ARCAT | Free Building Product CAD Details, BIM, Specs ... · Web viewSections: Composite overlays adhered to base door constructed of steel frame and skin construction with 1-5/8

SECTION 08 36 13RESIDENTIAL SECTIONAL DOORS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2013 - 2020 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Residential sectional doors of the following types:1. Full view aluminum doors. (Avante Collection)2. Steel sectional doors. (Classic Collection Premium Series)3. Steel sectional doors. (Classic Collection Value Plus Series)4. Steel sectional doors, non-insulated. (Classic Collection Value Series)5. Sectional doors. (Coachman Collection)6. Steel sectional doors. (Gallery Collection)7. Sectional doors. (Grand Harbor Collection)8. Sectional doors. (Canyon Ridge Collection)9. Steel sectional doors. (Modern Steel Collection)

1.2 RELATED SECTIONS

A. Section 05 50 00 - Metal Fabrications.

B. Section 06 10 00 - Rough Carpentry.

C. Section 08 71 53 - Security Door Hardware.

D. Section 11 12 26.13 - Parking Fee Coin Collection Equipment.

E. Division 16 - Electrical - Electrical service and connections for powered operators.

1.3 REFERENCES

A. ASTM International (ASTM):1. ASTM A 653 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or

Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.2. ASTM A 924 - Standard Specification for General Requirements for Steel Sheet,

Metallic-Coated by the Hot-Dip Process.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets and detail drawings for each product to be used, including:

08 36 13 -1

1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation details and methods.4. Operation and maintenance data.5. Nameplate data and ratings for motors.

C. Shop Drawings: Include opening dimensions and required tolerances, connection details, anchorage spacing, hardware locations, and installation details.

D. Selection Samples: Submit two complete sets of color chips representing manufacturer's full range of available colors and patterns.

E. Verification Samples: For each finish product specified, submit samples that represent actual product, color, and sheen.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications: Company specializing in manufacturing the types of doors specified in this section, with not less than ten years of documented experience.

B. Installer Qualifications: Company specializing in installing the types of products specified in this section, with minimum of two years of documented experience, and approved by the door manufacturer.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.

B. Store products indoors in manufacturer's or fabricator's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.

1.7 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install systems under environmental conditions outside manufacturer's recommended limits.

1.8 WARRANTY

A. Finish Warranty:1. Warranty period: 5 years against cracking, checking and peeling. - All Residential

Doors.2. Warranty period: 15 years against rust through. - All Value Residential Doors.3. Warranty period: 25 years against rust through. - All Value Plus Residential Doors.4. Warranty period: Lifetime against rust through. - All Premium Residential Doors.

B. Delamination Warranty: Provide manufacturer's standard warranty against delamination.1. Warranty period: 5 years.

C. Hardware and Springs Warranty: Provide manufacturer's standard warranty against defects in materials or workmanship.1. Warranty period: 3 years.

D. Warranty for Optional Windows: Provide manufacturer's standard warranty1. Warranty period: 10 years against manufacturing defects and excessive discoloration

of the optional windows.2. Warranty period: 3 years against defects in materials and workmanship of the optional

08 36 13 -2

windows.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Clopay Corporation, which is located at: 8585 Duke Blvd.; Mason, OH 45040; Toll Free Tel: 800-526-4301; Tel: 513-770-4800; Fax: 888-434-3193; Email:request info ([email protected]); Web:https://www.clopaydoor.com|https://www.clopaydoor.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 SECTIONAL OVERHEAD DOORS - GENERAL

A. Wind Performance Requirements: As requested, design doors to withstand positive and negative wind loads as calculated in accordance with applicable building code. Doors tested to 1.5 times design wind load, according to ASTM E330.1. Design Wind Load: ________lb/sf (_____kPa).

B. Counterbalance Type: Torsion spring counterbalance.1. Torsion spring counterbalance mechanism sized to weight of the door, with helically

wound, coated oil tempered or galvanized torsion spring mounted on a steel shaft; cable drum of die cast aluminum with high strength galvanized aircraft cable with minimum 7 to 1 safety factor.

2. Spring Type: Standard Cycle Spring, 10,000 cycle.3. Spring Type: Provide optional High Cycle Spring, 20,000 cycle.

C. Counterbalance Type: Extension spring counterbalance.1. Extension spring counterbalance mechanism sized to weight of the door, with a black

painted extension spring; cable sheaves of galvanized steel with high strength galvanized aircraft cable with minimum 7 to 1 safety factor. Standard high strength galvanized aircraft cable to contain spring in the event of spring failure; minimum 7 to 1 safety factor.

2. Standard Cycle Spring: 10,000 cycle.

2.3 FULL VIEW ALUMINUM DOORS

A. Full View Aluminum Doors: Clopay Avante Collections as manufactured by Clopay Corporation.1. Model AV - w/ 1/8 inch (3 mm) tempered glass.2. Model AVI- w/ Heavy Glazing (insulated or 1/4 inch (6 mm) tempered).3. Door Construction: 2.125 inch (54 mm) thick doors.

a. Panel Sections: 2-1/8 inches (54 mm) thick extruded 6053-T5 aluminum, with integral reinforcing fin.

b. Enclosed Top and Bottom Rails: 3-1/2 inches (89 mm) wide, meeting rails 2-13/16 inch (71.4 mm) wide, and end stiles 3-1/2 inches (89 mm) wide, with meeting rails meeting to form a tongue-and-groove joint and bottom rail configured to retain U-shaped flexible PVC astragal.

c. Glazing and Solid Panels: Installed and sealed with hot melt sealant, locking retainer.

4. Maximum Door Size AV: 20 ft 0 in (6.1 m) wide by 16 ft (4.9 m) high.5. Maximum Door Size AVI: 16 ft 2 in (5.0 m) wide by 16 ft (4.9 m) high.6. Windows: None, doors come standard with no windows.

08 36 13 -3

7. Windows: Provide Full-view aluminum sections, pre-painted to match door.a. Glazing: 1/8 inch (3 mm) clear tempered DSB glass.b. Glazing: 1/8 inch (3 mm) gray tinted tempered DSB glass.c. Glazing: 1/8 inch (3 mm) bronze tinted tempered DSB glass.d. Glazing: 1/8 inch (3 mm) obscure tempered DSB glass.e. Glazing: 1/8 inch (3 mm) frosted tempered DSB glass.f. Glazing: 1/8 inch (3 mm) frosted acrylic, special order.g. Glazing: 1/8 inch (3 mm) clear acrylic.h. Glazing: 1/8 inch (3 mm) gray acrylic, special order.i. Glazing: 1/8 inch (3 mm) white acrylic, special order.j. Glazing: 1/4 inch (6 mm) mirrored DSB glass, special order.k. Glazing: 1/4 inch (6 mm) white laminate DSB glass, special order.l. Glazing: 1/4 inch (6 mm) clear Polygal.m. Glazing: 1/4 inch (6 mm) bronze tinted Polygal, special order.n. Glazing: 1/2 inch (12 mm) clear tempered insulated DSB glass.o. Glazing: 1/2 inch (12 mm) obscure tempered insulated DSB glass.p. Glazing: 1/2 inch (12 mm) frosted tempered insulated DSB glass.q. Glazing: 1/2 inch (12 mm) low-e tempered insulated DSB glass.r. Glazing: Custom specialty glass ___.s. Glazing: None, no glazing, 0.050 inch (1.27 mm) aluminum panel.

1) Panel Finish: Clear anodizing.2) Panel Finish: Black anodizing.3) Panel Finish: Bronze anodizing.4) Panel Finish: Standard White.5) Panel Finish: Dark Bronze anodizing6) Panel Finish: Chocolate painted.7) Panel Finish: Bronze painted8) Panel Finish: Ultra-Grain Cherry Light Finish simulated woodgrain paint

finish.9) Panel Finish: Ultra-Grain Cherry Dark Finish simulated woodgrain paint

finish.10) Panel Finish: Custom Color RAL Powder Coat _____________.11) Panel Finish: Clopay Color Blast Finish ________.

8. Aluminum Finish: Standard White painted.9. Aluminum Finish: Bronze painted.10. Aluminum Finish: Chocolate brown painted.11. Aluminum Finish: Clear Aluminum anodized.12. Aluminum Finish: Black anodized.13. Aluminum Finish: Bronze anodized.14. Aluminum Finish: Dark Bronze anodized.15. Aluminum Finish: Ultra-Grain Cherry Light Finish simulated woodgrain paint finish.16. Aluminum Finish: Ultra-Grain Cherry Dark Finish simulated woodgrain paint finish.17. Aluminum Finish: Custom Color RAL Powder Coat ______.18. Aluminum Finish: Clopay Color Blast Finish _____.19. Locking: 1 inside spring loaded slide bolt lock on end stile that engages slot in track.20. Locking: 2 inside spring loaded slide bolt locks on end stile that engage slots in track.21. Weatherstripping: Standard, provide U shaped bottom seal.22. Perimeter Seals: _____.23. Tracks: Vertical tracks minimum 0.061 inch (1.55 mm) galvanized steel tapered and

mounted for wedge type closing. Horizontal tracks minimum 0.075 inch (1.91 mm) galvanized steel, reinforced with minimum 0.0897 inch (2.28 mm) galvanized steel angles as required.a. Track Width: 2 inches (50 mm).b. Provide standard lift tracks with 15 inches (381 mm) radius track as indicated.c. Provide vertical lift tracks as indicated.d. Provide high lift tracks as indicated.

08 36 13 -4

e. Provide tracks that follow roof slope tracks as indicated.f. Provide low headroom tracks as indicated.

2.4 RESIDENTIAL STEEL SECTIONAL DOORS - Premium (3-layer) Doors

A. Residential Steel Sectional Doors: Classic Collection Premium Series as manufactured by Clopay Corporation.1. Expanded Polystyrene (EPS) Insulated 1-3/8" (35 mm) thick product :

a. Short Panel Model: Clopay Model 4050.b. Long Panel Model: Clopay Model 4053.

2. Expanded Polystyrene (EPS) Insulated 2 inches (51 mm) thick product:a. Short Panel Model: Clopay Model 4300.b. Long Panel Model: Clopay Model 4310.

3. Thermally-Broken, Intellicore Polyurethane insulated 1-3/8" (35 mm) thick product:a. Short Panel Model: Clopay Model 9130.b. Long Panel Model: Clopay Model 9133.

