SECTION 08557METAL CLAD WOOD WINDOWS AND PATIO DOORS

JELD-WEN W-2500 Series

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2013 - 2015 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Aluminum Clad Wood Windows of the Following Types:1. Awning windows.2. Casement windows.3. Double-hung windows.4. Fixed windows.5. Radius and geometric windows.6. Sliding patio doors.7. Swinging patio doors.

1.2 REFERENCES

A. Window and Door Manufacturers Association (WDMA):1. WDMA I.S.4; Water Repellent Preservative Non-Pressure treatment for Millwork2. AAMA/WDMA/CSA 101/I.S.2/A440 - North American Fenestration

Standard/Specification for windows, doors, and skylights (NAFS)

B. National Fenestration Rating Council (NFRC):1. NFRC 100 - Procedure for Determining Fenestration Product U-Factors.2. NFRC 200 - Procedure for Determining Fenestration Product Solar Heat Gain

Coefficient and Visible Transmittance at Normal Incidence.

C. ASTM International (ASTM):1. ASTM E330 Standard Test Method for Structural Performance of Exterior Windows,

Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference.

1.3 SUBMITTALS

A. Submit under provisions of Section 01300 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Shop Drawings: Submit shop drawings indicating details of construction, flashings and relationship with adjacent construction.

D. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

08557-1

E. Quality Assurance Submittals:1. Design Data, Test Reports: Provide manufacturer test reports indicating product

compliance with indicated requirements.

F. Closeout Submittals: Refer to Section 01700 - Execution and Closeout Requirements.

1.4 QUALITY ASSURANCE

A. Installer Qualifications: Minimum 2 years installing similar assemblies.

B. Mock-Up: Provide a mock-up for evaluation of installation techniques and workmanship.1. Mock-ups shall incorporate surrounding construction, including wall assembly

fasteners, flashing, and other related accessories installed in accordance with window manufacturer's approved installation methods.

2. Do not proceed with remaining work until workmanship is approved by Architect.3. Rework mock-up as required to produce acceptable work.4. At Substantial Completion, approved mockups may become part of completed work.5. Demolish mockups and remove from site.

C. Pre-installation Meeting: Conduct pre-installation meeting on-site two weeks prior to window installation start.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.

B. Deliver and store assembly materials and components in manufacturer's original, unopened, undamaged containers with identification labels intact. Protect from damage.

1.6 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.7 WARRANTY

A. Manufacturer standard warranty indicating that the window unit will be free from material and workmanship defects from the date of manufacture for the time periods indicated below:1. Basic Product Coverage - Window Unit: 20 years.2. Basic Product Coverage - Patio Door Unit: 20 years.3. Cladding Finish: 10 years against peeling, checking, cracking caulk or color change.4. Insulated Glass: 20 years.5. AuraLast Protection for wood products:

a. Owner-Occupied Single-Family Residence: As long as you own and occupy your residence.

b. Commercial: 20 years.c. Coverage is for wood decay and/or termite damage in pine wood components.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: JELD-WEN, Inc., which is located at: 2645 Silver Crescent Dr.; Charlotte, NC 28273 ; Toll Free Tel: 800-535-3936; Tel: 541-850-2606; Fax: 541-851-4333; Email:request info (Architectural_Inquiries@jeld-wen.com); Web:http://www.jeld-wen.com/en-us

08557-2

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600 - Product Requirements.

2.2 ALUMINUM CLAD WOOD WINDOWS AND PATIO DOORS - GENERAL

A. Design Requirements1. Compliance: Provide assemblies capable of complying with requirements indicated,

based on testing manufacturer's units that are representative of those specified.2. Test Size: In compliance with requirements of AAMA/WDMA/CSA 101/I.S2/A440.3. Structural Requirements: Provide assemblies complying with requirements indicated:

a. Performance Class: As indicated on drawings.b. Performance Class: ________.c. Performance Grade: As indicated on drawings.d. Performance Grade: ________.

4. NFRC Requirements: Provide assemblies complying with the following total window ratings:a. U-Factor: ________ in accordance with NFRC 100.b. Solar Heat Gain Coefficient (SHGC): ________ in accordance with NFRC 200.c. Visible Transmittance (VT): ________ in accordance with NFRC 200.

B. Installation Accessories:1. Flashing: Refer to Section 07600 - Flashing and Sheet Metal.2. Sealants: OSI Sealants by Henkel Corporation.3. Sealants: Refer to Section 07920 - Joint Sealants.4. Sealants: Manufacturer recommended sealants to maintain watertight conditions.

C. Materials:1. Exterior Cladding: Roll formed sash with extruded frame.2. Interior Wood: AuraLast Pine.

D. Finishes:1. Interior Finish for Windows:

a. Standard Sash:1) Finish: Natural; Standard.2) Finish: Painted White Frame/ Sash.3) Finish: Natural Frame/ Painted White Sash.4) Finish: Primed.5) Finish: Clear Lacquer.6) Finish: Pre-finished paint.

a) Color: As Selected by Architect.b) Color: Brilliant White.c) Color: Desert Sand.d) Color: Ivory.e) Color: Black.f) Color: Dove.g) Color: Gunmetal.h) Color: Black Frame/Brilliant White Sash.i) Color: Brilliant White Frame/Black Sash.

7) Finish: Pre-finished stain finish.a) Color: As Selected by Architect.b) Color: Cordovan.c) Color: Fruitwood.d) Color: Walnut.e) Color: Americano.f) Color: Charcoal.

08557-3

g) Color: Kodiak.b. Traditional Sash:

1) Finish: Natural; Standard.2) Finish: Painted White.3) Finish: Primed.4) Finish: Clear Lacquer.5) Finish: Pre-finished paint.

a) Color: As Selected by Architect.b) Color: Brilliant White.c) Color: Desert Sand.d) Color: Ivory.e) Color: Black.f) Color: Dove.g) Color: Gunmetal.h) Color: Black Frame/Brilliant White Sash.i) Color: Brilliant White Frame/Black Sash.

