Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
“One Stop Tooling and Machine Shop”
Inc.
Our MissionNTM is committed to providing the best possible serviceand products to our customers. Whether it’s manufacturingspecial tooling, machining, or one of our patented products,our attention to detail and emphasis on quality ensures thatour customers can rely on us for all of their tooling andmanufacturing needs.
INDEX
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
Products & Services
Made in the USA
“One Stop Tooling and Machine Shop”
Inc.
Boring BarIdentification
MCLN-MWLN
SCLP-SCLC
SDUP-SDUC
SWLP-CSWL
STFC-STFP
STUP-STUC
STUN-CTFP
CSTJ-NEL/R
NELL-NELR
MCLN-MWLN
SCLP-SCLC
SDUP-SDUC
SWLP-CSWL
STFC-STFP
STUP-STUC
-CTFP
STJO-NEL/R
NELL-NELR
STUN
page - 38
page - 20
page - 21
page - 22
page - 23
page - 24
page - 25
page - 26
page - 27
page - 28
page - 29
page - 30
page - 31
page - 32
page - 33
page - 34
page - 35
page - 36
page - 37
Boring Bars
Steel
CarbideCustom Tool Grinding
Request for Quote # 1
Request for Quote # 2
Request for Quote # 3
Re-Sharpening Services
NTM Sharpening Services
Special Indexable Tooling
Indexable Tool Repair
Nu-Head Pricing for Boring Bars
Magnetic V-Blocks
Smart Flow Swiss Holder
Smart Flow Swiss Holders
Stubby Indexable Drill
Laydown Thread Bar
page - 4
page - 5
page - 6
page - 7
page - 8
page - 9
page - 10
page - 11
page - 12
page - 13
page - 14
page - 15
page - 16 & 17
page - 18 & 19
> Solid Carbide
> Brazed Carbide
> H.S.S. / Cobalt
> Coatings
For over forty years NTMhas been providing customground cutting tools andrelated grinding servicesto manufacturers aroundthe world.Combining our years ofexperience and crafts-manship with the technologyof today’s grinding equipmentwe are helping our customersincrease productivity withinnovative tooling solutions.From designing a new toolto putting a new edge on an oldtool, NTM is the answer for yourcustom grinding needs!
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921 Made in the USA
1-800-274-4686 www.ntminc.com
5 axis Walters HMC 500 7 axis Anca TGX 7 axis Anca RGX
Tru Tech Blank Prep-Centerless GrinderCobalt Dominator Laser Etcher
“One Stop Tooling and Machine Shop”
Inc.
4
CUSTOMTOOL GRINDING
YOUR COMPLETE TOOL SERVICE CENTER CUSTOM TOOL REQUEST FORM
A= __________________ MATERIAL ___ SOLID CARBIDE___ HSS B= __________________ NUMBER OF FLUTES____2 _____3 D1= __________________ FLUTE____ STRAIGHT_____HELICAL D2= __________________ D2____CUTTING _____NON CUTTING L1= __________________ COOLANT THRU____YES ___ NO L2= __________________ COATING____TiN___TiCN___ALTiN_ALPHA__NONE___OTHER__________ MATERIAL TO BE MACHINED________________________________________ CUSTOMER NAME:_________________________________________________ PHONE:_______________ E-MAIL:_____________________________________ QUANTITIES________________________________________________________
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
Made in the USA
5
YOUR COMPLETE TOOL SERVICE CENTER CUSTOM TOOL REQUEST FORM
A= __________________ MATERIAL: ___ SOLID CARBIDE___ HSS D1= __________________ NUMBER OF FLUTES____2 _____3 D2= __________________ FLUTE____ STRAIGHT_____HELICAL D3= __________________ D2____CUTTING _____NON CUTTING L1= __________________ COOLANT THRU____YES ___ NO L2= __________________ L3= __________________ S1= ANGLE______ DIM_______ OR R1=RADIUS_________ S2= ANGLE______ DIM_______ OR R2=RADIUS_________ S3= ANGLE______ DIM_______ OR R3=RADIUS_________ S4= ANGLE______ DIM_______ OR R4=RADIUS_________ COATING____TiN___TiCN___ALTiN_ALPHA__NONE___OTHER__________ MATERIAL TO BE MACHINED___________________ QUANTITIES____________ CUSTOMER NAME:_________________________________________________ PHONE:_______________ E-MAIL:_____________________________________
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
Made in the USA
6
YOUR COMPLETE TOOL SERVICE CENTER CUSTOM TOOL REQUEST FORM
Date Requested: __________ Date Required: __________ Company Name: ______________________Contact Information: Phone: __________ Fax: ______________ E-Mail:______________________________________ Tool Type: High Speed Steel ___ Carbide: ___ Brazed Carbide: ___ Insert Tool: ____ Coating: ____TiN___ TiCN ___ ALTiN ____ALPHA___NONE___OTHER__________ Material to Machine: ___________________ Quantity Requested: ____________ Shank Diameter: ________ Length of Tool Shank: _______ Overall Tool Length: _____ Depth of Cut: ____________ Flute Length: ____________ Coolant Thru: _____ Drawing #: _________________ Cad or PDF files can also be sent for hole geometry. Hole Description: _________________________________________________________ ________________________________________________________________________
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
Made in the USA
7
RE-SHARPENING SERVICES
- Drills
- End Mills
- Countersinks
- Gun Drills
- Saws
Our Anca CNC Grinders can duplicatethe cutting geometries of most cutting tool manufacturers products.Whether it’s drills, end mills, or countersinks,re-sharpening your carbide tooling canprovide your company with considerablecost savings. Re-coating the tooling in allof the current coatings is also available.If necessary, we can also provide bins tohold the tooling, which keeps the tools from being further damaged.
