Aramco Services Company (ASC) 2015 1

Material Sourcing List

Region 2: USA and Canada

2

Item Category Material Description Material Long DescriptionMaterial Number

9COM/9CAT

1Chemicals

(Drilling Fluids )

RESINATED LIGNITE STABLE TO

204 deg C

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; DRY

POWDER FORM,MODIFIED RESINATED LIGNITE DARK BROWN POWDER,FOR

WATER SOLUBLE FILTRATE REDUCER FOR FLUID LOSS CONTROL AND RHEOLOGY

STABILIZER IN HIGH TEMP WATER BASED MUD WELLS,25 KG OR 55 LB BAG,SG:

1.32-1.35, COMPATIBLE USE WITH LIGNOSULFONATE AND LIGNITES,

MAGNESIUM AND CHLORIDE, NORMAL TREATMENT:2-6 LB/BBL FOR FLUID LOSS

CONTROL AT TEMPERATURE APPROACHING 400 DEG F (204 DEG C),THE

SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING

MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG

(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER

(INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE

INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER

LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A

MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT

PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR

PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE

AND WATER PROOF.

1000021675

2Chemicals

(Drilling Fluids )AMINE CORROSION INHIBITOR

INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; 55 GAL DRUM,A BLEND OF

AMINES AND IMADAZOLINES FUNCTION GROUPS, OIL SOLUBLE /WATER

DISPERSIBLE CORROSION INHIBITOR, AMINE BASEDAMINE BASED,

RECOMMENDED FOR USE IN HIGH TEMPERATURE, HIGH PRESSURE

ENVIRONMENTS UP TO 350-400 DEG F PROVIDES EXCELLENT CORROSION

PROTECTION IN SOUR H2S, OR SWEET CO2 OIL AND GAS WELLS. DISPERSIBLE IN

FRESH, BRACKISH OR BRINE WATER. PACKER FLUID AND CORROSION INHIBITOR.

1000022135

Aramco Services Company (ASC)MS 549, 9009 West Loop South, Houston, Texas 77096, USA

Tel: +1 (713) 432-5555

Fax: +1 (713) 432-4716

Supplier Relations Management

Email: [email protected]

Website: http://www.aramcoservices.com

2015 1Saudi Aramco: Company General Use




9COM/9CAT

3Chemicals

(Drilling Fluids )LOW TOXICITY BASED OIL

KEROSENE, LOW TOXICITY, ODORLESS ADDITIVE DRILLING FLUID; CLEAR LIQUID,

FREE FROM SUSPENDED MATTER FORM,KEROSENE, LOW TOXICITY, ODORLESS

BASE OIL ADDITIVE,FOR AA OIL-BASED DRILLING FLUIDS,LOW AROMATIC

OIL,BULK DELIVERY,LOW TOXICITY OIL COMPATIBLE WITH ALL OIL-BASED

DRILLING FLUIDS ADDITIVES (EMULSIFIERS, ORGANOPHILIC CLAYS, AND FILTRATE

CONTROL AGENTS) SPECIFIC GRAVITY @ 15 DEG C .77- 79 (ASTM D 1298), FLASH

POINT: MORE THAN 185 DEG F (85 DEG C) (ASTM D 93), ANILINE POINT: MORE

THAN 167 DEG F (75 DEG C) (ASTM D 611), TOTAL AROMATICS: LESS THAN . 5%

VOL (ASTM D 1319), OLEFINS CONTENT: NIL PPM, BENZENE CONTENT: NIL PPM,

POLYNUCLEAR AROMATIC: NIL PPM, LC50: MORE THAN 100000 PPM. (MYSID

SHRIMP NINETY-SIX HOUR BIOASSAY TEST).

1000022138

4Chemicals

(Drilling Fluids)

LUBRICANT - HIGH PH AND

DIVALENT BRINES

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,WATER SOLUBLE

LUBRICANT,FOR REDUCES TORQUE, DRAG AND FRICTION IN WATER BASED

DRILLING MUDS,ND OF SURFACTANT MIXTURES POLYOLS DESIGNED FOR USE AS

MIUM LUBRICANT COMPATIBLE IN HIGH SALINE FLUIDS INCLUDING SATURATED

NACL, KCL, NABR, K-FORMATE CALCIUM CHLORIDE FLUIDS WITHOUT GREASING

OUT AND/OR CHEESING. STABLE OVER WIDE RANGE OF TEMPERATURE UP TO

325 F DEG. THE NORMAL (PMCC).

1000757580

5Chemicals

(Drilling Fluids)

LUBRICANT SALT WATER MUD

AND BRINE

LUBRICANT; DRILLING MUD, ADDITIVE TYPE,AMBER LIQUID FORM,55

GAL/DRUM,LUBRICANT FOR SALT WATER BASED MUD AND BRINES, DISPERSED,

SEA WATER, SALT SATURATED, FORMATS, COMPLETION, WORKOVER FLUIDS.

USED WITH BRINES, ALSO, RECOMMENDED FOR DRILL-IN FLUIDS CONTAINING

HIGH AMOUNT OF SIZEABLE CALCIUM CARBONATE, SODIUM CHLORIDE OR

CALCIUM CHLORIDE.PHYSICAL STATE @ 20 C DEG: AMBER COLOR, FAINT ODOR,

POUR POINT IS -10 C DEG MAX, SP. GR. 1.002 G/CC, VISCOSITY @ 40 C DEG IS 120

MM2/S, FLASH POINT 230 C DEG, INSOLUBLE IN WATER, DOES NOT FORM

GREASING AND IT DOES NOT PHASE OUT. BOTTOM HOLE TEMP. LIMIT: 160 C

DEG(320 F), PH LIMIT MAX 10.5, REDIAGREEN EME SALT IS A MIXTURE OF FATTY

ACID, C1618 AND C18-UNSATURATED COMPOUNDS WITH 2,2,2-NITRILOTRI-

ETHANOL AND FATTY ACIDS, ESTERS WITH POLYOL. OTHER ASSOCIATED

ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY

AFFECTED FLUID PROPERTIES.

1000774613





9COM/9CAT

6Chemicals

(Drilling Fluids)

CALCIUM CARBONATE FLAKE

FINE

ADMIXTURE DRILLING MUD; FINE WHITE FLAKES FORM,SIZED CALCIUM

CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING

FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE

60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER

BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%

MIN.

1000813534

7Chemicals

(Drilling Fluids)


MEDIUM

ADMIXTURE DRILLING MUD; MEDIUM WHITE FLAKES FORM,SIZED CALCIUM




BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%

MIN.

1000813690

8Chemicals

(Drilling Fluids)


COARSE

ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM




BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99%

MIN.

1000813535

9Chemicals

(Drilling Fluids)

POLYSTYRENE COPOLYMER

BEADS

ADMIXTURE: DRILLING MUD; DRY, LUBRA-GLIDE BEADS; DIVINYL BENZENE

COPOLYMER; DRY, COARSE GRADE; FOR REDUCING TORQUE AND DRAG.

ADMIXTURE DRILLING MUD; DRY, COARSE FORM,AA POLYSTYRENE COPOLYMER

BEAD,FOR SOLID LUBRICANT, TO REDUCE TORQUE AND DRAG WHILE DRILLING.

CHEMICALLY INERT,22.7 KGS (55 LBS) /SACK,PARTICLE SIZE DISTRIBUTION RANGE:

100 TO 1000 MICRON. COMPRESSIVE STRENGTH: 16,000 PSI. SOFTENING

TEMPERATURE: > 260 C DEG.

1000720918





9COM/9CAT

10Chemicals

(Drilling Fluids)

GUAR GUM POWDER FORM 25

KG BAG

ADDITIVE DRILLING FLUID; CREAMY COLOURED POWDER FORM,PURE GUAR

GUM,FOR USED AS COMPETITIVE SUPPLEMENTARY VISCOSIFIER FOR QUICK

VISCOSITY SWEEPS BUILDER WHILE DRILLING SURFACE HOLES WITH WATER.,25

KG METAL BAGS,IT IS PARTICULARLY USEFUL FOR OFFSHORE DRILLING, AS IT CAN

BE ADDED DIRECTLY TO SEAWATER, , WHICH ELIMINATES THE NEED FOR LARGE

QUANTITIES OF FRESH WATER AS WELL AS THE TIME REQUIRED TO PREHYDRATE

BENTONITE. IT IS AN UNTREATED GUAR GUM AND IS NON-IONIC IN NATURE. IT

SHOWS EXCELLENT PERFORMANCE OVER A WIDE PH RANGE. IT'S

RECOMMENDED TO ADD BIOCIDE, IF GUAR GUM SOLUTION KEPT OVER A PERIOD

OF TIME. APPEARANCE: CREAMY COLOURED POWDER, ODOR: BEAN LIKE,

MOISTURE: 8.0% (MAXIMUM), PH: 8.0, ASH :1% (MAXIMUM), PARTICLE SIZE

THROUGH 200 MESH (75 MICRON): 95% (MINIMUM), BROOKFIELD VISCOSITY :

8000 CP (MINIMUM), (1% SOLUTION IN DISTILLED WATER AT 25 DEG. C, AFTER 24

HOURS (SPINDLE #4, 20 RPM), FANN VISCOSITY INITIAL 10 MINUTE: 42 CP

(MINIMUM), (2.00 GM / 350 MLS, IN SEA WATER, @ 511 SEC-1, F1 SPRING. SEA

WATER: 41.95 GM NACL IN 1000 MLS DISTILLED WATER.

1000824113

11Chemicals

(Drilling Fluids)CRUDE OIL EMULSION BRAKER

ADDITIVE DRILLING FLUID; LIQUID AQUEOUS SOLUTION FORM,MIXTURE OF

ORGANIC NOMINAL PIPE SIZE: 5-1/8 IN,FOR EMULSION BREAKER, BREAKS DOWN

CRUDE FOR THE SEPARATION OF BOTH OIL AND SOLIDS,ORGANIC,

BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS

SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:100 CST,FREEZE POINT: 26 DEG F,

SOLUBLE IN FRESH AND BRINE WATER, APPLIED BY BATCH OR DOWN HOLE

INJECTION METHODS.

1000813531

12Chemicals

(Drilling Fluids)CRUDE OIL VISCOSITY REDUCER

ADDITIVE DRILLING FLUID; LIQUID, AQUEOUS SOLUTION FORM,MIXTURE OF

ORGANIC COMPOUNDS AND ENZYMES,FOR VISCOSITY REDUCING AGENT,

RETURNS HEAVY HYDROCARBONS TO AN OIL PHASE,ORGANIC, BIODEGRADABLE,

CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-

1.4, PH:7-9, VISCOSITY:200 CST,FREEZE POINT: 27 DEG F, SOLUBLE IN FRESH &

BRINE WATER AND OIL SOLUBLE, APPLIED BY BATCH OR DOWN HOLE INJECTION

METHODS, ++DESIGNED FOR THE TREATMENT OF DIFFICULT PARAFFIN AND

ASPHALTENE PROBLEMS BREAK DOWN THE LONG CHAIN AND CYCLIC PARAFFIN'S

(ALONG WITH OTHER LONG CHAIN HYDROCARBONS SUCH AS ASPHALTENES)

ALLOWING THEM TO RETURN TO THE OIL PHASE PERMANENTLY.

1000813532





9COM/9CAT

13Chemicals

(Drilling Fluids)EC-101 cutting wash

ADDITIVE DRILLING FLUID; AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC

COMPOUNDS AND ENZYMES,FOR A NON-TOXIC ,NON- HAZARDOUS,NON-

FLAMMABLE NON-CORROSIVE,100% BIODEGRADABLE,WATER BASED PRODUCT

WHICH IS UTILIZED IN BUT NOT LIMITED TO THE FOLLOWING APPLICATION,DRILL

CUTTING DECONTAMINATION, TREATMENT AND DISPOSAL, HYDROCARBON

CONTAMINATED SOLIDS TREATMENT AND DE- OILING OPERATION ON ONSHORE

AND OFFSHORE OIL DRILLING RIGS,PRODUCTION PLLATFORMS AND VESSELS , OIL

SPILL CLEANUP OPERATION AND PROCESS PLANT CLEAN UP . THE PRODUCT

LEAVES NO PETROCHEMICAL DISTILLATES AFTER PROPER

TREATMENT,APPEARANCE: MEDIUM BLUE AQUEOUS SOLUTION, SPECIFIC

GRAVITY: 1.2 - 1.4 (WATER=1), PH: 7 - 9 POUR POINT : 26 DEG F FREEZE POINT: 26

░F SOLUBILITY : FRESH AND BRINE WATER,55-GAL DRUM.

1000820609

14Chemicals

(Drilling Fluids)ALL TEMP

ADDITIVE; DRILLING MUD TYPE,FOR USED AS HT THINNER IN WIDE RANGE OF

WATER-BASE.,SOLID - WHITE POWDER FORM,25.0 LB/BAG,USED AS HT THINNER

IN WIDE RANGE OF WATER-BASE. DOES NOT CONTAIN HEAVY METALS/CHROME

OR REQUIRE SODIUM HYDROXIDE FOR ACTIVATION AND STABLE UP TO

TEMPERATURE 400 F DEG(204 DEG). TREATMENT RANGE FROM 0.5 LB/BBL TO

3.0 LB/BBL, ODOURLESS, PH : 7-9 (1%AQ. SOLN.), SOLUBLE IN WATER, SHEAR

STRENGTH, LB/100 FT▓, 32 MAX PLASTIC VISCOSITY, CP, 32 MAX, YIELD POINT,

LB/100 FT▓, 32 MAX, 10 SECOND GEL, LB/100 FT▓, 12 MAX, 10 MINUTE GEL,

LB/100 FT▓, 38 MAX, 30 MINUTE FILTRATE, ML, 48 MAX.

1000823315

15Chemicals

(Drilling Fluids)CHEMTROL X

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR PROVIDES HPHT FILTRATION

CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE

MUD.,SOLID - TAN TO BLACK POWDER FORM,50.0 LB/BAG,BLEND OF

DERIVATIZED ACRYLIC COPOLYMER DEFLOCCULANT AND CAUSTICIZED LIGNITE

PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE

RANGE OF WATER-BASE MUD. INITIAL TREATMENTS OF 2.0 TO 6.0 LB/BBL.

NORMAL TREATMENT LEVELS ARE BASED ON TYPES OF WBM & NEEDED.

APPEARANCE : SOLID, TAN TO BLACK POWDER, ODOR: EARTHY, SPECIFIC

GRAVITY: 1.5 , PARTIALLY SOLUBLE IN WATER. SPECIFIC GRAVITY: 1.5 PH: 9-10

SOLUBILITY : PARTIALLY SOLUBLE IN WATER.

1000823317





9COM/9CAT

16Chemicals

(Drilling Fluids)KEM-SEAL PLUS

ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR HTHP FILTRATION CONTROL

ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS,SOLID - WHITE

POWDER FORM,25.0 LB/BAG,HTHP FILTRATION CONTROL ADDITIVE WORK WITH

ALL TYPES OF WATER BASED FLUIDS, TEMPERATURES UP TO 500 DEG. F.

TREATMENT RANGE VARIES BASED ON FILTRATE VALUE DESIRED AND WELL

TEMPERATURE, A REASONABLE RANGE WILL BE 1 TO 6 LB/BBL.IS, SHOULD BE

ADDED SLOWLY TO AVOID HIGH RAISE IN VISCOSITY. APPEARANCE : SOLID,

WHITE POWDER, ODOR:SLIGHT, SPECIFIC GRAVITY :1300 KG/M3 @ 16 DEG. C,

SOLUBILITY : SOLUBLE IN WATER, SALT/HARD WATER PERFORMANCE, FILTRATE,

ML: 17 MAX AGING PERFORMANCE, FILTRATE, ML: 19 MAX.

1000823318

17Chemicals

(Drilling Fluids)Temperature Stabilizer

ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND

TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200

LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN

THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN

GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE

TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL

TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :

1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20° C

1.05 - 1.15.

1000823316

18Chemicals

(Drilling Fluids)COASTAL SPOT

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF POLYALPHAOLEFIN ( PAO)

SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS,FOR

SPOTTING FLUID FOR FREEING STUCK PIPE,PAO BASED PRODUCT WITH

PATENTED ADDITIVES,275 GALLON IBC CONTAINER,ADDITIVE, DRILLING FLUID:

LIQUID, BLEND OF POLYALPHAOLEFIN (PAO) SYNTHETIC HYDROCARBON,

EMULSIFIERS, ACTIVATORS AND INITIATORS, SPOTTING FLUID FOR FREEING

STUCK PIPE, PAO BASED PRODUCT WITH PATENTED ADDITIVES, 275 GALLON IBC

CONTAINER,CLEAR YELLOW LIQUID: SG:0.95-1. 05: DISPERSIBLE IN WATER: POUR

POINT: -20 DEG F, FLASH POINT GREATER 300 DEG F: REPLACEMENT FOR DIESEL

AND MINERAL OIL BASED SPOTTING FLUIDS: DEHYDRATES AND CRACKS FILTER

CAKE TO ALLOW PENETRATION AROUND THE PIPE WITH PAO TO FREE STUCK

PIPE.

1000813125





9COM/9CAT

19Chemicals

(Drilling Fluids)SX PLUS, 160 MICRONS

ADDITIVE DRILLING FLUID; BLACK SOLID POWDER PARTICULATES OF SPECIFIC

SIZED GRINDS FORM,HEAT TREATED CARBON BASED MATERIAL,FOR USED FOR

SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,

SEALING OF DEPLETED ZONES, PREVENTION OF STUCK PIPES,GRAPHITE

PARTICLES 40 MESH TO GRATER THAN 200 MESH ( 425 TO > 75

MICRONS),ADDITIVE, DRILLING FLUID: BLACK SOLID POWDER PARTICULATES OF

SPECIFIC SIZED GRINDS, HEAT TREATED CARBON BASED MATERIAL, USED FOR

SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,

SEALING OF DEPLETED ZONES PREVENTION OF STUCK PIPES, GRAPH GREY TO

BLACK POWDER SG 1.5 FLASH POINT > 350 DEG (F): MELTING POINT > 500 DEG

(F): PARTICLE SIZE:D90-245, D50-160, D10-111 NEGLIGIBLE SOLUBILITY IN WATER

AND OIL: USED FOR SEALING POROUS SANDS AND OTHER FORMATION TO

REDUCE DIFFERENTIAL PRESSURE TRANSFER.

1000813126

20Chemicals

(Drilling Fluids)Cross-LINK LCM Retarder

ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,ADDITIVE RETARDER,FOR

CROSS-LINKING X-LINK POLYMER FOR MIXING VISCOUS PILLS FOR CURING FLUID

CIRCULATION LOSS DURING DRILLING OPERATION,CROSS LINKING MATERIAL FOR

X-LINK POLYMER,5 GALLONS PER CAN,SPECIFIC GRAVITY 1.323 @20 DEG C,

BOILING POINT 221 DEG F (105 DEG C), MOLECULAR WEIGHT 112.0, SOLUBLE IN

WATER SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT

PACKING MANUAL.

1000757568

21Chemicals

(Drilling Fluids)Cross-LINK LCM

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,LOST CIRCULATION

MATERIAL,ECTED BY TEMPERATURE AND EXTENDERS. ND OF HIGH MOLECULAR

RETARDERS LULOSE FIBERS AND PARTICLE SS-LINKING AGENTS, G. THE CROSS-

LINKING IS PERATURE TOLERANT GEL-LIKE FORM STIFF, DURABLE AND PAPER

BAG,INSOLUBLE IN WATER. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT

NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE

IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN SHALL BE PRINTED ON

THE CONTAINER. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG

(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER

(INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER 3RD PLY 80 LB MIN.

NATURAL KRAFT PAPER (EXTERIOR PLY).

1000757567





9COM/9CAT

22Chemicals

(Drilling Fluids)

BIG BAG BARITE TRANS 0.99 M3

ORANGE

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY;

ORANGE COLOR; (FOR BARYTES). CONTAINER; BARYTE TRANSPORT TYPE,0.99 M3

(35 CU FT),BODY AND CONE SECTION: M049 LID SECTION: M426 INLET AND

OUTLET SPOUT: M326 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED

LID MADE FROM WIO2 MATERIAL,ORANGE,BIG BAG SYSTEM COMPONENT, IBC

TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR

THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE

MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)

STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF

1000029881

23Chemicals

(Drilling Fluids)

BIG BAG BENTONITE TRANS 0.99

M3 BLUE

BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; BLUE

COLOR; (FOR BENTONITE). CONTAINER; BENTONITE TRANSPORT TYPE,0.99 M3

(35 CU FT),BODY AND CONE SECTION: M047 LID SECTION: M425 INLET AND

OUTLET SPOUT: M325 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED

LID MADE FROM WIO2 MATERIAL,BLUE,BIG BAG SYSTEM COMPONENT, IBC

TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR

THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE

MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)

STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,

CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF

1000029882

24Chemicals

(Drilling Fluids)BIG BAG, ZIP NYLON

BIG BAG SYSTEM COMPONENTS: ZIP TIES: NYLON; BIG BAG; TYPE 120-R. . TIE; ZIP

TYPE,NYLON,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD

TYPE "120-R".

1000029930

25Chemicals

(Drilling Fluids)BIG BAG, LIFTING

BIG BAG SYSTEM COMPONENTS: LIFTING RING: BIG BAG; TYPE 109.5. . RING; BIG

BAG LIFTING TYPE,BIG BAG SYSTEM COMPONENTS, IBC TRANSPORT CONTAINERS

LTD, TYPE 109.5.

1000029887





9COM/9CAT

26Chemicals

(Drilling Fluids)CLAY-SEAL

ADMIXTURE CEMENT; FOR CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE

SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING.,TYPE ADMIXTURE, CEMENT

HYDRO GUARD, CLAYSEAL,ETHOXYLATED POLYAMINE,5 GAL GALLON

PAIL,APPEARANCE: TRANSPARENT YELLOW LIQUID, ODOR: AMINE, SPECIFIC

GRAVITY: 1GM/CC, SOLUBILITY: SOLUBLE IN WATER. CLAYSEAL SHOULD BE

ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING

ALL BENTONITE ADDITIONS AND ADDING FLUID LOSS ADDITIVES.INITIAL

TREATMENTS IN NONDISPERSED SYSTEMS MAY CAUSE SLIGHT FLOCCULATION

AND MAY REQUIRE A THINNER. CLAYSEAL ADDITIONS WILL BE 4-8 LB/BBL AND

FOR BEST RESULTS A MINIMUM OF 4 LB/BBL OF CLAYSEAL┐ IS REQUIRED.

1000812301

27Chemicals

(Drilling Fluids)GLYCOL - GEM GP

ADMIXTURE DRILLING MUD; DARK BROWN LIQUID FORM,POLYALKYLENE GLYCOL

OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR

ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED TO IMPROVE LUBRICITY, SHALE

STABILITY AND REDUCE BIT BALLING. NORMAL TREATMENT,POLYALKYLENENE

GLYCOL,55 GALLON DRUM,CONCENTRATION IS 2-6% BY VOLUME IN A MUD

SYSTEM BUT OPTIMUM CONCENTRATION SHOULD BE IDENTIFIED ON A CASE BY

CASE BASIS. APPEARANCE YELLOW TO BROWN LIQUID, ODOR MILD, SPECIFIC

GRAVITY 1.01, BOILING POINT (░C) 126 C, SOLUBILITY IN WATER MISCIBLE.


MANUAL.

1000812016

28Chemicals

(Drilling Fluids)BORE-HIB

ADDITIVE DRILLING FLUID; DARK YELLOW LIQUID FORM,GLYCERINE AND SILICATE

SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL

AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED AS STABILIZER WHILE

DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN BE DEPLETED

WHEN DRILLING ANHYDRITE, GREEN. CEMEN,GLYCERINE AND SILICATE SALT

MIXTURE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: DARK YELLOW LIQUID,

GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE

HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES USED

AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB

CAN. APPEARANCE DARK YELLOW SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL.

1000812015





9COM/9CAT

29Chemicals

(Drilling Fluids)LC-LUBE, 300-450 MICRON

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS

PARTICULATES FORM,PHITE H RESILIENCY SYNTHETIC,FOR WELLBORE

STRENGTHENING. DEPLETED D IN OIL OR WATER BASE MUD ES, PREVENTION OF

STUCKPIPE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST

NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER. ODOR: ODORLESS. SG: 1.75-

2.5 GM/CC. SOLUBILITY: INSOLUBLE IN WATER & ACID. PARTICLE SIZE: D50: 300-

450 MICRON. RESILIENCY: GREATER THAN 80% AT 10,000 PSI. CONTAINER IS A

MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND

PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT

PAPER (EXTERIOR PLY).

1000758660

30Chemicals

(Drilling Fluids)LC-LUBE Fine, 165 MICRON

ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS TICULATES

FORM,LC-LUBE FINE, GRAPHITE, SYNTHETIC,FOR USE FOR SEEPAGE CONTROL

BRIDGING, PLUGGING, OIL MUDS, WATER MUDS, LUBRICITY, SEALING OF

DEPLETED ZONES, PREVENTION OF STUCK PIPE,LC-LUBE FINE SYNTHETIC

GRAPHITE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST

NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER ODOR: ODORLESS SP. GR.:

2.25 GM/CC FREEZING POINT: NA MELTING POINT: >5000 F DEG SOLUBILITY:

INSOLUBLE IN WATER & ACID PARTICLE SIZE: D90 300 D50 165 D10 75

CONTAINER IS A MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER

(INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB

MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).

1000758661

31Chemicals

(Drilling Fluids)MAX-SHIELD

ADMIXTURE DRILLING MUD; MILKY, WHITE LIQUID FORM,MAX-SHIELD LATEX, 60

WT%,FOR SEALING POLYMER IN WATER-BASED DRILLING FLUID SYSTEM,LATEX,

60 WT%,55 GAL/DRUM,USED TO CREATE A SEMI-PERMEABLE MEMBRANE AT

BOREHOLE, IMPROVE HOLE STABILITY AND REDUCE PORE PRESSURE

TRANSMISSION WHICH HELPS PREVENT STUCK PIPE WHEN DRILLING DEPLETED

ZONES. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL

AND/OR ADVERSELY AFFECT FLUID PROPERTIES. NORMAL TREATMENT: 2-5 % BY

VOLUME. APPEARANCE: MILKY, WHITE LIQUID. ODOR: MILD PH: 6-9 SP. GR.: 1.05

GM/CC FREEZING POINT: 32 F DEG (0 C DEG) BOILING POINT: 212 F DEG (100 C

DEG) FLASH POINT: NA RELATIVE DENSITY: 1025 KG/M3 @ 16 C DEG. SOLUBILITY:

MISCIBLE WITH WATER VOC WEIGHT: <0.6%.

1000758663





9COM/9CAT

32Chemicals

(Drilling Fluids)STEEL SEAL

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS

CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND FRACTURED

FORMATIONS,BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB

BAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS

LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST

CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 50-100

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 3-10 LB/BBL FOR LUBRICITY

IN WATER BASED FLUIDS. ODORLESS, SG 1.75, FLASH POINT >356OC,INSOLUBLE

IN WATER, PARTICLES SIZE PERCENT < 40 MESH: 100 PERCENT > 200 MESH: 95

CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,

MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.

THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE

AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND

PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN.

1000775555

33Chemicals

(Drilling Fluids)STEEL SEAL Fine

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS

CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-FRACTURED

FORMATIONS,GRAY-BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB

SACK,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS

LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST

CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 60-110

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 4-10 LB/BBL FOR LUBRICITY

IN WATER BASED FLUIDS. ODORLESS, SG 1.75,FLASH POINT >356OC,INSOLUBLE

IN WATER, PARTICLES SIZE DRY SIEVE ANALYSIS:FINE 99% MIN & REGULAR 95%

MIN. THROUGH (30 MESH) DRY SIEVE ANALYSIS:FINE 40% MIN & REGULAR 2%

MAX THROUGH (200 MESH) MEDIAN PARTICLE SIZE: 80 CONTAINER MUST BE

PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,

LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -

75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.

NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR

PLY) SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS

NEEDED.

1000775556





9COM/9CAT

34Chemicals

(Drilling Fluids)STEEL SEAL 50

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SYNTHETIC GRAPHITE,FOR

LOSS CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-

FRACTURED FORMATIONS,SYNTHETIC GRAPHITE,50 LB. BAG,FOR USE WITH

SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS LUBRICITY FOR WATER

BASED FLUIDS GREY-BLACK ANGULAR MATERIAL,ODORLESS, SG 1.75, INSOLUBLE

IN WATER, MEDIAN PARTICLE SIZE D-50: 50 15-25 LB/BBL AS A BACKGROUND

CONCENTRATION FOR SEEPAGE AND LOST CIRCULATION CONTROL. 60-110

LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONESOR ON BOTTOM PRIOR TO

TRIPS AND 4-10 LB/BBL FOR LUBRICITY IN WATER-BASED FLUIDS. CONTAINER

MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,

LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -

75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.

NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR

PLY)

1000775557

35Chemicals

(Drilling Fluids)CLAY-GRABBER

ADMIXTURE DRILLING MUD; LIQUID FORM,NON-IONIC LIQUID POLYMER,FOR

FLOCCULANT AND CLAY ENCAPSULATOR. IT STOPS SHALE DISPERSION AND HELPS

STABILIZE SHALES IN THE WELLBORE,HIGH MOLECULAR WEIGHT, NON-IONIC

LIQUID POLYMER,5 GAL PAIL,OPAQUE LIQUID, OFF-WHITE COLOR, PH:6.5-7.5,

CONCENTRATION 30-40 (1% ACTIVE POLYMER), SG 1.02 -1.06, STABILITY UP TO

300 DEG F, IMIISCIBLE IN WATER FOR RESULTS CLAY GRABBER FLOCULANT

SHOULD BE MIXED THROUGH A HIGH SHEAR HOPPER. 0.5-1.0 LB/BBL IN THE

HYDRO-GUARD SYSTEM. 0.25-0.5 LB/BBL FOR CLEAR WATER DRILLING. 0.5-1.0

FOR TROUBLESOME SHALES IN A WATER- BASED SYSTEM.

1000775561

36Chemicals

(Drilling Fluids)CLAY-SYNC

ADMIXTURE DRILLING MUD; GRANULES FORM,NON-IONIC 100% ACTIVE DRY

POLYMER,FOR A CLAY INHIBITOR FOR WATER BASED DRILLING FLUIDS. SHALE

STABILIZER AND WELLBORE LUBRICATOR,LOW MOLECULAR WEIGHT, NON-IONIC

DRY POLYMER,50 LB. BAG,POLYMER ADHERES TO SURFACE OF REACTIVE CLAYS

PREVENTING DISPERSION AND HYDRATION, SHOULD BE MIXED THROUGH THE

HOPPER IN THE HYDRO-GUARD SYSTEM. IF SALINITY >140,000 PPM USE 2 LB/BBL,

IF SALINITY IS<140,000 PPM, USE 3 LB/BBL OFF-WHITE GRANULES, SOLID,

ODORLESS , PH (1% SOLUTION): 6.5-7.5 , SG 1.04, 100 (%ACTIVE POLYMER), BULK

DENSITY 50 LB/FT3 @ 20OC, SOLUBLE IN WATER SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

1000775562





9COM/9CAT

37Chemicals

(Drilling Fluids)MICROWASH - OHR-759

ADMIXTURE DRILLING MUD; LIQUID FORM,N-BUTANOL,FOR USED AS A CO-

SURFACTANT TO REMEDIATE WELLBORE DAMAGE,SURFACTANT BLEND WITH N-

BUTANOL 100%,55 GALLON DRUM,APPEARANCE CLEAR, COLORLESS

LIQUID,ODOR SWEET, RELATIVE DENSITY:810 KG/M3 BOILING POINT:118 DEG

C,FLASH POINT:37 DEG C, SOLUBLE IN WATER,AUTO-IGNITION TEMPERATURE

343░C. ++THIS ITEM IS ONE OF COMPONENT USED TO FORMULATE THE MICRO-

WASH SYSTEM FOR WELLBORE REMEDIATION AND REMOVE DAMAGE TO THE

RESERVOIR DRILLED WITH INVERT EMULSION FLUIDS. ++ CONTAINER MUST BE


LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S

PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.

MICRO-WASH ACID SYSTEM CONSISTS BAKER ++ HUGHES PRODUCTS, PRIME-743,

PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC

ACID AND FORMIC ACID.

1000811421

38Chemicals

(Drilling Fluids)MICROWASH - OHR-AC

ADMIXTURE DRILLING MUD; LIQUID FORM,ACID CORROSION INHIBITOR,FOR

USED AS AN ACID CONTROL ADDITIVE IN THE MICRO-WASH ACID

SYSTEM,,CONTAINING PROPARGYL ALCOHOL 5-10%,METHANOL 30-60% AND

BLEND OF NON-IONIC SURFACTANTS,55 GALLON DRUM,APPEARANCE:CLEAR

AMBER LIQUID,ODOR:SWEET,SPECIFIC GRAVITY:885-897 KG/M3,FLASH POINT:10-

15.6 DEG C, POUR POINT:LESS THAN -20.2 DEG C,SOLUBLE IN WATER, PH:4-6(5%

IN 25% IPA/75% WATER),FLASH POINT:10-15.6 DEG C (TAG CLOSED CUP),VAPOUR

PRESSURE:85MM HG AT 21 DEG C, ++ THIS ITEM PROVIDES CORROSION

RESISTANCE WHILE REMEDIATING WELLBORE DAMAGE AND DESTROYING OIL-

MUD FILTER CAKE, THE PRODUCT IS BIODEGRADABLE, ACID DISPERSIBILE AND IS

TOLERANT FOR SALTS PRESENT IN ACIDS.CONTAINER MUST BE PROPERLY

LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL

CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID

SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-

770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC

ACID.

1000811422





9COM/9CAT

39Chemicals


ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC

SURFACTANTS.FOR TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER

CAKE AND SOILDS,SODIUM TRIDECYL ETHER SULFATE 10-20% & OTHER

COMPONENTS,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID,

BLEND OF NON-IONIC AND ANIONIC SURFACTANTS., TO DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS, SODIUM TRIDECYL

ETHER SULFATE 10- 20% & OTHER COMPONENTS, 275 GALLON IBC CONTAINER,

APPEARANCE:TRANSPARENT, YELLOW LIQUID, ODOR:DISINFECTANT,SPECIFIC

GRAVITY: 1086.5 KG/M3,. FLASH POINT >100░C SOLUBLE IN WATER, PH: 7.8 AT

25 DEG C, VISCOSITY: 28. 0CST AT 40░C.THIS MATERIAL IS USED AS ONE OF

SURFACTANT COMPONENT IN THE MICRO-WASH ACID SYSTEM IT IS BLENDED OF

NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL.

CONTAINER MUST BE PROPERLY LABELED WITH:VENDOR'S NAME

MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.

SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING

AS NEEDED. MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS:

PRIME-743, PRIME-760, PRIME-770 ,OHR- 759, OHR-AC, OHR-757, OHR- 750 &

GLACIAL ACETIC ACID AND FORMIC ACID.

1000811423





9COM/9CAT

40Chemicals



SURFACTANTS,FOR TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL

SURFACES,ALKYPHENYL OXIDE SULPHONATES,275 GALLON IBC

CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND

ANIONIC URFACTANTS, TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT

EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES,

ALKYPHENYL OXIDE SULPHONATES , 275 GALLON IBC CONTAINER ,

APPEARANCE:CLEAR ,YLLOW- ORANGE LIQUID, ODOR:DISINFECTANT SPECIFIC

GRAVITY:1108 KG/M3,. BOILING POINT:212?F , FLASH POINT >100░C, SOLUBLE IN

WATER : PH:5.5 AT 25?C, VISCOSITY:69CST AT 40░C PROPRIETARY BLEND THAT IS

CUSTOM DESIGNED TO DISPERSE FILTER CAKE AS A COMPONENT IN MICRO-

WASH ACID SYSTEM TO REMOVE OBM SKIN DAMAGE AND ALLOW THE

RESERVOIR TO FLOW AT MAXIMUM POTENTIAL. IT IS BLEND OF NON-IONIC AND

ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL TENSION. NORMAL

TREATMENT: 10 - 25% BY VOLUME ++ CONTAINER MUST BE PROPERLY LABELED

WITH: VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION

DATE AND BATCH NUMBER.

1000811424

41Chemicals

(Drilling Fluids)MICROWASH - PRIME-743

ADMIXTURE DRILLING MUD; LIQUID FORM,GLYCEROL-BELEND OF NON-IONIC

SURFACTANTS,FOR USED FOR REMOVE OIL-WET SOLIDS FROM THE WELLBORE

AND WATER-WET METAL SURFACES.,GLYCEROL, BLEND OF NON-IONIC AND

ANIONIC SURFACTANTS,5 GALLON CAN,++ APPEARANCE OPAQUE YELLOW-

ORANGE LIQUID, PH 7.6, SPECIFIC GRAVITY 1015 KG/M3, BOILING POINT 100

DEG, FLASH POINT GREATER THAN 93 DEG C, WATER SOLUBLE ++ FULLY

COMPATIBLE AT ALLRATIOS WITH OIL MUD SPACERS AND OIL-NORMAL ONE OF

THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++

CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,

MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER


AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++MICRO-WASH ACID

SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-

770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC

ACID.

1000811425





9COM/9CAT

42Chemicals


ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND

SURFACTANTS,FOR USED TO CREATE AN EFFECTIVE PUSH PILL TO PILOT THE

DISPLACEMENT AND ACT AS NON EMULSIFIER,2-BUTOXYETHANOL > 60% AND A

BLEND OF UNSATURATED AROMATIC HYDROCARBONS, NON-IONIC SURFACTANT

AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE CLEAR,`LIGHT YELLOW

LIQUID, ODOR MILD, SWEET SPECIFIC GRAVITY:920 KG/M3 FLASH POINT

64░C(PMCC),PH 4.7-5.7(75%IPA/25% WATER), SOLUBLE IN WATER, VISCOSITY: 95-

105 CPS AT 20 DEG C ++ USED FOR REMOVING OIL-WET DEBRIS FROM THE

METAL SURFACES, FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS

AND ALL OIL- BASED DRILLING FLUIDS.ONE OF THE SURFACTANT COMPONENTS

IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED

WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE

AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER

SAMPLING AND TESTING AS NEEDED CONTAINER MUST BE PROPERLY LABELED ++

MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743,

PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC

ACID AND FORMIC ACID.

1000811426

43Chemicals



SURFACTANTS,FOR TO CREATE AN EFFECTIVE FOLLOW-UP DISPLACEMENT

NEWTONIAN CLEANING PILL USED TO REMOVE OIL-WET SOLIDS,BLEND OF NON-

IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE: TURBID,`

YELLOW-ORANGE LIQUID ODOR: MILD, SWEET SPECIFIC GRAVITY: 1098 KG/M3,

FLASH POINT: GREATER THAN 100 DEG C(TCC),WATER SOLUBLE ++ FULLY

COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED

DRILLING FLUIDS. ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH

ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S

NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH

NUMBER. ++ SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING

AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++ MICRO-

WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-

760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID

AND FORMIC ACID.

1000811427





9COM/9CAT

44Chemicals

(Drilling Fluids)ACETIC ACID > 96%

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,ACETIC ACID >

96%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE PARTICLES IN WELLBORE

REMEDIATION,ACETIC ACID > 96%,275 GALLON IBC TOTE,CLEAR LIQUID, STRONG

PUNGENT VINEGAR ODOR DENSITY 1050 KG/M3, BOILING POINT 117 DEG C,

FLASH POINT >102.2░C, SOLUBLE IN WATER,SOLUBLE AUTO-IGNITION

TEMPERATURE 799░C. ACETIC ACID IS A COMPONENT OF THE BAKER HUGES

MICRO- WASH SYTEM TO IMPROVE WELL PRODUCTIVITY. IT IS A CARBOXYLIC

ACIDS WITH THE MOLECULAR FORMULA OF CH3COOH, NORMAL TREATMENT 1 -

15 % BY VOLUME. 275 GALLON IBC.

1000814796

45Chemicals

(Drilling Fluids)FORMIC ACID >90%

ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,FORMIC ACID

>90%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,FORMIC

ACID >90%,55 GALLON DRUM,ADDITIVE DRILLING FLUID CLEAR,COLORLESS

LIQUID FORM,FORMIC ACID >90%,FOR TO ACIDIZE SOLUBLE CALCIUM

CARBONATE IN MICRO-WASH, FORMIC ACID >90%,55 GALLON DRUM,ADDITIVE,

DRILLING FLUID: CLEAR,COLORLESS LIQUID, FORMIC ACID >90%, TO ACIDIZE

SOLUBLE CALCIUM CARBONATE IN MICRO-WASH, FORMIC ACID >90%, 55

GALLON DRUM , ADDITIVE, DRILLING FLUID: CLEAR,COLORLESS LIQUID,FORMIC

ACID >90%, TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,

FORMIC ACID >90%, 55 GALLON DRUM.

1000811877

46Chemicals

(Drilling Fluids)N-FLOW - LOSURF-259

ADDITIVE DRILLING FLUID; LIQUID FORM,ISOPROPANOL AND HEAVY AROMATIC

PETROLEUM NAPTHA,FOR BREAKS EMULSION IN OIL BASE MUD FILTER CAKE,

USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FILTER CAKE

REMOVAL,5 GALLON CAN,ADDITIVE, DRILLING FLUID: LIQUID, ISOPROPANOL AND

HEAVY AROMATIC PETROLEUM NAPTHA, BREAKS EMULSION IN OIL BASE MUD

FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325

TREATMENT FOR FILTER CAKE REMOVAL, ISOPROPANOL AND HEAVY AROMATIC

PETROLEUM NAPTHA, 5 GALLON CAN, APPEARANCE: CLEAR LIGHT AMBER,

ALCOHOL ODOR, SPECIFIC GRAVITY: 0.92 @ 20 DEG C BOILING POINT: 92 DEG C,

DISPERSES IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING

EMULSIONS, NORMAL USE CONCENTRATION: 0.1 - 2.0 % V/V. NONIONIC

NONEMULSIFIER BLEND, PRIMARILY DESIGNED FOR ACIDIZING LIMESTONE,

DOLOMITE AND SANDSTONE FORMATION & FRACTURE TREATMENT.

1000811529





9COM/9CAT

47Chemicals

(Drilling Fluids)Mutual Solvent - MUSOL

ADDITIVE DRILLING FLUID; LIQUID FORM,ETHYLENE GLYCOL MONOBUTYL ETHER

SOLVENT,FOR REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL

WETTING CONDITION OF THE FORM,ETHYLENE GLYCOL MONOBUTYL ETHER,55

GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, ETHYLENE GLYCOL

MONOBUTYL ETHER SOLVENT, USED WITH NONANIONIC SURFACTANT (LOSURF-

259) TO REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING

CONDITION OF THE FORM, ETHYLENE GLYCOL MONOBUTYL ETHER, 55 GALLON

DRUM , APPEARANCE: COLORLESS LIQUID, MILD ODOR, SPECIFIC GRAVITY: 0.9 @

20 DEG C BOILING POINT: 171 DEG C SOLUBLE IN WATER. ++ PREVENTS OIL WET

FINES FROM STABILIZING' EMULSIONS, NORMAL USE CONCENTRATION: 10 %

V/V. PRIMARILY USED DURING ACIDIZING OPERATIONS IN SILICATE FORMATION.

++ CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME,

MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER


AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID

PRODUCTS LOSURF-259, MUSOL, N-FLOW 325 & BDF-443.

1000811540

48Chemicals

(Drilling Fluids)N-FLOW 325

ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL DIFORMATE,FOR

RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE

AND REPAIR FILTER CAKE AND REPAIR MUD DAMAGE,DIETHYLENE GLYCOL

DIFORMATE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, DIETHYLENE

GLYCOL DIFORMATE , RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO

REMOVE FILTER CAKE AND REPAIR MUD DAMAGE, DIETHYLENE GLYCOL

DIFORMATE, 55 GALLON DRUM , APPEARANCE: LIGHT YELLOW LIQUID,ODOR:

CHARACTERISTIC, SPECIFIC GRAVITY 1.2 GM/CC, BOILING POINT:240 DEG C,

PH:2.8 SOLUBLE IN WATER ++ COMPATIBLE WITH OIL, FORMATION BRINE AND

DRILL- IN FLUID BASE OIL (DIESEL), THE CHEMICAL IS DISSOLVED IN THE CARRIER

BRINE, BECAUSE THE ACID LIBERATION ACTION IS SLOW. ACID WILL BE

GENERATED OVER THE SUBSEQUENT PERIOD OF TIME, NORMAL CO.

1000811647





9COM/9CAT

49Chemicals

(Drilling Fluids)N-FLOW - BDF-443

ADDITIVE DRILLING FLUID; LIQUID FORM,SURFACTANT,FOR VALUE EMULSIFIER,

CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID

CLEANING,BLEND OF PROPRIERATORY CHEMICALS,55 GALLON DRUM,ADDITIVE,

DRILLING FLUID: LIQUID, SURFACTANT, EMULSIFIER, CHANGES THE WETTABILITY

OF OIL MUD FILTER CAKE, FOR ACID CLEANING, BLEND OF PROPRIERATORY

CHEMICALS, 55 GALLON DRUM , APPEARANCE: MILKY TO PALE YELLOW LIQUID,

ODOR: MILD SWEET, SPECIFIC GRAVITY 1.04 GM CC, BOILING POINT: 240 DEG C,

PH 5 - 7.5 (2.5 %), FLASH POINT: GREATER THAN 100 DEG C, SOLUBLE IN WATER

++ IS WATER WET SURFACTANT DISSOLVED IN THE CARRIER BRINE ALONG WITH

N-FLOW. IT CHANGES THE WETTABILITY OF OIL MUD FILTER CA.

1000812034

50Chemicals

(Drilling Fluids )

NONTREATED SODIUM

BENTONITE 1000KG Bag

ADMIXTURE, DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE

DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM

MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-

BASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT

CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,RE-USABLE SUPER SACK,API

13A AND API 13 I (LATEST EDITION),THE ORIGINAL MANUFACTURER, PRODUCT

NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION

DATE, STOCK NUMBER SHOULD BE PROVIDED BY THE MANUFACTURER. RE-

USABLE SUPER SACK CONTAINER SHOULD BE SEALED, MULTI-LINED AND MADE

OF WATERPROOF MATERIAL. OTHER ASSOCIATED ELEMENTS IN THE

COMPOSITION MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY

AFFECT FLUID PROPERTIES. PROPER TUBE SAMPLING AND QUARTERING TO BE

CARRIED OUT BY TRAINED AND EXPERIENCED PERSONNEL.

