• Home

  • Documents

  • AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance...
8

AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance

  • Upload
    others

  • View
    11

  • Download
    1

Embed Size (px)

Citation preview

Page 1: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance
Page 2: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance
Page 3: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance
Page 4: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance
Page 5: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance
Page 6: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance
Page 7: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance
Page 8: AphexAuralExciterTypeC-OperatingGuide · The Aphex Type C Aural Exciter has a high input impedance (47k Ohms, unbalanced) and low output impedance (150 Ohms). The high input impedance

Grand T O urin Gs eries - Official JBL Store · 5W – 200W 5W – 200W Frequency response: 53hz – 21khz 67hz – 21khz nominal impedance: 3 ohms 3 ohms ... RMs do amplificador:

Grand T O urin Gs eries - Official JBL Store · 5W – 200W 5W – 200W Frequency response: 53hz – 21khz 67hz – 21khz nominal impedance: 3 ohms 3 ohms ... RMs do amplificador:

Documents
Artisan Technology Group is your source for quality ... · Line_In Full Scale Input 2.0 Vrms Line_Out Full Scale Output 2.0 Vrms Microphone Input Impedance > 4.0K ohms Line_In Impedance

Artisan Technology Group is your source for quality ... · Line_In Full Scale Input 2.0 Vrms Line_Out Full Scale Output 2.0 Vrms Microphone Input Impedance > 4.0K ohms Line_In Impedance

Documents
POWR-GARD - Littelfuse · of 10 ohms. But in a single-phase situation, the same system might have a load impedance of 0.005 ohms or less. In order to compare the two scenarios, it

POWR-GARD - Littelfuse · of 10 ohms. But in a single-phase situation, the same system might have a load impedance of 0.005 ohms or less. In order to compare the two scenarios, it

Documents
I:(1€¦ · H12=1:131 TECHNICORNER Frequency Response: 50 to 15,000 Hz Polar Pattern: Omnidirectional Impedance: 150 ohms (200 ohms ... Features questions and answers, problems to

I:(1€¦ · H12=1:131 TECHNICORNER Frequency Response: 50 to 15,000 Hz Polar Pattern: Omnidirectional Impedance: 150 ohms (200 ohms ... Features questions and answers, problems to

Documents
OperatingGuide - Sears Parts Direct · OperatingGuide TwinTemp® Heat Pump & Electric ... forming condition by cleaning the filter ... It is normal for ice to form on the outdoor

OperatingGuide - Sears Parts Direct · OperatingGuide TwinTemp® Heat Pump & Electric ... forming condition by cleaning the filter ... It is normal for ice to form on the outdoor

Documents
WELCOME to The NFARL SIG Antenna Discussion on Horizontal ... · G5RV on 15-Meters Impedance 72.64 + J 279.6 ohms Gain 9.4 dbi at 16 Deg. G5RV on 12-Meters Impedance 125.5 + J 35.19

WELCOME to The NFARL SIG Antenna Discussion on Horizontal ... · G5RV on 15-Meters Impedance 72.64 + J 279.6 ohms Gain 9.4 dbi at 16 Deg. G5RV on 12-Meters Impedance 125.5 + J 35.19

Documents
chorus 705 - Focal...Nom. impedance 8 Ohms Minimum impedance 3 Ohms Recommended amplifier power 25 - 100W Crossover frequency 3000Hz Dimensions (HxLxP) 123/8x71/2x815/16" (315x190x227mm)

chorus 705 - Focal...Nom. impedance 8 Ohms Minimum impedance 3 Ohms Recommended amplifier power 25 - 100W Crossover frequency 3000Hz Dimensions (HxLxP) 123/8x71/2x815/16" (315x190x227mm)

Documents
… · 9. 3 4 aÌ d. 1.33 An RL circuit has a resistance of 3 Ohms and a reactance of 4 ohms, the impedance of the circuit is 5 Ohrns 7 Ohms 1 ohm d. 1.33 ohms

… · 9. 3 4 aÌ d. 1.33 An RL circuit has a resistance of 3 Ohms and a reactance of 4 ohms, the impedance of the circuit is 5 Ohrns 7 Ohms 1 ohm d. 1.33 ohms

Documents
IC-F1000 F2000 OperatingGuide

IC-F1000 F2000 OperatingGuide

Documents
Studio - images-na.ssl-images-amazon.comPARALLEL PAIR of 8-Ohms speakers (the total impedance is 4 ohms) in a PARALLEL hook up, the TOTAL IMPEDANCE of this system is 3.2 OHMS, so you

Studio - images-na.ssl-images-amazon.comPARALLEL PAIR of 8-Ohms speakers (the total impedance is 4 ohms) in a PARALLEL hook up, the TOTAL IMPEDANCE of this system is 3.2 OHMS, so you

