APOLLO MULTIPURPOSE LINEAR

© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners.800.660.9340 | orionlighting.com

APOLLO MULTIPURPOSE LINEAR

MPAL1 Applications The APOLLO MPAL1 is ideal for low bay, assembly line, strip, surface mount, continuous run or task options in warehouse and retail environments where linear lighting is needed.

Rated Life100,000 hours L70

WarrantyOrion APOLLO class LED fixtures are covered by a five-year limited warranty. Accessories and individual components are covered by separate OEM supplier warranties.

Electrical • Available in 120v-277v• Full Dimming (0-10v) driver

standard

Ambient Operating RangeSee ambient operating table onpage 2

Fixture Certification & Listings• UL/cUL Listed for Damp Locations• Buy American Act Compliant• DesignLights Consortium™

Standard qualified luminaire• Visit the DLC QPL for listed models

Features

• Innovative design and order logic allows for a continuous run. Wire harness option provides left, right and center electrical connection for continuous run fixtures and provides "quick connect system" between fixtures for labor savings and ease of installation

• Contour frosted lens available to reduce glare and spread light evenly

• White heavy gauge cold rolled steel body and end caps standard

• Plastic end caps available• Fixture can be surface mounted

or suspended mounted• Battery backup available• Field installed wireguard kit

available• Single or bulk packaging available

to suit job installation needs• 10 kA surge protection available• Factory or field installed controls

available

MPAL1A1UNVFDXXFRL850

1

https://www.designlights.org/search/


MPAL1

Performance Information, Frosted Lens3, 8

SeriesNominal

Lumen CodeActual

Lumens Input

VoltageWattage LPW CCT CRI

Input Current

Power Factor

4’ Increment

MPAL1 A1 1,738lm 120v 13w 138 5000K ≥80 0.10A >.90

MPAL1 B1 2,986lm 120v 21w 141 5000K ≥80 0.18A >.90

MPAL1 C1 4,488lm 120v 32w 139 5000K ≥80 0.27A >.90

MPAL1 D1 6,366lm 120v 50w 128 5000K ≥80 0.41A >.90

8’ Increment

MPAL1 E1 3,597lm 120v 23w 157 5000K ≥80 0.19A >.90

MPAL1 F1 6,181lm 120v 38w 161 5000K ≥80 0.32A >.90

MPAL1 G1 9,290lm 120v 59w 158 5000K ≥80 0.49A >.90

MPAL1 H1 13,717lm 120v 90w 146 5000K ≥80 0.75A >.90

C1 FRL 840 C1 NOL 840

PhotometricsVisit orionlighting.com to obtain all .IES files

Fixture Size

Length Width

Depth with

Frosted Lens

Depth with No

Lens

Weight4

4' 46.00” 2.70” 3.75" 2.13” 6.60lbs.

8' 92.00" 2.70" 3.75" n/a 13.20lbs.

Physical Information


2

Ambient Operating Temperatures6,11

Nominal Lumen Code

Standard Range

A1/C1/E1/G1 -20°C - 50°C (-4°F - 122°F)

B1/F1 -20°C - 45°C (-4°F - 113°F)

D1/H1 -20°C - 35°C (-4°F - 95°F)

http://www.orionlighting.com/



MPAL1

Ordering InformationSeries Fixture

SizeNominal Lumen Code1

Voltage Driver Type2

Lens Op-tions

CRI; Color Temp

Power Connection

Fixture Options

Control Op-tions

Continuous Run Option

Packaging Options

MPAL1= APOLLO LED Multipurpose Linear, Gen 1

4= 4'

8= 8'

*4' is available with the No Lens

(NOL) and the Frosted

Lens option

(FRL). 8' is only

available in Frosted

Lens (FRL)

