ARCHITECT / CONSULTANT SANDEEP GOVALKAR DESIGN …

ARCHITECT / CONSULTANT

SANDEEP GOVALKAR DESIGN ASSOCIATES

CLIENT : NABARD, BKC

PROJECT: - PROPOSED FURNISHING WORK OF VOF NABARD HOUSE AT BKC, MUMBAI.

BILL OF QUANTITIES

Sr. Particulars Qty. Unit Rate Amount (Rs.)

A DISMANTLING & DEMOLITION

NOTE : CONTRACTOR SHALL VISIT THE SITE FOR INSPECTION BEFORE QUOTE.

1 Dismantling 150mm thick brick / siporex wall carefully by using chisel to cut & making good wall edges with

removal of existing cement plaster including removal of debris from site.

L.S.

2 Dismantling marble,granite,kota,marble mosaic, ceramic tile or other flooring & skirting etc upto bare rcc slab

(including cleaning of existing cement morter & concrete/brick bat coba waterproofing) in a manner which facilitate

laying of new flooring without undue extra expense.the rate shall include removal of debris from site.

L.S.

3 Dismantling marble,granite,kota,marble mosaic, ceramic tile or other tile dado etc.with the existing backing

plaster in a manner which facilitate fixing of new dado without undue extra expense.the rate shall include removal

of debris from site.

L.S.

4 Dismantling kitchen/pantry platform & wash basin counters of marble,granite or other materials etc.wherever

required in a manner which facilitate fixing of new dado without undue extra expense.the rate shall include

removal of debris from site.

L.S.

5 Dismantling existing doors/windows/m.s grillwork,false ceiling,air conditioning units, electrical cables / fittings,

existing plumbing fittings, pipes, m.s.jali, ci pipes & aquaguard & insectocutors fittings, mirrors, towel rods, soap

dispensers, picture frames, all fixed furnitures such as partitions etc. all existing unused lines for waste water

etc. to be removed,the rate shall include all incidental work, cutting & making good walls & floors etc.complete. as

directed by architect/project-in-charge (contractor shall visit the site for inspection before quote). the rate shall

include removal of debris from site.

L.S.

TOTAL (A)

B CIVIL WORKS

1 Providing and constructing 100mm thick Siporex masonry wall with cement mortar 1:4 (1 Cement : 4 coarse sand)

in superstructure at 1st floor including 150 mm thick RCC lintel beam in M20 on openings as per site requirement

with necessary scaffolding, curing etc. complete as directed.

30 smt

2 Providing & laying half brick masonary work (6") in cement morter 1:4 (1 cement : 4 course sand) inclu.curing all

complete in super structure above plinth level as directed.

5 smt

3 Providing and applying cement sand plaster in CM 1:4 (1 cement : 4 sand) in single coat about 20 mm thickness

with integral waterproofing compound as approved at all levels in patches on the new surface , curing of new

plaster, scaffolding, etc. complete as directed.

65 smt

4 Brick bat Coba: After carrying out the water proofing plaster as describe in "a" above, the entire sunken portion

shall then be filled with brick bat coba in cement mortar (1 cement: 3 mortar) mixed with water proofing compound

as per manufacturer's specifications to the required depth with proper process complete as directed. Care should

be taken to observe the levels so as to accommodate the offset in the floor level, if any.

22 smt

5 Supplying and applying 2 coats of membrane waterproofing layer over brick bat coba concrete surface and

allround the wall upto 600mm height from the concrete floor using pidilite make pidifin 2k or equivalent of fosroc

make as per manufacturing specifications before laying floor tiles including repairing of brick bat coba concrete

surface wherever necessary using 1:4:8 mix(1 cement, 4 sand and 8 brick bats) upto 150mm thick with integral

water proofing compound of pidilite/fosroc make including costs of all materials,equipments, labour charges,

curing etc. complete with 5 years guarantee.

50 smt

6 Providing & fixing in position the 20 mm thk. approved coloured granite jamb in two levels of 300 mm wide for

windows in 1:4 cement morter & complete the same with edge polishing. (basic rate of granite slab =rs.1500 per

sm.) .

140 rmt

7 Providing & laying platform of 675-750 mm depth(clear) and at 700mm to 800 mm ht(top)above ffl. of approved 20

mm thk granite slab laid on 20 mm thk white marble support with required cement morter base & 40 mm thk

champhered and machine polished edge facia.it shall be supported on side walls & white marble vertical supports

as shown in the drg.rate shall include the profile cutting and fixing of undercounter s.s.sink and polishing the

exposed edges of granite. a 100 mm granite facia shall be provided below the chamfered edge.(basic granite

rate=rs 1500 per sm) for kitchen / wash basin area.

16 rmt

TOTAL (B)

C FLOOR / SKIRTING/ WALL DADO FINISHES

1 Providing & fixing 800x1200 mm vitrified floor tiles in 1:4 cement morter bedding of average 25 mm thk.in proper

line and level.rate shall be inclusive of providing and laying necessary backing material and grout joint filling bal

compound of the same shade of the tiles. (basic cost of tile: 750/ sq.mt) (Area - Living cum dining area, suite

room, suite bedroom, guest bedroom, staff rest room, doctor room, kitchen, Living cum dining area, guest

bedroom 2, guest bedroom 3, guest bedroom 4) (Make: Kajaria)

175 smt

2 Installation & laying of 200 mm x 1200 mm laminated flooring as per the manufacturers specification. The flooring

work includes minimum 2 mm thk underlay. Make : Pergo , Mikasa or approved equivalent (Basic cost of tile:

150/- sqft) (Area - CMD suite room, CMD suite bedroom)

35 smt

Page 1 of 7


3 Providing & fixing antiskid floor tile(300x300) of approved colour in 1:4 cement morter bedding of average 25 mm

thk.in proper line and level.rate shall be inclusive of providing and laying necessary backing material inclu.2 coat

waterproofing after exposing the bare slab(1st coat) and above pcc/brickbat coba ( 2nd coat) before fixing the

floor tile and grout joint filling compound of the same shade of the tiles. (basic cost rs.600 per smt) (Area - Suite

room toilet , guest bedroom 1 toilet, guest bedroom 2 toilet, guest bedroom 3 toilet, guest bedroom 4 toile, living

cum dining area balcony) (Make: Kajaria)

48 smt

4 Providing & fixing approved matching floor antiskid tile skirting (with slope from 4" to 6") of approved colour .Rate

shall be inclusive of providing and laying necessary backing cement / mortar material. The rate includes costs of

all materials, equipments, labour charges, curing rubbing, washing, cleaning the surface etc. Complete as per

instructions of banks engineer / architect. (basic cost rs.600 per smt). (Area - Suite room toilet , guest bedroom 1

toilet, guest bedroom 2 toilet, guest bedroom 3 toilet, guest bedroom 4 toile, living cum dining area balcony)

(Make: Kajaria)

40 rmt

5 Providing & laying vitrified tile 100mm high skirting /riser of approved shade and make in cm 1:4 in proper line &

level.the skirting should be flushed with level of p.o.p.punning on wall with 6 mm groove .rate shall be inclusive of

providing and laying necessary cement / mortar backing material and joint filling compound (bal) of the same

shade of the tiles. (basic cost rs.750/ sq.mt). (Area - Living cum dining area, suite room, suite bedroom, guest

bedroom, staff rest room, doctor room, kitchen, Living cum dining area, guest bedroom 2, guest bedroom 3, guest

bedroom 4) (Make: Kajaria)

185 rmt

6 Supplying and fixing 18mm thick machine mirror polished granite slab of approved colour and approved texture

in 1:4 cement mortar bedding of average 25 mm thick in proper line and level including cement slurry with

required slope for flooring and filling the joints with roff/balendura make joint filling compound of the same shade

of the granite. The rate includes costs of all materials, equipments, labour charges, curing, rubbing, washing,

cleaning the surface etc. Complete as per instructions of banks engineer / architect. Etc. Complete as per design

pattern.

