8/9/2019 Antipiracy

1/2

1

SALAMA FIKIRA INTERNATIONAL LIMITED

 Anti Piracy Defences Stores for Vessel 200m x 35m

The quantities estimated to build defensives barrier on Bulk carriers and Container Ships vary due tothe different layouts / plans of the vessels. Bridges are taller on container ships and generally the beam/ breath is as well and there are other differences.

Ship Chandler / Agent should order the following;

STEEL:

⇒  12 x 6mt lengths of “Square Tube 30mm” (2mm gauge) – see picture

⇒  4 x 6mt lengths of Angle iron 40mm”. To be used to a post strainers.

⇒  4 lengths (of 6m) of 2”Inch or 50mm” piping if the ship is a bulk carrier.

SQUARE TUBE ANGLE IRON

WIRE:

⇒  1000m of Galvanised High Tensile fencing wire (must be 1.6mm or no bigger than 2.4mm )

⇒  25 m of soft binding wire 2mm thickness

⇒  1000m Coiled razor wire coiled in half-metre diameter – enough to lay 180metres of double

coils either side of the vessel. Surplus to block the access routes to B deck and the bridge⇒  Barbed wire is too time consuming and does not offer the same visual deterrent as razor wire.

COILED RAZOR WIRE

MISC:

⇒  500 Cable ties – must be heavy duty, 25cm long

⇒  4 x 50m of Under gate double insulated (or well insulated) single core cable.

⇒  It must have extremely good insulation and be extremely good quality. 1.6mm diameter.

⇒  Generally comes in rolls of 50 mts.– see picture.

8/9/2019 Antipiracy

2/2

2

SALAMA FIKIRA INTERNATIONAL LIMITED

CABLE TIES  SINGLE CORE CABLE

⇒  200 “W” light duty Insulators or similar. Because we cannot purchase pop, rivets that are longenough to service the Heavy-duty insulators. If they are available, go for the heavy duty.

⇒  30 Straining Insulators.

⇒  If strainers are not available, they can be made on ship using the Teflon Plastic carried onships to make Washers and bushes.

STRAINING INSULATORS “W” INSULATORS

⇒ 

2 Pairs Coveralls – sizes X large this is depending on the number of team members deployingto ship.

⇒ 

4 Pairs Leather Gloves Heavy duty for working with Razor wire .

⇒  2 x pop rivet guns

⇒ 

1000 of 5mm x 12.5mm pop rivets for light duty insulators. If heavy-duty insulators areprovide then the right size rivets need to be sourced. 4mm x20 mm length.

⇒  3 Pliers

⇒  3 rolls insulation tape

⇒  Connectors to connect the energiser to the fence wire.

⇒  10 “WARNING – ELECTRIC” (“KHATAR”) signs Preferably in Somali

⇒ 

If the vessel does not have 220 volt power as standard then a step up transformer from 110vto 220v is needed. Power requirement for the fence unit is no more than 500 watts

ENERGIZERS

Energizer + Battery x 1 pcs - Transformer from Battery to 7000 Volt charge

NOTE:

The vessel must be equipped with welding machine, angle grinder, hacksaws Drill bits and 24hrelectricity supply.

Operations Salama Fikira Group

December 04 th , 2009.