6) Finish: Pre-finished stain finish.a) Color: As Selected by Architect.b) Color: Cordovan.c) Color: Fruitwood.d) Color: Walnut.e) Color: Americano.f) Color: Charcoal.g) Color: Kodiak.

2. Exterior Finishes for Windows:a. Standard Sash:

1) Color: As selected by Architect.2) Color: Brilliant White.3) Color: Chestnut Bronze.4) Color: Desert Sand.5) Color: French Vanilla.6) Color: Hartford Green.7) Color: Mesa Red.8) Color: Black.

b. Traditional Sash:1) Color: As selected by Architect.2) Color: Brilliant White.3) Color: Chestnut Bronze.4) Color: Desert Sand.5) Color: French Vanilla.6) Color: Mesa Red.7) Color: Black.8) Color: Hartford Green.9) Color: Silver.10) Color: Dark Chocolate.

3. Interior Finish for Sliding Patio Doors:a. Finish: Natural; Standard.b. Finish: Primed.c. Finish: Clear Lacquer.d. Finish: Pre-finished paint.

1) Color: As Selected by Architect.2) Color: Brilliant White.3) Color: Desert Sand.4) Color: Ivory.5) Color: Black.6) Color: Dove.

08557-4

7) Color: Gunmetal.8) Color: Black Frame/Brilliant White Sash.9) Color: Brilliant White Frame/Black Sash.

e. Finish: Pre-finished stain finish.1) Color: As Selected by Architect.2) Color: Cordovan.3) Color: Fruitwood.4) Color: Walnut.5) Color: Americano.6) Color: Charcoal.7) Color: Kodiak.

4. Interior Finish for Swinging Patio Doors:a. Finish: Natural; Standard.b. Finish: Primed White.c. Finish: Primed.d. Finish: Clear Lacquer.e. Finish: Pre-finished paint.

1) Color: As selected by Architect.2) Color: Brilliant White.3) Color: Ivory.4) Color: Desert Sand.5) Color: Black.6) Color: Dove.7) Color: Gunmetal.8) Color: Black Frame/Brilliant White Sash.9) Color: Brilliant White Frame/Black Sash.

f. Finish: Pre-finished stain finish.1) Color: As Selected by Architect.2) Color: Cordovan.3) Color: Fruitwood.4) Color: Walnut.5) Color: Americano.6) Color: Charcoal.7) Color: Kodiak.

5. Exterior Finishes for Sliding Patio Doors:a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Chestnut Bronze.d. Color: Desert Sand.e. Color: French Vanilla.f. Color: Mesa Red.g. Color: Black.h. Color: Hartford Green.i. Color: Silver.j. Color: Dark Chocolate.

6. Exterior Finishes for Swinging Patio Doors:a. Color: As selected by Architect.b. Color: Brilliant White.c. Color: Chestnut Bronze.d. Color: Desert Sand.e. Color: French Vanilla.f. Color: Mesa Red.g. Color: Hartford Green.

2.3 ALUMINUM CLAD WOOD WINDOW ASSEMBLIES

08557-5

A. Basis of Design: Aluminum-clad wood window assemblies as manufactured by JELD-WEN, Inc.1. Window Type:

a. Awning windows.b. Casement windows.c. Double-hung windows.d. Fixed windows.e. Radius and Geometric Windows.

B. Window Fabrication:1. Window Type: Awning windows.

a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock.b. Sash: Corner joints mortise-and-tenon, and mechanically fastened.c. Glass: Mounted using silicone glazing compound.

2. Window Type: Casement windows.a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock.b. Sash: Corner joints mortise-and-tenon, and mechanically fastened.c. Glass: Mounted using silicone glazing compound.

3. Double-Hung Windows:a. Frame: Reinforced nylon corner locks in head frame, and all corners injected

with sealant.b. Sash: Corner joints mortise-and-tenon, and mechanically fastened.c. Glass: Mounted using silicone glazing compound.

4. Fixed Windows:a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock.b. Sash: Corner joints mortise-and-tenon, and mechanically fastened.c. Glass: Mounted using silicone glazing compound.

5. Radius and Geometric Windows:a. Frame: Corner joints are injected with sealant over reinforced nylon corner lock.b. Sash: Corner joints mortise-and-tenon, and mechanically fastened.c. Glass: Mounted using silicone glazing compound.

C. Frames:1. Wood: Select kiln-dried pine AuraLast treated wood.2. Casement, Awning, and Radius and Geometric Windows Base Frame: 3-3/16 inch (81

mm).3. Double-Hung Windows Base Frame: 4-9/16 inch (116 mm).4. Jamb Width: 4-9/16 inch (116mm).5. Cladding: 0.045 to 0.060 inch (1.27 to 1.52 mm) extruded aluminum.

D. Sashes:1. Wood: Select kiln-dried pine AuraLast treated wood.2. Cladding: 0.024 inch (0.61mm) roll-formed aluminum.3. Sash Thickness - Awning Windows: 1-11/32 inches (34 mm).4. Sash Thickness - Casement Windows: 1-11/32 inches (34 mm).5. Sash Thickness - Double-Hung Traditional 1-9/32 inches (33 mm).6. Sash Thickness - Double-Hung Standard: 1-11/32 inches (34 mm).

E. Exterior Trim:1. Nailing Fin: Integral extruded aluminum on all four sides of frame.2. Nailing Fin: No Drip cap/No Nail Fin.3. Casing: Extruded Aluminum Brickmould Casing.4. Casing: Extruded Aluminum Adams Casing.5. Casing: Extruded Aluminum 3-1/2 inches (88.5 mm) Flat Casing.

