Anzor's Glass Clamps for Balustrading

DIVIDER INSERT HERE:

glass clamps for balustrading

glass clamps for balustrading

glass clam

ps

for b

alustrad

ing

61Online catalogue: www.anzor.co.nz/arch

D-Shaped

With Countersunk Screw

Top Hat

ANzoR GlASS ClAmpS foR BAluSTRADING

ANzoR 22

Anzor Architectural has a range of quality glass clamps to enhance your glass balustrading designs.

ANzoR 23Square Shaped

ANzoR STAND-off

ANzoR STAND-off

GlASS ClAmpS foR BAluSTRADING

pAGE 65

pAGE 65

pAGE 62

pAGE 62

Online catalogue: www.anzor.co.nz/glass-clamps

pS1 Available on request - for more information visit www.anzor.co.nz/arch/producer-statements


D-Shaped

Square Shaped

BENEfITS

RESEARCHED - Developed in conjunction with leading NZ glass companies.

pRoDuCER STATEmENT - Clamps have been tested with Producer Statements available.

QuAlITY mATERIAlS - 316 Stainless Steel (test certificates available - request before purchase).

- The stainless steel is passivated to improve corrosion resistance.

- Safety pins are Nylon, to avoid shattering glass.

- Rubber seals are EPDM, offering higher U.V. resistance.

STRENGTH CERTIfICATES - Available for pull-apart load.

SAfETY pINS - Positioned so that the distance from the edge of the glass to the edge of the glass safety pin hole is at least double the thickness of the glass. Made - Made of Nylon to reduce the chance of the glass breaking.

ANzoR 22

ANzoR 23

GlASS SIzE: 8mm, 10mm, 12mm glass (specific clamps for each glass size).

foR TuBE SIzES: 1-½” tube, 2” tube, and flat or square section.

fINISH: Mirror (for coastal environments) or Satin.

ClEANING - Glass Clamps require regular cleaning. Anzor recommends applying Prolan to reduce the chance of tea staining. See p.21 for further details.

pS1 Available on request - for more information visit www.anzor.co.nz/arch/producer-statements

ANzoR 22 & 23 GlASS ClAmpS


EX-SToCK SuBJECT To pRIoR

SAlE


1200

mm

max

- h

eig

ht

to t

op

of

gla

ss

MAXIMUM = 150mm, OR desired clamp spacing divided by 4, whichever is the least.

800m

m M

ax. C

lam

p S

pac

ing

1100

mm

MA

XIM

UM

POST SPACING - Between 1.9m-3.8m - refer to table below

ANzoR 22 & 23 INSTAllATIoN

Glass Panel Complying with

AS 1288

INSTAllATIoN: Use the Anzor Allen Key to install and avoid iron contamination.

Notes to drawingThe Anzor Glass Clamps M10 and M12 (22 and 23) can be used for the post spacings in the table below and the clamp spacing’s shown in the above drawing for a maximum wind speed of 50 m/s (“very high” wind as per NZS 3604).

This drawing does not consider:• The design of the glass panel itself (this must be

in accordance with NZS 4223 or as specifically designed by others.

• The design of the posts or their supports.

load Categorymax post spacing based on Glass Clamp capacity only

A,B,C3 AND E0.75 kN/m TO TOP EDGE0.6 kN CONC lOAD1 kPa UNIfORM fACE lOAD

3.8m

C1, C2 AND D1.5 kN/m TO TOP EDGE1.5 kN CONC lOAD1.5 kPa UNIfORM fACE lOAD(NOT SUBJECT TO OVER CROWDING)

1.9m

installed into an m8 SSThreaded Insert - flanged. Product code: NSSfM08S

REQuIRES: m8 x 20 316 Small Head CapscrewProduct code: SSHCM608020GC

full drawings in Producer Statement, available on request.

Date drawn: 22-9-10

ANzoR 22 & 23 INSTAllATIoN

MAXIMUM = 150mm, OR desired clamp spacing divided by 4, whichever is the least.


posts designed by others

Contractor: Metalmorphic, Wellington.


mATERIAl: 316 Stainless Steel, Passivated for improved corrosion resistance.

fINISH: Satin or Mirror (for more corrosive environments).

foR GlASS SIzES: 8mm, 10mm, and 12mm.

foR TuBE SIzES: 1-½” or 2” or flat/Square Tube (NB: 1-1/2” not available in 12mm).