4. Thermally-Broken, Intellicore Polyurethane insulated 2 inches (51 mm) thick product:a. Short Panel Model: Clopay Model 9200.b. Long Panel Model: Clopay Model 9203.

5. Door Construction:a. Sections (EPS): Pressure bonded expanded polystyrene (EPS) core

construction between exterior and interior steel skins.b. Sections (Intellicore): Foamed in place Intellicore Polyurethane core

construction between exterior and interior steel skins.c. Exterior Steel Skins (Short Elegant Panel): Formed from Short Elegant Panel

embossed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Exterior Steel Skins (Long Elegant Panel): Formed from flush Long Elegant Panel embossed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

e. Interior Steel Skins: Formed from roll formed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

f. 1 -3/8" EPS Section Joints: Sections formed to create tongue-in-groove meeting joint.

g. Other Section Joints: Sections formed to create tongue-in-groove meeting joint with thermal break.

h. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy hinge attachment.

i. Reinforcing: Galvanized and primed steel reinforcement located under each hinge location, pre-punched for hinge attachment.

j. Connections: Stiles fastened to steel skins using Tog-L-Loc system.k. Handles: 2 High impact polymer step plate/lift handles to comply with DASMA

116 and be color-matched to the door sections.6. Maximum Door Size 1-3/8 inch Thick Product: 18 ft 2 in (5.5 m) wide by 16 ft (4.9 m)

high.7. Maximum Door Size 2 inches Thick Product: 20 ft 2 in (6.1 m) wide by 16 ft (4.9 m)

high.8. Overall Panel Thickness listed in description9. Steel Skin Thickness:

a. Exterior: Minimum 27 gauge 0.016 inch (0.40 mm).b. Exterior: Minimum 24 gauge 0.022 inch (0.55 mm).c. Interior: Minimum 29 gauge 0.012 inch (0.30 mm). - Intellicore Doorsd. Interior: Minimum 27 gauge 0.015 inch (0.38 mm). - EPS Doors

08 36 13 -5

10. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment through pre-punched holes. Minimum 20 gauge, 0.034 inch (0.86 mm) thick.

11. Bottom Section: Reinforced with continuous 0.040 inch (1.016 mm) aluminum astragal retainer with U-shaped flexible PVC astragal.

12. Thermal Resistance: Calculated in accordance with DASMA TDS-163.a. EPS 1-3/8 inch (35 mm) Thick - R-Value: 6.5 (deg F hr sq ft/Btu.)b. EPS 2 inch (51 mm) Thick - R-Value: 9.0 (deg F hr sq ft/Btu.)c. Intellicore 1-3/8 inch (35 mm) Thick - R-Value: 12.9 (deg F hr sq ft/Btu.)d. Intellicore 2 inch (51 mm) Thick - R-Value: 18.4 (deg F hr sq ft/Btu.)

13. Windows: None, doors come standard with no windows.14. Optional Windows: Provide optional Decorative Insert Short Panel Windows; injection

molded ASA plastic windows measuring 19-1/2 inches x 12 inches (495 mm x 305 mm).a. Glazing: 3/32 inch (2.5 mm) clear SSB glass.b. Glazing: 1/8 inch (3 mm) clear DSB glass.c. Glazing: 1/8 inch (3 mm) obscure DSB glass.d. Glazing: 1/2 inch (12 mm) insulated DSB glass.e. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.f. Glazing: 1/8 inch (3 mm) clear acrylic.g. Glazing: 1/8 inch (3 mm) Frosted glass.h. Glazing: 1/2 inch (12 mm) insulated Frosted glass.i. Glazing: 1/8 inch (3 mm) Rain glass.j. Glazing: 1/2 inch (12 mm) insulated Rain glass.k. Glazing: 1/8 inch (3 mm) Seeded glass.l. Glazing: 1/2 inch (12 mm) insulated Seeded glass.m. Decorative Snap-in Plastic Inserts: Sunset 501.n. Decorative Snap-in Plastic Inserts: Sunset 502.o. Decorative Snap-in Plastic Inserts: Sunset 503.p. Decorative Snap-in Plastic Inserts: Sunset 504.q. Decorative Snap-in Plastic Inserts: Sunset 505.r. Decorative Snap-in Plastic Inserts: Sunset 506.s. Decorative Snap-in Plastic Inserts: Charleston 508.t. Decorative Snap-in Plastic Inserts: Colonial 509.u. Decorative Snap-in Plastic Inserts: Prairie 510.

15. Windows: Provide optional Decorative Insert Series Impact Resistant Windows; woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb. impact as per the Florida Building Code) measuring 19-1/2 inches x 12 inches (495 mm x 305 mm).a. Glazing: Clear Polycarbonate.b. Decorative Snap-in Plastic Inserts: Sunset 501.c. Decorative Snap-in Plastic Inserts: Sunset 502.d. Decorative Snap-in Plastic Inserts: Sunset 503.e. Decorative Snap-in Plastic Inserts: Sunset 504.f. Decorative Snap-in Plastic Inserts: Sunset 505.g. Decorative Snap-in Plastic Inserts: Sunset 506.h. Decorative Snap-in Plastic Inserts: Charleston 508.i. Decorative Snap-in Plastic Inserts: Colonial 509.j. Decorative Snap-in Plastic Inserts: Prairie 510.

16. Windows: Provide optional Decorative Wrought Iron Series and Leaded Series Short Panel Windows; injection molded ASA plastic windows measuring 19-1/2 inches x 12 inches (495 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Short, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Short, frosted DSB glass, leaded-look.d. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.e. Glazing: 1/2 inch (12 mm) Carlisle Short, frosted insulated DSB glass, leaded-

08 36 13 -6

look.f. Glazing: 1/2 inch (12 mm) Kristin Short, frosted insulated DSB glass, leaded-

look.g. Glazing: 1/2 inch (12 mm) Roselle Short, frosted insulated DSB glass, leaded-

look.h. Glazing: 1/2 inch (12 mm) Trenton Short, frosted insulated DSB glass, leaded-

look.i. Glazing: Tuscany Short wrought iron acrylic.j. Glazing: Orleans Short wrought iron acrylic.

17. Windows: Provide optional Decorative Insert Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 3/32 inch (2.5 mm) clear SSB glass.b. Glazing: 1/8 inch (3 mm) clear DSB glass.c. Glazing: 1/8 inch (3 mm) obscure DSB glass.d. Glazing: 1/2 inch (12 mm) insulated DSB glass.e. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.f. Glazing: 1/8 inch (3 mm) clear acrylic.g. Glazing: 1/8 inch (3 mm) Frosted glass.h. Glazing: 1/2 inch (12 mm) insulated Frosted glass.i. Glazing: 1/8 inch (3 mm) Rain glass.j. Glazing: 1/2 inch (12 mm) insulated Rain glass.k. Glazing: 1/8 inch (3 mm) Seeded glass.l. Glazing: 1/2 inch (12 mm) insulated Seeded glass.m. Decorative Snap-in Plastic Inserts: Sunset 601.n. Decorative Snap-in Plastic Inserts: Sunset 603.o. Decorative Snap-in Plastic Inserts: Sunset 605.p. Decorative Snap-in Plastic Inserts: Charleston 608.q. Decorative Snap-in Plastic Inserts: Prairie 610.r. Decorative Snap-in Plastic Inserts: Madison 611.s. Decorative Snap-in Plastic Inserts: Stockton 612.t. Decorative Snap-in Plastic Inserts: Madison Arch 613.

18. Windows: Provide optional Decorative Wrought Iron Series and Leaded Series Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Long, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Long, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Long, frosted DSB glass, leaded-look.d. Glazing: 1/8 inch (3 mm) Trenton Long, frosted DSB glass, leaded-look.e. Glazing: 1/2 inch (12 mm) Carlisle Long, frosted insulated DSB glass, leaded-

look.f. Glazing: 1/2 inch (12 mm) Kristin Long, frosted insulated DSB glass, leaded-

look.g. Glazing: 1/2 inch (12 mm) Roselle Long, frosted insulated DSB glass, leaded-

look.h. Glazing: 1/2 inch (12 mm) Trenton Long, frosted insulated DSB glass, leaded-

look.i. Glazing: Tuscany Long wrought iron acrylic.j. Glazing: Orleans Long wrought iron acrylic.

19. Windows: Provide optional Architectural Series Short Windows; extruded cellular PVC windows measuring 19-1/2 inches x 16 inches (495 mm x 406 mm).a. Grilles: Short with square grilles, SQ22.b. Grilles: Short with rectangular grilles, REC11.c. Grilles: Plain Short, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.

08 36 13 -7

g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.n. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.o. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.p. Glazing: 1/8 inch (3 mm) Clayton Short, frosted DSB glass, leaded-look.q. Glazing: 1/2 inch (12 mm) Kristin Short, frosted insulated DSB glass, leaded-

look.r. Glazing: 1/2 inch (12 mm) Trenton Short, frosted insulated DSB glass, leaded-

look.s. Glazing: 1/2 inch (12 mm) Clayton Short, frosted insulated DSB glass, leaded-

look.t. Glazing: Wrought iron Short, acrylic.

20. Windows: Provide optional Architectural Series Long Windows; extruded cellular PVC windows measuring 42 inches x 16 inches (1067 mm x 406 mm).a. Grilles: Long with square grilles, SQ24.b. Grilles: Long with rectangular grilles, REC14.c. Grilles: Plain Long, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.n. Glazing: 1/8 inch (3 mm) Kristin Long, frosted DSB glass, leaded-look.o. Glazing: 1/8 inch (3 mm) Trenton Long, frosted DSB glass, leaded-look.p. Glazing: 1/8 inch (3 mm) Clayton Long, frosted DSB glass, leaded-look.q. Glazing: 1/2 inch (12 mm) Kristin Long, frosted insulated DSB glass, leaded-

look.r. Glazing: 1/2 inch (12 mm) Trenton Long, frosted insulated DSB glass, leaded-

look.s. Glazing: 1/2 inch (12 mm) Clayton Long, frosted insulated DSB glass, leaded-

look.t. Glazing: Wrought Iron Long, acrylic.

21. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb impact as per the Florida Building Code) measuring 19-12 inches x 16 inches (495 mm x 406 mm).a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonate.e. Grilles: Long with square grilles, SQ22.f. Grilles: Plain Short, no grilles.

22. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb impact as per the Florida Building Code) measuring 42 inches x 16 inches (1067 mm x 406 mm).

