Embed Size (px)
Citation preview
Botanicals Materials:□ Greetings to Go
Tools and Supplies:□ Scor-Pal®□ Adhesive□ Tape□ 3x14” CS® Grid Ruler□ Scissors□ Stapler and Staples
□ Paper Piercing Tool and Cork Board□ CS® Amethyst Ink (Optional)□ Dot Pattern Embossing Folder (Optional)□ Embossing Machine (Optional)□ Ranger SticklesTM Glitter Glue (Optional)
Preparation:
1. Trim the White, Yellow and Green Printed Cutaparts into sections as indicated by the artwork.
2. Scoring and folding instructions are listed within the instructions for each card set.
3. If you do not have an item to complete the card as shown, simply omit or substitute the item.
All rights reserved. ©2015, Club Scrap, Inc. (888) 634-9100 • www.clubscrap.com • email: [email protected]
Assembly Line Cardmaking
April 2015 Greetings to Go
Botanicals
April 2015 • Botanicals Greetings to Go • Page 2 of 4
Set A: 5x7” White Cards with 4½x6½” Brown and 4¼x6¼” Pink PanelsScore and fold each 7x10” White Card horizontally at 5”.
©2015, Club Scrap, Inc. (888) 634-9100 • www.clubscrap.com • email: [email protected]
Notes: Nest the Yellow cutapart onto the Pink panel; attach three sequins with brads; layer onto the Brown panel and card base; add the Yellow “Have a Nice Day” cutapart to the inside of the card.
Notes: Staple a folded ribbon to the upper right corner of the Green cutapart; adhere the White and Green cutaparts to the panels and card base; attach the Green “This One” cutapart to the inside of the card.
Notes: Place the Yellow cutapart in the lower right corner of the Pink panel; wrap ribbon around the left and top edges of the panel; secure ribbon ends with tape; nest the panels onto the card base.
Notes: Tear away the outside edges of the Pink panel; center
the Yellow cutapart and Pink panel onto the Brown panel; wrap ribbon
around the left edge of the card and secure ends with tape; tie a
short length of ribbon onto the stretched ribbon; attach the Yellow “Celebrate!” cutapart to the inside
of the card.
April 2015 • Botanicals Greetings to Go • Page 3 of 4
Set B: 4¼x5½” Lilac Tent Cards with 4¼x8” Lilac Card Stands, 2½x3½” Brown Panels and2¼x3¼” Yellow PanelsScore and fold each 4¼x12” Lilac Card horizontally at ½, 6 and 11½”. Score and fold each 4¼x8” Lilac Card Stand horizontally at 2, 4 and 6”. Adhere one 1/2” flap to the outside edge of the stand, and the other 1/2” flap to the center valley fold of the stand. Click here to view a short assembly video.
©2015, Club Scrap, Inc. (888) 634-9100 • www.clubscrap.com • email: [email protected]
Notes: Nest the White cutapart onto the Yellow panel; tie ribbon around the top and attach a sequin to the bottom corner with a brad; nest onto the Brown panel; attach to a narrow Green cutapart; adhere to the front flap of the stand; adhere the Green “With Much Love” cutapart to the front card panel; attach three more sequins with brads.
Notes: Staple a folded ribbon to
the White cutapart and nest
onto the Yellow and Brown
panels; attach to a small Green
cutapart and adhere to the
front flap of the tent; center the
Green “Celebrate”
cutapart to the card panel.
Notes: Attach a piece of folded ribbon to the top edge of the White “Thanks” cutapart with a sequin and brad; nest onto the Yellow and Brown panels; add to a small Green cutapart and adhere to the front flap of the tent; attach the Green “You Are the Best!” cutapart to the front of the card.
Notes: Staple a piece of folded ribbon to the upper right corner of the White
cutapart and attach a sequin with a brad; nest onto the Yellow and Brown panels;
layer onto the front flap of the tent with a small Green cutapart; staple ribbon to the
upper left corner of the Green “Have a Great Day!” cutapart and layer onto the
front of the card.
April 2015 • Botanicals Greetings to Go • Page 4 of 4
Set C: 3½x5” Yellow Cards with 3¼x4¾ Green and 3x4½” Lilac PanelsScore and fold each 5x7” Yellow Card horizontally at 3½”.
©2015, Club Scrap, Inc. (888) 634-9100 • www.clubscrap.com • email: [email protected]
Notes: Nest the White cutapart onto the Lilac panel; tie with ribbon; layer onto the Green panel and Yellow card base.
Notes: Emboss the Lilac panel with a dot patterned embossing folder and rub
the raised surface with Amethyst ink; nest the White cutapart onto the Lilac
and Green panels; attach three sequins to the flower buds with brads; layer onto the card base; adhere the White “Enjoy”
cutapart to the inside of the card.
Notes: Attach three sequins to the White cutapart with brads; nest the cutapart onto the Lilac and Green panels and adhere to the card base.
Notes: Tie ribbon around the White
cutapart and layer onto the Lilac and
Green panels; adhere to the card
base.