(Basic cost of polished granite slab rs.1800/- per smt). (Area - Lift lobby)

20 smt

7 Supplying and fixing 18mm thick machine mirror polished granite skirting having approximate width of 150mm of

approved colour and texture using cement and tile adhessive(diamond star of balendura make or equivalent)

mixture grout of average 12mm thick in the ratio 0.5:1 in proper line and level and filling the joints with

roff/balendura make joint filling compound of the same shade of the granite. The edges of skirting shall be

shamphered/moulded and polished. The rate includes costs of all materials,equipments, labour charges, curing

rubbing, washing, cleaning the surface etc. Complete as per instructions of banks engineer / architect.

(Basic cost of polished granite slab rs.1800/- per smt). (Area - Lift lobby)

30 rmt

8 Providing & fixing 300mm x 600mm of approved shade and quality for ceramic tile dado as per approved pattern

from ffl and in cm 1:4 in proper line & level as directed by the architect as shown in drawings. Rate shall be

inclusive of necessary backing material, wall plaster waterproofing and joint filling compound(bal) of the same

shade of the ceramic tiles for kitchen, toilet.(basic cost rs.450/ sq.mt). (Area - Suite room toilet , guest bedroom

1 toilet, guest bedroom 2 toilet, guest bedroom 3 toilet, guest bedroom 4 toilet, kitchen) (Make: Kajaria)

105 smt

9 Highlighter tiles - supplying and fixing digital printed ceramic glazed highlighter tile 300mm x 300mm x 10mm in

design to walls in required position using cement and tile adhessive (diamond star of Bal Endura make or

equivalent) mixture grout of average 10mm thick in the ratio 0.5:1 in proper line and level and filling the joints with

roff/balendura make joint filling compound of the same shade of the tiles. The rate includes costs of all materials,

equipments, labour charges, curing, rubbing, washing, cleaning the site etc. Complete as per instructions of banks

engineer / architect. (Basic cost of highlighter tile rs.75/- per sft) (make:h&r johnson/kajaria/rak). (Area -

Suite room toilet , guest bedroom 1 toilet, guest bedroom 2 toilet, guest bedroom 3 toilet, guest bedroom 4 toilet)

(Make: Kajaria))

10 smt

10 Supplying and fixing 18mm thick machine mirror polished granite slab of approved colour and approved texture in

1:4 cement mortar (1 cement and 4 sand) bedding of average 25 mm thick in proper line and level including

cement slurry with required slope for wall cladding and filling the joints with roff/bal-endura make polymer joint

filling compound of the same shade of the granite. The rate includes costs of all materials, equipments, labour

charges, curing, rubbing, washing, and cleaning the surface etc. Complete as per instructions of banks engineer /

architect. Etc. Complete. (Basic cost of polished granite slab rs.1800/- per smt). (Area - Lift lobby)

22 smt

TOTAL (C)

D PAINTING WORKS

This work includes removing existing paint finishes & filling the dents with approved filler putty gypsum /or

approved crack filler,binder,cleaning and making the surface dust free,preparing surfaces, applying a sealer or

primimng coat as per the manufacturer's specifications,applying two under coats and one finished coat of paint to

achieve the required finish as per the specifications etc.complete.

1 Providing and applying new 3 coats of luxury acrylic emulsion paints asian/ici/nerolac make of aproved shade to

surface as per manufacturer's specifications & including staging or scaffolding ,preparing the surface with one

coat of primer on walls ,columns & ceiling etc.final coat should be finish with roller and complete as specified &

directed.

521 smt

2 Providing and applying 3 coats of luxury designers paints / washable wallpaper (iokos / royale play make) of

aproved shade to surface as per manufacturer's specifications & including staging or scaffolding, preparing the

surface with one coat of primer on walls & ceiling etc. as specified & directed. (basic cost rs.800/ sq.mt)

30 smt

Page 2 of 7


3 Providing and applying 3 coats of luster paint asian/ici/nerolac of aproved shade/make to surface as per

manufacturer's specifications & including staging or scaffolding, preparing the surface with one coat of primer on

ceiling etc. final coat should be finish with roller and complete as specified & directed.

320 smt

4 Providing and applying 1 st quality flat Synthetic enamel paint of asian / ici / nerolac aproved shade / make to

surface as per manufacturer's specifications & including scraping the existing surface with wire brush, preparing

the surface with one coat of primer (berger / ici / nerolac etc complete as specified & directed. (Area -

)

150 smt

TOTAL(D)

E CEILING & POP PUNNING

1 Providing and fixing gypsum board false ceilings made up of g.i. frames as specified by manufacturer and 12mm

thick gypsum board with suitable suspenders fixed to the ceiling. ceiling section, perimeter channel, suspenders

etc. shall be standard sections supplied by manufacturer.spacing of intermediate channels shall be at 1200 c/c

and ceiling section at 457 mm c/c. the work includs finishing of joints, necessary offsets, applying primer, two or

more coats of plastic emulsion paints, making cutout for light fixtures, a. c. grills, diffusers etc., providing of

perimeter channels/teak beading etc. complete.

280 smt

2 Supplying and fixing suspended 12 mm thick gypsum board band of width not more than 6" for coffered false

ceiling and indirect lighting, which includes providing and fixing g.i. perimeter channels of size 0.55mm thick

having one flange of 20mm and another flange of 30mm & a web of 27mm along the perimeter with ceiling screws

fixed to brick wall / partition with the help of nylon sleeves & screws at 600 mm c/c, then suspending g.i.

intermediate channels of size 45mm x 0.9mm thick with 2 flanges of 15mm each from the soffit with g.i. and steel

expansion fasteners ony, "fasteners" shall be used for ceiling supports ony. Ceiling section of 0.55mm thickness

having knurled verb of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the

intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel

at 457 mm c/c. 12.5 tapered edge gypboard (conforming to is-2095-1982) is then screws fixed to ceiling to ceiling

section with 25mm drywait at 230 mm c/c. Additional supports for ac grill shall be fixed as per instructions and ac

plan / section / layout. *screw fixing is done mechanically with screw driver of drilling machine with suitable

attathcment. The boards are to be jointed and finished so as to have a flush look, which includes filling and

finishing the tapered and square edges of the boards with jointing compoind, paper tape. The rate includes costs

of all materials,equipments, labour charges, curing, rubbing, cleaning the site etc. Complete as per instructions of

banks engineer / architect.

