Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
“LUXE POOLS” – The Quality Pools
Luxe cover
Installation manual
2016
1
“Luxe cover” automated pool covering
Content
1. General instructions......................................................... 2
2. Assembly kit................................................................ 3
3. Installation instruction.................................................... 4
4. Power supply............................................................... 7
5. Motorisation................................................................ 8
6. Control panel and programming........................................... 14
7. The water level in the pool.............................................. 19
8. Slats cleaning…………...................................................... 19
9. Safety......................................................................... 19
“Luxe cover” automated pool covering
1. General instructions
Benefits of using a “Luxe cover” inside the pool:
Reduces pool water evaporation
Saves up to 60% on heating costs
Extends swimming season
Reduce consumption of chemical products
Helps to prevent any algae formation in the pool
Protects children and pets from accidental intrusion.
Fully compatible with our composite pools
Swimming pool enclosing slats are wrapped in roll. The cover roll is mounted in a niche at the
top of the swimming pool and it is fully integrated into the pool. An optional underwater panel in
fiberglass is available. Swimming pool cover is controlled automatically using electric drive.
► ATENTION During installation slats can’t be on sun – sun will damage the structure of slats. During
installation on sunshine we recommend to place slats directly to water in order to transfer the heat
into water.
► ATENTION Do not climb on the cover at the time when the pool is covered or uncovered. The coating can
be damaged by sharp or hot objects. Do not cover the swimming pool if people are in the water.
3
2. Assembly kit
4
3. Installation instruction
First you need to attach the brackets- left and right side plates to the pool shell and join drive
system. Brackets are attaching with bolts, so you must bore shell of the pool.
Scheme No.1
5
3.1. Install side plates in a pool shell, then attach it to the axle. Check alignment (the axle must be
perfectly perpendicular to the length of the pool).
Scheme No.2
6
3.2. Fix transversal beam on the poolside (4): drill holes and tighten stainless steel bolts (7)
Scheme No.3
7
3.3. Straps (9) are connecting to the slats. Cut an opening in first slat– using a knife – 2 cm wider
than the straps (1 cm of each side). Loop the straps through the slats opening and secure together.
Scheme No.4
3.4. Mount deck box (9) outside the pool board, and commutate control and power cabel from
built-in motor (2) with cable from the control panel (10). Deck box protection class can not be less
than IP67.
3.5. Mount the fiberglass dividing wall and cover the shaft with terrace board.
Scheme No.5
4. Power supply
Electricity supply for pool equipment and „Luxe cover“ rewind mechanism must be provided
with protective equipment that is intended for increased humidity environment (automatic circuit
breakers). Installation safety inspection must be carried out every six months.
8
5. Motorisation
This Luxe cover motorization (1) is intended to drive the swimming-pool covers with immerged axis
automatically.
It ensures the following functions:
- puts the rotating axis into motion
- maintains the axis in stop position when not working
It corresponds to a pool of 6 x 12m.
This „Luxe cover“ motorization builds in an electronic rev counter card. When linked to the Luxe
cover control panel (11), this sensor allows the automatic working of the cover after the teaching
phase.
This motorization has been designed to be connected to a Luxe cover (11) control panel.
The integration of the motorization by „Luxe Pools“ in an automatic cover deck for swimming-pool
applications complies with the recommendations of the product norms NFP 90-308 and is compatible
with the certification of the standard NFP 90-308.
5.1. Security instructions
- All work on the electrical installation has to be done by a qualified, specialized and authorized
electrician.
- During the mounting, ensure that the cable of the electrical supply cannot be damaged. In case of
damage, only the manufacturer is authorized to replace it.
- Protect the electrical connections from humidity
- In case of drilling of the rolling axis, never drill in the gear motor area.
5.2. Description.
5.2.1. Limits of use
· The maximum length of axis for a unique motorization is 6 meters.
· The length of the pool should not exceed 12meters + the stairs.
· The average using conditions are:
· 4 cycles opening/closing per day
· 4 months per year
· In nominal load condition, the product will not work more than 6 minutes per hour
· Working temperatures : between +10°C and +40°C
· The product is intended to be immerged in a place that corresponds to the normal using standards for
swimmingpools.
5.2.2. Using restraints
The control of the motorization is submitted to the respect of the following instructions by the user:
Absence of obstacles, objects or persons in the pool that could prevent the cover from rolling or
unrolling (ice, swimmer, robot, pipe, toy).
► ATENTION Unlock the fastening system (16) of the cover before any operation!!!
The water level must be maintained in the normal working area of the “skimmer” to allow the cover to
go through the gap below the grating beam and over the separation wall.
10
11
12
13
14
6. Control panel and programming
15
16
17
18
19
7. The water level in the pool
The water level in the pool is supported at the middle of the skimmer throat (about 13-14cm) below the
board. In case of insufficient water level pool cover mechanism may not work properly, and slats
getting stuck to the pool walls. Using the pool, it is important to monitor the water level, and if
necessary, add to the pool water.
8. “Luxe cover” slats cleaning
Swimming pool cleaning equipment is used floor pool wall cleaning also suitable for Luxe cover slats
(8) cleaning. Manual cleaning unit consists of:
Brush "Deluxe" with a telescopic handle and the vacuum hose;
Manual rough brush to clean the walls;
Liquid cleaner "Randfix" or "Super decalcit” (Bayrol)
9. Safety
Only use the pool if the cover is completely open. Never set the cover of flats in motion if there
are still people in the swimming pool.
Only open the Control panel (11) in a dry environment with dry hands, because of the danger
of an electrical impact.
Pool cover is developed to be used in a combination of a complete system. The installer must
guarantee that the whole system complies with the applicable instructions concerning safety.
The manufacturer excludes each liability for accidents that might be the consequence of an
incorrect or improper use of the pool cover and or the installation.
Inspect the not broken slats, which was filled with water. In case of mechanical damage is
necessary to replace them.
► ATENTION During installation slats (8) can’t be on sun – sun will damage the structure of slats. During
installation on sunshine we recommend to place slats directly to water in order to transfer the heat
into water.
► ATENTION Do not climb on the cover at the time when the pool is covered or uncovered. The coating can
be damaged by sharp or hot objects. Do not cover the swimming pool if people are in the water.
► ATENTION Unlock the fastening system (16) of the cover before any operation!!!
„Luxe Pools“ Europe
Phone: 00 33 (0) 601 105 389
E-mail: [email protected]