NTM can re-sharpen virtually any carbide cutting tool!
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
***Call today for a bin andwe’ll send one right away!
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
Made in the USA
8
KOMET SERVICE PartnerYour single source for tool processing -fast, easy and complete
KOMET SERVICE offers our customers additional servicebenefits that help ensure a consistent, optimal tool quality inorder to maximize process reliability in production.
partnerwho will provide a detailed estimate.
KOMET SERVICE includes professional re-grinding, originalre-coating, high-precision refurbishing and a complete rangeof standard and simple special carbide tools.
KOMET SERVICE partners are your competent, localcontacts for professional tool processing. They offer youeverything from a single source; fast, easy, and complete.
Special solid carbide tools
KOMET SERVICE partners also offer great value for yourmoney with the fabrication of special solid carbide tools. Step- drills and multi-blade milling cutters can be configured withspecific geometries to meet your requirements.
Discuss your needs with your local KOMET SERVICE ®
®
®
®
®
®
Ship To:NTM Inc. 151 Longfellow St. N.E. Mpls, MN 55432
NTM STANDARD SHARPENING CAPABILITIES
• Carbide and HSS End Mills / Rougher End mills
• Carbide, HSS and Powdered Metal Drills
• Countersinks• Roto Broaches• Unitbits• Gundrills• Threadmills• Engraving Tools• Dead Centers• Reamers
• Center Drills• Keyway / Woodruff Cutters• Spot Drills• Corner Rounds• Counterbores / Spotfacers• Spade Drill Inserts• Slitting Saws• Broaches• Taps• Shapers• Milling Cutters
NTM also makes and sharpens all types of special tooling in Solid Carbide, Carbide Tipped and HSS. Email [email protected] or call 1-800-274-4686 for a quote.
NTM, Inc | 151 Longfellow St. NE Minneapolis, MN 55432 | Phone: 1-800-274-4686 Fax: 763-780-8921 | www.ntminc.com
9
SPECIAL INDEXABLE TOOLING
* Drills
* Boring Bars
* Shell Mill Holders
* Milling Cutters
* Design
* Custom Inserts
“Increasing productivity with innovative tooling solutions”
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
NTM has a long history of making custom indexable tooling. Utilizing Solid Worksdesign software we can create just about any type of indexable tooling you mayrequire. Modular shank tools such as CAT 40 or CAT 50, HSK, Capto, ABS, KMor straight shank are options, as well as tools utilizing cartridges or fixed pockets.We can work from part prints, solid models or simple drawings. Simply contact usand we can build you a tool that will help you cut machine time and utilize theindexable inserts you are currently using.
Made in the USA
10
INDEXABLE TOOL REPAIR
* Boring Bars
* Turning Tools
* Milling Cutters
* Drills
* Specials
NTM specializes in repairing all typesof indexable tooling to manufacturesspecifications
From this:
To this:
NU-HEAD TM
Replacement Head System for carbide shank boring bars
NU-HEAD is the most economical way to repair damaged indexable boring bars! We manufacture over 150 different sizesand styles of heads to quickly andaccurately restore your damaged bars.
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
Made in the USA
11
NTD Indexable Drills *Uses WCMT insert
STUBBYTM
Shank Dia Price
Solid Coolant
3/8" Ø $80.00 $95.00
1/2" Ø $85.00 $100.00
5/8" Ø $90.00 $105.00
3/4" Ø $100.00 $115.00
1" Ø $115.00 $130.00
Style
1-1/4" Ø $155.00 $175.00 CNM G STYLE R/H
1-1/2" Ø $165.00 $185.00 CNM G STYLE R/H
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
NU-HEAD TM
Replacement Head System for carbide shank boring bars
Nu-Head is the best way to repair damaged indexable boring bars. We manufacture over 150 different sizes and styles of heads to quickly and accurately restore your damaged bars.
and under
from this:
to this:
Made in the USA
12
MAGNETIC V-BLOCKS
NTM Magnetic V-Blocks are case hardened with all surfaces ground parallel and perpendicular to one another within a .0002” total tolerance. NTM also offers these Magnetic V-Blocks in matchedsets with all surfaces ground to the same size within .0002”. Frequently used in theMedical Industry, our Magnetic V-Blocks provide you with an incredibly accurate way to checksmall parts. Give your customer the best quality parts by using the most accurate Magnetic V-Blocksin the world!
part number holding capacity
#41101-90 .030” Ø - . 625” Ø #41102-90 .062”Ø - 1.250” Ø
***Matched sets available upon request! Call for pricing!
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
Made in the USA
13
SMART FLOW SWISS HOLDERS
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
SMART FLOWTM
“One Stop Tooling and Machine Shop”
Inc.
Innovation speaks loudly and NTM has captured the leadingedge of Swiss Tooling with our Patent Pending Smart Flowtool holder.This tool will not only deliver cutting oil to the tip of the insert,but will also direct a stream of oil towards the next tool station.This allows for fluid to be directed at an additional tool andkeep chips out of the work zone.NTM offers three different pocket styles. The 35°,55°and the80° in two shank sizes, the 1/2” and 5/8”.
Introducing our
Swiss Tooling System
A MUST for any Swiss Machine!
Call us TODAY!!