BENEfITS: Quality materials, reasonably priced, Producer Statement available on request.

fIXING To TuBE:m8 x 20 316 small head capscrew.Product code: SSHCM608020GC

installed into an m8 SS threaded insert - flanged. Product code: NSSfM08S

ANzoR 22 & 23 SpECIfICATIoNS

fIXING To TuBE:m8 x 20 316 small head capscrew.Product code: SSHCM608020GC

installed into an m8 SS threaded insert - flanged. Product code: NSSfM08

Ø8.2

55

Glass Thickness

8mm AAGC122308Q

10mm AAGC122310Q

12mm AAGC122312Q

ANzoR 23 - ClAmpS To fASTEN GlASS To SQuARE TuBE

55 (8/10mm)

67 (12mm)

28

25

16

Ø6

Glass Thickness

8mm AAGC122208Q

10mm AAGC122210Q

12mm AAGC122212Q

ANzoR 22 - ClAmpS To fASTEN GlASS To SQuARE TuBE

6333.5

23

16

Ø6

25 f

or

12m

m

Ø8.2

45

ANzoR 23 - ClAmpS To fASTEN GlASS To RouND TuBE

Ø8.2

5562 for 12m

m

6333.516

Ø6

63

45 Ø8.2

33.5

23

16

Ø68mm & 10mm 12mm

11 13

for Tube

Glass Thickness

8mm 10mm 12mm

1-½” AAGC12220838 AAGC12221038

2” AAGC12220851 AAGC12221051 AAGC12221251

Tube Glass Thickness

8mm 10mm 12mm

1-½” AAGC12230838 AAGC12231038

2” AAGC12230851 AAGC12231051 AAGC12231251

ANzoR 22 - ClAmpS To fASTEN GlASS To RouND TuBE

55

28

25

16

Ø68mm & 10mm

11

67

28

25

18

Ø6

13

12mm

25



ANzoR STAND-off

ANzoR STAND-off

Top Hat

With Csk Screw

mATERIAl: 316 Stainless SteelfINISH: Electropolish - offering increased corrosion resistance.

fIXING mATERIAlS: Timber, Steel & Concrete.

Includes 2x Nylon washers - installation fasteners sold separately.

producer Statement for standard sizes: PS1 available on request for further info visit www.anzor.co.nz/arch/producer-statements

50mm

25mm 12mm

30mm 6mm

50mm

Product Code: AGCAD050THE

Product Code: AGCAD050E

CuSTom ClAmpS We can customise the clamp’s dimensions to your requirements.

longer stand off? Only need the front face?

CoNTACT uS ToDAY!

Custom options

AVAILABLE ON REQUEST

STAND-off GlASS ClAmpS

ANzoR STAND-off GlASS ClAmpS- standard or custom-made available



SAlE


SAlE


1100

mm

400mm Typ.

DECK lEVEl

50mm min 100 max.

100mm min.

Minimum 3/ pair of fixings per glass panel

(130mm for lagscrews to Timber)

STAND-off INSTAllATIoN

50mm

Notes to drawing• The fixings shown can be used with the above

baluster dimensions for the following loads.

live loads for building occupancy categories A, B, E and C3 as per AS/NZS 1170.1:2002

Top edge loadings up to 0.75kN/m (horizontal & vertical) and 0.6kN (concentrated). Infill up to 1.0kPa (horizontal) and 0.5kN

(concentrated).

Wind loads - `very high’ wind speed 50 m/s MAXIMUM as to NZS 3604: 1999.

• Glass balustrade to be designed by others as to . NZS 4223.

• This design only considers the allowable capacity of the associated Anzor fixings. The drawings and the design does not include the deck structure capacity to resist rotation and will need to be designed using the appropriate standards.

• All fixings to be stainless steel.

GlASS PANEl BY OTHERS COMPlYING WITH NZS 4223

Internal Stand-off Glass Balustradeby Bay Trenz ltd - Mt Maunganui

50mm min. EDGE DIST

full drawings in Producer Statement - available on request.



67Online catalogue: www.anzor.co.nz/glass-clamps

m10 lagscrew Spacing 130mm max.

Edge timber and fixings to prevent rotation by others.

90 minWashers on either

side of glass.

40 min

100 min

Anzor Stand-Off Glass Clamp.

Nylon Bush

30 min

50 min

Washers on either side of glass.

100 min


Nylon Bush


100 min


Nylon Bush

60 min

60 min

30 min30 min

50 min

Steel Edge Beam, designed by others.Nut

Timber Decking max thickness of 35mm

m10 Stud Spacing

400mm max.

fIXING To STEEl fRAmING fIXING To CoNCRETE DECKING

fIXING To TImBER DECKING WITH lAGSCREWS

Concrete decking designed by others.

STAND-off INSTAllATIoNStand-Off Glass Clamps can be fixed to timber decking, steel framing,

and concrete decking


40 min

100 min


Nylon Bush

Edge timber and fixings to prevent rotation by others.

90 min

30 min

50 min m10 Threaded Stud To suit Stand-Off connector.

Spacing 400mm max

50 x 50 x 3mm Washer&Nut

fIXING To TImBER DECKING WITH STuDS

m10 Threaded Stud drilled 80mm min. into concrete flooring and epoxied with fischer fIS V Injection System or similar See p.132 for fischer range.

Spacings Sh = 400mm max. Edge distances to comply with manufacturer’s recommendations.

check on site

m10 Threaded

Stud See above for more details.

Timber Decking max Thickness of 35mm

check on site

Timber Decking max thickness of 35mm

check on site

Glass by others.Glass by others.

Glass by others. Glass by others.


Photos by Bay Trenz ltd - Mt Maunganui

Documents

Anzor's Glass Clamps for Balustrading