APPLICATIONS - · PDF file- Heating - Air conditioning ... APPLICATIONS ADVANTAGES ... 9683 - Pump name plate 9902 A - Top shaft end screw 9902 B - Bottom shaft end screw

250

0 Qm3/h 160

Hm MULTi-V

Pumping of non-loaded clear liquids for the housing.agricultural and industrial sectors : - Water supply - Boosting - Sprinkling - Irrigation - High-pressure washing - Fire protection - Heating - Air conditioning - Water treatment (demineralization.filtering)

And incorporation in all modular systems.

Fluids pumped • 304 range: clear non-aggressive liquid (drinking water, water with glycol) • 316L range: aggressive liquids (sea water. demineralized water, etc.).

OPERATING LIMITS Flow rates up to : 160 m3/hHead up to : 250 mMax. discharge pressure : 16 & 25 barMax. suction pressure : 10 barTemperature range : – 15° à + 120°*CMax. ambient temperature : + 40°CDN of ports : 25 to 100*depending on mechanical seal

STAINLESS STEEL MULTISTAGE VERTICAL PUMPS

In-Line series - 60 Hz

APPLICATIONS

ADVANTAGES

• Stainless steel hydraulic unit : anti-corrosion safety and increased pump lifetime. • Oversized (lantern) bearing for longer motor bearing life; eliminates axial and other adjustments of moving parts.• Tungsten carbide intermediate bearing to control and eliminate vibration and stabilize the shaft with a large number of stages. • Thick impeller sealing rings between stages for insensitivity to thermal ex-pansion and elimination of risk of seiz-ing up.• Optimal reliability: high-efficiency impeller profiles limit the number of stages, the sizes of the shafts, ans axial thrusts . • Standardized mechanical seal, can be used up to +120°C.• Easy to install: In-Line ports.

MULTi-V 36C, 60C, 80, 100• Easy maintenance : Mechanical Cartridge Seal available on all models. Allows the fitter or the operator to replace the MS without removing the pump• Concept Spacer available on all models ≥11kW. Allows the fitter or the operator to replace the MS without removing the motor.

• MULTi-V PN16 oval flanges

• MULTi-V PN25 “Victaulic” union

• MULTi-V 8000 / 100.00 PN 16 and PN 25

• MULTi-V 1800 PN 25 All 316L stainless steel hydraulic parts

• Mechanical cartridge Seal

N.T. No 141-7-60Hz/ENG. - Ed. 1/04-08

1

MULTI-V

DESIGN

• Hydraulic part- Centrifugal.- Multistage, from 2 to 20 stages.- Vertical axis, suction and IN-LINE discharge ports at bottom.

- Casing for PN 16 and PN 25.- Bottom guide bearing above second stage for 1 to 100 m3/h versions (above 1st stage on 2- and 3-stage models).

- Shaft sealing by standardized mechanical seal.

- Hydraulics and casing assembled by tie rods.

• Motor- Standard ventilated.- With flange and shaft end as per IEC standard.

- Link to pump by coupling with guards.

Rotation speed : 3500 and 1750 rpmWinding:Motor T ≤ 4kW 3-ph : 220-255 VΔ 380-440 VY Motor T4 ≥ 4kW 3-ph : 380-440 VΔFrequency : 60 Hz Insulating category : 155°C (F)Protection index : IP 55

STANDARD CONSTRUCTIONMain part Material

liquids non-aggressive aggressive

models all except 80/100 36C/60C

Suc.- Discharge casing

Stainless steel 304 or EN GJL 250 cast iron

Inox 316L cast iron steel

Motor support bearing EN GJL 250 cast iron steel

Impellers 304 stainless steel

316L stainless steel

Stages (casings) 304 SS 316L SS

Outside jacket tube 304 SS 316L SS

Pump shaft 304 SS 316L SS

Intermediate bearing Tungsten carbide

Mechanical seal Silicon carbide/Carbon

O-rings EPDM (120°) Viton (90°)

Plugs 316L SS 316L SS

NB: 316L stainless steel (X2Cr Ni Mo 17.12.2) is a recommended material which is highly resistant to corro-sion. Transport of clean, clear liquids, containing no fibre and little sand/silica (maximum concentration 40g/m3).* AISI 304 stainless steel. The MULTi-V 80/100/36C/60C models are fitted with an AISI 431 stainless steel pump shaft.

MULTI-V CONSTRUCTION

100% IEC standard motor

All stainless steel hydraulic partOversized bearing secured housing allowing easy assembly of the motor

Rigid couplingwith safety protector

Filling plug – Draining valve

Standard mechanical seal :silicon carbide/carbon

304 or 316Lstainless steel impeller

Tungsten carbideintermediate bearing

Teflon impeller seal ring

Priming/draining plug

PN16 ou PN25 Version

NB : The pumps MULTi-V 36C, 60C, 80 and 100 are all supplied with a cartridge mechanical seal and with a spacer for models above 11kw.

2

MULTI-V

IDENTIFICATIONMULTI-V10004/2N-OGE-T/2/6/OEM/XX/B

Pump family

Nominal flow in m3/hr (at 60 Hz / 2 pole)

Number of impellers

/1 or /2 : number of machined impellers out of the total impellers. Eg.: 8004/2, 2 machined impellers out of 4

N = Standardised motor if the same poweris available with a non-standardised motor

O = Oval flanges PN16F = Round flanges PN25R = Victaulic

G = GJL-250 cast iron pump body+ 304 stainless steel hydraulic bodyS = 304 stainlesse steelX = 316L stainless steel

E = O-rings: EPDM V = O-rings: VITON

Version index

Technical definition code

Original Equipement Manufacturer

Nothing = 50 hz 6 = 60 hz

Number of pole

M = Single-phaseT = Three-phase : 60Hz - 220 to 255 V

380 to 440VT4 = Three-phase : 60Hz - 380 to 440Vnothing = no motor

CONFIGURATION OF SERIESSERIE max service pressure motor 60 Hz suction and discharge number of stages

2 pole 4 pole16 bar • --- oval G1 2 to 10

MULTI-V 100 25 bar • --- round DN 25 2 to 1616 bar • --- oval G1 2 to 8

MULTI-V 200 25 bar • --- round DN 25 2 to 1425 bar • --- ”Victaulic” 11/4 2 to 1416 bar • --- oval G11/4 2 to 8

MULTi-V 400 25 bar • --- round DN 32 2 to 1416 bar --- • round DN 32 10-14-2025 bar • --- ”Victaulic” 1”1/4 2 to 1416 bar • --- oval G11/2 2 to 8

MULTi-V 800 25 bar • --- round DN 40 2 to 1116 bar --- • round DN 40 10-14-1925 bar • --- ”Victaulic” 2” 2 to 1116 bar • --- oval G2 2 to 6

MULTi-V 1600 25 bar • --- round DN 50 2 to 616 bar --- • round DN 50 5 to 1216 bar • --- round DN 50 (Ø65) 2 to 6

MULTi-V 1800 25 bar • --- round DN 50 (Ø65) 2 to 1016 bar --- • round DN 50 (Ø65) 9-12-1616 bar • --- round DN 65 (Ø80) 2 to 5

MULTi-V 3600 25 bar • --- round DN 65 (Ø80) 2 to 916 bar --- • round DN 65 (Ø80) 6 to 1616 bar • --- round DN 80 (Ø80) 2 to 5

MULTi-V 6000 25 bar • --- round DN 80 (Ø80) 2 to 816 bar --- • round DN 80 (Ø80) 4 to 12

MULTi-V 8000 16 bar • --- round DN 100 (Ø100) 1 to 525 bar • --- round DN 100 (Ø100) 1 to 7

MULTi-V 100.00 16 bar • --- round DN 100 (Ø100) 1 to 425 bar • --- round DN 100 (Ø100) 1 to 5

3

MULTI-V

0

20

40

60

80

100

120

140

160

180

200

220

240

260

0 20 40 60 80 100 120 140 160 180

2 m

3 6

"1

m3

6"

4 m

36"

8 m

36"

16 m

36"

16 m

38"

36 m

38"

60 m

3 8

"

80 m

310

"

100

m3

10"

MULTI-V 60 Hz

0

20

40

60

80

100

120

140

160

180

200

220

240

260

hm

Qm3/h0 20 40 60 80 100 120 140 160 180

2 m

3 6

"1

m3

6"

4 m

36"

8 m

36"

16 m

36"

16 m

38"

36 m

38"

60 m

3 8

"

80 m

310

"

100

m3

10"

MULTI-V 60 Hz

HYDRAULIC SELECTION CHARTS - MULTI-V - 2 POLE - 60 Hz

Caption : 2 pole motor

4

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

110

0 10 20 30 40 50

18 8"

16 6"

36 8"

60 8"

MULTI-V 60 Hz

0

10

20

30

40

50

60

70

80

90

100

110

0 10 20 30 40 50

18 8"

16 6"

36 8"

60 8"

MULTI-V 60 Hz

hm

Qm3/h

HYDRAULIC SELECTION CHARTS - MULTI-V - 4 POLE - 60 Hz

Caption : 4 pole motor

5

MULTI-V

4610A6521A6521B

9902D9902C9946C9923B

9946B

6571

05

1150

3044

2460A

3400

8010

6545A65463011

9902A9946A7212

4240

42134220

1154

6545B

2520

9130

2110

1111 9902B9942

1160

4610B

2410

22502460D

MULTi-V 1/2/41”1/4 - PN16

4610B

1720

2460A

MULTi-V 1/21"1/4 - PN25 VICTAULIC

MULTi-V 4 DN32 - PN25

MULTi-V 1/2DN25 - PN25

SECTIONAL VIEW - MULTI-V 1 - 2 - 4

PART LIST 1111 - Pump casing 1150 - Stage housing with return channel 1154 - Stage centering device 1160 - Stage housing without return channel 1720 - Pump fixing plate• 2110 - Pump shaft• 2250 - Impeller 2410 - Impeller spacer 2460 A - Shaft jacket spacer 2460 C - Mechanical seal keeper ring 2460 D - Intermediate washer 2520 - Thrust ring 2911 - Bottom shaft end washer• 3011 - Lantern ball bearing 3044 - Stage casing with intermediate bearing

3160 - Motor support bearing• 3400 - Shaft jacket 4213 - Stationary ring holder• 4220 - Rotary part | Mechanical• 4240 - Stationary ring | seal• 4610 A - O-ring (filling plug)• 4610 B - O-ring (outer jacket tube)• 4610 C - O-ring | (Priming and• 4610 D - O-ring | draining plug) 6515 - Drain and priming plug 6521 - Filling and venting plug

• 6545 A - Circlip (lantern bearing) 6545 B - Half keeper (thrust ring)• 6546 - Circlip (lantern bearing) 6571 - Tie rod 7212 - Coupling 7450 - Coupling guard• 8010 - Flanged electric motor 9130 - Outer ealing jacket tube 9902 A - Top shaft end screw 9902 B - Bottom shaft end screw 9902 C - Coupling fixing screw

9902 D - Motor fixing screw 9906 E - Motor fixing screw 9923 B - Tie rod nut 9923 E - Nut for fixing screw motor 9942 - Fan washer under screw 9902 B 9946 A - Washer under screw 9902 A 9946 B - Washer under nut 9923 B 9946 C - Washer under screw 9902 C

• Recommended spare parts.