Check out our video onYou Tube at:http://youtu.be/bgomXmoT9ZY
Made in the USA
14
Patent Pending
SMART FLOWTM
SWISS STYLE HOLDER
SCLCR *Turning & Facing
*Uses CCMT insert
Catalog Number Shank L F H Insert Screw Insert Price
(over insert) (over insert) (over insert)
SW-SCLCR 083C 0.5 4.25 0.5 0.5 TS-4 CCMT 32.52 $150.00
SW-SCLCR 103C 0.625 4.25 0.625 0.625 TS-4 CCMT 32.52 $160.00
Item No Part Number Part Description Qty
1 see below Insert (not included) 1
2 see below Tool Holder 1
3 SW 4-40 SET SCREW 4-40 Set Screw / Plug 1
4 TS-4 M4 X .7 Insert Screw 1
5 SW 1/8-27 FITTING 1/8-27 NPT-JIC 4 1
6 SW 1/8-27 PLUG 1/8-27 NPT Set Screw Plug 1
6
5
1
4
3
2
COOLANT/OIL HOLE
SMART FLOW TM
COOLANT/OIL HOLE
Made in the USA
15
Catalog Number Shank L F H Insert Screw Insert Price
(over insert) (over insert) (over insert)
SW-SDJCR 083C 0.5 4.25 0.5 0.5 TS-4 DCMT 32.52 $150.00
SW-SDJCR 103C 0.625 4.25 0.625 0.625 TS-4 DCMT 32.52 $160.00
SDJCR *Turning & Profile
*Uses DCMT insert
Catalog Number Shank L F H Insert Screw Insert Price
(over insert) (over insert) (over insert)
SW-SVJBR 082C 0.5 4.25 0.5 0.5 MS-1153 VBMT 221 $150.00
SW-SVJBR 102C 0.625 4.25 0.625 0.625 MS-1153 VBMT 221 $160.00
SVJBR *Turning & Profile
*Uses VBMT insert
Indexable Drills
Stub length 2x diameter
STUBBYTM
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
Made in the USA
16
STUBBYTM
Stubby drills are manufactured to thehighest quality standards. They aredesigned with shorter flute lengths and shanksthat fit standard collet and endmill holders.
The shorter flute length gives Stubbydrills greater rigidity which translatesinto higher production rates and extended insert life.
Add “C” to the end of thepart number for coolantthru i.e. NTD-20C
NTD Stub length Indexable Drills *Uses WCMT insert
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
Catalog Number D L1 L Shank Dia Insert Screw Insert P rice
Solid W/C
NTD-09 9/16" Ø 1-1/2" 3" 1/2" Ø N0056040 W29.10010.04 $95.00 $130.00
NTD-10 5/8" Ø 1-1/2" 3" 1/2" Ø N0056040 W29.10010.04 $115.00 $150.00
NTD-12 3/4" Ø 1-1/2" 3" 5/8" Ø N0056040 W29.10010.04 $125.00 $160.00
NTD-14 7/8" Ø 1-3/4" 3-1/2" 3/4" Ø N0057552 W29.18010.04 $135.00 $170.00
NTD-16 1" Ø 2-1/4" 4" 3/4" Ø N0057510 W29.24010.04 $140.00 $175.00
NTD-18 1-1/8" Ø 2-3/4" 4-1/2" 1" Ø N0057510 W29.24010.04 $150.00 $185.00
NTD-20 1-1/4" Ø 2-3/4" 4-1/2" 1" Ø N0057510 W29.24010.04 $175.00 $210.00
Made in the USA
17
LAYDOWN THREAD BAR
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
NTM has now expanded the Stubby Boring Barline to include Laydown Threading Bars!
Stubby carbide Laydown Threading Barsare a high quality economical solution to yourthreading needs. They are available in three sizes (1/2”, 5/8” and 3/4”) and can accom-modate a wide variety of laydown inserts.They are now in stock ready to ship!
Call Us Today!!
Made in the USA
18
*Heavy metal shanks available, please call for quote*1-800-274-4686
LSER Laydown Thread
*Uses LT16 insert
carbide shank
“C” for solid shank“E” for coolant thru
STUBBYTM
Carbide Thread Bars
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
C08-LSER-3 0.5 5" 0.39 0.65 MS-1155 LT16 $190.00 $219.00
C10-LSER-3 0.625 7" 0.439 0.761 MS-1155 LT16 $271.00 $304.00
C12-LSER-3 0.75 7" 0.51 0.895 MS-1155 LT16 $363.00 $404.00
" D "
" L "
" F "
0°
1.5°
Made in the USA
19
Boring Bar Identification
C12-SCLCR3
Insert C 80° Diamond
D 55° Diamond
T 60° Triangle
V 35° Diamond
Insert ClampingM Multi Clamp
N Top Notch Clamp
S Screw Down
Insert Clearance
AngleC 7°
N 0°
P 11°
Bar Cut
L Left Hand
R Right Hand
Insert Size
1.5 .187 IC
1.8 .218 IC
2 .250
3 .375 IC
4 .500 IC
Bar Type
A Steel Bar w / Coolant
C Solid Carbide Bar
D Heavy Metal Bar
E Carbide Bar w / Coolant
S Steel Bar
Lead AngleF 0°
L -5°
U -3°
J -2°
Bar Ø & Length 3/16 - 5/16 4.50 oal
3/8 4.75 oal
1/2 5.00 oal
5/8 - 1.0 7.00 oal
NTM Inc.140 N.E. Liberty StMinneapolis, MN 55432phone: 763-780-1420fax: 763-780-8921
1-800-274-4686 www.ntminc.com
“One Stop Tooling and Machine Shop”
Inc.