4'A1= 1,500lm

B1= 3,000lm

C1= 4,500lm

D1= 6,500lm

8'E1= 3,500lm

F1= 6,500lm

G1= 9,000lm

H1= 14,000lm

UNV= 120v-277v

FDXX= Full Dimming 0-10v

NOL= No Lens

FRL= Con-tour Frosted

840= 80CRI; 4000K

850= 80CRI; 5000K

(Blank)= Hardwire

Cord Mounted from Back of Fixture06W= 6’ Whip, White that exits from back of fixture

11W= 11’ Whip, White that exits from back of fixture

06B= 6’ Whip, Black that exits from back of fixture

11B= 11’ Whip, Black that exits from back of fixture

Cord Mounted from End of Fixture06WE= 6’ Whip, White that exits from end of fixture end cap

11WE= 11’ Whip, White that exits from end of fixture end cap

06BE= 6’ Whip, Black that exits from end of fixture end cap

11BE= 11’ Whip, Black that exits from end of fixture end cap

(Blank)= No Options

BBXX= Battery Back Up2,5,6,8

TS= 10 kA Surge Protection

PC= Plastic End Caps

Note: Wireguard Available (See Accessories Table)

(Blank)= No Option

-P2= Philips EasySense SNS20010

EN1= Enlighted One PIR Sensor, HIGH/LOW/OFF, Active Dimming And Daylighting, Wireless Grouping10,11

EN2= Enlighted Connected: All Features of EN1 - PLUS BLE Radio, Temperature Sensor, Scene Control, Demand Response, Data Collection, BMS Integration, Cloud Access10,11

EN3= Enlighted IoT: All Features of EN2 - PLUS access to Apps: Space Management, Asset Tracking, and Contact Tracing Apps10,11

Note: Plastic end caps (PC) come standard with all control options, and do not need to be added to order logic

(Blank)= No Option

WIHA= Includes Connector Raceway Bracket, Power Only Wire Harness and End Caps9

(Blank)= Bulk Pack

-SP= Single Pack

Ordering Information Example (NOTE: No dashes or spaces unless noted below)

Series Fixture Size

Nominal Lumen Code

Voltage Driver Type

Lens Option

CRI; Color Temp

Power Connection

Fixture Options

Control Options

Continuous Run Option

Packaging Options

MPAL1 4 A1 UNV FDXX FRL 850 (Blank) BBXX (Blank) WIHA -SP

3

http://files.orionlighting.com/resources/PRODUCT/Accessories/Cord%20and%20Plug%20Selector%20Guide/Power_Supply_Selector_Guide.pdf

http://files.orionlighting.com/resources/PRODUCT/Accessories/Cord%20and%20Plug%20Selector%20Guide/Power_Supply_Selector_Guide.pdf

http://files.orionlighting.com/resources/PRODUCT/Controls-Sensors/Controls%20New%20File%20Name%20Structure/SNS200_EasySense%20Philips_Troffer.PDF

http://files.orionlighting.com/resources/PRODUCT/Controls-Sensors/Controls%20New%20File%20Name%20Structure/EN_Enlighted%20SU_Troffer.pdf




MPAL1


Accessories (Field Installed)

Accessories (Field Installed)

Sensor Configuration Tool (FSIR-100)

Wireguard (LED-MPAL-WG01-KIT-SP)7

Non-Dimming Sensor (OSFLA-ITW)

Dimming Sensor(FSP-221B-D)

4Continuous Run Option (WIHA)

(Includes Connector Raceway Bracket, Wire Harness (Installed in factory-not shown), End Caps)

EN1 Accessories Required for Commissioning11

WS-2-00-ILEnlighted Wall Switch Room Controller - For Use with EN1 Enlighted Sensor (Quantity Needed Varies by Facility Layout and Fixture Group Size) Note: Max. of 4 switches per zone/group

LP-1-00 Green Laser for Commissioning EN1 Enlighted Sensor

Note: Contact your Orion representative regarding additional commissioning, quantities and back end control system pricing