F. Factory Applied Extension Jambs: Provide on four sides of frame interior.1. Awning Windows: From 4 9/16 inches up to 7-15/16 inches (116 mm to 202 mm) as

08557-6

scheduled or indicated.2. Casement Windows: From 4 9/16 inches up to 7-15/16 inches (116 mm to 202 mm)

as scheduled or indicated.3. Double-Hung Windows From 5-3/4 inches up to 10-9/16 inches (146 mm to 268 mm)

as scheduled or indicated.4. Fixed Windows: From 4 9/16 inches up to 7-15/16 inches (116 mm to 202 mm) as

scheduled or indicated.5. Radius and Geometric Windows: From 4-9/16 inches up to 7-15/16 inches (81 mm to

202 mm) as scheduled or indicated.

G. Weatherstripping:1. Awning: Rigid vinyl leaf at top and sides of sash. TPE bulb at frame.2. Casement: Rigid vinyl leaf at top and sides of sash. TPE bulb at frame.3. Double-hung: Foam filled bulb at top and bottom, Flexible TPE bulb at check rail.

a. Jamb Liner Color: White; Standard.b. Jamb Liner Color: Tan.

4. Fixed: Rigid vinyl leaf at top and sides of sash. TPE bulb at frame.

H. Hardware:1. Awning Windows, Standard Sash:

a. Hinges: Concealed.b. Operator: Stainless Steel Dual Arm.

1) Awning: Stainless steel scissor type.c. Lock: Concealed.d. Handle Profile: Manual Folding Crank.e. Sash Limiter: None.f. Finish: White; Standard.g. Finish: Desert Sand.h. Finish: Chestnut Bronze.i. Finish: Polished Brass.j. Finish: Antique Brass.k. Finish: Brushed Chrome.l. Finish: Oil Rubbed Bronze.m. Finish: Gloss Black.

2. Awning Windows, Traditional Sash:a. Hinges: Concealed.b. Operator: Stainless Steel Dual Arm.

1) Awning: Stainless steel scissor type.c. Lock: Concealed.d. Handle Profile: Manual Folding Crank; Standard.e. Handle Profile: Round Handle.f. Handle Profile: T-Handle.g. Handle Profile: ADA Handle.h. Sash Limiter: None.i. Finish: White; Standard.j. Finish: Desert Sand.k. Finish: Chestnut Bronze.l. Finish: Polished Brass.m. Finish: Antique Brass.n. Finish: Brushed Chrome.o. Finish: Oil Rubbed Bronze.p. Finish: Gloss Black.

3. Casement Windows, Standard Sash:a. Hinges: Concealed.b. Operator: Stainless Steel Dual Arm.

1) Casement: Stainless steel dual arm or split arm.

08557-7

c. Lock: Concealed.d. Handle Profile: Manual Folding Crank; Standard.e. Finish: White; Standard.f. Finish: Desert Sand.g. Finish: Chestnut Bronze.h. Finish: Polished Brass.i. Finish: Antique Brass.j. Finish: Brushed Chrome.k. Finish: Oil Rubbed Bronze.l. Finish: Gloss Black.m. Sash Limiter: None; Standard.n. Sash Limiter: Window Opening Control Device ASTM F2090 Compliant.o. Sash Limiter: Permanent 4 inch (101.6mm) Limiter.

4. Casement Windows, Traditional Sash:a. Hinges: Concealed.b. Operator: Stainless Steel Dual Arm.

1) Casement: Stainless steel dual arm or split arm.c. Lock: Concealed.d. Handle Profile: Manual Folding Crank; Standard.e. Handle Profile: Round Handle.f. Handle Profile: T-Handle.g. Handle Profile: ADA Handle.h. Finish: White; Standard.i. Finish: Desert Sand.j. Finish: Chestnut Bronze.k. Finish: Polished Brass.l. Finish: Antique Brass.m. Finish: Brushed Chrome.n. Finish: Oil Rubbed Bronze.o. Finish: Gloss Black.p. Sash Limiter: None; Standard.q. Sash Limiter: Window Opening Control Device ASTM F2090 Compliant.r. Sash Limiter: Permanent 4 inch (101.6mm) Limiter.

5. Double-Hung:a. Balance: Dual helical steel spring.b. Lock: Cam Action.c. Finish: White; Standard.d. Finish: Desert Sand.e. Finish: Chestnut Bronze.f. Finish: Polished Brass.g. Finish: Antique Brass.h. Finish: Brushed Chrome.i. Finish: Oil Rubbed Bronze.j. Finish: Gloss Black.k. Sash Limiter: No Sash Limiter; Standard.l. Sash Limiter: Window Opening Control Device ASTM F2090 Compliant.

6. Fixed Windows: None.7. Radius and Geometric Windows: None.

I. Glazing for Windows:1. Strength: Annealed; Standard.2. Strength: Annealed Tempered; meets CA Urban Fire Code.3. Strength: Tempered In/Annealed Out; meets CA Urban Fire Code.4. Insulated Glass:

a. Two panes of glass utilizing a continuous roll formed stainless steel spacer and dual seal sealant.

08557-8

b. Overall Nominal Thickness: 5/8 inch (15 mm).1) Sashed Picture Units: 5/8 inch (15 mm)2) Direct Set Picture And Transoms: 3/4 inch (19 mm).

c. Glass Coating: As selected by Architect.d. Glass Coating: Low-E 366, Standard.e. Glass Coating: Low-E.f. Glass Coating: Low-E EC.g. Glass Coating: Low-E EC 366; i89 In/366 Out.h. Glass Protection: No Preserve, Standard.i. Glass Protection: Preserve.j. Air Space: Argon, Standard.k. Air Space: High Altitude; above 4000 foot elevation.

J. Combination Storm/Screens:1. Material: Extruded aluminum with twin storm panels and charcoal fiberglass screen

cloth (18 by 16 mesh) set in painted extruded aluminum frame.2. Frame Color: Brilliant White; Standard.3. Frame Color: Chestnut Bronze.4. Frame Color: Hartford Green.5. Frame Color: Dark Chocolate.