1000021552





9COM/9CAT

51Chemicals

(Drilling Fluids )SODIUM CHLORIDE (NACI 99%)

ADMIXTURE: DRILLING MUD; SODIUMCHLORIDEADMIXTURE DRILLING MUD;

DRY, FREE FLOWING COLORLESS/ WHITEGRANULES OR CRYSTALS, MAIN

COMPONENT FORM,SODIUM CHLORIDE(NACI),FOR A WATER SOLUBLE

WEIGHTING AGENT FOR FORMULATINGSOLIDS FREE COMPLETION BRINES. TO

FORMULATE CLEAR SOLUTIONWITHOUT SUSPENDED MATTERS. ALSO, SALT

SATURATED DRILLING FLUIDSARE USED FOR DRILLING EVAPORITE SALT

SECTIONS.,SODIUMCHLORIDE,1000 KG OR 2200 LB BAG,FREE FLOWING, 0.04 MM-

0.4 MMGRAIN, SIZE NON-BREATHABLE FABRIC BAG W/ DISPOSABLE

LIFTINGSTRAP, STACKABLE W/O PALLET & WITHOUT BOTTOM SPOUT, MIN

TENSILESTRENGTH FACTOR 5 NORMAL HANDLING, SLNN-99SS MOISTURE-PROOF

BIGBAGS W/LIFTING STRAPS, CONTAINER PROPERLY LABELED, W/

VENDOR'SNAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE

ANDBATCH NO, NO PARTICLES GREATER THAN 5MM IN ANY DIMENSION.THE

DISPOSABLESUPER SACKS SHOULD HAVE AT# LEAST 75% OF THEIR SHELF

LIFEREMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE TO#

THEWARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED

ATDESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.# REFER TO

SAPNUMBER: 1000840600 FOR # DISPOSABLE SUPER SACKS SPECIFICATION.

1000021741

52Chemicals

(Drilling Fluids )CEMENT CLASS "G", Bulk

ADDITIVE: CEMENT; BULK DELIVERY IN TN. CEMENT; OIL WELL TYPE,BULK

TONS,API SPEC 10 CL G TYPE HSR,HIGH SULPHATE-RESISTANT. PRODUCT

MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF

ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL

MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF

MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE

CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.

1000022631

53Chemicals

(Drilling Fluids)

POTASSIUM FORMATE (75% SOL,

WATER 25%)

ADMIXTURE DRILLING MUD; LIQUID FORM,POTASSIUM FORMATE SOLUTION

(KCOOH & H20),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN

THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM FORMATE 75% AND

WATER 25% SOLUTION, CLEAR LIQUID, DENSITY 1570 KG/M3 @ 20 DEG C, PH

10.0 @ 25 DEG C,1000 LITER (1570 KG) IBC OR TOTE CONTAINER (CO),IRON LESS

THAN 10 PPM, CHLORIDE CONTENT LESS THAN 40 PPM, TURBIDITY MAX 10 NTU,

SOLUBLE IN ALL PROPORTIONS IN WATER EXPORT PACKING MANUAL.

1000774250





9COM/9CAT

54Chemicals

(Drilling Fluids)

POTASSIUM FORMATE CRYSTALS

(97% KCOOH)

ADMIXTURE DRILLING MUD; FREE FLOWING SOLID CRYSTALS FORM,POTASSIUM

FORMATE 97% WEIGHT (KCOOH),FOR FORMULATING SOLIDS FREE WORKOVER

FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM

FORMATE 97% WEIGHT & CONDITIONING AGENT 3% WEIGHT, POWDER, WHITE

COLOR, BULK DENSITY 1080 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY

(POWDER ONLY) 1.91, SOLUBILITY IN WATER 355 GR/100 ML @ 20 DEG C ,

MELTING POINT 169 DEG C TEMPERATURE STABILITY UP TO 400 ░F (204 ░C),


MANUAL.

1000774251

55Chemicals

(Drilling Fluids)

SODIUM FORMATE POWDER

(98% NACOOH)

ADMIXTURE DRILLING MUD; FREE FLOWING GRANULES FORM,SODIUM

FORMATE POWDER 98% (NACOOH),FOR FORMULATING SOLIDS FREE WORKOVER

FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,SODIUM FORMATE

98% WEIGHT & OTHER ORGANICS 2% WEIGHT, WHITE COLOR, BULK DENSITY 900-

950 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.92,

SOLUBILITY IN WATER 81GR/100 ML @ 20 DEG C , MELTING POINT 253 DEG C ,

TEMPERATURE STABILITY UP TO 400 ░F (204 ░C), SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCOEXPORT PACKING MANUAL.

1000774252





9COM/9CAT

56Chemicals

(Drilling Fluids )

MARBLE FINE, PURE CaCO3 -

2200 LB BAGS

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON

PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE

FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL

AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS,GROUND

MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE

CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY

LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION,

PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM

CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT

ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE

"MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV

STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE

STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL

HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI

ARABIAN CLIMATIC CONDITIONS.PRODUCT MANUFACTURER AND OR SUPPLIER

REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF

ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OF

THEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE

TO# THE WARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED AT

DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.

1000021813

57Chemicals

(Drilling Fluids)DETERGENT

AGENT: WELL STIMULANT; 20 LITER (5GAL.) CAN. . AGENT WELL STIMULANT; FOR

SURFACTANT & DETERGENT FOR DRILLING WATER & LOW SOLID MUD,LIQUID

FORM,20 L OR 5 GAL CAN.

1000021975





9COM/9CAT

58Chemicals

(Drilling Fluids )NON-IONIC POTATO STARCH

ADMIXTURE: DRILLING MUD; 25 KG BAG; POTATO STARCH STABLE AGAINST

BACTERIA ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COARSE

GRANULATED POWDER FORM,POTATO STARCH,FOR PROVIDES FILTRATE

CONTROL W/MINIMUM VISCOSITY BUILDUP. THE PRODUCT IS A NON-IONIC

POLYMER USED IN WATER- BASED FLUIDS WITH HIGH CONCENTRATIONS OF

MONOVALENT AND DIVALENT CATIONS OR COMBINATIONS OF ELECTROLYTES

AND IN CLAY-FREE, NON-DISPERSIVE SYSTEMS,POTATO STARCH,25 KG OR 50 LB

BAG,NO PARTICLES (RESIDUE) GREATER THAN 2000 MICROMETERS SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

MULTI-WALLED BAGS, SEALED WITH INNER POLYETHYLENE COATING, MAIN

COMPONENT PREGELATINZED, NON- FERMENTING POTATO CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50

LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL

KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED

AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF

POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1

MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL

KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT

TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.

1000022170

59Chemicals

(Drilling Fluids)NVIS HI - 50 LB

ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SILICATE,FOR VISCOSIFIER

USED IN MILLING CASING WINDOWS,CALCIUM ALUMINOSILICATE,50 LB SEALED

MULTI-WALL PAPER BAG,GRAY COLOR, SPECIFIC GRAVITY 0.6@ 20 DEG C, PH 11,

INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,

PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,

EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG FOLLOWS: (CONTAINER) SHALL BE AS 1ST PLY 50 LB MIN. NATURAL

KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD

PLY SEPARATE INNER BAG LINER , HIGH DENSITY ORIENTED AND CROSS-

LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN

MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN.

1000757569





9COM/9CAT

60Chemicals

(Drilling Fluids)

HYDRATED CALCIUM SULFATE -

GYPSUM

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM SULFATE (GYPSUM)

ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE WHITISH POWDER

FORM,HYDRATED CALCIUM SULFATE,FOR A SOURCE OF CALCIUM IONS TO TREAT

CARBONATE CONTAMINATION IN HIGH PH MUDS, AND TO AVOID HOLE

ENLARGEMENT WHEN ANHYDRITE IS DRILLED,25 KG OR 55 LBS/SACK,SHIPMENT

OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL

MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S

NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH

NO.,SAUDI ARAMCO STOCK NUMBER AND SAUDI ARAMCO P.O. NUMBER NOTE:


AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY

75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR BF PLY) THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED,

PACKING SPEC CODES 8444-18 APPLIES.

1000021559

61Chemicals

(Drilling Fluids )GRAVEL PARTICLE 8.0-12 MM

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 8.0-12

MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON 9-

5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED

LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62,

INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM

LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING

10,000 MICRON AND 8,000 MICRON SIEVES THE GRAVEL RETAINED ON TOP OF

THE 8,000 MICRON SIEVE IS TO BE COLLECTED AND SACKED WHILE THE GRAVEL

RETAINED ON TOP OF THE 10,000 MICRON SIEVE SHOULD BE DISCARDED

AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING

AND TESTING, AS NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER

BAG(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT

PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB

MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER

POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY

SEALED.

1000775550





9COM/9CAT

62Chemicals

(Drilling Fluids )GRAVEL PARTICLE 18.0- 26.5 MM

ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 18.0 -

26.5 MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON

9-5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED

LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62,

INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM

LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING

MUST BE PREPARED BY USING FOUR SIEVES 26.5 MM, 22.4 MM, 20 MM, AND 18

MM. THE GRAVEL RETAINED ON TOP OF THE 22.4 MM,20 MM AND 18 MM

SIEVES SHOULD BE COLLECTED AND SACKED WHILE THE GRAVEL RETAINED ON

TOP OF THE 26.5 MM SIEVE SHOULD BE DISCARDED. AUTHORIZED SAUDI

ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS

NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG(CONTAINER)

SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR

PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL

KRAFT PAPER (EXTERIOR PLY).

1000775551

63Chemicals

(Drilling Fluids )

Calcium Carbonate 5, 5 MICRON -

50 LB

ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 5 MICRONS

FORM,CALCIUM CARBONATE,FOR BRIDGING AGENT FOR FLUID LOSS CONTROL,

INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS,SIZED CALCIUM

CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 5 MICRONS, SHIPMENT

OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.

THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH

NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED,

STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER

ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE

CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS

FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY -

75 BLMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER.

1000775558





9COM/9CAT

64Chemicals

(Drilling Fluids )

Calcium Carbonate 25, 25

MICRON - 50 LB




CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 25 MICRONS,


MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL,

BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF

REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE

CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE



75 LBMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER.

1000775559

65Chemicals

(Drilling Fluids )

Calcium Carbonate 50, 50

MICRON - 50 LB




CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 50 MICRONS,


MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL,

BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF

REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE

CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE



75 LBMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG

MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.

1000775560





9COM/9CAT

66Chemicals

(Drilling Fluids )BARITE (BASO4) - SUPER SACK

ADMIXTURE: DRILLING MUD GROUND BARITE (BARIUM SULFATE) ADMIXTURE

DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BARYTES (BASO4),FOR FOR

INCREASING DRILLING FLUIDS DENSITY UP TO 157 PCF (21 LB/GAL),BARIUM

SULFATE (BASO4) 90 % WT, MINIMUM SPECIFIC GRAVITY: 4.20 4.20 GM/CC,

MINIMUM,RE-USABLE SUPER SACK,API 13A, SECTION 2, API 13 I, SECTION 4 & 5

(MAY, 1993 OR LATEST), API 13K, SECTION 4 (MAY, 2000 OR LATEST),THE

ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF

PRODUCTION OF MATERIAL, EXPIRATION DATE , STOCK NUMBER SHOULD BE

PROVIDED BY THE MANUFACTURER. RE-USABLE SUPER SACK CONTAINER

SHOULD BE SEALED, MULTI-LINED AND MADE OF WATERPROOF MATERIAL.

OTHER ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE HARMFUL

TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. PROPER TUBE

SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED AND

EXPERIENCED PERSONNEL.

1000021550

67Chemicals

(Drilling Fluids)

SIZED CACO3 AND POLYMERS

LCM

ADMIXTURE DRILLING MUD; ADMIXTURE FORM,BLEND OF SIZED CACO3 AND

POLYMERS,FOR REDUCES FLUID INVASION WITHOUT DAMAGING THE

FORMATION BY SEALING GAUGE SCREEN FROM INTERNAL SIDE TO BE EASILY

REMOVED WITH PRODUCTION FLUID FLOW.,BLEND OF SIZED CACO3 AND

POLYMERS,BBL.

1000876985

68Chemicals

(Drilling Fluids)

Spacer-Tek - SBP-9125

SURFACTANT

AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE

OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD SURFACTANT WITH

LOWER HLB NUMBER FOR LOWER TEMPERATURE CLEANING APPLICATION

SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER,

SBP-101 SOLVENT, SBP,ETHOXYLATED ALCOHOL BASE,LIQUID

FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.92 PH:

7-8 PLASH POINT: 255 F.

1000877462

69Chemicals

(Drilling Fluids)


SURFACTANT


OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE

OF TEMPERATURES SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-

85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125

SURFACTANT SBP,BLEND OF NON-IONIC SURFACTANTS AND LINEAR ALCOHOL CO-

SOLVENT,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION

DENSITY: 1.002 PH: 7-8 PLASH POINT: > 200 F.

1000877461





9COM/9CAT

70Chemicals

(Drilling Fluids)Spacer-Tek - SBP-101 SOLVENT

AGENT WELL STIMULANT; FOR USED AS THE PRIMARY CLEANING PILL FOR

DISPLACEMENT CLEANUP OF SYNTHETIC AND OIL-BASED DRILLING MUD. THE

SOLVENT PRODUCT IS TYPICALLY MIXED WITH BRINE TO PROVIDE DISPERSED

MACRO DROPLETS OF SOLVENT IN BRINE AND ALSO A HIGHER SOLVENT PILL

DENSITY FOR SUPER,BLENDS OF SURFACTANTS AND SOLVENTS,LIQUID

FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.85-

0.87 PLASH POINT: 122 F.

1000877460

71Chemicals

(Drilling Fluids)Spacer-Tek - SBP-SPACER MIX

AGENT WELL STIMULANT; FOR TO DEVELOP THE VISCOSITY AND GELLING AND TO

BE EASILY HYDRATED EVEN UNDER A LIMITED MIXING CONDITION. ALSO, IT

ENHANCES THE HIGH TEMPERATURE VISCOSITY PERFORMANCE IN SOLID-FREE

POLYMER GEL. TYPICAL TREATMENT: 8-25 LB/BBL. SPACER-TEK SYSTEM CONSISTS

OF,PATENTED BLEND OF VISCOSIFIERS AND DISPERSANT,POWDER

FORM,BAG,APPEARANCE: BEIGE-COLORED P S.G.: 1.76.

1000877299

72Chemicals

(Drilling Fluids)Spacer-Tek - SBP-600 BIOCIDE

AGENT WELL STIMULANT; FOR TO CONTROL ALL FORMS OF BACTERIA WHICH IS

PARTICULARLY DETRIMENTAL IN FRESH AND BRINE-WATER DRILLING AND

PACKER FLUIDS TYPICAL TREATMENT: 5 GAL/100 BBL. SPACER-TEK SYSTEM

CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP

4620,BLENDED ORGANIC SULFUR ANTIMICROBIAL AGENT,POWDER

FORM,PAIL,APPEARANCE: WHITE CRYSTAL SPECIFIC GRAVITY: 0.96.

1000877298

73Chemicals

(Drilling Fluids)Spacer-Tek - SBP-85 GEL-E

AGENT WELL STIMULANT; FOR NON-DAMAGING VISCOSIFIER THAT READILY

DISPERSIBLE IN ALL BRINE SYSTEMS AND EASIER TO USE THAN DRY VISCOSIFIERS .

IT IS SOLUBLE IN HYDROCHLORIC, ACETIC AND FORMIC ACIDS AND DEGRADABLE

AT TEMPERATURES ABOVE 275°F,BLEND OF XANTHAN GUM/ORGANIC

SOLVENT,LIQUID FORM,PAIL,APPEARANCE: BEIGE COLORED SPECIFIC GRAVITY:

1.07 PH: 7 FLASH POINT: 160 F.

1000877297

74Chemicals

(Drilling Fluids)Spacer-Tek - SBP-24 DEFOAMER

AGENT WELL STIMULANT; FOR TO CONTROL FOAMING IN SPACER OR CLEANING

FLUID FORMULATIONS TYPICALLY TREATMENT: 100-500 PPM. SPACER-TEK

SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101

SOLVENT SBP-4620 SURFACTANT, SBP-9125 SURFACTANT, SBP-9755 SURFACTANT

SBP-600,SILICONE EMULSION BASE,LIQUID FORM,PAIL,APPEARANCE: WHITE

CREAMY SPECIFIC GRAVITY: 0.99 PH: 7-8.

1000877296





9COM/9CAT

75Chemicals

(Drilling Fluids)


SURFACTANT


OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE

OF TEMPERATURES. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER ,SBP-

85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125

SURFACTANTS,ALKYL POLYGLUCOSIDE BASE,LIQUID FORM,DRUM,APPEARANCE:

LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.1 PH: 7-8 PLASH POINT: 212 F.

1000877463

76Chemicals

(Drilling Fluids)

MODIFIED POLYMER FOR FLUID

LOSS

ADDITIVE DRILLING FLUID; POWDER FORM,BLEND OF MODIFIED POLYMERS,FOR

PROVIDES CENTRAL TO THE ULTRA-LOW INVASIVE FLUID AND GREATLY REDUCES

FLUID INVASION INTO MATRIX. TYPICAL TREATMENT: 3- 8 LB/BBL.,BLEND OF

MODIFIED POLYMERS,25 POUND MULTI-WALLED SACKS,APPEARANCE: POWDER

TO FLAKE. SPECIFIC GRAVITY: 1.0.

1000883084

77Chemicals

(Drilling Fluids)LUBRICANT OBM

ADDITIVE DRILLING FLUID; LIQUID FORM,MIXTURE OF FATTY ACIDS AND

SPECIALTIES,FOR DRILLING LUBE IS USED TO HELP IMPROVE LUBRICITY OF OIL-

BASED MUD SYSTEMS, THEREBY HELPING TO REDUCE TORQUE AND DRAG, AND

REDUCING RISK OF DIFFERENTIAL STICKING IN DEEP, TORTUOUS, HIGH ANGLE OR

EXTENDED REACH WELLS,MIXTURE,55-GALLON (208 LITRE) DRUM,APPEARANCE:

AMBER LIQUID. POUR.

1000885304

78Chemicals

(Drilling Fluids)THERMASET 100-2

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY

ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN

INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP

LOSTCIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING

LEAKS.,POLYESTER RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING

TEMPERATURE RANGE IS 212 °F - 302 °F FOR HIGH TEMPERATURE APPLICATIONS.

THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200,

NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER

AND GLASS FILLER.

1000888051

79Chemicals

(Drilling Fluids)THERMASET 55-4

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY

ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN

INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST

CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS.,POLYESTER

RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING TEMPERATURE

RANGE IS 140 °F - 275 °F FOR LOW TEMPERATURE APPLICATIONS. THERMASET

SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL

PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS

FILLER.

1000888052





9COM/9CAT

80Chemicals

(Drilling Fluids)THERMASET Glass Filler

ADDITIVE DRILLING FLUID; SOLID (PULVERIZED POWDER) FORM,GLASS

BEADS,FOR IT IS CHEMICALLY INERT WEIGHTING MATERIAL FOR LOW DENSITY

FLUIDS. IT IS USED IN THERMASET LCM SYSTEM. IT IS STABLE AT TEMPERATURES

UP TO 1112 °F.,GLASS BEADS,BAG,APPEARANCE: SOLID CLEAR AND ODORLESS.

SG1: 0.

1000888050

81Chemicals

(Drilling Fluids)THERMASET Aerosol/orisil 200

ADDITIVE DRILLING FLUID; SOLID FORM,SILICON DIOXIDE,FOR ESPECIAL

VISCOSIFIER FOR THERMASET LCM SYSTEM. IT CAN BE USED IN TEMPERATURE

RANGE OF 32 °F - 1112 °F.,SILICON DIOXIDE,BAG,APPEARANCE: SOLID ODORLESS.

SG: 2.2.

1000888053

82Chemicals

(Drilling Fluids)THERMASET CI-40

ADDITIVE DRILLING FLUID; LIQUID FORM,TERT-BUTYL PERBENZOATE,FOR CURING

AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR HIGH TEMPERATURE

APPLICATIONS (205 °F - 266 °F),TERTIARY-BUTYL

PEROXYBENZOATE,CAN,APPEARANCE: LIQUID. DENSITY: 1.

1000888054

83Chemicals

(Drilling Fluids)THERMASET CI-65

ADDITIVE DRILLING FLUID; LIQUID DISPERSION FORM,DIBENZOYL PEROXIDE,FOR

CURING AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR LOW

TEMPERATURE APPLICATIONS (32 °F – 205 °F),DIBENZOYL PEROXIDE/ C 9-11

BRANCHED ALKYLBENZOATE,CAN,APPEARANCE: LIQUID. COLOR: WHI.

1000888055

84Chemicals

(Drilling Fluids)THERMASET CLEANER

ADDITIVE DRILLING FLUID; LIQUID FORM,DIMETHYL SUCCINATE, DIMETHYL

GLUTARATE, DIMETHYL ADIPATE,FOR IT IS A CLEANING AGENT USED IN

THERMASET SYSTEM APPLICATIONS TO CLEAN OILY AREAS IN TANKS, PIPES,

ETC.,DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL

ADIPATE,IBC,APPEARANCE: LIQUID. COLOR: LIG.

1000888056

85Chemicals

(Drilling Fluids)DI-TROL

ADDITIVE DRILLING FLUID; SOLID FORM,SPECIAL BRANCHED CHAIN MODIFIED

STARCH DERIVATIVE,FOR PROVIDES BOTH VISCOSITY AND FLUID LOSS CONTROL

IN DIVALENT DRILLING FLUID SYSTEM MIXED IN CALCIUM CHLORIDE OR CALCIUM

BROMIDE BRINES IN MI-SWACO DI-PRO SYSTEM.,HIGH MOLECULAR WEIGHT,

BRANCHED-CHAIN STARCH DERIVATIVE,A 25 KG MULTI-WALLED SACK,TYPICAL

PHYSICAL AND CHEMICAL,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD

BE IN SACKS (1 SACK = 25 KGS). CONTAINER MUST BE PROPERLY LABELED WITH

VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND

BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND

TESTING AS NEEDED. NOTE: DI-TROL IS NOT COMPATIBLE FOR USE IN MONO-

VALENT BRINES.#IT WORKS SYNERGISTICALLY WITH OTHER COMPONENTS OF DI-

PRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND DI-BOOST (MM:

1000892844). IT WORKS SYNERGISTICALLY WITH DI-BALANCE TO ENHANCE THE

LSRV.

1000892845





9COM/9CAT

86Chemicals

(Drilling Fluids)DI-BALANCE

ADDITIVE DRILLING FLUID; SOLID FORM,FINE PARTICLE-SIZE MAGNESIUM

COMPOUND,FOR CONTROLS THE PH OF BRINE-BASED AQUEOUS DRILLING FLUID

SYSTEMS MIXED IN ZINC BROMIDE, CALCIUM CHLORIDE OR CALCIUM BROMIDE

IN MI-SWACO'S DI-PRO MUD SYSTEM.,MINIMUM PERCENTAGE AS MGO: 98,A 25

KG MULTI-WALLED SACK,PHYSICAL PROPERTIES: APPEARANC,ORDER UNIT OF

MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).

1000892842

87Chemicals

(Drilling Fluids)DI-BOOST

ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL,FOR A VISCOSITY

ENHANCER AND STABILIZER IN DI-VALENT DRLG FLUID SYSTEMS MIXED IN

CALCIUM CHLORIDE OR CALCIUM BROMIDE BRINES IN MI-SWACO DI-PRO

SYSTEM. IT REDUCES DI-PRO SYSTEM VISCOSITY IF CONCENTRATION EXCEEDS 1.0

% BY VOLUME.,DIETHYLENE GLYCOL: 100% PURITY,7.6 LITERS CAN,PHYSICAL AND

CHEMICAL PROPERTI,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE

IN CANS (1 CAN = 7.6 LITERS). CONTAINER MUST BE PROPERLY LABELED WITH

VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND

BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND

TESTING AS NEEDED. NOTE: DI-BOOST WORKS SYNERGISTICALLY WITH OTHER

COMPONENTS OF DI-PRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND

DI-TROL (MM: 1000892845).

1000892844

88Chemicals

(Drilling Fluids)

LE SPERMUL - OBM emulsion

control

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER FOR INVERT EMULSION

MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A

LIQUID PRIMARY EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OIL-

OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,

INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY

EMULSIFIER MIXTURE,DRUM,APPEARANCE: CLEAR AMBER VISCOU,REQUIRED

QTY: 55 GAL PER DRUM.

1000904194

89Chemicals

(Drilling Fluids)FACTANT - OBM emulsifer

ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER AND WETTING AGENT FOR

INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE

OBM SYSTEM. A LIQUID EMULSIFIER AND OIL-WETTING AGENT FOR USE IN

MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS

OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A

PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: DARK VISCOUS

LIQUI,REQUIRED QTY: 55 GAL PER DRUM.

1000904195





9COM/9CAT

90Chemicals

(Drilling Fluids)BHD-513 - OBM filtrate control

ADDITIVE DRILLING FLUID; SOLID FORM,CROSS-LINKED POLYMER SOLID,FOR THIS

IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A CROSS-LINKED

POLYMER SOLID THAT PROVIDES FILTRATION CONTROL FOR USE IN MINERAL OIL-

OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,

INTEGRADE OR ENCORE OF HALLIBURTON BARO,A CROSS-LINK POLYMER

SOLID,BAG,APPEARANCE: SOLID. SPECIFIC GR,REQUIRED QTY: 25 KG PER BAG.

1000904196

91Chemicals

(Drilling Fluids)BDF-489 - OBM viscofifier

ADDITIVE DRILLING FLUID; SOLID FORM,ORGANIC BASED VISCOSIFER,FOR THIS IS

PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. AN ORGANIC BASED

RHEOLOGY MODIFIER FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-

BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF

HALLIBURTON BAROID.,ORGANIC BASED VISCOSIFIER,25 KG BAG,APPEARANCE:

SOLID WHITE. MELTING POINT: 55,REQUIRED QTY: 25 KG PER BAG.

1000904197

92Chemicals

(Drilling Fluids)ADAPTA - OBM filtrate control

ADDITIVE DRILLING FLUID; SOLID FORM,METHYLSTYRENE ACRYLATE

COPOLYMER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM.

PRIMARY FILTRATION CONTROL AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL

OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE

OR ENCORE OF HALLIBURTON BAROID.,METHYLSTYRENE ACRYLATE

COPOLYMER,25 KG BAG,APPEARANCE: SOLID WHITE. SPECIFIC GRAVITY

:,REQUIRED QTY: 25 KG PER BAG.

1000904198

93Chemicals

(Drilling Fluids)RHEOMOD-L- OBM viscosifer

ADDITIVE DRILLING FLUID; LIQUID FORM,MODIFIED TRIMER FATTY ACID,FOR THIS

IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. LIQUID POLYMERIC

VISCOSIFIER AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-

BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF

HALLIBURTON BAROID.,MODIFIED TRIMER FATTY ACID,55 GAL

DRUM,APPEARANCE: LIQUID DARK. SPECIFIC GRAVITY : 0,REQUIRED QTY: 55 GAL

PER DRUM.

1000904199

94Chemicals

(Drilling Fluids)TAU-MUD - OBM viscofifier

ADDITIVE DRILLING FLUID; POWDER FORM,CYRISTALLINE SILICA AND

SEPIOLITE,FOR A HIGH TEMPERATURE VISCOSIFER, ONE OF THE COMPONENT OF

CLAY FREE OIL-BASED DRILLING FLUID SYSTEMS OF HALLIBURTON # BAROID

INNOVERT (LOW TOXICITY MINERAL OIL BASE) AND INTEGRADE (DIESEL BASE).

1000908546





9COM/9CAT

95Chemicals

(Drilling Fluids)

RHEOLOGY MODIFIER -

OMNIPLEX

ADDITIVE DRILLING FLUID; LIQUID FORM,ANIONIC SYNTHETIC POLYMER IN

EMULSION FORM,FOR A LIQUID POLYMERIC PREMIER VISCOSIFIER WHICH HELPS

TO IMPROVE THE RHEOLOGICAL AND SUSPENSION CHARACTERISTIC OF LOW

TOXICITY MINERAL OIL- AND SYNTHETIC OIL-BASED DRILLING FLUIDS OR IN

DIESEL OIL-BASED MUD. IT HELPS INCREASE PRIMARILY LOW SHEAR

RHEOLOGICAL,ANIONIC SYNTHETIC POLYMER IN EMULSION

FORM,DRUM,PHYSICAL PROPERTIES: APPEAR BOILING POINT: ~ 100 OC

MELT/FREEZE POINT: -12 OC PH VALUE CONC. SOLN: 2 # 5 FLASH

PO,PARAMETERS VALUE #FANN-35 F1 SPRING 6 RPM READING @ 120 OF EQUAL

OR GREATER THAN 9 #FANN-35 F1 SPRING 3 RPM READING @ 120 OF EQUAL OR

GREATER THAN 8#LOW SHEAR YIELD POINT LSYP @120 OF EQUAL OR GREATER

THAN 7#.

1000904472

96Chemicals

(Drilling Fluids)OIL SOLUBLE H2S SCAVENGER

ADDITIVE DRILLING FLUID; LIQUID FORM,HYDROCARBON,FOR OIL SOLUBLE

HYDROGEN SULFIDE SEQUESTERING AGENT/SCAVENGER AQUEOUS SOLUTION

MIXTURE OF INORGANIC COMPOUNDS, FOR THE REMOVAL OF H2S IN VARIOUS

APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL

ROAD TRANSPORTATION, DRILLING MUD, REFINING AND P,PROPRIETARY BLEND

OF ZINC COMPOUNDS IN HYDROCARBON BASE,DRUM,APPEARANCE/ODOR:

VISCOUS YELLOW TO YELLOW-GREEN LIQUID /MILD ODOR. BOILING POINT: 180

DEG CELSIUS. VAPOR PRESSURE: 0.50 MMHG. SOLUBILITY IN WATER: INSOLUBLE.

SPECIFIC GRAVITY: 0.9 (WATER = 1.0). MOLECULAR WEIGHT: PROPRIETARY. PH: 6-

7. FLASH POINT (METHOD): >200F. FOR THE REMOVAL OF H2S IN VARIOUS

APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL

ROAD TRANSPORTATION, DRILLING MUD, REFINING AND PETROCHEMICAL

PLANTS, CRUDE OIL SHIPMENTS AND DISPOSAL WELLS.

1000843350

97Chemicals

(Drilling Fluids)

HTHP FLUID LOSS SYNTHETIC

POLYMER

ADDITIVE DRILLING FLUID; WHITE POWDER FORM,SYNTHETIC POLYMER,FOR

CONTROLS HTHP FLUID LOSS IN FRESH, SALTY, OR HARD BRINE FLUIDS. IT

INHIBITS SHALE AND STABILIZING FLUID RHEOLOGY. IT CONTROLS WATER LOSS

IN ALL ENVIRONMENTS AND REDUCES DIFFERENTIAL STICKING TENDENCIES.,25

LB MULITIWALL PAPER BAG,APPEARANCE : WHITE COLOURED PO.

1000847072





9COM/9CAT

98Chemicals

(Drilling Fluids)SEALING PARTICLES LCM

ADDITIVE DRILLING FLUID; POWDER FORM,SPECIAL BLEND OF GRADED SEALING

PARTICLES.,FOR DESIGNED TO BE EFFECTIVE IN CURING SEVERE TO TOTAL LOSS

CIRCULATION IN HIGHLY FRACTURED/VUGULAR OR POROUS CARBONATE

FORMATIONS, WITHOUT THE ADDITION OF OTHER CONVENTIONAL LCMS IT CAN

BE USED IN ALL TYPES OF DRILLING FLUIDS AND IT IS NOT

RECOMMENDED,SPECIAL BLEND OF GRADED SEALING

PARTICLES.,BAG,APPEARANCE: LIGHT TAN/BROWN SPECIFIC GRAVITY: 0.9

SOLUBILITY IN WATER: INSOLU PH: 6.5-7.5.

1000866812

99Chemicals

(Drilling Fluids)

HIGH SOLIDS HIGH FLUID LOSS

LCM

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE,FOR HIGH FLUID LOSS LCM

FORMS A RAPID SOLID PLUG AGAINST LOSS ZONE WHEN LIQUID PHASE IS

SQUEEZE FROM SLURRY IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF

WATER/OIL BASED MUDS.,MIXTURE,BAG,APPEARANCE: OFF-WHITE TO GA BULK

DENSITY: 41-46 LB/CU PH: 11.5-12.8.

1000881942

100Chemicals

(Drilling Fluids)SWELLING SEALING LCM

ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE OF POLYSACCHARIDES,FOR

SWELLING/SEALING AGENT USED TO FILL FRACTURES AND VOIDS BY CREATING A

SOLID INNER MATRIX SEAL IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF

WATER/OIL BASED MUDS. USUALLY PUMPED AHEAD OF EZ-SQUEEZE OR CEMENT

JOB AND IT HAS A GOOD SOLUBILITY IN ACID,MIXTURE OF

POLYSACCHARIDES,PAIL,APPEARANCE: LIGHT TAN TO OF BULK DENSITY: 35-55

BA/CU.

1000881943

101Chemicals

(Drilling Fluids)DRILZONE - ROP enhancer

ADDITIVE DRILLING FLUID; LIQUID FORM,IVE ND OF SURFACE,FOR SPECIAL BLEND

OF SURFACE AGENTS ROP ENHANCER ,USED IVE IN THE WATER BASE MUD FOR

REDUCING TORQUE AND ,DRAG AND PREVENTING BIT BALLING. NORMAL

TREATMENT:1-2% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE IDCAP

D, KLA-STOP AND POROSEAL.,IVE ND OF SURFACE,55 GAL/ DRUM,APPEARANCE:

YELLOW TO BROWN 0.78- FLASH POINT: > 201°F UID SPECIFIC GRAVITY.

1000875822

102Chemicals

(Drilling Fluids)KLA-STOP

ADDITIVE DRILLING FLUID; LIQUID FORM,POLYAMINE DERIVATIVE,FOR USED FOR

SUPPRESSING CLAY SWELLING. IT EFFECTIVELY , INHIBITS SHALE OR GUMBO

CLAYS FROM HYDRATING , AND MINIMIZES THE POTENTIAL FOR BIT BALLING.

NORMAL TREATMENT: 1-4% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF

DRILZONE , IDCAP D, KLA-STOP AND POROSEAL,POLYAMINE DERIVATIVE,DRUM

55 GAL/ DRUM,PH (5% SOLUTION): 9.2-10. FLASH POINT: > 200°F

EARANCE:COLORLESS LIQUID CIFIC GRAVITY: 1.03-1.0.

1000875823





9COM/9CAT

103Chemicals

(Drilling Fluids)IDCAP D

ADDITIVE DRILLING FLUID; POWDER FORM,DRY ACRYLIC ACID COPOLYMER,FOR

ENCAPSULATION COPOLYMER USED TO PROVIDE CUTTINGS , ENCAPSULATION

AND CLAY DISPERSION INHIBITION WITH MINIMAL VISCOSITY CONTRIBUTION

FOR WATER BASE FLUIDS AND SALINE WATER ENVIRONMENTS. NORMAL

TREATMENT: 2-4 LB/BBL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE,DRY

ACRYLIC ACID COPOLYMER,BAG 25 KG/SACK,APPEARANCE: WHITE POWDER

SPECIFIC GRAVITY: 0.8 PH (1% SOLUTION): 6.

1000875824

104Chemicals

(Drilling Fluids)POROSEAL

ADDITIVE DRILLING FLUID; LIQUID FORM,STARCH COPOLYMER,FOR PROVIDES

PERMEABILITY PLUGGING TO EFFECTIVELY SEAL SHALES AND FILTER CAKES,

IMPROVING THE PERFORMANCE OF HIGHLY INHIBITIVE WATER-BASE DRILLING

FLUIDS. IT ADDITIVE IS ALSO USED TO PROVIDE SUPPLEMENTAL FLUID LOSS

CONTROL IN HIGH-TEMPERATURE APPLICATIONS NORMAL POROSEAL -SHIELD

SYSTEM CONSISTS DRILZONE IDCAP D, KLA-STOP ATMENT:2-5%

VOL/VOL.,STARCH COPOLYMER,55 GAL/DRUM,APPEARANCE: WHITE LIQUID

SPECIFIC GRAVITY: 1.0-1.1 PH (CONC. SOLUTION): 10.

1000875825

105Chemicals

(Drilling Fluids)BARABRINE Defoam

ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF NONIONIC

SURFACTANTS,FOR NON-DAMAGING FLUIDS RDF-615 AND NON-RESERVOIR

WBM AND BRINES, INCLUDING ZNBR2,BLEND OF NONIONIC SURFACTANTS,PAIL

(ONE PAIL = 5 GALLONS),APPEARANCE: COLORLESS CLEAR LI,ADDITIVE FOR FLUID

FORMULATION FOR SYSTEM RDF-615. THIS DEFOAMER IS USED AS PART OF THE

NON-DAMAGING FLUIDS RDF-615, WHICH INCLUDES BARAZAN D PLUS, BARA

CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM:

1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM:

1000775559), BARACARB 50 (MM:1000775560) AND BAROLUBEGOLD SEAL (MM:

1000757580). TYPICAL TREATMENT IS 0.05-0.25 LB/BBL (0.007-0.033 GAL/BBL).

THIS DEFOAMER CAN ALSO BE USED IN NON-RESERVOIR WATER BASED MUDS

AND BRINES, INCLUDING ZNBR2. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB

CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000908534





9COM/9CAT

106Chemicals

(Drilling Fluids)PUREFIED XANTHAN GUM

ADDITIVE DRILLING FLUID; POWDER FORM,VISCOSIFIER / SUSPENSION AGENT

(POLYSACCHARIDE),FOR FRESH WATER, SEA WATER AND BRINE,DISPERSANT-

ADDED BIOPOLYMER (XANTHAN GUM),BAG (ONE BAG =55 LBS),APPEARANCE:

YELLOW TO WHITE PO,ADDITIVE FOR FLUIDFORMULATION FOR SYSTEM RDF-615.

IT IS A BIOPOLYMER XANTHAN GUM USED TO HELP TO DISPERSE EASILY, AND TO

PROVIDE VISCOSITY AND SUSPENSION IN FRESH WATER, SEA WATER AND IN

BRINES, AS SODIUM AND POTASSIUM BROMIDES AND SODIUM AND POTASSIUM

CHLORIDES. IT IS STABLE AT 250 DEG F (121 DEG C). TYPICAL TREATMENT OF 0.1-

2 LB/BBL (0.3-5.7 KG/ CUBIC M) AS NEEDED TO OBTAIN THE DESIRED VISCOSITY.

THE UNIT IS 55 LBS (25 KG)/BAG. IT IS PART OF A NON-DAMAGING SYSTEM RDF-

615, WHICH CONTAINS BARABRINE DEFOAM, BARA CARB 150, OXYGON,

BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5

(MM: 1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:

1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).

1000908458

107Chemicals

(Drilling Fluids)

Ground Marble CaCO3, 50-150,

55 LB

ADDITIVE DRILLING FLUID; POWDER OR GRANULES FORM,SIZED CALCIUM

CARBONATE (CACO3) MARBLE QUALITY,FOR WATER BASED MUD (WBM), OIL

BASED MUD (OBM) AND BRINE,CALCIUM CARBONATE (CACO3) MARBLE

QUALITY.,BAG (ONE BAG = 55 LBS),APPEARANCE: WHITE POWDER OR

GR,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. SIZED MARBLE

CALCIUM CARBONATE (D50 = 150 MICRONS) USED TO INCREASE DENSITY IN

WBM AND OBM FOR RESERVOIR APPLICATIONS AND BRINES AND AS A BRIDGING

AGENT FOR FLUID LOSS CONTROL AND SEALING/LCM IN NON - DAMAGING

SYSTEMS. THE UNIT IS 55 LBS (25 KG) / BAG. IT IS PART OF THE RDF -615 WHICH

CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, OXYGON, BARABUF (MM:

1000184370), N DRILL HT PLUS (MM:1000788390), BARACARB5 (MM:

1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:

1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).

1000908535





9COM/9CAT

108Chemicals

(Drilling Fluids)Oxygon

ADDITIVE DRILLING FLUID; POWDER FORM,ORGANIC ACID SALT (OXYGEN

SCAVENGER),FOR FRESH WATER, WATER BASED MUD (WBM) AND MONO OR

DIVALENT BRINES,GRANULAR ERYTHORBATE MATERIAL,PAIL (ONE PAIL =55

LBS),APPEARANCE: WHITE GRANULAR POW,ADDITIVE FOR FLUID FORMULATION

FOR SYSTEM RDF-615. IT IS USED AS A CORROSION INHIBITOR OR OXYGEN

SCAVENGER IN WBM, WATER AND IN MONO OR DIVALENT BRINES/COMPLETION

FLUIDS. THE UNIT IS 55 LBS (25KG)/PAIL. IT IS PART OF THE NON-DAMAGING

SYSTEM - RDF -615 SYSTEM WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D

PLUS, BARA CARB 150, BARABUF (MM: 1000184370), N DRILL HT PLUS

(MM:1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25

(MM:1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL

(MM: 1000757580). TYPICAL TREATMENT OF 0.1 LB/BBL. BASE THE TREATMENT

OF CIRCULATING FLUIDS ON OXYGEN CONTENT.

1000908459

109Chemicals

(Drilling Fluids)MAGNESIUM OXIDE

CHEMICAL; GR TECHNICAL,M20,POWDER FORM,22.7 KG (50 LB) - 25.0 KG (55 LB)

SACK,96% MG0 MIN,MAGNESIUM OXIDE,SHIPMENT OF PRODUCT SHALL

CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE PRODUCT

SHOULD BE PACKED IN 3 OR 4 PLY PAPER SACKS

1000184370

110Chemicals

(Drilling Fluids )

Marble Madium CaCO3, 135-165,

2200 LB

ADMIXTURE: DRILLING MUD; GROUND MARBLE: MEDIUM GRADE; 135-165

MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;

DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED

AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR

ROCKS,GROUND MARBLE MEDIUM ,135-165 MICRON PURE METAMORPHOSED

CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB

BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND

LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED

METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS

W/LIMESTONE ARE NOT ACCEPTABLE 135-165 MICRON PARTICLE, 95% SOLUBLE

IN 15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE,

WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT,

MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO

SUSTAIN NORMAL HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF

LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS..THE DISPOSABLE SUPER SACKS

SHOULD HAVE AT LEAST 75% OF THEIR SHELF LIFE REMAINING WHEN SHIPPED

OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.

1000021819





9COM/9CAT

111Chemicals

(Drilling Fluids )BIOCIDE - GLUTARALDEHYDE

EPOXY PLASTIC CAN, GLUTARALDEHYDE ADMIXTURE DRILLING MUD; AQUEOUS

SOLUTION FORM,GLUTARALDEHYDE,FOR A MICROBIOCIDE USED IN DRILLING

FLUIDS TO CONTROL AEROBIC AND ANAEROBIC BACTERIA INCLUDING SULFATE

REDUCERS,AQUEOUS SOLUTION OF GLUTARALDEHYDE,5 GAL PLASTIC

CAN,CORROSIVE TO COMMON METAL, IDEAL STORAGE TEMPERATURE 80 DEG F,

IN EPOXY PLASTIC CONTAINER CONTAINER PROPERLY LABELED, VENDOR'S NAME

MANUFACTURER'S NAME AND LOCATION PRODUCTION DATE AND BATCH

NO.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB

CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).THE

ORIGINAL MANUFACTURER, (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021556

112Chemicals

(Drilling Fluids )

WATER SOLUBLE CORROSION

INHIBITOR

INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; CORROSION, COAT B-1400

TYPE,55 GAL DRUM,CATIONIC, WATER SOLUBLE, HETEROCYCLIC AMINE,

BLENDED WITH METHANOL MICROBIOSTAT TO CONTROL AEROBIC & ANAEROBIC

BACTERIA GROWTH, USE AS A CORROSION INHIBITOR PACKER FLUID.PRODUCT


ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000022136

113Chemicals

(Drilling Fluids )DEGREASER, 55 GAL

DEGREASER: GENERAL PURPOSE; SLIK NO. 5; 55 GALLON DRUM. CLEANER;

DEGREASER, GENERAL PURPOSE TYPE,LIQUID FORM,FOR RIGS, CUTTING WASH

FOR OIL MUD SYSTEMS & OIL SLICK DISPERSANT,55 GAL DRUM,TYPE "SLIK NO 5",

SOLUBLE IN WATER & ORGANIC SOLVENTS REQUIRES SAUDI ARAMCO HAZCOM

LABEL IN MM# 1000644175..PRODUCT MANUFACTURER AND OR SUPPLIER

REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF

ORIGIN (COO).

1000022131





9COM/9CAT

114Chemicals

(Drilling Fluids )MICA COARSE, 55 LB

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) MULTI-WALL SACK; SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE

FORM,MICA,FOR LOST CIRCULATION,25 KG OR 50 LB BAG,17 LB/FT MAXIMUM,

SIEVE SPECIFICATION 2% ON MESH NO 6, 22% ON MESH NO 8, 28% ON MESH NO

12, 20% ON MESH NO 16, 15% ON MESH NO 20, 9% ON MESH NO 40, 4% THRU

MESH NO 40 MULTI-PLY BAG, SHIPMENT OF PRODUCT SHALL CONFORM TO

SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE

MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB

MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL

KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE

BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE

VALVE/SPOUT TYPE COMPLETELY SEALED. THE ORIGINAL MANUFACTURER,

PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,

EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR

PAPER BAGS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO

SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021679

115Chemicals

(Drilling Fluids )SODIUM SULFITE

CHEMICAL; GR COMMERCIAL HIGH,SODIUM SULFITE,FOR REMOVE TRACES OF

DISSOLVED OXYGEN,POWDER FORM,60 KG (132 LB) PLASTIC RIMMED FIBER OR

METAL DRUM WITH POLYETHYLENE LINER,95% ANHYDROUS SODIUM SULFITE BY

WT MIN, CATALYZED WITH COBALT -0.03% BY WT MIN,OXYGEN SCAVENGER,26-

SAMSS-027,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644272..

THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF

PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS

AND/OR PAPER BAGS.