Made in the USA
20
STUBBYTM
Made in the USA
*Heavy metal shanks available, please call for quote*1-800-274-4686
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
MCLN *Boring & Facing *Uses CNMG insert
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
MWLN *Boring & Facing *Uses WNMG insert
Carbide Boring Bars
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert Price
Solid W/C
C10-MWLNR-3 0.625 7" 0.44 0.76 CK-5/STC-5 NL-33 WNMG-322 $271.00 $304.00
C12-MWLNR/L-3 0.75 7" 0.50 0.885 CK-6/STC-5 NL-33 WNMG-322 $363.00 $404.00
C12-MWLNR-33 0.75 7" 0.50 0.885 CK-6/STC-5 NL-33 WNMG-332 $363.00 $404.00
C16-MWLNR/L-3 1 7" 0.625 1.135 CK-6/STC-5 NL-33 WNMG-322 $476.00 $532.00
C16-MWLNR-4 1 7" 0.625 1.135 CK-20/STC-11 NL-44 WNMG-432 $476.00 $532.00
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert Price
Solid W/C
C16-MCLNR/L-4 1 7" 0.625 1.135 CK-20/STC-11 NL-44 CNMG-432 $476.00 $532.00
21
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
Carbide Boring Bars
Made in the USA
22
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
SCLP *Boring & Facing *Uses CPMT insert
SCLC *Boring & Facing *Uses CCMT insert
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
C05-SCLPR/L-1.8 0.312 4-1/2" 0.219 0.385 MS-1152 CPMT-1.81.51 $160.00 $185.00
C06-SCLPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 CPMT-21.51 $160.00 $185.00
C08-SCLPR/L-2 0.5 5" 0.312 0.572 MS-1153 CPMT-21.51 $190.00 $219.00
C08-SCLPR/L-3 0.5 5" 0.312 0.572 MS-1155 CPMT-32.52 $190.00 $219.00
C10-SCLPR/L-2 0.625 7" 0.406 0.728 MS-1153 CPMT-21.51 $271.00 $304.00
C10-SCLPR/L-3 0.625 7" 0.406 0.728 MS-1155 CPMT-32.52 $271.00 $304.00
C12-SCLPR/L-3 0.75 7" 0.5 0.885 MS-1155 CPMT-32.52 $363.00 $404.00
C16-SCLPR/L-3 1 7" 0.625 1.135 MS-1155 CPMT-32.52 $476.00 $532.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
C05-SCLCR/L-2 0.312 4-1/2" 0.219 0.385 5513-020-03 CCMT-21.51 $160.00 $185.00
C06-SCLCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 CCMT-21.51 $160.00 $185.00
C08-SCLCR/L-2 0.5 5" 0.312 0.572 5513-020-03 CCMT-21.51 $190.00 $219.00
C08-SCLCR/L-3 0.5 5" 0.312 0.572 5513-020-09 CCMT-32.52 $190.00 $219.00
C10-SCLCR/L-2 0.625 7" 0.406 0.728 5513-020-03 CCMT-21.51 $271.00 $304.00
C10-SCLCR/L-3 0.625 7" 0.406 0.728 5513-020-09 CCMT-32.52 $271.00 $304.00
C12-SCLCR/L-3 0.75 7" 0.5 0.885 5513-020-09 CCMT-32.52 $363.00 $404.00
C16-SCLCR/L-3 1 7" 0.625 1.15 5513-020-09 CCMT-32.52 $476.00 $532.00
C16-SCLCR/L-4 1 7" 0.625 1.15 5513-020-17 CCMT-432 $476.00 $532.00
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
Carbide Boring Bars
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
C06-SDUPR/L-2 0.375 4-3/4" 0.375 0.572 MS-1153 DPMT-21.51 $160.00 $185.00
C08-SDUPR/L-2 0.5 5" 0.437 0.697 MS-1153 DPMT-21.51 $190.00 $219.00
C10-SDUPR/L-2 0.625 7" 0.5 0.822 MS-1153 DPMT-21.51 $271.00 $304.00
C12-SDUPR/L-3 0.75 7" 0.562 0.947 MS-1155 DPMT-32.52 $363.00 $404.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
C06-SDUCR/L-2 0.375 4-3/4" 0.375 0.572 5513-020-03 DCMT-21.51 $160.00 $185.00
C08-SDUCR/L-2 0.5 5" 0.437 0.697 5513-020-03 DCMT-21.51 $190.00 $219.00
C10-SDUCR/L-2 0.625 7" 0.5 0.822 5513-020-03 DCMT-21.51 $271.00 $304.00
C12-SDUCR/L-3 0.75 7" 0.625 1.01 5513-020-09 DCMT-32.52 $363.00 $404.00
SDUP *Boring & Facing *Uses DPMT insert
SDUC *Boring & Facing *Uses DCMT insert
Made in the USA
23
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
Carbide Boring Bars
“C” for solid shankFor coolant thru add“C” to the end of thepart number i.e.CSWLOR 123C
available under 3/8”
*Coolant thru notavailable **Heavy Metal not
Made in the USA
24
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
CSWLOR 055* 0.187 4-1/2" 0.114 0.217 TS-21 WCMT 1.21 $160.00 N/A
CSWLOR 065 0.25 4-1/2" 0.156 0.291 TS-2 WCMT 1.21 $160.00 $185.00
CSWLOR 066 0.312 4-1/2" 0.188 0.354 TS-2 WCMT 1.51.5 $160.00 $185.00
CSWLO504R 0.312 4-1/2" 0.203 0.369 TS-25 WCMT 21.5 $160.00 $185.00
CSWLOR 070 0.375 4-3/4" 0.218 0.416 TS-25 WCMT 21.5 $160.00 $185.00
CSWLOR 062 0.375 4-3/4" 0.25 0.447 TS-25 WCMT 21.5 $160.00 $185.00
CSWLOR 082 0.5 5" 0.312 0.572 TS-25 WCMT 21.5 $190.00 $219.00
CSWLOR 102 0.625 7" 0.375 0.697 TS-25 WCMT 21.5 $271.00 $304.00
CSWLOR 103 0.625 7" 0.375 0.697 TS-4 WCMT 32.5 $271.00 $304.00