Note:- For light fittings, grills diffusers and cutouts, speakers, fire detectors etc. Have to be made with the frame

of perimeter channels of size 20 x 27 x 30mm x 0.54 mm thick, supported suitable as per direction of bank's

engineer / architect / electrical & ac consultants. No additional payment will be made for this work.

267 rmt

3 Wooden Ceiling: Providing and fixing wooden ceiling made of 1 mm thick laminate of approved make, and shade

on 12 mm thick marine BWP ply fixed on a wooden frame made of second quality CP teak member of size 50mm

x 50mm placed @ 2'x2' c/c grid etc. complete as directed. The item also includes the cost of teak wood matching

beading, supports, hanger, making provision for electrical fitting and air-conditioning diffuser, grills open-able

hinged service panels with lock etc. as required in different levels/height/patterns and as per details, drawing /

views and directed by Architect.

50 smt

4 Providing and applying p.o.p. punning on walls & columns (avg.12 mm thk).the rate shall include

scrapping,levelling and preparing the surface.the rate shall be inclusive of all types of grooves above the

skirting,around the window and door frames as directed.

575 smt

TOTAL(E)

F MISCELLANEOUS ITEMS

1 Providing & laying in place synthetic door mats as per approved sample of size 900mm x 450mm 15 nos

2 Providing pest control and anti-termite treatment by appointing a specialised agency, such as PCI as per the

specifications mentioned by the bureau of indian standards and agencies specifications (whichever is higher),for

general civil,plumbing,drainage,timber/carpentry works & gypsum related works, including a 02-years guarantee

under suitable undertaking on stamp paper etc.complete as directed. (Mode of measurement to be on carpet -

area of floor & not the area of surface treated)

280 smt

3 Providing & fixing of signages for various sizes and shapes using brushed stainless steel of min.18 guage thk

brush steel finish inclu.engraving/etching of letters of reqd sizes filled with colours as per design & to be fixed with

ss screws on wall / doors.

a) Bedroom door /kitchen /toilet/guest room door (Approx size 300 x 150) 18 nos

4 Grado electronic safe Make: Godrej or approved equivalent. Basic cost of electronic safe: Rs.7350/- 4 nos

TOTAL(F)

G CARPENTARY WORKS

NOTE: Refer attached descriptions & specifications of all loose furnitures all in 1.0 mm thk core laminate finish.

1 Providing and fixing concealed in ceiling pelmet of size 150mm deep x 175mm wide with vertcals made of 19mm

thk commercial ply finished with approved laminate /colour along the walls with necessary wooden support,

t.w.edge putty & hardwares etc.

45 rmt

Page 3 of 7


2 Providing & fixing kitchen shutters in 25 mm thk marine grade board finished in approved shade 1mm thk laminate

on exposed surface and internal surface (white laminate) finished with match polished edge lipping with

framework in 50 x 35 mm teakwood sections duly matching french polished & complete as directed by architect.

2 smt

3 Providing and making sofa of overall sizes as mentioned in the drg.with back and armrests.the sofa will consist of

c.p.teakwood frame.seat base provided with flat springs and fully covered with cloth from bottom as well as

seattop & backrest.the seat and back frame work will be faced with 100mm thk.approved high density

polyurethenefoam internally and 4mm thk ply from outer side and covered with approved upholstery .a 25mm thk

wooden member as shown in the drg.shall be provided and polished in melamine.rates inclusive of all accessories

and scotch guard treatment for upholstery. (basic cost of fabric rs.600/ rmt)

a) Three seater sofa (1930mm wide x 740mm depth x 790mm height) 2 nos.

b) Two seater sofa (1330mm wide x 740mm depth x 790mm height) 2 nos.

c) Single seater sofa(860mm wide x 740mm depth x 790mm height) 4 nos.

4 Single beds (size - 0.90 x 1.85 x 0.45) with 5" mattress/headboard with 12 mm thk bwr ply backing 2 nos.

5 Double beds (size - 1.80 x 1.85 x 0.45) with 5" mattress/headboard with 12mm thk bwr ply backing 5 nos.

6 centre table as per details & specifications attached. (size - 0.97 x 0.52) 3 nos.

7 Coffee table as per details & specifications attached. (size - dia 0.80) 2 nos

8 Coffee table as per details & specifications attached. (size - dia 0.90) 2 nos

9 Dining table (six seaters) as per details & specifications attached. (size - 1.80 x 0.90) 2 nos.

10 Dining table (four seaters) as per details & specifications attached. (dia 0.90) 1 nos

11 Dining chairs as per details & specifications attached. 16 nos.

12 coffee table chair 12 nos

13 Sofa side corner table with t.wood and melamine polish as per detail & specifications attached. 3 nos.

14 Providing & fixing in position 35 mm thk solid core approved brand flush door finished with 4 mm thk. approved SF

laminate from bothside including 4"wide jamb lining for existing door frames with 12 mm thk bwr ply finished with

the approved SF laminate, melamine polished edge beading, and inclusive of heavy duty brass hinges of 100 x

25mm along with approved make cylindrical lock /mortise lock for main door and t.w.biding wherever required for

the internal door shutter and complete all as per drg.,details and as directed. complete.

a) Door (0.90 X 2.10) 11 nos

b) Door (1.00 X 2.10) 2 nos

c) Double door shutter (1.23 x 2.10) 2 nos

15 Toilet door (0.75 X 2.10) 6 nos

16 Study cum dressing table : -

Providing and fixing officer table and side table made up of 18mm thk comercial ply frame work and necessary 2"x

2" & 2"x 1 1/2" c.p.t. wood supports and bedding patti as required/ shown in the detail drawing height of the table

including side table shall be 2'-6" depth of the table shall be 2'-0" & shall have 1'-6" wide drawer unit with two

drawers fixed with approved drawer chanels, shall be made in 12mm thk commercial ply covered with 4"x 12mm

thk comercial ply finish with 1mm thk approved core laminate on the top surface & side beading as shown in detail

drawing all expose surface of the table and side table shall be finish in 1mm thk approved SF laminate. 0.8mm thk

laminate from inside of matching of the laminate shades including approved brush finish s.s. handles , brass

locks, foot rest made out of 12mm thk t.w.board etc. complete instruction as per architect.

a) (0.75 X 0.53) 2 nos

b) (1.24 x 0.53) 2 nos

17 Study table (1.10 x 0.53) 1 nos

18 Providing & making corner / side tables of mentioned sizes as per drg.table top shall consist of 12 mm thk.float

glass with chamfered edge with approved design etching. The base shall be made up of cp teak wood frame / 18

mm thk.comm.ply as directed byengineer-incharge / architect.all exposed wooden faces finished with melamine

polish or with 1mm thk. sued finish laminate for ply. All inner surfaces will be finished with natural matching french

polish complete.

11 nos

19 Mirror frames in wash basin areas :providing & fixing in position 6 mm thk 25mm bevelled edge clear mirror fixed

with 9 mm thk marine ply backing with s.s. studs and complete all as per drg., details and as directed.