6

MULTI-V

4610A

9902D9902C9946C9923B

9946B6571

1111

654630119902A9946A

4240

421342201154

9130

2110

2250

1720

1150

3044

2460A

3400

8010

6545A

2460C

6545B

2520

9902B9942

2911B

11604610B

2410

4610B

4610F

2460A

MULTi-V 81”1/2 - PN16

MULTi-V 82"-PN25 - VICTAULIC

MULTi-V 8DN40 - PN25

SECTIONAL VIEW - MULTI-V 8

7

MULTI-V

6521A6521B

9902C4610A

9946B

6571

9902D

9460A9934A

11503044

2460A3400

80109906E6545A65469929E

4610E3011

9902A9946A

721242404213

42201154

2460C6545B2520

91302110

1111

9902B2911

11604610B

2410

2250

2460D

4610B

1,5


8

MULTI-V

MULTi-V 18DN50 - PN16 - PN25

6521B

80109906E6545A

65469929E

11544610B

4213

7212

9130

2410

2110

6545B2520

22501150

4240

4220

2460C

4610E3011

9902A9683

31609946A

3044

11604610B

2460A3400

2460A

11119902B

2911

9460A9934A

9902D7450

9946B

6571

4610D6515

4610C

2460D

9902C

9946C

6521A4610A


PART LIST 1111 - Pump casing 1150 - Stage housing with return channel 1154 - Stage centering device 1160 - Stage housing without return channel• 2110 - Pump shaft• 2250 - Impeller 2410 - Impeller spacer 2460 A - Shaft jacket spacer 2460 C - Mechanical seal keeper ring 2460 D - Intermediate washer 2520 - Thrust ring 2911 - Bottom shaft end washer• 3011 - Lantern ball bearing 3044 - Stage casing with intermediate bearing 3160 - Motor support bearing• 3400 - Shaft jacket

4213 - Stationary ring holder• 4220 - Rotary part | Mechanical • 4240 - Stationary ring | seal• 4610 A - O-ring (filling plug)• 4610 B - O-ring (outer jacket tube)• 4610 C - O-ring | priming and• 4610 D - O-ring | draining plug• 4610 E - O-ring 6515 - Drain and priming plug 6521 A - Filling and venting plug 6521 B - Filling and venting plug• 6545 A - Circlip (lantern bearing) 6545 B - Half keeper (thrust ring)• 6546 - Circlip (lantern bearing) 6571 - Tie rod 7212 - Coupling 7450 - Coupling guard

• 8010 - Flanged electric motor 9130 - Outer ealing jacket tube 9460 A - Round gasket 9683 - Pump name plate 9902 A - Top shaft end screw 9902 B - Bottom shaft end screw 9902 C - Coupling fixing screw 9902 D - Motor fixing screw 9906 E - Motor fixing screw 9929 E - Nut for fixing screw motor 9934 A - Counter-flange bolt 9946 A - Washer under screw 9902 A 9946 B - Washer under nut 9923 B 9923 B - Tie rod nut 9946 C - Washer under screw 9902 C


9

MULTI-V

9460A

9934A

2460D

65154610D4610C

6571

9946B

9902C9946C

80109906E6545A

65469929E

30119683

9902A9946A

7212

4240

42131154

2460C6545B

25209130

2110

4220

2410

22501150

3044

34002460A

1160

9902B1111

9923B


MULTi-V 36CDN65 - PN25


PART LIST 1111 - Pump casing 1150 - Stage housing with return channel 1154 - Stage centering device 1160 - Stage housing without return channel• 2110 - Pump shaft• 2250 - Impeller 2410 - Impeller spacer 2460 A - Shaft jacket spacer 2460 C - Mechanical seal keeper ring 2460 D - Intermediate washer 2520 - Thrust ring • 3011 - Lantern ball bearing 3044 - Stage casing with intermediate bearing 3160 - Lantern

3400 - Shaft jacket 4213 - Stationary ring holder• 4220 - Rotary part | Mechanical • 4240 - Stationary ring | seal• 4610 C - O-ring • 4610 D - O-ring 6515 - Drain and priming plug• 6545 A - Circlip (lantern bearing) 6545 B - Half keeper (thrust ring)• 6546 - Circlip (lantern bearing) 6571 - Tie rods 7212 - 4 screw coupling 7450 - Coupling guard 7470 - Coupling guard fixing clip• 8010 - Flanged electric motor

9130 - Outer sealing jacket tube 9683 - Typeplate 9902 A - Top shaft end screw 9902 B - Bottom shaft end screw 9902 C - Coupling fixing screw 9906 E - Motor fixing screw 9929 E - Nut for fixing screw motor 9923 B - Tie rod M16 nut 9946 A - Washer under screw 9902 A 9946 B - ‘Lock washer Ø 16 9946 C - Washer under screw 9902 C • Recommended spare parts.

10

MULTI-V

9923B

2110

4220

4240

6571

6515

4610C

9946B

1154

2250

2410

3044

4213

7212

3160

4610D

6545A

3011

9902A

6546

9130

6545B

2460D

1150

3400


SECTIONAL VIEW - MULTI-V 60 1150 - Stage housing with return channel 1154 - Stage centering device• 2110 - Pump shaft• 2250 - Impeller 2410 - Impeller spacer 2460 D - Washer between impellers 2520 - Thrust ring• 3011 - Lantern ball bearing 3044 - Stage casing with intermediate bearing 3160 - Motor support bearing 3400 - Shaft jacket 4213 - Stationary ring holder• 4220 - Rotary part | Mechanical • 4240 - Stationary ring | seal• 4610 C - O-ring • 4610 D - O-ring 6515 - Drain and priming plug• 6545 A - Circlip (lantern bearing) 6545 B - Half keeper (thrust ring)• 6546 - Circlip (lantern bearing) 6571 - Tie rods 7212 - 4 screw coupling 7450 - Coupling guard 7470 - Coupling guard fixing clip 9130 - Outer ealing jacket tube 9902 A - Top shaft end screw 9902 B - Bottom shaft end screw 9906 E - Motor fixing screw 9929 E - Nut for fixing screw motor 9923 B - Tie Rod M16 nuts 9946 B - Lock washer Ø16


11

MULTI-V


6545A

65154610D4610C

9902A

7212

42404220

2110

2250

3400

2250

9906E

74707450

9929E

9923B9946B

6571

91301150

6546

3400

SECTIONAL VIEW - MULTI-V 80 - 100

Part list 1150 - Stage housing with return channel• 2110 - Pump shaft• 2250 - Impeller 3400-Shaft jacket• 4220 - Rotary part | Mechanical • 4240 - Stationary ring | seal• 4610 C - O-ring • 4610 D - O-ring 6515 - Drain and priming plug• 6545 A - Circlip (lantern bearing)• 6546 - Circlip (lantern bearing) 6571 - Tie rod 7212 - 4 screw coupling 7450 - Coupling guard 7470 - Coupling guard fixing clip 9130 - Outer sealing jacket tube 9902 A - Top shaft end screw 9906 E - Motor fixing screw 9929 E - Nut for fixing screw motor 9923 B - Tie rod M16 nut 9946 B - Lock washer ø 16


