Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
STEP UP TO FUJI
AUTOMATION
ANW3500HM3400
FUJI Milling HM-3400 + Twin Turning ANW-3500This Fuji cell is capable of machining a complete workpiece, including milling, drilling, threading, grooving, boring and turning in a single line set-up, unmanned.
ANW-3500 Fully Automated Twin Spindle Lathe• Built-in FUJI L292L swing arm robot• Dual spindles for front and back machining• Increase productivity - perform interrupted and finish cuts simultaneously• Hardened and ground box way construction• 90º bed for excellent chip flow• Auxiliary loader for faster load/unload• Optional dual tailstock
HM-3400 Milling Machine (optimized to integrate)A powerful milling cell capable of 5-face machining in a single chucking. Combine with a turning cell for increased throughput and reduced cost per piece.
• Built-in FUJI L292H swing arm robot or L673H gantry loader model• Simultaneous 4-axis control• Live tool spindles mounted on turret• Angle hole machining capability on B-axis with a fixed angle axial holder• Select from 6, 10, or 15 position turret
www.fujimachine.com
ANW-3500 Specifications
• Takt Time - 57 Sec. • .OP-10 Face & Center Milling • . OP20A/OP20B Complete Turning Between Center
Recommended Work Size Dia. 250 x 110mm (9.8 x 4.3in)
Spindle Diameter 100mm (3.9in)
Spindle Nose A2-6 (A2-8 Optional)
Spindle Bore Dia. 56mm (2.2in)
Spindle Speed Max. 3500 rpm
Spindle Motor 15/18.5kw (20/25hp)
No. of Tool Stations 8 + 8
Turret Index Time 0.4sec.
Turret Mechanism Cam
Chuck Size 8 - 10in
CNC Control FANUC 0i-TD
Slide Stroke: X-axis 225mm (8.86in)
Slide Stroke: Z-axis 405mm (15.94in)
Feed Motor: X-axis 3.0kw (4.0hp)
Feed Motor: Z-axis 3.0kw (4.0hp)
ROBOT SPECIFICATIONS:
Robot L292-L
Carrying Capacity 7 + 7kg (15 + 15lbs)
Robot Controller MAX SP1
HM-3400 Specifications
Recommended Work Size Dia. 300 x 120mm (11.8 x 4.7in)
C-Axis Spindle Dia. 80mm (3.15in)
C-Axis Spindle Nose A2-6 (A2-8 Optional)
No. of Tool Stations 6, 10, 15
Turret Index Time 1.5sec.
Turret Mechanism Three Piece Coupling
Chuck Size 10in
CNC Control FANUC 0i-MB
Slide Stroke: X-axis 275mm (10.83in)
Slide Stroke: Z-axis 400mm (15.75in)
Slide Stroke: Y-axis 230mm (9.06in)
Feed Motor: X-axis 3.0kw (4.0hp)
Feed Motor: Z-axis 3.0kw (4.0hp)
Feed Motor: Y-axis 3.0kw (4.0hp)
Feed Motor: C-axis 4.0kw (5.4hp)
ROBOT SPECIFICATIONS:
Robot L292-B, L672-B
Carrying Capacity 10 + 10kg (22 + 22lbs)
Robot Controller MAX SP1
Sample Part: Drive Pinion Forged Steel
BEFORE AFTER
Fuji Machine America171 Corporate Woods Pkwy, Vernon Hills, IL 60061Phone: 847-821-7137 Fax: 847-821-7815