Upload
anotec-pty-ltd
View
377
Download
6
Embed Size (px)
DESCRIPTION
Anotec 0307 formulations for the control of odor (odour) from manufacturing and processing operations. Odour Assessment and investigations into odor (odour) complaints and for satisfying council requirements for odour control compliance.
Citation preview
Anotec Pty Limited
Anotec® 0307
Odour Control Formulations General Information & Specification Sheet
Formulations Division
ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700
Anotec® 0307by Anotec Pty Ltd.
techniques for odour
or drip-fed depending on the application required
Anotec 0307 is fully miscible in water with scientifically chosen and blended surfactants. This blend,
when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension
of the liquid/vapor compound.
A key property of the
odour components. The primary action takes place at the chemical odour and
interface.
Briefly, Anotec 0307 properties include:
• Detergent
• Increased penetrating and wetting abilities that allows the encapsulation of insoluble
chemical odour components.
• Aeration to assist in the successful disassociation of the chemical
• The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.
• Dissolves the chemical odour component so that it no longer forms part of the original
emission.
Anotec® Odour control formulations are
developed for use in areas where odour issues
exist that constitute an odour annoyance
though all toxic issues
by the client.
Most conventional odour solutions consist of
applying fragrances to mask the problem. Adding
fragrances simply covers or overpowers offending odours with something more acceptable. Anotec
has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',
breaking down odours into component parts, providing a unique
odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution
designed to control offending odours.
Anotec 0307 initially bonds with the odorous molecules resulting in
malodour incapable of reconstituting
formulations have
Anotec® 0307 Odour Control Formulations
ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700
www.anotec.com.au
0307 is a brand name for all odour control, formulations researched and developed
by Anotec Pty Ltd. Efficacies of the formulations are determined via qualitative
techniques for odour measurement. Anotec 0307 formulations can be fogged, hand spra
depending on the application required.
is fully miscible in water with scientifically chosen and blended surfactants. This blend,
when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension
of the liquid/vapor compound.
A key property of the Anotec 0307 formulation is that
odour components. The primary action takes place at the chemical odour and
Briefly, Anotec 0307 properties include:
Detergent-like action of the Anotec product in the liquid/air interface.
Increased penetrating and wetting abilities that allows the encapsulation of insoluble
chemical odour components.
Aeration to assist in the successful disassociation of the chemical
The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.
Dissolves the chemical odour component so that it no longer forms part of the original
emission.
Odour control formulations are
d for use in areas where odour issues
exist that constitute an odour annoyance even
all toxic issues are addressed and treated
Most conventional odour solutions consist of
applying fragrances to mask the problem. Adding
ply covers or overpowers offending odours with something more acceptable. Anotec
has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',
breaking down odours into component parts, providing a unique
odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution
designed to control offending odours.
initially bonds with the odorous molecules resulting in
malodour incapable of reconstituting back into a volatile organic compound.
formulations have been proven scientifically by way of olfactometry and chemical fingerprinting.
Anotec® 0307 Odour Control Formulations
General Information & Specification Sheet
Formulations Division
ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700 1222 | FAX: 02 9700 1771
www.anotec.com.au
all odour control, formulations researched and developed
Efficacies of the formulations are determined via qualitative
Anotec 0307 formulations can be fogged, hand spra
.
is fully miscible in water with scientifically chosen and blended surfactants. This blend,
when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension
that it modifies the surface properties of chemical
odour components. The primary action takes place at the chemical odour and
like action of the Anotec product in the liquid/air interface.
Increased penetrating and wetting abilities that allows the encapsulation of insoluble
Aeration to assist in the successful disassociation of the chemical odour compound.
The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.
Dissolves the chemical odour component so that it no longer forms part of the original
Odour control formulations are
d for use in areas where odour issues
even
Most conventional odour solutions consist of
applying fragrances to mask the problem. Adding
ply covers or overpowers offending odours with something more acceptable. Anotec
has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',
breaking down odours into component parts, providing a unique odour ‘fingerprint’.
odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution
initially bonds with the odorous molecules resulting in dilution thus
into a volatile organic compound. Efficacy of
been proven scientifically by way of olfactometry and chemical fingerprinting.
Anotec® 0307 Odour Control Formulations
Specification Sheet
Formulations Division
1222 | FAX: 02 9700 1771
all odour control, formulations researched and developed
and quantitative
Anotec 0307 formulations can be fogged, hand sprayed, misted
is fully miscible in water with scientifically chosen and blended surfactants. This blend,
when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension
the surface properties of chemical
odour components. The primary action takes place at the chemical odour and Anotec 0307
Increased penetrating and wetting abilities that allows the encapsulation of insoluble
odour compound.
The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.
Dissolves the chemical odour component so that it no longer forms part of the original
ply covers or overpowers offending odours with something more acceptable. Anotec
has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',
erprint’. Anotec's
odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution
dilution thus rendering the
Efficacy of Anotec 0307
been proven scientifically by way of olfactometry and chemical fingerprinting.
Anotec® 0307 Odour Control Formulations
General Information & Specification Sheet
Formulations Division
ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700 1222 | FAX: 02 9700 1771
www.anotec.com.au
Item Code 7110 Description Anotec 0307 is a concentrated odour control formulation
manufactured specifically for controlling and/or eliminating
malodours generated from general industrial, processing and
manufacturing activities. The formulation comprises of nature
identical plant oils, emulsifiers and non-ionic surfactant blend.
This product is fully miscible in water and must be diluted prior to
use
Application All Anotec® odour control formulations can be atomized via most
fogging and misting devices. Suggested application equipment
include the Anotec Fogmaster range, high pressure hydraulic or air
assisted nozzle arrangements.
Availability Anotec 0307 is available in 5-L, 25-L, 200-L and 1000-L IBC or Schutz
tanks. Ask about our Hyperconcentrate formulations suitable for
volume users and exporters.
Product Specification
Colour Clear / Milky-White
Odour Characteristic pine/eucalyptus blend
Specific gravity (mmHg) 0.98 grams/L
Stability / Storage 2 years (unopened)
Boiling Point (0C) 100
Flammability Not Flammable
Solubility in Water Completely
Abrasives None
pH 7.0
Ionic Nature Non-ionic