12

MULTI-V

SECTIONAL VIEW - BEARING MULTI-V 80 - 100

Cartridge mechanical seal

13

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

3210

114

112

110

109108

107

106

105

104

103

116

102

0,0

1,0

2,0

3210

0

10

20

30

40

432100123456789

10

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/s

N.P

.S.H

(m)η%

N.P.S.H

MULTi-V1m3 60hz

0 30

0,2 0,4 0,6 0,8 1

40 50 602010

0

0

100

200

300

400

500

600

700

0 2 4 6 8 10 12

η%

HYDRAULIC PERFORMANCES - 3500 RPM - MULTI-V 1M3 - 2 POLES - 60Hz

Caption : Motor 2 pole

14

MULTI-V

0

0

0

0 5 10 15 20

2 4 6 8 10 12 14 16 18

10 20 30 40 50 60 70 80 90 100 110

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

0 1 2 3 4 5 6

0 1 2 3 4 5 6

0 1 2 3 4 5 60

1

2

3

0

20

40

0

2

4

6

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/sN

.P.S

.H (m

)η%

N.P.S.H

MULTi-V2m3 60hz

0

100

200

300

400

500

600

700

202

203

204

206

205

212

210

208

214

207

211

η%



15

MULTI-V

0

0 10 20 30

020 40 60

1 280 100 120 140 160

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

0 1 2 3 4 5 6 7 8 9 10

0 1 2 3 4 5 6 7 8 9 10

0 1 2 3 4 5 6 7 8 9 100

1

2

3

4

5

0

20

40

0

0

100

200

300

400

500

600

700

4

8

12

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/s

N.P

.S.H

(m)η%

N.P.S.H

MULTi-V4m3 60hz

402

403

407

404

408

406

405

414

412

410

411

η%



16

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

00

0 10 20 30 40 50 60

50 100 150 200 250 300

0 1 2 3 4 5

2 4 6 8 10 12 14 16 18

0 2 4 6 8 10 12 14 16 18

0 2 4 6 8 10 12 14 16 180

2

4

6

0

20

40

60

0

2

4

6

8

802

803

807

804

808

806

805

811

810

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/sN

.P.S

.H (m

)η%

N.P.S.H

MULTi-V8m3 60hz

η%



17

MULTI-V

0 0

100

200

300

10

20

30

40

50

60

70

80

90

100

00

0 20 40 60 80 100

0 1 2 3 4 5 6 7 8

100 200 300 400 5005 10 15 20 25 30

0 5 10 15 20 25 30

0 5 10 15 20 25 300,01,02,03,04,05,06,0

0

20

40

60

0

2

4

6

8

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/s

N.P

.S.H

(m)η%

N.P.S.H

MULTi-V16m3 60hz

1602

1603

1604

1605

1606

η%



18

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

00

0 20 40 60 80 100

0 2 4 6 8

100 200 300 400 5004 8 12 16 18 22 26

0 4 8 12 16 18 22 26

0 4 8 12 16 18 22 26

30

30

300

5

10

15

0

20

40

60

0

0

200

400

600

5

10

15

20

1810

1809

1808

1807

1806

1805

1804

1803

1802

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/sN

.P.S

.H (m

)η%

N.P.S.H

MULTi-V18m3 60hz

η%



19

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

0

0 50 100 150 200

0 100 200 300 400 500 600 700 800 900 1000

0 20 40 60 80 100 120 140 160

8 16 24 32 40 48 56

0 8 16 24 32 40 48 56

0 8 16 24 32 40 48 560

5

10

15

20

25

0

20

40

60

0

5

10

15

20

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/s

N.P

.S.H

(m)η%

N.P.S.H

MULTi-V36m3 60hz

3608

3609

3607

3606

3605

3604

3603

3602

η%



20

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

230

240

0

0 50 100 150 200 250

0 200 400 600 800 1000 1200

0 5 10 15 20

10 20 30 40 50 60 70 80

0 10 20 30 40 50 60 70 80

0 10 20 30 40 50 60 70 8005

1015202530

0

20

40

60

0

0

200

400

600

2

4

6

8

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/sN

.P.S

.H (m

)η%

N.P.S.H

MULTi-V60m3 60hz

6006

6007

6008

6005

6004

6003

6002

η%



21

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

0

0 100 200 300 400 500

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200

0 10 20 30

20 40 60 80 100 120 140

0 20 40 60 80 100 120 140

0 20 40 60 80 100 120 14005

10152025303540

0

20

40

60

0

4

8

12

16

8005

8004

8003

8001/1

8002/2

8002

8003/1

8004/1

8004/2

8002/1

8003/2

8001

8005/1

8005/2

H m

P kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/h

Q l/min

N.P

.S.H

(m)η%

MULTi-V80m3 60hz

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

0

0 100 200 300 400 500

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200

0 10 20 30

20 40 60 80 100 120 140

0 20 40 60 80 100 120 140

0 20 40 60 80 100 120 14005

10152025303540

0

20

40

60

0

4

8

12

16

8004

8003

8001/1

8002/2

8002

8003/1

8004/1

8004/2

8002/1

8003/2

8001

8005/1

8005/2

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/s

N.P

.S.H

(m)η%

N.P.S.H

MULTi-V80m3 60hz

η%



22

MULTI-V

H m

P kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/h

Q l/minN

.P.S

.H (m

)η%

N.P.S.H

MULTi-V100m3 60hz

000

0 10 20 30 40

500 1000 1500 2000 2500

0 100 200 300 400 500 600

20 40 60 80 100 120 140 160

0 20 40 60 80 100 120 140 160

0 20 40 60 80 100 120 140 160

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

0

10

20

30

40

0

20

40

60

0

5

10

15

20

100.03

100.01/1

100.02/2

100.02

100.03/1

100.02/1

100.03/2

100.01

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/sN

.P.S

.H (m

)η%

N.P.S.H

η%

MULTi-V100m3 60hz

000

0 10 20 30 40

500 1000 1500 2000 2500

0 100 200 300 400 500 600

20 40 60 80 100 120 140 160

0 20 40 60 80 100 120 140 160

0 20 40 60 80 100 120 140 160

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

0

10

20

30

40

0

20

40

60

0

5

10

15

20

100.03

100.01/1

100.02/2

100.02

100.03/1

100.02/1

100.03/2

100.01



23

MULTI-V

0

10

20

30

40

50

00

0

0 10 20 30 40 50 60

1 2 3 4 5

50 100 150 200 250 3002 4 6 8 10 12 14 16 18

0 2 4 6 8 10 12 14 16 18

0 2 4 6 8 10 12 14 16 180,0

1,0

01020304050

0

0

50

100

150

1234567

1608

1610

1612

1605

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/s

N.P

.S.H

(m)η%

N.P.S.H

MULTi-V16m3 60hz

η%



24

MULTI-V

0

10

20

30

40

50

60

70

80

90

0

0 10 20 30 40 50 60

0

0

50 100 150 200 2502 4 6 8 10 12 14 16 18

0 2 4 6 8 10 12 14 16 18

0 2 4 6 8 10 12 14 16 180,0

1,0

2,0

3,0

01020304050

0

0

100

200

300

1234567

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/sN

.P.S

.H (m

)η%

N.P.S.H

MULTi-V18m3 60hz1816

1810

1812

1814

1807

η%



25

MULTI-V

0

10

20

30

40

50

60

70

80

90

100

00

0 20 40 60 80 100

0 2 4 6 8

100 200 300 400 5005 10 15 20 25 30

0 5 10 15 20 25 30

0 5 10 15 20 25 30

3214

3216

0,01,02,03,04,05,06,0

01020304050

0

0

100

200

300

1234567

3208

3210

3212

3206

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/s

N.P

.S.H

(m)η%

N.P.S.H

MULTi-V36m3 60hz

η%



26

MULTI-V

0

10

20

30

40

50

60

70

80

00

0 20 40 60 80 100 120 140

100 200 300 400 500 600 7000 2 4 6 8 10

5 10 15 20 25 30 35 40

0 5 10 15 20 25 30 35 40

0 5 10 15 20 25 30 35 400

1

2

3

4

5

0

20

40

60

0

0

100

200

1

2

3

4

H m

P2 kW

H ftQ Imp.gpm

Q m3/h

Q m3/h

Q m3/h

Q l/min

Q l/sN

.P.S

.H (m

)η%

N.P.S.H

MULTi-V60m3 60hz

6012

6010

6008

6006

6004

η%



27

MULTI-V

Vidange

Purge

Livré avec CB,joints et boulons

CBOV Ø G1 (PN16)

212180

X

100 4 Ø 12

2 Ø 12

RpG1

75

100 204

160

157 20

50

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

Purge


CBOV Ø G1 (PN16)

212180

X

100 4 Ø 12

2 Ø 12

RpG1

75

100 204

160

157 20

50

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 14

180 212

70

85

120

DN25

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 14

180 212

70

85

120

DN25

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

MULTI-V 100 ELECTRICAL DATA AND DIMENSIONS - 2 POLE • PN 16 - DN G1 • PN 25 - DN 25 • PN 25 - «VICTAULIC» UNION 1”1/4

Draining

Venting and filling

Venting and filling

Draining Draining

Venting and filling

Terminal

BoxDelivered with counterflanges, seals and nuts

28

MULTI-V

MULTI-V 100 ELECTRICAL DATA AND DIMENSIONS - 2 POLE ORDER REFERENCE P2 Pmax Motor

housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V

H H2 M X Mass(with

packaging)kW (A) (A) (A) mm mm mm mm kg

3~ (2 poles)MULTI-V102-OSE-T/2/6 0,37 16 71 FT85 1,52 0,88 0,8 527,5 305 140 118 23,3MULTI-V103-OSE-T/2/6 0,55 16 71 FT85 2,2 1,27 1,25 527,5 305 140 118 24MULTI-V104-OSE-T/2/6 0,75 16 80 FT100 3 1,73 1,7 558,5 315 170 127 27MULTI-V105-OSE-T/2/6 1,1 16 80 FT100 4,2 2,4 2,2 578,5 335 170 127 28,8MULTI-V106-OSE-T/2/6 1,1 16 80 FT100 4,2 2,4 2,2 598,5 355 170 127 29,5MULTI-V107-OSE-T/2/6 1,5 16 90 FT115 5,4 3,2 2,8 651,5 385 193 151 34,5MULTI-V108-OSE-T/2/6 1,5 16 90 FT115 5,4 3,2 2,8 691,5 425 193 151 35,7MULTI-V109-OSE-T/2/6 1,85 16 90 FT115 6,56 3,79 3,52 691,5 425 193 151 37,8MULTI-V110-OSE-T/2/6 1,85 16 90 FT115 6,56 3,79 3,52 711,5 445 193 151 39,9MULTI-V102-FSE-T/2/6 0,37 25 71 FT85 1,52 0,88 0,8 552,5 330 140 118 24,4MULTI-V103-FSE-T/2/6 0,55 25 71 FT85 2,2 1,27 1,25 552,5 330 140 118 25,1MULTI-V104-FSE-T/2/6 0,75 25 80 FT100 3 1,73 1,7 583,5 340 170 127 28,1MULTI-V105-FSE-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 603,5 360 170 127 30MULTI-V106-FSE-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 623,5 380 170 127 30,7MULTI-V107-FSE-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 676,5 410 193 151 35,6MULTI-V108-FSE-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 716,5 450 193 151 39,4MULTI-V109-FSE-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 716,5 450 193 151 39,2MULTI-V110-FSE-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 736,5 470 193 151 41MULTI-V112-FSE-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 776,5 510 193 151 45,1MULTI-V114-FSE-T/2/6 3 25 100 FT130 10,2 6,3 5,4 805 510 217 160 61,3MULTI-V116-FSE-T/2/6 3 25 100 FT130 10,2 6,3 5,4 855 560 217 160 62,7MULTI-V102-FXV-T/2/6 0,37 25 71 FT85 1,52 0,88 0,8 552,5 330 140 118 24,4MULTI-V103-FXV-T/2/6 0,55 25 71 FT85 2,2 1,27 1,25 552,5 330 140 118 25,1MULTI-V104-FXV-T/2/6 0,75 25 80 FT100 3 1,73 1,63 583,5 329,5 170 127 28,1MULTI-V105-FXV-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 603,5 369,5 170 127 30MULTI-V106-FXV-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 623,5 380 170 127 30,7MULTI-V107-FXV-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 676,5 399,5 193 151 35,6MULTI-V108-FXV-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 716,5 439,5 193 151 39,4MULTI-V109-FXV-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 716,5 439,5 193 151 39,2MULTI-V110-FXV-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 736,5 459,5 193 151 41MULTI-V112-FXV-T/2/6 2,2 25 90 FT115 7,88 4,55 4 776,5 499,5 193 151 45,1MULTI-V114-FXV-T/2/6 3 25 100 FT130 10,2 5,9 5,4 805 549,5 217 160 61,3MULTI-V116-FXV-T/2/6 3 25 100 FT130 10,2 5,9 5,4 855 589,5 217 160 62,7