1000185026





9COM/9CAT

116Chemicals

(Drilling Fluids)CALCIUM HYDROXIDE - LIME

ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM HYDROXIDE (HYDRATED

LIME) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE POWDER

FORM,CALCIUM HYDROXIDE, CA(OH)2 (TECHNICAL GRADE),FOR TO CONTROL PH,

BICARBONATE, AND H2S CONTAMINATION. LIME IS ALSO A PRIMARY

COMPONENT OF INVERT EMULSION MUDS,CALCIUM HYDROXIDE (HYDRATED

LIME),25 KG OR 50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI

ARAMCO EXPORT PACKING MANUAL MULTI-WALLED PAPER BAGS, CONTAINER

PROPERLY LABELED, W/VENDOR'S NAME, MANUFACTURER'S NAME AND

LOCATION, PRODUCTION DATE AND BATCH NO. NOTE: THE CONSTRUCTION OF

THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75

LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL


BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER

1000021558

117Chemicals

(Drilling Fluids)

ACRYLIC COPOLYMER BASE,

SWEEPING AGENT

ADDITIVE DRILLING FLUID; SOLID FORM,ACRYLIC COPOLYMER BASE,FOR TO

PROVIDE VISCOSITY, REDUCE FRICTION, ENCAPSULATE CUTTINGS AND PROVIDE A

LIMITE AMOUNT OF FLUID-LOSS CONTROL IN WATER-BASE DRILLING FLUIDS. IT IS

A POLYMER STICK THATEASILY ADDED TO THE DRILLSTRING DURING

CONNECTIONS AND PROVIDES A CONSISTENT METHOD OF,ACRYLIC COPOLYMER

BASE,PAIL,APPEARANCE: TUBE FILLED WI STICK SPECIFIC GRAVITY: 1.0 SOLUBILITY

SOLUBLE IN WATER SIZE: 1-1/4 X 15 IN.

1000876207





9COM/9CAT

118Chemicals

(Drilling Fluids )

Marble Chips CaCO3, 550-650,

2200 LB

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; (550-650)





ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE, METAMORPHOSED

CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB





15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE,

WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT,

MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO

SUSTAIN NORMAL HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF

LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS.THE DISPOSABLE SUPER SACKS

SHOULD HAVE AT# LEAST 75% OF THEIR SHELF LIFE REMAINING WHEN # SHIPPED

OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.

1000021818

119Chemicals

(Drilling Fluids )

OIL SOLUBLE CORROSION

INHIBITOR

INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; CORROSION, COAT-415

TYPE,55 GAL DRUM,CATIONIC, OIL SOLUBLE, DISPERSIBLE IN WATER BASED

DRILLING MUDS, FILMING POLYAMINE SALT OF A MODIFIED FATTY ACID FOR

DRILL PIPE PROTECTION.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED

TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN

(COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE

OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE

PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS

AND/OR PAPER BAGS.

1000022134





9COM/9CAT

120Chemicals

(Drilling Fluids )

NONTREATED SODIUM

BENTONITE 25KG SACK

ADMIXTURE: DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE

DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM

MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATER-

BASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT

CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,MULTI-WALLED BAGS, 25

KG OR 50 LB BAG,API 13A AND API 13 I (LATEST EDITION),CONTAINER TO BE

PROPERLY LABELED W/VENDOR'S NAME, MANUFACTURER'S NAME AND

LOCATION, PRODUCTION DATE, BATCH NUMBER AND STOCK NUMBER. OTHER

ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE HARMFUL TO

PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. PROPER TUBE

SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED AND

EXPERIENCED PERSONNEL. NOTE: THE CONSTRUCTION OF THE MULTI-WALLED

PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL

KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD

PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE

AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE

COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED

TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN

(COO).

1000021551

121Chemicals

(Drilling Fluids)COTTONSEED HULLS, 55 LB

ADMIXTURE: DRILLING MUD; 25 KG (50 LB) 4 PLY PAPERSACK; SHIPMENT OF

PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE

FORM,COTTONSEED HULLS,FOR LOST CIRCULATION,FINES & DUST FREE,25 KG OR

50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT

PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER

BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT

PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY

SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED

INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH

A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB MIN. NATURAL KRAFT

PAPER (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY

SEALED, MOISTURE AND WATER PROOF.

1000021603





9COM/9CAT

122Chemicals

(Drilling Fluids)BAROFIBER COARSE, 40 LB

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL

FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE

BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID

BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,40

LB/SACK,APPEARANCE: COARSE:GRANUALTED MATERIAL, BULK DENSITY: 31

LB/FT(497 KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS,

DENSITY@20C (KG/L) 1.1, FREEZING POINT 190 C, FLASH POINT 193 C, SOLUBILITY

IN WATER: INSOLUBLE, OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL

TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.

1000789221

123Chemicals

(Drilling Fluids)LIQUID PHPA

ADMIXTURE: DRILLING MUD; PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA);

MINIMUM 32% ACTIVE NON CONFIGURED; ADMIXTURE: DRILLING MUD,

PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA), MINIMUM 32% ACTIVE FROM

LIQUID BASE MATERIAL PARTIALLY HYDROLIZED POLYACRYLAMIDE SERVICE

SHALE STABILIZER COMPOSITION 32% ACTIVE CONTAINER 5 GAL/CAN

STANDARDS SUPPLEMENTARY REQUIREMENTS DRILLING FLUID ADDITIVE

1000021673

124Chemicals

(Drilling Fluids )

Marble Chips CaCO3, 1900-2100,

2200 LB

ADMIXTURE: DRILLING MUD; MARBLE CHIPS: (1900-2100 MICRONS)

METAMORPHIC CALCIUM CARBONATE CACO3 & CAMG (CO3)2 ADMIXTURE

DRILLING MUD; DRY CHIPS FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED, OIL-BASED


ROCKS,(1900-2100 MICRONS) METAMORPHIC CALCIUM CARBONATE, PURE,

SOLUBLE,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY LABELED, VENDOR'S

NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE,BATCH NO.

AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE, LIMESTONE CHIPS

ARE NOT ACCEPTABLE, LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV

STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT MINIMUM TENSILE

STRENGTH FACTOR 5, FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL

HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI

ARABIAN CLIMATIC CONDITIONS.THE DISPOSABLE SUPER SACKS SHOULD HAVE

AT LEAST 75% OF THEIR SHELF LIFE REMAINING (THE PERIOD FROM THE DATE OF

MANUFACTURE TO THE WARRANTED EXPIRATION DATE) WHEN SHIPPED OR

RECEIVED AT DESIGNATED PLACE OF DELIVERY TO SAUDI ARAMCO.#REFER TO

SAP NUMBER: 1000840600 FOR DISPOSABLE SUPER SACKS SPECIFICATION..

1000021677





9COM/9CAT

125Chemicals

(Drilling Fluids)

HYDROCARBON BASED

DEGREASER

CLEANER; CONTACT TYPE,LIQUID FORM,FOR ELECTRIC MOTOR AND

EQUIPMENT,20 LITER CAN,HYDROCARBON BASED CLEANER & DEGREASER,FLASH

POINT (CLOSED CUP) 63 DEG C, NON-CONDUCTIVE & NON-CORROSIVE,

APPERANCE CLEAR LIQUID.

1000732382

126Chemicals

(Drilling Fluids )

Marble Chips CaCO3, 550-650, 55

LB

ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; 550-650





ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE METAMORPHOSED

CALCIUM CARBONATE CACO3 & CAMG (CO3)2,MULTI-WALLED, 25 KG OR 50 LB





IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE

MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB

MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL


BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE

VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR

SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO).

1000021815





9COM/9CAT

127Chemicals

(Drilling Fluids )

MARBLE FINE, PURE CaCO3 - 55

LB BAGS

ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON

PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE

FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)

METAMORPHOSED,FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL

AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS,GROUND

MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE

CACO3 & CAMG (CO3)2,MUTI-WALLED, 25 KG OR 50 LB BAG,PROPERLY LABELED,

VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION

DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE

GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 9-11

MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE:


AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY

75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER

(EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE

BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT


ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).

1000021814

128Chemicals

(Drilling Fluids)

THINNER MODIFIED TANNIN -

DRILL THIN

ADDITIVE DRILLING FLUID; BROWN COLORED POWDER FORM,MODIFIED TANNIN

COMPOUND,FOR USED AS MUD CONDITIONER PROVIDING RHEOLOGY CONTROL

IN WATER BASE FLUIDS WITH MAXIMUM DEFLOCCULATING AND SHEAR

STRENGTH REDUCTION AT LOW CONCENTRATIONS.,25 LB MULITIWALL PAPER

BAGS,APPEARANCE: BROWN COLORED POWD,CONTAINER MUST BE PROPERLY

LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT

PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND

OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO).

1000845427





9COM/9CAT

129Chemicals

(Drilling Fluids)

CEMENT SPACER VISCOSIFIER, IN-

HOUSE

ADDITIVE DRILLING FLUID; GREY POWDER FORM,VISCOSIFIER FOR IN-HOUSE

CEMENT SPACER SYSTEM,,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER

SYSTEM FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE

MUD SYSTEMS DESIGNED TO PROVIDE FLUID LOSS CONTROL AND VISCOSITY

ALLOWING USERS TO EASILY FORMULATE A CEMENT SPACER WITH THE DESIRED

RHEOLOGY CERTIFICATE OF ORIGIN COO DENSITY THIS VISCOSIFIER I LOSURF-

259 SAP #1000811529 A SYSTEM TO FORMULATE -S SAP # 1000903745 ENT

SPACER DESIGNS FOR IDS PACKAGED IN 50-LB COMBINATION WITH DIACEL®

TIWALL WATER RESISTANT BAGS ANALYSIS (COA) WITH NON-AQUEOUS DRILLING

DER TO SUBMIT CERTIFICATE,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE

CEMENT SPACER SYSTEM,BAG,APPEARANCE: OFF-WHITE POWDE SPECIFIC

GRAVITY: 2.08 G/M TEMPERATURE: 40°F - 400°F CONCENTRATION: 2-22 LBS/BB.

1000903746

130Chemicals

(Drilling Fluids)

CEMENT SPACER ANTI-FOAMER,

IN-HOUSE

ADDITIVE DRILLING FLUID; LIQUID FORM,ANTI-FOAMER FOR IN-HOUSE CEMENT

SPACER SYSTEM,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER SYSTEM

FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE MUD

SYSTEMS DESIGNED TO PREVENT AIR-ENTRAPMENT AND USED DURING MIXING

TO PROVIDE AN ACCURATE FLUID WEIGHT. THIS ANTI-FOAMER IS USED IN

COMBINATION LOSURF-259(SAP# 1000811529 A SYSTEM TO FORMULATE ENT

SPACER DESIGNS FOR USE TIFICATE . TIFICATE OF ORIGIN COO IDS PACKAGED IN

A 5 GALLON -ANALYSIS (COA) AND STIC PAIL .VENDER TO SUBMIT COSIFIER (SAP#

1000903746) H DIACEL® ADJUSTABLE SPACER H NON -AQUEOUS

DRILLING,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE CEMENT

SPACER,PAIL,APPEARANCE: VISCOUS WHITE SPECIFIC GRAVITY = 1.00 G BOILING

POINT > 35 C (>95F VISCOSITY: 10000 CST FLASHPOINT: > 101.1°C (>21.

1000903745

131Chemicals

(Drilling Fluids)

CHEMICAL: SODIUM

HEXAMTAPHOSPHATE

CHEMICAL; GR FOOD,SODIUM HEXAMETAPHOSPHATE,FOR POTABLE WATER

TREATMENT,GRANULAR FORM,40-45 KG (88-100 LB) DRUM,SODIUM

HEXAMETAPHOSPHATE,AWWA B502,REQUIRES SAUDI ARAMCO HAZCOM LABEL

IN MM# 1000642502

1000186247





9COM/9CAT

132Chemicals

(Drilling Fluids)Acid Precursor - ORCA-B

ADDITIVE DRILLING FLUID; LIQUID FORM,ORGANIC ESTERS,FOR A LIQUID

ORGANIC ACID PRECURSOR WHICH WILL GENERATE ORGANIC ACID IN#SITU

DOWNHOLE WHICH HAS THE CAPABILITY TO DISSOLVE CALCIUM CARBONATE

FILTER CAKE SOLIDS TO REMOVE FORMATION DAMAGE DUE TO CARBONATE

SOLIDS PLUGGING,55 GAL PER DRUM,A PROPRIETARY BLEND OF ORGANIC

ESTERS,PHYSICAL PROPERTIES:APPEARANCE,A LIQUID ORGANIC ACID PERCURSOR

WHICH WILL GENERATE ORGANIC ACID IN-SITU DOWNHOLE WHICH HAS THE

CAPAVILITY TO DISSOLVE CALCIUM CARBONATE FILTER CAKE SOLIDS TO REMOVE

FORMATION DAMAGE DUE TO CARBONATE SOLIDS PLUGGING. IT IS TO BE USED

TOGETER WITH ORCA-4 WATER-WETTING SURFCTANT IN THE PREPARATION OF

THE PROPRIETARY MUDWASH FILTER-CAKE BREAKER SYSTEM FOR OBM

WELLBORE CLEAN-UP. VENDOR TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO). 210 KG (55 GAL)

1000905195

133Chemicals

(Drilling Fluids)

Water wetting surfactant - ORCA-

4

ADDITIVE DRILLING FLUID; LIQUID FORM,WATER WETTING SURFACTANTS,FOR A

LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE PREPARATION OF

WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABILITY OF THE FILTER CAKE

SOLIDS FROM OIL-WET TO WATER # WET.,A WATER-WETTING SURFACTANT

MIXTURE,55 GAL PER DRUM,PHYSICAL PROPERTIES : APPEARAN,#CONTAINER

MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME

LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S

PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS

NEEDED.####A LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE

PREPARATION OF WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABLITY OF

THE FILTER CAKE SOLIDS FROM OIL-WET TO WATER-WET. IT IS TO BE USED

TOGETHER WITH ORCA-B THE ACID PRECURSOR IN THE PREPARATION OF THE

PROPRIETARY MUDWASH FILTER CAKE BRAKER SYSTEM FOR OBM WELLBORE

CLEAN-UP. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND

CERTIFICATE OF ORIGIN (COO). 200 KG (55 GAL).

1000905196





9COM/9CAT

134Chemicals

(Drilling Fluids)

WBM filter cake removal -

Enzyme

ADDITIVE DRILLING FLUID; LIQUID FORM,ENZYME PROTEIN,FOR FILTER CAKE

REMOVAL FOR WATER BASED MUD AND BRIDGING PARTICLES PRESENT IN THE

CAKE, REMOVING THE NEAR-WELLBORE DAMAGE,ENZYME PROTEIN,DRUM (ONE

DRUM = 55 GALLONS),APPEARANCE: LIGHT BROWN LIQUID,ADDITIVE FOR

DRILLING FLUID. IT IS A FILTER CAKE REMOVAL FOR WATER BASED MUD WHICH

BREAKS DOWN THE STARCH POLYMERS PRESENT IN THE MUD FILTER CAKE

BREAKING ITS INTEGRITY AND ENABLE MORE EFFICIENT ACIDIZING TREATMENT

OF ACID-SOLUBLE DRILL SOLIDS AND BRIDGING PARTICLES PRESENT IN THE CAKE,

REMOVING THE NEAR-WELLBORE DAMAGE. TYPICAL TREATMENT IS 5 - 6% V/V.

SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA)

AND CERTIFICATE OF ORIGIN (COO).

1000908540

135Chemicals

(Drilling Fluids)

LOW TOXICITY BASED OIL

FSARALINE 185V

ADDITIVE DRILLING FLUID; CLEAR LIQUID FORM,CLEAN NATURAL GAS

ORIGIN,FOR IT IS LOW TOXICITY MINERAL OIL USE AS BASE OIL FOR

FORMULATING OIL-BASED DRILLING FLUID IT IS COMPATIBLE WITH ALL OIL

BASED DRILLING FLUIDS ADDITIVES. IT IS COMPARABLE WITH LOW TOXICITY

MINERAL OIL AND TS SPECIFICATION OF # 1000022138 AS STATED BEL,A

MIXTURE OF ALKANES. CLEAR AND ODORLESS PARAFFIN OIL,GALLON,TM D1319)

TM D611) TM D93) LYSIS (COA) AND LINE POINT: MORE THAN 75 DE HORIZED

ZENE CONTENT: NIL PPM ASSAY TEST): > 100,000 PPM. RY OUT TIFICATE OF

ORIGIN (COO). SH POINT: MORE THAN 85 DEG 50 (MYSID SHRIMP 96-HR : 0.77-

0.97 (ASTM D1298) FINS CONTENT: NIL PPM KAGING AS PER SAUDI ARAMCO

YNUCLEAR AROMATIC: NIL PPM PLING AND TESTING AS NEEDED DI ARAMCO

PERSONNEL WILL CIFIC GRAVITY AT 15 OC : PLIER/VENDOR IS REQUIRED SUBMIT

LAB CERTIFICATE OF AL AROMATIC: LESS THAN 0.5.

1000908544

136Chemicals

(Drilling Fluids)

CHEMICAL: GR ACS, SODIUM

SULFITE,

CHEMICAL; GR ACS,SODIUM SULFITE,FOR REDUCE FREE CHLORINE & OXYGEN

CONTENT OF RAW WATER PRELIMINARY TO WATER SOFTENING,POWDER

FORM,50 KG (110 LB) DRUM WITH POLYETHYLENE INNER BAG,97% ANHYDROUS

SODIUM SULFITE MIN UNCATALYZED SOLUBLE IN WATER,OXYGEN

SCAVENGER,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642488

1000186443

137Chemicals

(Drilling Fluids)

ANTIFREEZE: TRIETHYLENE

GLYCOL, LIQUID

ANTIFREEZE; TRIETHYLENE GLYCOL TYPE,TECHNICAL, LIQUID, 208.2 LITER/ DRUM

TO BE LABELED IN ARABIC AND ENGLISH AS FOLLOWS: TRIETHYLENE GLYCOL S/N

26-922-105-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 10006441911000187171





9COM/9CAT

138Chemicals

(Drilling Fluids )

ANTIFREEZE: MONO ETHYLENE

GLYCOL (MEG)

ANTIFREEZE; MONO ETHYLENE GLYCOL (MEG) TYPE,SPECIFIC GRAVITY 20/20 C

1.115-1.116, DISTILLATION RANGE 196.0-199.0 DEG C AT 760 MM HG, WATER

(W/W) 0.05% MAX, IRON (PPM W/W) 0.1 MAX, ACIDITY WT AS ACETIC ACID

0.001% MAX, 225-250 KG, 208.2 L (55 GAL) DRUM, TECHNICAL, LIQUID, ARAMCO

LABORATORY ANALYSIS IS REQUIRED, DRUM TO BE LABELED IN ARABIC AND

ENGLISH AS FOLLOWS, "MONO ETHYLENE GLYCOL (MEG)" S/N 26-382-444-00

REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644200

1000182767

139Chemicals

(Drilling Fluids)

CHEMICAL: GR USP, CITRIC ACID,

POWDER

CHEMICAL; GR USP,CITRIC ACID,FOR LABORATORY,POWDER FORM,50 KG (110 LB)

NET WT POLYETHYLENE LINED DRUM,99.5% CITRIC ACID MIN,CITRIC ACID

(ANHYDROUS),REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 10006442781000177936

140Chemicals

(Drilling Fluids)

CHEMICAL: GR A, METHANOL,

LIQUID,

CHEMICAL; GR A,METHANOL,LIQUID FORM,208.2 L (55 US GAL) STEEL

DRUM,SYNTHETIC,METHYL ALCOHOL (WOOD ALCOHOL),ASTM D1152, FED SPEC

O-M-232G GRADE A,DRUM TO BE LABELED IN ARABIC & ENGLISH AS FOLLOWS:

"METHANOL" S/N 26-646-940-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN

MM# 1000642494

1000184543

141Chemicals

(Drilling Fluids )31% HCl, 13 GAL

CHEMICAL; GR TECHNICAL,HYDROCHLORIC ACID,FOR REGENERATION OF

DEMINERALIZER BEDS,LIQUID FORM,49 L (13 GAL) POLYETHYLENE CARBOY

ENCASED IN A WOODEN BOX,31% SOLUTION W/W MIN, IRON 20 PPM MAX,

SULFATE 0.2% MAX, CLORINE (CL2) 100 PPM MAX, ORGANIC CONTAMINANTS

0.05 GM/L MAX,MURIATIC ACID,UN 1789, CAS NO 7647-01-0,US DEPT OF

TRANSPORT HAZARDOUS LABEL "CORROSIVE" MUST BE AFFIXED TO CONTAINER

REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642493

1000183214

142Chemicals

(Drilling Fluids)POTASSIUM HYDROXIDE

CHEMICAL; GR TECHNICAL,POTASSIUM HYDROXIDE,FREE FLOWING GRANULAR

OR FLAKES FORM,25 KG (55 LBS)/SACK,POTASSIUM CARBONATE, K2CO3 0.8%

WT, MAXIMUM POTASSIUM CHLORIDE 0.02% WT MAXIMUM, IRON 0.001% WT

MAXIMUM,90% KOH PURITY, SHIPMENT OF PRODUCT SHALL CONFIRM TO SAUDI

ARAMCO EXPORT PACKING MANUAL. SAUDI ARAMCO WILL CARRY OUT

SAMPLING AND TESTING AS NEEDED.

1000185389





9COM/9CAT

143Chemicals

(Drilling Fluids)FIBER, 25 LB

ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL

FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE

BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID

BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,25

LB/SACK,APPEARANCE: FINE: BROWN POWDERED, BULK DENSITY: 31 LB/FT(497

KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS, DENSITY@20C (KG/L)

1.1, FREEZING POINT 190 C, FLASH POINT 193 C, OTHER ASSOCIATED ELEMENTS

MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID

PROPERTIES.

1000789220





9COM/9CAT

144Chemicals

(Drilling Fluids )

BARITE DISP. BAG, 90X90X100

CM, 1.5 TON

CONTAINER; DISPOSABLE BAG TYPE,SIZE 90 CM X 90 CM X 100 CM,1.5 TON OR

3300 LBS,BARITE,REGULAR BAG SHAPE,TOP STRAP CLOSURE,ORANGE,THE FOUR

LIFITNG STRAPS SHOULD EXTEND TO THE FULL BODY OF THE BAGS, REFERENCE

TO SAUDI ARAMCO PACKING SPECIFICATIONS MS-8314-11, 1. DIMENSION &

WEIGHT: HEIGHT 100 CMS(39"), WIDTH: (90 CMSX 90 CMS) 35" X35", WEIGHT:

2.90 KGS(WITH LINER), VARIANCE ON WEIGHT: 100 GRAMS +/-, LAMINATION:NIL,

2. BODY FABRIC: MATERIAL POLYPROPYLENE, COLOUR: ORANGE, GSM: 200,

MESH: 11X12, 3. GENERAL: SAFE WORKING LOAD: 1500 KGS, SAFETY FACTOR:

5:01, 4. PRINTINGL: ONE SIDE ONE COLOUR, 5. SEWING THREAD: COLOUR:

WHITE, 6. LIFTING LOOP: CROSS CORNER: FOURLOOPS, LOOP WIDTH: 7.5 CMS,

LOOP LENGTH ABOVE THEBAG: 30 CMS, LOOP LENGTH ON THE BAG: 40 CMS,

FULL LOOP: AROUND THE BAG, STEVE DORING LOOP: NIL, FILLING

ARRANGEMENT: SPOUT DIA: 40CMS (16"), LENGTH OF SPOUT: 50CMS (20"),

COLOUR OF SPOUT FABRIC: WHITE, TYPE OF CLOSURE: SIMPLE CLOSURE,

DISCHARGE ARRANGEMENT: NO SPOUT AND BOTTOM MUST BE FLAT, LINER

SPECIFICATIONS: TYPE OF LINER: PILLOW TYPE LOOSE LINER INSERTED AND

FASTENED TO BOTTOM SPOUT, SIZE OF LINER: 190 CMSX 300 CMS, MICRON

THICKNESS OF LINER: 120 MICRON MINIMUM, WEIGHT OF LINER: 1200 GRAMS

+/- 50 GRAMS, WEIGHT OF BAG INCLUSIVE OF LINER: 2700 GRAMS +/- 100

GRAMS, STRENGTH PARAMETERS: BODY FABRIC: 200 GSM WITH RF (STRENGTH-

ABOVE 200KGF), BOTTOM PANEL: 205 GSM (STRENGTH-ABOVE 210KGF), TOP

PANEL: 160 GSM (STRENGTH-ABOVE 130KGF), FILLING AND DISCHARGE SPOUT:

75 GSM (STRENGTH-ABOVE 80KGF), LIFTING LOOP: 55G/M (STRENGTH-ABOVE

1950KGF), BODYLOOP: 30G/M (STRENGTH-ABOVE 950KGF), TIE TAPE: 6G/M

(STRENGTH-ABOVE 150KGF), SEWING THREAD USEDIN PANEL ATTACHMENT:

3300 DENIER (STRENGTH-ABOVE 20KGF), SEWING THREAD USED IN LOOP

ATTACHMENT: (1000 DENIER/2PLAY (STRENGTH-ABOVE 15KGF).

1000840600

145Chemicals

(Drilling Fluids)

SODIUM BROMIDE (NaBr) WHITE

CRYSTALS

ADDITIVE DRILLING FLUID; FINE CRYSTAL FORM,SODIUM BROMIDE,FOR SODIUM

BROMIDE IS AN INORGANIC COMPOUND THAT IS USED TO PREPARE DENSE

CLEAR FLUIDS FOR USE IN DRILLING, COMPLETION OR WORK&#8208 GAS WELLS.

R OF OIL OR,SODIUM BROMIDE,PP WOVEN BAG WITH PE LINER

INSIDE,APPEARANCE: WHITE FINE CRYSTAL,CONTAINER MUST BE PROPERLY

LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,

PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT

PROPER SAMPLING AND TESTING AS NEEDED.

1000847074





9COM/9CAT

146Chemicals

(Drilling Fluids)POWDER PHPA

ADDITIVE DRILLING FLUID; POWDER FORM,HIGH-MOLECULAR WEIGHT PARTIALLY-

HYDROLYZED POLYACRYLAMIDE (PHPA),FOR IT PROVIDES BOREHOLE STABILITY

AND REDUCES FRICTION IN SENSITIVE SHALE SECTIONS. IT, ALSO, ACTS AS A

FILTRATION CONTROL AND INCREASES VISCOSITY IN WATER-BASED DRILLING

FLUIDS.,PARTIALLY-HYDROLYZED POLYACRYLAMIDE (PHPA),BAG,APPEARANCE:

GRANULAR WHITE SOLID POLYMER. SOLUBILITY I,CONTAINER MUST BE


LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL

CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.

1000866365

147Static Equipment

(Heat Transfer)

HEAT EXCHANGER; ELECTRIC; 32-

SAMSS-027;HEAT EXCHANGER; ELECTRIC TYPE,32-SAMSS-027

6000002436

148Static Equipment

(Heat Transfer)

BURNER; HIGH INTENSITY, FOR

SULFURBURNER; HIGH INTERSITY TYPE,HIGH INTERSITY,FOR SULFUR RECOVER UNIT

REACTION FURNACE6000011229

149Static Equipment

(Fittings)

FLANGE; BLIND; COPPER-ALLOY,

EEMUA 145;FLANGE BLIND NON-KHUFF; FLANGE COPPER-ALLOY, EEMUA 145 ND

6000000180

150Static Equipment

(Fittings)

FLANGE; PIPE; COPPER NICKEL,

EEMUA 145FLANGE PIPE; ALL DESIGNS TYPE,EEMUA 145,EEMUA 145,COPPER-ALLOY

FLANGES AND CS BACKING (LAP JOINT) FLANGES PER EEMUA6000000181

151Static Equipment

(Fittings)

FLANGE; COMPACT WN PAIR, M-

F CONNECTOR

FLANGE PIPE; COMPACT FLANGE WN PAIR, WN-BLIND, WN-WN SWIVEL-RING OR

AS DESIGNED TYPE,ASME CLASS 900 AND ABOVE SUPPLY,WN WITH SELF-

ENERGIZING SEAL TERMINAL,ANY STEEL PER 02-SAMSS-011,ASME SEC VIII

DESIGN,02-SAMSS-011,COMPLETE ASSEMBLY WITH MALE-FEMALE CONNECTOR,

SEAL RING, BOLTS AND NUTS

6000000188

152Static Equipment

(Fittings)FLANGE; NON-METALIC BLIND

FLANGE BLIND; EPOXY, POLYESTER, VINYL ESTER RESIN,01-SAMSS-034,SAES-S-040

SAES-S-0706000000225

153Static Equipment

(Fittings)

FLANGE: BLIND, EPOXY RESIN, 01-

SAMSS-034FLANGE BLIND; EPOXY RESIN,01-SAMSS-034

6000011660

154Static Equipment

(Fittings)

FITTING; PIPE; CUNI;ALL

TYPES;EEMUA 146

FITTING: PIPE; CUNI PIPE FITTINGS, ALL TYPES, EEMUA 146 INCLUDING ELBOWS,

TEES, REDUCERS, CAPS, COUPLING, BRANCH CONNECTION, BW OR SW OR

THREADED AS PER EEMUA 146. NON-HYDRCARBON UTILITY.

6000014202

155Static Equipment

(Heat Transfer )

HOSE: CORRUGATED METALLIC

ASSEMBLIESHOSE; ISO 10380,CORRUGATED METALLIC HOSE ASSEMBLIES

6000015210

156Static Equipment

(Valves)

VALVE; GATE; THRU

CONDUIT;EXPANDING GATE

VALVE GATE THRU CONDUIT; SIZE NPS 2 AND UP,ASME CL 150 AND UP

SUPPLY,FLANGED OR BUTTWELD END CONN,STYLE EXPANDING GATE,STEEL

BODY,04-SAMSS-050,WITH OR WITHOUT ACTUATOR

6000000290

157Static Equipment

(Valves)

VALVE; GATE; UP TO 12 INCH;

NON-FERROUS;

VALVE GATE; SIZE UP TO NPS 12,ANY RATING, ALLENDS SUPPLY,NON-FERROUS,

(BRONZE/ALUMINUM-BRONZE BODY,04-SAMSS-035,04-SAMSS-048 04-SAMSS-

001,WITH OR WITHOUT ACTUATOR

6000000292





9COM/9CAT

158Static Equipment

(Valves)

VALVE; PLUG; EXPANDING;04-

SAMSS-041;

VALVE PLUG; EXPANDING TYPE,SIZE ANY SIZE,ANY PRESSURE RATING

SUPPLY,STEEL BODY,04-SAMSS-041,04-SAMSS-035 04-SAMSS-048,WITH OR

WITHOUT ACTUATOR

6000000307

159Static Equipment

(Valves)VALVE: CHOKE; API 6A, 10000 PSI

VALVE CHOKE; NEEDLE AND SEAT TYPE,1-13/16 IN & UP BODY,PR 10000

PSI,HUBBED, FLANGED OR BUTTWELD END CONN,MR API 6A,STEEL BODY,04-

SAMSS-049,04-SAMSS-035 04,WITH OR WITHOUT ACTUATOR

6000000313

160Static Equipment

(Valves)

VALVE; CHECK; 2 THRU 24 IN;

SOFT SEAT

VALVE CHECK; SIZE 2 THRU 24 INCH,ANSI CL 150 AND UP SUPPLY,STEEL

BODY,SWING,REGULAR,FLANGED OR BUTTWELD END CONN,METAL OR SOFT

SEAT,04-SAMSS-005,04-SAMSS-035

6000000326

161Static Equipment

(Valves)VALVE: HYDRANT PIT, JET FUEL

VALVE; HYDRANT PIT TYPE,SIZE ALL SIZES,ALL RATINGS SUPPLY,FOR JET FUEL,

CONTACT CSD FOR DETAILS.6000004665

162Static Equipment

(Valves)

VALVE; GATE, GLOBE&CHECK,

CRYOGENICVALVE GATE; GLOBE&CHECK, CRYOGENIC TYPE,SIZE ANY SIZE,ANY RATING

SUPPLY,04-SAMSS-035,04-SAMSS-048,GLOBE,CHECK CRYOGENIC6000013010

163Static Equipment

(Valves)

VALVE; PLUG; Full Opening

LUBRICATED

VALVE PLUG; LUBRICATED TYPE,FULL BORE BORE,STEEL BODY,04-SAMSS-035,04-

SAMSS-048 API 599 AND ASME B16,FULL BORE TO ALLOW FOR THE PASSAGE OF

SCRAPERS WITH OR WITHOUT ACTUATOR

6000013743

164Static Equipment

(Valves)

VALVE, BALL; HIGH

PERFORMANCE STEEL

VALVE BALL; ANSI CL 150 AND UP SUPPLY,FLANGED OR BUTTWELD END

CONN,STYLE SPLIT BODY,SEAT SUPPORTED SUPPORT,METAL SEATED SEAT,04-

SAMSS-035,04-SAMSS-048 04-SAMSS-051,HIGH PERFORMANCE STEEL AND ZERO

LEAKAGE, WITH OR WITHOUT ACTUATOR

6000013744

165Static Equipment

(Valves)VALVE;BUTTERFLY; TRICENTRIC

VALVE BUTTERFLY; HIGH PERFORMANCE TYPE,TRICENTRIC,CL 150 AND UP

SUPPLY,FLANGED OR BUTTWELD END CONN,04-SAMSS-035,04-SAMSS-048 API

6D,API 609,HIGH PERFORMANCE, ZERO LEAKAGE, WITH OR WITHOUT ACTUATOR6000013745

166Static Equipment

(Valves)

VALVE: BLIND; STEEL; FULL BORE;

NPS

VALVE; BLIND TYPE,SIZE NPS 2 THRU 24,ASME CLASS 150 AND UP

SUPPLY,FLANGED END CONN,STEEL BODY,ASME SCE VII DIV 1, ASME B31.3,FULL

BORE, FOR NON- HYDROCARBON SEVICES

6000014054

167Static Equipment

(Valves)

VALVE: BALL;1-13/16 IN AND UP;

API 10000

VALVE BALL; SIZE 1-13/16 IN AND UP,API 10000 SUPPLY,FLANGED OR BUTTWELD

END CONN,STYLE SPLIT BODY,TRUNNION SUPPORT,METAL SEAT,04-SAMSS-049 6000014982

168Static Equipment

(Vessels)

TANK; FIBER GLASS; 32-SAMSS-

002TANK; FIBER GLASS,32-SAMSS-002

6000002481

169Static Equipment

(Process Vessels)

SKID; NITROGEN GENERATION;

MEMBRANE TYPESKID; MEMBRANE TYPE,32-SAMSS-038,NITROGEN GENERATION

6000002461

170Static Equipment

(Process Vessels)

SKID; DRYER, INSTRUMENT AIR &

COMPRESSEDSKID; DRYER TYPE,32-SAMSS-038,INSTURMENT AIR & COMPRESSED GAS

6000002879

171Static Equipment

(Tubes)

DRIER, LIQUID, GAS AND

COMPRESSED AIRDRIER; LIQUID,GAS AND COMPRESSED AIR,LIQUID, GAS AND COMPRESSED AIR

6000002414





9COM/9CAT

172Static Equipment

(Tubes)

TUBE BUNDLE; TWISTED TUBE

TYPE, HEATTUBE; 32-SAMSS-007

6000011344

173Static Equipment

(HVAC)

AIR HANDLING UNIT; AHU;

CHILLED WATER OR

AIR HANDLING UNIT; AHU TYPE,CHILLED WATER OR DIRECT

EXPANSION,ONSHORE ALL SIZES AND OFFSHORE LESS THAN 10 TONS

COOLING,MANUFACTURER STANDARD

6000001821

174Static Equipment

(HVAC)

AIR CONDITIONING UNIT; SELF

CONTAINED; OAIR CONDITIONING UNIT; SELF CONTAINED TYPE,(PACKAGED UNIT) CERTIFIED TO

AHRI 340 AND UL 1995 STD6000001822

175Static Equipment

(HVAC)

AIR CONDITIONING UNIT;

PACKAGED UNIT TRAAIR CONDITIONING UNIT; PACKAGED UNIT TRAILERIZED TYPE,AIR COOLED,R-22

OR R-134A,MANUFACTURER STANDARD6000001823

176Static Equipment

(HVAC)

HVAC; THROUGH THE WALL;

WINDOW UNITAIR CONDITIONING UNIT; WINDOW TYPE,R-22 AND R-134A,AHRI-210/240 UL-

484,USE 9COM 6000001826 INSTEAD.6000001825

177Static Equipment

(HVAC)

A/C Unit,mini-split,DE below 5.5

Tons

AIR CONDITIONING UNIT; AIR CONDITIONING UNIT SPLIT TYPE, LESS THAN 5.5

TON COOLING TONNAGE, DIRECT EXPANSION TYPE,AHRI 210/240,UL-1995 6000001826

178Static Equipment

(HVAC)

CONDENSING UNIT; AIR COOLED;

ONSHORE ALLCONDENSING UNIT AIR COOLED; ONSHORE ALL SIZES AND OFFSHORE LESS THAN

10 TONS COOLING,MANUFACTURER STANDRADRS6000001831

179Static Equipment

(HVAC)

CONTROLLER; PROGRAMMABLE

LOGIC; ENERGY M

CONTROLLER PROGRAMMABLE LOGIC; ENERGY MANAGEMENT SYSTEM:

BUILDING 6000001838

180Static Equipment

(HVAC)

A/C UNIT;SPLIT;DIRECT EXP,5.5

TO 63 TONS

AIR CONDITIONING UNIT; AIR CONDITIONING UNIT SPLIT UNIT DIRECT

EXPANSION TYPE,SIZES 5.5 TO 63 COOLING TONNAGE COOLING,AHRI

340/360,UL1995

6000001862

181Static Equipment

(HVAC)

AIR CONDITIONING UNIT;

AIRCONDIONING AND

AIR CONDITIONING UNIT; AIRCONDIONING AND PROCESS REFRIGERATION

SYSTEMS TYPE,ONSHORE ALL SIZES, OFFSHORE LESS THAN 10 TONS. COOLING,AB

REFRIGERATION SYSTEMS,EXPLOSION PROOF

6000001881

182Static Equipment

(HVAC)

CHILLER: HVAC/REFRIG, PACKGD

RECIPROCTG,CHILLER; HVAC/REFRIGERATION TYPE,PACKAGED RECIPROCATING, AIR COOLED,

FOR NON-PROCESS APPLICATIONS6000001884

183Static Equipment

(HVAC)

AIR VOLUME BOX; VAR OR

CONSTBOX; AIR VOLUME, VARIABLE OR CONSTANT TYPE

6000013335

184Static Equipment

(HVAC)

CHILLER: ABSORPTION; WATER

COOLED

CHILLER; ABSORPTION WATER COOLED DIRECT FIRED OR STEAM TYPE,AHRI

560,FOR HVAC APPLICATION. ABSORPTION WATER CHILLING AND WATER

HEATING PACKAGES

6000012733

185Rotating Equipment

(Compressor)

COMPRESSOR: PROCESS; SCREW;

WETCOMPRESSOR PROCESS; SCREW TYPE,API-619,WET, GAS APPLICATIONS

6000013840


(Pump)

TURBINE, HYDRAULIC RECOVERY,

API STDTURBINE; HYDRAULIC TYPE,31-SAMSS-004,POWER RECOVERY

6000014644


(Pump)

DEVICE:HYDRAULIC POWER

RECOVERY, MFR STDTURBINE; HYDRAULIC TYPE,MFR STANDARD,POWER RECOVERY

6000014646





9COM/9CAT


(Power Transmission)

COUPLING: VARIABLE SPEED,

HYDRAULIC

COUPLING SHAFT; 13-SAMSS-001,API 613,FOR ROTATING EQUIPMENT, VARIABLE

SPEED HYDRAULIC FLUID TYPE, WITH OR WITHOUT GEAR, WHEN GEAR ROTORS

ARE USED, THE GEARS SHALL COMPLY TO 13-SAMSS-001/API 613.6000000722


(Compressor)

COMPRESSOR; PROCESS; SCREW;

DRYCOMPRESSOR PROCESS; SCREW TYPE,API-619,DRY, GAS APPLICATIONS

6000002339


(Turbine, Gas)

TURBINE: WIND, FOR POWER

GENERATORTURBINE; WIND TYPE,IEC 61400,FOR POWER GENERATOR

6000015090


(Blowers)BLOWER; CENTRIFUGAL

BLOWER; CENTRIFUGAL TYPE,31-SAMSS-001 CHAPTER 2 OR 36000002340


(Compressor)

PUMP; VACUUM; API 681, HIGH

POWERPUMP; VACUUM TYPE,API 681,HIGH POWER, LIQUID RING VACUUM PUMPS OR

COMPRESSORS6000002365


(Pump)

PUMP; CENTRIFUGAL; CANNED

MOTOR;PUMP CENTRIFUGAL; CANNED MOTOR TYPE,ASME B73.3M / ISO15783

6000002367


(Turbine, Gas)

FILTER; ELEMENT; COMBUSTION

GAS TURBINE;FILTER ELEMENT; FOR COMBUSTION GAS TURBINE,32-SAMSS-008,AIR INLET,

FINAL STAGE6000002417

195 Rotating EquipmentENGINE: DIESEL, FIRE WATER

PUMP DRIVER

ENGINE DIESEL; FIRE WATER PUMP DRIVER (PER UL 1247 OR FM 1333)

TYPE,EMERGENCY/STANDBY SERVICE CYCLE,PER UL 1247 OR FM1333 COOLED,30-

SAMSS-001,UL 1247,FM 1333,INSPECTION FORM 175-300100

6000016250


(Compressor)COMPRESSOR; RECIPROCATING;

COMPRESSOR; RECIPROCATING TYPE,FOR PLANT & INSTRUMENT AIR6000002246


(Compressor)

COMPRESSOR; DRY-SCREW, FOR

AIR SERVICECOMPRESSOR; DRY-SCREW TYPE,31-SAMSS-002,FOR AIR SERVICE

6000002338


(Compressor)

COMPRESSOR; PROCESS; SCREW;

DRYCOMPRESSOR PROCESS; SCREW TYPE,API-619,DRY, GAS APPLICATIONS

6000002339


(Compressor)

COMPRESSOR:PROCESS;CENTRIF

UGAL;SEAL-LESSCOMPRESSOR PROCESS; CENTRIFUGAL TYPE,31-SAMSS-001,API-617,SEAL-LESS,

GAS APPLICATIONS6000014055


(Compressor)

COMPRESSOR:PROCESS;CENTRIF

UGAL INTEGRALYCOMPRESSOR PROCESS; CENTRIFUGAL, INTEGRALLY GEARED TYPE,31-SAMSS-001

6000014210


(Pump)PUMP: ROTARY, VANE, API 676

PUMP ROTARY; VANE TYPE,API-6766000002304


(Pump)

PUMP; CENTRIFUGAL; CANNED

MOTOR;PUMP CENTRIFUGAL; CANNED MOTOR TYPE,ASME B73.3M / ISO15783

6000002367


(Pump)

PUMP;

CENTRIFUGAL;VERTICAL;MOLTO

N SULFUR

PUMP CENTRIFUGAL; VERTICAL TYPE,MFR STD DESIGN +SAES-G-005,MOLTEN

SULFUR, SUMP 6000002371


(Pump)

PUMP, CENTRIFUGAL,

HORIZONTAL, MOLTEN SUPUMP CENTRIFUGAL; HORIZONTAL TYPE,MFR STD DESIGN +SAES-G-005,MOLTEN

SULFHUR6000008842





9COM/9CAT


(Pump)

PUMP: MULTIPHASE, ROTARY,

API 676PUMP; MULTIPHASE, ROTARY, SCREW OR PROGRESSIVE TYPE,API 676

6000010365

206 Rotating EquipmentPUMP; ROTARY; PROGRESSIVE

CAVITY;PUMP ROTARY; PROGRESSIVE CAVITY TYPE,API 676

6000002363


(Pump)

PUMP: CENTRIFUGAL; SEALLESS;

VERTICALPUMP CENTRIFUGAL; SEALLESS TYPE,VERTICAL MTG,MFR STD

6000014690

208 ElectricalPOLE; LINE; POWER

DISTRIBUTION; STEEL;

POLE LINE; POWER DISTRIBUTION TYPE,14-17 METERS LG,OCTAGONAL SHAPE

SHAPE,GALVANIZED STEEL,14-SAMSS-603,SINGLE PIECES 14-17 METERS IN

LENGTH, LONGER THAN 14 METERS MAY BE MANUFACTURED IN TWO PIECES,

SHALL BE PRE-DRILLED AND SUPPLIED COMPLETE WITH POLE TOP CAP AND BASE

PLATE.

6000000771

209Electrical

(Switchgear)

SWITCHGEAR; SF6 GAS

INSULATED, 380 KVSWITCHGEAR; SF6 GAS INSULATED TYPE,380 KV,SEC 32-TMSS-02

6000016000

210Electrical

(HV Cable)CABLE; POWER, 380 KV,

CABLE ELECTRICAL HIGH VOLTAGE; 380 KV SUPPLY,XLPE TYPE,SEC 11-TMSS-026000016001

211Electrical

(Solar Energy)

INVERTER, SOLAR POWER,

PHOTOVOLTAICINVERTER; PHOTOVOLTAIC SOLAR TYPE,AA GRID CONNECTION

6000014451

212

Electrical

(Cathodic Protection -

Above Grade

Equipment)

CABLE;ELECTRICAL, CP,

OFFSHORE ANODE

CABLE ELECTRICAL; ORED HODIC PROTECTION OFFSHORE TYPE,17-SAMSS-

017,ARMORED6000000957

213Electrical

(Switchgear)

SWITCHGEAR; LV CONTROLGEAR,

FIREWATER PU

SWITCHGEAR; CONTROLGEAR,FIREWATER PUMP TYPE,UL-218,LOW

VOLTAGE,OUTDOOR 6000000919

214Electrical

(Switchgear)

SWITCHGEAR; HV

CONTROLGEAR, FIREWATER PU

SWITCHGEAR; CONTROLGEAR,FIREWATER PUMP TYPE,UL-218,HIGH

VOLTAGE,OUTDOOR 6000000920

215Electrical

(Cable Support)

POLE LINE; POWER

TRANSMISSION, 69 KVPOLE LINE; POWER DISTRIBUTION TYPE,17 METERS AND UP LG,OCTAGONAL

SHAPE SHAPE,GALVANIZED STEEL,SEC6000014870

216

Electrical


Above Grade

Equipment)

POWER

SUPPLY;ELECTRICAL;SOLAR,CP

POWER SUPPLY ELECTRICAL; HODIC PROTECTION POWER PLY ELECTRICAL SOLAR

POWER TYPE,17-SAMSS-0126000001011

217

Electrical


Below Grade or

Immersed Equip.)

ANODE;GALVANIC,HIGH

TEMPERATURE ZINC,CP

ANODE GALVANIC; HIGH TEMPERATURE ZINC,17-SAMSS-006,CATHODIC

PROTECTION6000015510





9COM/9CAT

218

Electrical


Below Grade or

Immersed Equip.)