Non-Dimming Sensor Option

OSFLA-ITW White End Mounted PIR ON/OFF Sensor, 120/230/277v, Includes 360˚ High Bay and Low Bay Lens

Dimming Sensor Options

To order Dimming sensor, select one option from each column below and combine part numbers (Example: FSP-221B-D-L2-W)

Pole or Box Mount Sensor Voltage

Nipple Configuration

Lens Option

Color

FSP-221B, 100-347v, 480v Sensor

-D= Drop Nipple

-L2= 360˚ Lens, Max Coverage 48’ Diameter from 8’ Height

-W= White



Sensor Configuration Tool (Ordered Separately)

FSIR-100 Hand-Held Sensor Configuration Tool Required for Adjusting Default Factory Settings, Including Hi/Low/Off Modes and Sensitivity/Time Delay/Cut Off (For Use with FSP-221B)

Suspended Mounting Option

HW-FC009 Hanging Cable Set: Adjustable 120”, Loop, Narrow Fixture Y-Fit with (2) Toggles

Wireguard Option7

LED-MPAL-WG01-KIT10 4' Fixture Wireguard, Bulk Pack NOTE: Not available for models with (ENx) or (-P2) option

LED-MPAL-WG01-KIT-SP10 4' Fixture Wireguard, Single Pack NOTE: Not available for models with (ENx) or (-P2) option

Tandem Kit Options

MPXL-TANDEM-001-HDWR-KIT HARDWARE KIT: For Lensed MPAL Tandem Fixtures, Kit Includes: (1) Tandem Plate, (1) Modified Tall End Cap, and Screws

MPXL-TANDEM-002-HDWR-KIT HARDWARE KIT: For No Lens MPAL Tandem Fixtures, Kit Includes: (1) Tandem Plate, and Screws [4' fixtures only]

MPXL-TANDEM-002-HDWR-KIT HARDWARE KIT: For No Lens MPHL Tandem Fixtures, Kit Includes: (1) Tandem Plate, and Screws [4' fixtures only]

https://files.orionlighting.com/resources/PRODUCT/Controls-Sensors/Controls%20New%20File%20Name%20Structure/OSFLA%20ITW_Leviton_Linear.pdf

https://files.orionlighting.com/resources/PRODUCT/Controls-Sensors/Controls%20New%20File%20Name%20Structure/FSP-2X1B_Troffer%20and%20High%20Bay.pdf

https://files.orionlighting.com/resources/PRODUCT/Controls-Sensors/Controls%20New%20File%20Name%20Structure/FSIR%20100%20Remote.pdf


P-INT-XS-092 Rev. 210603

1 For actual lumens, see performance table2 "XX” is a character placeholder for the manufacturing configuration3 Actual performance may vary by up to ±10% of values listed; facility factors and fixture options can affect performance values4 Weight will vary based on option selection

5 In continuous run applications, battery back up needs separate customer-provided electrical connection that is not provided in the wire harness (WIHA) option6 Fixture with Battery Back Up cannot be installed in an environment where the ambient temperature falls below 32°F 7 All wireguards are shipped in 4' increments. For 8' fixtures, two 4' wireguards are required

Additional Specification Information

Fixture Options (Factory Installed)

Battery Back Up (BBXX)

MPAL1


5

Contour Lens Option (FRL)

8 Multiply 10 watts by the lumens per watt (LPW) of the fixture to calculate lumen output in emergency mode9 Can not be ordered with sensor options (-P2) and (ENx)10 Wireguard (LED-MPHL-WG01-KIT and LED-MPHL-WG01-KIT-SP) and no lens option (NOL) cannot be ordered with integrated controls or plastic end caps (PC)11 ENx is limited to 0ºC (32ºF) environments

Plastic End Caps (PC)

Enlighted Sensor11 (ENx)

Philips EasySense (-P2)

Whip Exiting End of Fixture-Black (06BE)

Whip Exiting Back of Fixture-Black (06B)

Documents

APOLLO MULTIPURPOSE LINEAR