29

MULTI-V

Vidange

Purge


CBOV Ø G1 (PN16)

212180

X

100 4 Ø 12

2 Ø 12

RpG1

75

100 204

160

157 20

50

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

Purge


CBOV Ø G1 (PN16)

212180

X

100 4 Ø 12

2 Ø 12

RpG1

75

100 204

160

157 20

50

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 14

180 212

70

85

120

DN25

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 14

180 212

70

85

120

DN25

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

MULTI-V 200 ELECTRICAL DATA AND DIMENSIONS - 2 POLE • PN 16 - DN G1 • PN 25 - DN 25 • PN 25 - «VICTAULIC» UNION 1”1/4

on demand

Draining

Venting and filling

Venting and filling

Draining Draining

Venting and filling

TerminalBoxDelivered with

counterflanges, seals and nuts

30

MULTI-V

MULTI-V 200 ELECTRICAL DATA AND DIMENSIONS - 2 POLE

ORDER REFERENCE P2 Pmax Motor housing

Motor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V

H H2 M X Mass (with packaging)

kW (A) (A) (A) mm mm mm mm kg1~ (2 poles)MULTI-V202-OSE-M/2/6 0,55 16 71 FT85 3,6 519 296,5 140 107 21,8MULTI-V203-OSE-M/2/6 0,75 16 80 FT100 5,5 521,5 306,5 162 121 24MULTI-V204-OSE-M/2/6 1,1 16 80 FT100 7 545,5 330,5 162 121 26,3MULTI-V205-OSE-M/2/6 1,5 16 90 FT115 9,5 609,5 364,5 182 131 37,7MULTI-V202-FSE-M/2/6 0,55 25 71 FT85 3,6 544 321,5 140 107 23,1MULTI-V203-FSE-M/2/6 0,75 25 80 FT100 5,5 546,5 331,5 162 121 25,3MULTI-V204-FSE-M/2/6 1,1 25 80 FT100 7 570,5 355,5 162 121 27,6MULTI-V205-FSE-M/2/6 1,5 25 90 FT115 9,5 634,5 389,5 182 131 39MULTI-V202-FXV-M/2/6 0,55 25 71 FT85 3,6 544 321,5 140 107 23,1MULTI-V203-FXV-M/2/6 0,75 25 80 FT100 5,5 546,5 331,5 162 121 25,3MULTI-V204-FXV-M/2/6 1,1 25 80 FT100 7 570,5 355,5 162 121 27,6MULTI-V205-FXV-M/2/6 1,5 25 90 FT115 9,5 634,5 389,5 182 131 393~ (2 poles)MULTI-V202-OSE-T/2/6 0,55 16 71 FT85 2,2 1,27 1,25 481,5 296,5 140 118 20,9MULTI-V203-OSE-T/2/6 0,75 16 80 FT100 3 1,8 1,7 550 306,5 170 127 23,9MULTI-V204-OSE-T/2/6 1,1 16 80 FT100 4,2 2,4 2,2 574 330,5 170 127 25,7MULTI-V205-OSE-T/2/6 1,5 16 90 FT115 5,4 3,2 2,8 631 364,5 193 151 33,4MULTI-V206-OSE-T/2/6 1,85 16 90 FT115 6,56 3,79 3,52 655 388,5 193 151 34,8MULTI-V207-OSE-T/2/6 2,2 16 90 FT115 7,88 4,55 4,3 679 412,5 193 151 37,4MULTI-V208-OSE-T/2/6 2,2 16 90 FT115 7,88 4,55 4,3 703 436,5 193 151 38MULTI-V202-FSE-T/2/6 0,55 25 71 FT85 2,2 1,27 1,25 506,5 321,5 140 118 22,2MULTI-V203-FSE-T/2/6 0,75 25 80 FT100 3 1,8 1,7 575 331,5 170 127 25,2MULTI-V204-FSE-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 599 355,5 170 127 27MULTI-V205-FSE-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 656 389,5 193 151 34,7MULTI-V206-FSE-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 680 413,5 193 151 36,1MULTI-V207-FSE-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 704 437,5 193 151 38,7MULTI-V208-FSE-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 728 461,5 193 151 39,3MULTI-V210-FSE-T/2/6 3 25 100 FT130 10,2 5,9 5,4 814,5 519,5 217 160 47,7MULTI-V212-FSE-T/2/6 3,7 25 100 FT130 12,5 7,2 6,9 862,5 567,5 217 160 58,5MULTI-V214-FSE-T/2/6 3,7 25 100 FT130 12,5 7,2 6,9 910,5 615,5 217 160 59,8MULTI-V202-FXV-T/2/6 0,55 25 71 FT85 2,2 1,27 1,25 506,5 321,5 140 118 22,2MULTI-V203-FXV-T/2/6 0,75 25 80 FT100 3 1,8 1,7 575 331,5 170 127 25,2MULTI-V204-FXV-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 599 355,5 170 127 27MULTI-V205-FXV-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 656 389,5 193 151 34,7MULTI-V206-FXV-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 680 413,5 193 151 36,1MULTI-V207-FXV-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 704 437,5 193 151 38,7MULTI-V208-FXV-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 728 461,5 193 151 39,3MULTI-V210-FXV-T/2/6 3 25 100 FT130 10,2 5,9 5,4 814,5 519,5 217 160 47,7MULTI-V212-FXV-T/2/6 3,7 25 100 FT130 12,5 7,2 6,9 862,5 567,5 217 160 58,5MULTI-V214-FXV-T/2/6 3,7 25 100 FT130 12,5 7,2 6,9 910,5 615,5 217 160 59,8MULTI-V211-FSE-T/2/6 3 25 100 FT130 10,2 5,9 5,4 862,5 567,5 217 160 49,5MULTI-V211-FXV-T/2/6 3 25 100 FT130 10,2 5,9 5,4 862,5 567,5 217 160 49,5

31

MULTI-V

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 18

180 212

78

100

140

DN32

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 18

180 212

78

100

140

DN32

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 18

180 212

78

100

140

DN32

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

75

20 171,6

250

X

100 4 Ø 12

4 Ø 18

180 212

78

100

140

DN32

Vidange

Purge


CBOV Ø G11/4 (PN16)

212180

X

100 4 Ø 12

2 Ø 12

RpG11/4

75

100 204

160

157 20

50

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

Purge



212180

X

100 4 Ø 12

2 Ø 12

RpG11/4

75

100 204

160

157 20

50

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

212180

X

100 4 Ø 12

Ø M

h2

H

50

20 171,6

210

Ø 42,4

• PN 16 - DN 32

Draining

Venting and filling



• PN 16 - DN G11/4 • PN 25 - DN 32 • PN 25 - «VICTAULIC» Union1”1/4

DrainingDrainingDraining

Venting and filling

Venting and filling

Venting and filling

Terminal

BoxDelivered with counterflan-ges, seals and nuts

32

MULTI-V



Order reference P2 Pmax Motor housing

Motor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg1~ (2 poles)MULTI-V402-OSE-M/2/6 0,75 16 80 FT100 5,5 511,5 296,5 162 121 23,2MULTI-V403-OSE-M/2/6 1,1 16 80 FT100 7 521,5 306,5 162 121 25,7MULTI-V404-OSE-M/2/6 1,5 16 90 FT115 9,5 585,5 340,5 182 131 34,6MULTI-V402-FSE-M/2/6 0,75 25 80 FT100 5,5 536,5 321,5 162 121 24,5MULTI-V403-FSE-M/2/6 1,1 25 80 FT100 7 546,5 331,5 162 121 27MULTI-V404-FSE-M/2/6 1,5 25 90 FT115 9,5 610,5 365,5 182 131 38,4MULTI-V402-FXV-M/2/6 0,75 25 80 FT100 5,5 536,5 321,5 162 121 24,5MULTI-V403-FXV-M/2/6 1,1 25 80 FT100 7 546,5 331,5 162 121 27MULTI-V404-FXV-M/2/6 1,5 25 90 FT115 9,5 610,5 365,5 182 131 38,4