4 smt

20 Providing & fixing 550mm deep 1800mm ht.wardrobe unit as per drg.and details.the storage unit should be made

out of 18mm thk. marine ply for top, sides and base, 6mm thk.marine ply back, 25mm thk block board (marine)

shutters with autoclosing hinges and t.w.lipping matching with approved laminate on all the edges. All external

surfaces to be finished in 1mm thk laminate (suede finish) of approved make division of shutters (aprox.450 mm)

shall be made equally according to the length of the storage, and complete. Rates shall be inclusive of all

necessary approved fittings like auto closing hinges, locks,concealed handles, telescopic drawer chanels, tower

bolts and any miscellaneous hardware items as per engineer-incharge / architect's instructions.

5 smt

Note :- (All loose furniture will have 1mm thk core laminate on top & side beeding & other surface will be use 1mm

thk SF laminate finish).

21 luggage rack 3 smt

22 Doctor desk (Size - 1.50 x 0.75 x 0.75) R- (Size - 1.05 x 0.45 x 0.70) 1 nos

Page 4 of 7


PROVIDING & FIXING DOCTOR TABLE WITH SIDE TABLE MADE OUT OF 1MM THK LAMINATE TOP WITH

18MM THICK MARINE PLY FRAME WORK FOR TABLE, SIDE TABLE, SIDES, TOP FRONT APRON,

SHUTTERS, UNIT SIDES, 12MM THICK MARINE PLY FOR DRAWER SIDES, KEY BOARD SIDES, SLIDING

SHUTTERS, FOOT REST, 6MM THICK MARINE PLY FOR BACK, DRAWER UNIT BACK, DRAWER BOTTOM

ETC. WITH 3" X 6MM, 1" X 1", 1 1/2" X 1 1/2" C.P.T. WOOD OF THE APPROVED LAMINATE MATCHING

COLOR BEDDING & MOULDING ETC. COMPLETE. THE TABLE FRONT SHALL HAVE 12MM THICK MARINE

PLY PANELS WITH 4" X 12MM THICK BORDER ALONG WITH ONE DRAWER UNIT WITH ONE DRAWER

FOR PENCIL TRAY, 3 NOS. OF EQUAL DAWERS, KEY BOARD DRAWER & SIDE TABLE SHALL HAVE 3"

DEEP 2 NOS. DRAWER AT TOP & SLIDING SHUTTER BELOW THE DRAWERS ETC. COMPLETE. ALL

EXPOSED SURFACES SHALL HAVE APPROVED MAKE / COLOR 1.00 MM THK LAMINATE & INSIDE

SURFACES FINISH WITH 1MM THK APPROVED LAMINATE ALONG WITH APPROVED MAKE / DESIGN

HARDWARE SUCH AS TWIN TELESCOPIC SLIDING CHANNELS, DESIGN HANDLES, BRASS HINGES,

12MM THK PLYWOOD OF 2'-0" X 1'-6" X 9" IN HEIGHT SLOPE TYPE FOOT REST FINISH WITH WOOLEN

CARPET, POWDER COATED CPU TROLLEY, SUSPENDED TYPE BRUSHED STEEL FLUSH WIRE

MANAGER, COMPLETE AS PER DETAIL DRAWING & INSTRUCTIONS OF THE ARCHITECT / ENGINEER -

IN - CHARGE.

23 patient single bed (size - 0.90 x 1.85) 1 nos

24 crockery unit (size - 1.80 x 0.60) 2 nos

25 display unit (size - 1.24 x 0.33 x 0.75) 2 nos

26 dressing table (size - 0.53 x 0.62) 1 nos

27 Full height storage 3 smt

PROVIDING AND FIXING 16" DEEP STORAGE UNITS OF DIFFERENT HEIGHTS OUT OF 19 MM TH.

MARINE PLY SIDES AND SHELVES AND SHUTTERS AND 6 M TH. MARINE PLY BACKING AS PER DETAIL

DRAWING. ALL SHUTTERS TO BE FIXED WITH 3 NO. 4" X 3/4" BRASS HINGES, BRUSH FINISHED S. S.

HANDLES AND LOCKING ARRANGEMENT. ALL EXPOSED & INSIDE SURFACES TO BE FINISHED WITH 1.0

MM THK FINISH APPROVED LAMINATE.

28 Aluminum sliding glazed window 45 smt

REMOVING OLD EXISTING AND PROVIDING NEW ALUMINIUM SLIDING WINDOW WITH ANODISED

SECTIONS COATING OF GRADE AC 15.PROVIDING AND FIXING ALUMINIUM SECTION SHALL BE HEAVY

DUTY (116 x 36.5mm. IN 1.60 MM THICK FOR BOTTOM FRAME AND 116 x 25mm. IN 1.60 MM THICK FOR

TOP & SIDE FRAMES ) OF APPROVED MAKE WITH 6 MM THK.MODIGUARD / SAINT GOBAIN / ASAHI

MAKE TINTED FLOAT GLASS AND IMPORTED BEADING SHALL BE USED.HEAVY DUTY 50mm

THK.FRAME OF 14 GUAGE .COMPLETE THE SAME AS DIRECTED & AS PER DETAILS

ATTACHED.NOTE:RATE SHALL BE INCLUSIVE OF NECESSARY FITTINGS,LOCKS, HANDLES, BEST

QUALITY ROLLERS, NECESSARY HARDWARE ITEMS WITH A ADDITIONAL FIXED MOSQUITO NETLON

JAALI FRAME ETC. JINDAL -SERIES "D"SECTION NO.20673 WITH 1.619 KG/M / INDAL / HINDALCO MAKE

& AS PER DETAILS SHOWN AND DIRECTED BY ARCHITECT.

29 Aluminum glazed fixed window 25 smt

PROVIDING NEW ALUMINIUM GLAZED FIXED WINDOW WITH ANODISED SECTIONS COATING OF GRADE

AC 15.PROVIDING AND FIXING ALUMINIUM SECTION SHALL BE HEAVY DUTY (116 x 36.5mm. IN 1.60 MM

THICK FOR BOTTOM FRAME AND 116 x 25mm. IN 1.60 MM THICK FOR TOP & SIDE FRAMES ) OF

APPROVED MAKE WITH 6 MM THK.MODIGUARD / SAINT GOBAIN / ASAHI MAKE TINTED FLOAT GLASS

AND IMPORTED BEADING SHALL BE USED.HEAVY DUTY 50mm THK.FRAME OF 14 GUAGE .COMPLETE

THE SAME AS DIRECTED & AS PER DETAILS ATTACHED.NOTE:RATE SHALL BE INCLUSIVE OF

NECESSARY FITTINGS,NECESSARY HARDWARE ITEMS ETC. JINDAL -SERIES "D"SECTION NO.20673

WITH 1.619 KG/M / INDAL / HINDALCO MAKE & AS PER DETAILS SHOWN AND DIRECTED BY

ARCHITECT.

30 TOUGHNED GLASS PARTITION 10 smt

Providing and fixing full height glazed parition made out of 12mm thick toughned approved make glass as per

drawing. The work includes machine edge polish with approved make (ozone/Dorma XL-C/ Enox/ Archis) patch

fitting with required hardware complete.( all hardware & patch fittings to be finished with s.s brushed /Antique

brass finish).