CSWLOR 123 0.75 7" 0.5 0.885 TS-4 WCMT 32.5 $363.00 $404.00
SWLO *Boring & Facing *Uses WCMT insert
carbide shankCatalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
C03-SWLPR/L-1.5* 0.187 4-1/2" 0.126 0.229 MS-1438 WPMT-1.51.21 $160.00 N/A
C04-SWLPR/L-1.5 0.25 4-1/2" 0.156 0.291 MS-1438 WPMT-1.51.21 $160.00 $185.00
C05-SWLPR/L-1.5 0.312 4-1/2" 0.219 0.385 MS-1438 WPMT-1.51.21 $160.00 $185.00
C06-SWLPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 WPMT-21.51 $160.00 $185.00
C08-SWLPR/L-2 0.5 5" 0.312 0.572 MS-1153 WPMT-21.51 $190.00 $219.00
C10-SWLPR/L-3 0.625 7" 0.406 0.728 MS-1155 WPMT-32.52 $271.00 $304.00
C12-SWLPR/L-3 0.75 7" 0.5 0.885 MS-1155 WPMT-32.52 $363.00 $404.00
SWLP *Boring & Facing *Uses WPMT insert
carbide shank
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
Carbide Boring Bars
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
C06-STFCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 TCMT-21.51 $160.00 $185.00
C08-STFCR/L-2 0.5 5" 0.312 0.572 5513-020-03 TCMT-21.51 $190.00 $219.00
C10-STFCR/L-2 0.625 7" 0.406 0.728 5513-020-03 TCMT-21.51 $271.00 $304.00
C12-STFCR/L-2 0.75 7" 0.5 0.885 5513-020-03 TCMT-21.51 $363.00 $404.00
C12-STFCR/L-3 0.75 7" 0.5 0.885 5513-020-09 TCMT-32.52 $363.00 $404.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
C06-STFPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 TPMT-21.51 $160.00 $185.00
C08-STFPR/L-2 0.5 5" 0.312 0.572 MS-1153 TPMT-21.51 $190.00 $219.00
C10-STFPR/L-2 0.625 7" 0.406 0.728 MS-1153 TPMT-21.51 $271.00 $304.00
C12-STFPR/L-3 0.75 7" 0.5 0.885 MS-1155 TPMT-32.52 $363.00 $404.00
STFC *Boring & Facing *Uses TCMT insert
STFP *Boring & Facing *Uses TPMT insert
Made in the USA
25
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
Carbide Boring Bars
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
STUP *Boring & Facing *Uses TCMT insert
STUC *Boring & Facing *Uses TPMT insert
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
C06-STUPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 TPMT-21.51 $160.00 $185.00
C08-STUPR/L-2 0.5 5" 0.312 0.572 MS-1153 TPMT-21.51 $190.00 $219.00
C10-STUPR/L-2 0.625 7" 0.406 0.728 MS-1153 TPMT-21.51 $271.00 $304.00
C12-STUPR/L-3 0.75 7" 0.5 0.885 MS-1155 TPMT-32.52 $363.00 $404.00
C16-STUPR/L-3 1 7" 0.625 1.135 MS-1155 TPMT-32.52 $476.00 $532.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
C06-STUCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 TCMT-21.51 $160.00 $185.00
C08-STUCR/L-2 0.5 5" 0.312 0.572 5513-020-03 TCMT-21.51 $190.00 $219.00
C10-STUCR/L-2 0.625 7" 0.406 0.728 5513-020-03 TCMT-21.51 $271.00 $304.00
C12-STUCR/L-2 0.75 7" 0.5 0.885 5513-020-03 TCMT-21.51 $363.00 $404.00
C12-STUCR/L-3 0.75 7" 0.5 0.885 5513-020-09 TCMT-32.52 $363.00 $404.00
Made in the USA
26
*Heavy metal shanks available, please call for quote*1-800-274-4686
STUN *Boring & Facing *Uses TP insert
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
STUBBYTM
Carbide Boring Bars
CTFP *Boring & Facing *Uses TPG insert
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
C06-STUNR/L-2 0.375 4-3/4" 0.25 0.447 S-930 T-221P $160.00 $185.00
C08-STUNR/L-2 0.5 5" 0.312 0.572 S-930 T-221P $190.00 $219.00
C10-STUNR/L-2 0.625 7" 0.406 0.728 S-930 T-221P $271.00 $304.00
C12-STUNR/L-3 0.75 7" 0.5 0.885 S-944 T-321P $363.00 $404.00
C16-STUNR/L-3 1 7" 0.625 1.135 S-944 T-321P $476.00 $532.00
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert Price
Solid W/C
C08-CTFPR/L-2 0.5 5" 0.312 0.572 CK-27 / STC-27 TPG-221 $190.00 $219.00
C10-CTFPR/L-2 0.625 7" 0.406 0.728 CK-19 / STC-9 TPG-221 $271.00 $304.00
C12-CTFPR/L-3 0.75 7" 0.5 0.885 CK-7 / STC-9 TPG-322 $363.00 $404.00
C16-CTFPR/L-3 1 7" 0.625 1.135 CK-20 / STC-11 TPG-322 $476.00 $532.00
Made in the USA
27
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shankFor coolant thru add“C” to the end of thepart number i.e.CSTJOR 123C
STJO *Boring & Facing *Uses TPGT insert
“C” for solid shank“E” for coolant thru
NER *Thread & Groove *Uses NG insert
Carbide Boring Bars
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
CSTJOR/L 062 0.375 4-3/4" 0.25 0.447 BHF0306R TPGP-220 $160.00 $185.00
CSTJOR/L 082 0.5 5" 0.312 0.572 BHF0308R TPGP-220 $190.00 $219.00
CSTJOR/L 102 0.625 7" 0.375 0.697 BHF0308R TPGP-220 $271.00 $304.00