08 36 13 -8

a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonatee. Grilles: Long with square grilles, SQ24.f. Grilles: Plain Long, no grilles.

23. Windows: Provide optional Architectural Series ARCH1 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches (1067 mm x 406 mm) with a 159-1/2 inches (4051 mm) radius top.a. Glazing: 1/8 inch (3 mm) clear DSB glass.b. Glazing: 1/8 inch (3 mm) obscure DSB glass.c. Glazing: 1/2 inch (12 mm) insulated DSB glass.d. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.e. Glazing: 1/8 inch (3 mm) Frosted glass.f. Glazing: 1/2 inch (12 mm) insulated Frosted glass.g. Glazing: 1/8 inch (3 mm) Rain glass.h. Glazing: 1/2 inch (12 mm) insulated Rain glass.i. Glazing: 1/8 inch (3 mm) Seeded glass.j. Glazing: 1/2 inch (12 mm) insulated Seeded glass.k. Grilles: Snap-in plastic grilles.l. Grilles: Vertical grilles.m. Grilles: Plain, no grilles.

24. Windows: Provide optional Architectural Series ARCH2 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches (1067 mm x 406 mm) with a 39-3/4 inches (1001 mm) radius top.a. Grilles: Snap-in plastic grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.n. Glazing: Wrought Iron ARCH, acrylic.

25. Interior Finish (EPS) Door- Stucco embossed texture with flush design, white interior color.

26. Interior Finish (Intellicore) Door- Stucco embossed texture with shallow U ribbed pattern.

27. Exterior Finishes:a. Finish Type: Woodgrain embossed texture, Short Elegant Panel embossments.b. Finish Type: Woodgrain embossed texture, Long Elegant Panel embossments.c. Color: Standard White.d. Color: Almond.e. Color: Desert Tan.f. Color: Sandtone.g. Color: Chocolate.h. Color: Bronze.i. Color: Hunter Green.j. Color: Gray.k. Color: Glacier White.l. Color: Mocha Brown.

08 36 13 -9

m. Color: Black.n. Color: Clopay Color Blast ____.

28. Ultra-Grain Exterior Finish:a. Finish Type: Ultra-Grain Exterior Finish Stucco embossed texture with Short

Elegant Panel embossments to simulate the look of stained wood.b. Finish Type: Ultra-Grain Exterior Finish: Stucco embossed texture with Long

Elegant Panel embossments in one of the following color options to simulate the look of stained wood.

c. Finish: Ultra-Grain Classic Medium Finish.d. Finish: Ultra-Grain Classic Cherry Finish.e. Finish: Ultra-Grain Classic Walnut Finish.

29. Locking: Standard, keyed spring-loaded lock bar.30. Locking: Provide optional keyed spring-loaded snap latches.31. Locking: Provide optional non-keyed interior slide bolt.32. Weatherstripping: Standard, Provide U shaped bottom seal.33. Perimeter Seals: _____.34. Tracks: Vertical tracks minimum 0.040 inch (1.02 mm) galvanized steel tapered and

mounted for wedge type closing. Horizontal tracks minimum 0.051 inch (1.29 mm) galvanized steel, reinforced with minimum 0.0897 inch (2.28 mm) galvanized steel angles as required.a. Track Type: Provide standard lift tracks.b. Track Type: Provide optional low headroom track.c. Track Type: Provide optional high lift track.d. Track Type: Provide optional follow-the-roof track.e. Track Width: 2 inches (50 mm).f. Track Radius: 10 inch (254 mm).g. Track Radius: 12 inch (305 mm).h. Track Radius: 15 inch (381 mm).i. Track Radius: 20 inch (508 mm).j. Track Radius: 32 inch (813 mm).

2.5 RESIDENTIAL STEEL SECTIONAL DOORS - Value Plus (2-layer) Doors

A. Residential Steel Sectional Doors: Classic Collection Value Plus Series as manufactured by Clopay Corporation.1. Clopay Model 1500: 25 Ga. Ship-Lap Joint Short Panel, 1-5/16 insulated Model:2. Clopay Model 76V: 25 Ga. Ship-Lap Joint Long Panel 1-5/16 insulated Model3. Clopay Model T41S: 24 Ga. Tongue and Groove Joint Short Panel 7/8" insulated

Model:4. Clopay Model T41L: 24 Ga. Tongue and Groove Joint Long Panel 7/8" insulated

Model5. Clopay Model T42S: 24 Ga. Tongue and Groove Joint Short Panel 1-5/16" insulated

Model6. Clopay Model T42L: 24 Ga. Tongue and Groove Joint Long Panel 1-5/16" insulated

Model:7. Clopay Model T51S: 25 Ga. Tongue and Groove Joint Short Panel 7/8" insulated

Model:8. Clopay Model T51L: 25 Ga. Tongue and Groove Joint Long Panel 7/8" insulated

Model9. Clopay Model T52S: 25 Ga. Tongue and Groove Joint Short Panel 1-5/16" insulated

Model10. Clopay Model T52L: 25 Ga. Tongue and Groove Joint Long Panel 1-5/16" insulated

Model11. Insulation: Polystyrene Insulated.12. Door Construction:

a. Sections: Steel frame and skin construction with 1-5/16 inch (33 mm) thick

08 36 13 -10

polystyrene insulation with vinyl backer.b. Sections: Steel frame and skin construction with bonded 7/8 inch (22 mm) thick

polystyrene insulation with vinyl backer.c. Steel Skins: Formed from Short Traditional Panel embossed commercial or

drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Steel Skins: Formed from Long Traditional Panel embossed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

e. Section Joints: Sections formed to create shiplap meeting joint.f. Section Joints: Sections formed to create tongue and groove meeting joint.g. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy

hinge attachment.h. Connections: Stiles fastened to steel skins using Tog-L-Loc system.i. Handles: 2 high impact polymer step plate/lift handles to comply with DASMA

116 and be color-matched to the door sections.13. 24 Ga Models Maximum Door Size: 18 ft (5.5 m) wide by 16 ft (4.9 m) high.514. 25 Ga Models Maximum Door Size: 20 ft (6.1 m) wide by 16 ft (4.9 m) high.15. Overall Panel Thickness: 2.125 inches (54 mm).16. Overall Panel Thickness: 2 inches (51 mm).17. Steel Skin Thickness: Minimum 25 gauge 0.019 inch (0.48 mm)18. Steel Skin Thickness: Minimum 24 gauge 0.022 inch (0.56 mm)19. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment

through pre-punched holes. Minimum 18 gauge, 0.049 inch (1.25 mm) thick.20. Bottom Section: Reinforced with continuous 0.040 inch (1.016 mm) aluminum astragal

retainer with bulb-shaped flexible PVC astragal.21. Bottom Section: Reinforced with continuous 0.040 inch (1.016 mm) aluminum astragal

retainer with U-shaped flexible PVC astragal.22. Thermal Resistance: Calculated in accordance with DASMA TDS-163

a. R-Value: 6.3 deg F hr sq ft/Btu.b. R-Value: 4.4 deg F hr sq ft/Btu.

23. Windows: None, doors come standard with no windows.24. Windows: Provide optional Decorative Insert Series Short Panel Windows; injection

molded ASA plastic windows measuring 19-1/2 inches x 12 inches (495 mm x 305 mm).a. Glazing: 3/32 inch (2.5 mm) clear SSB glass.b. Glazing: 1/8 inch (3 mm) clear DSB glass.c. Glazing: 1/8 inch (3 mm) obscure DSB glass.d. Glazing: 1/8 inch (3 mm) Clear acrylic.e. Glazing: 1/8 inch (3 mm) Frosted glass.f. Glazing: 1/8 inch (3 mm) Rain glass.g. Glazing: 1/8 inch (3 mm) Seeded glass.h. Decorative Snap-in Plastic Inserts: Sunset 501.i. Decorative Snap-in Plastic Inserts: Sunset 502.j. Decorative Snap-in Plastic Inserts: Sunset 503.k. Decorative Snap-in Plastic Inserts: Sunset 504.l. Decorative Snap-in Plastic Inserts: Sunset 505.m. Decorative Snap-in Plastic Inserts: Sunset 506.n. Decorative Snap-in Plastic Inserts: Charleston 508.o. Decorative Snap-in Plastic Inserts: Colonial 509.p. Decorative Snap-in Plastic Inserts: Prairie 510.

25. Windows: Provide optional Decorative Short Panel Windows; injection molded ASA plastic windows measuring 19-1/2 inches x 12 inches (495 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Short, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Short, frosted DSB glass, leaded-look.

08 36 13 -11

d. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.e. Glazing: Tuscany Short wrought iron acrylic.f. Glazing: Orleans Short wrought iron acrylic.


27. Windows: Provide optional Decorative Insert Series Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 3/32 inch (2.5 mm) clear SSB glass.b. Glazing: 1/8 inch (3 mm) clear DSB glass.c. Glazing: 1/8 inch (3 mm) obscure DSB glass.d. Glazing: 1/8 inch (3 mm) Clear acrylic.e. Glazing: 1/8 inch (3 mm) Frosted glass.f. Glazing: 1/8 inch (3 mm) Rain glass.g. Glazing: 1/8 inch (3 mm) Seeded glass.h. Decorative Snap-in Plastic Inserts: Sunset 601.i. Decorative Snap-in Plastic Inserts: Sunset 603.j. Decorative Snap-in Plastic Inserts: Sunset 605.k. Decorative Snap-in Plastic Inserts: Charleston 608.l. Decorative Snap-in Plastic Inserts: Prairie 610.m. Decorative Snap-in Plastic Inserts: Madison 611.n. Decorative Snap-in Plastic Inserts: Stockton 612.o. Decorative Snap-in Plastic Inserts: Madison Arch 613.

28. Windows: Provide optional Decorative Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Long, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Long, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Long, frosted DSB glass, leaded-look.d. Glazing: 1/8 inch (3 mm) Trenton Long, frosted DSB glass, leaded-look.e. Glazing: Tuscany Long wrought iron acrylic.f. Glazing: Orleans Long wrought iron acrylic.

29. Interior Finish: Vinyl backer over expanded polystyrene (EPS) insulation.30. Exterior Finish:

a. Finish Type: Woodgrain embossed texture, Short Traditional Panel embossments.

b. Finish Type: Woodgrain embossed texture with Long Traditional Panel embossments.

c. Color: Standard White.d. Color: Almond.e. Color: Desert Tan.f. Color: Sandtone.g. Color: Chocolate.