3~ (2 poles)MULTI-V402-OSE-T/2/6 0,75 16 80 FT100 3 1,8 1,7 540 296,5 170 127 23,1MULTI-V403-OSE-T/2/6 1,1 16 80 FT100 4,2 2,4 2,2 550 306,5 170 127 25,1MULTI-V404-OSE-T/2/6 1,5 16 90 FT115 5,4 3,2 2,8 607 340,5 193 151 32,8MULTI-V405-OSE-T/2/6 1,85 16 90 FT115 6,56 3,79 3,52 631 364,5 193 151 34,2MULTI-V406-OSE-T/2/6 2,2 16 90 FT115 7,88 4,55 4,3 655 388,5 193 151 36,8MULTI-V407-OSE-T/2/6 3 16 100 FT130 10,2 5,9 5,4 717,5 422,5 217 160 42,1MULTI-V408-OSE-T/2/6 3 16 100 FT130 10,2 5,9 5,4 741,5 446,5 217 160 42,7MULTI-V402-FSE-T/2/6 0,75 25 80 FT100 3 1,8 1,7 565 321,5 170 127 24,4MULTI-V403-FSE-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 575 331,5 170 127 26,4MULTI-V404-FSE-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 632 365,5 193 151 34,1MULTI-V405-FSE-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 656 389,5 193 151 35,5MULTI-V406-FSE-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 680 413,5 193 151 38,1MULTI-V407-FSE-T/2/6 3 25 100 FT130 10,2 5,9 5,4 742,5 447,5 217 160 43,4MULTI-V408-FSE-T/2/6 3 25 100 FT130 10,2 5,9 5,4 766,5 471,5 217 160 44MULTI-V410-FSE-T/2/6 4 25 112 FT130 13,5 7,8 7,7 814,5 519,5 217 160 56,7MULTI-V412-FSE-T4/2/6 5,5 25 112 FT130 11,2 10,3 892,5 567,5 235 168 62,6MULTI-V412N-FSE-T4/2/6 5,5 25 132 FF265 11,7 10,3 945 587 265 179 72,2MULTI-V414-FSE-T4/2/6 5,5 25 112 FT130 11,2 10,3 940,5 615,5 235 168 63,8MULTI-V414N-FSE-T4/2/6 5,5 25 132 FF265 11,7 10,3 993 635 265 179 74MULTI-V402-FXV-T/2/6 0,75 25 80 FT100 3 1,8 1,7 565 321,5 170 127 24,4MULTI-V403-FXV-T/2/6 1,1 25 80 FT100 4,2 2,4 2,2 575 331,5 170 127 26,4MULTI-V404-FXV-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 632 365,5 193 151 34,1MULTI-V405-FXV-T/2/6 1,85 25 90 FT115 6,56 3,79 3,52 656 389,5 193 151 35,5MULTI-V406-FXV-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 680 413,5 193 151 38,1MULTI-V407-FXV-T/2/6 3 25 100 FT130 10,2 5,9 5,4 742,5 447,5 217 160 43,4MULTI-V408-FXV-T/2/6 3 25 100 FT130 10,2 5,9 5,4 766,5 471,5 217 160 44MULTI-V410-FXV-T/2/6 4 25 112 FT130 13,5 7,8 7,7 814,5 519,5 217 160 56,7MULTI-V412-FXV-T4/2/6 5,5 25 112 FT130 11,2 10,3 892,5 567,5 235 168 62,6MULTI-V412N-FXV-T4/2/6 5,5 25 132 FF265 11,7 10,3 945 587 265 179 72,2MULTI-V414-FXV-T4/2/6 5,5 25 112 FT130 11,2 10,3 940,5 615,5 235 168 63,8MULTI-V414N-FXV-T4/2/6 5,5 25 132 FF265 11,7 10,3 993 635 265 179 74MULTI-V411-FSE-T/2/6 4 25 112 FT130 13,5 7,8 7,7 862,5 567,5 217 160 58,6MULTI-V411-FXV-T/2/6 4 25 112 FT130 13,5 7,8 7,7 862,5 567,5 217 160 58,6

Order reference P2 Pmax Motor housing

Motor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg 3~ (4 poles)MULTI-V410-FSE-T/4/6 0,55 16 80 FT100 2,29 1,32 1,42 743,5 499,5 170 127 33MULTI-V414-FSE-T/4/6 0,75 16 80 FT100 3,4 1,96 1,8 839,5 595,5 170 133 39,6MULTI-V420-FSE-T/4/6 1,1 16 90 FT115 4,32 2,5 2,2 1016,5 749,5 193 151 47,5MULTI-V410-FXV-T/4/6 0,55 16 80 FT100 2,29 1,32 1,42 743,5 499,5 170 127 33MULTI-V414-FXV-T/4/6 0,75 16 80 FT100 3,4 1,96 1,8 839,5 595,5 170 133 39,6MULTI-V420-FXV-T/4/6 1,1 16 90 FT115 4,32 2,5 2,2 1016,5 749,5 193 151 47,5

33

MULTI-V

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

80

20 187

280

X

130 4 Ø 12

4 Ø 18

215 252

88

110

150

DN40

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

80

20 187

280

X

130 4 Ø 12

4 Ø 18

215 252

88

110

150

DN40

Vidange

Purge



252215

X

130 4 Ø 12

2 Ø 12

RpG11/2

100

130 250

200

187 20

80

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

Purge



252215

X

130 4 Ø 12

2 Ø 12

RpG11/2

100

130 250

200

187 20

80

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

252215

X

130 4 Ø 12

Ø M

h2

H

80

20 187

261

Ø 60,3

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

252215

X

130 4 Ø 12

Ø M

h2

H

80

20 187

261

Ø 60,3

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

80

20 187

280

X

130 4 Ø 12

4 Ø 18

215 252

88

110

150

DN40

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

80

20 187

280

X

130 4 Ø 12

4 Ø 18

215 252

88

110

150

DN40

• PN 16 - DN 40

Draining

Venting and filling



• PN 16 - DN G11/2 • PN 25 - DN 40 • PN 25 - «VICTAULIC» Union 2”

Draining

Venting and filling

Venting and filling

Venting and filling

Draining Draining


counterflanges, seals and nuts

34

MULTI-V

MULTI-V 800 ELECTRICAL DATA AND DIMENSIONS - 2 POLE P2 Pmax Motor

housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg1~ (2 poles)MULTI-V802-OSE-M/2/6 1,5 16 90 FT115 9,5 588,5 343,5 182 131 36,1MULTI-V802-FSE-M/2/6 1,5 25 90 FT115 9,5 588,5 343,5 182 131 36,4MULTI-V802-FXV-M/2/6 1,5 25 90 FT115 9,5 588,5 343,5 182 131 36,4

3~ (2 poles)MULTI-V802-OSE-T/2/6 1,5 16 90 FT115 5,4 3,2 2,8 610 343,5 193 151 34,3MULTI-V803-OSE-T/2/6 2,2 16 90 FT115 7,88 4,55 4,3 640 373,5 193 151 37,8MULTI-V804-OSE-T/2/6 3 16 100 FT130 10,2 5,9 5,4 708,5 413,5 217 160 43,2MULTI-V805-OSE-T/2/6 3,7 16 100 FT130 12,5 7,2 6,9 738,5 443,5 217 160 52,9MULTI-V806-OSE-T/2/6 4 16 112 FT130 13,5 7,8 7,7 768,5 473,5 217 160 56,1MULTI-V807-OSE-T4/2/6 5,5 16 112 FT130 11,2 10,3 828,5 503,5 235 168 60,9MULTI-V807N-OSE-T4/2/6 5,5 16 132 FF265 11,7 10,3 881 523 265 179 70,4MULTI-V808-OSE-T4/2/6 5,5 16 112 FT130 11,2 10,3 858,5 533,5 235 168 61,6MULTI-V808N-OSE-T4/2/6 5,5 16 132 FF265 11,7 10,3 911 553 265 179 71,1MULTI-V802-FSE-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 610 343,5 193 151 34,6MULTI-V803-FSE-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 640 373,5 193 151 38,2MULTI-V804-FSE-T/2/6 3 25 100 FT130 10,2 5,9 5,4 708,5 413,5 217 160 43,5MULTI-V805-FSE-T/2/6 3,7 25 100 FT130 12,5 7,2 6,9 738,5 443,5 217 160 53,2MULTI-V806-FSE-T/2/6 4 25 112 FT130 13,5 7,8 7,7 768,5 473,5 217 160 56,5MULTI-V807-FSE-T4/2/6 5,5 25 112 FT130 11,2 10,3 828,5 503,5 235 168 61,2MULTI-V807N-FSE-T4/2/6 5,5 25 132 FF265 11,7 10,3 881 523 265 179 70,7MULTI-V808-FSE-T4/2/6 5,5 25 112 FT130 11,2 10,3 858,5 533,5 235 168 61,9MULTI-V808N-FSE-T4/2/6 5,5 25 132 FF265 11,7 10,3 911 553 265 179 71,5MULTI-V810-FSE-T4/2/6 7,5 25 132 FF265 15 13,5 1009 613 265 179 84,7MULTI-V811-FSE-T4/2/6 7,5 25 132 FF265 15 13,5 1069 673 265 179 86,1MULTI-V802-FXV-T/2/6 1,5 25 90 FT115 5,4 3,2 2,8 610 343,5 193 151 34,6MULTI-V803-FXV-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 640 373,5 193 151 38,2MULTI-V804-FXV-T/2/6 3 25 100 FT130 10,2 5,9 5,4 708,5 413,5 217 160 43,5MULTI-V805-FXV-T/2/6 3,7 25 100 FT130 12,5 7,2 6,9 738,5 443,5 217 160 53,2MULTI-V806-FXV-T/2/6 4 25 112 FT130 13,5 7,8 7,7 768,5 473,5 217 160 56,5MULTI-V807-FXV-T4/2/6 5,5 25 112 FT130 11,2 10,3 828,5 503,5 235 168 61,2MULTI-V807N-FXV-T4/2/6 5,5 25 132 FF265 11,7 10,3 881 523 265 179 70,7MULTI-V808-FXV-T4/2/6 5,5 25 112 FT130 11,2 10,3 858,5 533,5 235 168 61,9MULTI-V808N-FXV-T4/2/6 5,5 25 132 FF265 11,7 10,3 911 553 265 179 71,5MULTI-V810-FXV-T4/2/6 7,5 25 132 FF265 15 13,5 1009 613 265 179 84,7MULTI-V811-FXV-T4/2/6 7,5 25 132 FF265 15 13,5 1069 673 265 179 86,1

MULTI-V 800 ELECTRICAL DATA AND DIMENSIONS - 4 POLE P2 Pmax Motor

housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (4 poles)MULTI-V810-FSE-T/4/6 1,1 16 90 FT115 4,32 2,5 2,2 850,5 583,5 193 151 42,7MULTI-V814-FSE-T/4/6 1,5 16 90 FT115 5,4 3,2 2,8 970,5 703,5 193 151 48,4MULTI-V819-FSE-T/4/6 1,5 16 90 FT115 5,4 3,2 2,8 1120,5 853,5 193 151 56,3MULTI-V810-FXV-T/4/6 1,1 16 90 FT115 4,32 2,5 2,2 850,5 583,5 193 151 42,7MULTI-V814-FXV-T/4/6 1,5 16 90 FT115 5,4 3,2 2,8 970,5 703,5 193 151 48,4MULTI-V819-FXV-T/4/6 1,5 16 90 FT115 5,4 3,2 2,8 1120,5 853,5 193 151 56,3

35

MULTI-V

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

90

20 187

300

X

130 4 Ø 12

4 Ø 18

215 252

99

125

165

DN50

Vidange

Purge


CBOV Ø G2 (PN16)