31 Louver window 5 smt

Supplying and fixing 16 guage aluminium powder coated ( minimum 50micron powder coating) ventillator frame of

size 50mmx25mm with adjustable aluminium 100 mm size louvers and provided with with 100mm wide and 5mm

thick pinned glass. External face of ventillator shall be covered with GI rat mesh fixed in 25mmx12 mm, 16guage

alumnium powder coated frame with f channel and to be fixed on the wall. The rate including costs of all materials

including non corrossive fastners, labour charges, scaffolding, cleaning etc. Complete

32 CHAIR COMPANY NAME - (FEATHERLITE / GODREJ / CHARMI / DURIAN)

* Base- 5 Prongs glass filled nylon stand.

* Castors- Twin wheel type Nylon castor.

* Height adjustment- Imported gas lift mechanism.

* Mechanism- Imported synchro tilt mechanism with multi angle locking facility.

* Seat and back cushions- Made out of soft moulded poyurethane foam of 48 density.

* Handles- cold cure moulded soft polyurethane.

* Fabric (BASIC RATE RS.650- RMT)/ foam leather- As approved by the archittect/ bank engineer.

a Doctor chair 1 nos

b Doctor visitor chairs 2 nos

33 PERFORATED CHAIRS( COMPANY NAME - DEXTON / INERTIA / FEATHERLITE / CHARMI / GODREJ) 2 nos

SUPPLYING & INSTALLING PERFORATED POWDER COATED METALLIC CHAIRS WITH CUSHION OF

APPROVED DESIGN /SHADE (SET OF 2 CHAIRS)

TOTAL(G)

Page 5 of 7


H FURNISHING & MISCELLANEOUS WORKS

1 Beautifully stitched window american pleated curtains with black out lining and heavy duty approved aluminum

channels. (basic rate of curtain= 850.00rmt), complete as per architects direction

70 rmt

2 Artefacts & artworks/painting etc. 10 nos

3 Beautifully stitched window polyster sheer curtains with approved heavy duty aluminum channels. (basic rate of

curtain= 225.00rmt) complete as per architects direction

70 rmt

TOTAL(H)

I SANITARY FITTINGS & FIXTURES (CONCEALED PLUMBING WORKS) WITH NECESSARY MATERIALS

INCLU.CONNECTING THE EXISTING WATER SUPPLY LINES & DRAINAGE LINES. COMPLETE. (JAQUAR

MAKE - CONTINENTAL RANGE)

1 Removal of existing and providing & fixing of new overhead shower of jaquar make (model no. ohs-1813 .basic

cost:rs.4100)with s.l. concealed diverter for bath/shower (model no. con-421. basic cost rs.2100 & bathtub spout

with flange (model no.kub-chr-35429. basic cost.rs.1240.00) inclu. labour with all required plumbing materials,

cutting, grooving, making the good walls & floor etc. complete.

6 nos

2 Removal of existing and providing and fixing of new vitrous chinaware EWC-wall hung with C.I chair Bracket and

cover complete as approved make (Glazed earthware water closet pan) of any ISI make or equivalent of colour

and design as approved by the architect. (BASIC COST OF W.C. = RS.11,900/PC)

6 nos

3 Providing and fixing conceal cistern the details of the concealed portion of the cistern with slim body, floor

mounting frame and installation with control plate white/ chrome finish as approved by architect/ bank

engineer.(BASIC COST = RS 8700)

6 nos

4 Providing and fixing of new approximated size 385X385X130mm glazed viterous earthware hand wash basin

(counter- top mounted) of approved make such as parryware/euro/neycer/hindware/jaquar of white colour,

attached jaquar angle cock, fixing and supply of CI bracket, rubber plugs, thick CP chain, CP inlet connection

including 32mm CP european type botle trap of jaquar with 300mm wall connection pipe of jaquar make

includingCP waste coupling, cutting floors, drilling holes in the wall and making good the damages etc.. complete

as directed by the architect / bank engineer. (BASIC COST OF BASIN = RS.7,500/-PC)

6 nos

4a Providing and fixing of new approximated size 515 x 450 x 845 mm floor stand wash basin of approved make

such as parryware/euro/neycer/hindware/jaquar of white colour, attached jaquar angle cock, fixing and supply of

CI bracket, rubber plugs, thick CP chain, CP inlet connection including 32mm CP european type botle trap of

jaquar with 300mm wall connection pipe of jaquar make includingCP waste coupling, cutting floors, drilling holes

in the wall and making good the damages etc.. complete as directed by the architect / bank engineer. (model no :-

kus-wht-35401) .(Basic cost RS. = 21736 /- )

4 nos

5 Providing and fixing of new 15mm dia CP angle cock of jaquar with CP wall flange of jaquar with 15 mm CP

connector pipes for wash basins / PVC cistern for WC/ Kitchen sink with material and labour ect.

complete.(BASIC COST: RS.1400/-)

7 nos

6 P/F Jaquar jet spray in the toilet. 6 nos

7 Providing and fixing 15mm dia CP two way bib cock with CP wall flange of jaquar with 15mm CP connector pipes

for ablution tap with material and labour etc..complete (BASIC COST:RS.1900)

6 nos

8 Removal of existing and providing & fixing of 15mm dia cp bib cock with cp wall flange of jaquar with 15mm cp

connector pipes for ablution tap with material and labour etc.complete. (basic cost: rs.1900)

6 nos

9 Providing and fixing of 15mm dia CP pillar cock with SENSOTRONIC SENSOR FAUCET of jaquar with CP

connector pipes for ablution tap with material and labour etc..complete for wash basin.(BASIC COST: RS.9,000)

7 nos

9a Providing and fixing of Single Lever Extended Basin Mixer (Height-97mm)of jaquar with without Popup Waste

System with 450mm Long Braided HosesCP connector pipes for ablution tap with material and labour

etc..complete for wash basin. (model no :- kub -chr-35023fb))(BASIC COST: RS.4028/-)

4 nos

10 Providing and fixing cp stainless grating with cockroach trap for nahani trap round or square , 100 mm ci nahani

trap heavy soil quality inclu.frame with fixing of tiles cement finishing of trap ,material & labour etc. complete.

19 nos

11 Providing and fixing new CP concealed stop cock of jaquar with material and labour etc complete.

(MODEL NO: 069)

6 nos

12 Providing & fixing of new cp flush valve of jaquar with cp wall flange of jaquar with 15mm cp connector pipes for

water closet with material and labour etc.complete. (basic cost: rs.2900)

6 nos

13 P/F bottle trap of jaquar with 190 mm long wall connection pipe (basic cost: rs.1100) 6 nos

14 P/F floor matching colour pvc nahani trap with cover of approved colour & make. 19 nos

15 C.P.robe hook two way in toilet (jaquar- continental, model no: 1161n) 6 nos

16 Soap dispenser (500 ml.) of jaquar make. 7 nos

Page 6 of 7


17 Providing and fixing ci adapters with material & labour etc. complete.

18 a) 75mm Dia. 6 nos

b) 100mm Dia 6 nos

19 Providing & fixing cp towel ring 200 mm dia of jaquar with material & labour etc.complete. (MAKE:

JAQUAR) (model no: AQN-7721)

7 nos

20 Providing & fixing cp soap dish of aproved make plumber/jaquar with material & labour etc. Complete. (model no:

AKP-35731P) (MAKE: JAQUAR)