31. Locking: Standard, keyed spring-loaded lock bar.32. Locking: Provide optional keyed spring-loaded snap latches.

08 36 13 -12

33. Locking: Provide optional non-keyed interior slide bolt.34. Weatherstripping: Standard, Provide U-shaped bottom seal.35. Perimeter Seals: _____.36. Tracks: Vertical tracks minimum 0.040 inch (1.02 mm) galvanized steel tapered and


2.6 RESIDENTIAL STEEL SECTIONAL DOORS, NON-INSULATED - Value Series

A. Residential Steel Sectional Doors: Classic Collection Value Series as manufactured by Clopay Corporation.1. Clopay Model 73: 25 Ga. Ship-Lap Joint Model Short Panel.2. Clopay Model 76: 25 Ga. Ship-Lap Joint Long Panel Model.3. Clopay Model 94: 24 Ga. Ship-Lap Joint Short Panel Model.4. Clopay Model T40S: 24 Ga. Tongue and Groove Joint Short Panel Model.5. Clopay Model T40L: 24 Ga. Tongue and Groove Joint Long Panel Model.6. Clopay Model T50S: 25 Ga. Tongue and Groove Joint Short Panel Model.7. Clopay Model T50L: 25 Ga. Tongue and Groove Joint Long Panel Model.8. Door Construction:

a. Sections: Steel frame and skin construction.b. Steel Skins: Formed from Short Traditional Panel embossed commercial or


c. Steel Skins: Formed from Long Traditional Panel embossed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Section Joints: Sections formed to create tongue and groove meeting joint.e. Reinforcing: Galvanized and primed steel reinforcement located under each

hinge location, pre-punched for hinge attachment.f. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy

hinge attachment.g. Connections: Stiles fastened to steel skins using Tog-L-Loc system.h. Handles: 2 High impact polymer step plate/lift handles to comply with DASMA

116 and be color-matched to the door sections.9. Maximum Door Size: 18 ft (5.5 m) wide by 16 ft (4.9 m) high. - 25 Ga product.10. Maximum Door Size: 20 ft (6.1 m) wide by 16 ft (4.9 m) high. - 24 Ga products11. Overall Panel Thickness: 2.125 inches (54 mm).12. Overall Panel Thickness: 2 inches (51 mm).13. Steel Skin Thickness: Minimum 25 gauge 0.019 inch (0.48 mm)14. Steel Skin Thickness: Minimum 24 gauge 0.022 inch (0.56 mm)15. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment

through pre-punched holes. Minimum 18 gauge, 0.049 inch (1.25 mm) thick.16. Bottom Panel Sections: Reinforced with continuous 0.040 inch (1.016 mm) aluminum

astragal retainer with bulb-shaped flexible PVC astragal.17. Bottom Sections: Reinforced with continuous 0.040 inch (1.016 mm) aluminum

08 36 13 -13

astragal retainer with U-shaped flexible PVC astragal.18. Windows: None, doors come standard with no windows.19. Windows: Provide optional Decorative Insert Series Short Panel Windows; injection

molded ASA plastic windows measuring 19-1/2 inches x 12 inches (495 mm x 305 mm).a. Glazing: 3/32 inches (2.5 mm) clear SSB glass.b. Glazing: 1/8 inches (3 mm) clear DSB glass.c. Glazing: 1/8 inches (3 mm) obscure DSB glass.d. Glazing: 1/8 inch (3 mm) Clear acrylic.e. Glazing: 1/8 inch (3 mm) Frosted glass.f. Glazing: 1/8 inch (3 mm) Rain glass.g. Glazing: 1/8 inch (3 mm) Seeded glass.h. Decorative Snap-in Plastic Inserts: Sunset 501.i. Decorative Snap-in Plastic Inserts: Sunset 502.j. Decorative Snap-in Plastic Inserts: Sunset 503.k. Decorative Snap-in Plastic Inserts: Sunset 504.l. Decorative Snap-in Plastic Inserts: Sunset 505.m. Decorative Snap-in Plastic Inserts: Sunset 506.n. Decorative Snap-in Plastic Inserts: Charleston 508.o. Decorative Snap-in Plastic Inserts: Colonial 509.p. Decorative Snap-in Plastic Inserts: Prairie 510.


21. Windows: Provide optional Decorative Short Panel Windows; injection molded ASA plastic windows measuring 19-1/2 inches x 12 inches (495 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Short, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Short, frosted DSB glass, leaded-look.d. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.e. Glazing: Tuscany Short wrought iron acrylic.f. Glazing: Orleans Short wrought iron acrylic.

22. Windows: Provide optional Decorative Insert Series Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 3/32 inch (2.5 mm) clear SSB glass.b. Glazing: 1/8 inch (3 mm) clear DSB glass.c. Glazing: 1/8 inch (3 mm) obscure DSB glass.d. Glazing: 1/8 inch (3 mm) Clear acrylic.e. Glazing: 1/8 inch (3 mm) Frosted glass.f. Glazing: 1/8 inch (3 mm) Rain glass.g. Glazing: 1/8 inch (3 mm) Seeded glass.h. Decorative Snap-in Plastic Inserts: Sunset 601.i. Decorative Snap-in Plastic Inserts: Sunset 603.j. Decorative Snap-in Plastic Inserts: Sunset 605.

08 36 13 -14

k. Decorative Snap-in Plastic Inserts: Charleston 608.l. Decorative Snap-in Plastic Inserts: Prairie 610.m. Decorative Snap-in Plastic Inserts: Madison 611.n. Decorative Snap-in Plastic Inserts: Stockton 612.o. Decorative Snap-in Plastic Inserts: Madison Arch 613.

23. Windows: Provide optional Decorative Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Long, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Long, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Long, frosted DSB glass, leaded-look.d. Glazing: 1/8 inch (3 mm) Trenton Long, frosted DSB glass, leaded-look.e. Glazing: Tuscany Long wrought iron acrylic.f. Glazing: Orleans Long wrought iron acrylic.

24. Interior Finish: Woodgrain embossed texture with white interior color.25. Exterior Finish:

a. Finish Type: Woodgrain embossed texture, Short Traditional Panel embossments.

b. Finish Type: Woodgrain embossed texture with Long Traditional Panel embossments.

c. Color: White.d. Color: Almond.e. Color: Desert Tan.f. Color: Sandtone.g. Color: Chocolate.

26. Locking: Standard, keyed spring-loaded lock bar.27. Locking: Provide optional keyed spring-loaded snap latches.28. Locking: Provide optional non-keyed interior slide bolt.29. Weatherstripping: Standard, Provide U-shaped bottom seal.30. Perimeter Seals: _____.31. Tracks: Vertical tracks minimum 0.040 inch (1.02 mm) galvanized steel tapered and


2.7 RESIDENTIAL SECTIONAL DOORS - Coachman Collection

A. Residential Sectional Doors: Coachman Collection Doors as manufactured by Clopay Corporation.1. Model: Clopay Model CD Series; Thermally-broken, 1-3/8" thick expanded polystyrene

(EPS) insulated.2. Model: Clopay Model CG Series; Thermally-broken, 2 inches thick expanded

polystyrene (EPS) insulated.3. Model: Clopay Model CGU Series; Intellicore 2 inches thick polyurethane insulated.4. Door Construction:

a. Sections: Composite overlays adhered to base door constructed of pressure bonded expanded polystyrene (EPS) core construction between exterior and

08 36 13 -15

interior steel skins.b. Sections: Composite overlays adhered to base door constructed of foamed in

place Intellicore core construction between exterior and interior steel skins.c. Exterior Steel Skins: Formed from flush commercial or drawing quality steel

sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Interior Steel Skins: Formed from roll formed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

e. Section Joints: Sections formed to create tongue-in-groove meeting joint with thermal break.

f. Reinforcing: Galvanized and primed steel reinforcement located under each hinge location, pre-punched for hinge attachment.

g. Connections: Stiles fastened to steel skins using Tog-L-Loc system.h. Handles: Black powder coated, hot-dipped galvanized step plate and lift handle

(2 sets on doors over 10 ft wide) to comply with DASMA 116.5. Maximum Door Size: 1-3/8 inch thick base door 18 ft (5.5 m) wide by 16 ft (4.9 m)

high.6. Maximum Door Size: 2 inch thick base door 20 ft (6.1 m) wide by 16 ft (4.9 m) high.7. Steel Skin Thickness: EPS Minimum 27 gauge 0.016 inch (0.40 mm) exterior;

minimum 28 gauge 0.015 inch (0.38 mm) interior.8. Steel Skin Thickness: Intellicore Minimum 27 gauge 0.016 inch (0.40 mm) exterior;

minimum 29 gauge 0.012 inch (0.30 mm) interior.9. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment


retainer with U-shaped flexible PVC astragal.11. Thermal Resistance: Calculated in accordance with DASMA TDS-163.

a. R-Value: 6.5 deg F hr sq ft/Btu.b. R-Value: 9.0 deg F hr sq ft/Btu.c. R-Value: 18.4 deg F hr sq ft/Btu.

12. Windows: None, doors come standard with no windows.13. Windows: Provide optional REC11 Windows.14. Windows: Provide optional REC13 Windows.15. Windows: Provide optional REC14 Windows.16. Windows: Provide optional SQ23 Windows.17. Windows: Provide optional SQ24 Windows.18. Windows: Provide optional ARCH1 Windows.19. Windows: Provide optional ARCH3 Windows.20. Windows: Provide optional ARCH4 Windows.21. Windows: Provide optional ARC1A Windows.22. Windows: Provide optional ARC3A Windows.23. Windows: Provide optional ARC4A Windows.24. Glazing: 1/8 inch (3 mm) clear DSB glass.25. Glazing: 1/8 inch (3 mm) obscure DSB glass.26. Glazing: 1/8 inch (3 mm) seeded DSB glass.27. Glazing: 1/2 inch (12 mm) insulated clear DSB glass.28. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.29. Glazing: 1/2 inch (12 mm) insulated seeded DSB glass.30. Glazing: 1/8 inch (3 mm) Frosted glass.31. Glazing: 1/2 inch (12 mm) insulated Frosted glass.32. Glazing: 1/8 inch (3 mm) Rain glass.33. Glazing: 1/2 inch (12 mm) insulated Rain glass.34. Window Height: As scheduled and indicated on Drawings in accordance with

manufacturer's guidelines.35. Window Width: As scheduled and indicated on Drawings in accordance with

08 36 13 -16

manufacturer's guidelines.36. Interior Finish: Stucco embossed texture with flush design, white interior color.37. Interior Finish: Stucco embossed texture with shallow U ribbed pattern, white interior

color.38. Steel Base Door Exterior Finish: Woodgrain embossed texture with flush design.

a. Color: White.b. Color: Almond.c. Color: Desert Tan.d. Color: Sandtone.