CSTJOR/L 123 0.75 7" 0.5 0.885 BFTX0410A TPGP-330 $363.00 $404.00
carbide shankCatalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert Price
Solid W/C
C08-NEL2 0.5 5" 0.437 0.697 CM-74 / S-310 NG-2R $209.00 $241.00
C10-NEL2 0.625 7" 0.5 0.822 CM-74 / S-310 NG-2R $281.00 $314.00
C12-NEL2 0.75 7" 0.562 0.947 CM-74 / S-310 NG-2R $371.00 $413.00
C08-NER2 0.5 5" 0.437 0.697 CM-75 / S-310 NG-2L $209.00 $241.00
C10-NER2 0.625 7" 0.5 0.822 CM-75 / S-310 NG-2L $281.00 $314.00
C12-NER2 0.75 7" 0.562 0.947 CM-75 / S-310 NG-2L $371.00 $413.00
Made in the USA
28
STUBBYTM
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Carbide Boring Bars
carbide shank
“C” for solid shank“E” for coolant thru
NKLC *PROFILE *Uses NPG insert
carbide shank
“C” for solid shank“E” for coolant thru
NELL *PROFILE *Uses NPG insert
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert Price
Sol id W/C
C08-NELL05 0.5 5" 0.375 0.67 CM-105 / S-518 NPGR-51R $209.00 $241.00
C10-NELL05 0.625 7" 0.5 0.87 CM-71 / S-524 NPGR-51R $281.00 $314.00
C12-NELL05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51R $371.00 $413.00
C08-NELR05 0.5 5" 0.375 0.67 CM-106 / S-518 NPGR-51L $209.00 $241.00
C10-NELR05 0.625 7" 0.5 0.87 CM-79 / S-524 NPGR-51L $281.00 $314.00
C12-NELR05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51L $371.00 $413.00
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert Price
Solid W/C
C08-NKLCL05 0.5 5" 0.375 0.67 CM-105 / S-518 NPGR-51R $209.00 $241.00
C10-NKLCL05 0.625 7" 0.5 0.87 CM-71 / S-524 NPGR-51R $281.00 $314.00
C12-NKLCL05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51R $371.00 $413.00
C08-NKLCR05 0.5 5" 0.375 0.67 CM-106 / S-518 NPGR-51L $209.00 $241.00
C10-NKLCR05 625 7" 0.5 0.87 CM-79 / S-524 NPGR-51L $281.00 $314.00
C12-NKLCR05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51L $371.00 $413.00
Made in the USA
29
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
steel shank
“R” for right hand bar“L” for left hand bar
MCLN *Boring & Facing *Uses CNMG insert
steel shank
“R” for right hand bar“L” for left hand bar
“S” for solid shank“A” for coolant thru
MWLN *Boring & Facing *Uses WNMG insert
Steel Boring Bars
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert Price
Solid W/C
S10-MWLNR-3 0.625 7" 0.44 0.76 CK-5/STC-5 NL-33 WNMG-322 $104.00 $121.00
S12-MWLNR/L-3 0.75 7" 0.50 0.885 CK-6/STC-5 NL-33 WNMG-322 $116.00 $134.00
S12-MWLNR-33 0.75 7" 0.50 0.885 CK-6/STC-5 NL-33 WNMG-332 $116.00 $134.00
S16-MWLNR/L-3 1 7" 0.625 1.135 CK-6/STC-5 NL-33 WNMG-322 $146.00 $164.00
S16-MWLNR-4 1 7" 0.625 1.135 CK-20/STC-11 NL-44 WNMG-432 $146.00 $164.00
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert Price
Solid W/C
S16-MCLNR/L-4 1 7" 0.625 1.135 CK-20/STC-11 NL-44 CNMG-432 $146.00 $164.00
“S” for solid shank“A” for coolant thru
Made in the USA
30
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
Steel Boring Bars
“S” for solid shank“A” for coolant thru
Made in the USA
31
steel shank
“R” for right hand bar“L” for left hand bar
“S” for solid shank“A” for coolant thru
“R” for right hand bar“L” for left hand bar
SCLP *Boring & Facing *Uses CPMT insert
SCLC *Boring & Facing *Uses CCMT insert
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
S05-SCLPR/L-1.8 0.312 4-1/2" 0.219 0.385 MS-1152 CPMT-1.81.51 $85.00 $104.00
S06-SCLPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 CPMT-21.51 $85.00 $104.00
S08-SCLPR/L-2 0.5 5" 0.312 0.572 MS-1153 CPMT-21.51 $92.00 $109.00
S08-SCLPR/L-3 0.5 5" 0.312 0.572 MS-1155 CPMT-32.52 $92.00 $109.00
S10-SCLPR/L-2 0.625 7" 0.406 0.728 MS-1153 CPMT-21.51 $104.00 $121.00
S10-SCLPR/L-3 0.625 7" 0.406 0.728 MS-1155 CPMT-32.52 $104.00 $121.00
S12-SCLPR/L-3 0.75 7" 0.5 0.885 MS-1155 CPMT-32.52 $116.00 $134.00
S16-SCLPR/L-3 1 7" 0.625 1.135 MS-1155 CPMT-32.52 $146.00 $164.00
steel shankCatalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
S05-SCLCR/L-2 0.312 4-1/2" 0.219 0.385 5513-020-03 CCMT-21.51 $85.00 $104.00
S06-SCLCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 CCMT-21.51 $85.00 $104.00
S08-SCLCR/L-2 0.5 5" 0.312 0.572 5513-020-03 CCMT-21.51 $92.00 $109.00
S08-SCLCR/L-3 0.5 5" 0.312 0.572 5513-020-09 CCMT-32.52 $92.00 $109.00