K. Interior Insect Screen:1. Material: Black BetterVue fiberglass screen cloth (18 x 18 mesh) set in a painted roll

formed aluminum frame; Standard.2. Material: Charcoal fiberglass screen cloth (18 x 16 mesh) set in painted roll formed

aluminum frame; Standard.3. Material: Black UltraVue fiberglass screen cloth (19 x 19 mesh) set in a painted roll

formed aluminum frame; Standard.4. Frame Color:

a. Color: As selected by Architect.b. Color: Brilliant White; Standard.c. Color: Black.

L. Grilles:1. Type: Simulated Divided Lites (SDL) with Perm. Wood: Standard Sash Options

a. Exterior Muntins:1) Material: Extruded aluminum permanently applied to the exterior of the

insulating glass unit.2) Profiles: Beaded.

a) Width: 7/8 inch (22 mm).3) Finish: Brilliant White.4) Finish: Desert Sand.5) Finish: Chestnut Bronze.6) Finish: French Vanilla.7) Finish: Hartford Green.8) Finish: Mesa Red.9) Finish: Black.

b. Interior Shadow Bars:1) Finish: Silver; Standard.2) Finish: Light Brown.3) No shadow bar.

c. Interior Muntins:1) Material: Clear pine permanently bonded to the interior of the insulating

glass unit.2) Profile: Beaded.3) Width: Match exterior muntin.

08557-9

4) Finish: Match interior finish.2. Type: Simulated Divided Lites (SDL) with Perm. Wood: Traditional Sash Options.

a. Exterior Muntins:1) Material: Extruded aluminum permanently applied to the exterior of the

insulating glass unit.2) Profile: Beaded:

a) Width: 7/8 inch (22 mm).b) Width: 1-1/8 inch (28.5 mm).c) Width: 1-3/8 inch (34.9 mm).d) Width: 2-5/16 inch (59 mm).

3) Profile: Putty.a) Width: 7/8 inch (22 mm).b) Width: 1-1/8 inch (28.5 mm).c) Width: 5/8 inch (15.9 mm).

4) Finish: As selected by Architect.5) Finish: Brilliant White; Standard.6) Finish: Desert Sand.7) Finish: Chestnut Bronze.8) Finish: French Vanilla.9) Finish: Hartford Green.10) Finish: Mesa Red.11) Finish: Black.12) Finish: Silver.13) Finish: Dark Chocolate.

b. Interior Shadow Bars:1) Finish: Silver; Standard.2) Finish: Light Brown.3) No shadow bar.

c. Interior Muntins:1) Material: Clear pine permanently bonded to the interior of the insulating

glass unit.2) Profile: Traditional Bead; Standard.3) Profile: Putty profile.4) Width: Match exterior muntin.5) Finish: Match interior finish.

3. Type: Simulated Divided Lites (SDL) with Full Surround Wood Grilles: Traditional Sash Options.a. Exterior Muntins:

1) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit.

2) Profile: Beaded.a) Width: 7/8 inch (22 mm).b) Width: 1-1/8 inch (28.5 mm).c) Width: 1-3/8 inch (34.9 mm).

3) Finish: As selected by Architect.4) Finish: Brilliant White; Standard.5) Finish: Desert Sand.6) Finish: Chestnut Bronze.7) Finish: French Vanilla.8) Finish: Hartford Green.9) Finish: Mesa Red.10) Finish: Black.11) Finish: Silver.12) Finish: Dark Chocolate.

b. Interior Muntins:1) Material: Removable clear pine frame with grilles that is positioned on the

08557-10

interior of the insulating glass unit.2) Profile: Modified OGEE.3) Width: Match exterior muntin.4) Finish: Match interior finish.

4. Type: Full Surround Grilles: Standard Sash Options.a. Material: Unfinished clear pine.b. Profile: Modified OGEE.c. Width: 7/8 inch (22 mm).

5. Type: Full Surround Grilles: Traditional Sash Options.a. Material: Unfinished clear pine.b. Pattern: Modified OGEE.c. Width: 7/8 inch (22 mm).d. Width: 1-1/8 inch (28.5 mm).e. Width: 1-3/8 inch (34.9 mm).

6. Type: KD Wood Grilles:a. Material: Unfinished clear pine.b. Pattern: Modified OGEE.c. Width: 7/8 inch (22 mm).

7. Type: Grilles Between the Glass (GBG): Standard Sash Options.a. Material: Made of roll formed aluminum suspended within the air cavity.b. Profile: Flat 5/8 inch (16mm).

1) Finish: Brilliant White; Standard.2) Finish: Desert Sand.3) Finish: Chestnut Bronze.4) Finish: French Vanilla.5) Finish: Hartford Green.6) Finish: Mesa Red.7) Finish: Black.8) Finish: White Ext./Desert Sand Int.9) Finish: Desert Sand Ext./White Int.

c. Profile: Contour 23/32 inch (18mm).1) Finish: Brilliant White; Standard.2) Finish: Desert Sand.3) Finish: Chestnut Bronze.4) Finish: French Vanilla.5) Finish: Black.6) Finish: White Ext./Desert Sand Int.7) Finish: Desert Sand Ext./White Int.8) Finish: White Ext./Chestnut Bronze Int.9) Finish: Chestnut Bronze Ext./White Int.10) Finish: White Ext./Black Int.11) Finish: Black Ext./White Int.12) Finish: White Ext./French Vanilla Int.13) Finish: French Vanilla Ext./White Int.14) Finish: White Ext./Mesa Red Int.15) Finish: Mesa Red Ext./White Int.16) Finish: White Ext./Dark Chocolate Int.17) Finish: Dark Chocolate Ext./White Int.

8. Type: Grilles Between the Glass (GBG): Traditional Sash Options.a. Material: Made of roll formed aluminum suspended within the air cavity.b. Profile: Flat 5/8 inch (16mm).