ANODE

GALVANIC;MAGNESIUM,WITHO

UT LEAD,CP

ANODE GALVANIC; MAGNESIUM,17-SAMSS-006,CATHODIC PROTECTION

WITHOUT LEADS6000001040

219Electrical

(Cathodic Protection)

CABLE;

ELECTRICAL;OFFSHORE/ONSHOR

E,CP

CABLE ELECTRICAL; CATHODIC PROTECTION TYPE,STRANDED, NEGATIVE &

POSITIVE TYPE,SINGLE INSULATED INSUL LV,HMWPE INSUL,FOR

OFFSHORE/ONSHORE,17-SAMSS-017

6000001045

220 ElectricalSTATIC SWITCH, UPS

APPLICATIONSSWITCH; UPS APPLICATIONS,SOLID STATE STATIC TRANSFER TYPE,17-SAMSS-

516,EXTERNAL STAND-ALONE6000001058

221

Electrical


Below Grade or

Immersed Equip.)

BOX: JUNCTION, FOR U/G

ANODE BED,CP

BOX ELECTRICAL; CATHODIC PROTECTION UNDERGROUND ANODE BED JUNCTION

BOX TYPE,SIZE 2500CM3 (MINIMUM),CYLINDRICAL OR BOX SHAPE,12X16MM2

AND 2X70MM2 CONNECTN,12+2 TERMINAL SCREW LUG COONECTN,FOR

WEATHERPROOF (DIRECT BURIAL),NON-CLASSIFIED,NON-METALLIC SUITABLE

FOR DIRECT BURIAL AND IMMERSION SERVICE IN AMBIENT TEMPERATURE

SEAWATER,OPTIONAL FINISH,OPTIONAL THK,17-SAMSS-008 'JUNCTION BOX FOR

CATHODIC PROTECTION',MEMBRANE GLANDS & FILLER/ SEALING COMPOUND

SUITABLE FOR DIRECT BURIAL AND IMMERSION SERVICE IN AMBIENT

TEMPERATURE SEAWATE

6000012080

222

Electrical


Below Grade or

Immersed Equip.)

ANODE: GALVANIC,

MAGNESIUM,CP

ANODE GALVANIC; MAGNESIUM,17-SAMSS-006,CATHODIC PROTECTION LARGE

SIZE CYLINDRICAL, FOR OFFSHORE APPLICATION6000012790

223

Electrical

(Transformer, power

& distribution)

UNIT; MOBILE SUBSTATION

UNIT; MOBILE SUBSTATION TYPE,60044,IEC60376, 60076,IEC60255,

60332,IEC60146, 60478,IEC60529, 60518,IEC60099, 62271,IEC60137,ALL

COMPONENTS DETAILS ARE BASED ON AND INSPECTED TO IEC STANDARDS.

OPERATING AT 230 KV, 115KV, OR 69KV CONSISTING OF: EIGHT (8) AXLES

SEMITRAILER , METAL OXIDE SURGE ARRESTERS, SWITCHGEAR, DISCONNECT

SWITCHES, CURRENT TRANSFORMERS AND AUXILIARIES, CAPACITIVE VOLTAGE

TRANSFORMER , POWER TRANSFORMER , AUXILIARY TRANSFORMER,

CONDITIONED CONTAINER, PROTECTION/ CONTROL PANELS, BATTERIES

EQUIPMENT, SCADA CAPABILITIES. ((COMPONENTS DETAILS AND REQUIREMENTS

SHOULD BE DETERMINED IN THE PURCHASE REQUEST.

6000015902





9COM/9CAT

224

Instrumentation and

IT

(Valve, Control)

VALVE: BACKFLOW PREVENTER;

FOR INSTRUMEN

VALVE; BACKFLOW PREVENTER INSTRUMENT INSTALLATIONS6000002680

225

Instrumentation and

IT

(Controller: HYD; ESD,

SSV & SSSV)

MONITOR; WELL HEAD ESD;;

MONITORING & CO

MONITOR; WELL HEAD ESD, TYPE,WELL HEAD ESD,MONITORING & CONTROL

SYSTEMS6000002721

226

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

ESD; RELAYS

RELAY PROTECTION ELECTRO-MECHANICAL; 34-SAMSS-622,EMERGENCY

SHUTDOWN SYSTEM RELAY BASED USED TO SAFELY SHUTDOWN A PROCESS IN

CASE OF PROCESS DEVIATING TO HAZARDOUS OPERATING CONDITIONS.6000002724

227

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

ESD; ELECTRONIC; SOLID STATE

RELAY PROTECTION SOLID STATE; EMERGENCY SHUTDOWN SYSTEM ACTION,34-

SAMSS-621,SOLID STATE ELECTRONICS BASED USED TO SAFELY SHUTDOWN A

PROCESS IN CASE OF PROCESS DEVIATING TO HAZARDOUS OPERATING

CONDITIONS.

6000002725

228

Instrumentation and

IT

(Monitoring Eqpt

(Vibration, etc))

MONITOR; FLAME MONITORING

SYSTEM

MONITOR; IGNITERS AND BURNERS USED E MONITORING SYSTEM D IN FIRED

EQUIPMENT. TYPE,34-SAMSS-6176000002732

229Instrumentation and

ITNOZZLE; FLOW;

NOZZLE; FLOW TYPE6000002740

230

Instrumentation and

IT

(Instrumentation)

MONITOR; GAS; HYDROGEN

SULFIDE;

MONITOR GAS; HYDROGEN SULFIDE,34-SAMSS-5146000002786


ITRECORDER; MULTI-POINT;

RECORDER; MULTI-POINT TYPE6000002807

232

Instrumentation and

IT

(Gauges, Indicators,

Recorders)

SWITCH; TARGET

SWITCH FLOW; FLOW TYPE, INSTRUMENTATION

6000002831

233

Instrumentation and

IT

(Valves,

Instrumentation)

VALVE; CHECK; LEVEL GAUGE

GLASS; FLOW SH

VALVE CHECK; LEVEL GAUGE GLASS, FLOW FLOW SHUT-OFF SPRING,LEVEL

GAUGE GLASS, FLOW SHUT-OFF6000002854

234

Instrumentation and

IT

(Instrumentation)

VALVE; AUTOMATIC

RECIRCULATION;

VALVE; AUTOMATIC RECIRCULATION TYPE,34-SAMSS-7116000002856





9COM/9CAT

235

Instrumentation and

IT

(Instrumentation)

VALVE; RELIEF; SURGE GAS

LOADED

VALVE RELIEF; SAES-J-605,SURGE GAS LOADED6000002896

236

Instrumentation and

IT

(MULTIPHASE FM)

FLOWMETER; MULTIPHASE;FLOWMETER; MULTIPHASE TYPE,34-SAMSS-001

6000002917


IT

CUSTODY METER, TURBINE,

LIQUIDFLOWMETER TURBINE; CUSTODY TRANSFER LIQUID TYPE,34-SAMSS-117

6000009831

238

Instrumentation and

IT

(Custody

Measurement)

CUSTODY METER, CORIOLIS,

LIQUID

FLOWMETER CORIOLIS; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER

LIQUID6000009833

239

Instrumentation and

IT

(Custody

Measurement)

CUSTODY METER, CORIOLIS GAS

FLOWMETER CORIOLIS; CUSTODY TRANSFER GAS TYPE

6000009883

240

Instrumentation and

IT

(Custody

Measurement)

CUSTODY CHROMATOGRAPH,

GAS OR LIQUID

CHROMATOGRAPH PROCESS; FOR CUSTODY TRANSFER CHROMOTOGRAPHY,34-

SAMSS-5116000009898

241

Instrumentation and

IT

(Custody

Measurement)

CUSTODY FLOW COMPUTER,

LIQUID, PANEL-MNT

COMPUTER FLOW; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER LIQUID

6000009899

242

Instrumentation and

IT

(Custody

Measurement)


GAS, PANEL-MNTD

COMPUTER FLOW; CUSTODY TRANSFER GAS TYPE,CUSTODY TRANSFER GAS

6000009900

243

Instrumentation and

IT

(Custody

Measurement)


LIQUID, FIELD-MNT

COMPUTER FLOW; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER LIQUID

6000009901

244

Instrumentation and

IT

(Custody

Measurement)


GAS, FIELD MOUNTD

COMPUTER FLOW; CUSTODY TRANSFER GAS TYPE,CUSTODY TRANSFER GAS

6000009902


IT

CUSTODY PRESET CONTROLLER,

TRUCK LOADINGCOMPUTER FLOW; CUSTODY PRESET CONTROLLER TYPE,34-SAMSS-847,FOR

TRUCK LOADING SYSTEMS6000009906





9COM/9CAT


IT

CUSTODY PRESET CONTROLLER

TRUCK UNLOADNGCOMPUTER FLOW; CUSTODY PRESET CONTROLLER TYPE,34-SAMSS-847,FOR

TRUCK UNLOADING SYSTEMS6000009907


ITCustody Tank Gauge, Radar

GAUGE TANK LEVEL; 34-SAMSS-321,CUSTODY TANK GAUGE, RADAR TYPE6000009908


IT

Custody Tank Management

System, RadarCOMPUTER; FOR CUSTODY TRANSFER,34-SAMSS-321,CUSTODY TANK

MANAGEMENT SYSTEM, RADAR6000009909

249

Instrumentation and

IT

(Custody Transfer

Measurement

Equipment)

CUSTODY WEIGH SCALE

SCALE WEIGH; CUSTODY TRANSFER TYPE,CUSTODY TRANSFER

6000009910

250

Instrumentation and

IT

(Communication,

Radio Equipment)

TETRA HANDHELD RADIO&DEVIS

FOR CLASSIFID

DEVICE; TETRA HANDHELD RADIO AND DEVICES FOR CLASSIFIED AREA

TYPE,TETRA HANDHELD RADIOS & TETRA DEVICES USED IN HAZARDOUS OR

CLASSIFIED AREAS SUCH AS OIL & GAS PLANTS, REFINERIES, PIPELINES, ETC6000010102

251

Instrumentation and

IT

(Multivariable

Instrumentation)

POWER SUPPLIES,FOUNDATION

FIELDBUS (FF)

POWER SUPPLY; FOUNDATION FIELDBUS (FF) TYPE,FOR USE WITH FOUNDATION

FIELD-BUS INSTRUMENTS ONLY6000010825

252

Instrumentation and

IT

(Valves, Relief/Safety

& Busting Disks)

VALVE, RELIEF; SURGE PILOT

OPERATED

VALVE RELIEF; SAES-J-605,SURGE PILOT OPERATED TYPE.FACTORYTESTING IS

REQUIRED FOR COMPLEX RATE-OF-RISE OR MODULATINGVALVES.6000012803

253

Instrumentation and

IT

(Temperature

Instrumentation)

Multiplexer; Foundation Fieldbus

(FF)

MULTIPLEXER; FOUNDATION FIELDBUS (FF) TYPE,SAES-J-904,AA MULTI-INPUT

TEMPERATURE6000013000

254

Instrumentation and

IT

(Monitoring Eqpt

(Vibration, etc))

CABINETS FOR VIBRATION

MONITORING SYS

CABINET; SAMSS-820 SAMSS-820,CABINETS FOR VIBRATION CABINETS FOR

VIBRATION MONITORING SYSTEMS (VMS MONITORING SYSTEMS (VMS

INTEGRATION) INTEGRATION) MONITOR; SAMSS-820 SAMSS-820,CABINETS FOR

VIBRATION CABINETS FOR VIBRATION MONITORING SYSTEMS (VMS

MONITORING SYSTEMS (VMS INTEGRATION) INTEGRATION)

6000013781

255

Instrumentation and

IT

(Custody

Measurement)

CUSTODY TANK GAUGING

SYSTEM, RADAR

GAUGE TANK LEVEL; SAES-Y-301,34-SAMSS-321

6000014614





9COM/9CAT

256

Instrumentation and

IT

(Communications)

CABLE: SUBMARINE FIBER OPTICCABLE; SUBMARINE FIBER OPTIC CABLE TYPE,STAND-ALONE SUBMARINE FIBER

OPTICAL CABLE,18-SAMSS-006 6000014631

257

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

REAL-TIME TRANSIENT MODEL

PLDS

DETECTOR LEAK; RTTM METHODS TYPE,FOR PIPELINE,SAES-Z-003,SYSTEMS USE

MATHEMATICAL MODELS OF THE FLOW WITHIN A PIPELINE TO DETECT THE LEAK6000014890

258

Instrumentation and

IT

(DCS, ESD & Plant

Control Systems)

ACOUSTIC PRESSURE WAVES

PLDS

DETECTOR LEAK; ACOUSTIC PRESSURE WAVES TYPE,FOR PIPELINE,SAES-Z-003,THE

ACOUSTIC PRESSURE WAVE METHOD ANALYSES THE RAREFACTION WAVES

PRODUCED WHEN A LEAK OCCURS.6000014891


IT

SKID; WELLHEAD HIPS, SELF-

CONTAINEDSKID; WELLHEAD HIPS TYPE,34-SAMSS-628,(HIGH INTEGRITY PRESSURE SYSTEM),

SELF-CONTAINED, WITH ALL RELATED COMPONENTS6000015901

260 Pipe & OCTG COUPLING: OCTG; HIGH NICKEL

COUPLING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,GR UNS N08020 OR EQUIVALENT,PREMIUM THREAD END CONN,COLLAPSE

TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE6000007293

261 Pipe & OCTGCASING: OCTG; HIGH NICKEL;

SEAMLESS

CASING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,GR UNS N08028 OR EQUIVALENT,PREMIUM THREAD END CONN,

COLLAPSE TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS

6000007303

262 Pipe & OCTG CROSSOVER: OCTG; HIGH NICKEL

CROSSOVER; OCTG, HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS

TYPE,PREMIUM THREAD TERMINAL,API-5CT, ISO-13680,COLLAPSE TEST PER API

WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE, GR UNS N08020

OR EQUIVALENT

6000007305

263 Pipe & OCTGPUP JOINT: CASING OCSG; HIGH

NICKEL

PUP JOINT OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,GR UNS N08028 OR EQUIVALENT,PREMIUM THREAD END CONN,COLLAPSE

TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE6000007307

264 Pipe & OCTGTUBING: OCTG; HIGH NICKEL;

SEAMLESS

TUBING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO-

13680,PREMIUM THREAD END CONN,COLLAPSE TEST PER API WITH ONE SAMPLE

TESTED PER 200 JOINTS OF MOTHER TUBE, UNS N08028

6000007350

265 Pipe & OCTGPUP JOINT: TUBING OCTG; HIGH

NICKEL

PUP JOINT OCTG; HIGH NICKEL ALLOY STAINLESS STEEL, TUBING,SEAMLESS,API-

5CT,ISO-13680,GR UNS N08028,PREMIUM THREAD END CONN,COLLAPSE TEST

PER API WITH SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE,6000007352

266Pipe & OCTG

(OCTG)COLLAR: DRILL; STANDARD

DRILL; SPIRAL/ SLICK TYPE,SIZE "3-1/8"" - 11"" OD",31 FEET LG,AISI 4145 H

MODIFIED,API-76000003831





9COM/9CAT

267 Pipe & OCTGTUBING: OCTG; API GR;

SEAMLESSTUBING OCTG; STEEL,SEAMLESS,API-5C2,API-5B 45-SAMSS-006

6000003877

268Pipe & OCTG

(OCTG)CASING: OCTG; API GR; ERW

CASING OCTG; STEEL,ERW OR SEAMLESS,AA 45-SAMSS-006,API-5L,SIZE 24 IN6000003851

269Pipe & OCTG

(OCTG)CASING: OCTG; API GR; SAW

CASING OCTG; STEEL,SAW,45-SAMSS-006,API-5L,SIZE 26 IN. AND LARGER6000003855

270Pipe & OCTG

(Pipe)

HEADER: PIPE; EXTRUDED OR

REINFORCEDHEADER PIPE; EXRUDED OR REINFORCED BRANCHES,ANY APPLICATION,ANY

APPLICATION6000000060

271Pipe & OCTG

(Pipe)

PIPE: METALLIC, WELD

OVERLAYED PIPEPIPE METALLIC; CARBON STEEL,OVERLAYED WITH CORROSION RESISTANT

ALLOY,01-SAMSS-048, API 5LD6000014017

272Pipe & OCTG

(Pipe)CUNI PIPE, EEMUA 144

PIPE; CUNI, EEMUA 144 TYPE6000014200

273Pipe & OCTG

(Pipe)

PIPE;METALLIC; HFW CLASS C

FOR SOUR GASPIPE METALLIC; ALL SIZE NPS,STEEL,GR B THRU X-65,HFW,API 5L,01-SAMSS-

333,CLASS C,FOR SOUR GAS SERVICE ONSHORE6000000046

274Pipe & OCTG

(Pipe)PIPE: METALLIC, LINED PIPE

PIPE METALLIC; CARBON STEEL,LINED WITH CORROSION RESISTANT ALLOY,01-

SAMSS-048, API 5LD6000014016

275 Pipe & OCTGPIPE; METALLIC; HFW CLASS B

FOR NON SOURPIPE METALLIC; ALL SIZE NPS,STEEL,GR GRADE B THRU X70,HFW,API 5L,01-SAMSS-

333,CLASS B,NON SOUR SERVICE6000000049

276Pipe & OCTG

(Pipe)

Pipe; Nonmetallic, Subsea

flexiblePIPE METALLIC; PA,PE & PVDF,FLEXIBLE PIPE,LINER AND OUTER SHEATHING,API

17J6000000037

277 Pipe & OCTGPIPE & FITTINGS;

THERMOPLASTIC;

PIPE NON-METALLIC; 1300 MM TO 3600 MM NPS,AA STRUCTURED

WALL,THERMOPLASTIC, HDPE, PVC, PP,FOR WATER, GRAVITY,DIN

16961,SEWERAGE, STORM WATER DRAIN, SEAWATER INTAKE AND OUTFALL

6000011205

278Pipe & OCTG

(Pipe)

UMBILICAL SYS, SUBSEA,

OFFSHORE, NONMETA

PIPE NON-METALLIC; 15-SAMSS-503,15-SAMSS-504 ISO 13628,UMBILICALSYSTEM

IS AN INTEGRATED BUNDLE OF TUBES, HOSES, POWER CABLESAND/OR FIBER

OPTICS ENCLOSED WITH AN OUTER RING SPECIALLYDESIGNED FOR THE SUBSEA

ENVIRONMENT TO WHICH IT WILL BE DEPLOYED.

6000014895

279 Pipe & OCTGPIPE; NON-METALLIC; ALL SIZES;

THERMOPLAPIPE NON-METALLIC; ALL SIZES NPS,THERMOPLASTIC, UPVC,ASTM D2665,ASTM

D17856000000031

280 Pipe & OCTG Pipe; Nonmetallic, (RTP) PIPE

PIPE NON-METALLIC; MAXIMUM 8 INCHES NPS,REINFORCED THERMOPLASTIC

(RTP),INTERNAL / EXTERNAL LINING THERMOPLASTIC(PE,PE- RT, PP

PA,PVDF,PREFABRICATED SPOOL ENDS,FOR WATER AND HYDROCARBON

APPLICATIONS MAX TEMP 180 F,API RP 15S FOR FIBER,REINFO 17J FOR STEEL

REINFORCED,ONSHORE / OFFSHORE WATER AND HYDROCARBON APPLICATIONS.

6000000042

281 Pipe & OCTG GRATING; FIBERGLASS GRATING FIBERGLASS; AB 12-SAMSS-021 AND 12-SAMSS-0 6000000631





9COM/9CAT

282Pipe & OCTG

(Pipe)PIPE&FITTINGS;NON-METAL;RTR

PIPE NON-METALLIC; MAXIMUM 30 IN. NPS,PER CALCULATION,REINFORCED

THERMOSETTING RESIN,REINFORCED THERMOSETTING RESIN,FOR WATER (NON-

UTILITY) AND HYDROCARBON APPLICATIONS MAX TEMP 210 F,01-SAMSS-042,API

RP 15HR API RP 15LR,FOR PIPE AND FITTINGS

6000013160

283 Pipe & OCTGGrating; Offshore; Fire

Retardant; Non-M

GRATING; FIRE RETARDANT TYPE,PULTRUDED PHENOLIC RESIN,12-SAMSS-

023,NONMETALLIC FIBER-REINFORCED COMPOSITE PLATFORMS. ASTM E84

RESOLUTION A653 (16) D635 M M D2863. SHORE 94

6000007813

284Pipe & OCTG

(Pipe)

PIPE; NON-METAL; LINED PIPING

SYSTEMS

PIPE NON-METALLIC; UP TO 20 NPS,300 PSIG MAX

SUPPLY,CARBONSTEEL,THERMOPLASTIC LINED PIPING SYSTEMS,FOR CORROSIVE

FLUIDS,ACIDS, ALKALINE,CHEMICAL SOLUTIONS OR OILY DRAINS,01-SAMSS-0256000013900

285 Pipe & OCTGPIPE, NON-METALLIC, ALL SIZES,

FOR WATERPIPE NON-METALLIC; ALL SIZES NPS,POLYPROPYLENE,ASTM F2389,FOR WATER

DISTRBUTION SYSTEMS6000009750

286Pipe & OCTG

(Pipe)

Service: Pre-Engineered

Composite Repair

SERVICE; PRE-ENGINEERED THERMOSET FIBER REINFORCED

COMPOSITETYPE,SAEP-345,ASME-PCC2 ISO 24817,LIMITED TO PIPELINE FOR

WATER,HYDROCARBON, AND CHEMICALS APPLICATIONS. SUITABLE FOR

PIPELINESWITH EXTERNAL CORROSION UP TO 80 PERCENT METAL LOSS. FOR

SABKHAAREA APPLICATIONS, AN EXTERNAL WATER PROTECTION LAYER SHALL

BEADDED ON THE SLEEVE. NOT APPLICABLE FOR FITTINGS SUCH AS ELBOW,TEE,

REDUCER#.ETC. FOR PLANT PIPING, IT SHALL BE UTILIZED AS ATEMPORARY

REPAIR WITH A PRIOR APPROVAL FROM NONMETALLIC SCC.

6000014191

287Pipe & OCTG

(Pipe)

SERVICE: WET -TYPE COMPOSITE

REPAIR EXT.

SERVICE; WET-TYPE THERMOSET COMPOSITE FIBER REINFORCED

OMPOSITE.TYPE,SAEP-345,ASME-PCC2 ISO 24817,USE FOR WATER,

HYDROCARBON,CHEMICALS PLANT PIPING AND PIPELINES. SUITABLE FOR

EXTERNALCORROSION UP TO 80 PERCENT METAL LOSS. FOR PLANT PIPING

ANDFITTINGS, IT SHALL BE UTILIZED AS A TEMPORARY REPAIR WITH APRIOR

APPROVAL FROM NONMETALLIC SCC.

6000014681

288 Pipe & OCTGSERVICE: WET-TYPE; COMPOSITE

REPAIR, INT

SERVICE; WET-TYPE THERMOSET COMPOSITE FIBER REINFORCED TYPE,SAEP-

345,ASME-PCC2 ISO 24817,USE FOR WATER, HYDROCARBON, CHEMICALS PLANT

PIPING AND PIPELINES. SUITABLE FOR INTERNAL CORROSION UP TO 80 PERCENT

METAL LOSS PROVIDED THAT CORROSION SOURCE IS MITIGATED. FOR PLANT

PIPING AND FITTINGS, IT SHALL BE UTILIZED AS A TEMPORARY REPAIR WITH A

PRIOR APPROVAL FROM NONMETALLIC SCC.

6000015710





9COM/9CAT

289 Pipe & OCTGPIPE; NONMETALLIC; CPVC; FOR

FIRE SPRINK

PIPE; PIPE, ANY SIZE TYPE,CHLORINATED POLY VINYL CHLORIDE (CPVC),UL OR

EQUIVALENT CERTIFIED FOR FIRE SPRINKLER SYSTEMS STANDARDS: UL 1887, UL

1821 ASTM D1784, ASTM F442, UL LISTED ADHESIVE, ASTM F493, ASTM F6566000016271

290

Drilling Equipment

(Downhole

Equipment)

KIT,9-5/8",VALVE+GRV

PACKER+SEAL+MFIV

VALVE; MECHANICAL FORMATION ISOLATION TYPE,SIZE 9-5/8 IN,5000PSI

(DIFFERENTIAL PRESSURE) SUPPLY,4140 L-80 BODY,4140 L-80TRIM, 4.562" ID X

8.000" OD (3 FT) EXTENSION, 5,000 PSI BALLDIFFERENTIAL PRESSURE RATING,

300 DEG. F TEMPERATURE RATING,5-1/2" 17 PPF NEW VAM BOX X PIN, AND 106"

OVERALL LENGTH, 1.COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN KITS

SECTION MUSTBE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE

PERSAUDI ARAMCO PACKAGING SPEC 844418. 2. MANUFACTURER MUST

BARCODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDETHE

CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO BEIN THE

INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND ADHERETO ANSI

MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12& 13). BAR CODE

TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBERAND PURCHASE ORDER

NUMBER. ALL ITEMS SHOULD BE ASSEMBLEDTOGETHER PRIOR TO TESTING.KITS

COMPONENTS

1000809798

291

Drilling Equipment

(Downhole

Equipment)

PACKER,ECP,4-

1/2X6.1,NVAM,12.6#,MPAS,MEC

PACKER; MPAS KIT TYPE,4-1/2 IN, FOR 6-1/8 IN OHCONSIST OF:ITEM QUANTITY

DESCRIPTION01 01 Baker M-Pas Mech. External CasingPackerwith bottom

subSize: 4-1/2 IN. 11.6lb/ftThread connection: 4-1/2IN. 12.6# NewVamBox X

BoxElement O.D.: 5.625 IN.Tool I.D.: 3.500 IN.Material: L-80PART# H30158450802

01 Baker Lift Nipples for Mpas PackersSize: 4-1/2 in. 11.6lb/ft, 6 feet longThread

Connection: New Vam Box X PinTool O.D.: 5.000 IN.Tool I.D.: 3.950 IN.Material: L-

80PART# H494079210

1000750621

292

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,9-

5/8X14",VAM21,53.5#,CRA,MDS

K

LINER; TOP PACKER ASSEMBLY TYPE,SIZE 9-5/8 IN 53.5 PPF X 14 IN114

PPF,#CONNECTION : VAM 21.KIT COMPONENTS 1000835538

293

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,VTHC,13.5#CRMO,HYD

PACKER: PRODUCTION, 5.687 IN OD, 3.720IN ID, FOR 7 IN, 32-35 LB/FT

CASINGPACKER PRODUCTION; "S-3" 1-TRIP HYDRO-SET COMP . PACKER

TYPE,FORH2S, CO2,WIRELINE OR HYDRAULIC SET ACTIVATI,5.879 IN OD,3.720

INID,7.000 IN OD,32-35 LB/FT,4-1/2 IN CONNECTN,13.5 LB/FT,VAM TOPHC PIN X

PIN COONECTN,10000 PSI SUPPLY,NACE MR-01-75,MATERIAL:PACKER: 125 KSI

MYS CR-MO LOW ALLOY STEEL PACKING ELEMENT: BPSAFLAS O-RINGS: BPS

AFLAS. TEMPERATURE RATING: 150-350 DEG F.KITS COMPONENTS

1000025107





9COM/9CAT

294

Drilling Equipment

(Downhole

Equipment)

VALVE,ICV,3-

1/2",EUE,CRA,7.5K,FCV-002

VALVE; TUBING RETRIEVABLE FLOW CONTROL-HYDRAULIC TYPE,SIZE 3-1/2IN,3-

1/2 IN 9.3 PPF EUE BOX X PIN END CONN,INC718 BODY,INC718,9CR-1MO,

4140/4130 TRIM,EXTERNAL WORKING PRESSUR: 7500 PSI,INTERNAL DIA.: 2.812

IN MIN, DRIFT ID: 2.808 IN, LENGTH: 219 IN,MAX FLOW RATE: 40000 BBL/DAY,

MAX WORKING TEMP.: 325°F, MINWORKING TEMP.: 40°F, MAJOR OD: 5.850 IN,

SEAL BORE SIZE: 2.812IN, NO. OF BYPASS CONTROL LINES: 4. THE TUBING

RETRIEVABLE FLOWCONTROLLER SYSTEM MUST PROVIDE REMOTELY ACTUATED

DOWNHOLECONTROL OF FLOW FROM THE RESERVOIR. THE SYSTEM MUST BE

OPERATEDBY A 0.25-IN HYDRAULIC CONTROL LINE THAT IS ROUTED FROM

THESURFACE CONTROLS TO THE CHOKE SECTION OF THE TOOL.

1000782175

295

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,4-

1/2X7",NVAM,12.6#,CEMENTED

LINER; CEMENTED, KIT TYPE,4-1/2 IN BOTTOM CEMENTING KIT. FOR 7IN 26 #

CASING AND 6-1/8 IN OPEN HOLECONSIST OF:ITEM QUANTITY DESCRIPTION01 01

Baker #PBR# Style Locator SealAssemblySize: 5.250 IN. X 4-1/2 IN. 11.6lb/ftThread

connection: New Vam Box Up x ½MulshoeLength: 10ft effective Seal

StrokeMaterial: L-80PART# H29755079802 01 Baker Hyflo III Liner Top PackerSize:

5 IN. 18b/ft X 7 IN. 23-29Lb/ftThread: 5 IN. 18lb/ft New Vam Box DownMaterial: L-

80Extension ID: 5-1/4 IN.Tool OD: 6.050 IN.Tool ID: 4.276 IN.Extension Length: 10

feetPART# H29618006603 01 Model #HMC# Liner HangerSize: 4-1/2 IN. X 7 IN. 23-

26#/ftMaterial: BMS # A099Threads: 4-1/2 IN. 12.6#/FT New VamMinimum ID:

4.000 IN.Max OD: 6.000 IN.PART# H292230110Including following items:Flapper

Valve Assembly/Cross OverPART# H282050540Plug Holder BushingPART#

H299940415ITEM QUATITY DESCRIPTION04 01 Baker#PAC# ValveSize: 4-1/2IN. X

12.6 ppfThread: New VamMaterial: L-80Pressure: Field Adjustable, 2000-

3500Temp. Rating: 325 deg.PART# H30112240805 02 Baker #Isozone# External

Casing PackerWith Standard ValveSize: 4-1/2 IN. 12.6 lb/ft.Thread Connection: 4-

1/2 IN. 12.6# NewVam Box X PinElement O.D.: 5.625 IN.Tool I.D.: 3.821

IN.Material: L-80Elastomer Length: 7 ft.PART# H30139241606 01 Baker Landing

CollarSize: 4-1/2 IN. X 12.6 ppfThread: New VamMaterial: L-80O.D.: 4.891 IN.I.D.:

3.937 IN.Seat I.D.: 1.500 IN.PART# H26679007307 01 Liner Wiper plug for PAC

valveNitrile, 4.500 IN. OD 9.500-11.60lb/ftCasing, 4.125 IN.SHAER TAB, 3.678

IN.Stabilizer OD. 1.641 IN. tool IDF/1.812PART# H26932002208 01 Baker Pump

Down PlugSize: 1.844 IN. Nose O.D.Material: NitrileO.D.: 5.130 IN.Max Csg I.D.:

2.00 IN.Max Pressure: 3000 psi @ 350 deg. FPART# H270200056

1000750589





9COM/9CAT

296

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,VTHC,32#,110,HYD

HANGER LINER; HYDRAULIC CONTROL SET FLEX-LOCK TYPE IIIACTIVATI,7 IN END

1,32 PPF END 1,9-5/8 IN END 2,47-58.4 PPF END2,VAM TOP HC PIN X PIN END

CONN,CONTROL SET FLEX-LOK LINERHANGER WITH ZXP TOP PACKER

ASSEMBLY.KIT COMPONENTS

1000889169

297

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,4-

1/2,NVAM,12.6#,250MC,SNDST

SCREEN; RESFLOW INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 4-1/2 IN X40 FT

LG,SS316L,FOR STANDSTONE INSTALLATION, BASE PIPE MATERIAL:L-80, PIPE SIZE:

4-1/2 IN, 12.6 LB/FT, THREAD CONNECTION: NEWVAM, WEIGHT: 17.57 LB/FT,

DISPLACEMENT: 0.35 GAL/FT, AXIAL RODPROFILE: 4.0 X 3.0 MM, NO. OF RODS:

28, WRAP WIRE PROFILE: 4.0 X3.0 MM, SCREEN (WRAPPED) INFLOW AREA:

7.69%, SLOT OPENING: 250MICRONS/0.010 IN, CENTRALIZER PER LOCATION:

ONE/JT @ PIN END,NO. OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE

DIAMETER: 4 MM,NUMBER OF NOZZLES: 4 PER JOINT.

1000778420

298

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,VTHC,32#,718,HYD

HANGER LINER; 7 IN END 1,32 PPF END 1,9-5/8 IN END 2,53.5-58.4 PPF END

2,CORROSION RESISTANT ALLOY MATERIAL, SYSTEM INCLUDES 1/2 IN MULE-

SHOE, WIRELINE ENTRY GUIDE KIT COMPONENTS

1000815460

299

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,NVAM,12.6#,ALLOY,RET

PACKER PRODUCTION; VHR, HYDRAULIC SET RETRIEVABLE TYPE,FOR

H2S,CO2,HYDRAULIC SET ACTIVATI,6.000 IN MAX OD,3.880 IN MIN ID,7 INOD,23-

29 LB/FT,5.250-6RTH-LTH LEFT HAND (TOP) X 4-1/2 IN 12.6#NEW VAM BOX

(BOTTOM) CONNECTN,12.6 LB/FT (BOTTOM),LEFT-HAND(TOP), NEW VAM BOX

(DOWN) COONECTN,6,000 PSI SUPPLY,NACEMR0175,AFLAS ELEMENT AND

VITON/AFLAS O-RINGSKIT COMPONENTS

1000764262

300

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,4-

1/2,NVAM,11.6#,0.014,SNDST


LG,SS 316L,FOR SANDSTONE INSTALLATION, BASE PIPE MAT'L:L-80, PIPE SIZE: 4-

1/2 IN 11.6 LB/FT, THREAD CONNECTION: NEWVAM, WEIGHT: 15.46 LB/FT,

DISPLACEMENT: 0.31 GAL/FT, AXIAL RODPROFILE: 6.2 X 3.2 MM, NO OF RODS: 28,

WRAP WIRE PROFILE: 4.0 X3.0 MM, SCREEN (WRAPPED) INFLOW AREA: 10.45%,

SLOT OPENING: 350MICRONS/0.014 IN, CENTRALIZER PER LOCATRION: ONE/JT @

PIN END,NO OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE DIA: 4MM, NO

OFNOZZLES: 4 PER JOINT

1000790538





9COM/9CAT

301

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,5-

1/2,NVAM,17#,350MC,SNDST

SCREEN; RESFLOW INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 5-1/2 IN X 40 FT

LG,SS316,FOR SANDSTONE INSTALLATION, BASE PIPE MATERIAL: L-80, PIPE SIZE:

5-1/2 IN 17.0 LB/FT, THREAD CONNECTION: NEW VAM, WEIGHT: 21.78 LB/FT,

DISPLACEMENT: 0.42 GAL/FT, AXIAL ROD PROFILE: 4.0 X 3.0 MM, NO OF RODS:

32, WRAP WIRE PROFILE: 4.0 X 3.0 MM, SCREEN (WRAPPED) INFLOW AREA:

9.78%, SLOT OPENING: 350 MICRONS/0.009 IN, CENTRALIZER PER LOCATION:

ONE/JT @ PIN END, NO OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE

DIAMETER: 4 MM, NO OF NOZZLES: 4 PER JOINT

1000788091

302

Drilling Equipment

(Downhole

Equipment)

PIPE,5-1/2",XPC,18.24#,EX-

80,37FT,EXPAND

JOINT; SOLID EXPANDABLE LINER TYPE,SIZE 5-1/2 IN 18.24 PPF X 7 IN 26 PPF,EX-

80,COUPLED WITH CONNECTION SLEEVE, CONNECTION: ENVENTURE

PROPRIETARY XPC PIN X BOX LH, LENGTH: 37 FT

1000819339

303

Drilling Equipment

(Downhole

Equipment)

CONNECTOR,HYD,4-1/2,WET

MATE,2PORT,HNBR

ELEMENT; HYDRAULIC LINE TYPE,SIZE 4-1/2 IN,4140 (L-80),WET MATECONNECT

SYSTEMKITS COMPONENTS 4-1/2 IN HYDRAULIC LINE WET MATECONNECT

SYSTEM CONSISTS OF:ITEM QTY DESCRIPTION01 01 4-1/2" x 9-5/8" HLWM

RECEPTACLE ASSEMBLYMATERIAL: 4140GRADE: L-80WEGHT (APPROX): 600

LBSEXT. WP @ TEMP: 6000 PSI @ 250 DEG FID: 3.958 INID (MIN): 3.943 ININT.

WP @ TEMP: 6000 PSI @ 250 DEG FLOWER THREAD: 4.5-8RD,12.2 PPF, EUE,

PINMAKEUP LENGTH: NAMATERIAL/ELASTOMERS: HNBRMAX. WORKING TEMP:

250 DEG FMIN. WORKING TEMP: 40 DEG FOD: 8.369 INOD (MAX): 8.379

INOVERALL LENGTH: 72 INSERVICE NACE: NOTENSILE STRENGTH: 250,000 LBS @

250 DEG FUPPER THREAD: NAPART NUMBER: 10051791AB02 01 4-1/2" x 9-5/8"

STINGER ASSEMBLYMATERIAL: 4140GRADE: L-80WEGHT (APPROX): 500 LBSEXT.

WP @ TEMP: 6000 PSI @ 250 DEG FID: 3.750 INID (MIN): 3.745 ININT. WP @

TEMP: 6000 PSI @ 250 DEG FLOWER THREAD: NAMAKEUP LENGTH:

NAMATERIAL/ELASTOMERS: HNBRMAX. WORKING TEMP: 250 DEG FMIN.

WORKING TEMP: 60 DEG FOD: 8.369 INOD (MAX): 8.379 INOVERALL LENGTH: 135

INSERVICE NACE: NOTENSILE STRENGTH: 250,000 LBS @ 250 DEG FUPPER

THREAD: 4.5-8RD, 12.2 PPF,EUE, BOX.PART NUMBER: 10051785AB

1000839903





9COM/9CAT

304

Drilling Equipment

(Downhole

Equipment)

KIT,7",VALVE+GRV

PACKER+SEAL+MFIV

VALVE; MECHANICAL FORMATION ISOLATION TYPE,SIZE 7 IN,5000

PSI(DIFFERENTIAL PRESSURE) SUPPLY,4140 L-80 BODY,4140 L-80TRIM,2.940" ID X

5.500" OD (3 FT) EXTENSION, 5,000 PSI BALLDIFFERENTIAL PRESSURE RATING,

300 DEG. F TEMPERATURE RATING,4-1/2" 13.5 PPF NEW VAM BOX X PIN, AND

106" OVERALL LENGTH, 1.COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN

KITS SECTION MUSTBE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND

STORAGE PERSAUDI ARAMCO PACKAGING SPEC 844418. 2. MANUFACTURER

MUST BARCODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND

OUTSIDETHE CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO

BEIN THE INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND

ADHERETO ANSI MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12&

13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBERAND

PURCHASE ORDER NUMBER. ALL ITEMS SHOULD BE ASSEMBLEDTOGETHER PRIOR

TO TESTING.KITS COMPONENTS

1000809797

305

Drilling Equipment

(Downhole

Equipment)

PIPE,16",XPC,75#,LSX80,ERW,37F

T,EXPN,SES

UNIT; EXPANDABLE, SOLID, ERW TYPE,COMPLETE ASSEMBLY MUST BEBOXED AS

AN INDIVIDUAL UNIT FOR SHIPMNET AND STORAGE.MANUFACTURER MUST BAR

CODE IDENTIFY EACH ISSUE UNIT ON BOTH THEMATERIAL AND OUTSIDE THE

CONTAINER IN WHICH THE ISSUE UNIT ISCONTAINED. CODE TO BE IN THE

INTERNATIONAL CODE 39 BAR CODINGSYSTEM FORMAT AND ADHERE TO ANSI

NH10.8M (LATEST EDITION)SPECIFICATION (LESS SECTIONS 12 & 13) BAR CODE

MUST INDLUDE THESAUDI ARAMCO STOCK NUMBER AND PURCHASE ORDER

NUMBER, PACKAGINGSPEC 844418 APPLIES.KITS COMPONENTS

1000840031

306

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,4-


SCREEN; FLOREG INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 4-1/2 IN XR3,L-

80,FOR SANDSTONE INSTALLATION, SIZE: 4-1/2 IN 11.6 LB/FT,THREAD

CONNECTION: NEW VAM BOX X PIN, FILTER: CSM IN SS 316,JACKET LENGTH: 16

FT (SINGLE MODULE), MAX OD: 5.400 IN, MIN. ID:3.958 IN,

1000794601

307

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,4-

1/2,NVAM,11.6#,SCOARSE,SND

SCREEN; BAKER EQUALIZER TYPE,SIZE 4-1/2 IN, 11.6 LB/FT, 37 FEETLONG,L-80

PIPE AND ICD, 316L/304SS SCREEN,THREAD CONNECTION: NEWVAM BOX X PIN,

EXCLUDER 2000 COARSE 16.5 FT SINGLE CARTRIDGE,RESTRICTOR MODULE: 23 PSI

AT 171 STB/DAY, TOOL O.D.: 5.300 IN,TOOL I.D. : 4.000 IN

1000750624





9COM/9CAT

308

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,4-

1/2X5.60",VTHC,13.5#,110

PACKER; SWELLABLE, ISOLATION TYPE,PACKER TYPE: SWELLPACKER OS H2S.

PACKER DIMENSIONS: 4.5 IN X 5.60 IN X 9 M. DELAY SYSTEM: 6 A. SWELL

MEDIUM: OILSWELLING. TEMPERATURE UP TO 392 DEG F. TOTAL LENGTH: 40 FT.

MIN HANDLING SPACE PIN END: 2 FT. MIN HANDLING SPACE BOX END: 6 FT.

PACKER ELEMENT LENGTH: 30 FT. BASE PIPE OD: 4.5 IN. PACKER ELEMENT OD:

5.6 IN. END-RING OD: 5.6 IN. BASE PIPE WEIGHT: 13.5 PPF. BASE PIPE MATERIAL:

P-110. BASE PIPE NOMINAL ID: 3.920 IN. BASE PIPE DRIFT ID: 3.795 IN. THREAD

TYPE: VAM TOP HC. END RING MATERIAL: ST-52. END RING LENGTH: 4 IN.

1000908558

309

Drilling Equipment

(Downhole

Equipment)

PACKER,LINER,4-

1/2,NKS3B,13.5#,TBR 25FT

PACKER, LINER: 'ZXP' LINER TOP, (BMSA-142)41XX-HC110 MYS, HT SOUR

SERVICE,25 FT TIE-BACK, 7 IN CASING OD, 29-32PACKER LINER; 'ZXP' LINER TOP

TYPE,(BMS A-142)41XX-HC110 MYS,FORHT SOUR SERVICE,25 FT TIE-BACK,7 IN

OD,29-32 LB/FT,NK-3SB BOXDOWN COONECTN,4-1/2 IN 13.5 LB/FT BOX DOWN

CONNECTN,NACEMR-01-75 97,WITH HOLD DOWN SLIPS, HR PROFILE AND XYLAN-

1052COATED, 6 IN MIN IDKITS COMPONENTS

1000644366

310

Drilling Equipment

(Downhole

Equipment)

ICD,4-1/2",NVAM,11.6#,6-

1/8"OH,CARBO

EQUALIZER; NT TI TASKING VALVE (MTV), CF TYPE,HYDRO MECHANICALICD

(SPIRAL MODULE). ICD TYPE: HELICAL CHANNELS WITH MTV SYSTEM.ICD FLOW

RESISTANCE RATE: 1.9 FRR. RESTRICTOR MODULE: 90 PSI AT300 STB/DAY. MAX

OD: 5.630 IN. MIN ID: 3.510 IN. OPENINGMECHANISM: SHEAR WIRES. SETTING

TOOL REQUIRED: NONE. OPEN HOLESIZE: 6-1/8 IN. CONNECTIONS: 4-1/2 IN, 11.6

PPF, NEW VAM BOX XPIN. DEBRIS BARRIER MATERIAL: 316L STAINLESS STEEL.

HELIXMATERIAL: 13 CR. WORKING TEMPERATURE: 200 DEG F. SHEAR

VALUE:2,400 PSI.

