SUPERMAXA METAL ONE CONNECTION

757 N. Eldridge Parkway, Suite #650

Houston, Texas 77079

www.mtlo.co.jp/us/

Small Coupling ODSUPERMAX has a smaller coupling OD than API EUE allowing for enhanced production volume, more room for ESP cables and increased pump rates for hydraulic fracturing.

Pipe OD (inch) Weight (lbs/ft) WT (inch) Std OD (inch) SC OD (inch) JE (%) API EUE (OD)

2 3/8 4.60 0.190 2.875 2.700 114 3.063

2 7/8 6.40 0.217 3.500 3.250 112 3.668

3 1/2 9.20 0.254 4.250 3.900 100 4.500

4 1/2 12.60 0.271 5.000 4.950 102 5.563

Smaller Coupling OD of SUPERMAX

SUPERMAX Design Features• Threaded and coupled on non-upset plain end • Taper: 1/16 • 8 TPI for SUPERMAX/5 TPI for SUPERMAX 2 • Pin: Bare/Coupling: Phosphated

The reclamation of used API EUE tubing with an insufficient upset length for repair is one of the many low cost benefits of SUPERMAX. Additionally, SUPERMAX was designed for compatibility with various products such as internal plastic coating (IPC), glass-reinforced epoxy lining (GRE) and resilient seals.

2˚ Load Flank

45˚ Stabbing Flank

4 1/2" X 10.5 PPF Casing 4 1/2" X 10.5 PPF Casing

2 3/8" X 4.6 PPF SUPERMAX Special Clearance Coupling of 2.700" OD

3 1/2" X 9.2 PPF FLUSHMAX

5 1/2" X 17.0 PPF Casing

2 7/8" X 6.4 PPF SUPERMAX Standard Coupling of 3.50" OD

3 1/2" X 9.2 PPF SUPERMAX Standard Coupling of 4.250" OD

Thread Engagement

As API Buttress pin thread moves axially, high contact pressure cannot be induced on the load flanks.

Load and stabbing flanks of SUPERMAX threads have a high contact pressure that is energized on both flanks upon make-up, similar to an API 8 Round thread.

API 8 Round Thread

High contact pressure

API Buttress Thread

Low contact pressure

SUPERMAX Thread

High contact pressure

API 8 Round Thread

High contact pressure

API Buttress Thread

Low contact pressure

SUPERMAX Thread

High contact pressure

API 8 Round Thread

High contact pressure

API Buttress Thread

Low contact pressure

SUPERMAX Thread

High contact pressure

Without limiting and in addition to other disclaimers contained in the site, while every effort

has been made to ensure the accuracy of the information, Metal One Corporation and its

parents, subsidiaries or affiliates, including but not limited to MC Tubular Products. Inc, (herein

collectively referred to as “Metal One”) does not assume any responsibility or liability for any

loss, damage or injury resulting from the use of information and data provided herein. It is the

responsibility of the customer to make all engineering and safety-related determinations for

their own account. Customers should therefore undertake all necessary investigations when

developing the technical solution and safety factors for the specific installation and operating

conditions for the products. Metal One’s products are not recommended for use in deep water

offshore applications. For more information, please contact your Metal One sales representative

or refer to http://www.mtlo.co.jp/mo-con/_images/top/WebsiteTerms_Active_20333287_1.pdf,

the contents of which will apply to any purchases of these products.

HIGH PERFORMANCEMultiple make and break capabilities are made possible by the galling resistance of SUPERMAX. With unique thread engagement and tight machining tolerance, the sealing integrity of SUPERMAX allows for excellent internal pressure resistance. Because the tensile strength is equal to the pipe body, the joint strength remains unsurpassed.

SUPERIOR FITSUPERMAX is made with a smaller coupling OD than API EUE 8 Round, making it a better fit for low clearances. The absence of an external upset means more internal room for production volume, increased pump rates and ESP Cables.

COMPETITIVE PRICINGSUPERMAX is a reduced cost alternative to EUE tubing. The ease of threading on non-upset tubing equals lower cost accessories and extended product life, making SUPERMAX a very cost-effective alternative in the tubular market.

SUPERMAXSUPERMAX 1.900" – 4 1/2" SUPERMAX 2 5" – 13 3/8" SUPERMAX TS & TS2 2 3/8" – 7"

Connection D

ata The SUPERMAX Family Additional SUPERMAX Products and Product Extensions

SUPERMAX 2 | 5" to 13 3/8"Pros and Cons of API Connection

BTC: Pros High Joint Strength Cons Poor Leak Resistance

LTC: Pros Good Leak Resistance Cons Prone to Jump Out Applications for SUPERMAX 2 • Production casing for hydraulic fracturing • Production casing for low pressure gas wells

SUPERMAX TS & TS2 | 2 3/8" to 7" SUPERMAX-TS Series Features • Interchangeable with standard SUPERMAX

or SUPERMAX 2 • Internally flush to avoid turbulence• High torque resistance• Low hoop stress on the coupling SUPERMAX-TS Series Applications • Casing for shale plays with high pressure fracking • Tubing for thermal applications