39. Composite Overlays Exterior Finish: Woodgrain embossed texture with beveled coped edges.a. Color: White.b. Color: Almond.c. Color: Desert Tan.d. Color: Sandtone.

40. Locking: Standard, non-keyed interior slide bolt.41. Locking: Provide optional decorative keyed snap latch lock.42. Weatherstripping: Standard, Provide U-shaped bottom seal.43. Perimeter Seals: _____.44. Tracks: Vertical tracks minimum 0.060 inch (1.524 mm) galvanized steel tapered and


2.8 RESIDENTIAL STEEL SECTIONAL DOORS - Gallery Collection

A. Residential Steel Sectional Doors: Gallery Collection Doors as manufactured by Clopay Corporation.1. Model: GD4S, Non-insulated.2. Model: GD4L, Non-insulated.3. Model: GD4SV, polystyrene insulated.4. Model: GD4LV, polystyrene insulated.5. Model: GD5S, Non-insulated6. Model: GD5SV, polystyrene insulated.7. Thermal Resistance (R-value): 6.3 deg F hr sq ft/Btu; calculated in accordance with

DASMA TDS-163.8. Door Construction:

a. Sections: Steel frame and skin construction.b. Sections: Steel frame and skin construction with 1-5/16 inch thick polystyrene

insulation with vinyl backer.c. Steel Skins: Formed from Short Grooved Panel embossed commercial or


d. Steel Skins: Formed from Long Grooved Panel embossed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

08 36 13 -17

e. Section Joints: Sections formed to create shiplap meeting joint.f. Reinforcing: Galvanized and primed steel reinforcement located under each

hinge location, pre-punched for hinge attachment.g. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy

hinge attachment.h. Connections: Stiles fastened to steel skins using Tog-L-Loc system.i. Handles: Black powder coated, hot-dipped galvanized step plate and lift handle

(2 sets on doors over 10 ft wide) to comply with DASMA 116.9. Maximum Door Size: 18 feet (5.5 m) wide by 16 feet (4.9 m) high for GD5S & GD5SV.

UP to 20 feet ft (5.5 m) wide by 16 feet (4.9 m) for GD4S, GD4L, GD4SV, GD4LV.10. Overall Panel Thickness: 2.125 inches (54 mm).11. Steel Skin Thickness: Minimum 24 gauge 0.022 inch (0.56 mm).12. Steel Skin Thickness: Minimum 25 gauge 0.019 inch (0.48 mm).13. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment


retainer with bulb-shaped flexible PVC astragal.15. Windows: None, doors come standard with no windows.16. Windows: Provide optional Architectural Series Short Windows; extruded cellular PVC

windows measuring 19 -1/2 inches x 16 inches.a. Grilles: Short with square grilles, SQ22.b. Grilles: Short with rectangular grilles, REC11.c. Grilles: Plain Short, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/8 inch (3 mm) Frosted glass.g. Glazing: 1/8 inch (3 mm) Rain glass.h. Glazing: 1/8 inch (3 mm) Seeded glass.i. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.j. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.k. Glazing: 1/8 inch (3 mm) Clayton Short, frosted DSB glass, leaded-look.l. Glazing: Wrought Iron Short, acrylic.

17. Windows: Provide optional Architectural Series Long Windows; extruded cellular PVC windows measuring 42 inches x 16 inches.a. Grilles: Long with square grilles, SQ24.b. Grilles: Long with rectangular grilles, REC14.c. Grilles: Plain Long, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/8 inch (3 mm) Frosted glass.g. Glazing: 1/8 inch (3 mm) Rain glass.h. Glazing: 1/8 inch (3 mm) Seeded glass.i. Glazing: 1/8 inch (3 mm) Kristin Long frosted DSB glass, leaded-look.j. Glazing: 1/8 inch (3 mm) Trenton Long, frosted DSB glass, leaded-look.k. Glazing: 1/8 inch (3 mm) Clayton Long, frosted DSB glass, leaded-look.l. Glazing: Wrought Iron Long, acrylic.

18. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb impact as per the Florida Building Code) measuring 19-1/2 inches x 16 inches (495 mm x 406 mm).a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonate.e. Grilles: Short with square grilles, SQ22.f. Grilles: Plain Short, no grilles.

08 36 13 -18

19. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb impact as per the Florida Building Code) measuring 42 inches x 16 inches (1067 mm x 406 mm).a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonatee. Grilles: Long with square grilles, SQ24.f. Grilles: Plain Long, no grilles.

20. Windows: Provide optional Architectural Series ARCH1 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches with a 159 -1/2 inch radius top.a. Grilles: Snap-in plastic square grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/8 inch (3 mm) Frosted glass.g. Glazing: 1/8 inch (3 mm) Rain glass.h. Glazing: 1/8 inch (3 mm) Seeded glass.

21. Windows: Provide optional Architectural Series ARCH2 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches with a 39-3/4 inch radius top.a. Grilles: Snap-in plastic square grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/8 inch (3 mm) Frosted glass.g. Glazing: 1/8 inch (3 mm) Rain glass.h. Glazing: 1/8 inch (3 mm) Seeded glass.i. Glazing: Wrought Iron ARCH, acrylic.

22. Windows: Provide optional Architectural Series ARCH3 Window Design; created by mixing Architectural Series Long windows measuring 42 inches x 16 inches with ARCH1 windows measuring 42 inches x 16 inches with a 159 -1/2 inch radius top.a. Grilles: Snap-in plastic square grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/8 inch (3 mm) Frosted glass.g. Glazing: 1/8 inch (3 mm) Rain glass.h. Glazing: 1/8 inch (3 mm) Seeded glass.

23. Interior Finish: Woodgrain embossed texture with white interior color.24. Interior Finish: Vinyl backer over polystyrene insulation.25. Exterior Finish:

a. Finish Type: Woodgrain embossed texture with Short Grooved Panel embossments.

b. Finish Type: Woodgrain embossed texture with Long Grooved Panel embossments:

c. Color: White.d. Color: Almond.e. Color: Desert Tan.f. Color: Sandtone.g. Color: Chocolate.h. Color: Clopay Color Blast ____.

26. Locking: Standard, keyed spring-loaded lock bar.

08 36 13 -19

27. Locking: Provide optional keyed spring-loaded snap latches.28. Locking: Provide optional non-keyed interior slide bolt.29. Weatherstripping: Standard, Provide bulb-shaped bottom seal.30. Perimeter Seals: _____.31. Tracks: Vertical tracks minimum 0.040 inch (1.02 mm) galvanized steel tapered and


2.9 RESIDENTIAL STEEL SECTIONAL DOORS - Gallery Collection

A. Residential Steel Sectional Doors: Gallery Collection Doors as manufactured by Clopay Corporation.1. Model: GD1SP, Thermally-Broken, Expanded Polystyrene (EPS) Insulated.2. Model: GD1LP, Thermally-Broken, Expanded Polystyrene (EPS) Insulated.3. Model: GD1SU, Thermally-Broken, Intellicore Polyurethane Insulated.4. Model: GD1LU, Thermally-Broken, Intellicore Polyurethane Insulated.5. Model: GD2SP, Thermally-Broken, Expanded Polystyrene (EPS) Insulated.6. Model: GD2LP, Thermally-Broken, Expanded Polystyrene (EPS) Insulated.7. Model: GD2SU, Thermally-Broken, Intellicore Polyurethane Insulated.8. Model: GD2LU, Thermally-Broken, Intellicore Polyurethane Insulated.9. Door Construction:

a. Sections: Pressure bonded expanded polystyrene (EPS) core construction between exterior and interior steel skins.

b. Sections: Foamed in place Intellicore Polyurethane core construction between exterior and interior steel skins.

c. Exterior Steel Skins: Formed from Short Grooved Panel embossed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Exterior Steel Skins: Formed from Long Grooved Panel embossed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

e. Interior Steel Skins: Formed from roll formed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

f. Section Joints: Sections formed to create tongue-in-groove meeting joint with thermal break.

g. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy hinge attachment.

h. Reinforcing: Galvanized and primed steel reinforcement located under each hinge location, pre-punched for hinge attachment.

i. Handles: Black powder coated, hot-dipped galvanized step plate and lift handle (2 sets on doors over 10 ft wide) to comply with DASMA 116.

10. Maximum Door Size: 18 ft (5.5 m) wide by 16 ft (4.9 m) high.11. Maximum Door Size: 20 ft (6.1 m) wide by 16 ft (4.9 m) high.12. Overall Panel Thickness: 1.375 inches (35 mm).

08 36 13 -20

13. Overall Panel Thickness: 2 inches (35 mm).14. Steel Skin Thickness: Minimum 27 gauge 0.016 inch (0.40 mm) exterior; minimum 28

gauge 0.015 inch (0.38 mm) interior.15. Steel Skin Thickness: Minimum 27 gauge 0.016 inch (0.40 mm) exterior; minimum 29



gauge 0.012 inch (0.30 mm) interior.18. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment


retainer with U-shaped flexible PVC astragal.20. Thermal Resistance: Calculated in accordance with DASMA TDS-163

a. R-Value: 6.5 deg F hr sq ft/Btu.b. R-Value: 9.0 deg F hr sq ft/Btu.c. R-Value: 12.9 deg F hr sq ft/Btu.d. R-Value: 18.4 deg F hr sq ft/Btu.

21. Windows: None, doors come standard with no windows.22. Windows: Provide optional Architectural Series Short Windows; extruded cellular PVC

windows measuring 19-1/2 inches x 16 inches.a. Grilles: Short with square grilles, SQ22.b. Grilles: Short with rectangular grilles, REC11.c. Grilles: Plain Short, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.n. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.o. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.p. Glazing: 1/8 inch (3 mm) Clayton Short, frosted DSB glass, leaded-look.q. Glazing: 1/2 inch (12 mm) Kristin Short, frosted insulated DSB glass, leaded-

look.r. Glazing: 1/2 inch (12 mm) Trenton Short, frosted insulated DSB glass, leaded-

look.s. Glazing: 1/2 inch (12 mm) Clayton Short, frosted insulated DSB glass, leaded-

look.t. Glazing: Wrought Iron Short, acrylic.