1) Finish: Brilliant White; Standard.2) Finish: Desert Sand.3) Finish: Chestnut Bronze.4) Finish: French Vanilla.5) Finish: Hartford Green.

08557-11

6) Finish: Mesa Red.7) Finish: Dark Chocolate.8) Finish: Black.9) Finish: White Ext./Desert Sand Int.10) Finish: Desert Sand Ext./White Int.

c. Profile: Contour 23/32 inch (18mm).1) Finish: Brilliant White; Standard.2) Finish: Desert Sand.3) Finish: Chestnut Bronze.4) Finish: French Vanilla.5) Finish: Hartford Green.6) Finish: Mesa Red.7) Finish: Dark Chocolate.8) Finish: Black.9) Finish: White Ext./Desert Sand Int.10) Finish: Desert Sand Ext./White Int.11) Finish: White Ext./Chestnut Bronze Int.12) Finish: Chestnut Bronze Ext./White Int.13) Finish: White Ext./Black Int.14) Finish: Black Ext./White Int.15) Finish: White Ext./French Vanilla Int.16) Finish: French Vanilla Ext./White Int.17) Finish: White Ext./Hartford Green Int.18) Finish: Hartford Green Ext./White Int.19) Finish: White Ext./Mesa Red Int.20) Finish: Mesa Red Ext./White Int.21) Finish: White Ext./Dark Chocolate Int.22) Finish: Dark Chocolate Ext./White Int.

d. Profile: Contour 1 inch (25 mm).1) Finish: Brilliant White; Standard.2) Finish: Desert Sand.3) Finish: Chestnut Bronze.4) Finish: French Vanilla.5) Finish: Hartford Green.6) Finish: Mesa Red.7) Finish: Dark Chocolate.8) Finish: Black.9) Finish: White Ext./Desert Sand Int.10) Finish: Desert Sand Ext./White Int.

9. Type: Combination SDL: Traditional Sash Options.a. As specified by Architect.

2.4 ALUMINUM CLAD WOOD PATIO DOOR ASSEMBLIES

A. Basis of Design: Aluminum-clad wood patio door assemblies as manufactured by JELD-WEN, Inc.1. Patio Door Type: Sliding patio doors.2. Patio Door Type: Swinging patio doors.

B. Patio Door Fabrication:1. Sliding Patio Doors.

a. Frame: Finger jointed wood construction. Corner joints reinforced with injection molded nylon corner key mechanically fastened and sealed with silicone; Standard.

b. Frame: Clear wood construction. Corner joints reinforced with injection molded nylon corner keys and mechanically fastened and sealed with silicone.

08557-12

c. Panels: Corners machine clamped, joined with finger-joint-pur corners.d. Glass: Mounted using silicone glazing compound on exterior and retainer held

bead on interior.e. Cladding: 0.019 inch (0.8 mm) roll form, aluminum corners are jointed and

sealed.2. Swinging Patio Doors:

a. Frame: Finger jointed wood construction; Standard.b. Frame: Clear wood construction.c. Panels: Corners machine clamped.d. Glass: Mounted using silicone glazing compound on exterior and retainer held

bead on interior.e. Cladding: Aluminum corners are jointed and sealed.

C. Frames:1. Sliding Patio Doors.

a. Material: Select kiln-dried pine AuraLast treated wood.b. Jamb Width: 4-9/16 inches (116 mm).c. Cladding 0.050 inch (1.27 mm) extruded aluminum.

2. Swinging Patio Doors:a. Material: Select kiln-dried pine AuraLast treated wood.b. Jamb Width: 4-9/16 inches (116 mm).c. Cladding 0.050 inch (1.27 mm) extruded aluminum.

D. Sliding Door Panels:1. Materials: Select kiln-dried pine AuraLast treated wood and engineered wood

substrate. Select members have a LVL core.2. Cladding: 0.055 inch to 0.100 inch (1.4 mm to 2.5 mm) extruded aluminum, finish to

match exterior finish.3. Thickness: 1-3/4 inches (44.5 mm).4. Layout: 3-11/32 inches (85 mm) stiles and rails face width.

E. Swinging Door Panels:1. Materials: Select kiln-dried pine AuraLast treated wood and engineered wood

substrate. Select members have a fingerjointed core.2. Cladding: 0.055 inch to 0.062 inch (1.39 mm to 1.6 mm) extruded aluminum, finish to

match exterior finish.3. Thickness: 1-3/4 inches (44.5 mm).4. Layout: French Door, Entry and Sidelite - 4 3/4 inch (120.7 mm) stiles and rails;

Standard.5. Layout: 2-Panel Center Hinged - 4 3/4 inch (120.7 mm) stiles at jambs, 2 1/4 inch

(57.2 mm) stiles at mull post, 4 3/4 top and bottom rails.

F. Exterior Trim:1. Sliding Patio Door

a. Nail Fin: Nail Fin; Standard.b. Nail Fin: No Drip Cap/No Nail Fin.c. Casing: 1-5/8 inches (41 mm) brickmould; Standard.d. Casing: 3-1/2 inches (88.9 mm) Flat Casing,e. Casing: Adams Casing.f. Frame Expanders: 1-7/8 inches (48 mm).g. Frame Expanders: 3-1/4 inches (83mm).h. Mull Expanders: 2-1/8 inches (54 mm).

2. Swinging Patio Doora. Nail Fin: Nail Fin; Standard.b. Nail Fin: No Drip Cap/Nail Fin.c. Nail Fin: Drip Cap & Nail Fin Loose.

08557-13

d. Casing: None.

G. Extension Jambs:1. Sliding Patio Doors

a. Applied at head and sides of frame interior in wall depths up to 12 inches.2. Swinging Patio Doors

a. Applied at head and sides of frame interior in wall depths up to 12 inches.