1000839814

311

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,14X18-

5/8,TB,114#,T95,MEC

HANGER LINER; 14 IN END 1,18-5/8 IN END 2,136 PPF END 2,TENARISBLUE

DOPELESS,14 IN, 114 PPF X 18-5/8 IN, 136 PPF CSG LINERHANGER AND

ACCESSORIESKIT COMPONENTS

1000830809





9COM/9CAT

312

Drilling Equipment

(Downhole

Equipment)

LATERAL,9-5/8X7,LEVEL

4,3DEG,MILLRITE

LATERAL; 'MILLRITE' SYSTEM TYPE,9-5/8 IN NPS,3° DEG,LEVEL 4MULTILATERAL

EQUIPMENT. ALL ITEMS SHOULD BE ASSEMBLED TOGETHERPRIOR TO

TESTING.KITS COMPONENTSITEM QTY DESCRIPTION01 01 EA WHIPFACE:

#LATCHRITE# DRILLING;FOR 9-5/8 IN 47 PPF, 8.500 IN DRILLOUT,TOTAL LENGTH:

389.46 IN,DEBRIS BARRIER OD: 8.988 IN,MAX OD (CENTRALIZER PAD): 8.480

IN,WHIP BODY OD: 7.250 IN,WHIP BORE ID: 4.000 IN,MIN. ID (FLAPPER VALVE):

2.060 IN,WHIPFACE TAPER ANGLE: 3.00OPART NUMBER: 31491702 01 MILL:

WINDOW AND GAUGE, #LATCHRITE#;9-5/8 IN 40-47 PPF,TOTAL LENGTH: 73.83

IN,MAX OD: 8.500 IN,MIN. ID: 2.500 IN,TOP CONNECTION: API 4.5 in IF

PIN,TENSILE STRENGTH (4-1/2 THREAD): 1,017,426 LBS,TORSIONAL LOAD: 18,000

LBS,TORSIONAL YIELD: 20,000 LBS,FLOW AREA (THRU MILL): 0.59 IN2ASSEMBLY

WEIGHT: 543 LBS,PART NUMBER: 10149711/10156026403 01 JOINT:

TRANSITION, 7 IN 29 PPF, NVAM;TOTAL LENGTH: 316.53 IN, (8.04 M),MAX OD

(CENTRALIZER): 8.500 IN,BODY OD: 7.250 IN,MIN ID (SETTING SLEEVE): 6.130

IN,CASING WEIGHT: 23.200 PPF,CASING GRADE: L-80,TENSILE STRENGTH: 145,000

LBS,RUNNING TOOL:MAX OD: 8.450 IN,MIN ID (CONNECTOR): 2.625

IN,MATERIAL: 4145H MOD,TENSILE STRENGTH: 143,500 LBS,04 01 SHOE: FLOAT;

7 IN 26 PPF, NVAM,SUPER SEAL II,OD: 7.656 IN,ID: 6.276 IN,DRIFT: 6.125

IN,LENGTH: 2 FT.05 01 COLLAR: FLOAT; 7 IN 26 PPF,NVAM LATCHRITE,SUPER SEAL

II,OD: 7.656 IN,ID: 6.276 IN,DRIFT: 6.125 IN,LENGTH: 2 FT,06 01 WASHOVER

SHOE: 9-5/8 IN 47 PPF,TOTAL LENGTH: 301.11 IN,LENGTH OF CROSSOVER: 32.300

IN,LENGTH OF WASHOVER PIPE: 232.310 IN,LENGTH OF SHOE ASSEMBLY: 36.500

IN,THREADS TO BOTTOM: 9.060 IN,MAX OD (SHOE BOTTOM): 8.490 IN,MIN ID

(WASHOVER SUB): 3.000 IN,CONNECTION: API 4.5 in IF BOX,ASSEMBLY WEIGHT:

1400 LBS.PART NUMBER: 286179

1000817064

313

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,9-

5/8X14,FJL,53.5#,625,HYD

HANGER LINER; HYDRAULIC ACTIVATI,9-5/8 IN END 1,53.5 PPF END 1,14 IN END

2,114 PPF END 2,VAM FJL KIT COMPONENTS 1000835539

314

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,VTHC,10K,HYD,1TRIP

PACKER PRODUCTION; "THT", PERMANENT

TYPE,HYDRAULICACTIVATI,CUSTOMIZED BUNDLE, POLISHED BORE RECEPTACLE

WITH SEALUNIT, THT HYDRAULIC-SET, MULESHOE RE-ENTRY GUIDE.1000792070





9COM/9CAT

315

Drilling Equipment

(Casing Accessories &

Cementing

Equipment)

DV TOOL,13-3/8",BTC,61-

72#,L80,MEC,3K

COLLAR: PACKER; INFLATABLE ASSY; FOR13-3/8 IN. OD 61.0 - 72.0 LB/FTCASING;

API-5B BUTTRESS BOX AND PIN;COLLAR PACKER; INFLATABLE TYPE,FOR

CEMENTING H2S,MULTISTAGE,L-80 CASING,13-3/8 IN INSIDE O,61.0-72.0

LB/FT,BUTTRESSBOX & PIN THD TERMINAL,16-3/4 IN TOOL OD,12.3590 IN ID

DRILLOU,19-1/2 IN EXPANSIO,BOTTOM PLUG 1ST,FREE FALL PLUG 2ND,API 5B,API

5AC,FREE FALL PLUG SET CONSISTS OF SHUT-OFF BAFFLE & PLUGAND OPENING &

CLOSING PLUG, BOTTOM PLUG SET CONSISTS OF BY-PASSBAFFLE & PLUG,

PACKED TO CUSTOMER SPECS, CONTROLLED HARDNESS API5ACKITS

COMPONENTS

1000022920

316

Drilling Equipment


Cementing

Equipment)

DV TOOL,13-3/8",BTC,48-

68#,L80,MEC,4FT

COLLAR: PACKER; INFLATABLE, MODEL (781 POST), WITH 4 FTELEMENT, FOR 13-

3/8 IN 48-68 LB/FT CASING, WITH BTCTHREAD, BOX x PINCOLLAR PACKER;

INFLATIBLE TYPE,FOR CEMENTING,MULTI STAGE,L-80CASING,13-3/8 IN INSIDE

O,48-68 LB/FT,18-5/8 IN OUTSIDE,115LB/FT OUTSIDE,BTC BOX X BTC PIN THD

TERMINAL,15.500 IN TOOLOD,12.250 IN ID DRILL OU,19 IN

EXPANSIO,DISPLACEMENT PLUG2ND,API 5D,EACH POST TOOL MUST BE BOXED

AS INDIVIDUAL UNITS FORSHIPMENT AND STORAGE.KITS COMPONENTS

1000644503

317

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,VTHC,32#,41XX,HYD

HANGER, LINER: HYDRAULIC-ROTATING ACTIVATION, HT SOUR SERVICE, (BMS A-

142) 41XX-HC110 MYS, 4 IN END 1, 32 0 HANGER LINER; HYDRAULIC-ROTATING

ACTIVATI,FOR HT SOUR,GR (BMS A-142) 41XX-HC110 MYS,4 IN END 1,32.0 LB/FT

END 1,9-5/8 IN END 2,43.5-58.4 LB/FT END 2,7 IN END CONN,7 IN 32 LB/FT VAM

TOP HC PIN X PIN,C-110 EQUIVALENT - NACE TEST TM0177 WAIVED,6.074 IN MIN

ID, GEN-2. HANGER AND ITS COMPONENTS SHOULD BE BOXED TOGETHER. KITS

COMPONENTS

1000644360

318

Drilling Equipment

(Downhole

Equipment)

KIT,TIEBACK,7",VTHC,32#,625,PK

RSEAL,MDSK

PACKER LINER; JMZXDG TYPE,NICKEL ALLOY 625 PLUS,8.312 IN OD,7 IN LINER

OD,32 PPF LINER,9-5/8 IN OD,47.0 - 53.5 PPF,8.375 IN EXT OD,6.039 IN EXT

ID,VAM TOP HC BOX UP X MULESHOE DOWN COONECTN,7 IN 32 PPF

CONNECTN,7 IN X 9-5/8 IN 58.4 PPF UPPER COMPLETION FOR HASBAH

INCREMENT. KIT COMPONENTS

1000891632





9COM/9CAT

319

Drilling Equipment


Cementing

Equipment)

DV TOOL,18-

5/8",BTC,115#,K55,MEC

COLLAR: PACKER; INFLATABLE ASSY;INFLATABLE: FOR 18-5/8 IN. OD 115.0LB/FT;

CASING W/API 5B BUTTRESS THREADCOLLAR PACKER; INFLATABLE TYPE,FOR

CEMENTING,MULTI STAGE,K-55CASING,18-5/8 IN INSIDE O,115.0 LB/FT,24 IN

OUTSIDE,176.0 LB/FTOUTSIDE,BUTTRESS BOX & PIN THD TERMINAL,20-4/5 IN

TOOLOD,17.3750 IN ID DRILL OU,24 IN EXPANSIO,BOTTOM PLUG 1ST,FREEFALL

PLUG 2ND,API 5B,FREE FALL PLUG SET CONSISTS OF SHUT-OFFBAFFLE & PLUG

AND OPENING & CLOSING PLUG, BOTTOM PLUG SETCONSISTS OF BY-PASS

BAFFLE & PLUG, PACKED TO CUSTOMER SPECSKITS COMPONENTS

1000022922

320

Drilling Equipment


Cementing

Equipment)

DV TOOL,13-3/8",VAM

TOP,72#,C95HCHS,4FT

COLLAR: PACKER; INFLATABLE, MODEL 781POST F/13-3/8 IN OD 72 LB/FT CASING,

W/4 FT ELEMENT, VAM TOP THREAD, BOX X PINCOLLAR PACKER; INFLATABLE

TYPE,FOR CEMENTING,MULTISTAGE,C-95HCCHS CASING,13-3/8 IN INSIDE O,72

LB/FT,18-5/8 INOUTSIDE,115 LB/FT OUTSIDE,VAM TOP BOX & VAM TOP PIN

THDTERMINAL,15.875 IN TOOL OD,12.25 IN ID DRILL OU,18.5 - 20.20

INEXPANSIO,AS PER THREAD MANUFACTURER'S SPECS,EACH POST TOOL MUSTBE

BOXED AS INDIVIDUAL UNITS FOR SHIPMENT AND STORAGE. THIS TOOLDOES

NOT HAVE A PLUG SET WITH IT. PACK TO SAUDI ARAMCOSPECIFICATIONKITS

COMPONENTS

1000024890

321

Drilling Equipment


Cementing

Equipment)

DV TOOL,9-5/8",LTC,29.3-

40#,P110,MEC

COLLAR: PACKER; INFLATABLE ASSY;INFLATABLE; F/9-5/8 IN. OD 29.3 TO 40LB/FT

CASING; W/API 5B LTC THREAD;COLLAR PACKER; INFLATABLE TYPE,FOR

CEMENTING,MULTI STAGE,P-110CASING,9-5/8 IN INSIDE O,29.3-40.0 LB/FT,13-

3/8 INOUTSIDE,61.0-72.0 LB/FT OUTSIDE,8RD LTC BOX & LTC PIN

THDTERMINAL,11-3/4 IN TOOL OD,8.9270 IN ID DRILL OU,14

INEXPANSIO,BOTTOM PLUG 1ST,FREE FALL PLUG 2ND,API 5B,FREE FALLPLUG SET

CONSISTS OF SHUT-OFF BAFFLE & PLUG AND OPENING &CLOSING PLUG,

BOTTOM PLUG SET CONSISTS OF BY-PASS BAFFLE & PLUG,PACKED TO CUSTOMER

SPECS, WITH RUPTURE DISC ASSEMBLY HALLIBURTONP/N 100075423 (OLD PART

NO 813.30290)KITS COMPONENTS

1000024738

322

Drilling Equipment

(Downhole

Equipment)

WHIPSTOCK,7",5.375,23-

35#,HYD,PKR,3.0DG

WHIPSTOCK:7 IN OD, HYDRAULIC SET,RETRIEVABLE TRACKMASTER ONE TRIP SIDE-

TRACKING SYSTEM, FOR 7 IN 23-35 LB/FTCASING.WHIPSTOCK; HYDRAULIC SET,

RETRIEVABLE TRACKMASTER ONE TRIPSIDE-TRACKING SYSTEM TYPE,7 IN BODY

STD,ONE TRIP-SIDE TRACKINGSYSTEM TRIP,5-3/8 IN OD, COMPLETE WITH

TRACKMASTER SLIDE WITH 3DEGREES FACE WITH HOOK RETRIEVING SLOT AND

HYDRAULIC RETRIEVABLEPACKER, FOR 7 IN 23-35 LB/FT CASING.------

1000709228





9COM/9CAT

323

Drilling Equipment

(Advanced Well

Completion

Equipment)

PDHMS,4-1/2,NVAM,DUAL

GAUGE

ASSEMBLY; MONITORING TYPE,DOWN HOLE, 4-1/2 IN, DUAL, PERMANENT KIT

COMPONENTS1000754847

324

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,4-

1/2",BLADERUNNER,5.625"OD

CENTRALIZER CASING; BLADE RUNNER TYPE,4-1/2 IN X 5-7/8 IN (OD5-5/8 IN)

CASING,TYPE: SOLID BODY, SLIP ON. BLADES: 5 X SPIRALRIGHT HAND. MATERIAL:

ZINC-ALLOY/TEFLON. WEIGHT (KG): 4.40.FLOW-BY (SQ INS): 6.41.

MANUFACTURING PROCESS: DIE CAST.

1000886008

325

Drilling Equipment

(Downhole

Equipment)

KIT,VALVE,ISOL,5-

1/2",VTOP,13CR+TOOL+JTS

VALVE BALL; SIZE 5-1/2 IN,5000 PSI SUPPLY,VAM TOP PIN ENDCONN,13CR AISI

420 MOD 80 KSI MYS BODY,ACTUATED OPERATED,VALVEOD (IN): 8.200. VALVE ID

(IN): 4.625. SEAL BORE ID (IN): 6.000.WORKING PRESSURE (PSI): 5,000. TEST

PRESSURE (PSI): 6,250. YIELDPRESSURE RATING (PSI): 6,250 (BURST), 5,000

(COLLAPSE). WORKINGTEMPERATURE (°F): 35-300. BALL DIFFERENTIAL PRESSURE

FROMABOVE/BELOW (PSI): 5,000. DIFFERENTIAL OPENING RATING (PSI):1,000.

VALVE METALLURGY: 13CR AISI 420 MOD 80 KSI MYS. VALVESEALS: NON-

ELASTOMERIC. RUNNING PULLING TOOL (RPT): H826700001.RPT METALLURGY:

LOW ALLOY STEEL, 80KSI MYS. SHEAR VALUE: 60KLBSTO RELEASE. RPT PACKING

UNIT: BONDED NITRILE. PRODUCTIONSHIFTING TOOL (PST): H826710001. PST

METALLURGY: 13CR AISI 420MOD 80 KSI MYS. PST PACKING UNIT: A-RYTE

(AFLAS). TSOJMETALLURGY: LOW ALLOY STEEL, 80KSI MYS. TSOJ ELASTOMERS:

NOSEALS WITHIN TSOJ.KIT COMPONENTS

1000885079

326

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,5-



LG,SS316L,FOR SANDSTONE INSTALLATION, BASE PIPE MATERIAL:L-80, PIPE SIZE:

5-1/2 IN, 20.0 LB/FT, THREAD CONNECTION: NEWVAM, WEIGHT: 26.64 LB/FT,

DISPLACEMENT: 0.50 GAL/FT, AXIAL RODPROFILE: 4.0 X 3.0 MM, NO. OF RODS:

32, WRAP WIRE PROFILE: 4.0 X3.0 MM, SCREEN (WRAPPED) INFLOW AREA:

6.98%, SLOT OPENING: 225MICRONS/0.009 IN, CENTRALIZER PER LOCATION:

ONE/JT @ PIN END,NO. OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE

DIAMETER: 4 MM,NUMBER OF NOZZLES: 4 PER JOINT.

1000778519





9COM/9CAT

327

Drilling Equipment

(Advanced Well

Completion

Equipment)

CABLE,DOWNHOLE,18AWG,1/4",

INC825,1FT

CABLE; PERMANENT DOWNHOLE TYPE,18 AWG DIA,TIN COATED COPPER,1.16

MM OD,1000 VDC, WITH T-05 DIELECTRIC 2.60 MM OD, TYPE-06FILLER, 4.57 MM

OD, TYPE 825 INCOLOY ALLOY TUBE 0.035 IN WALLTHK, 6.35 MM OD TYPE

POLYAMIDE NYLON JACKET, 11 MM X 11 MM SIZE,ELECTRICAL CHARACTERISTICS:

DC RESISTANCE AT 20 DEG C CENTERCONDUCTOR: 21.06 OHMS/KM,

CAPACITANCE CENTER CONDUCTOR TO TUBE:99 PF/M, INSULATION RESISTANCE

AT 20C CENTER CONDUCTOR TO TUBLE:2900 MEG-OHM/KM.

1000839686

328

Drilling Equipment

(Advanced Well

Completion

Equipment)

SCREEN,EXPAND,4",MKI,230MIC,

INC825,SNDST

SCREEN; EXPANDABLE SAND (ESS), CORROSION RESISTANT TYPE,SIZE

4IN,INCOLOY 825,WITH 230 MICRON WEAVE SIZE, JOINT (SCREEN)LENGTH: 38 FT,

BASE PIPE DIA: 4 IN, BASE PIPE MATERIAL: ALLOY28, WITH MK I ESS BOX X PIN

CONNECTIONS. 1- COMPLETE ASSEMBLYMUST BE BOXED AS AN INDIVIDUAL UNIT

FOR SHIPMENT AND STORAGE PERSAUDI ARAMCO PACKAGING SPEC 844418. 2-

MANUFACTURER MUST BARCODE IDENTIFY EACH ISSUE UNIT ON BOTH THE

MATERIAL AND OUTSIDETHE CONTAINER IN WHICH THE ISSUE UNIT IS

CONTAINED CODE TO BE INTHE INTERNATIONAL CODE 39 BAR CODING SYSTEM

FORMAT AND ADHERE TOANSI MH10.8M (LATEST EDITION) SPECIFICATION (LESS

SECTIONS 12 &13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK

NUMBER ANDPURCHASE ORDER NUMBER. 3- ALL ITEMS SHOULD BE ASSEMBLED

TOGETHERPRIOR TO TESTING.

1000804355

329

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,5-

1/2,NVAM,17#,350MC,SNDST

SCREEN; FLOREG ICD WITH 350 MICRON DIRECT WRAP SCREEN TYPE,SIZE 5-1/2

IN,SS316L,GRADE: L-80, BASE PIPE SIZE: 5-1/2 IN, BASE PIPE MATERIAL: SS316L,

WITH SLOT AT 0.014 IN GAUGE OPENING (SLOT TOLERANCE +0.002 IN, -0.003 IN).

BASE PIPE WEIGHT: 17 PPF, BASE PIPE GRADE: L-80, CONNECTION: NEW VAM PIN

X BOX AT 38 FT (+0, -1 FT). SCREEN LENGTH AT 16 FT WITH IN –FLOW CONTROL

DEVICE. HOUSING RETAINING RING: 316L, HOUSING: 13CR-80KSI, FLOW RING:

316L, THREADED RING: 316L, FLOW PORT MATERIAL: TUNGSTEN CARBIDE, SET

SCREW (5/16 UNF): 316L, O-RING: VITON, DIRECT WRAP TENSILE: 337,000 LBS,

DIRECT WRAP TORQUE: 33,000 FT-LBS, DIRECT WRAP BURST: 3,555 PSI, DIRECT

WRAP COLLAPSE: 4,535 PSI.

1000840975





9COM/9CAT

330

Drilling Equipment

(Downhole

Equipment)

VALVE,ICV,3-

1/2",NVAM,9.2#,13CR,HCM-A

VALVE; HCM-A TYPE,SIZE 3-1/2 IN,7500 PSI SUPPLY,3-1/2 IN. 9.2PPF NEW VAM

BOX X PIN END CONN,13CR/INC 718/925/825 & TUNGSTENCARBIDE BODY,MAX

OD: 5.850 IN, MIN ID: 2.812 IN, LENGTH: 102 IN,MAX WORKING TEMP.: 40-

325OF, CONTROL CHAMBER PRESS. RATING:10000 PSI, RUPTURE DISC PRESSURE:

9,000 PSI, INCREMENTALPISTONDISPLACEMENT: 19 ML MAX, VALVE IS CAPABLE

OF HAVING 8 TO 12CHOKING POSITIONS INCLUDING THE FULLY OPEN AND FULLY

CLOSEDPOSITION. THE DESIGN ALSO PROVIDES THE ABILITY TO MOVE TO

THEFULLY CLOSED POSITION WITH A HYDRAULIC PRESSURE APPLICATION TOTHE

CLOSE PORT. VALVE SHALL BE CAPABLE TO "PROGRESSIVELY OPEN"WITH RAPID

CLOSURE.

1000782380

331

Drilling Equipment

(Downhole

Equipment)

PACKER,LINER,7",NK3SB,29#,41X

X,TBR 15FT

PACKER, LINER: ZXP, (BMS A-142)41XX-HC110 MYS, HT SOUR, 15 FT X 7 50 IN 29

LB/FT TIE-BACK, 7 IN LINER PACKER LINER; ZXP TYPE,(BMS A-142)41XX-HC110

MYS,FOR HT SOUR,15 FT X 7.50 IN 29 LB/FT TIE-BACK,7 IN LINER OD,29 LB/FT

LINER,9-5/8 IN OD,47.0-53.5 LB/FT (ALSO 58.4 LB/FT SPECIAL DRIFT),7.5000 IN

EXT OD,NK-3SB BOX DOWN COONECTN,7 IN 29 LB/FT CONNECTN,(C-110

EQUIVALENT-NACE TEST TM0177 WAIVED),WITH HOLD DOWN SLIPS AND HR

PROFILE, XYLAN-1052 COATED, 6.276 IN MIN ID. ELEMENT RATING:10,000 PSI

KITS COMPONENTS

1000644357

332

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,4-

1/2X7",NK3SB,13.5#,CRA

LINER; DEPLOYMENT, KIT TYPE,LINER DEPLOYMENT KIT FOR 4-1/2 INEXCLUDER

SCREENKITS COMPONENTS: CONSIST OF:ITEM QUANTITY DESCRIPTION01 01

Baker Model ZXP-Flexlock #Liner Packerwith 15ft. 5-1/4 IN. Tie-back sleeve(HR

profile)Size: 7 IN. 32 lb/ft.Threads: 5 IN. 18lb/ft NT-3SB PinTool O.D.: 5.875

IN.Tool I.D.: 4.250 IN.Material: S13Cr 95-110 KSIXylan 1052 Co aledHanging

Capacity: 380,000#Pressure Rating: 10,000 psiPART# H29316011002 01 Baker

Casing SubSize: 5 IN. 18lb/ft X 4-1/2 13.5lb/ftThread Connection Up: 5 IN. 18

lb/ftTN-3SB Box TOPThread Connection Down: 4.5 IN. 13.5Lb/ft TN-3SB PinTool

O.D.: 5.000 IN.Tool I.D.: 3.820 IN.Material: S13Cr-95PART# H29989383003 01

Baker#Magnum# Dual Acting DiscSize: 4-1/2 IN. 13.5 lb/ftThread Connection: TN-

3SBTool O.D.: 5.300 IN.Tool I.D.: 3.877 IN.Material: Super 13Cr 95 KSIPressure

Rating: 10,000 psiPART# SAP1016706504 01 Baker Bull PlugSize: 4-1/2 IN.Thread:

4.5 IN. 12.60 lb/ft TN-3SB BOXTool O.D.: 5.000 IN.Material: Super 13Cr-95

KSIPART# H485304566

1000751501





9COM/9CAT

333

Drilling Equipment

(Downhole

Equipment)

PACKER,ISOL,4-

1/2X7"OH,NK3SB,MPAS,13CR

PACKER PRODUCTION; MECHANICAL TYPE,HYDRAULIC SET ACTIVATI,5.000IN

(MAX) OD,2.897 IN (MIN) ID,S13% CR MODEL "MPAS" OPEN HOLEMECHANICAL

PACKER, SIZE: 4-1/2 IN X 5 IN OD, SETTING MECHANICSM:HYDRAULIC SETTING

TOOL REQUIRED: WORKING SHIFTING TOOL, OPENHOLE RANGE: 5-7/8 IN X 7 IN,

CONNECTION: 4-1/2 IN 13.5 LBTENARIS 3SB BOX X PIN, MATERIAL: SUPER 13CR,

95 KSI MYS, ELEMENTELASTOMER: NITRILE, TEMPERATURE RATING: 300 DEG F,

TENSILERATING: 246000 LBS

1000827889

334

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,5-

1/2,NVAM,17#,COARSE,SNDST

SCREEN; BAKER EQUALIZER TYPE,SIZE 5-1/2 IN, 17 LB/FT, 37 FEET LONG,L-80 PIPE

AND ICD, 316L/304SS SCREEN,THREAD CONNECTION: NEW VAM BOX X PIN,

EXCLUDER 2000 COARSE 16.5 FT SINGLE CARTRIDGE, RESTRICTOR MODULE: 23

PSI AT 171 STB/DAY, TOOL O.D.: 6.520 IN, TOOL I.D. : 4.892 IN

1000750623

335

Drilling Equipment

(Downhole

Equipment)


38#,HYD,2.0DG,TT

WHIPSTOCK; THROUGH TUBING TYPE,3-5/8 IN OD BODY STD,RETRIEVABLETRIP,7

IN CSNG DRE,32-38 LB/FT CSNG DRE,15 FT LONG, 2.00 INSCOOP RADIUS. THE

WHIPSTOCK ANCHOR IS FIRMLY SET BY UTILIZING ASIZE 10 E-4 WIRELINE

PRESSURE SETTING ASSEMBLY OR A SIZE 10 JHYDRAULIC SETTING TOOL. 1- ITEMS

MUST BE BOXED AS PER SAUDIARAMCO PACKAGING SPEC 844418. 2-

MANUFACTURER MUST BAR CODE/IDENTIFY EACH ISSUE UNIT ON BOTH THE

MATERIAL AND OUTSIDE THECONTAINER (IN WHICH THE ISSUE UNIT IS

CONTAINED). CODE TO BE INTHE INTERNATIONAL CODE 39 BAR CODING SYSTEM

FORMAT AND ADHERE TOANSI MH10.8M (LATEST EDITION) SPECIFICATION (LESS

SECTIONS 12 &13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK

NUMBER ANDPURCHASE ORDER NUMBER. ALL ITEMS SHOULD BE ASSEMBLED

TOGETHERPRIOR TO TESTING.

1000804765

336

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,4-

1/2X7,NK3SB,13.5#,CRA,HYD

HANGER, LINER: HYDRAULIC-ROTATINGACTIVATION, HT SOUR SERVICE, (BMSA-

142) 41XX-HC110 MYS, 4-1/2 IN END 1,HANGER LINER; HYDRAULIC-ROTATING

ACTIVATI,FOR HT SOUR,GR (BMSA-142) 41XX-HC110 MYS,4-1/2 IN END 1,13.5

LB/FT END 1,7 IN END2,29-32 LB/FT END 2,4-1/2 IN END CONN,4-1/2 IN 13.5

LB/FTNK-3SB,T-95 EQUIVALENT-NACE TEST TM0177 WAIVED,FOR KHUFF GEN-

2.AND JOINT COLLAPSE PRESSURE, 10,710 PSI MIN BODY AND JOINT

BURSTPRESSURE: 364,000 LBS. BODY AND JOINT TESNILE STRENGTH. KHUFFLINER

HANGER SYSTEM COMPLETE ASSEMBLY. MUST BE BOXED AS ANINDIVIDUAL UNIT

WITH ITS COMPONENTS AS LISTED BELOWKITS COMPONENTS

1000644367





9COM/9CAT

337

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,5-

1/2,NVAM,17#,FLOREG,SNDST

SCREEN; FLOREG INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 5-1/2 IN XR3,L-

80,FOR SANDSTONE INSTALATION, MAT'L: L-80, FILTER: CSM INSS 316L, PIPE SIZE:

5-1/2 IN 17.0 LB/FT, THREAD CONNECTION: NEWVAM BOX X PIN, JACKET

LENGTH: 16 FT (SINGLE MODULE), MAX OD:6.500 IN, MIN ID: 4.892 IN

1000794602

338

Drilling Equipment

(Downhole

Equipment)

PACKER,ECP,6.125x4-

/2,NVAM,12.6#,MECH

PACKER PRODUCTION; OPEN HOLE, MECHANICAL TYPE,FOR STANDARD,5.625IN

(MAX) OD,3.500 IN (MIN) ID,SIZE: 6-1/8 IN, MATERIAL: VAM,AMBIENT), MAX SET

DOWN/PULL UP DURING RIH: L-80, LENGTH: 176.500IN, 100000 LBS, HOLE SIZE

(ID): THREAD UP: 4-1/2 IN OD 12.6 6.00TO 7.00 IN ROUND HOLE LB/FT NEW VAM

BOX THREAD & 6.30 IN X 7.00IN OVAL DOWN: 4-1/2 IN OD 12.6 HOLE, RELEASE

SLEEVE SHEAR LB/FTNEW VAM PIN, BASE MATERIAL : AISI 4140 (18-22 SCREW

RTG: 4250 TO5750 HRC), ELASTOMERS : HNBR CUP LBS, MAX BYPASS FLOW RATE:

5BBL/MIN (WATER), TORQUE SEAL, HNBR O-RINGS, DESIGN RATING THRUTOOL:

3000 FT VERIFICATION : ISO 14310 LBS. V3, QUALITY CONTROLGRADE : Q3,

WEIGHT OF TOOL: 510 LBS (185 KG), DIFFERENTIALPRESSURE RATING : 2000 PSI ,

BURST RATING OF TOOL: 3000 PSI,COLLAPSE RATING OF TOOL: 3000 PSI,

HYDROSTATIC SETTING PRESSURERANGE : 2600 TO 6500 PSI, OPERATING

TEMPERATURE :20 TO 110 DEGC, RUNNING TEMPERATURE :20 TO 110 DEG C,

TENSILE RATING: 193358LBS (MAIN MANDREL), COMPRESSION RATING: 115000

LBS (40% NEW

1000827791





9COM/9CAT

339

Drilling Equipment


Cementing

Equipment)

DV TOOL,9-

5/8",NK3SB,53.5#,T95,MEC,HTHP

CEMENTER; POST HTHP TYPE,9-5/8 IN OD,53.5 LB/FT WT,TENARIS 3SB

(NK3SB),11.75 IN TOOL OD,8.505 IN (ID) DRILL OD,(2-STAGE) MECHANICAL

PACKOFF. CASING GRADE: API GRADE T-95. ELEMENT MATERIAL: HNBR. OD

(MAX): 11.75 IN. PACKER ELEMENT OD: 11.25 IN. DRILLOUT ID: 8.505 IN. DRIFT:

8.500 IN. OVERALL LENGTH: 10.5 FT. PACKER ELEMENT LENGTH: 0.3 FT. OPENING

SEAT ID: 7.250 IN. CLOSING SEAT ID: 7.750 IN. OPENING PRESSURE: 400-600 PSI

(INNER SLEEVE MOVESTO BEGIN PACKER SET). PACKER SETTING PRESSURE

(SHIFTS CONE AND SETS SLIPS): 2140 PSI (12 SCREWS @ 178 PSI PER SCREW).

OPENING OF STAGE TOOL PORTS (EXTERNAL SLEEVE OPENING PRESSURE): 3000

PSI (MAXIMUM) 12 SCREWS @ 250 PSI PER SCREW. CLOSING PRESSURE: 1200 PSI.

STAGE TOOL SEALS: FLOUROCARBON O-RING SEALS. CEMENTING PORTS: SIX 1-

1/8 IN DIA PORTS. MAXIMUM INTERNAL PRESSURE: 7800 PSI. MAXIMUM

EXTERNAL PRESSURE: 7480 PSI. SAFE LOAD BELOW TOOL (FS = 1.5): 909,000 LBS.

MAXIMUM TEMPERATURE RATING: 350 DEG F. MAXIMUM DIFFERENTIAL

PRESSURE (ABOVE ELEMENT): 7000 PSI WITH WATER (WHEN SET INSIDE 13-3/8

IN, 86 PPF P-110 CASING). MAXIMUM DIFFERENTIAL PRESSURE (BELOW

ELEMENT): 4500 PSI WITH WATER AND 3600 PSI WITH GAS (PLUG SET REQUIRED

FOR TOOL OPERATION MUST BE ORDERED SEPARATELY).

1000882666

340

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,VTHC,32#,C95,HYD

HANGER: LINER ASSY; 7 IN 32# VAM TOP HCX 9-5/8 IN 53.5-58.4# 'TSP' HYDRO-

HANGER, 6.0" MIN. DRIFT ID, GEN-2,HANGER LINER; HYDRAULIC ACTIVATI,FOR

H2S SOUR SERVICE,GR41XX-95000 MYS (C-95),7 IN END 1,32 LB/FT END 1,9-5/8

IN. END2,53.5 - 58.4 LB/FT END 2,VAM TOP HC END CONN,NACE MR-01-

75,TIWTYPE TSP-RRP FOR 7 IN GENERATION-2 KHUFF LINER HANGER

SYSTEMS.COMPLETE ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL UNIT WITH

ITSCOMPONENTS AS LISTED BELOWKITS COMPONENTS

1000023992

341

Drilling Equipment


Cementing

Equipment)

DV TOOL,9-5/8",NK3SB,43.5-

53.5#,MEC,3FT

COLLAR: PACKER; INFLATABLE ASSY; ESIPC;F/9-5/8 IN NK3-SB 43.5-53.5

LBS/FTCASING; W/RUPTURE DISK; W/3 FT ELEMENT;COLLAR PACKER; INFLATABLE

TYPE,FOR CEMENTING,MULTI STAGE,C-95 OREQUIVALENT CASING,9-5/8 IN.

INSIDE O,43.5-53.5 LBS/FT,13-3/8 IN.OUTSIDE,61-72 LBS/FT OUTSIDE,NK3-SB

TERMINAL,11.38 IN. TOOLOD,8.619 IN. DRILL OU,13.5 IN. EXPANSIO,API 5B,EACH

PACKERCOLLAR MUST BE BOXED AS AN INDIVIDUL UNIT FOR SHIPMENT

ANDSTORAGE, THIS DV PACKER DOES NOT HAVE PLUG SET INCLUDED WITH

IT.AND DOES NOT INCLUDE HANDLING SUB WITH IT. COMPLETE ASSEMBLYMUST

BE BOXED AS AN INDIVIDUL UNIT WITH ITS COMPONENTSKITS COMPONENTS

1000024893





9COM/9CAT

342

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,4-

1/2X6.125"OH,SLIPON

PACKER PRODUCTION; RESPACK TYPE,SWELLABLE ACTIVATI,5.790 INOD,4.607 IN

ID,4.5 IN OD,OPEN,OPEN CONNECTN,OPEN,OPENCOONECTN,OPEN HOLE SIZE:

6.125 IN. PACKER LENGTH: 18 IN.EXTERNAL ELEMENT THICKNESS (SWELLING

RUBBER): 0.913 IN. SUPPORTTUBE THICKNESS (CARBON STEEL): 0.100 IN. INNER

ELEMENT THICKNESS(SWELLING RUBBER): 0.180 IN. END RING LENGTH: 1.750 IN.

END RINGOD: 5.790 IN. END RING ID: 4.560 IN.

1000875948

343

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,NVAM,12.6#,L80,RET

PACKER PRODUCTION; QHSB HYDRAULIC SET RETRIEVABLE TYPE,FOR

H2S,CO2,HYDRAULIC SET ACTIVATI,6.000 IN OD,3.875 IN ID,7 IN OD,26-

29LB/FT,5.250-4TPI LEFT HAND SQUARE THREAD (TOP) X 4-1/2 IN, 12.6LB, L-80

NEW VAM PIN DOWN CONNECTN,12.6 LB/FT (BOTTOM),LEFT-HANDSQUARE

THREAD (TOP) NEW VAM PIN (DOWN) COONECTN,6,000 PSISUPPLY,NACE

MR0175,CARBON STEEL 4140 FLOW WETTED NITRILEELASTOMERKIT

COMPONENTS

1000742277

344

Drilling Equipment

(Advanced Well

Completion

Equipment)

PDHMS,3-1/2,EUE,DUAL

GAUGE,P+T

ASSEMBLY; MONITORING, DOWN HOLE TYPE,3-1/2 IN, DUAL, PERMANENTKIT


345

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,7",BLADERUNNER,

8.250"OD

CENTRALIZER CASING; SLIP-ON, SOLID BODY, SPIR-O-LIZERBLADERUNNER TYPE,7

IN X 8-1/2 IN CASING,8-1/4 IN BOW OD,STYLE5-BLADE, SPIRAL,INTERNAL DIA.: 7-

1/8 INCH, WALL THICKNESS: 3/16INCH, LENGTH: 10 INCH, WEIGHT: 6.10 KG,

BLADES: 5 X SPIRAL,BLADE ANGLE: 25O, BLADE LEAD IN: 2-1/2 INCH, BLADE LEAD

OUT:1-1/2 INCH, MATERIAL: ZINC ALLOY & TEFLON, USE WITH 2 EACHDUCTILE

IRON SPIR-O-LOK STOP COLLARS, WITH MATERIAL NUMBER1000XXXXX, ITEMS

MUST BE BOXED AS AN INDIVIDUAL UNIT FORSHIPMENT AND STORAGE PER

SAUDI ARAMCO PACKAGING SPEC 844418.MANUFACTURER MUST BAR CODE

IDENTIFY EACH ISSUE UNIT ON BOTH THEMATERIAL AND OUTSIDE THE

CONTAINER IN WHICH THE ISSUE UNIT ISCONTAINED. CODE TO BE IN THE

INTERNATIONAL CODE 39 BAR CODINGSYSTEM FORMAT AND ADHERE TO ANSI

MH10.8 ( LATEST EDITION)SPECIFICATION (LESS SECTIONS 12 & 13). BAR CODE

TAG MUST INCLUDETHE SAUDI ARAMCO STOCK NUMBER ANDBE PURCHASE

ORDER NUMBER.BF

1000803581





9COM/9CAT

346

Drilling Equipment

(Downhole

Equipment)

WHIPSTOCK,9-5/8,8,36-

58.4,HYD,PKR,1.98DG

WHIPSTOCK; HYDRAULIC SET TYPE,8 IN OD BODY STD,ONE TRIP

WITHRETREIVABLE PACKER, 14 FT SLIDE WITH 1.98-DEGREE WHIP FACETRIP,9-5/8

IN OD CSNG DRE,36-58.4 LB/FT CSNG DRE,CONNECTION:TOP: SHEAR BOLT,

BOTTOM: BULL NOSE, PRESSURE RATING: 5,000 PSI,MATERIAL GRADE: MODIFIED

4145 WITH 40 RC, PACKER MATERIAL: 80DURO NITRILE, RETREIVING METHOD:

HOOK OR DIE COLLAR

1000762313

347

Drilling Equipment


Cementing

Equipment)

DV TOOL,13-3/8",VAM TOP,61-

72#,C95,3FT

COLLAR, PACKER: INFLATIBLE, CEMENTING, MULTI STAGE, C-95 OR EQUIVALENT

CASING, 13-3/8 IN INSIDE OD, W/ 3 FT ELEMENT. COLLAR PACKER; INFLATIBLE

TYPE,FOR CEMENTING,MULTI STAGE,C-95 OR EQUIVALENT CASING,13-3/8 IN

INSIDE O,61-72 LBS/FT,18-5/8 IN. OUTSIDE,115 LBS/FT OUTSIDE,VAM TOP

TERMINAL,15.25 IN. TOOL OD,12.359 IN. DRILL OU,18.5 IN. EXPANSIO,API

5B,EACH PACKER COLLAR MUST BE BOXED AS AN INDIVIDUL UNIT FOR SHIPMENT

AND STORAGE, THIS DV PACKER DOES NOT HAVE PLUG SET INCLUDED WITH IT.

ALSO, NO HANDLING SUB IS REQUIRED. COMPLETE ASSEMBLY MUST BE ##BOXED

AS AN INDIVIDUL UNIT WITH ITS COMPONENTS. KITS COMPONENTS............ ITM

01, QTY 01, DESCRIPTION COLLAR: PACKER, INFLATABLE, CASING SIZE: 13-3/8" 61-

72 THREADS : VAM TOP TOOL LENGTH : 56.8 IN TOOL OD : 15.25 IN DRILL OUT ID

: 12.359 IN MAX HOLE SIZE: 18.50 IN MATERIAL : C-95 OR EQUIVALENT. P/N

101321539

1000648892

348

Drilling Equipment


Cementing

Equipment)

DV TOOL,18-

5/8",BTC,115#,L80,MEC,4FT

COLLAR: PACKER; INFLATABLE; MODEL (781 POST), F/18-5/8" 115 LBS/FT CSG,

W/BTC THD, BOX X PIN, W/4 FT ELEMENT COLLAR PACKER; INFLATABLE TYPE,FOR

CEMENTING,MULTI STAGE,L-80 CASING,18-5/8 IN INSIDE O,115 LBS/FT,24 IN

OUTSIDE,176 LBS/FT OUTSIDE,BTC BOX & BTC PIN THD TERMINAL,21.625 IN TOOL

OD,17.251 IN DRILL OU,22.25 IN EXPANSIO,FREE FALL PLUG SET PLUG 2ND,API

5B,EACH TOOL MUST BE BOXED AS INDIVIDUAL UNITS FOR SHIPMENT AND

STORAGE. PACKED TO ARAMCO SPECS. PACKING SPEC 844418 APPLIES KITS

COMPONENTS

1000609477

349

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,7",BLADERUNNER,

8.125"OD

CENTRALIZER CASING; BLADE RUNNER TYPE,7 IN X 8-3/8 IN (OD 8-1/8 IN)

CASING,TYPE: SOLID BODY, SLIP ON. BLADES: 5 X SPIRAL RIGHT HAND. MATERIAL:

ZINC-ALLOY/TEFLON. WEIGHT (KG): 5.80. FLOW-BY (SQ INS): 10.72.


1000886162





9COM/9CAT

350

Drilling Equipment

(Downhole

Equipment)

VALVE,ICV,3-

1/2",NVAM,9.2#,718,7.5K,HVC

VALVE; INTEGRATED HVC CHOKE AND ACCUPULSE TYPE,SIZE 3-1/2 IN,7,500 PSI

SUPPLY,3-1/2 9.2# NEW VAM BOX X PIN END CONN,CASING SIZE: 7 IN. 20-32#,

MAXIMUM OD: 5.865 IN, MINIMUM ID: 2.750 IN, LENGTH: 130.25 IN, 3-1/2 9.2#

NEW VAM CONNECTION TORQUE (FT-LBS):4,300 MIN, 4,770 OPT., 5,240 MAX,

HVC CONNECTION: 3-1/2 10.2# NS-CT B X P THD, 3-1/2 10.2# NS-CT CONNECTION

TORQUE(FT-LBS): 3,070 MIN, 3,430 OPT., 3,790 MAX, SERVICE: STD/H²S/CO², MAX

WORKING TEMP :275°F, WORKING PRESSURE INTERNAL: 7,500 PSI, WORKING

PRESSURE EXTERNAL: 7,500 PSI, TEST PRESSURE INTERNAL: 8,000 PSI, TEST

PRESSURE EXTERNAL: 8,000 PSI, MAX. HYDRAULIC PRESSURE: 10,000 PSI,

WORKING HYDRAULIC PRESSURE: 7,500 PSI, MAX. DIFF UNLOADING PRESSURE:

5,000 PSI, MAX. DIFF BETWEEN ACCUPULSE CHAMBER AND ANNULUS: 5,000 PSI,

HVC CHOKE: 214HVC350034, ACCUPULSE: 213AP1350003, HVC METALLURGY: INC

718, FITTING KIT METALLURGY: INC 718 / 4140, ACCUPULSE METALLURGY: INC

718, FASTENER METALLURGY: 300 SS / INC 718, CLAMP BOLT SIZE (ON ANCHOR

PROTECTOR) (ON ACCUPULSE): 3/8 - 16, ½ - 13, CLAMP BOLT TORQUE (ON

ANCHOR PROTECTOR) (ON ACCUPULSE): 50 FT-LBS, 20 FT-LBS, ELASTOMERS

F/HYD. CHAMBER: V-RINGS E081 (PTFE), O-RINGS (CHEMRAZ), BACK UP RINGS

E080 (PEEK), ELASTOMERS F/ WELLBORE FLUID: BACK UP RINGS E080 (PEEK), O-

RINGS (CHEMRAZ), PISTON AREA: 2.075 SQ. IN, TOTAL STROKE: 6.00 IN, HYD

CHAMBER DISPLACEMENT: 12.45 CU. IN, TENSILE RATING: 310,000 LBF,

COMPRESSIVE RATING: 200,000 LBF, MIN. INTERNAL FLOW AREA: 5.94 SQ.IN,

FLOW AREA BETWEEN OD OF HVC AND ID OF 7 IN. 32# CASING (6.094 ID): 4.83

SQ IN, TOTAL(2.68 SQ. IN. DUE SLOTS), FLOW TRIM CHOKE SETTINGS BASED ON

TOOL ID OF 2.75: 11 POSITIONS (1 X FULLY OPEN, 1 X FULLY CLOSED, 9 X FIXED)

0%, 3%, 4%,6%, 10%, 14% 19%,24%, 43%, 83%, 116%, COIL TUBING SHIFTING

TOOL: 290HM0275000, SPAECIAL NOTES: 2 BYPASS SLOTS, ASSY PICTORAL/ BOM

DRAWING: 312557-10-01, TECH DOC: 312025-00-01

1000780057





9COM/9CAT

351

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X3-

1/2,NVAM,9.2#,41XX,FTHRU

PACKER PRODUCTION; MULTI-PORT, HYDRAULIC SET, RETRIEVABLEMILLABLE

TYPE,HYDRAULIC SET ACTIVATI,5.992 IN OD MAX. OD,2.940IN ID MIN. WITH 0.350

IN. OFFSET ID,7.000 IN OD,26-29LB/FT,3-1/2 IN. 2.9 PPF NEW VAM BOX X PIN

CONNECTN,2.9 PPF (TOP)X 2.9 PPF(BOTTOM),NEW VAM BOX X PIN

COONECTN,5,000 PSI IWPSUPPLY,EXTERNAL WP: 5000 PSI @ 250OF, DRIFT ID:

2.920 IN,MATERIALS: ELASTOMERS: NITRILE, ELEMENTS: CENTER: HNBR

(80DURO), END: HNBR (90 DURO)/316SS WIRE MESH FLOW WETTED:4130/4140

O-RINGS: HNBR (90 DURO) TEMP. RATING: 250OF THISMULTI-PORT PACKER

NEEDS 3,000 TO 3,500 PSI PRESSURE DIFFERENTIALAT THE PACKER AGAINST A

PLUG LOCATED BELOW THE SETTING PORTS OFTHE PACKER. THE HYDRAULIC

PRESSURE ENTERS A PORT IN THE MANDRELRELEASING THE TRIPPING PISTON

AND UNLOCKING THE ANTI-PRESETMECHANISM. A FURTHER INCREASE IN

TUBING PRESSURE SHEARS THESHEAR PINS IN THE LOWER CONE, ALLOWING

PISTON TO STROKE THESEALING ELEMENT WHILE WHILE THE SLIPS REMAIN

RETRACTED. SETTINGIS COMPLETED WHEN SUFFICIENT FORCE IS APPLIED TO

ANCHOR THEUPPER TEETH, THEN THE LOWER TEETH OF THE SLIPS. THE

RACHETRINGRETAINS THE SETTING FORCE. ALL SETTING CHAMBERS ARE

ISOLATEDBELOW THE PACKING ELEMENT SYSTEM- THIS ELIMINATES THE

POTENTIALFOR A LEAK PATH THROUGH THE SETTING MECHANISM. APPLYING

STRAIGHTPULL RETRIEVES THE PACKER. WHEN THE TENSION REACHES THE

PRESETVALUE AT THE PACKER, THE SHEAR RING IS SHEARED ALLOWING

THEMANDREL TO MOVE UPWARD AND THE OUTER PARTS OF THE PACKER

TORELAX FROM THE CASING WALL. SUBSEQUENT PULL WILL STROKE THEOUTER

PARTS, PERMITTING THE RETRIEVAL OF THE PACKER.