23. Windows: Provide optional Architectural Series Long Windows, extruded cellular PVC windows measuring 42 inches x 16 inches.a. Grilles: Long with square grilles, SQ24.b. Grilles: Long with rectangular grilles, REC14.c. Grilles: Plain Long, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.

08 36 13 -21

k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.n. Glazing: 1/8 inch (3 mm) Kristin Long, frosted DSB glass, leaded-look.o. Glazing: 1/8 inch (3 mm) Trenton Long frosted DSB glass, leaded-look.p. Glazing: 1/8 inch (3 mm) Clayton Long, frosted DSB glass, leaded-look.q. Glazing: 1/2 inch (12 mm) Kristin Long, frosted insulated DSB glass, leaded-

look.r. Glazing: 1/2 inch (12 mm) Trenton Long, frosted insulated DSB glass, leaded-

look.s. Glazing: 1/2 inch (12 mm) Clayton Long, frosted insulated DSB glass, leaded-

look.t. Glazing: Wrought Iron Long, acrylic.

24. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb impact as per the Florida Building Code) measuring 19-12 inches x 16 inches (495 mm x 406 mm).a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonate.e. Grilles: Short with square grilles, SQ22.f. Grilles: Plain Short, no grilles.

25. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb impact as per the Florida Building Code) measuring 42 inches x 16 inches (1067 mm x 406 mm).a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonate.e. Grilles: Long with square grilles, SQ24.f. Grilles: Plain Long, no grilles.

26. Windows: Provide optional Architectural Series ARCH1 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches with a 159-1/2 inch radius top.a. Grilles: Snap-in plastic square grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glassg. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.

27. Windows: Provide optional Architectural Series ARCH2 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches with a 39-3/4 inches radius top.a. Grilles: Snap-in plastic square grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.

08 36 13 -22

g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.n. Glazing: Wrought Iron ARCH, Acrylic.

28. Windows: Provide optional Architectural Series ARCH3 Window Design; created by mixing Architectural Series Long windows measuring 42 inches x 16 inches with ARCH1 windows measuring 42 inches x 16 inches with a 159-1/2 inch radius top.a. Grilles: Snap-in plastic square grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Rain glass.k. Glazing: 1/2 inch (12 mm) insulated Rain glass.l. Glazing: 1/8 inch (3 mm) Seeded glass.m. Glazing: 1/2 inch (12 mm) insulated Seeded glass.

29. Interior Finish: Stucco embossed texture with flush design, white interior color.30. Interior Finish: Stucco embossed texture with shallow U-ribbed pattern, white interior

color.31. Exterior Finish:

a. Finish Type: Woodgrain embossed texture with Short Grooved Panel embossments.

b. Finish Type: Woodgrain embossed texture with Long Grooved Panel embossments.

c. Color: Standard White.d. Color: Glacier White.e. Color: Almond.f. Color: Desert Tan.g. Color: Sandtone.h. Color: Bronze.i. Color: Chocolate.j. Color: Mocha Brown.k. Color: Blackl. Color: Clopay Color Blast _____.

32. Exterior Finish:a. Finish Type: Ultra-Grain Exterior Finish; stucco embossed texture with Short

Grooved Panel embossmentsb. Finish Type: Ultra-Grain Exterior Finish; stucco embossed texture with Long

Grooved Panel embossments.c. Color: Ultra-Grain Oak Medium Finish.d. Color: Ultra-Grain Oak Dark Finish.e. Color: Ultra-Grain Oak Walnut Finish.

33. Locking: Standard, keyed spring-loaded lock bar.34. Locking: Provide optional keyed spring-loaded snap latches.35. Locking: Provide optional non-keyed interior slide bolt.36. Weatherstripping: Standard, Provide U-shaped bottom seal.37. Perimeter Seals: _____.38. Tracks: Vertical tracks minimum 0.040 inch (1.016 mm) galvanized steel tapered and

08 36 13 -23


2.10 RESIDENTIAL SECTIONAL DOORS - Grand Harbor Collection

A. Residential Sectional Doors: Grand Harbor Collection as manufactured by Clopay Corporation.1. Model: GH11 24-ga, Wood-grain Embossed Flush Steel Pan Doors w/Decorative

Composite Overlays.2. Model: GH12 24-ga, Wood-grain Embossed Flush Steel Pan Doors w/Decorative







Composite Overlays.9. Model: GH00: 24-ga, Wood-grain Embossed Flush Steel Pan Replacement Sections

w/ no Overlays.10. Door Construction:

a. Sections: Composite overlays adhered to base door constructed of steel frame and skin construction.

b. Sections: Composite overlays adhered to base door constructed of steel frame and skin construction with 1-5/8 inch thick expanded polystyrene (EPS) insulation with vinyl backer.

c. Steel Skins: Formed from flush commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Section Joints: Sections formed to create shiplap meeting joint.e. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy

hinge attachment.f. Connections: Stiles fastened to steel skins using Tog-L-Loc system.g. Handles: Black powder coated, hot-dipped galvanized step plate and lift handle

(2 sets on doors over 10 ft wide) to comply with DASMA 116.11. Maximum Door Size: 18 ft (5.5 m) wide by 12 ft (3.66 m) high.12. Base Door Thickness: 2.125 inches (54 mm).13. Overall Panel Thickness: 2.625 inches (67 mm).14. Steel Skin Thickness: Minimum 24 gauge 0.022 inch (0.56 mm).15. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment

08 36 13 -24


retainer with U-shaped flexible PVC astragal.17. Thermal Resistance (R-value): 6.3 deg F hr sq ft/Btu ; calculated in accordance with

DASMA TDS-163.18. Windows: None, doors come standard with no windows.19. Windows: Provide optional Short Windows; extruded cellular PVC windows measuring

19-1/2 inches x 16 inches.a. Grilles: Snap-in plastic square grilles, SQ22.b. Grilles: Rectangular grilles, REC12.c. Grilles: Plain Short, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: Wrought Iron Short, acrylic.

20. Windows: Provide optional Long Windows: Extruded cellular PVC windows measuring 42 inches x 16 inches.a. Grilles: Snap-in plastic square grilles, SQ24.b. Grilles: Rectangular grilles, REC14.c. Grilles: Plain Long, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: Wrought Iron Long, acrylic.

21. Windows: Provide optional ARCH1 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches with a 159-1/2 inch radius top.a. Glazing: 1/8 inch (3 mm) clear DSB glass.b. Glazing: 1/8 inch (3 mm) obscure DSB glass.c. Grilles: Snap-in plastic square grilles, GRLA1.d. Grilles: Vertical grilles, GRVA1.e. Grilles: Plain, no grilles.

22. Windows: Provide optional XG24 "Faux Window" Design, measuring 42 inches x 16 inches, created using a solid dark gray steel background with decorative snap-in plastic Grilles.a. Glazing: None.

23. Windows: Provide optional XG14 "Faux Window" Design, measuring 42 inches x 16 inches, created using a solid dark gray steel background with decorative snap-in plastic Grilles.a. Glazing: None.

24. Windows: Provide optional XA24 "Faux Window" Design, measuring 42 inches x 16 inches with a 159-1/2 inch radius top, created using a solid dark gray steel background with decorative snap-in plastic Grilles.a. Glazing: None.

25. Interior Finish: Vinyl backer over expanded polystyrene (EPS) insulation.26. Exterior Finish: Base Door Woodgrain embossed texture with flush design.

a. Color: White.b. Color: Almond.c. Color: Desert Tan.d. Color: Sandtone.

27. Locking: Standard, non-keyed interior slide bolt.28. Locking: Provide optional decorative keyed snap latch lock.29. Weatherstripping: Standard, Provide bulb shaped bottom seal.30. Perimeter Seals: _____.31. Tracks: Vertical tracks minimum 0.040 inch (1.016 mm) galvanized steel tapered and

mounted for wedge type closing. Horizontal tracks minimum 0.060 inch (1.524 mm) galvanized steel, reinforced with minimum 0.0897 inch (2.28 mm) galvanized steel angles as required.a. Track Type: Provide standard lift tracks.

08 36 13 -25

b. Track Type: Provide optional low headroom track.c. Track Type: Provide optional high lift track.d. Track Type: Provide optional follow-the-roof track.e. Track Width: 2 inches (50 mm).f. Track Radius: 10 inch (254 mm).g. Track Radius: 12 inch (305 mm).h. Track Radius: 15 inch (381 mm).i. Track Radius: 20 inch (508 mm).j. Track Radius: 32 inch (813 mm).

2.11 RESIDENTIAL SECTIONAL DOORS - Canyon Ridge Collection

A. Residential Sectional Doors: Canyon Ridge Collection as manufactured by Clopay Corporation.1. Model: Clopay Model CAN2 Limited Edition Series Doors.2. Model: Clopay Model CAN2 Ultra-Grain Series Doors.3. Door Construction:

a. Sections: Composite cladding and overlays adhered to base door constructed of foamed in place Intellicore polyurethane core construction between exterior and interior steel skins.

b. Exterior Steel Skins: Formed from flush commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

c. Interior Steel Skins: Formed from roll formed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Section Joints: Sections formed to create weather tight tongue-in-groove meeting joint with thermal break.

e. Reinforcing: Galvanized and primed steel reinforcement located under each hinge location, pre-punched for hinge attachment.

f. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy hinge attachment.

g. Handles: Black powder coated, hot-dipped galvanized step plate and lift handle (2 sets on doors over 10 ft wide) to comply with DASMA 116.

4. Maximum Door Size: 20 ft (6.1 m) wide by 10 ft (3.05 m) high.5. Base Door Thickness: 2 inches (51 mm).6. Overall Panel Thickness: 3 inches (76.2 mm).7. Overall Panel Thickness: 2.5 inches (63.5 mm).8. Steel Skin Thickness: Minimum 27 gauge 0.016 inch (0.40 mm) exterior; minimum 29

gauge 0.012 inch (0.30 mm) interior.9. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment


retainer with U-shaped flexible PVC astragal.11. Thermal Resistance: Calculated in accordance with DASMA TDS-16.

a. R-Value: 20.4 deg F hr sq ft/Btu.b. R-Value: 18.4 deg F hr sq ft/Btu.