H. Weatherstripping:1. Sliding Patio Doors:

a. Head: Ivory colored rigid vinyl parting stop with pile weatherstripping and aluminum track at operating head.

b. Meeting Stiles: Ivory colored fiberglass interlock sealed with dense pile weatherstripping.

c. Side Jambs: Ivory colored rigid vinyl parting stop with pile weatherstripping.d. Sill: Pile weatherstripping.

2. Swinging Patio Doors:a. Head: Foam filled leaf weatherstrip in jamb.b. Mull Jamb: Double leaf weatherstrip.c. Stationary Panel Jambs: Foam filled leaf.d. Active Panel: High Performance leaf/bulb weatherstrip.e. Sill: Sweep with flexible wand weatherstrip at bottom of panels.

I. Hardware:1. Sliding Patio Doors

a. Sliding System: Two sets of adjustable steel single steel ball bearing rollers.b. Locks: Dual Point.c. Handle Set: Harleston Traditional.

1) Handle Set Finish: As selected by Architect.2) Handle Set Finish: White.3) Handle Set Finish: Chestnut Bronze.4) Handle Set Finish: Polished Brass.5) Handle Set Finish: Antique Brass.6) Handle Set Finish: Satin Nickel.7) Handle Set Finish: Oil-Rubbed Bronze.8) Handle Set Finish: Brushed Brass.9) Handle Set Finish: Matte Black.10) Key Option: No Key; Standard.11) Key Option: Keyed.12) Key Option: Keyed Alike.13) Strike Plate Finish: Anodized Aluminum.

d. Handle Set: Whitby Contemporary.1) Handle Set Finish: As selected by Architect.2) Handle Set Finish: White.3) Handle Set Finish: Chestnut Bronze.4) Handle Set Finish: Polished Brass.5) Handle Set Finish: Antique Brass.6) Handle Set Finish: Satin Nickel.7) Handle Set Finish: Oil-Rubbed Bronze.8) Handle Set Finish: Brushed Brass.9) Handle Set Finish: Matte Black.10) Key Option: No Key; Standard.11) Key Option: Keyed.12) Key Option: Keyed Alike.13) Strike Plate Finish: Anodized Aluminum.

e. Handle Set: Belmar Traditional.

08557-14

1) Handle Set Finish: As selected by Architect.2) Handle Set Finish: White.3) Handle Set Finish: Chestnut Bronze.4) Handle Set Finish: Polished Brass.5) Handle Set Finish: Antique Brass.6) Handle Set Finish: Satin Nickel.7) Handle Set Finish: Oil-Rubbed Bronze.8) Handle Set Finish: Brushed Brass.9) Handle Set Finish: Matte Black.10) Key Option: No Key; Standard.11) Key Option: Keyed.12) Key Option: Keyed Alike.13) Strike Plate Finish: Anodized Aluminum.

f. Handle Set: Olympus Handle.1) Handle Set Finish: As selected by Architect.2) Handle Set Finish: Powdered White; Standard.3) Handle Set Finish: Polished Brass.4) Handle Set Finish: Brushed Chrome.5) Handle Set Finish: Oil-Rubbed Bronze.6) Handle Set Finish: Black Powder Coat Black.7) Handle Set Finish: PVD Satin Nickel.8) Key Option: No Key; Standard.9) Key Option: Keyed.10) Key Option: Keyed Alike.11) Strike Plate Finish: Anodized Aluminum.

g. Handle Set: Legacy Handle1) Handle Set Finish: As selected by Architect.2) Handle Set Finish: Oil-Rubbed Bronze; Standard.3) Handle Set Finish: Satin Nickel.4) Key Option: No Key; Standard.5) Key Option: Keyed.6) Key Option: Keyed Alike.7) Strike Plate Finish: Anodized Aluminum.8) Strike Plate Finish: No Strike Plate.

h. Handle Set: None.i. Sill Finish: Black.

2. Swinging Patio Doorsa. Locks: Standard, single point mortise with lever handle with lever handle and

thumb turn dead bolt.b. Hinges: Non-Adjustable; Standard.

1) Hinge Finish: As selected by Architect.2) Hinge Finish: Polished Brass; Standard.3) Hinge Finish: Antique Brass.

c. Hinges: Adjustable1) Hinge Finish: As selected by Architect.2) Hinge Finish: Polished Brass; Standard.3) Hinge Finish: Antique Brass.4) Hinge Finish: Satin Nickel.5) Hinge Finish: Bronze.6) Hinge Finish: Painted Silver.

d. Handle Set: Lido.1) Handle Set Finish: Brass; Standard.2) Handle Set Finish: Antique Brass.

e. Sill: Grey Anodized Aluminum Sill; Standard.f. Sill: Bronze Sill.

08557-15

J. Glazing for Patio Doors:1. Sliding Patio Doors:

a. Strength: Tempered glass; meets CA Urban Fire Code.b. Glazing Type: Insulated glass.

1) Description: Two panes of glass utilizing continuous roll formed stainless steel spacer and dual seal sealants.

2) Overall Nominal Thickness: 3/4 inch (19 mm).3) Glass Coating: As selected by Architect.4) Glass Coating: Low-E 366; Standard.5) Glass Coating: Low-E.6) Glass Coating: Low-E 180.7) Glass Coating: Low-E EC.8) Glass Coating: Low-E EC 366; i89 In/366 Out.9) Glass Protection: No Preserve; Standard.10) Glass Protection: Preserve.11) Air Space: Argon-filled airspace; Standard.12) Air Space: High Altitude; above 4000 foot elevation.

c. Glazing Type: Blinds Between the Glass.1) Description: White Internal Blinds; tilt and raise.2) Glass Coating: None.3) Glass Protection: None.4) Air Space: None; Standard.5) Air Space: High Altitude; above 4000 foot elevation.

2. Swinging Patio Doors:a. Strength: Tempered glass.b. Glazing Type: Insulated glass.

1) Description: Two panes of glass utilizing continuous roll formed stainless steel spacer and dual seal sealants.