1000782736





9COM/9CAT

352

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,NVAM,12.6#,S13CR,RET

PACKER, PRODUCTION: "PREMIER",RETRIEVABLE, H2S, HYDRAULIC SET, 5.875IN

OD, 3.875 IN ID, 7 IN CASING OD,PACKER PRODUCTION; "PREMIER", RETRIEVABLE

TYPE,FOR H2S,HYDRAULICSET ACTIVATI,5.875 IN OD,3.875 IN ID,7 IN OD,23-26

LB/FT,4-1/2IN (TOP) X 4-1/2 IN (BOTTOM) CONNECTN,12.6 LB/FT,NEW VAM

BOX(TOP) X PIN (BOTTOM) COONECTN,7,500 PSI SUPPLY,NACE-01-75,L-80PACKER

AND PBR MATERIAL, 9CHROME-1MOLY SEAL ASSEMBLY MATERIAL ASPER NACE-

01-75, 18-22 RC, PACKER NITRILE ELASTOMER.PACKER, PRODUCTION:

"PREMIER",RETRIEVABLE, H2S, HYDRAULIC SET, 5.875IN OD, 3.875 IN ID, 7 IN

CASING OD,PACKER PRODUCTION;"PREMIER", RETRIEVABLE TYPE,FOR

H2S,HYDRAULICSET ACTIVATI,5.875 IN OD,3.875 IN ID,7 IN OD,23-26 LB/FT,4-

1/2IN (TOP) X 4-1/2 IN (BOTTOM) CONNECTN,12.6 LB/FT,NEW VAM BOX(TOP) X

PIN (BOTTOM) COONECTN,7,500 PSI SUPPLY,NACE-01-75,L-80PACKER AND PBR

MATERIAL, 9CHROME-1MOLY SEAL ASSEMBLY MATERIAL ASPER NACE-01-75, 18-

22 RC, PACKER NITRILE ELASTOMER.

1000669724

353

Drilling Equipment

(Downhole

Equipment)

CONNECTOR,HYD,4-1/2,WET

MATE,2PORT,AFLAS

LINE; HYDRAULIC LINE TYPE,SIZE 4-1/2 INCH,AFLAS,4 1/2 INCHHYDRAULIC LINE

WET MATE CONNECT SYSTEMKIT COMPONENTS 1000888235

354

Drilling Equipment

(Advanced Well

Completion

Equipment)


GAUGE

ASSEMBLY; MONITORING TYPE,PERMANENT DOWNHOLE, DUAL, 4-1/2 IN KIT


355

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,VTHC,15.1#,S13CR

PACKER PRODUCTION; ONE TRIP COMPLETION TYPE,FOR

CO2,HYDRAULICACTIVATI,5.750 IN OD,3.743 IN ID,7 IN OD,32 - 35 PPF,4-1/2

INCONNECTN,15.10 PPF,VAM TOP HC BOX-PIN COONECTN,100 - 300 DEG F,9020

PSI SUPPLYKITS COMPONENTS

1000840278

356

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,NVAM,12.6,#,4140,HYD

PACKER PRODUCTION; 'QHSB' TYPE,FOR H2S, CO2,HYDRAULIC SET ACTIVATI,5.875

IN OD,3.875 IN ID,7 IN OD,26-29 LB/FT,5.250-4TPI LEFT HAND SQUARE THREAD

(TOP) X 4-1/2 IN 12.6# L-80 NEW VAM PIN DOWN CONNECTN,12.6 LB/FT

(BOTTOM),LEFT-HAND SQUARE THREAD (TOP) COONECTN,6,000 PSI

SUPPLY,NACE MR 01-75,CARBON STEEL 4140 FLOW WETTED AFLAS ELASTOMER

KIT COMPONENTS

1000731568





9COM/9CAT

357

Drilling Equipment


Cementing

Equipment)

DV TOOL,9-5/8",LTC,36-

40#,L80,MEC

COLLAR: PACKER; INFLATABLE; MODEL (781 POST) F/9-5/8 IN. OD 36 TO 40 LB/FT

CASING; W/API 5B LTC THREAD COLLAR PACKER; INFLATABLE TYPE,FOR

CEMENTING,MULTI STAGE,L-80 CASING,9-5/8 IN INSIDE O,36-40 LB/FT,13-3/8 IN

OUTSIDE,61.0-72.0 LB/FT OUTSIDE,8RD LTC BOX & LTC PIN THD TERMINAL,11-3/4

IN TOOL OD,8.75 IN ID DRILL OU,16 IN EXPANSIO,BOTTOM PLUG 1ST,FREE FALL

PLUG 2ND,API 5B,FREE FALL PLUG SET CONSISTS OF SHUT-OFF BAFFLE & PLUG

AND FREE FALL OPENING CONE & CLOSING PLUG, PACKED TO CUSTOMER SPECS

PACKING SPEC 844418 APPLIES KITS COMPONENTS

1000022888

358

Drilling Equipment

(Downhole

Equipment)

KIT,TIEBACK,9-

5/8",VTOP,53.5#,TBR,MDISK

PACKER PRODUCTION; 9-5/8 IN, 53.5 PPF X 14 IN, 114 PPF, 10K PSI BAKER LINER

TOP PACKER ASSEMBLY. KIT COMPONENTS 1000830500

359

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,9-5/8X3-

1/2,NVAM,9.2#,FTHRU

PACKER PRODUCTION; MULTI-PORT, HYDRAULIC SET, RETRIEVABLE MILLABLE

TYPE,HYDRAULIC SET ACTIVATI,8.445 IN OD MAX. OD,2.940 IN ID ID,9-5/8 IN

OD,43.5-47 LB/FT,3-1/2 IN. 9.2 PPF NEW VAM BOX (TOP) X 3-1/2 IN. 9.2 PPF NEW

VAM PIN (BOTTOM), CONNECTN,9.2 PPF X 9.2 PPF(TOP X BOTTOM),NEW VAM

BOX X PIN COONECTN,5,000 PSI IWP SUPPLY,EXTERNAL WP: 5000 PSI @ 250OF,

DRIFT ID: 2.925 IN, MIN. ID: 2.935 IN, MATERIALS: ELASTOMERS: NITRILE,

ELEMENTS: NITRILE FLOW WETTED: 4130/4140, O-RINGS: NITRILE, TEMP.

RATING: 250OF MAX. HYDROSTATIC PRESS.: 4200 PSI MAX. @ 250OF OA LENGTH:

98 IN. SETTING DIFF. PRESS.: 3800 PSI MIN. THIS MULTI-PORT PACKER NEEDS

3,000 TO 3,500 PSI PRESSURE DIFFERENTIAL AT THE PACKER AGAINST A PLUG

LOCATED BELOW THE SETTING PORTS OF THE PACKER. APPLYING STRAIGHT PULL

RETRIEVES THE PACKER. WHEN THE TENSION REACHES THE PRESET VALUE AT

THE PACKER, THE SHEAR RING IS SHEARED ALLOWING THE MANDREL TO MOVE

UPWARD AND THE OUTER PARTS OF THE PACKER TO RELAX FROM THE CASING

WALL. SUBSEQUENT PULL WILL STROKE THE OUTER PARTS, PERMITTING THE

RETRIEVAL OF THE PACKER.

1000782735

360

Drilling Equipment


Cementing

Equipment)

DV TOOL,9-

5/8",NK3SB,53.5#,110,HYD

CEMENTER; HYDRAULIC TYPE,9-5/8 IN OD,53.5 PPF WT,TENARIS HYDRIL

3SB,11.700 IN TOOL OD,8.500 IN DRILL OD,9-5/8 IN X 13-3/8 IN, 86 PPF

HYDRAULIC MID STRING ZX PACKER TWO STAGE CEMENTING SYSTEM WITH PAC

VALVE SYSTEM KIT COMPONENTS

1000885435





9COM/9CAT

361

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,16X18-

5/8,ABF,84#,L80,HYD

HANGER LINER; HYDRAULIC ACTIVATI,GR L-80,16 IN END 1,84 PPF END 1,18-5/8

IN END 2,87.5 PPF END 2,ANTARES BIG FLUSH,TIW IB-TC R HYDRO-HANGER

ASSEMBLY WITH LX LINER PACKER WITH RPOB AND HD CEMENT MANIFOLD FOR

16 IN 84 PPF BY 18-5/8 IN 87.5 PPF LINER. KIT COMPONENTS

1000882677

362

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,VTHC,32#,625,HYD

HANGER LINER; HYDRAULIC ACTIVATI,7 IN END 1,32 PPF END 1,9-5/8 IN END

2,58.4 PPF END 2,7 IN, 32 PPF VAM TOP HC BOX DOWN END CONN,7 IN X 9-5/8

IN 58.4 PPF LOWER COMPLETION FOR HASBAH. MATERIAL: NICKLE ALLOY 625

PLUS. KIT COMPONENTS

1000891392

363

Drilling Equipment

(Downhole

Equipment)

NIPPLE,LANDING,4-

1/2",VTHC,R,3.688"ID

NIPPLE, LANDING: TYPE R, 9% CHROMIUM - 1% MOLYBDENUM, 80K, H2S AND

CO2, API 14L/ISO 16070, API Q1/ISO 9001. NIPPLE LANDING; R TYPE,9%

CHROMIUM - 1% MOLYBDENUM,80K,FOR H2S & CO2,API 14L/ISO 16070, API

Q1/ISO 9001 COONECTN,POLISHED BORE,3.688 IN ID,5.041 OD,18.37 IN LG,4-1/2

IN TUBING OD,15.10 LB/FT,VAM TOP HC BOX X PIN,API 14L/ISO 16070, API

Q1/ISO 9001,MADE TO NACE MR-01-75 (LATEST EDITION), BURST PRESSURE:

10,480 PSI (CALCULATED) COLLAPSE PRESSURE: 11,080 PSI (CALCULATED)

PRESSURE RATING: 9,600 PSI

1000648889

364

Drilling Equipment


Cementing

Equipment)

DV TOOL,9-

5/8",NK3SB,53.5#,T95HCHS,MEC,

4

COLLAR: PACKER; INFLATABLE; MODEL (781 POST) F/9-5/8 IN OD 53.5 LB/FT

CASING, W/4 FT ELEMENT, NK-3SB THD, BOX X PIN COLLAR PACKER; INFLATABLE

TYPE,FOR CEMENTING,MULTI STAGE,T-95HCHS CASING,9-5/8 IN INSIDE O,53.5

LB/FT,13-3/8 IN OUTSIDE,86 LB/FT OUTSIDE,NK-3SB BOX & NK-3SB HC PIN THD

TERMINAL,11.75 IN TOOL OD,8.50 IN ID DRILL OU,15.50 IN EXPANSIO,API

5B,EACH POST TOOL MUST BE BOXED AS INDIVIDUAL UNTS FOR SHIPMENT AND

STORAGE THIS TOOL DOES NOT HAVE A PLUG SET WITH IT. PACKED TO SAUDI

ARAMCO SPECS. PACKING SPEC 844418 APPLIES KITS COMPONENTS

1000609476





9COM/9CAT

365

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,4-

1/2X7,VTHC,13.5,41XX,32#

HANGER LINER; 4-1/2 IN END 1,13.5 LBS END 1,7 IN END 2,29-32 LBS END 2,VAM

TOP HC END CONN,VLH BDY ASSY ,5,7,29-32,87 OD,VTN LINER HANGER TYPE :

STANDARD CASING SIZE : 7 CASING WEIGHT : 29.0:32.0 MATERIAL : 41XX LOW

ALLOY STEEL ELEMENT MATERIAL : RUBBER TEMPERATURE RATING SERVICE : 40

TO 275 SERVICE : STD BOTTOM THREAD : 5- 18.00 VAM TOP-HT CONNECTION

TYPE : PIN BOTTOM THREAD MAKE-UP TORQUE : 10500( OPTIMUM) (FT-LBS):

9500( MINIMUM), : 11500(MAXIMUM) FOR 5-18.00 VAMTOP-HC MAKE-UP

TORQUE ,LINER HANGER : 1700 (MINIMUM) 1865(OPTIMUM) BODY #UPPER (FT-

LBS) 2035 (MAXIMUM) FOR 5.607 HST-DS MAKE #UP TORQUE,LINER : 4850 (

MINIMUM) HANGER : 5340 ( OPTIMUM) BODY-LOWER (FT- LBS) : 5820

(MAXIMUM) FOR 5.366 HST-DS MAKE-UP TORQUE, SETTING : 4850 ( MINIMUM)

SLEEVE- UPPER ( FT-LBS) : 5340 (OPTIMUM) FOR 5.366 HST-DS MAKE #UP

TORQUE,SEETING : 5300( MINIMUM) SLEEVE-LOWER (FT- LBS : 5840(OPTIMUM ) :

6360(MAXIMUM) : FOR 5.366 HST-DS MAXIMUM OD : 5.885 INCH 149.479MM

MAXIMUM OD REMARKS : UPPER SETTING SLEEVE MAXIMUM OD (TIE-BACK

RECEPTACLE : 5.880 IN 149.352 MM NOMINAL OD ( ELASTOMERS) : 5.870 INCH

149.098MM ID-MIN (TIE-BACK RECEPTACLE) : 5.246 IN 133.248 MM SEAL BORE

LENGTH-MAX(TIEBACK RECEPTACLE : 94.996 IN 241.29 CM MAXIMUM OD (

SETTING SLEEVE ) : 5.885 INCH 149.479 MM NOMINAL ANNULAR BYPASS :

2.973(7, 29), AROUND : 2.105(7,32) LINER HANGER (SQ.INCHES) : MINIMUM ID :

4.213 INCH 107.01 MM MINIMUM ID REMARKS : LOWER SETTING SLEEVE

NOMINAL LENGTH : 255.31 INCH SETTING PRESSURE : 6829 PSI (7,29), : 5752 PSI

(7,32) BURST PRESSURE ABOVE : 8191 PSI 56475 KPA ELASTOMERS (CALC) BURST

PRESSURE ABOVE ELASTOMERS REMARKS: PBR WALL OF BODY COLLAPSE

PRESSURE ABOVE ELASTOMERS (CALC) : 7821 PSI 53924 KPA COLLAPSE PRESSURE

ABOVE ELASTOMERS REMARKS : PBR WALL OF BODY TENSILE RATING ABOVE

ELASTOMERS (CALC) : 178054 POUND 80764 KPA TENSILE RATING ABOVE

ELASTOMERS REMARKS: BODY UPPER THREADS BURST PRESSURE BELOW

ELASTOMERS CALC : 9377 PSI 64652 KPA BURST PRESSURE BELOW ELASTOMERS

REMARKS : BODY LOWER THREADS COLLAPSE PRESSURE BELOW ELASTOMERS

(CALC) : 10263 PSI 70761 KPA COLLAPSE PRESSURE BELOW ELASTOMERS REMARK

1000828970

366

Drilling Equipment


Cementing

Equipment)

COLLAR,STOP,7",SLIPON,2.000",

DHP

COLLAR CASING STOP; SLIP-ON, SPIR-O-LOK, 7 IN TYPE,FOR POSITIONING

CENTRALIZERS,INTERNAL DIA.: 7.125 INCH, OUTSIDE DIA.: 8.00 INCH, LENGTH: 2

INCH, NO. OF SCREWS: 8 EACH, SIZE OF SCREW: 1/2 INCH DIA., MATERIAL: CAST

DUCTILE IRON, FOR 7" X 8-1/2" SPIR-O-LIZER CENTRALIZER,

1000803586





9COM/9CAT

367

Drilling Equipment

(Downhole

Equipment)

PBR/SEAL,4-

1/2",VTOP,15K,41XX,30 FT

SEAL; LOWER PBR TYPE,SIZE 4-1/2 IN,41XX LOW ALLOY STEELKIT COMPONENTS1000898876

368

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,NVAM,26#,47-53.5#

HANGER LINER; MECHANICAL ACTIVATI,FOR STD,7 IN 26# NEW VAM END

CONN,MAXIMUM OD (ELASTOMERS) 8.325 IN ID-MIN (TIE-BACK

RECEPTACLE)116.50 IN MAXIMUM OD (SETTING SLEEVE)8.325 IN MAXIMUM ID

6.745 IN MINIMUM ID REMARKS,SETTING SLEEVE NOMINAL LENGTH 346.6 IN

SETTING PRESSURE 3902(47 LBS),2792(53.5 LBS) BURST PRESSURE ABOVE

ELASTOMERS(CLAC)6483 BURST PRESSURE ABOVE ELASTOMERS REMARKS PBR

WALL OF BODY COLLAPSE PRESSURE ABOVE ELASTOMERS (CALC)4530 PSI

COLLAPSE PRESSURE ABOVE ELASTOMERS (CALC) PBR TENSILE RATING ABOVE

ELASTOMERS (CALC)30865 LNR HGR BDY ASSY, VLH, POUND 7-5/8,9-5/8,53.5-47.

LINER TENSILE RATING ABOVE ELASTOMERS (CALC) HANGER TYPE,STANDARD

CASING BODY UPPER THREAD SIZE 9-5/8,9-7/8. BURST MATERIAL,41 XX LOW

ALLOY PRESSURE BELOW ELASTOMERS STEEL. ELEMENT (CALC) 8761 PSI

MATERIAL,FLUOROCARBON BURST RUBBER. PRESSURE BELOW ELASTOMERS

TEMPERATURE RATING 40:275. REMARK 7.583 HST-DS BOX SERVICE THRAD

COLLAPSE PRESSURE STD BELOW ELASTOMERS(CALC)8340 BOTTOM THREAD

7.5/8-33.70 NEW VAM. PSI . COLLAPSE PRESSURE CONNECTION TYPE PIN BELOW

ELASTOMERS REMARKS BOTTOM THREAD MARK-UP (CALC). TORQUE (FT-LBS)

12700(MINIMUM),14100. BOTTOM THREADS (OPTIMUM),15500(MAXIMUM)FOR

7"IN 26# NEW VAM PIN 7-5/8-33.7 NEW VAM . TENSILE RATING BELOW ELAS

MAXIMUM OD 8.375 IN MAXIMUM OD REMARKS GAUGE RING OD MAXIMUM

OD (TIE-BACK RECEPTACLE)8.325 IN

1000791668

369

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,4-

1/2X8.50"OH,SLIPON

PACKER PRODUCTION; RESPACK TYPE,SWELLABLE ACTIVATI,8.150 INOD,5.654 IN

ID,5.5 IN OD,OPEN,OPEN CONNECTN,OPEN,OPENCOONECTN,OPEN HOLE SIZE:

8.500 IN. PACKER LENGTH: 18 IN.EXTERNAL ELEMENT THICKNESS (SWELLING

RUBBER): 1.166 IN. SUPPORTTUBE THICKNESS (CARBON STEEL): 0.100 IN. INNER

ELEMENT THICKNESS(SWELLING RUBBER): 0.180 IN. END RING LENGTH: 1.750 IN.

END RINGOD: 8.150 IN. END RING ID: 5.579 IN.

1000875949





9COM/9CAT

370

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,NVAM,26#,L80,HYD

HANGER LINER; HYDRAULIC ACTIVATI,GR L-80 & P-110 CASING,7 IN END 1,26

LB/FT END 1,9-5/8 IN END 2,36-43.5 LB/FT END 2,NEW VAM END CONN,SMITH

SERVICE 7 IN HYDRAULIC SET LINER HANGER, SIZE 7 IN. 26# X 9-5/8 IN. 36-43.5#

MODEL "HCDC" HYDRAULIC SET LINER HANGER WITH "SATM" SETTING ADAPTER,

6 FT LONG TIE-BACK RECEPTACLE. CONSIST OF: ITEM NO. QUANTITY DESCRIPTION

01 01 MODEL #HCDC# SOLID BODY, DUAL CONE HYDRAULIC SET LINER HANGER,

7 IN. 26# NEW VAM BOX X PIN.HANGER O.D. 8.250 IN. I.D. 6.276 IN. L-80

MATERIAL. FIELD ADJUSTABLE SHEAR: 1220-3000 PSI PART NUMBER:

HCDC373601044LE 02 01 MODEL #BC# BALL SEAT LANDING COLLAR WITH 7 IN.

26# NEW VAM BOX X PIN CAST IRON BALL SEAT, L-80 MATERIAL. FIELD

ADJUSTABLE SHEAR: 1200-3000 PSI. PART NUMBER: BC44997044LE 03 01 MODEL

#FC# FLOAT COLLAR WITH 7 IN. 26# NEW VAM BOX X PIN, SINGLE FLAPPER VALVE

CAST IRON INSERT, L-80 MATERIAL. PART NUMBER: FC4498949044LE 04 01

MODEL #FS# FLOAT SHOE WITH 7 FT. 26# NEW VAM BOX, DOUBLE FLAPPER

VALVE CAST IRON INSERT, L-80 MATERIAL. PART NUMBER: FS44989590044LE 05

01 MODEL #LWPC# LINER WIPER PLUG WITH ANTI ROTATIONAL LOCK NOSE, PDC

DRILLABLE, MATERIAL NITRILE, ALUMINIUM T-6061. PART NUMBER:

LWPC49004N 06 01 MODEL #PDPC# DRILL PIPE PUMP DOWN PLUG WITH ANTI

ROTATIONAL LOCK NOSE, PDC DRILLABLE SUITABLE FOR 5 IN. 19.5# DRILL PIPE.

MATERIAL NITRILE ALUMINIUM T-6061. PART NUMBER: PDPC50004N

1000771959





9COM/9CAT

371

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,4-

1/2X7,TB,15.2#,125,HYD

HANGER LINER; HYDRAULIC ACTIVATI,4 1/2 INCH END 1,15.2 PPF END1,7 INCH

END 2,35 PPF END 2,TENARIS BLUE END CONN,4 1/2 INCH,15.2 PPF, TENARIS

BLUE PIN X PIN.,4 1/2 INCH BAKER LINER HANGEREQUIPMENT FOR DEEP GAS

EXPLORATION WELLS, CONSISTING OFFOLLOWING: 1) LINER HANGER ASSEMBLY :

4 1/2 INCH, 15.2 PPF X 7INCH, 35 PPF, MODEL FLEX-LOCK III, AS FOLLOWS: 1.01

(QTY 1)BAKER HYDRAULIC SET MODEL 'FLEX-LOCK III. SIZE : 4 1/2 INCH,15.2 PPF X

7 INCH, 35 PPF. MAX OD : 5.625 INCH. MIN ID :3.800INCH. MIN DRIFT ID : 3.750

INCH. MAX LOAD CAPACITY :600,000 LBS, INSIDE 7 INCH, 35 PPF. TENSILE LOAD :

414,625 LBS.YIELD PRESSURE : 15,380 PSI. COLLAPSE PRESSURE : 14,430

PSI.LENGHT : 10 FT LONG. THREADS : 4 1/2 INCH, 15.2 PPF, TENARISBLUE PIN X

MYS CR-MO LOW ALLOY PIN. MATERIAL : => 125 KSISTEEL,FOR SERVICE IN H2S

ENVIROMENTAT TEMP _> 225 DEG F.THISWILL BE FOR ALL THE MATERIAL L/I 3.01

TO 3.09. MATERIAL NO :H2941001XX. BRONZE SETTING BALL. MATERIAL NO :

HWX17398XX. 1.02(QTY 1) BAKER MODEL 'ZXP' LINER TOP PACKER C/W HOLD

DOWN SLIPS,HR 20 FT PBR XYLAN-1052 COATED, FOR USE WITH 41/2 INCH

HRRUNNING TOOL, HONNED ID X 15FT LONG. SIZE : 4 1/2 INCH, 15.2PPFX 7 INCH,

35 PPF. EXTENSION SIZE : 5.750 INCH OD X 5.000 INCH.MAX PACKER OD : 5.789

INCH. MIN ID : 3.800 INCH. MIN DRIFT ID :3.750 INCH. INT YIELD PRESSURE :

16,380 PSI. COLLAPSE PRESSURE :15,840 PSI. TENSILE LOAD : PACKER ELEMENT

RATING : 13,000 PSI @400 DEG F, 352,825 LBS W/110MYS. QUALIFIED TO ISO

14310 V-0,ELEMENT SHALL FURTHER EXHIBIT NO (ZERO) SEAL DAMAGE WHEN

EXPOSEDTO HIGH CIRCULATION RATES UPTO 15 BPM WITH CONDITIONS

REFERENCEDIN API RP 10F-CAT IIIC. THREAD : 4 1/2 INCH, 15.2 PPF, TENARISBLUE

BOX DOWN. MATERIAL NO : H2962803XX. 1.03 (QTY 1). BAKERDRILLABLE PACK

OFF BUSHING. SIZE : 4 1/2 INCH, 15.2 PPF, TENARISBLUE PIN UP X#BOX DOWN.

MATERIAL NO : H28205XXXX. 1.04 (QTY 1).BAKER PLUG HOLDER BUSHING. SIZE :

4 1/2 INCH, 15.2 PPF, TENARISBLUE BOX UP X PIN DOWN. 1.05 (QTY 1). BAKER

TYPE II LANDINGCOLLAR BALL SEAT. SIZE : 4 1/2 INCH, 15.2 PPF, TENARIS

W/BAFFLEPLATE AND CERAMIC BLUE BOX UP X PIN DOWN. MATERIAL NO

:H2665512XX. 1.06 (QTY 1). BAKER DOUBLE VALVE FLOATCOLLAR

W/CASTALUMINUM VALVES, MUST MEET API RP 10F. SIZE : 4 1/2 INCH, 15.2PPF,

1000844953





9COM/9CAT

372

Drilling Equipment


Cementing

Equipment)

DV TOOL,18-5/8",TN

ER,136#,L80,MEC

COLLAR; STAGE CEMENTER TYPE,SIZE 18-5/8 IN,TENARIS HYDRIL,STAGE TOOL,

COLLAR, TYPE P ES INFLATABLE PACKER, TYPE: ESIPC-P WITH METAL BLADDER

PACKER, CASING SIZE: 18-5/8 IN, CASING THREADER: TENARIS HYDRIL, CASING

THREAD: ER, CASING WEIGHT: 136 PPF, CASING GRADE: L-80, NOMINAL OD:

20.800 IN, MIN CASING ID: 17.219 IN, LENGTH: 75.76 IN, OPENING: 330 PSI, 2ND

OPENING: 1,450 PSI, CLOSING: 490 PSI, BURST: 5,435 PSI, COLLAPSE: 5,435 PSI,

TENSILE: 3,164,352 LBS.WITH COMPLETE SET OF FREE FALL PLUG SET

1000844376

373

Drilling Equipment


Cementing

Equipment)

SHOE,FLOAT,24",JVLW,176#,X52,

ISC

SHOE FLOAT; GR X-52,24 IN OD,176 LB/FT,JVLW BOX CONNECTN,API 5B,22.2450

IN DRILL ID, WITH SS3 VALVE AND ISC PROFILE AND 5.5 IN X 5 IN DRILL PIPE

DISPLACEMENT DART "PDC DRILLABLE" 1000736311

374

Drilling Equipment

(Downhole

Equipment)


29#,HYD,1.98DG

WHIPSTOCK; SHALLOW ANGLE QUICK CUT (SAQC) TYPE,5-1/2 IN OD BODY

STD,ONE TRIP, RETRIEVABLE TRIP,7 IN CSNG DRE,23-29 LB/FT CSNG

DRE,SHALLOW ANGLE QUICK CUT, HYDRAULIC SET, RETRIEVABLE TYPE, WITH

PACKER, FOR 7 IN. 23-29 LB/FT. FACE LG, OVERALL LG OF 20.4 FT.

1000787908

375

Drilling Equipment

(Downhole

Equipment)

PBR/SEAL,2-

7/8",EUE,6.4#,9CR,10FT

RECEPTACLE: POLISHED BORE; 2.330 IN MIN ID, 3.80 IN MAX OD, 10 FT STROKE,

F/2-7/8 IN 6.4 LB/FT TUBING, TO BE USED ON 4-1/2 IN AND 5 IN ‘TWR’ PACKER

WITH MATERIAL NUMBERS 10000025174 AND 1000589638. RECEPTACLE; PBR

TYPE,SIZE 2.33 IN ID X 3.80 IN OD X 17.5 FT LG,ALLOY STEEL,NACE MR-01-75-

97,AA 8 RD EUE PIN, H2S SERVICE KITS COMPONENTS

1000589639

376

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-


HANGER: LINER ASSEMBLY; HORIZONTAL; 7 IN. 26 LB/FT VAM X 9-5/8 IN. 36.0 TO

47.0 LB/FT; L-80 MATERIAL; TEXAS IRON HANGER LINER; HYDRAULIC

ACTIVATI,FOR HORIZONTAL & HIGH ANGLE COMPLETIONS,GR L-80,7 IN END

1,26.0 LB/FT END 1,9-5/8 IN END 2,36.0-47.0 LB/FT END 2,STUB ACME BOX UP X

NEW VAM PIN DOWN END CONN,TEXAS IRON WORKS TYPE "RP" & "IB-SC-R",

SINGLE CONE, COMPLETE ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL UNIT

WITH COMPONENTS AS SPECIFIED IN KITS SECTION KITS COMPONENTS

1000024133





9COM/9CAT

377

Drilling Equipment

(Advanced Well

Completion

Equipment)

PANEL,CONTROL,HYD-

ELE,1WELL,4VALVE,AUTOM

PANEL; CONTROL, HYDRAULIC TYPE,SS AISI 316,NEMA 4X, POWER

REQUIREMENT: 110 VAC, 4 KW, SCADA COMPATIBLE, REMOTELY OPERATED

ELECTRICALLY DRIVEN FOR IWC, CAPABLE OF OPERATING 4 VALVES, AND

MONITORING PDHMS IN 1 WELL, SCADA COMMUNICATION PROTOCOL: MODBUS-

485 OR ETHERNET, MAX PRESSURE: 10000 PSI, TEMPERATURE RATING: 55 DEG C

(UNDER SHELTER), HYDRAULIC TANK CAPACITY: 30 GAL., FLOW CONTROL VALVE:

SCHLUMBERGER TRFC-HN, PUMP FLOW RATE: 1 L/MIN (MAX), FULLY

COMPATIBLE WITH SAUDI ARAMCO I-FIELD REQUIREMENTS THE SURFACE UNIT

SHALL BE E WITH DRAIN VENT CONNECTIONS ARAMCO SAES-J-902. SURFACE

UNIT SHALL DISPLAY VIA ELECTRONIC VISUAL DISPL CRYSTAL DISPLAY (LDC) TO

DO LOCALLY

1000824566

378

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,4-

1/2,NVAM,11.6#,250MC

SCREEN; SIZE 4-1/2 IN,316L/304SS,MESH-SCREEN TYPE, MAX LENGTH: 41 FT, 11.6

PPF, RANGE 3, THREAD CONNECTION: NEW VAM BOX X PIN, RESTICTOR

MODULE: ADJUSTABLE, TOOL MAX OD: 5.625 IN, TOOL MIN ID: 3.939 IN, BASE

PIPE MATERIAL: L-80, SCREEN LENGTH: 20 FT, SCREEN: 250 MICRON NOMINAL,

ICD AND SCREEN MATERIAL: 316L/304SS.

1000818229

379

Drilling Equipment


Cementing

Equipment)

DV TOOL,18-5/8",BIG

OMEGAIS,136#,L80,MEC

CEMENTER; SET, ESIPC TYPE,18-5/8 IN OD,136 LB/FT WT,BIG OMEGA IS,GRADE: L-

80, TYPE P ES INFLATABLE PACKER COLLAR WITH METAL BLADDER PACKER AND

TWO-STAGE FREE-FALL PLUG SET, WITH 9.81 ID INSERT BAFFLE ADAPTER, WITH

COMPOSITE FREE-FALL OPENING PLUG.THIS DV SHOULD BE WITH 3,000 PSI

(MINIMUM) DIFFERENTIAL PRESSURE & WILL BE DEPLOYED @+/- 5,000-FT.

1000830134

380

Drilling Equipment

(Advanced Well

Completion

Equipment)

SCREEN,4-

1/2,NK3SB,13.5#,250MIC,S13CR

SCREEN; SIZE 4-1/2 IN,S13CR STAND ALONE, SAND CONTROL SCREENS FOR GAS

WELLS SHOULD MEET OR EXCEED FOLLOWING SPECIFICATION, BASE PIPE, SIZE

AND WEIGHT: 4 1/2 IN, 13.5 PPF, RANGE 3, MIN YIELD STRENGTH: 95,000 PSI,

MIN TENSILE STRENGTH: 105,000 PSI, SUPER 13 CHROME, NK3SB CASING

THREADS (BOX AND PIN CONNECTION), SCREEN /FILTER MEDIA/ WEAVE,

NOMINAL 250 MICRON WEAVE, ALLOY 20 OR INCONEL 825, TWO SCREEN

SUPPORTING LAYERS (INNER JACKET/ DARINAGE LAYER), ALLOY 20 OR INCONNEL

825, SHROUD: 304 STAINLESS STEEL. LENGTH: 38-40 FT

1000840500





9COM/9CAT

381

Drilling Equipment

(Advanced Well

Completion

Equipment)

ICD-SCREEN,4-


SCREEN; FLOREG ICD WITH 350 MICRON DIRECT WRAP SCREEN TYPE,SIZE 4-1/2

IN,SS316L,GRADE: L-80 BASE PIPE, BASE PIPE SIZE: 4-1/2 IN, BASE PIPE MATERIAL:

SS316L, WITH SLOT AT 0.014" GAUGE OPENING, (SLOT TOLERANCE +0.002 IN, -

0.003 IN). BASE PIPE WEIGHT: 12.6 PPF, BASE PIPE GRADE: L-80, CONNECTION:

NEW VAM PIN X BOX AT 38 FT (+0, -1 FT), SCREEN LENGTH AT 16 FT WITH IN

–FLOW CONTROL DEVICE, HOUSING RETAINING RING: 316L, HOUSING: 13CR-

80KSI, FLOW RING: 316L, THREADED RING: 316L, FLOW PORT MATERIAL:

TUNGSTEN CARBIDE, SET SCREW (5/16 UNF): 316L, O-RING: VITON, DIRECT WRAP

TENSILE: 227,000 LBS, DIRECT WRAP TORQUE: 18,000 FT-LBS, DIRECT WRAP

BURST: 4175 PSI, DIRECT WRAP COLLAPSE: 5,080 PSI.

1000840969

382

Drilling Equipment

(Advanced Well

Completion

Equipment)

CABLE,DOWNHOLE,16AWG,1/4",

INC825,1FT

CABLE; PERMANENT DOWNHOLE TYPE,16 AWG DIA,NICKEL PLATED

COPPER,DOWNHOLE CABLE COMES IN, MINIMUM BEND RADIUS: 1 IN, 1/4 IN, OD

SIZE FOR PDHMS HARDNESS: 250-345 MICRO (HV 500), WEIGHT: 160, SYSTEM

APPLICATION, PHYSICAL LBS/1000 FT, METHOD OF MANUFACTURE: COLD

FORMED, SPECIFICATIONS TUBE: OD: 0.25 IN, WELDED AND ROLL REDUCED,

ELECTRICAL WALL THICKNESS: 0.035 IN, MATERIAL: INC, PROPERTIES:

CONDUCTOR, 825, INSULATOR: RESISTANCE: 4.35 OHMS/1000, SIZE: 2.57 MM

NOMINAL, MATERIAL: TEFZEL (ETFE), OHMS/1000 FT @ 150 DEG C, IP-1300,

FILLER: TUBE RESISTANCE: 15, OHMS/1000 FT @ 20 DEG C, SIZE: 3.86 MM

NOMINAL, 16.8 OHMS/1000 FT @ 150, MATERIAL: DEG C, CAPACITANCE: 27.9, IP-

1030, ENCAPSULATION: DIMENSION: 11 MM X 11 MM, PICO FARDS/FT @ 20 DEG

C, 31.7 PICO FARADS/FT, MATERIAL: NYLON @ 150 DEG C, INSULATION RATING:

6, YIELD RESISTANCE: 15,000 M, STRENGTH: 106,000 PSI, OHMS/1000 FT,

VOLTAGE ULT, TENSILE STRENGTH: 123,000 PSI, COLLAPSE RATING: 1,000 VDC.

MAX, CURRENT: 2.4 A, VELOCITY PRESSURE: >20,000 PSI, BURST PRESSURE:

>29,000 OF PROPAGATION: 69.1, ENCAPSULATION PSI, CRUSH RESISTANCE:

22,300 LBS, SURFACE PROPERTIES: TEMPERATURE, FINISH: 12.9 MICRON,

RATING: 150 DEG C, HARDNESS: 50 (SHORE D), WATER ABSORPTION, (GRAM/1SQ

MM, 0.5 MM THK: 0.45 GRAM (ASTM 96-A,1.61 GRAM (ASTM 96-BW, TENSILE

STRENGTH: 4,003 PSI, ELONGATION: 600%.

1000840502

383

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,4-

1/2",BLADERUNNER,5.750"OD

CENTRALIZER CASING; BLADE RUNNER TYPE,4-1/2 IN X 6-1/8 IN (OD 5-3/4 IN)

CASING,TYPE: SOLID BODY, SLIP ON. BLADES: 5 X SPIRAL RIGHT HAND. MATERIAL:

ZINC-ALLOY/TEFLON. WEIGHT (KG): 4.6. FLOW-BY (SQ INS): 8.12.


1000886160





9COM/9CAT

384

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,7",SPIROLIZER,8.25

0"OD

CENTRALIZER CASING; SLIP-ON, SOLID BODY, SPIR-O-LIZER TYPE,7 IN X 8-1/2 IN

CASING,8-1/4 IN BOW OD,STYLE 5-BLADE, SPIRAL,INTERNAL DIA.: 7-1/8 INCH,

WALL THICKNESS: 3/16 INCH, LENGTH: 10 INCH, WEIGHT: 6.10 KG, BLADES: 5 X

SPIRAL, BLADE ANGLE: 25O, BLADE LEAD IN: 2-1/2 INCH, BLADE LEAD OUT: 1-1/2

INCH, MATERIAL: ZINC ALLOY, USE WITH 2 EACH DUCTILE IRON SPIR-O-LOK STOP

COLLARS, WITH MATERIAL NUMBER 1000XXXXX, ITEMS MUST BE BOXED AS AN

INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE PER SAUDI ARAMCO PACKAGING

SPEC 844418. MANUFACTURER MUST BAR CODE IDENTIFY EACH ISSUE UNIT ON

BOTH THE MATERIAL AND OUTSIDE THE CONTAINER IN WHICH THE ISSUE UNIT IS

CONTAINED. CODE TO BE IN THE INTERNATIONAL CODE 39 BAR CODING SYSTEM

FORMAT AND ADHERE TO ANSI MH10.8 ( LATEST EDITION) SPECIFICATION (LESS

SECTIONS 12 & 13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK

NUMBER AND PURCHASE ORDER NUMBER.

1000803582

385

Drilling Equipment

(Advanced Well

Completion

Equipment)


GAUGE,DUAL PORT

GAUGE; PDHMS-PERMANENT DOWNHOLE MEASUREMENT TYPE,175/150

RANGE,SIZE 3-1/2 IN,INCONEL 718,DAUL AND SINGLE SURE SENS 150 -PDHMS-

PERMANENT DOWNHOLE MEASUREMENT SYSTEM .DUAL TUBING/ANNULUS

GAUGE ASSEMBLY : EUE KIT COMPONENTS

1000908043

386

Drilling Equipment

(Downhole

Equipment)


35#,HYD,1.98DG

WHIPSTOCK; SHALLOW ANGLE QUICK CUT (SAQC) TYPE,5-1/2 IN DIAMETER BODY

STD,HYDRAULIC SET TRIP,7 IN CSNG DRE,23-35 LB/FT CSNG DRE,WEATHERFORD

WHIPSTOCK, QUICK CUT, SHALLOW ANGLE HYDRAULIC RETRIEVABLE TYPE, 5-1/2

IN OD BODY, MULTI-CATCH ANCHOR, 1.98 DEGREE WHIP FACE FOR 7 IN 23-35

LB/FT CASING

1000769303

387

Drilling Equipment

(Downhole

Equipment)

PBR/SEAL,4-

1/2",VTHC,15.1#,41XX-95,24FT

RECEPTACLE: RETRIEVABLE, 5.820 IN X 3.762 IN X 15.1 LB, 4130/4140, 18-22 HRC

EXCEPT LOCATOR, SPACER TOP SEAL RECEPTACLE; RETRIEVABLE TYPE,SIZE 5.820

IN X 3.762 IN X 15.1 LB,4130/4140, 18-22 HRC EXCEPT LOCATOR, SPACER, TOP

SEAL MANDREL, AND PBR B-SUB AD WHICH MUST BE AS FOLLOWS AISI 41XX

W/MODIFIED CHEM F PER API GRADE T-95, 95 KS MIN YIELD, Q & T, 25 HRC MAX

FOR H2S SERVICE PER NACE MR-01-75 (LATEST REV) SSC TEST TM-01777 IS NOT

REQUIRED.,NACE MR-01-75,EACH ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL

UNIT WITH COMPONENTS AS LISTED IN SAMS CATALOG. KITS COMPONENTS

1000025605





9COM/9CAT

388

Drilling Equipment

(Downhole

Equipment)

PBR/SEAL,4-

1/2",VTHC,13.5#,41XX-95,25FT

7 IN. X 4 IN. RETRIEVABLE PACKER BORE RECEPTACLE W/INTEGRAL 'KTR' SEAL

ASSY; 4-1/2 IN,13.5 LB/FT VAM TOP HC BOX RECEPTACLE; RETRIEVABLE PACKER

BORE TYPE,SIZE 3.720 IN ID X 5.875 IN OD X 13.5 LB/FT,41XX-95 KSI (25 HRC

MAX), (BMS A-152) HT PLUS Q&T,NACE MR-01-75 (LAST REV.),FOR H2S SVC,FOR

USE W/7 IN. FAB-1 PACKER EACH ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL

UNIT WITH COMPONENTS AS LISTED IN TH SAMS CATALOG, CONSISTING OF

COMPONENTS AS DETAILED IN KITS SECTION. KITS COMPONENTS

1000025604

389

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,4-1/2X9-

5/8,VTHC,13.5#,P110

HANGER LINER; GR P-110,7 IN END 1,32 PPF END 1,9-5/8 IN END 2,53.5 PPF END

2,VAM-SIIJ-II END CONN,VAM-SIIJ-II,X-PAK LINER HANGER EQUIPMENT FOR 7 IN,

32 PPF BY 9-5/8 IN, 53.5 - 58.4 PPF LINER KIT COMPONENTS1000888136

390

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,4-

1/2X6.125"OH,SLIPON

PACKER PRODUCTION; SLIDE ON PIPE OH SWELL PACKER TYPE,5.625 IN OD,3.958

IN ID,4-1/2 IN OD,NA (SLIDE ON PIPE) CONNECTN KIT COMPONENTS 1000844947

391

Drilling Equipment

(Downhole

Equipment)

PACKER,TIEBACK,7",NK3SB,32#,P

110,TBR12FT

PACKER, LINER: PACKER, LINER TOP, GEN-2 TYPE SN-AT-12 HI-LOAD FOR

DEVIATED & VERTICAL KHUFF GAS WELLS PACKER LINER; PACKER, LINER TOP,

GEN-2 TYPE SN-AT-12 HI-LOAD FOR DEVIATED & VERTICAL KHUFF GAS WELLS

WITH LG-12 TBR KIT COMPONENTS: ITM(1) P/N 621333 PACKER: LINER TOP, TYPE

SN-AT-12 HI-LOAD SLIPS FOR TYPE LG-12 TBR, 7 IN 32# X 9-5/8 IN 53.5 W/NK-3SB

BOX UP, W/6 FT PORTED NIPPLE & FULL MULESHOE BOTTOM, 3 SETS ATR SEALS

FOR 7.375 IN I.D. TBR, W/AFLAS PI-PO PKR (10M PSI DP) AND HOLD DOWN SLIPS,

41XX - 110,000 PSI MIN. YIELD (P-110), 6.094 IN MIN I.D., 6.0 IN DRIFT ID. KITS

COMPONENTS

1000025009

392

Drilling Equipment

(Downhole

Equipment)

SCREEN,WIRE,7",LTC,26#,0.012",I

NJECTION

WELL SCREEN: . . SCREEN; CASING WELL TYPE,304 SS,WIRE WRAPPED, RIBBED,

DRILLED HOLE, 0.012 IN OPENINGS, 24 IN BLANK ON EACH END, TO BE WRAPPED

ON 7 IN OD 26 LB/FT GR J/K-55 8RD LT & C RANGE 2 CASING WITH THD

PROTECTORS INSTALLED ON ON BOTH ENDS BEFORE SHIPMENT

1000032752

393

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,13-

3/8",BOWSPR,HINGED,19.88"

CENTRALIZER: CASING; FOR 13-3/8 IN. OD CASING; TO FIT INSIDE 18-5/8 IN.

CASING. CENTRALIZER CASING; STRAIGHT SPRING TYPE,18-5/8 IN CASING,13-3/8

IN OD,19.8800 IN BOW OD,STYLE NON-WELDED HINGE,48.0-102.0 LB/FT,TYPE "ST-

IV", WITHOUT HINGE PINS

1000022660





9COM/9CAT

394

Drilling Equipment


Cementing

Equipment)

SHOE,FLOAT,18-5/8",BTC,87.5-

115#,K55

SHOE, FLOAT: FOR 18-5/8 IN OD CASING 87.5-115 LB/FT API 5B BUTTRESS

THREAD, K-55 SHOE FLOAT; FOR 18-5/8 IN OD CASING, 87.5-115 LB/FT API 5B

BUTTRESS THREAD, K-55 "PDC DRILLABLE" 1000025919

395

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,4-

1/2X7,VTHC,13.5#,C95,HYD

HANGER: LINER ASSEMBLY; 4.5 IN. 13.5# VAM TOP HC X 7 IN 29-35# 'TSP' HYDRO-

HANGER RRP-TSP 3.920" MIN ID, GEN-2, FOR KHUFF HANGER LINER; HYDRAULIC

ACTIVATI,FOR H2S SOUR SERVICE,GR 41XX- 95000 MYS (C-95),4- 1/2 IN END

1,13.5 LB/FT END 1,7 IN END 2,29-35 LB/FT END 2,VAM TOP HC PIN X PIN END

CONN,NACE MR-01-75,TIW TYPE "TSP", FOR 4.5 GENERATION-2 KHUFF LINER

HANGER SYSTEM COMPLETE ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL UNIT

WITH ITS COMPONENTS AS LISTED BELOW KITS COMPONENTS

1000024316

396

Drilling Equipment

(Downhole

Equipment)

VALVE,SAFETY,9-

5/8,VAM21,10K,TRSSSV+CL

EQUALIZER; 9-5/8 IN, 10,000 PSI PRESSURE RATING, TUBING-RETRIEVABLE

SAFETY VALVE ASSY COMPLETE WITH ACCESSORIES 1000831437

397

Drilling Equipment

(Downhole

Equipment)

PBR/SEAL,4-

1/2",NK3SB,13.5#,41XX-95,10FT

SEAL ASSY; SIZE 4-1/2 IN, TO LOCATE AT TOP OF 4-1/2 IN SETTING SLEEVE AND

SEAL 4-1/2 IN PBR. SEAL; PBR SEALS TYPE,SIZE 4-1/2 IN,(BMS A-152) 41XX-HC95

MYS MATERIAL FOR HT SOUR SERVICE (T-95EQUIVALENT-NACE TEST TM0177

WAIVED),TO LOCATE AT TOP OF 4-1/2 IN SETTING SLEEVE. KITS COMPONENTS

1000644370

398

Drilling Equipment

(Advanced Well

Completion

Equipment)

SCREEN,MESH,4-

1/2,NVAM,11.6#,250MIC

SCREEN; STAND ALONE PREMIUM SCREEN TYPE,SIZE 4-

1/2IN,316SS,SCHLUMBERGER PREMIUM SCREEN SYSTEM,L-80, R3, THREAD

250MICRON MESH1000903439

399

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,9-

5/8X14,FJL,53.5#,718,HYD

HANGER LINER; 9-5/8 IN END 1,9-5/8 IN END 2,53.3 LB END 2,9-5/8 IN, 53.3 PPF X

14 IN, 114 PPF BAKER CSG LINER HANGER AND ACCESSORIES. KIT COMPONENTS 1000830502

400

Drilling Equipment

(Downhole

Equipment)


3/8,NK3SB,53.5#,HY

HANGER LINER; HYDRAULIC ACTIVATI,9-5/8 INCH END 1,53.5 LB/FT END 1,13-3/8

INCH END 2,86.0-92.0 LB/FT END 2,#9-5/8 IN X 13-3/8 IN LINER HANGER SYSTEM

KIT COMPONENTS

1000903460

401

Drilling Equipment

(Advanced Well

Completion

Equipment)

KIT,ICD+DUAL P/T GAUGES,3-

1/2",4140/L80

ASSEMBLY; 3 1/2 IN. COMPACT INTERGRATED COMPLETION SYSTEM

TYPE,CONSISTING OF 3 1/2 IN. INFLOW CONTROL VALVES WITH ABSOLUTE

POSITION SENOR AND DUAL TUBING/ANNULUS P/T GAUGES. MATERIAL: 4140/L-

80

1000888959





9COM/9CAT

402

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,18-


CENTRALIZER: CASING; FOR 18-5/8 IN. OD CASING; TO FIT INSIDE 24- - IN. HOLE. .

