. The coarse finish of thePhoenix range is due to the most moderncomputer-controlled manufacturing process.

PLANT OF MANUFACTURE (POM):Made at our Fivemiletown Production Plant.

STANDARDS & PERFORMANCE:Manufactured and tested to category D2 withinBS EN 771-3: 2011 - Class 2 (Length: +1 / -3mm,Width: +1 / -3mm, Height: + or - 2mm).

SPORTING GREEN: AG developed the Sporting Green colour to helpachieve the requirement as prescribed by SportEngland in the design guidance notes (section 5)February 2011. AG’s Sporting Green colour willgive sufficient contrast against sportingaccessories. Further to this, the finish of the blockwork will give a uniform look across all planesadding aesthetic value to the project.

CERTIFICATION:

ISO 14001: Environmental Management.

OSHAS 18001: Occupational Health and SafetyManagement.

CE Marking: Download our Declaration ofPerformance (DOP) data at:

www.acheson-glover.com/cemarking

SPECIFICATION REFERENCE:

NBS PLUS: 45-80-50/300 Aggregate concreteblocks

F10 Brick/ block walling - 255CONCRETE FACING BLOCKWORK

BS EN: 771-3: 2011 (category D2)

NOTES: Alphacrete masonry units are manufactured using natural stonewhich can vary slightly in tone. Where possible it is advised to orderfrom the same production run to avoid the possibility of tonevariations (shading).

We also recommend that products are selected from at least threebales, within each delivery. This will eliminate 'banding'.

Like all quality concrete products with a high cement content,Alphacrete masonry units can display the effects of efflorescence.Sometimes known as ‘white bloom’, this naturally occurringphenomenon will disappear over time and does not effect thestructural integrity of the blocks.

Care should be taken when handling Alphacrete masonry units.During transport and delivery some ‘chipping’ (up to 5%) can beexpected. These can be used for cuts and detailing.

All faces can be exposed excluding the top and bottom of the unit.

Frost ResistantT: 028 8778 8112 | www.ag.uk.com

PRODUCT DATA:product/code size in colours m2 per compressive units unit weight packs per packs per

(mm) stock available pack strength # per pack weight per pack 8 wheeler unit lorry

Phoenix P100 440x215x100 YES Francesco Ash / Minerva Basalt / Verona Sand

MTO Baroque Terracotta / Classico Blanco / 6.48 10 N/mm 64 20.5 Kg 1.3 t 13 IRE 20/GB 21Ernestone Buff / Palazzo Sepia / Pantheon Amber / Sienna Veronese / Venetian Red

Phoenix P200 440x215x140 MTO Baroque Terracotta / Classico Blanco / 4.86 10 N/mm 48 26 Kg 1.3 t 13 IRE 20/GB 21Ernestone Buff / Francesco Ash / Minerva Basalt / Palazzo Sepia / Pantheon Amber / Sienna Veronese / Venetian Red / Verona Sand

Phoenix P101 215x215x100 MTO Baroque Terracotta / Classico Blanco / 6.48 10 N/mm 128 9.5 Kg 1.3 t 13 IRE 20/GB 21Half Block Ernestone Buff / Francesco Ash / Minerva Basalt /

Palazzo Sepia / Pantheon Amber / Sienna Veronese / Venetian Red / Verona Sand

Phoenix P201 215x215x140 MTO Baroque Terracotta / Classico Blanco / 4.86 10 N/mm 96 13 Kg 1.3 t 13 IRE 20/GB 21Half Block Ernestone Buff / Francesco Ash / Minerva Basalt /

Palazzo Sepia / Pantheon Amber / Sienna Veronese / Venetian Red / Verona Sand

MTO - made to order (minimum order size / quantity required). # Additional unit strengths are available (N/mm) - please ask for more information.