S10-SCLCR/L-2 0.625 7" 0.406 0.728 5513-020-03 CCMT-21.51 $104.00 $121.00
S10-SCLCR/L-3 0.625 7" 0.406 0.728 5513-020-09 CCMT-32.52 $104.00 $121.00
S12-SCLCR/L-3 0.75 7" 0.5 0.885 5513-020-09 CCMT-32.52 $116.00 $134.00
S16-SCLCR/L-3 1 7" 0.625 1.15 5513-020-09 CCMT-32.52 $146.00 $164.00
S16-SCLCR/L-4 1 7" 0.625 1.15 5513-020-17 CCMT-432 $146.00 $164.00
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
steel shank
“R” for right hand bar“L” for left hand bar
“S” for solid shank“A” for coolant thru
steel shank
“R” for right hand bar“L” for left hand bar
Steel Boring Bars
SDUP *Boring & Facing *Uses DPMT insert
SDUC *Boring & Facing *Uses DCMT insert
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-SDUPR/L-2 0.375 4-3/4" 0.375 0.572 MS-1153 DPMT-21.51 $85.00 $104.00
S08-SDUPR/L-2 0.5 5" 0.437 0.697 MS-1153 DPMT-21.51 $92.00 $109.00
S10-SDUPR/L-2 0.625 7" 0.5 0.822 MS-1153 DPMT-21.51 $104.00 $121.00
S12-SDUPR/L-3 0.75 7" 0.562 0.947 MS-1155 DPMT-32.52 $116.00 $134.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-SDUCR/L-2 0.375 4-3/4" 0.375 0.572 5513-020-03 DCMT-21.51 $85.00 $104.00
S08-SDUCR/L-2 0.5 5" 0.437 0.697 5513-020-03 DCMT-21.51 $92.00 $109.00
S10-SDUCR/L-2 0.625 7" 0.5 0.822 5513-020-03 DCMT-21.51 $104.00 $121.00
S12-SDUCR/L-3 0.75 7" 0.625 1.01 5513-020-09 DCMT-32.52 $116.00 $134.00
“S” for solid shank“A” for coolant thru
Made in the USA
32
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
“R” for right hand bar“L” for left hand bar
“S” for solid shank“A” for coolant thru
Steel Boring Bars
SWLO *Boring & Facing *Uses WCMT insert
steel shank
SWLP *Boring & Facing *Uses WPMT insert
“S” for solid shankFor coolant thru add“C” to the end of thepart number i.e.S-SWLOR 123C
available under 3/8”
*Coolant thru notavailable **Heavy Metal not
steel shankCatalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
S-SWLOR 070 0.375 4-3/4" 0.218 0.416 TS-25 WCMT 21.5 $85.00 $104.00
S-SWLOR 062 0.375 4-3/4" 0.25 0.447 TS-25 WCMT 21.5 $85.00 $104.00
S-SWLOR 082 0.5 5" 0.312 0.572 TS-25 WCMT 21.5 $92.00 $109.00
S-SWLOR 102 0.625 7" 0.375 0.697 TS-25 WCMT 21.5 $104.00 $121.00
S-SWLOR 103 0.625 7" 0.375 0.697 TS-4 WCMT 32.5 $104.00 $121.00
S-SWLOR 123 0.75 7" 0.5 0.885 TS-4 WCMT 32.5 $116.00 $134.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-SWLPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 WPMT-21.51 $85.00 $104.00
S08-SWLPR/L-2 0.5 5" 0.312 0.572 MS-1153 WPMT-21.51 $92.00 $109.00
S10-SWLPR/L-3 0.625 7" 0.406 0.728 MS-1155 WPMT-32.52 $104.00 $121.00
S12-SWLPR/L-3 0.75 7" 0.5 0.885 MS-1155 WPMT-32.52 $116.00 $134.00
Made in the USA
33
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
Steel Boring Bars
steel shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
STFC *Boring & Facing *Uses TCMT insert
STFP *Boring & Facing *Uses TPMT insert
steel shank
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-STFCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 TCMT-21.51 $85.00 $104.00
S08-STFCR/L-2 0.5 5" 0.312 0.572 5513-020-03 TCMT-21.51 $92.00 $109.00
S10-STFCR/L-2 0.625 7" 0.406 0.728 5513-020-03 TCMT-21.51 $104.00 $121.00
S12-STFCR/L-2 0.75 7" 0.5 0.885 5513-020-03 TCMT-21.51 $116.00 $134.00
S12-STFCR/L-3 0.75 7" 0.5 0.885 5513-020-09 TCMT-32.52 $116.00 $134.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-STFPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 TPMT-21.51 $85.00 $104.00
S08-STFPR/L-2 0.5 5" 0.312 0.572 MS-1153 TPMT-21.51 $92.00 $109.00
S10-STFPR/L-2 0.625 7" 0.406 0.728 MS-1153 TPMT-21.51 $104.00 $121.00
S12-STFPR/L-3 0.75 7" 0.5 0.885 MS-1155 TPMT-32.52 $116.00 $134.00
Made in the USA
34
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
Steel Boring Bars
steel shank
“R” for right hand bar“L” for left hand bar
“S” for solid shank“A” for coolant thru
“R” for right hand bar“L” for left hand bar
STUP *Boring & Facing *Uses TCMT insert
STUC *Boring & Facing *Uses TPMT insert
steel shank
“S” for solid shank“A” for coolant thru
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-STUPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 TPMT-21.51 $85.00 $104.00
S08-STUPR/L-2 0.5 5" 0.312 0.572 MS-1153 TPMT-21.51 $92.00 $109.00
S10-STUPR/L-2 0.625 7" 0.406 0.728 MS-1153 TPMT-21.51 $104.00 $121.00