CENTRALIZER CASING; STRAIGHT SPRING TYPE,24 IN CASING,18-5/8 IN

OD,23.7000 IN BOW OD,STYLE NON-WELDED HINGE,78.0-122.0 LB/FT,TYPE "ST-

III", WITHOUT HINGE PINS

1000022661

403

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,4-

1/2X7,VTHC,13.5#,95,HYD

HANGER LINER; HYDRAULIC ACTIVATI,4.500 IN END 1,13.50 PPF END 1,7.00 IN

END 2,20.0 - 35.0 PPF END 2,4.500 IN 13.50 PPF VAM TOP HC PIN UP 4.500 IN

13.50 PPF VAM TOP HC PIN DOWN 07.000 IN 20.0-35.0 PPF,4-1/2 IN X 7 IN

CONTROL SET LINER HANGER FOR UDILIYAH GAS. SIZE: 4.5 IN (13.5 PPF) X 7.00 IN

(20-35 PPF) VTHC PXP. MAX OD: 5.819 IN. MIN ID: 3.830 IN. LENGTH: 10 FT.

ROTATING: YES. MATERIAL: 95 KSI MYS. LINER SIZE IN INCHES: 4.500 IN X 7.00 IN.

LINER THREAD: VTHC. LINER WEIGHT, (WEIGHT RANGE IF APPLICABLE), IN PPF:

13.5 PPF. PARENT CASING SIZE IN INCHES: 7.00 IN. PARENT CASING WEIGHT,

(WEIGHT RANGE IF APPLICABLE), IN PPF: 20-35 PPF. STEEL GRADE:95 KSI MYS.

SETTING METHOD (MECHANICAL/HYDRAULIC): HYDRAULIC. ROTATABLE WHILE

CEMENTING, YES/NO: NO. APPLICATION, GAS/OIL/WATER: GAS. KIT

COMPONENTS

1000917506

404

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,9-

5/8",SPIROLIZER,11.875"OD

CENTRALIZER CASING; SLIP-ON, SOLID BODY, SPIR-O-LIZER TYPE,9-5/8 IN X 12-1/4

IN CASING,11-7/8 IN BOW OD,STYLE 5-BLADE, SPIRAL,INTERNAL DIA.: 9.77 INCH,

WALL THICKNESS: 0.30 INCH, LENGTH: 10 INCH, WEIGHT: 13.9 KG, BLADES: 5 X

SPIRAL, BLADE ANGLE: 25O, BLADE LEAD IN: 3-1/2 INCH, BLADE LEAD OUT: 2-1/2

INCH, MATERIAL: ZINC ALLOY, USE WITH 2 EACH DUCTILE IRON SPIR-O-LOK STOP

COLLARS, WITH MATERIAL NUMBER 1000XXXXX, ITEMS MUST BE BOXED AS AN

INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE PER SAUDI ARAMCO PACKAGING

SPEC 844418. MANUFACTURER MUST BAR CODE IDENTIFY EACH ISSUE UNIT ON

BOTH THE MATERIAL AND OUTSIDE THE CONTAINER IN WHICH THE ISSUE UNIT IS

CONTAINED. CODE TO BE IN THE INTERNATIONAL CODE 39 BAR CODING SYSTEM

FORMAT AND ADHERE TO ANSI MH10.8 ( LATEST EDITION) SPECIFICATION (LESS

SECTIONS 12 & 13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK

NUMBER AND PURCHASE ORDER NUMBER.

1000803584

405

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,9-


CENTRALIZER: CASING; FOR 9-5/8 IN. OD CASING; TO FIT INSIDE 13-3/8 IN.

CASING. CENTRALIZER CASING; STRAIGHT SPRING TYPE,13-3/8 IN CASING,9-5/8 IN

OD,14.5830 IN BOW OD,STYLE NON-WELDED HINGE,40.0-71.8 LB/FT,TYPE "ST-III",

WITHOUT HINGE PINS

1000022639





9COM/9CAT

406

Drilling Equipment

(Downhole

Equipment)

SEAL,PRODUCTION,9-

5/8",VAM21,53.5#,718

SEAL; SNAP IN-SNAP OUT TYPE,SIZE 9-5/8 IN,INCONNEL 718, 120 KSI MYS,9 5/8

INCH SNAP IN-SNAP OUT SHEAR. RELEASE ANCHOR PRODUCTION SEAL

ASSEMBLY. SIZE: 9 5/8 INCH, 53.5 PPF, THREADS: VAM 21 BOX UP X 1/2 MULE

SHOE. MATERIAL: INCONNEL 718, 120 KSI MYS. TOOL OD: 12.130 INCH, TOOL ID:

9.398 INCH

1000830501

407

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,4-

1/2X7",NVAM,11.6#,L80,NCE

LINER; NON CEMENTED KIT TYPE,4-1/2 IN OFF BOTTOM NON- CEMENTING KIT.

FOR 7 IN 26# CASING AND 6-1/8 IN OPEN HOLE CONSIST OF: ITEM QUANTITY

DESCRIPTION 01 01 Baker SLZXP Liner Hanger/Packer Size: 5 IN. 18b/ft X 7 IN. 23-

29Lb/ft Thread: 5 IN. 18lb/ft New Vam Box Down Extension I.D.: 5-1/4 IN. Tool

O.D.: 6.060 IN. Tool I.D.: 4.276 IN. Extension Length: 10 feet PART# H296350005

02 01 Baker #PBR# Style Locator Seal Assembly Size: 5.250 IN. X 4-1/2 IN. 11.6

lb/ft Thread Connection: New Vam Box Up X ½ Mulshoe Length: 10 ft effective

Seal Stroke Material: L-80 Seal: Bullet Style Premium Seal Material: L-80 PART#

H297550798 03 01 Baker Bull plug Size: 4-1/2 IN. 11.6lb/ft Thread Connection:

New Vam Box Tool O.D.: 5.000 IN. Material: L-80 PART# H485-30-4512

1000751070

408

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,4-

1/2X8.00",VTHC,13.#,P110

PACKER; SWELLPACKER SP OS H2S TYPE,#SWELLPACKER, OIL SWELLING, 6A,

H2S,#4.5IN, 13.5LBS, API GRADE P-110#LOW ALLOY STEEL, VAMTOP-HC, BOX

X#PIN, 12M BASEPIPE X 8IN ELEMENT OD#X 9M ELEMENT LENGTH

1000917808

409

Drilling Equipment

(Downhole

Equipment)

NIPPLE,LANDING,4-

1/2",VAM,X,SL,3.813"ID

NIPPLE: LANDING; 5.03 IN. OD X 3.813 IN. ID X 18.05 IN. LG; 4-1/2 IN. 12.6 LB/FT

VAM BOX UP X NIPPLE LANDING; X (SELECTIVE) TYPE,9% CHROMIUM - 1%

MOLYBDENUM,L-80,FOR H2S & CO2,API-Q1/ISO 9001 AND API 14L/ISO 16070

COONECTN,POLISHED BORE,3.813 IN ID,5.030 IN OD,18.05 IN LG,4-1/2 IN TUBING

OD,12.60 LB/FT,VAM BOX UP X PIN DOWN,API 5B, API-Q1/ISO 9001, API 14L/ISO

16070, NACE MR-01-75,HES NO 711X38107 MADE TO: NACE MR-01-75 (LATEST

EDITION)

1000024620

410

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-


HANGER, LINER: HYDRAULIC ACTIVATION, HORIZONTAL & HIGH ANGLE

COMPLETIONS SERVICE, L-80, 7 IN END 1, 26 LB/FT END HANGER LINER;

HYDRAULIC ACTIVATI,FOR HORIZONTAL & HIGH ANGLE COMPLETIONS,GR L-80,7

IN END 1,26 LB/FT END 1,9-5/8 IN END 2,40-47 LB/FT END 2,7 IN 26 L/FT NEW

VAM PIN X PIN END CONN,API 5B,BASE MATERIAL: L-80, TOTAL WEIGHT: 550

KGS, VOLUME: 25 CU. FT. COMPLETE UNIT MUST BE BOXED AS AN INDIVIDUAL

UNIT WITH ITS COMPONENTS AS LISTED BELOW. KITS COMPONENTS

1000645123

411

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X3-

1/2,VTOP,10.2#,718,FTHRU

PACKER PRODUCTION; XMP MULTI PORT, FEED-THROUGH TYPE,6.00 IN OD,2.88

IN ID,7 IN OD,26-29 PPF,3-1/2 IN CONNECTN,10.2 PPF,VAM TOP

COONECTN,MATERIAL INC 718 , ELEMENT AFLAS(90-80-90), WP:7500PSI AND

WT:350 DEGF, 4 X 1/4 IN FEEDTHROUGH

1000888236





9COM/9CAT

412

Drilling Equipment


Cementing

Equipment)

DV TOOL,24",RL4S,176#,X42,MEC

TOOL; SIZE 24 IN,STYLE MECHANICAL STAGE,X-42, RL-4S, 176 PPF, 22.19 IN MIN

DRILLOUT ID, BOTTOM PLUG WITH RUPTURE DISK, SHUT OFF PLUG WITH

LANDING COLLAR, FREE FALL OPEN CONE AND CLOSING PLUG, NOT PDC

DRILLABLE

1000830132

413

Drilling Equipment

(Downhole

Equipment)


1/2,NVAM,12.6#,RET

PACKER PRODUCTION; 'QHSB' HYDRAULIC SET RETRIEVABLE TYPE,FOR H2S,

CO2,HYDRAULIC SET ACTIVATI,8.445 IN OD,4.747 IN ID,9-5/8 IN OD,40-47

LB/FT,5.250-4TPI LEFT HAND SQUARE THREAD(TOP) X 4-1/2 IN 12.6 PPF L-80 NEW

VAM PIN DOWN CONNECTN,12.6 LB/FT (BOTTOM),LEFT-HAND SQUARE

THREAD(TOP) NEW VAM PIN (DOWN) COONECTN,6,000 PSI SUPPLY,NACE MR 01-

75,CARBON STEEL 4130/4140 FLOW WETTED NITRILE ELASTOMER, NITRILE O-

RINGS. KIT COMPONENTS

1000810364

414

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,4-

1/2X7,NVAM,11.6#,L80,MEC

HANGER LINER; MECHANICAL ACTIVATI,FOR STANDARD,GR L-80,4-1/2 IN END

1,11.6 LB/FT END 1,7 IN END 2,26 LB/FT END 2,NEW VAM BOX UP X MULE SHOE

END CONN,NON-CEMENTED SYSTEM, SCHLUMBERGER LINER HANGER SCREEN,

HANGER SYSTEM FOR 7 IN CASING CONSISTS OF THE FOLLOWING: 1. TIE BACK

STEM SYSTEM WITH BULLET SEAL, FOR 10 FT EXTENSION 2. POLISHED BORE

RECEPTACLE (PBR) 3. R-SETTING SLEEVE WITH XTS LINER TOP PACKER, PACK-OFF

NIPPLE AND MECHANICAL LOCK 4. HYDRAULIC ROTATING DOUBLE CONE LINER

HANGER WITH PTFE/CARBON SEALING ELEMENT IN CYLINDER AND HANGER 5.

SEATING BALL KIT COMPONENTS

1000827948

415

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,4-

1/2X6.125"OH,NVAM,12.6#

PACKER PRODUCTION; OH SWELL PACKER TYPE,5.625 IN OD,3.958 IN ID,6-1/8 IN

HOLE OD,4-1/2 IN CONNECTN,12.6 PPF,NEW VAM BOX X PIN COONECTN,4-1/2 IN

SWELL REPACKER, BASE PIPE MATERIAL: L-80 STEEL, SEAL MATERIAL: OIL SWELL

ELEMENT, SEAL LENGTH: 20 FT, JOINT LENGTH: 30 FT.

1000844948

416

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,NVAM,26#,CRA,HYD

HANGER LINER; HYDRAULIC ACTIVATI,7 IN END 1,26 LB/FT END 1,9-5/8 IN END

2,40-47 LB END 2,NEW VAM END CONN,CONTROL SET LINER HANGER WITH ZXP

LINER TOP PACKER AND FLEX LOCK LINER HANGER ASSEMBLY CONSISTING OF:

ZXP LINER TOP PACKER 7 IN, 26 LB/FT X 9-5/8 IN 40-47 LB, WITH HOLD DOWN

SLIPS SIZE: 7 IN X 9-5/8 IN 40-47 LB, EXTENSION SIZE: 15 FT, MAX TOOL OD: 8.453

IN, MIN TOOL OD: 6.278 IN, MIN. BURST: 8,251 PSI, MIN. COLLAPSE: 5,376 PSI,

TENSILE LOAD: 602,351 LBS, ELEMENT RATING: 10,000 PSI AT 400 DEG F,

ELEMENT RATING: 17 BPM CIRCULATION RATE, MATERIAL: 22 RC, 80 KSY MYS.

KIT COMPONENTS

1000827579





9COM/9CAT

417

Drilling Equipment

(Downhole

Equipment)

VALVE,ICV,2-

7/8",EUE,6.5#,41XX,FCV004

VALVE; TUBING RETRIEVABLE FLOW CONTROL-HYDRAULIC TYPE,SIZE 2-7/8 IN,2-

7/8 IN 6.5 PPF EUE BOX X PIN END CONN,INC718 BODY,INC718, 9CR-1MO,

4140/4130 TRIM,EXTERNAL WORKING PRESSUR: 7500 PSI, INTERNAL DIA.: 2.250

IN MIN, DRIFT ID: 2.245 IN, LENGTH: 194 IN, MAX FLOW RATE: 25000 BBL/DAY,

MAX WORKING TEMP.: 325°F, MIN WORKING TEMP.: 40°F, MINOR OD: 4.530 IN,

OD: 4.530 IN, OD: 5.125 IN MAX, SEAL BORE SIZE: 2.250 IN. THE TUBING

RETRIEVABLE FLOW CONTROLLER SYSTEM PROVIDES REMOTELY ACTUATED

DOWNHOLE CONTROL OF FLOW FROM THE RESERVOIR IN INTELLIGENT

COMPLETIONS. THE SYSTEM MUST BE OPERATED BY A 0.25-IN HYDRAULIC

CONTROL LINE THAT IS ROUTED FROM THE SURFACE CONTROLS TO THE CHOKE

SECTION OF THE TOOL.

1000782149

418

Drilling Equipment

(Downhole

Equipment)


35#,MEC,1.98DG

WHIPSTOCK; SHALLOW ANGLE QUICK CUT TYPE,5-1/2 IN DIA BODY

STD,MECHANICAL TRIP,7 IN CSNG DRE,23-35 LB/FT CSNG DRE,WEATHERFORD

WHIPSTOCK, QUICK CUT, SHALLOW ANGLE MECHANICAL RETRIEVABLE TYPE, 5-

1/2 IN OD BODY, MULTI-CATCH ANCHOR, 1.98 DEGREE WHIP FACE FOR 7 IN 23-

35 PPF CASING

1000769301

419

Drilling Equipment

(Downhole

Equipment)

SEAL,9-

5/8",VAM21,53.5#,725/625,R-

LATCH

NIPPLE LANDING; NIPPLE: RATCH LATCH C/W SEAL ASSEMBLY KIT COMPONENTS,

ITEM 1, QTY. 1EA, SHEAR -TO-LATCH RATCH LATCH SEAL ASSY, 10000 PSI, 9-5/8

IN, 53.5 PPF, VAM 21 BOX X MULE SHOE GUIDE, KTR SEAL STACK, 12.13 IN OD X

8.535 IN ID, MATERIAL: NICKEL ALLOY 725 / 625+ FOR ELEMENTAL SULPHUR,

H2S/CO2 SERVICE. ITEM 2, QTY. 1EA, RATCH LATCH SEAL NIPPLE, 10.375-6 R/L

BOX 9-5/8 IN, 53.5 PPF, VAM 21 PIN, 10000 PSI WORKING PRESSURE, 12.13 IN OD

X 8.535 IN ID, MATERIAL: NICKEL ALLOY 725/625+ FOR ELEMENTAL SULPHUR,

H2S/CO2 SERVICE.

1000831428





9COM/9CAT

420

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,5-1/2X9-

5/8",NVAM,17#,NONCEMEN

LINER; NON CEMENTED KIT TYPE,5-1/2 IN OFF BOTTOM NON- CEMENTING KIT.

FOR 9-5/8 IN 43.5 # CASING AND 8-1/2 IN OPEN HOLE, PDC DRILLABLE CONSIST

OF: ITEM QUANTITY DESCRIPTION 01 01 PBR Seal Assembly with Bullet Seals Size:

7.500 IN. X 5-1/2 IN. 15.5 lb/ft For 15 ft extension Thread connection: New Vam

Box Up X ½ Mulshoe Seal O.D.: 7.500 IN. Tool I.D.: 4.892 IN. Length: 10 ft effective

Seal Stroke Material: L-80 PART# H297550652 02 01 Baker #SLZXP# Liner Top

Packer w/ HR Profile and 15ft Tie-Back Sleeve Size: 7 IN. 26 lb/ft Thread

Connection: New Vam Pin Down PBR Extension O.D. 8.250 IN. (8.312 IN. Tool

O.D.) PBR Extension I.D.: 7.500 IN. Tool I.D.: 6.276 IN. as per 26# casing Spec

Material: L-80 PART# H296350015 ITEM QUANTITY DESCRIPTION 03 01 Baker

Casing Sub Size: 7 IN. 26lb/ft X 5-1/2 IN. 17lb/ft Thread Connection: New Vam Box

X Pin Tool O.D.: 7.656 IN. Tool I.D.: 4.892 IN. Material: L-80 PART# H494016798 04

01 Baker O-ring Seal Sub Size: 5-1/2 IN. 17 lb/ft X 2.875 IN. Bore Thread

Connection: New Vam Box X Pin Tool O.D.: 7.390 IN. Tool I.D.: 4.000 IN. Material:

L-80 PART# H485355525 05 01 Baker Pup Joint Size: 5-1/2 IN. 17 lb/ft. 6 feet long

Thread Connection: New Vam Box x Pin Tool O.D.: 6.050 IN. Tool I.D.: 4.892 IN.

Material: L-80 PART# H494032302 06 01 Baker #BPV# Set Shoe Size: 5-1/2 IN. 17

lb/ft Thread Connection: New Vam Box X Pin Tool O.D.: 6.050 IN. Material: L-80

PART# H487365502

1000751071

421

Drilling Equipment

(Downhole

Equipment)

PACKER,LINER,7",NVAM,26#,L80,

TBR 6FT

PACKER; WMPO WEIGHT TYPE,SIZE 7 IN. 26# X 9-5/8 IN, "WMPO" WEIGHT SET

PACKER, 6 FT LONG TIE-BACK RECEPTACLE CONSISTING OF: MODEL "WMPO"

WEIGHT SET PACKER ,OD 8.375 IN X ID 6.276 IN, FITTED WITH 6 FT LONG TIE-

BACK RECEPTACLE, RCB PROFILE OD 8.250 IN, ID 7.375 IN, WITH 7 IN. 26# NEW

VAM PIN, L-80 MATERIAL, NITRILE PACKING ELEMENT.

1000771958

422

Drilling Equipment


Cementing

Equipment)

COLLAR,FLOAT,13-3/8",VAM

TOP,72#,HC95

COLLAR: FLOAT, 13-3/8 IN 72 LB, HC95 GRADE, VAM TOP, W/12.25 IN DRILL OUT

ID . COLLAR FLOAT; CEMENTING TYPE,STYLE PLASTIC SEAT,13-3/8 IN OD,72

LB/FT,VAM TOP,12.25 IN DRILL ID,WITH PLASTIC VALVE "PDC DRILLABLE" 1000624815

423

Drilling Equipment

(Advanced Well

Completion

Equipment)


GAUGE,P+T

ASSEMBLY; MONITORING TYPE,PERMANENT DOWNHOLE, DUAL, 3-1/2 IN KIT






9COM/9CAT

424

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,5-

1/2X8.50"OH,NVAM,17#,L80

PACKER PRODUCTION; SWELL TYPE,FOR OIL,5.5 IN OD,4.892 IN ID,17 PPF,NEW

VAM COONECTN,SWELLPACKER, 5.5 IN X 8 IN X 3 M, BASEPIPE OD: 5.5 IN,

BASEPIPE WEIGHT: 17 PPF, BASE MATERIAL: L80, THREAD TYPE: NEW VAM, END

RING MATERIAL: ST52, PACKER ELEMENT OD: 8 IN, PACKER ELEMENT LENGTH:

118.1 IN, TOTAL PACKER LENGTH: 236.2 IN, PACKER DRIFT ID: 4.767 IN, PACKER

NOMINAL ID: 4.892 IN, MINIMUM HANDLING SPACE BOX END: 47 IN, MINIMUM

HANDLING SPACE PIN END: 47 IN, COUPLING LENGTH: 11.693 IN, COUPLING OD:

6.075 IN, ENDRING LENGTH: 3.1 IN, ENDRING OD: 7.98 IN, MAX H2S LEVEL STD.

POLYMER: 0.5 %, HOLE SIZE: 8.5 IN

1000769400

425

Drilling Equipment

(Downhole

Equipment)


7/8,EUE,6.5#,PER

PACKER: PRODUCTION, FOR 4-1/2 IN, 9.5-12.6 LB/FT CASING 'TWR' WITH BIG

BORE, L-80 MATERIAL. PACKER PRODUCTION; 'TWR' PERMA-SERIES TYPE,FOR

H2S, CO2,HYDRAULIC SETTING TOOL ACTIVATI,3.79 IN MAX OD,2.375 IN ID,4-1/2

IN OD,9.5-12.6 LB/FT,2-7/8 IN CONNECTN,6.5 LB/FT,API EUE PIN

COONECTN,10,570 PSI SUPPLY,NACE MR-0175 KITS COMPONENTS: ITEM QTY

DESCRIPTION 01 01 EA TWR WIRELINE-SET PERMA-SERIES® PRODUCTION

PACKER, RATCH-LATCH HEAD, TUBING THREAD, 4 1/2 IN. 9.5-12.6 AND 5 IN. 23.2-

24.2 LB/FT WEIGHT RANGE, 3.000 IN. SEAL BORE ID-MIN, 9CR-1MO MATL, 80000

PSI MIN YIELD, NITRILE RUBBER ELEMENT MATL, 3.790 IN. MAX OD, 2.375 IN.

MIN ID, 58.50 IN. LENGTH, H2S/CO2 SERVICE, 40-325 DEG. F, 10570 PSI PRESSURE

RATING, 2 7/8-6.50 API-EU PN: 101391704 (OLD PN: 212TWR4502-A) 02 01 EA

RLV RATCH-LATCH® SEAL ASSEMBLY WITH VTR SEAL, 3.000 IN. SEAL BORE ID-MIN,

9CR-1MO MATL, VITON/TEFLON/RYTON SEAL MATL, 2 7/8 API-EU BOX, 3.185-8

RTH LTH LH LATCH TYPE, 3.705 IN. MAX OD, 2.330 IN. MIN ID, 37.50 IN. LENGTH,

100-450 DEG. F, 7600 PSI PRESSURE RATING, H2S/CO2 SERVICE PN: 101391817

(OLD PN: 213RLV82-C)

1000589638

426

Drilling Equipment

(Downhole

Equipment)

PACKER,LINER,7",VTOP,29#,110K

SI,TBR 15FT

PACKER; ZXP LINER TYPE,#ZXP LINER TOP PACKER 7 IN 29 LB/FT X 9-5/8 IN 47-53.5

# , W/HOLD DOWN SLIPS#SIZE : 7 INCH X 9-5/8 INCH 47.0-53.5 # #RUNNING TOOL

: MECHANICAL "RH"#EXTENSION LENGTH : 15 FT #EXTENSION ID : 7.375 IN #MAX

TOOL OD : 8.312 IN #MIN TOOL ID : 6.100 INCH #ELEMENT RATING :10,000 PSI AT

400 F #ELEMENT RATING: 17BPM CIRCULATION RATE #THREAD : 7 INCH 29# VAM

TOP KSY MYS #MATERIAL : 33 RC , 110 KSY MYS .

1000891296





9COM/9CAT

427

Drilling Equipment


Cementing

Equipment)

COLLAR,FLOAT,9-

5/8",NK3SB,53.5#,T95

COLLAR: FLOAT; 9-5/8 IN 53.5 LB; T95 GRADE, NK-3SB W/8.5 IN DRILL OUT ID

COLLAR FLOAT; CEMENTING TYPE,STYLE PLASTIC SEAT,9-5/8 IN OD,53.5 LB/FT,NK-

3SB,8.5000 IN DRILL ID,WITH PLASTIC VALVE, T95 GRADE "PDC DRILLABLE" 1000022859

428

Drilling Equipment

(Downhole

Equipment)

PACKER,ACP,24",RL4S,176#,X42,

4FT

PACKER; ANNULUS CASING TYPE,SIZE: 24 IN, 4 FT DRVS, 25.90 IN OD, 176 PPF, X-

42, RL-4S 1000830133





9COM/9CAT

429

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,VTHC,32#,41XX,58.4#

HANGER LINER; 7-5/8 IN END 1,9-5/8 IN END 2,58.4 LB END2,RECEPTACLE) : 8.210

IN, NOMINAL OD (ELASTOMERS) : 8.205 IN,SEAL BORE ID-MIN (TIE-BACK

RECEPTACLE) : 7.624 IN, SEAL BORELENGTH -MAX (TIE-BACK RECEPRACLE) :

118.800 IN, MAXIMUM OD(SETTING SLEEVE) : 8.210 IN, NOMINAL ANNULAR BY

PASS AROUNDLINER HANGER (S.Q INCH): 2.993, MINIMUM ID: 6.780 IN,

NOMINALLENGTH : 347.248 IN, SETTING PRESSURE : 2745 PSI, BURST

PRESSUREABOVE ELASTOMERS (CALC) : 7468 PSI, BURST PRESSURE

ABOVEELASTOMERS REMARKS: 7-7/8 HST-DS-BOX, COLLAPSE PRESSURE

ABOVEELASTOMERS (CALC): 5309 PSI, COLLAPSE PRESSURE REMARKS : 7-7/8HST-

DS PIN TENSILE RATING ABOCE ELASTOMERS (CALC) : 385178 LBS,TENSILE

RATING ABOVE ELASTOMERS REMARKS : 7-7/8 HST-DS PIN,BURST PRESSURE

BELOW ELASTOMERS (CALC) : 8313 PSI, BURSTPRESSURE BELOW ELASTOMERS

REMARKS : 7.509 HST-DS BOX COLLAPSEPRESSURE BELOW ELASTOMERS (CALC):

8726 PSI, COLLAPSE PRESSUREBELOW ELASTOMERS REMARKS: BODY -POST

EXPANSION 58.4 LB, TENSILERATING BELOW ELASTOMERS (CALC ) : 747500 LB,

TENSILE RATINGBELOW ELASTOMERS REMARKS : 7.509 HST-DS PIN, TORQUE

RATINGMAXIMUM (FT-LBS) : 71043, TORQUE RATING REMARKS : 7.509 HST-

DSPIN HYDRAULIC SETTING TOOL-OPTION : 10152189(59VRT7096300),CONES

FOR OPTION 1 HYDRAULIC SETTING TOOL: 101625471 59V960049,REMARKS:

ADJUSTING SLEEVE 101637127 (59V960092) IS REQUIRED TORUN LINER HANGER

ID LENGTH MAX (TIE LINER HANGER ASSY VLH, 7-5/8IN 32-35 LB X 9-5/8 BACK

RECEPTACLE : 122.78 IN, 58.4 LB, TYPE:IN, EQUIPMENT NUMBER: 101633851,

PART NUMBER: STANDARD, CASINGSIZE: 59VF70965800-A 9-5/8 IN CASING

WEIGHT: 58.4 LB, MATERIAL:41XX LOW ALLOY STEEL, ELEMENT MATERIAL:

FLUOROCARBON RUBBER,TEMPERATURE RATING: 40 TO 275 DEG F, SERVICE:

STD, BOTTOMTHREAD: 7, CONNECTION TYPE: PIN, MAKE-UP TORQUE, LINER

HANGER :4528 FT-LBS (MINIMUM), BODY -UPPER(FT-LBS):

5032(OPTIMUM),5535(MAXIMUM) FOR 7-7/8 HST-DS, MAKE -UP TORQUE,LINER

HANGER :9043 FT-LBS (MINMUM), BODY -LOWER(FT-LBS) :

10048(OPTIMUM),11053(MAXIMUM) FOR 7.509 DS-HST, MAXIMUM OD: 8.21 IN,

MAXIMUM OD(TIE-BACKKIT COMPONENTS

1000828160

430

Drilling Equipment

(Advanced Well

Completion

Equipment)

LINE,FIBER OPTIC,50/125

SIZE,FOR DTS

LINE; FIBER OPTIC (GRADED INDEX MULTI-MODE) TYPE,SIZE 50/125,CARBON

POLYIMIDE,DISTRIBUTED TEMPERATURE FIBER OPTIC FOR SCHLUMBERGER

DISTRIBUTED TEMPERATURE SYSTEM. GEN II - 50/125 CARBON/POLYAMIDE MM

OPTICAL FIBER. FIBER TYPE: GRADED INDEX MULTI- MIODE, MAXIMUM

OPERATING TEMPERATURE: 175 DEF C, FIBER COATING MATERIAL: CARBON

POLYIMIDE.

1000845762





9COM/9CAT

431

Drilling Equipment


Cementing

Equipment)

DV TOOL,13-3/8",VAM TOP,72-

86#,Q125,MEC

TOOL; STAGE TYPE,SIZE 13-3/8 IN,ESIPC-P, 72-86 LBS/FT, VAM TOP - Q-125

COLLAR, TYPE P ES INFLATABLE PACKER, 13- 3/8 IN VAM TOP 72-86 LBS/ FT,

METAL BLADDER PACKER, SUITABLE FOR USE WITH Q-125 HC, CASING SIZE: 13-

3/8 IN, TYPE: P ESIPC, CASING WEIGHT: 72-86 LBS/FT, THREADER: VALLOUREC,

CASING THREAD: VAM TOP, GRADE: Q-125HC, DRILL OUT ID: 12. 279 IN, LENGTH:

82.07 IN, NET WEIGHT: 1031.9, MAX OD: 15.25 IN, PACKER TYPE: METAL, BURST

PRESSURE: 10233 PSI, COLLAPSE PRESSURE: 10233 PSI, PRIMARY OPENING

PRESSURE: 325 PSI, SECONDARY OPENING PRESSURE: 2200 PSI, CLOSING

PRESSURE: 910 PSI, TENSILE STRENGTH: 2601.631 KSI

1000828584

432

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,4-

1/2X7",NVAM,12.6#,NCEMENTE

D

LINER; NON-CEMENTED DEPLOYMENT, KIT TYPE,SIZE 4-1/2 INCH,C-SERIES

HYDRAULIC LINER SYSTEM, COMPLETE ASSMBLY WITH ITEMS AS DESCRIBED IN

KITS SECTION MUST BE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND

STORAGE PER SAUDI ARAMCO PACKAGING SPEC 844418. MANUFACTURER MUST

BAR CODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDE

THE CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO BE IN THE

INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND ADHERE TO ANSI

MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12 & 13). BAR CODE

TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBER AND PURCHASE ORDER

NUMBER. ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING. KIT

COMPONENTS

1000794892

433

Drilling Equipment

(Downhole

Equipment)


3/8,NK3SB,58.4#,HY

HANGER LINER; HYDRAULIC ACTIVATI,9-5/8 IN END 1,53.5 LB/FT END 1,13-3/8 IN

END 2,48-98 LB/FT END 2,NEW VAM PIN X PIN END CONN KIT COMPONENTS 1000825383

434

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,4-

1/2,NVAM,11.6#,L80,CEMENTED

HANGER LINER; 4-1/2 INCH END 1,NA END 2,TIW OFF BOTTOM LINER ASSEMBLY

WITH IB-TC HYDRO HANGERWITH S-10 LINER TOP PACKER AND ECP INFLATABLE

PACKER ASSEMBLY. KIT COMPONENTS

1000904741

435

Drilling Equipment

(Downhole

Equipment)

KIT,FRAC,5-1/2X8.5",VTHC,PK-SL-

PJ-CN

PACKER PRODUCTION; STAGE FRAC SYSTEM, FRAC STAGE ASSEMBLY TYPE,7.750

IN MAX OD,4.700 IN MIN ID,9-5/8 IN OD,43.5 - 58.4 LB/FT,5-1/2 IN CONNECTN,20

LB/FT,VAM TOP HC BOX X PIN, C/W COONECTN,10,000 PSI WORKING PRESSURE

SUPPLY,FOR OPEN HOLE: 8-3/8 IN - 8-1/2 IN, MATERIAL: P-110, PULL STRENGTH

THROUGH TOOL: 514,000 LBS, BURST PRESSURE: 10,750 PSI COLLAPSE PRESSURE:

10,300 PSI, EFFECTIVE SHEAR AREA: 8.500 IN2, SHEAR PRESSURE PER PIN: 341

PSI, MAX SHEAR PRESSURE: 4,092 PSI, MAX NUMBER OF SHEAR PINS: 12 PINS,

OVERALL LENGTH: 69.900 IN, WEIGHT: 322.79 LBS, ELASTOMER MATERIAL: HSN

1000823559





9COM/9CAT

436

Drilling Equipment

(Downhole

Equipment)

PACKER,TIEBACK,4-

1/2,NK3SB,13.5#,TBR12

PACKER, LINER: PACKER, LINER TOP, TYPE SN-12-AT HI-LOAD FOR GEN-1 AND GEN-

2, 4-1/2 IN LINERS W/ TYPE LG-12 PACKER LINER; PACKER, LINER TOP, TYPE SN-12-

AT HI-LOAD FOR GEN-1 AND GEN-2, 4-1/2 IN LINERS W/ TYPE LG-12 TBR KIT

COMPONENTS:

1000025007

437

Drilling Equipment

(Downhole

Equipment)

VALVE,ICV,2-

7/8",NVAM,5K,718,HVC+ACCUPU

L


SUPPLY,2-7/8 IN, 6.4# NEW VAM END CONN,INCONEL 718 / 4140 BODY,CASING

SIZE: 7 IN. (17# THRU 38#), MAXIMUM OD: 4.665 IN.(5.02 PROJECTED OD OFF

TUBING CENTER LINE), MINIMUM ID: 2.313 IN, LENGTH: 137.3 IN, 2-7/8 IN. 6.4#

(P-110 GRADE) NEW VAM TORQUE FT-LBF: 2,870 MIN, 3,180 OPT., 3,490 MAX, 2-

7/8 IN. 6.4# (L-80 GRADE) NEW VAM TORQUE FT-LBF: 2,160 MIN, 2,390 OPT.,

2,620 MAX, HVC THREAD: 2-7/8 IN, 6.4# NS-CT BOX X PIN THD, 3-1/2 10.2# NSCT

TORQUE FT-LBF: 2,065 MIN, 2,250 OPT., 2,435 MAX, SERVICE: STD/H²S/CO², MAX

WORKING TEMP: 275°F, WORKING PRESSURE INTERNAL: 7,500 PSI, WORKING

PRESSURE EXTERNAL: 7,500 PSI, TEST PRESSURE INTERNAL: 8,000 PSI, TEST

PRESSURE EXTERNAL: 8,000 PSI, MAX. HYDRAULIC PRESSURE: 10,000 PSI,

WORKING HYDRAULIC PRESSURE: 5,000 PSI, HVC CHOKE: 214HVC280003,

ACCUPULSE: 213APE702801, HVC METALLURGY: 718 INC., FITTING KIT

METALLURGY: 925 INC./4140, ACCUPULSE METALLURGY: 718 INC, FASTENER

METALLURGY: 300 SS, ELASTOMERS F/HYD. CHAMBER: V-RINGS E081 (PTFE), O-

RINGS (CHEMRAZ), BACK UP RINGS E080 (PEEK), ELASTOMERS F/ WELLBORE

FLUID: BACK UP RINGS E080 (PEEK), O-RINGS (VITON), PISTON AREA: 1.783 IN²,

TOTAL STROKE: 6.00 IN, HYD CHAMBER DISPLACEMENT: 10.69 IN³, TENSILE

RATING: 145,000 LBF, COMPRESSIVE RATING: 58,000 LBF, MIN. INTERNAL FLOW

AREA: 4.20 IN², FLOW AREA BETWEEN OD OF HVC AND ID OF CSG. 7 IN. (32#)

(6.094 ID): 14.75 SQ IN TOTAL(.910SQ. IN. OF TOTAL IS DUE TO SLOTS), FLOW

TRIM CHOKE SETTINGS: 11 POSITIONS (1 X FULLY OPEN, 1 X FULLY CLOSED, 9 X

FIXED) 0%, 2.38%, 3.57%, 5.90%, 9.43%, 14.09% 18.75%, 23.41%, 43.63%, 84.06%,

100%, COIL TUBING SHIFTING TOOL: 290HM0231000, ASSY PICTORAL/ BOM

DRAWING: 312499-01-01, TECH DOC: 312025-00-01.

1000780059





9COM/9CAT

438

Drilling Equipment

(Downhole

Equipment)

KIT,LINER,7X9-

5/8,TB,26#,HYD,NONCEMENTED

HANGER LINER; HYDRAULIC ACTIVATI,FOR SCREEN HANGING SYSTEM, NON-

CEMENTED KIT,GR L-80,7 IN END 1,26 LB/FT END 1,9-5/8 IN END 2,40-43.5 LB/FT

END 2,NEW VAM PIN DOWN END CONN,7" 26# TENARIS BLUE PIN X NEW VAM

PIN,'QUANTUM' NON-CEMENTED KIT TYPE, 8.465" OD X 6.240" ID, 40.175 INCH

LONG, 1, COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN KITS SECTION

MUST BE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE PER

SAUDI ARAMCO PACKAGING SPEC 844418, 2-MANUFACTURER MUST BAR CODE

IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDE THE

CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED, CODE TO BE IN THE


MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12 & 13), BAR CODE


NUMBER, ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING KIT

COMPONENTS

1000807104

439

Drilling Equipment

(Downhole

Equipment)

PACKER,LINER,7",LTC,23-

26#,L80,TBR 6FT

PACKER: LINER; TYPE S-6; WITH 6 FT TIE-BACK EXTENSION; . PACKER LINER;

WEIGHT SET TYPE,L-80,TYPE S-6 6 FT TIE-BACK,8.453 IN OD,7 IN LINER OD,23.0 -

26.0 LB/FT LINER,9-5/8 IN OD,36-40 LB/FT,8-1/4 IN EXT OD,7-3/8 IN EXT ID,LT & C

PIN DOWN COONECTN,API 5B,TO BE RUN ABOVE LINER HANGER, 8.250 IN TOOL

ID, SHEAR PINNED TO 15000 LB SET DOWN WEIGHT TO SET PACKER, TIW PART

NO 516543 EACH S/N MUST BE BOXED AS AN INDIVIDUAL UNIT (SEPARATELY)

1000024961

440

Drilling Equipment

(Advanced Well

Completion

Equipment)


GAUGE

UNIT; 4-1/2 IN, DUAL PERMANENT DOWNHOLE TYPE,BAKER HUGHES, 4-1/2 IN

PERMANENT DOWNHOLE MONITORING SYSTEM PDHMS WITH 4-1/2 IN NEW

VAM 12.6 PPF NEW VAM SINGLE CARRIER ITEM NO. QUANTITY DESCRIPTION 1.00

02 SINGLE 1 IN. WELLGUARD QUART PT GAUGE (2 PER WELL) HASTELLOY

HOUSING WITH INCONEL WETED PARTS RESONANT QUARTZ CRYSTAL

ELECTRONICS HOUSING WITH PRESSURE TESTABLE CABLE HEAD 10,000 PSI

PRESSURE RATING 150 DEG C RATING PRESSURE ACCURACY 0.02% FS AND DRIFT

<(><<)> 2 PSI / YR PRESSURE RESOLUTION = 0.01 PSI (TEMP RES 0.01 DEG C) 1.01

02 SINGLE SOLID GAUGE CARRIER (2 PER WELL) 4-1/2 IN. X 12.6 PPF NEW VAM

CONNECTIONS (PIN X PIN) 4140 L80 METALLURGY (YIED STRENGTH 288.000 LBS)

MAX. OD 5.889 IN DRIFT ID 3.833 IN. AND LENGTH OF 79 IN. DRAWING NUMBER:

GAD-00-8483 PART NUMBER: GA-00-8483 1.02 01 WELLHEAD OUTLET (1 PER

WELL) SAUDI ARAMCO APPROVED MODEL (5,000 PSI MINIMUM RATED) ½ IN.

NPT EEXD MODEL 1.03 02 TUBING HUNGER PENETRATOR (2 PER WELL) 3/8 IN.

NPT TO ¼ IN. SWAGELOCK CONNECTION

1000769328





9COM/9CAT

441

Drilling Equipment


Cementing

Equipment)

COLLAR,FLOAT,18-5/8",BTC,87.5-

115#,K55

COLLAR: FLOAT; 18-5/8 IN.; 87.5-115 LB/FT; K-55; BUTTRESS THREAD BOX UP X

PIN DOWN PER COLLAR FLOAT; CEMENTING TYPE,STYLE PLASTIC SEAT,18-5/8 IN

OD,87.5-106 LB/FT,BUTTRESS BOX & PIN THD,17.5000 IN DRILL ID,API 5B,WITH

PLASTIC VALVE "PDC DRILLABLE"

1000022883

442

Drilling Equipment

(Advanced Well

Completion

Equipment)

PANEL,CONTROL,HYD-


PANEL; CONTROL TYPE,SS AISI 316,NEMA-4X, SCADA COMPATIBLE REMOTELY

OPERATED ELECTRICALLY DRIVEN HYDRAULIC CONTROL UNIT FOR IWC. CAPABLE

OF OPERATING 9 VALVES AND MONITORING PDHMS IN 3 WELLS. POWER

REQUIREMENTS: 110 VAC, 4 KW, SCADA COMMUNICATION PROTOCOL: MODBUS-

485 OR ETHERNET, PRESSURE: 10000 PSI (MAX), TEMPERATURE RATING: 55 DEG

C (SHELTERED), HYDRAULIC TANK CAPACITY: 30 GAL, FLOW CONTROL VALVE:

SCHLUMBERGER TRFC-HN, PUMP FLOW RATE: 1 L/MIN (MAX), FULLY

COMPATIBLE WITH SAUDI ARAMCO I-FIELD REQUIREMENTS (SEE ATTACHED). THE

SURFACE UNIT SHALL BE E WITH DRAIN VENT CONNECTIONS ARAMCO SAES-J-

902. SURFACE UNIT SHALL DISPLAY VIA ELECTRONIC VISUAL DISPL CRYSTAL

DISPLAY (LDC) TO DO LOCALLY

1000824872





9COM/9CAT

443

Drilling Equipment

(Downhole

Equipment)

PDHMS,4-1/2,VTHC,SINGLE

GAUGE,HPHT

ASSEMBLY; SINGLE HIGH PRESSURE HIGH TEMPERATURE (HPHT) PERMANENT

DOWNHOLE MONITORING (PDHM). TYPE,SIZE: 4-1/2 IN. 1- COMPLETE#ASSEMBLY

WITH ITEMS AS DESCRIBED IN KITS SECTION MUST BE BOXED#AS AN INDIVIDUAL

UNIT FOR SHIPMENT AND STORAGE PER SAUDI ARAMCO#PACKAGING SPEC

844418. 2- MANUFACTURER MUST BAR CODE IDENTIFY#EACH ISSUE UNIT ON

BOTH THE MATERIAL AND OUTSIDE THE CONTAINER#(IN WHICH THE ISSUE UNIT

IS CONTAINED). CODE TO BE IN THE#INTERNATIONAL CODE 39 BAR CODING

SYSTEM FORMAT AND ADHERE TO#ANSI MH10.8M (LATEST EDITION)

SPECIFICATION (LESS SECTIONS 12 &#13). BAR CODE TAG MUST INCLUDE THE

SAUDI ARAMCO STOCK NUMBER AND#PURCHASE ORDER NUMBER. ALL ITEMS

SHOULD BE ASSEMBLED TOGETHER#PRIOR TO TESTING. KIT COMPONENTS: ITEM

QTY DESCRIPTIONS 01 01 SINGLE 4.5#SOLID GAUGE CARRIER PORTED TUBING-

SUPER 13 CR,13.5 LB/FT VAM TOP HC CONNECTION PXP, EXTERNALLY TESTABLE

AEMP TO FIT INSIDE 9-5/8#58.4 LB/FT CASING YIELD STRENGTH 95

KPSI,MAXIMUM OD: 5.55#,DRIFT ID : 3.795# DRAWING NUMBER PAD-P245135-

0049 PART NUMBER : P245135-0049 02 01 SINGLE HIGH PRESSURE/HIGH

TEMPERATURE (175 DEG C,20 KPSI) SURESENS 175 GAUGE READING TUBING

PRESSURE AND TEMPERATURE . QUARTZ SENSOR,CONSTRUCTED ENTIRELY OF

NACE MR0175 COMPLIANT MATERIALS. PHYSICAL PROFILE IS

0.75#DIAMETER/GAUGE. UTILIZES EXISTING HYBRID TECHNOLOGY FOR GAUGE

AND TRANSDUCER ELECTRONIC. PRESSURE RESOLUTION :0.0001 PSI

TEMPERATURE RESOLUTION: 0.0001°C.PRESSURE ACCURACY:±0.02%FULL SCALE.