6 nos

21 Providing and fixing CP toilet roll holder with flap of jaquar with material and labour etc. Complete

(basic cost: Rs.900) (MAKE: JAQUAR) (model no: ACP-1153N)

6 nos

22 P/F towel rack 600 mm long (MAKE: JAQUAR) (model no: ACN-1181FN) 6 nos

23 P/F Jaquar soap dish holder (basic cost: Rs.500) (model no: ACN-1131N) 6 nos

24 P/F extended jaquar make kitchen tap etc. Complete. (For kitchen sinks) (model no: CQT- 23347) 1 nos

25 P/F Anti scratch range by Nirali (Elegance unique, size: 915mm x510mm, bowl depth: 190mm,

basic cost: rs.10500)

1 nos

26 P/F jaquar make towel rack 600mm long with lower hangers complete. (model no: ACN-1181N) 6 nos

27 P/F glass door for shower (MAKE: JAQUAR) 4 nos

28 P/F shower curtain (size: 5' x 6') as approved 2 nos

29 P/F doctor curtain (size 25' x 7') as approved 1 nos

30 waste bin with lid (s.s finish) (Basic cost: Rs. 1500/- ) 2 nos

31 P/F Two way robe hook (MAKE: JAQUAR) 6 nos

32 P/F master cock (MAKE: JAQUAR) 6 nos

33 single towel rail (MAKE: JAQUAR) (model no: ACN-1111NM) 7 nos

34 tussue paper roll (basic cost for a bundle of 20 packets- rs. 2000/- bundle) 6 nos

35 pvc garbage bag as approved 5 packet

36 jaquar shower panel (MAKE: JAQUAR) 14 smt

TOTAL(I)

J EXTERNAL & INTERNAL WATER SUPPLY

1 Providing materials & labour for fixing concealed in the wall including making grooves by machine following sizes

of cpvc heavy aproved make ,screwed and threaded joints with supply of necessary gi specials of aproved

"r"brand etc. specials like sockets, unions, elbow, bends, reducers, plugs, tees etc.inclu. supply of clamps and

enamel paints,hemp yarn for water tight joints inclu. hydraulic testing as per iss inclu. making holes, grooving in

walls and roof and making good the damages .complete.

a) 15 mm dia cpvc pipe 40 rmt

b) 20 mm dia cpvc pipe 40 rmt

c)32 mm dia cpvc pipe 25 rmt

2 Providing materials & labour for fixing 0n the exposed wall faces including labour, following sizes of gi heavy c-

class tata or equivalent make ,screwed and threaded joints with supply of necessary gi specials of aproved

"r"brand etc. specials like sockets, unionnuts, elbow, bends, reducers, plugs, tees etc.inclu. supply of clamps,

nails and enamel paints, hemp yarn for water tight joints inclu. hydraulic testing as per iss inclu. making holes,

grooving in walls and roof and making good the damages are bringing to good as the original including one coat

of primer & 2 coats of enamel paints as directed by the architect for flush valvesof the wcs. complete.

a) 32 mm DIA 10 rmt

3 Providing & fixing brass ball valve isi make zoloto or equivalent make with material & labour complete.

a) 15 mm dia 6 nos

b) 20 mm dia 6 nos

c) 32 mm dia 6 nos

4 Provision of additional water supply connection with aquagaurd (high flow model)(water purifier) equipped with e-

boiling and waterflow rate of 3liters/minute for special usage and required plumbing works including fittings and

fixture at pantry platform etc complete.(for water cooler)

1 nos

5 Provision of additional water supply connection with a geyser of 1 ltrs of capacity 4.5 kw

(spherehot/racold/venus/bajaj) or equivalent with plumbing works including fittings & fixtures in toilets

etc.complete.

6 nos

TOTAL(J)

K DRAINAGE

1 Providing and fixing PVC pipes (3"or 4") of supreme/ prince or equivalent in position of required size with special

fittings, traps, bends, Y's , floor and nahani traps etc including chemical sealed joints as required at site making

necessary connections with existing lines for waste water lines wherever necessary.

40 rmt

TOTAL(K)

L LESS BUYBACK

BUYBACK OF EXISTING LOOSE FURNITURES, SANITARY FIXTURES, AC UNITS INDOOR & OUTDOOR,

GLASS SHELF, LAMPS , WOODEN RAILINGS, KITCHEN SHUTTERS ETC. (CONTRACTOR MUST VISIT THE

SITE BEFORE QUOTE). - RESERVED COST FOR BUYBACK Rs. 1,80,000/- (IN WORDS :- RUPEES

ONE LAKH EIGHTY THOUSAND ONLY)

L.S -180000.00

TOTAL(L) -180000.00

TOTAL (A TO L) (Rs.)

ADD CGST 9% ON TOTAL

ADD SGST 9% ON TOTAL

TOTAL AMOUNT (Rs.)

SEAL & SIGN OF CONTRACTOR

Page 7 of 7

ARCHITECT/CONSULTANT

SANDEEP GOVALKAR DESIGN ASSOCIATES.

NAME OF CLIENT: - NABARD

ADDRESS: - PROPOSED ELECTRICAL WORK OF NABARD HOUSE VOF, B.K.C, MUMBAI.

NATURE OF WORK: - BILL OF QUANTITIES (ELECTRICAL/ DATA CABLING).

ITEM

NO.ITEM DESCRIPTION UNIT QTY RATE AMOUNT

A MCB DB

1 Supplying and fixing recessed in wall of 10way TPN (8+6+30) with Per Phase Isolation

DB's in Vertical Type, Distribution board The DB shall be made out of high quality CRCA

sheet steel and shall be pre treated and powder coated to give matt finish RAL 9010

and Should have gaskets to ensure complete IP-43 protection with Anti Insertion

Marking and spirit level to ensure the professional alignment and Door shall have

180deg opening and reversible type to avoid inconvenience during operation and

maintenance. The DB shall be as per IS-8623 part III and be suitable for 240/415 V, 50

Hz AC power supply. The DB shall be tested for a minimum dielectric strength of 2.5

kV/sec.(But without MCB/RCCB/ Isolator) Equivalent to Hager Cat Ref: VYP10DH.

Each 2

2 Supplying and fixing in existing MCBDB with connections, 63 Ampere, Four pole, MCB.

The housing of MCB shall be made from heat resistant thermoplastic material and shall

have high impact strength. The MCB shall be current limiting type (Energy Limitation

Class – 3) with 10kA breaking capacity.MCBs terminals shall have provision for DUAL

TERMINATION. MCBs shall have non breakable type Metal DIN Clip with Dual position

facility. Miniature Circuit Breaker shall comply with latest relevant IS / IEC standard

codes i.e. IS-8828-1996 & IEC – 60898. Equivalent to Hager Cat Ref : NCN463N

Each 2

3 Supplying and fixing in existing MCBDB with connections, 40 Ampere, double pole (two

module), 240 V, High Immunity (HI) Type residual current circuit breaker with over

current protection. (RCBO).

The RCBO shall comply with latest to IEC 61009 standards. RCBO shall be integral unit

suitable for operating on 240 / 415 V AC, 50 Hz electrical supply systems providing both

Over-current and Earth Leakage Protection to installation. RCBO terminals shall have

provision for DUAL TERMINATION with non breakable type Metal DIN Clip with Dual

position facility.