252215

X

130 4 Ø 12

2 Ø 12

RpG2

100

130 250

200

187 20

90

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

Purge


CBOV Ø G2 (PN16)

252215

X

130 4 Ø 12

2 Ø 12

RpG2

100

130 250

200

187 20

90

h

HØ G 3/8

Ø G 3/8

Ø M

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

90

20 187

300

X

130 4 Ø 12

4 Ø 18

215 252

99

125

165

DN50

Vidange

PurgeØ G 3/8

Ø G 3/8

Ø M

H

h

90

20 187

300

X

130 4 Ø 12

4 Ø 18

215 252

99

125

165

DN50

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

252215

X

130 4 Ø 12

Ø M

h2

H

90

20 187

261

Ø 60,3

Vidange

Purge

Ø G 3/8

Boîte

à bornes

Ø G 3/8

252215

X

130 4 Ø 12

Ø M

h2

H

90

20 187

261

Ø 60,3

• PN 16 - DN 50

Draining

Venting and filling



• PN 16 - DN G2 • PN 25 - DN 50 • PN 25 - «VICTAULIC» union 2”On demand

Draining

Venting and filling

Venting and filling

Venting and filling

Draining Draining


counterflan-ges, seals and nuts

36

MULTI-V

MULTI-V 1600 ELECTRICAL DATA AND DIMENSIONS - 2 POLE Order reference P2 Pmax Motor

housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (2 poles)MULTI-V1602-OSE-T/2/6 2,2 16 90 FT115 7,88 4,55 4,3 636 369,5 193 151 36,7MULTI-V1603-OSE-T/2/6 3,7 16 100 FT130 12,5 7,2 6,9 712,5 417,5 217 160 54,1MULTI-V1604-OSE-T4/2/6 5,5 16 112 FT130 11,2 10,3 780,5 455,5 235 168 61,8MULTI-V1604N-OSE-T4/2/6 5,5 16 132 FF265 11,7 10,3 833 475 265 179 69,8MULTI-V1605-OSE-T4/2/6 5,5 16 112 FT130 11,2 10,3 818,5 493,5 235 168 63MULTI-V1605N-OSE-T4/2/6 5,5 16 132 FF265 11,7 10,3 871 513 265 179 71MULTI-V1606-OSE-T4/2/6 7,5 16 132 FF265 15 13,5 947 551 265 179 83,2MULTI-V1602-FSE-T/2/6 2,2 25 90 FT115 7,88 4,55 4,3 663 396,5 193 151 36,7MULTI-V1603-FSE-T/2/6 3,7 25 100 FT130 12,5 7,2 6,9 712,5 417,5 217 160 54,1MULTI-V1604-FSE-T4/2/6 5,5 25 112 FT130 11,2 10,3 780,5 455,5 235 168 61,8MULTI-V1604N-FSE-T4/2/6 5,5 25 132 FF265 11,7 10,3 833 475 265 179 69,8MULTI-V1605-FSE-T4/2/6 5,5 25 112 FT130 11,2 10,3 818,5 493,5 235 168 63MULTI-V1605N-FSE-T4/2/6 5,5 25 132 FF265 11,7 10,3 871 513 265 179 71MULTI-V1606-FSE-T4/2/6 7,5 25 132 FF265 15 13,5 947 551 265 179 83,2


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (4 poles)MULTI-V1605-FSE-T/4/6 0,75 16 80 FT100 3,4 1,96 1,8 752,5 508,5 170 133 37,1MULTI-V1608-FSE-T/4/6 1,1 16 90 FT115 4,32 2,5 2,2 860,5 593,5 193 151 45,9MULTI-V1610-FSE-T/4/6 1,5 16 90 FT115 5,4 3,2 2,8 935,5 668,5 193 151 53,8MULTI-V1612-FSE-T/4/6 2,2 16 100 FT130 8,12 4,7 4,2 1045,5 753,5 217 161 61

37

MULTI-V

4 x ø18125

20102

252

H

h2

65 Ø

ø

X

orifice de purge

orifice de vidange

90

194300

4 x ø14

215

130

position boîte à bornes

ø M4 x ø18125

20102

252

H

h2

Ø65

ø

X

orifice de purge

orifice de vidange

90

194300

4 x ø14

215

130


ø M

DN 50

4 x ø18125

20102

252

H

h2

65 Ø

ø

X

orifice de purge

orifice de vidange

90

194300

4 x ø14

215

130


ø M4 x ø18125

20102

252

H

h2

Ø65

ø

X

orifice de purge

orifice de vidange

90

194300

4 x ø14

215

130


ø M

DN 50

4 x ø18125

20102

252

H

h2

65 Ø

ø

X

orifice de purge

orifice de vidange

90194300

4 x ø14

215

130


ø M4 x ø18125

20102

252

H

h2

Ø65

ø

X

orifice de purge

orifice de vidange

90194300

4 x ø14

215

130


ø M

DN 50

MULTI-V 1800 ELECTRICAL DATA AND DIMENSIONS - 2 AND 4 POLE • PN 16 and 25 - 2 and 4 Pole - DN 50

Venting and filling plug Terminal box position

Draining plug


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (2 poles)MULTI-V1802-FGE-T/2/6 3,7 25 100 FT130 7,2 7,3 724 429 217 160 87MULTI-V1803-FGE-T4/2/6 5,5 25 112 FT130 11,2 10,2 754 429 235 168 91,3MULTI-V1803N-FGE-T4/2/6 5,5 25 132 FF265 11,7 10,2 807 449 265 179 100,7MULTI-V1804-FGE-T4/2/6 7,5 25 132 FF265 15 13,9 878,5 483,5 265 179 113,3MULTI-V1805-FGE-T4/2/6 9 25 132 FF265 16,9 15,9 917 518 300 179 130,3MULTI-V1805N-FGE-T4/2/6 11 25 160 FF300 21,2 19,9 1024 548 325 208 151,3MULTI-V1806-FGE-T4/2/6 11 25 132 FF265 20,4 19,9 951,5 552,5 300 179 132,3MULTI-V1806N-FGE-T4/2/6 11 25 160 FF300 21,2 19,9 1058,5 582,5 325 208 153,3MULTI-V1807-FGE-T4/2/6 15 25 160 FF300 28 25,7 1127,5 651,5 325 208 167MULTI-V1808-FGE-T4/2/6 15 25 160 FF300 28 25,7 1127,5 651,5 325 208 167,7MULTI-V1809-FGE-T4/2/6 18,5 25 160 FF300 35 32,2 1215,5 720,5 325 235 186,4MULTI-V1802-OGE-T/2/6 3,7 16 100 FT130 7,2 7,3 724 429 217 160 87MULTI-V1803-OGE-T4/2/6 5,5 16 112 FT130 11,2 10,2 754 429 235 168 91,3MULTI-V1803N-OGE-T4/2/6 5,5 16 132 FF265 11,7 10,2 807 449 265 179 100,7MULTI-V1804-OGE-T4/2/6 7,5 16 132 FF265 15 13,9 878,5 483,5 265 179 113,3MULTI-V1805-OGE-T4/2/6 9 16 132 FF265 16,9 15,9 917 518 300 179 130,3MULTI-V1805N-OGE-T4/2/6 11 16 160 FF300 21,2 19,9 1024 548 325 208 151,3MULTI-V1806-OGE-T4/2/6 11 16 132 FF265 20,4 19,9 951,5 552,5 300 179 132,3MULTI-V1806N-OGE-T4/2/6 11 16 160 FF300 21,2 19,9 1058,5 582,5 325 208 153,3MULTI-V1802-OXV-T/2/6 3,7 16 100 FT130 7,2 7,3 724 429 217 160 87MULTI-V1803-OXV-T4/2/6 5,5 16 112 FT130 11,2 10,2 754 429 235 168 91,3MULTI-V1803N-OXV-T4/2/6 5,5 16 132 FF265 11,7 10,2 807 449 265 179 100,7MULTI-V1804-OXV-T4/2/6 7,5 16 132 FF265 15 13,9 878,5 483,5 265 179 113,3MULTI-V1805-OXV-T4/2/6 9 16 132 FF265 16,9 15,9 917 518 300 179 130,3MULTI-V1805N-OXV-T4/2/6 11 16 160 FF300 21,2 19,9 1024 548 325 208 151,3MULTI-V1806-OXV-T4/2/6 11 16 132 FF265 20,4 19,9 951,5 552,5 300 179 132,3MULTI-V1806N-OXV-T4/2/6 11 16 160 FF300 21,2 19,9 1058,5 582,5 325 208 153,3MULTI-V1802-FXV-T/2/6 3,7 25 100 FT130 7,2 7,3 724 429 217 160 87MULTI-V1803-FXV-T4/2/6 5,5 25 112 FT130 11,2 10,2 754 429 235 168 91,3MULTI-V1803N-FXV-T4/2/6 5,5 25 132 FF265 11,7 10,2 807 449 265 179 100,7MULTI-V1804-FXV-T4/2/6 7,5 25 132 FF265 15 13,9 878,5 483,5 265 179 113,3MULTI-V1805-FXV-T4/2/6 9 25 132 FF265 16,9 15,9 917 518 300 179 130,3MULTI-V1805N-FXV-T4/2/6 11 25 160 FF300 21,2 19,9 1024 548 325 208 151,3MULTI-V1806-FXV-T4/2/6 11 25 132 FF265 20,4 19,9 951,5 552,5 300 179 132,3MULTI-V1806N-FXV-T4/2/6 11 25 160 FF300 21,2 19,9 1058,5 582,5 325 208 153,3MULTI-V1807-FXV-T4/2/6 15 25 160 FF300 28 25,7 1127,5 651,5 325 208 167MULTI-V1808-FXV-T4/2/6 15 25 160 FF300 28 25,7 1127,5 651,5 325 208 167,7MULTI-V1809-FXV-T4/2/6 18,5 25 160 FF300 35 32,2 1215,5 720,5 325 235 186,4