2) Overall Nominal Thickness: 3/4 inch (19 mm).3) Glass Coating: As selected by Architect.4) Glass Coating: Low-E 366 Tempered; Standard.5) Glass Coating: Low-E Tempered.6) Glass Coating: Low-E EC Tempered.7) Glass Coating: Low-E 366 EC Tempered.8) Glass Protection: Plastic preserve film on interior and exterior of glass.

c. Air Space: Argon; Standard.d. Air Space: High Altitude; above 4000 foot elevation.

K. Exterior Sliding Insect Screens:1. Screen Type: Bottom Rolling Extruded Screen.

a. Material: Charcoal fiberglass mesh screen cloth (18 by 16 mesh) set in extruded aluminum frame with adjustable steel rollers.

b. Frame Color: Brilliant White; Standard.c. Frame Color: Desert Sand.d. Frame Color: Chestnut Bronze.e. Frame Color: French Vanilla.f. Frame Color: Hartford Green.g. Frame Color: Mesa Red.h. Frame Color: Black.i. Frame Color: Dark Chocolate.

2. Screen Type: Heavy Duty Top Hanging Screen.a. Material: Charcoal fiberglass mesh screen cloth (18 by 16 mesh) set in

extruded aluminum frame with adjustable steel rollers.b. Frame Color: Brilliant White; Standard.c. Frame Color: Desert Sand.d. Frame Color: Chestnut Bronze.

08557-16

e. Frame Color: French Vanilla.f. Frame Color: Hartford Green.g. Frame Color: Mesa Red.h. Frame Color: Black.i. Frame Color: Dark Chocolate.

3. Screen Type: Heavy Duty Bottom Rolling Extruded.a. Material: Charcoal fiberglass mesh screen cloth (18 by 16 mesh) set in

extruded aluminum frame with adjustable steel rollers.b. Frame Color: Brilliant White; Standard.c. Frame Color: Desert Sand.d. Frame Color: Chestnut Bronze.e. Frame Color: French Vanilla.f. Frame Color: Hartford Green.g. Frame Color: Mesa Red.h. Frame Color: Black.i. Frame Color: Dark Chocolate.

L. Swinging Screens:1. Material: Fiberglass, screen cloth (18 by 16 mesh) set in extruded aluminum frame.

a. Frame Color: As selected by Architect.b. Frame Color: White; Standard.c. Frame Color: Chestnut Bronze.d. Frame Color: French Vanilla.e. Frame Color: Hartford Green.f. Frame Color: Mesa Red.

2. Material: Aluminum Silver screen cloth (18 by 16 mesh) set in extruded aluminum frame.a. Frame Color: As selected by Architect.b. Frame Color: White; Standard.c. Frame Color: Chestnut Bronze.d. Frame Color: French Vanilla.e. Frame Color: Hartford Green.f. Frame Color: Mesa Red.

3. Material: Aluminum Charcoal screen cloth (18 by 16 mesh) set in extruded aluminum frame.a. Frame Color: As selected by Architect.b. Frame Color: White; Standard.c. Frame Color: Chestnut Bronze.d. Frame Color: French Vanilla.e. Frame Color: Hartford Green.f. Frame Color: Mesa Red.

M. Grilles:1. Sliding Patio Doors

a. Simulated Divided Lites (SDL) with Perm. Wood:1) Exterior Muntins:

a) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit.

b) Profile: Beaded:1) Width: 7/8 inch (22 mm).2) Width: 1-1/8 inch (28.5 mm).3) Width: 1-3/8 inch (34.9 mm).4) Width: 2-5/16 inch (59 mm).

c) Profile: Putty:1) Width: 7/8 inch (22 mm).2) Width: 1-1/8 inch (28.5 mm).

08557-17

3) Width: 5/8 inch (15.9 mm).d) Finish: As selected by Architect.e) Finish: Brilliant White; Standard.f) Finish: Desert Sand.g) Finish: Chestnut Bronze.h) Finish: French Vanilla.i) Finish: Hartford Green.j) Finish: Mesa Red.k) Finish: Black.l) Finish: Dark Chocolate.

2) Interior Shadow Bars:a) Finish: Silver; Standard.b) Finish: Light Brown.c) Finish: No Shadow Bar.

3) Interior Muntins:a) Material: Clear pine permanently bonded to the interior of the

insulating glass unit.b) Profile: Traditional Bead profile.c) Profile: Putty profile.d) Width: Match exterior muntin.e) Finish: Match interior finish.

b. Full Surround Grilles:1) Material: Unfinished clear pine.2) Pattern: Modified OGEE.3) Width: 7/8 inch (22 mm).

c. Grilles Between the Glass (GBG):1) Material: Made of roll formed aluminum suspended within the air cavity.2) Profile: Flat 5/8 inch (16mm).

a) Finish: Brilliant White; Standard.b) Finish: Desert Sand.c) Finish: Chestnut Bronze.d) Finish: French Vanilla.e) Finish: Hartford Green.f) Finish: Mesa Red.g) Finish: Dark Chocolate.h) Finish: Black.i) Finish: White Ext./Desert Sand Int.j) Finish: Desert Sand Ext./White Int.

3) Profile: Contour 23/32 inch (18mm).a) Finish: Brilliant White; Standard.b) Finish: Desert Sand.c) Finish: Chestnut Bronze.d) Finish: French Vanilla.e) Finish: Hartford Green.f) Finish: Mesa Red.g) Finish: Dark Chocolate.h) Finish: Black.i) Finish: White Ext./Desert Sand Int.j) Finish: Desert Sand Ext./White Int.k) Finish: White Ext./Chestnut Bronze Int.l) Finish: Chestnut Bronze Ext./White Int.m) Finish: White Ext./Black Int.n) Finish: Black Ext./White Int.o) Finish: White Ext./French Vanilla Int.p) Finish: French Vanilla Ext./White Int.q) Finish: White Ext./Hartford Green Int.