The RCBO should have sensitivity current of 30 mA Equivalent to Hager Cat Ref :

ADH990

Each 6

4Supply & fixing in the existing MCBDB with connections “Under and Over-voltage

protection release” fitted and latched with existing MCB/RCCBs/RCBOs.to disconnect

the circuit breaker if the voltage reduces below 170VAC or above 267 VAC. It shall also

have no tripping for Voltage less than 60VAC to avoid nuisance tripping during power

failure at the installations. Equivalent to Hager Cat Ref : MZ215

Each 6

3 Supply & fixing in existing DB, blanking plates Each 6

4 Supply & fixing in existing DB, C curve MCBs, ISI marked, 10kA breaking capacity of

following rating.

4.1 10A Each 14

4.2 16A Each 21

4.3 25A Each 13

TOTAL (A)

B WIRING (CIRCUIT & LIGHT POINT )

1 Supplying and drawing wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core stranded cable in

existing surface/ recessed medium class PVC conduit , as required.

1.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 371

1.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 344

1.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 233

2 Supplying and drawing wiring for attendent call bell alongwith with 3 X 1.5 sq. mm wire

of FRLS PVC insulated copper conductor, single core stranded cable in existing surface/

recessed medium class PVC conduit, as required.

Meter 270

3 Supplying and drawing wiring for twin control light point/ fan point (2 way) in existing

surface/ recessed medium class PVC conduit with 1.5 sq.mm FRLS PVC insulated copper

conductor single core stranded cable with surface / medium class PVC conduit, with 2

nos. 6 Amp., 2 way modular switch glossy white in existing switch plates, and loop

(neutral + earthing) the point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core stranded cable etc. as required.

Point 24

4 Supplying and drawing wiring for light point / fan point/ exhaust fan point/ call bell

point in existing surface/ recessed medium class PVC conduit with 1.5 sq.mm FRLS PVC

insulated copper conductor single core stranded cable with 1nos. 6 Amp., 1 way

modular switch glossy white with LED indicator or bell push as required in existing plate

and loop (neutral + earthing) the point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

4.1 Primary point as above Point 139

4.2 Secondary point without modular switch and looped from above primary point Point 26

5 Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.5.1 25 mm Meter 227

5.2 32 mm Meter 487

TOTAL (B)

CElectrical Sockets & switches {Approved Make - HAGER (Insista) / LEGRAND (Arteor) /

SNEIDOR (Zencelo) }

1 Supply and fixing, recessed in wall, switch boards with modular GI box with modular

plates, making all wiring connections, as required of following sizes1.1 1 module Each 43

1.2 2 module Each 4

1.3 3 module Each 32

1.4 4 module Each 1


1.6 8 module Each 5



2 Supplying and fixing following modular wiring accessories on the existing modular

plates & switch box with wires including connections etc. as required.2.1 120 W 2 module glossy white fan regulator Each 12

2.2 6 A 1 module glossy white bell push switch with LED indicator for attendant call bell Each 11

2.3 6 A , 1 module, 1 way switch glossy white with LED Each 78

2.4 6A, 5 pin 2 module, glossy white universal socket Each 78

2.5 1 module glossy white RJ11 single phone outlet Each 11

2.6 1 module glossy white Co-Axial TV socket Each 9

2.7 2 module Glossy white buzzer Each 10

2.8 2 module 10/ 25 A glossy white socket Each 11

2.9 1 module 20A 1 way switch glossy white with LED Each 20

2.10 1 module glossy white RJ 45 cat 6 single information outlet Each 10

2.11 1 module glossy white blanking plate Each 129

2.12 2 module 6/16 A glossy white protruded socket Each 9

3 Supply and fixing, recessed in wall, weatherproof switch boards with modular 4 module

IP55 horizontal flush box with ring white with 2 module IP 55, 10A single switch , white

with 2 module IP55 adapter with transparent flap, white with 2 module 6 A, 5 pin

glossy white universal socket making all wiring connections, as required

Each 6

TOTAL (C)

D VOICE & DATA CABLING

1 Supplying and drawing 2 Pair, 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed PVC conduit as required.

Meter 241

2 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned copper braid and

protected with PVC sheath in the existing surface/ recessed PVC conduit as required.

Meter 155

3 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed PVC conduit as required.

Meter 241

4 Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the same in

case of recessed conduit as required.3.1 25 mm Meter 382

3.2 32 mm Meter 382

5 Supply and fixing on the wall 1nos of Wall mounted 6 U network rack (Dlink/Digilink)

with 1 nos. 24 port jack panel (Dlink/Digilink) and terminating all cat 6 cables in the jack

panel with ferrules as required.

Each 1

6 Supply and fixing on the wall 1 nos. PVC krone box suitable for 20 pair krone modules

with 2 nos. Steel Back Mounting Krone Module Frame for 10 Krone Module with 2 nos.

10 Pair Krone Module with terminating all phone cable with ferrules as required

Each 1

TOTAL (D)

E LIGHT FIXTURE1 Supply and fixing on existing ceiling fan hook, ceiling fan 1200 mm sweep, white, crompton

high speed, with all accessories but without regulator with fixing on existing ceiling fan hook

with wires and connection to ceiling fan point as required

Each 6

2 Supply and fixing on ceiling ,ceiling fan 1200 mm sweep, white, crompton high speed, with all

accessories but without regulator with anchor dash fastners and ceiling fan hook for fixing on

ceiling with wires and connection to ceiling fan point as required

Each 6

3 Supply and fixing exhaust fan 225-230 mm sweep, grey colour, Crompton, MS metal body and

blade double ball bearing, metal grill guard on wall/ window with wires and connection to

exhaust fan point as required

Each 1

4 Supply and fixing exhaust fan 150 mm sweep Crompton mountair square profile white colour

on window/ wall with wires and connection to exhaust fan point as required

Each 6

5 Supply and fixing in existing cove LED strip light 3000 K, 4 watt per meter GM modular catalog

ref : RAD20-2835-7LM-WW with aluminium profile with driver and with all acessories with

wires and connection to light point as required

meter 113

6 Supply and fixing in existing false ceiling cove, LED strip light 6000 K, 4 watt per meter GM

modular catalog ref : RAD20-2835-7LM-WH with aluminium profile with driver and with all

acessories with wires and connection to light point as required

meter 14

7 Supply and fixing in existing false ceiling recessed LED square downlight white bezel 3000K GM

modular cat ref : G20-8-3K-N-RC-SQ 8 watt 760 lumens with led driver and with all accessories

with wires and connection to light point as required

Each 58

8 Supply and fixing in existing false ceiling recessed LED square downlight white bezel 6000K GM

modular cat ref : G20-8-6K-N-RC-SQ 8 watt with led driver and with all accessories with wires

and connection to light point as required

Each 6

9 Supply and fixing on ceiling surface LED square downlight white body 3000K GM Modular cat.

Ref. GM 0283, PLANO 8 WATT with led driver and with all accessories with wires and