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (4 poles)MULTI-V1807-OGE-T/4/6 1,5 16 90 FT115 5,4 3,2 2,8 858,5 591,5 193 151 81MULTI-V1810-OGE-T/4/6 2,2 16 100 FT130 8,12 4,7 4,2 962,5 670,5 217 161 98,3MULTI-V1812-OGE-T/4/6 3 16 100 FT130 10,7 6,2 5,7 1031,5 739,5 217 161 105,7MULTI-V1814-OGE-T/4/6 4 16 112 FT130 14,4 8,3 7,6 1213,5 877,5 232 168 123,7MULTI-V1807-OXV-T/4/6 1,5 16 90 FT115 5,4 3,2 2,8 858,5 591,5 193 151 81MULTI-V1810-OXV-T/4/6 2,2 16 100 FT130 8,12 4,7 4,2 962,5 670,5 217 161 98,3MULTI-V1812-OXV-T/4/6 3 16 100 FT130 10,7 6,2 5,7 1031,5 739,5 217 161 105,7MULTI-V1814-OXV-T/4/6 4 16 112 FT130 14,4 8,3 7,6 1213,5 877,5 232 168 123,7

38

MULTI-V

4 x ø18 ø145

235

h2

H

35

80 ø 125

Orifice de purge

Orifice de vidange

239 320

105

X


Ø M

195 4 x ø14

195 DN 65

4 x ø18 ø145

235

h2

H

35

80 ø 125

Orifice de purge

Orifice de vidange

239 320

105

X


Ø M

195 4 x ø14

195 DN 65

4 x ø18 ø145

235

h2

H

35

80 ø 125

Orifice de purge

Orifice de vidange

239 320

105

X


Ø M

195 4 x ø14

195 DN 65

MULTI-V 3600 ELECTRICAL DATA AND DIMENSIONS - 2 AND 4 POLE • PN 16 - 2 and 4 Pole - DN 65

Venting and filling plug

Terminal box position

Draining plug


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (2 poles)MULTI-V3602-OGE-T4/2/6 7,5 16 132 FF265 15 13,9 887,7 492,7 265 179 122,5MULTI-V3603-OGE-T4/2/6 11 16 132 FF265 20,4 19,9 953 554 300 179 135,3MULTI-V3603N-OGE-T4/2/6 11 16 160 FF300 21,2 19,9 1060 584 325 208 161,7MULTI-V3604-OGE-T4/2/6 15 16 160 FF300 28 25,7 1121,3 645,3 325 208 171,9MULTI-V3605-OGE-T4/2/6 18,5 16 160 FF300 35 32,2 1263 768 325 235 195,2MULTI-V3602-OXV-T4/2/6 7,5 16 132 FF265 15 13,9 887,7 492,7 265 179 122,5MULTI-V3603-OXV-T4/2/6 11 16 132 FF265 20,4 19,9 953 554 300 179 140,7MULTI-V3603N-OXV-T4/2/6 11 16 160 FF300 21,2 19,9 1060 584 325 208 161,7MULTI-V3604-OXV-T4/2/6 15 16 160 FF300 28 25,7 1121,3 645,3 325 208 171,9MULTI-V3605-OXV-T4/2/6 18,5 16 160 FF300 35 32,2 1263 768 325 235 195,2


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (4 poles)MULTI-V3606-OGE-T/4/6 2,2 16 100 FT130 8,12 4,7 4,2 916 624 217 161 100,8MULTI-V3608-OGE-T/4/6 3 16 100 FT130 10,7 6,2 5,7 1008 716 217 161 108,8MULTI-V3610-OGE-T/4/6 4 16 112 FT130 14,4 8,3 7,6 1236 900 232 168 130,4MULTI-V3612-OGE-T4/4/6 5,5 16 132 FF265 11,1 9,8 1316 920 279 179 147,4MULTI-V3606-OXV-T/4/6 2,2 16 100 FT130 8,12 4,7 4,2 916 624 217 161 100,8MULTI-V3608-OXV-T/4/6 3 16 100 FT130 10,7 6,2 5,7 1008 716 217 161 108,8MULTI-V3610-OXV-T/4/6 4 16 112 FT130 14,4 8,3 7,6 1236 900 232 168 130,4MULTI-V3612-OXV-T4/4/6 5,5 16 132 FF265 11,1 9,8 1316 920 279 179 147,4MULTI-V3614-OGE-T4/4/6 5,5 16 132 FF265 11,1 9,8 1408 1012 279 179 152,4MULTI-V3616-OGE-T4/4/6 7,5 16 132 FF265 15 13,5 1500 1104 280 179 178,4MULTI-V3614-OXV-T4/4/6 5,5 16 132 FF265 11,1 9,8 1408 1012 279 179 152,4MULTI-V3616-OXV-T4/4/6 7,5 16 132 FF265 15 13,5 1500 1104 280 179 178,4

39

MULTI-V

8 x ø18ø145

35

125

260

ø 80

h2

H


Ø M

220

4 x ø14

220

Orificede purge

Orifice de vidange

262

320

120

X

8 x ø18ø145

35

125

260

ø 80

h2

H


Ø M

220

4 x ø14

220

Orificede purge

Orifice de vidange

262

320

120

X

DN 65

MULTI-V 3600 ELECTRICAL DATA AND DIMENSIONS - 2 POLE • PN 25 - 2 Pole - DN 65



Draining plug


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (2 poles)MULTI-V3602-FGE-T4/2/6 7,5 25 132 FF265 15 13,9 870 475 265 179 121,8MULTI-V3603-FGE-T4/2/6 11 25 132 FF265 20,4 19,9 920 521 300 179 139,3MULTI-V3603N-FGE-T4/2/6 11 25 160 FF300 21,2 19,9 1027 551 325 208 160,3MULTI-V3604-FGE-T4/2/6 15 25 160 FF300 28 25,7 1073 597 325 208 169,8MULTI-V3605-FGE-T4/2/6 18,5 25 160 FF300 35 32,2 1184 689 325 235 192,3MULTI-V3606-FGE-T4/2/6 22 25 180 FF300 41 37,7 1208 689 370 248 216,8MULTI-V3607-FGE-T4/2/6 22 25 180 FF300 41 37,7 1346 827 370 248 223,3MULTI-V3602-FXV-T4/2/6 7,5 25 132 FF265 15 13,9 870 475 265 179 121,8MULTI-V3603-FXV-T4/2/6 11 25 132 FF265 20,4 19,9 920 521 300 179 139,3MULTI-V3603N-FXV-T4/2/6 11 25 160 FF300 21,2 19,9 1027 551 325 208 160,3MULTI-V3604-FXV-T4/2/6 15 25 160 FF300 28 25,7 1073 597 325 208 169,8MULTI-V3605-FXV-T4/2/6 18,5 25 160 FF300 35 32,2 1184 689 325 235 192,3MULTI-V3606-FXV-T4/2/6 22 25 180 FF300 41 37,7 1208 689 370 248 216,8MULTI-V3608C-FGE-T4/2/6 30 25 200 FF350 60 1498 899 415 255 314,7MULTI-V3609C-FGE-T4/2/6 30 25 200 FF350 60 1544 945 415 255 317,8

40

MULTI-V

MULTI-V 6000 ELECTRICAL DATA AND DIMENSIONS - 2 AND 4 POLE • PN 16 and 25 - 2 and 4 Pole - DN 80

4 x ø14

220

220

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18ø160

30

ø80

260

h2

H


ØM

X

4 x ø14

220

220

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18 ø160

30

ø80

260

h2

H


Ø M

X

DN 80

4 x ø14

22022

0

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18ø160

30

ø80

260

h2

H


ØM

X

4 x ø14

220 22

0

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18 ø160

30

ø80

260

h2

H


Ø M

X

DN 80


4 x ø14

220

220

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18ø160

30

ø80

260

h2

H


ØM

X

4 x ø14

220

220

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18 ø160

30

ø80

260

h2

H


Ø M

X

DN 80

4 x ø14

220

220

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18ø160

30

ø80

260

h2

H


ØM

X

4 x ø14

220

220

orifice de purge

orifice de vidange

105

ø M

260

320

8 x ø18 ø160

30

ø80

260

h2

H


Ø M

X

DN 80


Draining plug


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (2 poles)MULTI-V6002-OGE-T4/2/6 9 16 132 FF265 16,9 15,9 891,7 492,7 300 179 137,5MULTI-V6002N-OGE-T4/2/6 11 16 160 FF300 21,2 19,9 998,7 522,7 325 208 158,5MULTI-V6003-OGE-T4/2/6 15 16 160 FF300 28 25,7 1060 584 325 208 168,7MULTI-V6004-OGE-T4/2/6 18,5 16 160 FF300 35 32,2 1140,3 645,3 325 235 189,9MULTI-V6005-OGE-T4/2/6 22 16 180 FF300 41 37,7 1287 768 370 248 219,2MULTI-V6002-FGE-T4/2/6 9 25 132 FF265 16,9 15,9 891,7 492,7 300 179 137,5MULTI-V6002N-FGE-T4/2/6 11 25 160 FF300 21,2 19,9 998,7 522,7 325 208 158,5MULTI-V6003-FGE-T4/2/6 15 25 160 FF300 28 25,7 1060 584 325 208 168,7MULTI-V6004-FGE-T4/2/6 18,5 25 160 FF300 35 32,2 1140,3 645,3 325 235 189,9MULTI-V6005-FGE-T4/2/6 22 25 180 FF300 41 37,7 1287 768 370 248 219,2MULTI-V6002-OXV-T4/2/6 9 16 132 FF265 16,9 15,9 891,7 492,7 300 179 137,5MULTI-V6002N-OXV-T4/2/6 11 16 160 FF300 21,2 19,9 998,7 522,7 325 208 158,5MULTI-V6003-OXV-T4/2/6 15 16 160 FF300 28 25,7 1060 584 325 208 168,7MULTI-V6004-OXV-T4/2/6 18,5 16 160 FF300 35 32,2 1140,3 645,3 325 235 189,9MULTI-V6005-OXV-T4/2/6 22 16 180 FF300 41 37,7 1287 768 370 248 219,2MULTI-V6002-FXV-T4/2/6 9 25 132 FF265 16,9 15,9 891,7 492,7 300 179 137,5MULTI-V6002N-FXV-T4/2/6 11 25 160 FF300 21,2 19,9 998,7 522,7 325 208 158,5MULTI-V6003-FXV-T4/2/6 15 25 160 FF300 28 25,7 1060 584 325 208 168,7MULTI-V6004-FXV-T4/2/6 18,5 25 160 FF300 35 32,2 1140,3 645,3 325 235 189,9MULTI-V6005-FXV-T4/2/6 22 25 180 FF300 41 37,7 1287 768 370 248 219,2MULTI-V6006C-FGE-T4/2/6 30 25 200 FF350 60 1485 886 415 255 314,4MULTI-V6007C-FGE-T4/2/6 30 25 200 FF350 60 1607,6 1008,6 415 255 319,7MULTI-V6008C-FGE-T4/2/6 37 25 200 FF350 74,7 1629,6 1008,6 415 275 339,7