(SAGD, steam injection)• Liner for horizontal sections

SUPERMAX-TSR (Option) Resilient seal for high gas pressure application

Joint Strength

Leak

Res

istan

ce API Round

API BTC

SMAX2

SMAX2 has:• Joint strength of Buttress• Leak resistance of 8 Round

Connection Perform

ance Properties

Pipe B

odyP

inC

ouplingC

ollapseInternal Y

ield Pressure

Minim

um Y

ield Load

Outside

Diam

eter (inch)

Nom

inal W

eight (lbs/ft)

Wall

Thickness (inch)

Inside D

iameter

(inch)

Drift

Diam

eter (inch)

Makeup Loss (inch)

Standard C

oupling O

D

(inch)

Special C

learance O

D

(inch)

Joint Efficiency

(%)

Length (inch)

J55 K55 (psi)

L80 N

80 (psi)

P110 (psi)

J55 K55 (psi)

L80 N

80 (psi)

P110 (psi)

J55 K55 (kips)

N80

(kips)L80 (kips)

P110 (kips)

2 3/8

4.600.190

1.9951.901

2.8482.875

2.700114

6.596

8,10011,780

16,1307,700

11,20015,400

72104

143

5.100.218

1.9391.845

2.700101

9,17013,340

18,3409,170

13,34017,670

81118

162

5.800.254

1.8671.773

2.750101

10,51015,280

21,01010,290

14,97020,590

93135

186

2 7/8

6.400.217

2.4412.347

2.9123.500

3.250112

6.724

7,68011,170

14,5507,260

10,57014,530

100145

199

7.800.276

2.3232.229

3.300101

9,55013,890

19,0909,240

13,44018,480

124180

248

8.600.308

2.2592.165

3.350102

10,52015,300

21,04010,310

15,00020,620

137199

273

3 1/2

7.700.216

3.0682.943

3.1624.250

3.850103

7.224

5,9707,860

9,7305,940

8,64011,880

122178

245

9.200.254

2.9922.867

3.900100

7,40010,540

13,5306,980

10,16013,970

142207

285

10.200.289

2.9222.797

4.000110

8,33012,120

16,6707,950

11,56015,900

160233

321

4 1/2

10.500.224

4.0523.927

3.4925.000

4.900109

7.934

4,0104,930

5,5504,790

6,9709,580

165240

331

11.600.250

4.0003.875

4.950110

4,9506,350

7,5705,350

7,78010,700

183267

367

12.600.271

3.9583.833

4.950102

5,7207,500

9,2105,800

8,43011,590

198288

396

13.500.290

3.9203.795

5.2505.000

1066,420

8,54010,690

6,2009,020

12,410211

307422

2 3/8

4.600.190

1.9951.901

2.8482.875

2.700114

6.446

8,10011,780

16,1307,700

11,20015,400

72104

143

5.100.218

1.9391.845

2.700101

9,17013,340

18,3409,170

13,34017,670

81118

162

5.800.254

1.8671.773

2.750101

10,51015,280

21,01010,290

14,97020,590

93135

186

2 7/8

6.400.217

2.4412.347

2.9123.500

3.250112

6.574

7,68011,170

14,5507,260

10,57014,530

100145

199

7.800.276

2.3232.229

3.300101

9,55013,890

19,0909,240

13,44018,480

124180

248

8.600.308

2.2592.165

3.350102

10,52015,300

21,04010,310

15,00020,620

137199

273

31/2

7.700.216

3.0682.943

3.1624.250

3.850103

7.074

5,9707,860

9,7305,940

8,64011,880

122178

245

9.200.254

2.9922.867

3.900100

7,40010,540

13,5306,980

10,16013,970

142207

285

10.200.289

2.9222.797

4.000110

8,33012,120

16,6707,950

11,56015,900

160233

321

12.700.368

2.7642.639

4.125110

10,35015,060

20,70010,120

14,72020,240

199289

398

4 1/2

10.500.224

4.0523.927

3.412

5.000

4.900109

7.574

4,0004,930

5,5504,790

6,9709,580

165240

331

11.600.250

4.0003.875

4.950110

4,9506,350

7,5705,350

7,78010,700

183267

367

12.600.271

3.9583.833

4.950102

5,7207,500

9,2105,800

8,43011,590

198288

396

13.500.290

3.9203.795

5.2505.000

1066,420

8,54010,690

6,2009,020

12,410211

307422

15.100.337

3.8263.701

5.000100

7,62011,080

14,3407,210

10,48014,420

242353

485

SUPERM

AX

SUPERM

AX

TS

Additional sizes available.

(Imperial U

nit)

The SUPERMAX Advantage• Non-upset tubing• Easy threading• Cheaper accessories • Extended product life• Small coupling OD• Sealing integrity • Joint strength• Galling resistance