connection to light point as required

Each 5

10 Supply and fixing on ceiling surface LED round downlight white body 3000K GM Modular cat.

Ref. XZO-7-3K-N-SF-RD, XZORO 7 WATT with led driver and with all accessories with wires and

connection to light point as required

Each 2

11 Supply and fixing on wall LED up-down light 3000K 290 lumens 4 watt Panasonic cat. Ref. AUD

010043 with led driver and with all accessories and with wires and onnection to light point as

required

Each 14

12 Supply and fixing in false ceiling recessed square LED accent light 4000K 3 watt GM Modular

cat. Ref. COB G90 GM0840 with led driver and with all accessories and with wires and

connection with light point as required

Each 14

13 Supply and fixing recessed in wall LED Skirting light, glossy white, 6 lumens 350 mWatt Hager

Cat. Ref. WSNHS62 with 2 module recessed GI wall box with plates and with all accessories and

with wires and connection to light point as required

Each 11

14 Supply and fixing recessed on wall, attendant station with 1 nos. 18 module plastic fire resistant

gang box and 1 nos. 16 module plastic fire resistant gang box with 1 nos. 18 module cover plate

and support frame black colour with 1 nos. 16 module cover plate and support frame black

colour with 11 nos. 2 module electronic buzzer (GM Modular cat. ref. AA 2 049) with 11 nos. 1

module bell indicator display unit reset switch name plate (GM Modular cat. ref. AA 1 050) with

blanking plate and making all necessary connections with all accessories with labeling for room

identification as required

Each 1

15 Supply and fixing on wall LED tube light 4000K 5 watt, GM Modular Cat. Ref. NEBULUS GM0143

with integral LED driver with all acessories and with wires and connection to light point as

required

Each 24

16 Supply and fixing on wall, LED table lamp having adjustable cone, white body colour 5000-

6000K with integral led driver and with wires and connection to light point as required. (Basic

cost of table lamp Rs. 4500/-)

Each 5

17 Supply and fixing on wall, LED flexible goose neck reading lamp , white body colour 5000-6000K

, 3 watt, with integral led driver and with wires and connection to light point as required .(Basic

cost of reading lamp Rs. 3000/-)

Each 10

18 Supply and fixing on wall, Storage water heater 15 litre, white body colour, shock safe plug,

with hot and cold connection pipes with all accessories and connecting to inlet and outlet water

plumbing pipes as required Havells Cat Ref : Adonia Digital GHWCADTWH015.

Each 7

19 Supply and fixing on wall LED tubelight 6500K, 2200 lumens, 22 Watt, GM Modular Cat. Ref.

ATMOS GM 0378 with integral LED driver with all acessories and with wires and connection to

light point as required

Each 1

TOTAL (E)

F DISMANTLING WORK

Dismantling, removing and carting away all the existing old and removed PVC conduit pipes,

Electrical fixtures & fittings, PVC insulated copper wiring, Switch boards, switches, All existing

old cables and giving benefit of salvage value to the Bank.

L.S

TOTAL (F)

G LESS BUYBACK BUYBACK OF EXISTING BRANCH ELECTRICAL FIXTURES, FITTINGS, GYZER, AQUAGAURD ETC.

(CONTRACTOR MUST VISIT THE SITE BEFORE QUOTE). - RESERVED COST FOR BUYBACK Rs.

25,000/- (IN WORDS :- RUPEES TWENTY FIVE THOUSAND ONLY)

NOTE : Any LED tubes and over voltage relays will have to be handed over to the Bank.

L.S

TOTAL (G)

TOTAL (A TO G)

ADD 9% CGST

ADD 9% SGST

TOTAL COST (Rs.)

SEAL & SIGN OF CONTRACTOR

ARCHITECT / CONSULTANT


CLIENT : NABARD

PROJECT: - PROPOSED AIR CONDITIONING WORK OF NABARD HOUSE VOF AT BKC.

BILL OF QUANTITIES

SR.

NO.ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1 SPLIT AIR-CONDITIONERS:

Supply & Installation Testing & commissioning of Aircooled cassettte type

Ductable Airconditioners comprising Indoor Air Handling Unit, Outdoor

Condensing unit, isolating valves, thermostatic control, safety cutouts,

(condensor mounting stand excluded) and vibration isolation pads. (MAKE :

Bluestar/Daikin/Hitachi/carrier ). 100% copper condencor 3 star rating

1.1 1.5 TR split ac 3 star 0 NOS.


SUB TOTAL INCLUDING GST @ 28%

2 REFRIGERANT PIPING

Installation and Commissioning of hard/soft copper Refrigerant piping,

complete with fittings, elbows, bends, supporting arrangement on walls, cable

trays/trenches.

2.1 1.5 TR split ac 3 star (Size 1/2 x 1/4) with approved insulation 0 RMT.

2.2 2.0 TR split ac 3 star (Size 5/8 x 1/4) with approved insulation 0 RMT.

SUB TOTAL

3mtr refrigeration piping, drain piping, cabling should

be given free of cost. (for split ac)

3 Supply, and installation of M.S.Fabricated Type Out Door Stand for outdoor

units with vibration isolation pads.



SUB TOTAL

4 DRAIN PIPING

Condensate Drain Water piping constructed out of PVC / HDPE hard pipes,

fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves,

hangers, supports, anchors.

4.1 25 mm nom. Dia 85 RMT

4.2 32 mm nom. Dia 180 RMT

SUB TOTAL

5 ELECTRICAL CABLING

5.1 Providing and laying electrical cabling for indoor to outdoor 1.5 tr split AC 45 RMT

5.2 Providing and laying electrical cabling for indoor to outdoor 2.0 tr split AC 30 RMT

SUB TOTAL

6 TESTING & COMMISSIONING: Testing & commissioning of Air

Conditioers comprising indoor unit and outdoor condensing unit with

nitogen pressure testing, Vacumising & Gas chargings

Page 1 of 2

SR.

NO.ITEM DESCRIPTION QTY UNIT RATE AMOUNT

6.1 1.5 TR split ac 3 star 0 NOS

6.2 2.0 TR split ac 3 star 0 NOS

SUB TOTAL

SEAL AND SIGN OF CONTRACTOR

TOTAL (RS.)

ADD CGST @ 9%

TOTAL (RS.)

ADD SGST @ 9%

Page 2 of 2


Architects Interiors Landscape Designers & Project Consultants

A3, 301/302 , SHIVCHHAYA , GILBERT HILL ROAD,ANDHERI-WEST,MUMBAI-58.

Email: [email protected], Cell: +91-9969699169

PROPOSED FURINISHING & RENOVATION OF NABARD GUEST HOUSE VOF AT BKC,MUMBAI.

FURNITURE LAYOUT






RENDERED FURNITURE LAYOUT






CEILING WITH ELECTRICAL LAYOUT






3D VIEWS FOR NABARD HOUSE VOF AT B.K.C, MUMBAI










CORIDOOR 3D VIEWS FOR NABARD HOUSE VOF AT

B.K.C, MUMBAI

GRANITE FLOOR PATTERN

CONSOLE UNIT- 2

ARTWORKCONSOLE UNIT- 1WELCOME WALL LIGHTACTUAL CORIDOOR VIEW


Documents

ARCHITECT / CONSULTANT SANDEEP GOVALKAR DESIGN …