S12-STUPR/L-3 0.75 7" 0.5 0.885 MS-1155 TPMT-32.52 $116.00 $134.00
S16-STUPR/L-3 1 7" 0.625 1.135 MS-1155 TPMT-32.52 $146.00 $164.00
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-STUCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 TCMT-21.51 $85.00 $104.00
S08-STUCR/L-2 0.5 5" 0.312 0.572 5513-020-03 TCMT-21.51 $92.00 $109.00
S10-STUCR/L-2 0.625 7" 0.406 0.728 5513-020-03 TCMT-21.51 $104.00 $121.00
S12-STUCR/L-2 0.75 7" 0.5 0.885 5513-020-03 TCMT-21.51 $116.00 $134.00
S12-STUCR/L-3 0.75 7" 0.5 0.885 5513-020-09 TCMT-32.52 $116.00 $134.00
Made in the USA
35
*Heavy metal shanks available, please call for quote*1-800-274-4686
STUN *Boring & Facing *Uses TP insert
steel shank
“R” for right hand bar“L” for left hand bar
“S” for solid shank“A” for coolant thru
steel shank
“R” for right hand bar“L” for left hand bar
STUBBYTM
Steel Boring Bars
CTFP *Boring & Facing *Uses TPG insert
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert P rice
Solid W/C
S06-STUNR/L-2 0.375 4-3/4" 0.25 0.447 S-930 T-221P $85.00 $104.00
S08-STUNR/L-2 0.5 5" 0.312 0.572 S-930 T-221P $92.00 $109.00
S10-STUNR/L-2 0.625 7" 0.406 0.728 S-930 T-221P $104.00 $121.00
S12-STUNR/L-3 0.75 7" 0.5 0.885 S-944 T-321P $116.00 $134.00
S16-STUNR/L-3 1 7" 0.625 1.135 S-944 T-321P $146.00 $164.00
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert Price
Solid W/C
S08-CTFPR/L-2 0.5 5" 0.312 0.572 CK-27 / STC-27 TPG-221 $92.00 $109.00
S10-CTFPR/L-2 0.625 7" 0.406 0.728 CK-19 / STC-9 TPG-221 $104.00 $121.00
S12-CTFPR/L-3 0.75 7" 0.5 0.885 CK-7 / STC-9 TPG-322 $116.00 $134.00
S16-CTFPR/L-3 1 7" 0.625 1.135 CK-20 / STC-11 TPG-322 $146.00 $164.00
“S” for solid shank“A” for coolant thru
Made in the USA
36
STUBBYTM
*Heavy metal shanks available, please call for quote*1-800-274-4686
steel shank
“R” for right hand bar“L” for left hand bar
“S” for solid shankFor coolant thru add“C” to the end of thepart number i.e.S-STJOR 123C
STJO *Boring & Facing *Uses TPGT insert
steel shank
“S” for solid shank“A” for coolant thru
NER *Thread & Groove *Uses NG insert
Steel Boring Bars
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert Price
Solid W/C
S-STJOR/L 062 0.375 4-3/4" 0.25 0.447 BHF0306R TPGP-220 $85.00 $104.00
S-STJOR/L 082 0.5 5" 0.312 0.572 BHF0308R TPGP-220 $92.00 $109.00
S-STJOR/L 102 0.625 7" 0.375 0.697 BHF0308R TPGP-220 $104.00 $121.00
S-STJOR/L 123 0.75 7" 0.5 0.885 BFTX0410A TPGP-330 $116.00 $134.00
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert Price
Solid W/C
S08-NEL2 0.5 5" 0.437 0.697 CM-74 / S-310 NG-2R $97.00 $116.00
S10-NEL2 0.625 7" 0.5 0.822 CM-74 / S-310 NG-2R $109.00 $128.00
S12-NEL2 0.75 7" 0.562 0.947 CM-74 / S-310 NG-2R $121.00 $140.00
S08-NER2 0.5 5" 0.437 0.697 CM-75 / S-310 NG-2L $97.00 $116.00
S10-NER2 0.625 7" 0.5 0.822 CM-75 / S-310 NG-2L $109.00 $128.00
S12-NER2 0.75 7" 0.562 0.947 CM-75 / S-310 NG-2L $121.00 $140.00
Made in the USA
37
STUBBYTM
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Steel Boring Bars
steel shank
NKLC *PROFILE *Uses NPG insert
steel shank
“S” for solid shank“A” for coolant thru
NELL *PROFILE *Uses NPG insert
“S” for solid shank“A” for coolant thru
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert P rice
Solid W/C
S08-NELL05 0.5 5" 0.375 0.67 CM-105 / S-518 NPGR-51R $97.00 $116.00
S10-NELL05 0.625 7" 0.5 0.87 CM-71 / S-524 NPGR-51R $109.00 $128.00
S12-NELL05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51R $121.00 $140.00
S08-NELR05 0.5 5" 0.375 0.67 CM-106 / S-518 NPGR-51L $97.00 $116.00
S10-NELR05 0.625 7" 0.5 0.87 CM-79 / S-524 NPGR-51L $109.00 $128.00
S12-NELR05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51L $121.00 $140.00
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert Price
Solid W/C
S08-NKLCL05 0.5 5" 0.375 0.67 CM-105 / S-518 NPGR-51R $97.00 $116.00
S10-NKLCL05 0.625 7" 0.5 0.87 CM-71 / S-524 NPGR-51R $109.00 $128.00
S12-NKLCL05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51R $121.00 $140.00
S08-NKLCR05 0.5 5" 0.375 0.67 CM-106 / S-518 NPGR-51L $97.00 $116.00
S10-NKLCR05 625 7" 0.5 0.87 CM-79 / S-524 NPGR-51L $109.00 $128.00
S12-NKLCR05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51L $121.00 $140.00
Made in the USA
38
Ship to:
NTM, Inc151 Longfellow Street N.E.
Minneapolis, MN 55432010118-A