Applied Statistics for QA, QC, Manufacturing, And Design Control-SFO

SPEAKER

GlobalCompliancePanel

2-day In-person Seminar:

www.globalcompliancepanel.com All rights are reserved GlobalCompliancePanel.

Knowledge, a Way Forward

Applied Statistics for QA, QC, Manufacturing, and Design Control

John N. Zorich Statistical Consultant & Trainer, Ohlone College & SV Polytechnic

John N. Zorich, has spent 35 years in the medical device manufacturing industry; the rst 20 years were as a "regular" employee in the

areas of R&D, Manufacturing, QA/QC, and Regulatory; the last 15 years were as consultant in the areas of QA/QC and Statistics. His

consulting clients in the area of statistics have included numerous start-ups as well as large corporations such as Boston Scientic,

Novellus, and Siemens Medical. His experience as an instructor in statistics includes having given 3-day workshop/seminars for the past

several years at Ohlone College (San Jose CA).

OVERVIEW

John N. Zorich

July 9th & 10th, 2015

SFO, CA

9.00 AM to 6.00 PM

How to calculate condence intervals (for proportions and for measurements), including a discussion of how to choose sample size

How to perform an interpret t-Tests, including consideration of "signicance", "p-values", "power" and sample-size considerations

How to perform calculation of condence/reliability for attribute data

How to perform calculation of condence/reliability for Normally-distributed variables (measurement) data, including a discussion of how

to choose sample size

How to assess Normality and how to "transform" non-normal data into Normality so that they can be used with Normal K-tables

Course "Applied Statistics for QA, QC, Manufacturing, and

Design Control" has been pre-approved by as eligible for RAPS

up to credits towards a participant's RAC recertication upon 12

full completion.

AGENDA

WHY SHOULD YOU ATTEND

WHO WILL BENEFIT




DAY ONE DAY TWO

Lecture 1: Regulatory Requirements

Lecture 2: Vocabulary and Concepts

Lecture 3: Condence Intervals (attribute and variables data)

Lecture 4: t-Tests and related "power" estimations

Lecture 5: Condence/Reliability calculations for Proportions

Lecture 6: Condence/Reliability calculations for Normally distributed

data (K-tables)

Lecture 7: Normality Tests and Normality Transformations

Lecture 8: Reliability Plotting (e.g., for non-normal data and/or

censored studies)

Lecture 9: Statistical Analysis of Gages (introduction to Gage R&R,

Gage Correlation, etc.)

Lecture 10: QC Sampling Plans (attribute AQL plans, and alternatives

to such plans)

Lecture 11: Statistical Process Control (introduction, with focus on

XbarR charts)

Lecture 12: Process Capability Indices calculations(Cp, Cpk, Pp, Ppk)

Lecture 13: Implementation Recommendations

Almost all design and/or manufacturing companies evaluate product and processes either to establish product/process specications, to QC to such

specications, and/or to monitor compliance to such specications.

The various statistical methods used to support such activities can be intimidating to master. If used incorrectly, such methods can result in new products

being launched that should have been kept in R&D; or, conversely, deciding to not launch a new product because of incorrectly calculated product reliability

or process capability. In QC, mistakenly chosen sample sizes and inappropriate statistical methods may result product being rejected that should have

passed, and vice-versa.

This seminar provides a practical approach to understanding how to interpret and use a standard tool-box of statistical methods, including condence

intervals, t-tests, Normal K-tables, Normality tests, condence/reliability calculations, AQL sampling plans, measurement equipment analysis, and Statistical

Process Control. Without a clear understanding and correct implementation of such methods, a company risks signicantly increasing its complaint rates,

scrap rates, and time-to-market; and signicantly reducing its product and service quality, its customer satisfaction levels, and its prot margins.

QA/QC Supervisor

Process Engineer

Manufacturing Engineer

QC/QC Technician

Manufacturing Technician

R&D Engineer




1. Learning Objectives

2. Participation certificates

3. Interactive sessions with the US expert

4. Post event email assistance to your queries.

5. Special price on future purchase of web based trainings.

6. Special price on future consulting or expertise services.

7. Special price on future seminars by

GlobalCompliancePanel.

8. Seminar Kit includes presentation handout, ID card,

brochure, trainings catalog, notepad and pen.

9. Networking with industry's top notch professionals

What you get

Credit Card: Use the Link to make Payment by

Visa/Master/American Express card click on the register

now link

Check: Kindly make the check payable to NetZealous DBA

GlobalCompliancePanel and mailed to 161 Mission Falls

Lane, Suite 216, Fremont, CA 94539, USA

PO: Please drop an email to

[email protected] or call the our toll

free +1-800-447-9407 for the invoice and you may fax the

PO to 302 288 6884

Wire Transfer: Please drop an email to

[email protected] or call our toll free

+1-800-447-9407 for the wire transfer information

Payment Options:

Get fabulous discounts by participating in groups of two or more.

Price for One Delegate pass Price: $1,695.00

Register now and save(Early Bird) (Early Bird) Price $200.

Pricing List

**Please note the registration will be closed 2 days (48 Hours) prior to

the date of the seminar.

Group participations

AttendeesNo Discount

1 2 Attendees

2 3 to 6 Attendees

3 7 to 10 Attendees

4 10+ Attendees

10% off

20% off

25% off

30% off

Register Here

Documents

Applied Statistics for QA, QC, Manufacturing, And Design Control-SFO