12. Windows: None, doors come standard with no windows.13. Windows: Provide optional REC11 Windows.14. Windows: Provide optional REC13 Windows.15. Windows: Provide optional REC14 Windows.16. Windows: Provide optional SQ23 Windows.17. Windows: Provide optional SQ24 Windows.18. Windows: Provide optional ARCH1 Windows.19. Windows: Provide optional ARCH3 Windows.20. Windows: Provide optional ARCH4 Windows.

08 36 13 -26

21. Windows: Provide optional ARC1A Windows.22. Windows: Provide optional ARC3A Windows.23. Windows: Provide optional ARC4A Windows.24. Glazing: 1/8 inch (3 mm) clear DSB glass.25. Glazing: 1/8 inch (3 mm) obscure DSB glass.26. Glazing: 1/8 inch (3 mm) seeded DSB glass.27. Glazing: 1/2 inch (12 mm) insulated clear DSB glass.28. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.29. Glazing: 1/2 inch (12 mm) insulated seeded DSB glass.30. Glazing: 1/8 inch (3 mm) Frosted glass.31. Glazing: 1/2 inch (12 mm) insulated Frosted glass.32. Glazing: 1/8 inch (3 mm) Rain glass.33. Glazing: 1/2 inch (12 mm) insulated Rain glass.34. Window Height: 11 inches (279.4 mm) on 21 inches (533.4 mm) high sections.35. Window Height: 14 inches (355.6 mm) on 24 inches (609.6 mm) high sections.36. Window Width: As scheduled and indicated on Drawings in accordance with

manufacturer's guidelines.37. Interior Finish: Stucco embossed texture with shallow U ribbed pattern, white interior

color.38. Exterior Finish: Composite cladding.

a. Color: Medium Finish.b. Color: Dark Finish.c. Color: Walnut Finish.d. Color: Whitewash Finish.e. Color: Primed.f. Texture: Clear Cypress woodgrain.g. Texture: Pecky Cypress woodgrain.h. Texture: Mahogany woodgrain.

39. Exterior Finish: Composite overlays.a. Color: Medium Finish.b. Color: Dark Finish.c. Color: Walnut Finish.d. Color: Whitewash Finish.e. Color: Primed.f. Texture: Clear Cypress woodgrain.g. Texture: Mahogany woodgrain.

40. Exterior Finish: Ultra-Grain Base Door Woodgrain embossed texture with flush design in one of the following color options to simulate the look of stained wood:a. Color: Ultra-Grain Cypress Medium Finish.b. Color: Ultra-Grain Cypress Walnut Finish.

41. Exterior Finish: Composite overlays with Clear Cypress woodgrain texture and square edges.a. Color: Medium Finish.b. Color: Walnut Finish.

42. Locking: Standard, non-keyed interior slide bolt.43. Locking: Provide optional decorative keyed snap latch lock.44. Weatherstripping: Standard, Provide U -shaped bottom seal.45. Perimeter Seals: _____.46. Tracks: Vertical tracks minimum 0.060 inch (1.524 mm) galvanized steel tapered and

mounted for wedge type closing. Horizontal tracks minimum 0.075 inch (1.905 mm) galvanized steel, reinforced with minimum 0.0897 inch (2.28 mm) galvanized steel angles as required.a. Track Type: Provide standard lift tracks.b. Track Type: Provide optional low headroom track.c. Track Type: Provide optional high lift track.d. Track Type: Provide optional follow-the-roof track.

08 36 13 -27

e. Track Width: 2 inches (50 mm).f. Track Radius: 10 inch (254 mm).g. Track Radius: 12 inch (305 mm).h. Track Radius: 15 inch (381 mm).i. Track Radius: 20 inch (508 mm).j. Track Radius: 32 inch (813 mm).

2.12 RESIDENTIAL SECTIONAL DOORS - Modern Steel Collection

A. Residential Steel Sectional Doors: Modern Steel Collection as manufactured by Clopay Corporation.1. Expanded Polystyrene (EPS) Insulated 1-3/8" (35 mm) thick product:

a. Flush Model: Clopay Model 4051.b. Flush Model: Clopay Model 4132.c. Flush Model: Clopay Model 4138.

2. Expanded Polystyrene (EPS) Insulated 2 inches (51 mm) thick product:a. Flush Model: Clopay Model 4301.b. Flush Model: Clopay Model 4302.c. Flush Model: Clopay Model 4308.d. Grooved Model: Clopay Model 4305.e. Grooved Model: Clopay Model 4309.

3. Thermally-Broken, Intellicore Polyurethane insulated 1-3/8" (35 mm) thick product:a. Flush Model: Clopay Model 9131.b. Flush Model: Clopay Model 9132.c. Flush Model: Clopay Model 9138.d. Grooved Model: Clopay Model 9139.

4. Thermally-Broken, Intellicore Polyurethane insulated 2 inches (51 mm) thick product:a. Flush Model: Clopay Model 9201.b. Flush Model: Clopay Model 9202.c. Flush Model: Clopay Model 9208.d. Grooved Model: Clopay Model 9205e. Grooved Model: Clopay Model 9209.

5. Tongue and Groove Flush Models:a. Flush Model T40F: 24 Ga. Tongue and Groove Joint Flush Non- Insulated

Model.b. Flush Model T42F: 24 Ga. Tongue and Groove Joint Flush 1-5/16" insulated

Model.c. Flush Model T41F: 24 Ga. Tongue and Groove Joint Flush 7/8" insulated

Model:d. Flush Model T51F: 25 Ga. Tongue and Groove Joint Flush 7/8" insulated Model

6. Door Construction:a. Sections (EPS): Pressure bonded expanded polystyrene (EPS) core

construction between exterior and interior steel skins.b. Sections (Intellicore): Foamed in place Intellicore Polyurethane core

construction between exterior and interior steel skins.c. Exterior Steel Skins: Formed from flush commercial or drawing quality steel

sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

d. Interior Steel Skins: Formed from roll formed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A 924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcoat.

e. Section Joints: Sections formed to create tongue-in-groove meeting joint with thermal break.

f. Door Stiles: Galvanized steel end stiles and center stiles, pre-punched for easy hinge attachment.

g. Reinforcing: Galvanized and primed steel reinforcement located under each

08 36 13 -28

hinge location, pre-punched for hinge attachment.h. Connections: Stiles fastened to steel skins using Tog-L-Loc system.Handles: 2

High impact polymer step plate/lift handles to comply with DASMA 116 and be color-matched to the door sections.

7. Maximum Door (Size 1-3/8 inch Thick Product): 18 ft (5.5 m) wide by 16 ft (4.9 m) high.

8. Maximum Door (Size 2 inch Thick Product): 20 ft (6.1 m) wide by 16 ft (4.9 m) high.9. Steel Skin Thickness:

a. Exterior: Minimum 27 gauge 0.016 inch (0.40 mm).b. Exterior: Minimum 24 gauge 0.022 inch (.055) mm).c. Interior: Minimum 29 gauge 0.012 inch (0.30 mm). - Intellicore Doors.d. Interior: Minimum 27 gauge 0.015 inch (0.38 mm). - EPS Doors.

10. End Stiles: Galvanized steel end stiles, engineered for easy hardware attachment through pre-punched holes. Minimum 20 gauge, 0.034 inch (0.86 mm) thick.

11. Bottom Section: Reinforced with continuous 0.040 inch (1.016 mm) aluminum astragal retainer with U-shaped flexible PVC astragal.

12. Thermal Resistance: Calculated in accordance with DASMA TDS-163.a. EPS 1-3/8 inch (35 mm) Thick - R-Value: 6.5 (deg F hr sq ft/Btu.)b. EPS 2 inch (51 mm) Thick - R-Value: 9.0 (deg F hr sq ft/Btu.)c. Intellicore 1-3/8 inch (35 mm) Thick - R-Value: 12.9 (deg F hr sq ft/Btu.)d. Intellicore 2 inch (51 mm) Thick - R-Value: 18.4 (deg F hr sq ft/Btu.)

13. Windows: None, doors come standard with no windows.14. Optional Windows: Provide optional Decorative Insert Short Panel Windows; injection

molded ASA plastic windows measuring 19-1/2 inches x 12 inches (5495 mm x 305 mm).a. Glazing: 3/32 inch (2.5 mm) clear SSB glass.b. Glazing: 1/8 inch (3 mm) clear DSB glass.c. Glazing: 1/8 inch (3 mm) obscure DSB glass.d. Glazing: 1/2 inch (12 mm) insulated DSB glass.e. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.f. Glazing: 1/8 inch (3 mm) Clear acrylic.g. Glazing: 1/8 inch (3 mm) Frosted glass.h. Glazing: 1/2 inch (12 mm) insulated Frosted glass.i. Glazing: 1/8 inch (3 mm) Narrow Reed glass.j. Glazing: 1/2 inch (12 mm) insulated Narrow Reed glass.k. Decorative Snap-in Plastic Inserts: Sunset 501.l. Decorative Snap-in Plastic Inserts: Sunset 502.m. Decorative Snap-in Plastic Inserts: Sunset 503.n. Decorative Snap-in Plastic Inserts: Sunset 504.o. Decorative Snap-in Plastic Inserts: Sunset 505.p. Decorative Snap-in Plastic Inserts: Sunset 506.q. Decorative Snap-in Plastic Inserts: Charleston 508.r. Decorative Snap-in Plastic Inserts: Colonial 509.s. Decorative Snap-in Plastic Inserts: Prairie 510.

15. Windows: Provide optional Decorative Insert Series Impact Resistant Windows; woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb. impact as per the Florida Building Code) measuring 19-1/2 inches x 12 inches (5495 mm x 305 mm).a. Glazing: Clear Polycarbonate.b. Decorative Snap-in Plastic Inserts: Sunset 501.c. Decorative Snap-in Plastic Inserts: Sunset 502.d. Decorative Snap-in Plastic Inserts: Sunset 503.e. Decorative Snap-in Plastic Inserts: Sunset 504.f. Decorative Snap-in Plastic Inserts: Sunset 505.g. Decorative Snap-in Plastic Inserts: Sunset 506.h. Decorative Snap-in Plastic Inserts: Charleston 508.

08 36 13 -29

i. Decorative Snap-in Plastic Inserts: Colonial 509.j. Decorative Snap-in Plastic Inserts: Prairie 510.