Documents
Dynatel - multimedia.3m.com · 1K ohm to 9.9K 10K ohms to 99.9K ohms 100K ohms to 999K ohms 1M ohm to 9.9M ohms 10M ohms to 30M ohms 1 ohm ohms 10 ohms 100 ohm 1K ohm 100K ohms 1M

Dynatel - multimedia.3m.com · 1K ohm to 9.9K 10K ohms to 99.9K ohms 100K ohms to 999K ohms 1M ohm to 9.9M ohms 10M ohms to 30M ohms 1 ohm ohms 10 ohms 100 ohm 1K ohm 100K ohms 1M

Documents
SERIES 200 - Industrial Controls TEMPERATURE TABLE 3 TEMPERATURE COEFFICIENT = .00385 PER IEC 751 C Ohms C Ohms C Ohms C Ohms C Ohms C Ohms 220 183.19 230 186.84 240 190.47 250 194.10

SERIES 200 - Industrial Controls TEMPERATURE TABLE 3 TEMPERATURE COEFFICIENT = .00385 PER IEC 751 C Ohms C Ohms C Ohms C Ohms C Ohms C Ohms 220 183.19 230 186.84 240 190.47 250 194.10

Documents
PB317X HIGH PERFORMANCE POWERAMPLIFIER ......RMS Power @ 4 ohms RMS Power @ 2 ohms 40Watts×2 60Watts×2 frequency response10Hz-70KHz input sensitivity input impedance high 100level

PB317X HIGH PERFORMANCE POWERAMPLIFIER ......RMS Power @ 4 ohms RMS Power @ 2 ohms 40Watts×2 60Watts×2 frequency response10Hz-70KHz input sensitivity input impedance high 100level

Documents
OPERATING MANUAL TDR CABLE FAULT LOCATORsoneltest.com/media/product_attachments/tdf410_insobs_v1_0_ang.… · The TDR-410 has impedance matched circuits for 25, 50, 75 and 100 ohms

OPERATING MANUAL TDR CABLE FAULT LOCATORsoneltest.com/media/product_attachments/tdf410_insobs_v1_0_ang.… · The TDR-410 has impedance matched circuits for 25, 50, 75 and 100 ohms

Documents
OWNER’S MANUALstatic.highspeedbackbone.net/pdf/JBL GTO5355 Amplifier Manual.pdf · •Minimum speaker impedance for stereo operation is 2 ohms. ... Install an appropriate fuse holder

OWNER’S MANUALstatic.highspeedbackbone.net/pdf/JBL GTO5355 Amplifier Manual.pdf · •Minimum speaker impedance for stereo operation is 2 ohms. ... Install an appropriate fuse holder

Documents
Premium sound 60 W 8' ceiling lsp (2pcs) · 60.00000 70.00000 80.00000 90.00000 100.00000 Sensitivity (dB) Impedance (Ohms) Frequency (Hz) Frequency, Half Space Impedance Frequency

Premium sound 60 W 8' ceiling lsp (2pcs) · 60.00000 70.00000 80.00000 90.00000 100.00000 Sensitivity (dB) Impedance (Ohms) Frequency (Hz) Frequency, Half Space Impedance Frequency

Documents
SMA Amphenol - Farnell · SMA Amphenol® Specifications 56 Amphenol Corporation Tel: 800-627-7100 ELECTRICAL Impedance 50 ohms Frequency range .141" & .085" O.D

SMA Amphenol - Farnell · SMA Amphenol® Specifications 56 Amphenol Corporation Tel: 800-627-7100 ELECTRICAL Impedance 50 ohms Frequency range .141" & .085" O.D

Documents
Studio - Pyle USAmanuals.pyleusa.com/PDF/PA205.pdf · PARALLEL PAIR of 8-Ohms speakers (the total impedance is 4 ohms) in a PARALLEL hook up, the TOTAL IMPEDANCE of this system is

Studio - Pyle USAmanuals.pyleusa.com/PDF/PA205.pdf · PARALLEL PAIR of 8-Ohms speakers (the total impedance is 4 ohms) in a PARALLEL hook up, the TOTAL IMPEDANCE of this system is

Documents
TC IMAGEBUILDING - SALTO-YOUTH …  · Web viewThis is similar to audio speakers having an impedance between 4 and 8 ohms. When an RF amplifier with a 50 ohm input impedance is attached

TC IMAGEBUILDING - SALTO-YOUTH …  · Web viewThis is similar to audio speakers having an impedance between 4 and 8 ohms. When an RF amplifier with a 50 ohm input impedance is attached

Documents
AMPLIFIERS75x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms* 75x4 @ 4 ohms 125x4 @ 2 ohms 250x2 @ 4 ohms* Sub: 150x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm 200x1 @ 4 ohms 300x1 @ 2 ohms 250x1