TEMPERATURE ACCURACY :0.15°C. SAMPLING GATE DURATION(S):<0.1 TO

3.2(CONFIGURABLE) PART NUMBER: P1211-1010 03 01 WELLHEAD OUTLET WITH

# 11 GRAYLOC INTERFACE PRESSURE CONNECTION TO TREE. PRESSURE RATING :

10,000 PSI 04 01 TUBING HANGER PENETRATORS(2 PER WELL) TWO OFF INCOLOY

725 3/8# NPT TO 1/4# SWAGELOCK CONNECTION.

1000837756

444

Drilling Equipment

(Downhole

Equipment)

REAMER,TURBOCASER,7",NVAM,

26#,8.250"OD

REAMER; TURBOCASER TYPE,7 IN 26#, N VAM DIA,7 INCH TURBOCASER EXPRESS

TOOL WITH NEW VAM CONNECTION. MAX BODY OD: 7.67 INCH. TOP

CONNECTION: 7 INCH NEW VAM, 26 PPF. TOOL WEIGHT: 706 LB. REAMER BIT OD:

8.25 INCH. OVERALL LENGTH: 11.1 FT. REAMER PERFORMANCE

CHARACTERISTICS: FLOW RANGE: 0 - 500 GPM. MAX TORQUE ON BIT: 720 LB-FT.

MAX POWER OUTPUT: 80 HP. MAX PRESSURE DROP: 836 PSI.

1000888048





9COM/9CAT

445

Drilling Equipment

(Downhole

Equipment)

TUBING,COILED,2-

3/8"TAPERED.156/.204#WT

TUBING; COILED, TAPERED TYPE,2-3/8 IN OD,18000 FT LG,CONTINUOUSLY

MILLED STRING,GR HS-90,THE UNDERBALANCED 2-3/8 IN OD HS90

CONTINUOUSLY MILLED STRING COILED TUBING IS TAPERED AS FOLLOWS: (1)

0.156 IN WALL THICKNESS SECTION (2375-156-9-C): 4,000 FT LONG. (2) 0.175 IN

WALL THICKNESS SECTION (2375-175-9-C): 2,000 FT LONG. (3) 0.190 IN WALL

THICKNESS SECTION (2375-190-9-C): 5,000 FT LONG. (4) 0.204 IN WALL

THICKNESS SECTION (2375-204-9-C): 7,000 FT LONG. THE TOTAL LENGTH IS

18,000 FT. IT WILL BE PROVIDED WITH 7/16 IN OD, 7 CONDUCTORS, ELECTRIC

CABLE (HEPTACABLE). KIT COMPONENTS

1000885164

446

Drilling Equipment

(Advanced Well

Completion

Equipment)

SCREEN,SPIRAL,5-

1/2",VAGT,17#,300MIC,316

SCREEN; LINE SLOT TYPE,SIZE 5.5 INCH,5.50# LINESLOT, 0.012# GAUGE,

300UM/316L, SPIRAL, 17.0LB/FT, VAGT, RANGE 3, L801000919001

447

Drilling Equipment

(Downhole

Equipment)

KIT,FRAC,5-

1/2X8.500"2OH,VTHC,20#,PK

PACKER PRODUCTION; STAGE FRAC SYSTEM, BLANK STAGE ASSEMBLY TYPE,7.750

IN MAX OD,4.700 IN MIN ID,9-5/8 IN OD,43.5 - 58.4 LB/FT,5-1/2 IN CONNECTN,20

LB/FT,VAM TOP HC BOX X PIN, C/W COONECTN,10,000 PSI WORKING PRESSURE

SUPPLY,FOR OPEN HOLE: 8-3/8 IN - 8-1/2 IN, MATERIAL: P-110, PULL STRENGTH

THROUGH TOOL: 514,000 LBS, BURST PRESSURE: 10,750 PSI COLLAPSE PRESSURE:

10,300 PSI, EFFECTIVE SHEAR AREA: 8.500 IN2, SHEAR PRESSURE PER PIN: 341

PSI, MAX SHEAR PRESSURE: 4,092 PSI, MAX NUMBER OF SHEAR PINS: 12 PINS,

OVERALL LENGTH: 69.900 IN, WEIGHT: 322.79 LBS, ELASTOMER MATERIAL: HSN

KITS COMPONENTS:

1000823558

448

Drilling Equipment

(Downhole

Equipment)

HANGER,LINER,7X9-

5/8,THS563,26#,125,HYD

HANGER LINER; HYDRAULIC ACTIVATI,7 IN END 1,26 PPF END 1,9-5/8 IN END 2,40 -

47 PPF END 2,HYDRIL 563 END CONN,7 IN 26 PPF HYDRIL 563,7 IN, 26 PPF X 9-5/8

IN 40-47 PPF CONTROL SET LINER HANGER WITH ZXP LINER TOP PACKER AND

SETTING SLEEVE. KIT COMPONENTS

1000847744

449

Drilling Equipment


Cementing

Equipment)

SHOE,FLOAT,13-3/8",VAM

TOP,72#,HC95

SHOE: FLOAT; 13-3/8 IN. 72 LB; HC95 GRADE, VAM TOP, W/12.25 IN. DRILL OUT

ID SHOE FLOAT; CEMENTING TYPE,FOR CEMENTING TOOL,PLASTIC SEAT,GR

HC95,13-3/8 IN CASING OD,72.0 LB/FT,VAM TOP CONNECTN,WITH PLASTIC

VALVE, 12-1/4 IN DRILL OUT ID "PDC DRILLABLE"

1000624831





9COM/9CAT

450

Drilling Equipment

(Downhole

Equipment)

VALVE,ICV,3-

1/2",NVAM,5K,718,HVC+ACCUPU

L


SUPPLY,3-1/2 9.3# API E.U.E. B X P THD END CONN,INCONEL 718 / 4140

BODY,CASING SIZE: 7 IN. (17-32 #), MAXIMUM OD: 5.855 IN, MINIMUM ID: 2.75

IN, LENGTH: O.A.L. 136.25 IN, 3-1/2 9.3# API EUE 80K MAT'L CONNECTION

TORQUE (FT-LBS):2,400 MIN, 3,200 OPT., 4,000 MAX, HVC CONNECTION: 3-1/2

10.2# NS-CT B X P THD, 3-1/2 10.2# NS-CT 80K MAT'L CONNECTION TORQUE, (FT-

LBS): 2,530 MIN., 2,890 OPT., 3,250 MAX, SERVICE: STD/H²S/CO², MAX WORKING

TEMP.,275°F, WORKING PRESSURE INTERNAL: 7,500 PSI, WORKING PRESSURE

EXTERNAL: 7,500 PSI, TEST PRESSURE INTERNAL: 8,000 PSI, TEST PRESSURE

EXTERNAL: 8,000 PSI, MAX. HYDRAULIC PRESSURE: 10,000 PSI, WORKING

HYDRAULIC PRESSURE: 7,500 PSI, MAX. DIFF UNLOADING PRESSURE: 5,000 PSI,

HVC CHOKE: 214HVC350022, ACCUPULSE: 213AP1350004, HVC METALLURGY:

718 INC. / 4140, FITTING KIT METALLURGY: 4140 (80K YIELD), ACCUPULSE

METALLURGY: 9CR, FASTENER METALLURGY: 300 SS, TYPE OF SEALS: NON-

ELASTOMERS AND ELASTOMERS, ELASTOMERS F/HYD. CHAMBER: CHEMRAZ,

ELASTOMERS F/ WELLBORE FLUID: VITON, PISTON AREA: 2.075 SQ. IN, TOTAL

STROKE: 6.00 IN, HYD CHAMBER DISPLACEMENT: 12.45 CU. IN, TENSILE RATING:

202,220 LBF, COMPRESSIVE RATING: 200,000 LBF, MIN. INTERNAL FLOW AREA:

5.94 SQ.IN, FLOW AREA BETWEEN OD OF HVC AND ID OF CSG 7 IN. (17#) (6.538

ID): 9.23 SQ IN TOTAL(2.58 SQ. IN. OF TOTAL IS DUE SLOT), FLOW TRIM CHOKE

SETTINGS: 11 POSITIONS (1 X FULLY OPEN, 1 X FULLY CLOSED, 9 X FIXED) 0%,

2.38%, 3.57%, 5.90%, 9.43%, 14.09% 18.75%, 23.41%, 43.63%, 84.06%, 100%,

COIL TUBING SHIFTING TOOL: 290HM0275000, ASSY PICTORAL/ BOM DRAWING:

312557-03-01, TECH DOC: 312025-00-01.

1000780058





9COM/9CAT

451

Drilling Equipment

(Advanced Well

Completion

Equipment)

PANEL,CONTROL,HYD-


PANEL; CONTROL, AUTOMATED MULTI-VALVE, 4 VALVE, 1 WELL TYPE,SIZE 56.13

IN HT X 57 IN WD X 40 IN DP,SS AISI 316,ENCLOSURE: NEMA 4X (XPIO) / (IP 56),

POWER REQUIREMENTS: 110/220 V, 60 HZ, WORKING PRESSURE: 6000 PSI WITH

SURFACE DATA LOGGER, NUMBER OF WELLS: 1 (MAX), MAXIMUM NUMBER OF

VALVES: 4 DOWNHOLE CONTROL VALVES, MAXIMUM NUMBER OF DOWNHOLE

GAUGES: 4, WORKING TEMPERATURE: 65 DEG C UNDER SHELTER, AS PER

ARAMCO I - FIELD REQUIREMENTS FOR THE SURFACE DATA LOGGER AND

ATTACHMENT A. SURFACE DATA LOGGER TECHNICAL DESCRIPTION, MAXIMUM

NUMBER OF DOWNHOLE GAUGES: 4, POWER SUPPLY OPTIONS: AC/DC, POWER

CONSUMPTION: 14 W + 1 PER DOWNHOLE GAUGE, MEMORY CAPACITY: 4 MB ON

ONBOARD AND 2 GB COMPACT FLASH, COMMUNICATION PORTS: RS-232, RS-485

AND ETHERNET PORT.

1000827654

452

Drilling Equipment


Cementing

Equipment)

DV TOOL,18-5/8",BTC,87.5-

94.5#,L80,MEC,4

TOOL; CEMENTING TYPE,SIZE 18-5/8 IN,W/FREE-FALL PLUG SET, MODEL 781P4

L80, 87.5-94.50 LB/FT, A5 ELEMENT, INFLATABLE PACKOFF TWO STAGE, CASING

SIZE: 18-5/8 CASING WEIGHT RANGE: 87.5-94.5 LB/FT, CASING GRADE: L-80,

THREADS: BUTTRESS (BTC), ELEMENT MATERIAL: A5, PDC DRILLABLE: YES, O.D

(MAXIMUM): 21.625 IN, PACKER ELEMENT O.D: 20.50 IN, DRILL OUT I.D: 17.659

IN, DRIFT: 17.567 IN, LENGTH OVERALL: 11.8 FT, PACKER ELEMENT LENGTH: 4FT,

OPENING SEAT I.D: 15.500 IN,CLOSING SEAT I.D: 15.125 IN, OPENING PRESSURE

(INNER SLEEVE MOVES TO INFLATE PACKER): 200-500 PSI, PACKER SETTING

PRESSURE (EXTERNAL SLEEVE OPENING), PRESSURE: 400-800 PSI, 8 SCREWS AT

175 PSI SCREW, STAGE TOOL SEALS: FLUOROCARBON O-RING SEALS, CEMENTING

PORTS: SIX 1-1/8 DIA.PORTS, INTERNAL PRESSURE: 2,930 PSI, MAXIMUM

EXTERNAL PRESSURE: 780 PSI, SAFE LOAD BELOW TOOL: 1,312,000 LBS. (S.F. 1.5),

MAXIMUM TEMPERATURE: 250 DEG. F.

1000839640





9COM/9CAT

453

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X3-

1/2,NVAM,9.2#,13CR,FTHRU

PACKER PRODUCTION; RETRIEVABLE, PREMIER FEED-THROUGH TYPE,HYDRAULIC

SET ACTIVATI,5.980 IN OD OD,2.945 IN ID NOM. ID,7 IN OD,26-29 LB/FT,3-1/2 IN

CONNECTN,9.2 PPF,NEW VAM BOX X PIN COONECTN,7500 PSI SUPPLY,ISO-

SPEC.14310,WITH 7 EA. X 1/4 IN CONTROL LINE PORTS, MATERIALS: 13%

CHROME, 80 KSI MYS, ELASTOMERS: NITRILE PE, TEMP. RATING: 65-350°F MAX.

THE PACKER SHOULD BE THREADED DIRECTLY PRODUCTION STRING AND SET IN

ONE TRIP BY PRESSING UP AGAINST A PLUGGING DEVICE BELOW THE PACKER.

REMOVAL ON THE PRODUCTION STRING IS ACCOMPLISHED BY USE OF A THRU-

TUBING SHIFT TOOL OR THRU-TUBING CUTTER. THIS MUST BE SUITED FOR

MULTIZONE STACKED PACKER, INTELLIGENT/SMART WELL COMPLETIONS. KIT

COMPONENTS DESCRIPTION ITEM QTY SUB: HYDRAULIC 01 01 SPLICE FOR TOP

AND BOTTOM PF THE PACKER. SIZE: 3-1/2 IN. THREAD: 3-1/2 IN. 9.2 PPF AM NEW

VAM BOX X PIN, TOOL OD: 6.00 IN. TOOL ID: 2.953 IN. LENGTH: 43 IN. MATERIAL:

4140 LOW ALLOY, 80 KSI MYS THIS 3-1/2" SPLICE SUB IS TO ACCOMMODA 5X1/4"

& 1X1/4" ELECTRICAL SPLICE CONNECTIONS PART NO.: H781273508 KIT

COMPPNENTS: ITEM QTY DESCRIPTION 01 01 SUB: HYDRAULIC SPLICE FOR TOP

AND BOTTOM PF THE PACKER.SIZE: 3-1/2 IN. THREAD: 3-1/2 IN. 9.2 PPF AM NEW

VAM BOX X PIN, AM NEW VAM BOX X PIN, TOOL OD: 6.00 IN. LENGTH: 43

IN.MATERIAL: 4140 LOW ALLOY 80 KSI MYS THIS 3-1/2" SPLICE SUB IS TO

ACCOMMODA SPLICE SUB IS TO ACCOMMODA 5X1/4" <(>&<)> 1X1/4"

ELECTRICAL SPLICE CONNECTIONS PART NO.: H781273508

1000781980





9COM/9CAT

454

Drilling Equipment

(Downhole

Equipment)

PACKER,ACP,24",BW,176#,4FT

PACKER; 24.00 IN SLIMLINE CLEARANCE ACP W/4 FT ELEMENT, NOMINAL CASING

ID: 22.50, CASING THREADS: ANSI BUTTRESS PIN UP X BLANK PIN DOWN, ACP

OD:25.90 IN, ACP LENGTH :125.0 IN, BURST RATING ON CASING :(API SPEC)3,060

PSI, VALVE BODY MATERIAL 1026 (55,000 PSI YIELD STRENGTH), VALVE BODY

BURST AFTER INFLATION SEQUENCE IS COMPLETED AND THE CLOSING VALVE

HAS CLOSED, ULTIMATE BURST 3,300 PSI, RECOMMENDED MAXIMUM WORKING

PRESSURE 80% OF BURST OF CASING 2,450 PSI, TENSILE YIELD OF THE ACP-

2,450,000 LBF, COLLAPSE RATING OF THE ACP -1,450 PSI, DIFFERENTIAL RATING

OF ACP IN 28.50 IN ID-1500 PSI, MECHANICAL STAGE TOOL, CASING SIZE : 24 IN,

CASING WEIGHT RANGE :176.00 LB/FT (PE), CASING GRADE: X-56, THREADS

:BUTTWELD (PREPPED FOR WELD ON CONNECTION SUCH AS VETCO RL-4S ),

O.D.(MAXIMUM): 25.125 IN, DRILL OUT I.D.: 22.250 IN, LENGTH OVERALL: 44.5 IN

(APPROXIMATE), OPENING SEAT I.D.: 17.250, CLOSING SEAT I.D.: 19.960,

OPENING PRESSURE: 400-600 PSI, CLOSING PRESSURE: 800-PSI, STAGE TOOL

SEALS: STRILE O-RING SEALS, CEMENTING PORTS: SIX 1-1/8 DIA.PORTS,

MAXIMUM INTERNAL PRESSURE : 217 PSI, MAXIMUM EXTERNAL PRESSURE :1083

PSI, SAFE LOAD BELOW TOOL: 1361000 LBS.(S.F1.5), MAXIMUM TEMPERATURE

:275 DEG F, ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING KIT

COMPONENTS

1000820392

455

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,5-

1/2X8.50"OH,NVAM,17#,L80

PACKER PRODUCTION; OH SWELL PACKER TYPE,8.000 IN OD,4.892 IN ID,8-1/2 IN

OPEN HOLE OD,5-1/2 IN CONNECTN,17.0 PPF,NEW VAM BOX X PIN COONECTN,5-

1/2 IN SWELL REPACKER, BASE PIPE MATERIAL: L-80 STEEL, SEAL MATERIAL: OIL

SWELL ELEMENT, SEAL LENGTH: 20 FT, JOINT LENGTH: 30 FT.

1000845069

456

Drilling Equipment

(Downhole

Equipment)

TUBING,COILED,2-

3/8",TAPERED.134/.204"WT

TUBING; COILED, STRING, TAPERED HS-90 TYPE,2-3/8 IN OD,18,000 FT LG,GR HS-

90,CONTINUOUSLY MILLED STRINGS OD ARE TAPERED ASFOLLOW: 0.134 IN WALL

THICKNESS SECTION -3,500FT(2375-134-9-C) 0.145 IN WALL THICKNESS SECTION -

2,000FT(2375-145-9-C), 0.156 IN WALL THICKNESS SECTION -2,000FT(2375-156-9-

C), 0.175 IN WALL THICKNESS SECTION -2,000FT(2375-175-9-C), 0.190 IN WALL

THICKNESS SECTION -5,000FT(2375-190-9-C), 0.204 IN WALL THICKNESS SECTION -

3,500FT(2375-204-9-C), WITH 7/16 IN OD 7-CONDUCTORS ELECTRIC CABLE

(HEPTACABLE) INSTALLED EXTRA LENGTH FOR SLACK

1000823039

457

Drilling Equipment

(Downhole

Equipment)

LAUNCHER,5-

1/2X7,XPC,18.24#,COMPACT,SES

LAUNCHER; COMPACT TYPE,SIZE 5-1/2 IN 18.24 IB/FT X 7 IN 26 LB/FT,SOLID

EXPANDABLE TUBULAR (SET), COUPLED WITH CONNECTION SLEEVE, MATERIAL:

EX-80, CONNECTION: ENVENTURE PROPRIETARY XPC PIN UP LENGTH: 6 FT1000819335





9COM/9CAT

458

Drilling Equipment

(Downhole

Equipment)

PACKER,TIEBACK,5",NVAM,18#

PACKER, LINER: LINER, TOP ISOLATION PACKER, TYPE JMZX 5 IN 18 LB/FT NEW

VAM PIN,TOOL OD 5.819 IN X TOOL ID 4.276 X PACKER LINER; LINER, TOP

ISOLATION PACKER, TYPE JMZX 5 IN 18 LB/FT NEW VAM PIN,TOOL OD 5.819 IN X

TOOL ID 4.276 X SEAL OD 5.250 IN

1000024966

459

Drilling Equipment

(Downhole

Equipment)

VALVE,ISOL,7",NVAM,174PH,4.9

90"ID

VALVE; LARGE BORE FLAPPER TYPE,SIZE 9-5/8 IN,ID: 4.990 IN, OD: 8.237 IN,

OVERALL LENGTH: 23 IN, LOWER THREAD: 7 IN NEW VAM PIN, UPPER THREAD: 7

IN NEW VAM BOX, ACTIVE FLOW WETTED MATERIAL: 17-4 PH, ALL ITEMS

SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING

1000815456

460

Drilling Equipment

(Downhole

Equipment)

COLLAR,SETTING,7",NK3SB,29#,4

1XX,TBR12FT

COLLAR: SETTING; W/TYPE LG-12 TBR AND RPOB PROFILE F/7 IN GEN-2 LINER

HANGER; IN VERTICAL KHUFF GAS WELLS COLLAR TIE BACK; 7 IN OD,6.184 IN

MIN. I.D. ID,NK-3SB PIN DOWN END CONN,NACE MR-01-75,FOR 7 IN

GENERATION-2 KHUFF LINER HANGER SYSTEMS IN VERTICAL WELLS. KITS

COMPONENTS

1000024083

461

Drilling Equipment

(Downhole

Equipment)

KIT,PACKER,LINER,7X3-

1/2",EUE,F/SCREEN

PACKER LINER; 'QUANTUM' NON-CEMENTED KIT TYPE,4140 L-80,FOR SCREEN

HANGING SYSTEM,6.083 IN OD,7.00 IN OD,23-26 LB/FT,4.937 - 6 IN-8 STUB ACME

PIN DOWN CONNECTN,MR0175/ISO 15156,6,000 PSI RATING ELEMENT, USED ON

7 INCH CASING, 1. COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN KITS

SECTION MUST BE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE

PER SAUDI ARAMCO PACKAGING SPEC 844418. 2. MANUFACTURER MUST BAR

CODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDE THE

CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO BE IN THE


MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12 & 13). BAR CODE


NUMBER. ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING. KITS

COMPONENTS

1000807103

462

Drilling Equipment

(Downhole

Equipment)

PACKER,SWELL,4-

1/2X5.60"',NVAM,12.6#,L80

PACKER PRODUCTION; SWELL TYPE,FOR OIL,4.5 IN OD,3.958 IN ID,12.6 PPF,NEW

VAM COONECTN,SWELLPACKER, 4.5 IN X 5.6 IN X 3 M, BASEPIPE OD: 4.5 IN,

BASEPIPE WEIGHT: 12.6 PPF, BASE MATERIAL: L80, THREAD TYPE: NEW VAM, END

RING MATERIAL: ST52, PACKER ELEMENT OD: 5.6 IN, PACKER ELEMENT LENGTH:

118.1 IN, TOTAL PACKER LENGTH: 236.2 IN, PACKER DRIFT ID: 3.833 IN, PACKER

NOMINAL ID: 3.958 IN, MINIMUM HANDLING SPACE BOX END: 50 IN, MINIMUM

HANDLING SPACE PIN END: 50 IN, COUPLING LENGTH: 9.921 IN, COUPLING OD:

4.892 IN, ENDRING LENGTH: 2.2 IN, ENDRING OD: 5.58 IN, MAX H2S LEVEL STD.

POLYMER: 0.5 %, HOLE SIZE: 6.125 IN

1000769329





9COM/9CAT

463

Drilling Equipment

(Downhole

Equipment)

PIPE,5-

1/2,VETW,17#,VM50,30FT,EXPA

ND,SES

HANGER LINER; MECHANICAL ACTIVATI,FOR STD,5-1/2 IN X 7 IN METALSKIN

CASING STRING : OUTSIDE DIAMETER: 7.00 IN, WEIGHT ¿OPEN -HOLE LINER,

(LB/FT): SEE CHART BELOW, EXPANDABLE BASE PIPE : GRADE: ANY, CONNECTION

OUTSIDE DIAMETER: 5.500 IN, SEALABILITY : METAL TO WALL THICKNESS: 0.304

IN INSIDE DIAMETER: 4.892 IN, METAL, PREVIOUS CASING DRIFT DIAMETER:

4.767 IN, STRING OTSIDE DIAMETER: 7.00 IN, WEIGHT (LB/FT): WEIGHT : 17.0

LB/FT, GRADE: SEE CHART, GRADE: ANY VM50, SEAMLESS TUBING : YES,

CONNECTION TYPE: VAM ET WISE, CONNECTION PROTECTIVE SLEEVE: YES,

PROTECTIVE SLEEVE OD: 5.703 IN, CONE HOUSING RUNNING DIA (IN): 23 LB-29

LB/6.00, CONE HOUSING RUNNING DIA (IN): 32LB/5.850, WELL PARAMTERS :

MINIMUM OPEN HOLE SIZE: 7.00 IN, MAXIMUM HOLE ANGLE(DEG): ANY

INCLINATION, MAXIMUM DOGLEG SEVERITY EXPANDED SECTION: 12 DEG/100 FT,

SOUR SERVICE : WELL-SPECIFIC, CONNECTION SEALABILITY :METAL-TO-METAL,

PREVIOUS

1000831473

464

Drilling Equipment

(Downhole

Equipment)

COLLAR,SETTING,4-

1/2,NK3SB,13.5#,TBR12FT

COLLAR: SETTING, TYPE LG-12, & TBR, RP- RRP-RPOB PROFILE F/4-1/2 IN GEN-2

KHUFF LINER HANGER IN HORIZONTAL GAS WELLS COLLAR TIE BACK; 4-1/2 IN

OD,NK-3SB END CONN,NACE MR-01-75,FOR 4.5 IN. GENERATION-2, KHUFF LINER

HANGER SYSTEMS IN HORIZONTAL KHUFF GAS WELLS KITS COMPONENTS

1000024132

465

Drilling Equipment

(Downhole

Equipment)

LAUNCHER,16X18-

5/8",XPC,EX80,COMPACT,SES

LAUNCHER; COMPACT TYPE,SIZE 16 IN,16 IN X 18-5/8 IN, 115 PPF, 17 IN OD,

COMPLETE WITH CONNECTION SLEEVE, EX-80 MATERIAL, XPC PIN UP

CONNECTION

1000886902

466

Drilling Equipment

(Downhole

Equipment)

PBR/SEAL,4-

1/2",NK3SB,13.5#,41XX110,24FT

RECEPTACLE: POLISHED BORE, TO RUN WITH 4-1/2" GEN-2 'SN-AT-12' PACKER

RECEPTACLE; PBR TYPE,SIZE 5.813" OD X 5.250" ID X 24',41XX-SOUR SERVICE-

110,000 PSI MIN YIELD (P-110),NACE MR-01-75-97,TO BE RUN WITH 4-1/2" "GEN-

2 'SN-AT-12' PACKER KITS COMPONENTS

1000609482

467

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,7",SPIRAGLIDER,8.

125"OD,SC

CENTRALIZER: CASING; 7 IN. OD; SLIP-ON, SEMI-RIGID, SPIRAGLIDER .

CENTRALIZER CASING; SLIP-ON, SEMI-RIGID, SPIRAGLIDER TYPE,9-5/8 IN 36-53.5

LB/FT OR 8-3/8 IN MIN ID. OPEN HOLE CASING,7 IN NON-UPSET OD,8-1/4 IN MAX

BOW OD,STYLE 6-BLADE, SPIRAL,36-53.5 LB/FT,NRA,USE WITH STOP COLLARS

1000022719

468

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,9-

5/8",SPIRAGLIDER,11.75"SC

CENTRALIZER: CASING; 9-5/8 IN. OD; SLIP-ON, SEMI-RIGID, SPIRAGLIDER .

CENTRALIZER CASING; SLIP-ON, SEMI-RIGID, SPIRAGLIDER TYPE,13-3/8 IN, 54.5-86

LB/FT OR 12 IN MIN ID OPEN HOLE CASING,9-5/8 IN NON-UPSET OD,11-3/4 IN

MAX BOW OD,STYLE 8-BLADE, SPIRAL,54.5-86 LB/FT,USE WITH STOP COLLARS,

8444-18

1000022752





9COM/9CAT

469

Drilling Equipment


Cementing

Equipment)

CENTRALIZER,9-

5/8",RIGID,HINGED,12.125"

CENTRALIZER: CASING; FOR 9-5/8 IN. OD CASING TO FIT INSIDE 13-3/8 IN., 61 TO

72 LB/FT CASING; CENTRALIZER CASING; POSITIVE TYPE,13-3/8 IN CASING,9-5/8

IN OD,12.1250 IN BOW OD,STYLE NON-WELDED HINGE WITH PREFORMED RIGID

BOWS,61.0-72.0 LB/FT,TYPE "PO-V", WITHOUT HINGE PINS

1000022710

470

Drilling Equipment

(Downhole

Equipment)


1/2,NVAM,12.6#,RET

PACKER PRODUCTION; PREMIER RETRIEVABLE TYPE,FOR H2S,WIRELINE OR

HYDRAULIC SER ACTIVATI,8.540 IN OD,3.875 IN ID,9-5/8 IN OD,40-47 LB/FT,4-1/2

IN CONNECTN,12.6 LB/FT,4-1/2 IN, 12.6 PPF NEW VAM PIN X PIN

COONECTN,5,000 PSI SUPPLY,BMS A099 LOW ALLOY CARBON STEEL, 8C 18-22RC

MATERIAL, WITH HNBR PACKING ELEMENT, NITRILE O-RINGS WITH TEFLON BACK-

UPS, SET WORKING PRESSURE: 4000 & 7500 PSI, TEMPERATURE RATING: 100-350

DEG F. KITS COMPONENTS

1000764263

471

Drilling Equipment

(Downhole

Equipment)

MILL,PATHMAKER,8.375",WINDO

W/FORMATION

MANDREL; SIZE 8.375 IN,PATHMAKER WINDOW FORMATION MILL1000839813

472

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,NVAM,12.6#,ALLOY

PACKER PRODUCTION; VHR SINGLE TRIP TYPE,FOR H2S,8.460 IN OD,3.880 IN ID,9-

5/8 IN OD,40-47 LB/FT,5-1/2-6ACLH X 4-1/2 IN, 12.6 PPF NVAM CONNECTN,12.6

LB/FT (BOTTOM),BOX-PIN COONECTN,PLUGGED: 5,000 PSI ABOVE, 5,000 PSI

BELOW, UNPLUGGED WITH 4-1/2 IN TUBING :6,000 PSI ABOVE, 5,000 PSI BELOW

SUPPLY,NACE MR0175,ALLOY, 80,000 PSI YIELD STRENGTH 5.250-6 RTH LTH LH,

BURST PRESSURE: 8,430 PSI, COLLAPSE PRESSURE: 7,500 PSI, TENSILE STRENGTH:

288,000 LBS, SETTING PRESSURE: MINIMUM:2,000 PSI, MAXIMUM: 5,000 PSI,

TEST PRESSURE: 300 PSI KIT COMPONENTS

1000765770

473

Drilling Equipment

(Advanced Well

Completion

Equipment)

VALVE,ICV,3-

1/2",EUE,9.3#,CRA,ODIN

VALVE; ODIN FLOW CONTROL VALVE TYPE,SIZE 3-1/2 INCH,9.3 PPF EUE BOX X PIN

END CONN, TUNGSTEN CARBIDE TRIM,3-1/2 INCH ODIN FLOW CONTROL VALVE

9.3 PPF EUE BOX X PIN END CONN 9CR-1MO/4140,INC718, TUNGSTEN CARBIDE

TRIM, EXTERNAL WORKING PRESSURE 6500 PSI, INTERNAL DIA.:2.812 IN MIN

LENGTH: 136 IN, MAX FLOW RATE: 40000 BBL/DAY, MAX WORKING TEMP.:

325DEGF MIN WORKING TEMP.: 40DEGF, MAJOR OD: 5.850 IN, SEAL BORE SIZE:

2.812 IN, NO.#OF BYPASS CONTROL LINES:4. THE TUBING RETRIEVABLE FLOW

CONTROLLER PROVIDE REMOTELY ACTUATED DOWNHOLE CONTROL OF FLOW

FROM THE RESERVOIR. THE SYSTEM IS OPERATED BY TWO 0.25-IN HYDRAULIC

CONTROL LINE THAT IS ROUTED FROM THE SURFACE CONTROLS TO THE CHOKE

SECTION OF THE TOOL. MAX DIFFERENTIAL OPENING PRESSURE:3000 PSI AND

INTEGRAL#SHIFTING PROFILE FOR MECHANICAL OVERRIDE CONTINGENCY.

1000904428





9COM/9CAT

474

Drilling Equipment


Cementing

Equipment)

COLLAR,FLOAT,24",JVLW,176#,IS

C

COLLAR FLOAT; CEMENTING TYPE,STYLE SS3 VALVE, ALUM. RECEPTACLE,24 IN

OD,176.0 LB/FT,JV-LW BOX UP X PIN DOWN,22.2450 IN DRILL ID,API 5B,WITH SS3

VALVE AND ISC PROFILE AND 5.5 IN X 5 IN DRILL PIPE DISPLACEMENT DART, "PDC

DRILLABLE"

1000736660

475

Drilling Equipment

(Downhole

Equipment)

PACKER,PROD,7X4-

1/2,VAM,12.6#,ALLOY

PACKER, PRODUCTION: RETRIEVABLE, H2S, HYDRAULIC SET, 6.000 IN OD, 3.880 IN

ID, 7.00 IN CASING OD, 26-29 LB/FT, PACKER PRODUCTION; RETRIEVABLE

TYPE,FOR H2S,HYDRAULIC SET ACTIVATI,6.000 IN OD,3.880 IN ID,7.00 IN OD,26-

29 LB/FT,4-1/2 IN (BOTTOM THREAD) CONNECTN,12.6 LB/FT,VAM - NEW PIN

COONECTN,6000 PSI SUPPLY,MATERIAL: ALLOY, LENGTH: 83.68 IN,

TEMPERATURE: 325 DEG F, UPPER SEAL BORE ID: 5.00 IN MIN., TYPE LATCH:

5.250-6 RTH LTH, WITH A HYDRAULIC SETTING TOOL PART NO. 12VRR38812-E

KITS COMPONENTS: ITEM 01,QTY 01, DESCRIPTION PACKER: PRODUCTION, 'VSR',

CASING SIZE:7" 26-29 LB/FT, 6.00" MAX OD, 3.88" MIN ID, 83.68" LG, 5.00" MIN

SEAL SEAL BORE ID, H2S SERVICE, ALLOY MATERIAL, 4-½"-12.6 VAM-NEW PIN

BOTTOM THREAD, 5.250-6RTH LTH LATCH TYPE, W/ AFLAS ELEMENTS WITH

BRASS BACK-UP SHOES. RATINGS: PRESSURE (UNPLUGGED): 6,0000 PSI TENSILE

STRENGTH (CALC):170,400 LBS MATERIAL NO.: 145034 ITEM 02,

QTY01,DESCRIPTION RECEPTACLE: POLISHED BORE (PBR), W/ SEAL ASSEMBLY, 7 X

5.00", 4-1/2" VAM-NEW, 15 FT, VTR, 3.85" MIN ID, 5.875" MAX OD,5.00" SEAL

BORE ID,279.5" LENGTH, PBR-ALLOY/PSA 9CR-1MO, 5-1/2-6 ACME BOX PBR TOP

THREAD, 4-1/2"-12.6 VAM-NEW BOX TOP THREAD, 4-1/2-13.5 VAM-NEW PIN

BOTTOM THREAD, SEAL MATERIAL: VTR, TEMPERTURE: 40-350 DEG F, PRESSURE

RATING: 7,500 PSI, CALCULATED TENSILE STRENGTH: 288,000 LBS, STROKE: 180"

UP. PBR RETRIEVING TOOL: NO. 212L7276 SEAL ASSEMBLY: NO. 144866 PB

RECEPTACLE: NO. 145284 MATERIAL NO. 144679 ITEM 03, QTY01,DESCRIPTION

RATCH LATCH ASSEMBLY: 5.250-6 LH TYPE, 5.29" MAX OD, 3.938" MIN ID, 5.076"

SEAL OD, 5.00" MATING SEAL BORE ID, 40.25" LG, , 4-1/2"-12.6 VAM-NEW BOX,

MATERIAL: ALLOY 80MY-22RC MAX, SEAL MATERIAL: VTR, TEMPERATURE: 40-350

DEG F, SERVICE: H2S, PRESSURE RATING: 7,500 PSI, CALCULATED TENSILE

STRENGTH: 207,400 LBS, DEBRIS SHROUD: TEFLON. MATING PACKER: NO. 812

VSR 71138-V (145034) MATERIAL NO. 144678.

1000669725





9COM/9CAT

476

Drilling Equipment


Cementing

Equipment)

COLLAR,STOP,4-

1/2",SLIPON,2.00",DHP

COLLAR CASING STOP; SLIP-ON, SPIR-O-LOK, 4-1/2 IN TYPE,FOR POSITIONING

CENTRALIZERS,INTERNAL DIA.: 4.625 INCH, OUTSIDE DIA.: 5.25 INCH, LENGTH: 2

INCH, NO. OF SCREWS: 8 EACH, SIZE OF SCREW: 1/2 INCH DIA., MATERIAL: CAST

DUCTILE IRON, FOR 4-1/2" X 6" SPIR-O-LIZER CENTRALIZER,

1000803585

477

Drilling Equipment

(Gas Wellhead

Equipment)

SPOOL ASSY: TUBING; PSL 3-4

SPOOL TUBING WELLHEAD; CARBON,FOR H2S, CO2, AMINE,API RING

JOINTFLANGE TOP CONN,API RING JOINT FLANGE BTM,API RING JOINT

STUDDEDOUTLET,API 6A,NACE MR0175,PSL 3 AND 4,MR EE,PR 2 (APPENDIX

F),TRU (SUITABLE FOR 300 DEG F MAX),API MONOGRAMMED

6000003757

478

Drilling Equipment

(Wellhead Production

Trees)

TREE: POWER WATER INJECTIONTREE; POWER WATER INJECTION TYPE,CARBON,45-SAMSS-005,API-6A

API6D,NACE MR0175 6000003781

479

Drilling Equipment

(Wellhead Production

Trees)

TREE: PRODUCTION; KHF; 10M-

15M

TREE PRODUCTION; KHUFF TREE TYPE,HH,FOR H2S, CO2, AMINE,10M-15MPSI

BODY,10M-15M PSI FLG,45-SAMSS-005,API-6A NACE MR0175,PSL 3(PSL 4 GAS

TEST),MR HH,PR 2 (APPENDIX F),TR U (SUITABLE FOR 300DEG F MAX),API 6A

MONOGRAMMED

6000003773

480

Drilling Equipment

(Oil Wellhead

Equipment)

VALVE: GATE; MANUAL; WLHD; 2-

5M

VALVE GATE WELLHEAD; MANUAL OPERATED,CARBON,FOR H2S,C02,AMINE,PR 2-

5M PSI,API RING JOINT FLANGE ENDCONN,45-SAMSS-005,API-6A NACE

MR0175,PSL 2,MR EE,PR 2 (APPENDIXF),TR U,API 6A MONOGRAMMED6000003785

481

Drilling Equipment

(Gas Wellhead

Equipment)

BONNET: TUBING; KHF;

W/LMMV; 10-15M

BONNET TUBING WELLHEAD KHUFF; CARBON (WITH CLAD WETTED

SURFACES),FOR H2S, CO2, AMINE,10-15M PSI TOP,API RING JOINT FLANGE TOP

CONN,10-15M PSI BOTTOM,API RING JOINT STUDDED BTM,45-SAMSS-005,API-6A

NACE MR0175,PSL 4,MR HH,PR 2 (APPENDIX F),TR U (SUITABLE FOR 300 DEG F

MAX), HAS BUILT IN SPLIT GATE LMMV API 6A MONOGRAMMED

6000003641

482

Drilling Equipment

(Gas Wellhead

Equipment)

BONNET: TUBING; KHF; 10-15M

BONNET TUBING WELLHEAD KHUFF; FOR H2S, CO2, AMINE,10-15M PSI TOP,API

RING JOINT STUDDED TOP CONN,10-15M PSI BOTTOM,API RING JOINT STUDDED

BTM,API-6A,NACE MR0175 45-SAMSS-005,PSL 4,PR 2 (APPENDIX F),TR U

(SUITABLE FOR 300 DEG F MAX), BONNET ONLY, NO BUILT IN LMMV API

MONOGRAMMED

6000003637

483

Drilling Equipment

(Gas Wellhead

Equipment)

SPOOL ASSY: CASING

SPOOL CASING; CARBON,FOR H2S, CO2, AMINE,API RING JOINT FLANGE TOP

CONN,API RING JOINT FLANGE BTM,API RING JOINT STUDDED OUTLET,45-SAMSS-

005,API-6A NACE MR0175,PSL 2,MR DD,PR 2 (APPENDIX F),TR U,API 6A

MONOGRAMMED

6000003749

484

Drilling Equipment

(Oil Wellhead

Equipment)

COMPLETION ASSY: TUBING;

WLHD; 2-5M

COMPLETION ASSEMBLY TUBING; WELLHEAD, OIL TYPE,PR API 2 - 5MPSI,FOR

H2S, CO2 AND AMINE,PSL 2,MR DD,PR 2 (APPENDIX F),TRU,API-6A,NACE MR0175

45-SAMSS-005,TO BE API MONOGRAMMED

6000003659





9COM/9CAT

485

Drilling Equipment

(Oil Wellhead

Equipment)

SPOOL ASSY: TUBING; 2-5M

SPOOL TUBING WELLHEAD; CARBON,FOR H2S, CO2, AMINE,2-5M PSITOP,API

RING JOINT FLANGE TOP CONN,2-5M PSI BOTTOM,API RINGJOINT FLANGE

BTM,45-SAMSS-005,API-6A NACE MR0175,PSL 2,MR DD,PR2 (APPENDIX F),TR

U,API 6A MONOGRAMMED

6000003755

486

Drilling Equipment

(Gas Wellhead

Equipment)

HANGER; ASSY: TUBING; 10M-

15M

HANGER TUBING WELLHEAD; UNS 7718,FOR H2S, CO2, AMINE,PR 10M-15M

PSI,API-6A,NACE MR0175 45-SAMSS-005,PSL 4,MR HH,PR 2 (APPENDIX F),TR U

(SUITABLE FOR 300 DEG F MAX),API MONOGRAMMED

6000003709

487

Drilling Equipment

(Gas Wellhead

Equipment)

SPOOL ASSY: CASING HEADSPOOL CASING HEAD; CARBON,FOR H2S, CO2, AMINE,API RING JOINTFLANGE

TOP CONN,45-SAMSS-005,API-6A NACE MR0175,PSL 2,MR DD,PR 2(APPENDIX

F),TR U,API 6A MONOGRAMMED

6000003745

488

Drilling Equipment

(Gas Wellhead

Equipment)

VALVE: GATE; HYD; SSV; WHLD;

10M-15M

VALVE GATE WELLHEAD; HYD ACTUATED FAIL-SAFE OPERATED,FOR H2S, CO2,

AMINE,PR 10M-15M PSI,API RING JOINT FLANGE END CONN,API 6A,NACE MR-01-

75,PSL 3 (PSL 4 GAS TEST),MR HH,PR 2 9APPENDIX F),TR U (SUITABLE FOR 300

DEG F MAX),API MONOGRAMMED

6000003799

489

Drilling Equipment

(Wellhead Equipment

Spares)

VALVE: GATE; MAN; WLHD; 10M-

15M

VALVE GATE WELLHEAD; MANUAL OPERATED,FOR H2S, CO2, AMINE,PR 10M-

15M PSI,API RING JOINT FLANGE END CONN,API 6A,NACE MR-01-75,PSL 3 (PSL 4

GAS TEST),MR HH,PR 2 (APPENDIX F),TR U (SUITABLE FOR 300 DEG F MAX),API

MONOGRAMMED

6000003787

490

Drilling Equipment

(Gas Wellhead

Equipment)

VALVE: BACKPRESSURE; & TWCV;

WLHD

VALVE BACKPRESSURE WELLHEAD; FOR HS2, CO2, AMINE,UNS 7718BODY,45-

SAMSS-005,NACE MR0175 6000003789

491

Drilling Equipment

(Oil Wellhead

Equipment)

HANGER ASSY: TUBING; 2-5MHANGER TUBING WELLHEAD NON-KHUFF; CARBON,FOR H2S, CO2, AMINE,PR2-

5M PSI,API-6A,NACE MR0175,PSL 2,MR DD,PR 2 (APPENDIX F),TRU,API

MONOGRAMMED

6000003707

492

Drilling Equipment

(Gas Wellhead

Equipment)

SUB-SEA WELLHEAD SYSTEM, 2M-

15M

UNIT; SUB-SEA WELLHEAD SYSTEM, 2M-15M TYPE,API SPECIFICATION 17 D,PSL 2,

3, 3G AND 4 6000014703

493Drilling Equipment

(Drilling Items, Other)

PUMP, CENTRIFUGAL, VERTICAL -

LINESHAFT

PUMP CENTRIFUGAL; VERTICAL - LINESHAFT TYPE,SIZE 8 IN X 3 IN X 1-11/16

IN,1000 GPM AT 600 FT TDH, 1780 RPM,11 STAGE(S),DIESEL ENGINE

DRIVER,CASING, IMPELLERS AND SHAFT WET PART,STEEL CASING,17-4PH SS

SHAFT,BRONZE IMPELLER,VIL, ENCLOSED LINESHAFT MTG,14 IN SHAFT STICK UP,

DYNAMICALLY-BALANCED IMPELLER, BOWL SHAFT DIA.: 1.6875 IN, BOWL

MATERIAL: CAST IRON W GLASS ENAMEL STD., SUCTION BELL BEARING: BRONZE,

BOWL BEARING MATERIAL: BRONZE, STRAINER MATERIAL: GALVANIZED STEEL

(CONE), SERVICE: NON-TOXIC WATER, 70 DEG F, SP. GR.: 1.0

1000751965





9COM/9CAT


(Drilling Items, Other)COUPLING: TUBE, 3 IN, STEEL,

COUPLING; TUBE TYPE,SIZE 3 IN,STEEL,SEAMLESS,WITH OIL IMPREGNATED

REDWOOD INNER LINING, FOR WESTERN TYPE C LEFT HAND THD WATERWELL

TUBES, MARLEY CO LAYNE & BOWLER INC DWG #1727 A

1000240014


(Drilling Items, Other)BLOCK: CROWN

BLOCK; CROWN TYPE,API COMPLIANT6000004101


(Drilling Items, Other)BOARD: MONKEY; DRLG RIG

BOARD; MONKEY TYPE,MONKEY,MONKEY BOARD6000004151


(Drilling Items, Other)UNIT: TESTING, SKID MOUNTED

UNIT; SKID MOUNTED TYPE,PULSE VARIABLE SPEED DRIVE, SUPPLIED WITH

GENERATOR SET, MOTOR CONTROLLER, JUNCTION BOXES, CABLE, CIRCUIT

BREAKERS AND OTHER EQUIPMENT & ACCESSORIES, USED FOR TESTING

SUBMERSIBLE PUMP MPTORS

6000013381



SPARES: OILWELL; TRAVELING

BLOCK

SPARE PART 9COM; OILWELL DIV, UNITED STATES STEEL,BLOCK TRAVELLING

TABLE ROTARY 6000004539



VALVE; MUD; GATE OR PLUG;

DRLG

VALVE GATE MUD; API COMPLIANT,API COMPLIANT6000004157


Documents

Aramco Services Company (ASC) 2015 1