16. Windows: Provide optional Decorative Short Panel Windows; injection molded ASA plastic windows measuring 19-1/2 inches x 12 inches (5495 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Short, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Short, frosted DSB glass, leaded-look.d. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.e. Glazing: 1/2 inch (12 mm) Carlisle Short, frosted insulated DSB glass, leaded-

look.f. Glazing: 1/2 inch (12 mm) Kristin Short, frosted insulated DSB glass, leaded-

look.g. Glazing: 1/2 inch (12 mm) Roselle Short, frosted insulated DSB glass, leaded-

look.h. Glazing: 1/2 inch (12 mm) Trenton Short, frosted insulated DSB glass, leaded-

look.i. Glazing: Tuscany Short Wrought Iron, acrylic.j. Glazing: Orleans Short Wrought Iron, acrylic.

17. Windows: Provide optional Decorative Insert Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 3/32 inch (2.5 mm) clear SSB glass.b. Glazing: 1/8 inch (3 mm) clear DSB glass.c. Glazing: 1/8 inch (3 mm) obscure DSB glass.d. Glazing: 1/2 inch (12 mm) insulated DSB glass.e. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.f. Glazing: 1/8 inch (3 mm) Clear acrylic.g. Glazing: 1/8 inch (3 mm) Frosted glass.h. Glazing: 1/2 inch (12 mm) insulated Frosted glass.i. Glazing: 1/8 inch (3 mm) Narrow Reed glass.j. Glazing: 1/2 inch (12 mm) insulated Narrow Reed glass.k. Decorative Snap-in Plastic Inserts: Sunset 601.l. Decorative Snap-in Plastic Inserts: Sunset 603.m. Decorative Snap-in Plastic Inserts: Sunset 605.n. Decorative Snap-in Plastic Inserts: Charleston 608.o. Decorative Snap-in Plastic Inserts: Prairie 610.p. Decorative Snap-in Plastic Inserts: Madison 611.q. Decorative Snap-in Plastic Inserts: Stockton 612.r. Decorative Snap-in Plastic Inserts: Madison Arch 613.

18. Windows: Provide optional Decorative Long Panel Windows; injection molded ASA plastic windows measuring 40-1/2 inches x 12 inches (1029 mm x 305 mm).a. Glazing: 1/8 inch (3 mm) Carlisle Long, frosted DSB glass, leaded-look.b. Glazing: 1/8 inch (3 mm) Kristin Long, frosted DSB glass, leaded-look.c. Glazing: 1/8 inch (3 mm) Roselle Long, frosted DSB glass, leaded-look.d. Glazing: 1/8 inch (3 mm) Trenton Long, frosted DSB glass, leaded-look.e. Glazing: 1/2 inch (12 mm) Carlisle Long, frosted insulated DSB glass, leaded-

look.f. Glazing: 1/2 inch (12 mm) Kristin Long, frosted insulated DSB glass, leaded-

look.g. Glazing: 1/2 inch (12 mm) Roselle Long, frosted insulated DSB glass, leaded-

look.h. Glazing: 1/2 inch (12 mm) Trenton Long, frosted insulated DSB glass, leaded-

look.i. Glazing: Tuscany Long Wrought Iron, acrylic.j. Glazing: Orleans Long Wrought Iron, acrylic.

19. Windows: Provide optional Architectural Series Short Windows; extruded cellular PVC windows measuring 19-1/2 inches x 16 inches (495 mm x 406 mm).

08 36 13 -30

a. Grilles: Short with square grilles, SQ22.b. Grilles: Short with rectangular grilles, REC11.c. Grilles: Plain Short, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Narrow Reed glass.k. Glazing: 1/2 inch (12 mm) insulated Narrow Reed glass.l. Glazing: 1/8 inch (3 mm) Kristin Short, frosted DSB glass, leaded-look.m. Glazing: 1/8 inch (3 mm) Trenton Short, frosted DSB glass, leaded-look.n. Glazing: 1/8 inch (3 mm) Clayton Short, frosted DSB glass, leaded-look.o. Glazing: 1/2 inch (12 mm) Kristin Short, frosted insulated DSB glass, leaded-

look.p. Glazing: 1/2 inch (12 mm) Trenton Short, frosted insulated DSB glass, leaded-

look.q. Glazing: 1/2 inch (12 mm) Clayton Short, frosted insulated DSB glass, leaded-

look.r. Glazing: Wrought Iron Short, acrylic.

20. Windows: Provide optional Architectural Series Long Windows; extruded cellular PVC windows measuring 42 inches x 16 inches (1067 mm x 406 mm).a. Grilles: Long with square grilles, SQ24.b. Grilles: Long with rectangular grilles, REC14.c. Grilles: Plain Long, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Narrow Reed glass.k. Glazing: 1/2 inch (12 mm) insulated Narrow Reed glass.l. Glazing: 1/8 inch (3 mm) Kristin Long, frosted DSB glass, leaded-look.m. Glazing: 1/8 inch (3 mm) Trenton Long, frosted DSB glass, leaded-look.n. Glazing: 1/8 inch (3 mm) Clayton Long, frosted DSB glass, leaded-look.o. Glazing: 1/2 inch (12 mm) Kristin Long, frosted insulated DSB glass, leaded-

look.p. Glazing: 1/2 inch (12 mm) Trenton Long, frosted insulated DSB glass, leaded-

look.q. Glazing: 1/2 inch (12 mm) Clayton Long, frosted insulated DSB glass, leaded-

look.r. Glazing: Wrought Iron Long, acrylic.

21. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-lb impact as per the Florida Building Code) measuring 19-12 inches x 16 inches (495 mm x 406 mm).a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonate.e. Grilles: Short with square grilles, SQ22.f. Grilles: Plain Short, no grilles.

22. Windows: Provide optional Decorative Insert Series Impact Resistant Windows, woodgrain textured, structurally enhanced window frames (to withstand up to a 350 ft-

08 36 13 -31

lb impact as per the Florida Building Code) measuring 42 inches x 16 inches (1067 mm x 406 mm).a. Glazing: Clear polycarbonate.b. Glazing: Matte polycarbonate.c. Glazing: Bronze polycarbonate.d. Glazing: Pebbled polycarbonate.e. Grilles: Long with square grilles, SQ24.f. Grilles: Plain Long, no grilles.

23. Windows: Provide optional Architectural Series ARCH1 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches (1067 mm x 406 mm) with a 159-1/2 inches (4051 mm) radius top.a. Glazing: 1/8 inch (3 mm) clear DSB glass.b. Glazing: 1/8 inch (3 mm) obscure DSB glass.c. Glazing: 1/2 inch (12 mm) insulated DSB glass.d. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.e. Glazing: 1/8 inch (3 mm) Frosted glass.f. Glazing: 1/2 inch (12 mm) insulated Frosted glass.g. Glazing: 1/8 inch (3 mm) Narrow Reed glass.h. Glazing: 1/2 inch (12 mm) insulated Narrow Reed glass.i. Grilles: Snap-in plastic grilles.j. Grilles: Vertical grilles.k. Grilles: Plain, no grilles.

24. Windows: Provide optional Architectural Series ARCH2 Windows; extruded cellular PVC windows measuring 42 inches x 16 inches (1067 mm x 406 mm) with a 39-3/4 inches (1001 mm) radius top.a. Grilles: Snap-in plastic grilles.b. Grilles: Vertical grilles.c. Grilles: Plain, no grilles.d. Glazing: 1/8 inch (3 mm) clear DSB glass.e. Glazing: 1/8 inch (3 mm) obscure DSB glass.f. Glazing: 1/2 inch (12 mm) insulated DSB glass.g. Glazing: 1/2 inch (12 mm) insulated obscure DSB glass.h. Glazing: 1/8 inch (3 mm) Frosted glass.i. Glazing: 1/2 inch (12 mm) insulated Frosted glass.j. Glazing: 1/8 inch (3 mm) Narrow Reed glass.k. Glazing: 1/2 inch (12 mm) insulated Narrow Reed glass.l. Glazing: Wrought Iron ARCH, acrylic.

25. Interior Finish: EPS Door- Stucco embossed texture with flush design, white interior color.

26. Interior Finish: Intellicore Door- Stucco embossed texture with shallow U ribbed pattern.

27. Exterior Finishes:a. Finish Type: Woodgrain embossed texture.b. Finish Type: Stucco embossed texture.c. Color: Standard White.d. Color: Almond.e. Color: Desert Tan.f. Color: Sandtone.g. Color: Chocolate.h. Color: Bronze.i. Color: Hunter Green.j. Color: Gray.k. Color: Glacier White.l. Color: Mocha Brownm. Color: Black.n. Color: Clopay Color Blast ____.

08 36 13 -32

28. Ultra-Grain Exterior Finish:a. Finish Type: Ultra-Grain Exterior Finish Woodgrain embossed texture to

simulate the look of stained wood.b. Finish Type: Ultra-Grain Exterior Finish Woodgrain embossed texture in one of

the following color options to simulate the look of stained wood.1) Finish: Ultra-Grain Cypress Medium Finish.2) Finish: Ultra-Grain Cypress Cherry Finish.3) Finish: Ultra-Grain Cypress Walnut Finish.

29. Locking: Standard, keyed spring-loaded lock bar.30. Locking: Provide optional keyed spring-loaded snap latches.31. Locking: Provide optional non-keyed interior slide bolt.32. Weatherstripping: Standard, Provide U shaped bottom seal.33. Perimeter Seals: _____.34. Tracks: Vertical tracks minimum 0.040 inch (1.02 mm) galvanized steel tapered and


PART 3 EXECUTION

3.1 EXAMINATION AND PREPARATION

A. Inspect and prepare substrates and openings for compliance with anchorage requirements using the methods recommended by the manufacturer for achieving best result for the substrates and openings under project conditions. Examine wall and overhead areas, including opening framing and blocking, with installer present, for compliance with requirements for installation tolerances, clearances, and other conditions affecting performance of Work in this Section.

B. Do not proceed with installation until substrates and opening have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances and conditions that will be detrimental to the installation are corrected. Commencement of installation constitutes acceptance of conditions.

C. If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.

3.2 INSTALLATION

A. Install products in accordance with approved shop drawings and the manufacturer's printed instructions. Install in proper relationship with adjacent construction. Test for proper operation and repeat until satisfactory results are obtained.

3.3 PROTECTION

A. Protect installed products until completion of project.

08 36 13 -33

B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

08 36 13 -34

Documents

ARCAT | Free Building Product CAD Details, BIM, Specs ... · Web viewSections: Composite overlays adhered to base door constructed of steel frame and skin construction with 1-5/8