housingMotor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg3~ (4 poles)MULTI-V6004-OGE-T/4/6 2,2 16 100 FT130 8,12 4,7 4,2 887,3 595,3 217 161 101,9MULTI-V6006-OGE-T/4/6 3 16 100 FT130 10,7 6,2 5,7 1010 718 217 161 111,3MULTI-V6008-OGE-T/4/6 4 16 112 FT130 14,4 8,3 7,6 1176,6 840,6 232 168 131MULTI-V6004-OXV-T/4/6 2,2 16 100 FT130 8,12 4,7 4,2 887,3 595,3 217 161 101,9MULTI-V6006-OXV-T/4/6 3 16 100 FT130 10,7 6,2 5,7 1010 718 217 161 111,3MULTI-V6008-OXV-T/4/6 4 16 112 FT130 14,4 8,3 7,6 1176,6 840,6 232 168 131MULTI-V6010-OGE-T4/4/6 5,5 16 132 FF265 11,1 9,8 1502 1106 279 179 157,6MULTI-V6012-OGE-T4/4/6 7,5 16 132 FF265 15 13,5 1502 1106 280 179 180,8MULTI-V6010-OXV-T4/4/6 5,5 16 132 FF265 11,1 9,8 1502 1106 279 179 157,6MULTI-V6012-OXV-T4/4/6 7,5 16 132 FF265 15 13,5 1502 1106 280 179 180,8

41

MULTI-V

orifice de purge

orifice de vidange

8xØ23 8xØ19

4xØ14

Ø190 Ø180

Ø100

h2 H

280

M

ASP. REF.

45

350

PN25

350

PN16

264

380

X

199

Positionboîte à bornes

DN 100

orifice de purge

orifice de vidange

8xØ23 8xØ19

4xØ14

Ø190 Ø180

Ø100

h2 H

280

M

ASP. REF.

45

350

PN25

350

PN16

264

380

X

199


DN 100

120 140




Draining plug


Motor flange

I Maxi A 220V

I Maxi A 380V


kW (A) (A) mm mm mm mm kg3~ (2 poles)MULTI-V8001/1-OGE-T4/2/6 7,5 16 132 FF265 15 920 559 279 182 145MULTI-V8001-OGE-T4/2/6 11 16 132 FF265 20,4 955 559 280 182 155MULTI-V8001N-OGE-T4/2/6 11 16 160 FF300 27,1 1148 559 325 208 180MULTI-V8002/2-OGE-T4/2/6 15 16 160 FF300 30 1233 757 325 208 191MULTI-V8002/1-OGE-T4/2/6 18,5 16 160 FF300 38,5 1252 757 325 235 206MULTI-V8002-OGE-T4/2/6 22 16 180 FF300 43,5 1276 757 370 249 229MULTI-V8003/2-OGE-T4/2/6 22 16 180 FF300 43,5 1276 842 370 249 232MULTI-V8003/1-OGE-T4/2/6 30 16 200 FF350 60 1441 842 415 255 279MULTI-V8003-OGE-T4/2/6 30 16 200 FF350 60 1441 842 415 255 279MULTI-V8004/2-OGE-T4/2/6 37 16 200 FF350 74,7 1548 927 415 275 333MULTI-V8004/1-OGE-T4/2/6 37 16 200 FF350 74,7 1548 927 415 275 333MULTI-V8004-OGE-T4/2/6 45 16 225 FF400 97 1639 927 456 275 363MULTI-V8001/1-FGE-T4/2/6 7,5 25 132 FF265 15 920 559 279 182 145MULTI-V8001-FGE-T4/2/6 11 25 132 FF265 20,4 955 672 280 182 155MULTI-V8001N-FGE-T4/2/6 11 25 160 FF300 27,1 1148 672 325 208 180MULTI-V8002/2-FGE-T4/2/6 15 25 160 FF300 30 1233 757 325 208 191MULTI-V8002/1-FGE-T4/2/6 18,5 25 160 FF300 38,5 1252 757 325 235 206MULTI-V8002-FGE-T4/2/6 22 25 180 FF300 43,5 1276 757 370 249 229MULTI-V8003/2-FGE-T4/2/6 22 25 180 FF300 43,5 1276 842 370 249 232MULTI-V8003/1-FGE-T4/2/6 30 25 200 FF350 60 1441 842 415 255 279MULTI-V8003-FGE-T4/2/6 30 25 200 FF350 60 1441 842 415 255 279MULTI-V8004/2-FGE-T4/2/6 37 25 200 FF350 74,7 1548 927 415 275 333MULTI-V8004/1-FGE-T4/2/6 37 25 200 FF350 74,7 1548 927 415 275 333MULTI-V8004-FGE-T4/2/6 45 25 225 FF400 97 1639 927 456 275 363MULTI-V8005/2-FGE-T4/2/6 45 25 225 FF400 97 1639 1012 456 275 367MULTI-V8005/1-FGE-T4/2/6 45 25 225 FF400 97 1639 1012 456 275 367

42

MULTI-V

orifice de purge

orifice de vidange

8xØ23 8xØ19

4xØ14

Ø190 Ø180

Ø100

h2 H

280

M

ASP. REF.

45

350

PN25

350

PN16

264

380

X

199


DN 100

orifice de purge

orifice de vidange

8xØ23 8xØ19

4xØ14

Ø190 Ø180

Ø100

h2 H

280

M

ASP. REF.

45

350

PN25

350

PN16

264

380

X

199


DN 10012

0 140

MULTI-V 100.00 ELECTRICAL DATA AND DIMENSIONS - 2 POLE



Draining plug


Motor flange

I Maxi A 220V

I Maxi A 380V

I Maxi A 440V


kW (A) (A) (A) mm mm mm mm kg

3~ (2 poles)

MULTI-V10001/1-OGE-T4/2/6 15 16 160 FF300 30 1161 685 325 208 187

MULTI-V10001-OGE-T4/2/6 18,5 16 160 FF300 38,5 1180 685 325 235 202

MULTI-V10002/2-OGE-T4/2/6 22 16 180 FF300 43,5 1302 783 370 249 230

MULTI-V10002/1-OGE-T4/2/6 30 16 200 FF350 60 1382 783 415 255 277

MULTI-V10002-OGE-T4/2/6 37 16 200 FF350 74,7 1382 783 415 275 277

MULTI-V10003/2-OGE-T4/2/6 37 16 200 FF350 74,7 1502 881 415 275 304

MULTI-V10003/1-OGE-T4/2/6 45 16 225 FF400 97 1508 881 456 275 334

MULTI-V10003-OGE-T4/2/6 45 16 225 FF400 97 1508 881 456 275 334

MULTI-V10001/1-FGE-T4/2/6 15 25 160 FF300 30 1161 685 325 208 187

MULTI-V10001-FGE-T4/2/6 18,5 25 160 FF300 38,5 1180 685 325 235 202

MULTI-V10002/2-FGE-T4/2/6 22 25 180 FF300 43,5 1302 783 370 249 230

MULTI-V10002/1-FGE-T4/2/6 30 25 200 FF350 60 1382 783 415 255 277

MULTI-V10002-FGE-T4/2/6 37 25 200 FF350 74,7 1382 783 415 275 277

MULTI-V10003/2-FGE-T4/2/6 37 25 200 FF350 74,7 1502 881 415 275 304

MULTI-V10003/1-FGE-T4/2/6 45 25 225 FF400 97 1508 881 456 275 334

MULTI-V10003-FGE-T4/2/6 45 25 225 FF400 97 1508 881 456 275 334

43

MULTI-V

53, bd de la République - Espace Lumière - Bât. 6 - 78403 Chatou Cedex - FRANCE | SALMSON Contact : +33 (0)820 0000 44 | Fax. : +33 (0)1 30 09 82 82 | www.salmson.com

FEATURES

a) Electrical- “T” Types : Three-phase 60Hz - 220 to

255 V or Three-phase 60Hz - 380 to 440V.

- “M” Types : single phase 230 V ∆ - 60 Hz with outside capacitor.

- Motor protection overload circuit breaker.- Connections to the motor terminal by gland stuffing box.

b) Installation- On foundation block with anchor bolt fixing.- Pump installation suction with compulsory strainer-foot valve, or pump on-load on storage tank or on town water network with guard system against running dry.

- Connection to the pump by oval or round mating pipe flanges for the PN16 series, and by round mating pipe flanges or «Victaulic» clip for the PN 25 series.

c) Packaging• PN 16 series - with oval flanges - pump supplied with cast-iron oval mating pipe flanges, gaskets and bolts;

- with round flanges - pump supplied with gas-kets and bolts without mating pipe flanges (optional).

• PN 25 series - with round flanges - pump supplied with gas-kets and bolts without mating pipe flanges (optional).

- with «Victaulic» unions - pump supplied with gaskets and bolts («Victaulic» clips optional).

• Pump motorless on request

d) MaintenanceSpare part replacement recommended (•)susceptible to wear and tear.

ACCESSORIES

OPTIONS & ACCESSORIES

• By-pass kit for boiler feed.• Isolating valve.• Check valve.• Foot valve-strainer.• Anti-vibration sleeve.• PN 25 round threaded counter-flange.• Bladder or galvanized tanks.• Anti-hammer tanks.• ME dry-running protection kit.• Circuit-breaker to protect 3-phase motor…

• Discontactor for TP motor protection

• Check valve

• Isolation valve

• Anti-vibration sleeves

• Anti-vibration sleeves

• Anti-water hammer tank

• Bladder tank

44

MULTI-V

Documents

APPLICATIONS - · PDF file- Heating - Air conditioning ... APPLICATIONS ADVANTAGES ... 9683 - Pump name plate 9902 A - Top shaft end screw 9902 B - Bottom shaft end screw