08557-18

r) Finish: Hartford Green Ext./White Int.s) Finish: White Ext./Mesa Red Int.t) Finish: Mesa Red Ext./White Int.u) Finish: White Ext./Dark Chocolate Int.v) Finish: Dark Chocolate Ext./White Int.

2. Swinging Patio Doors:a. Simulated Divided Lites (SDL) with Perm. Wood:

1) Exterior Muntins:a) Material: Extruded aluminum permanently applied to the exterior of

the insulating glass unit.b) Profile: Beaded:

1) Width: 7/8 inch (22 mm).2) Width: 1-1/8 inch (28.5 mm).3) Width: 1-3/8 inch (34.9 mm).

c) Profile: Putty:1) Width: 7/8 inch (22 mm).2) Width: 1-1/8 inch (28.5 mm).

d) Finish: As selected by Architect.e) Finish: Brilliant White; Standard.f) Finish: Chestnut Bronze.g) Finish: Desert Sand.h) Finish: French Vanilla.i) Finish: Hartford Green.j) Finish: Mesa Red.k) Interior Shadow Bars:

1) Finish: Silver Shadow; Standard.2) Finish: Light Brown.

l) Interior Muntins:1) Material: Clear pine permanently bonded to the interior of

the insulating glass unit.2) Profile: Match exterior profile.3) Width: Match exterior muntin.4) Finish: Match interior finish.

b. Simulated Divided Lites (SDL) with Full Surround Wood:1) Exterior Muntins:

a) Material: Extruded aluminum permanently applied to the exterior of the insulating glass unit.

b) Profile: Bead stop profiles:1) Width: 7/8 inch (22 mm).2) Width: 1-1/8 inch (28.5 mm).3) Width: 1-3/8 inch (34.9 mm).

c) Finish: As selected by Architect.d) Finish: Brilliant White; Standard.e) Finish: Chestnut Bronze.f) Finish: Desert Sand.g) Finish: French Vanilla.h) Finish: Hartford Green.i) Finish: Mesa Red.j) Interior Muntins:

1) Material: Clear pine permanently bonded to the interior of the insulating glass unit.

2) Profile: Modified OGEE.3) Width: Match exterior muntin.4) Finish: Match interior finish.

c. Full Surround Grilles:1) Material: Unfinished clear pine.

08557-19

2) Pattern: Modified OGEE.3) Width: 7/8 inch (22 mm).4) Width: 1-1/8 inch (28.5 mm).5) Width: 1-3/8 inch (34.9 mm).

d. Grilles Between the Glass (GBG):1) Material: Made of roll formed aluminum suspended within the air cavity.2) Profile: Flat 5/8 inch (16 mm).

a) Finish: As selected by Architect.b) Finish: Brilliant White; Standard.c) Finish: Chestnut Bronze.d) Finish: Desert Sand.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Black.i) Finish: Arctic Silver.j) Finish: Dark Chocolate.k) Finish: White Ext./Desert Sand Int.l) Finish: Desert Sand Ext./White Int.

3) Profile: Contour 23/32 inch (18mm).a) Finish: As selected by Architect.b) Finish: Brilliant White; Standard.c) Finish: Chestnut Bronze.d) Finish: Desert Sand.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Black.i) Finish: Arctic Silver.j) Finish: Dark Chocolate.k) Finish: White Ext./Desert Sand Int.l) Finish: Desert Sand Ext./White Int.m) Finish: White Ext./Chestnut Bronze Int.n) Finish: Chestnut Bronze Ext./White Int.o) Finish: French Vanilla Ext./White Int.p) Finish: White Ext./Hartford Green Int.q) Finish: Hartford Green Ext./White Int.r) Finish: White Ext./Mesa Red Int.s) Finish: Mesa Red Ext./White Int.t) Finish: White Ext./Arctic Silver Int.u) Finish: White Ext./Dark Chocolate Int.

4) Profile: Contour 1 inch (25.4 mm).a) Finish: As selected by Architect.b) Finish: Brilliant White; Standard.c) Finish: Chestnut Bronze.d) Finish: Desert Sand.e) Finish: French Vanilla.f) Finish: Hartford Green.g) Finish: Mesa Red.h) Finish: Black.i) Finish: Arctic Silver.j) Finish: Dark Chocolate.k) Finish: White Ext./Desert Sand Int.l) Finish: Desert Sand Ext./White Int.

PART 3 EXECUTION

08557-20

3.1 EXAMINATION AND PREPARATION

A. Inspect and prepare openings and substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions.1. Inspect assembly components prior to installation.2. Verify rough opening conditions are within recommended tolerances.3. Form sheet metal sill pan in accordance with manufacturer's recommendations.4. Prepare assembly components for installation in accordance with manufacturer's

recommendations.

B. Do not proceed with installation until openings and substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.

C. If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.

3.2 INSTALLATION

A. Install windows in accordance with manufacturer's installation guidelines and recommendations Comply with manufacturer's published instructions for installation type. Install in proper relationship with adjacent work.

B. Installation of Windows with Nailing Fins:1. Shim side jambs straight.2. Inspect window for square, level and plumb.3. Fasten window through nailing fins around entire window.4. Test and adjust for smooth operation of window.5. Set all nails below wood surface.

C. Installation of Patio Doors with Nailing Fins:1. Shim side jambs straight.2. Inspect door for square, level and plumb.3. Fasten door through nailing fins around entire door.4. Test and adjust for smooth operation of patio door.

3.3 FIELD QUALITY CONTROL

A. Manufacturers' Field Services: Perform field inspections as recommended by manufacturer.

3.4 CLEANING

A. Clean the exterior surface and glass with mild soap and water.

B. Remove and dispose of protective film from glass; touch-up, repair or replace damaged components and assemblies before Substantial Completion.

3.5 PROTECTION

A. Protect installed windows from damage.

END OF SECTION

08557-21