AMPLIFIERS75x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms* 75x4 @ 4 ohms 125x4 @ 2 ohms 250x2 @ 4 ohms* Sub: 150x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm 200x1 @ 4 ohms 300x1 @ 2 ohms 250x1

Documents
· PDF fileccu ase STEREO POWER AMPLIFIER P-500L 10-parallel push-pull power stage 270Wx2(8 ohms) Low impedance speaker can be

· PDF fileccu ase STEREO POWER AMPLIFIER P-500L 10-parallel push-pull power stage 270Wx2(8 ohms) Low impedance speaker can be

Documents
4- or 8-channel power amp systems—220 Watts RMS …€¦ · High Pass Filter 70 Hz, 3rd order HPF 70 Hz, 3rd order HPF Input Impedance: 20K Ohms balanced, 10K Ohms unbalanced 20K

4- or 8-channel power amp systems—220 Watts RMS …€¦ · High Pass Filter 70 Hz, 3rd order HPF 70 Hz, 3rd order HPF Input Impedance: 20K Ohms balanced, 10K Ohms unbalanced 20K

Documents
UNIVERSAL CONTROL CABLE QUICK START …prominent.us/promx/pdf/gala_sigma_quick_start.pdfUNIVERSAL CONTROL CABLE - Purchased ... Black - input, Pump Impedance 120 ohms ... • Recommended

UNIVERSAL CONTROL CABLE QUICK START …prominent.us/promx/pdf/gala_sigma_quick_start.pdfUNIVERSAL CONTROL CABLE - Purchased ... Black - input, Pump Impedance 120 ohms ... • Recommended

Documents
XPR520 - Dual6 Amplifier Connections Speaker Connections Connect speaker wires observing polarity. The minimum impedance load for the XPR520 is 2 ohms stereo and 4 ohms bridged. Use

XPR520 - Dual6 Amplifier Connections Speaker Connections Connect speaker wires observing polarity. The minimum impedance load for the XPR520 is 2 ohms stereo and 4 ohms bridged. Use

Documents
EOe-1 User Manual 1. Introduction 2 1.2 Technical Specifications E1 link Framing Unframed Bit Rate 2,048 Kbps Line Code AMI HDB3 Line Impedance 75 Ohms (BNC coaxial) 120 Ohms (RJ-48

EOe-1 User Manual 1. Introduction 2 1.2 Technical Specifications E1 link Framing Unframed Bit Rate 2,048 Kbps Line Code AMI HDB3 Line Impedance 75 Ohms (BNC coaxial) 120 Ohms (RJ-48

Documents
Ideal For Blind Mate Applications - Delta Electronics · Ideal For Blind Mate Applications Electrical – SMPM Contacts Characteristic Impedance: 50 ohms Operating Frequency: DC to

Ideal For Blind Mate Applications - Delta Electronics · Ideal For Blind Mate Applications Electrical – SMPM Contacts Characteristic Impedance: 50 ohms Operating Frequency: DC to

Documents
FOM01-MUX Fiber E1 Multiplexer - ctcu.com.tw · PDF fileHDB3 Line Impedance Unbalanced 75 ohms (BNC) Balanced 120 ohms (RJ -45) Receiver sensitivity -20dB "Pulse" Amplitude Nominal

FOM01-MUX Fiber E1 Multiplexer - ctcu.com.tw · PDF fileHDB3 Line Impedance Unbalanced 75 ohms (BNC) Balanced 120 ohms (RJ -45) Receiver sensitivity -20dB "Pulse" Amplitude Nominal

Documents
FOWLER CHAPTER 13 LECTURE 13 RCL CIRCUITS. IMPEDANCE (Z): COMBINED OPPOSITION TO RESISTANCE AND REACTANCE. MEASURED IN OHMS. CHAPTER 13 COMBINED RESISTANCE,

FOWLER CHAPTER 13 LECTURE 13 RCL CIRCUITS. IMPEDANCE (Z): COMBINED OPPOSITION TO RESISTANCE AND REACTANCE. MEASURED IN OHMS. CHAPTER 13 COMBINED RESISTANCE,

Documents
 · ELECTRICITY The voltage E , current I, and impedance Z in a circuit are ... ELECTRICITY The impedance Z of a circuit depends on the ... I = 5 ± 4j amps, Z = 3 + 2 j ohms

 · ELECTRICITY The voltage E , current I, and impedance Z in a circuit are ... ELECTRICITY The impedance Z of a circuit depends on the ... I = 5 ± 4j amps, Z = 3 + 2 j ohms

Documents
T2FD, Terminated & twisted folded dipole - … is a 600-900 ohms folded dipole, terminated with resistor. Feed impedance is coupled with 50/600 ohms voltage balun. It is a wide band

T2FD, Terminated & twisted folded dipole - … is a 600-900 ohms folded dipole, terminated with resistor. Feed impedance is coupled with 50/600 ohms voltage balun. It is a wide band

Documents