Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
European Committee for Standardization
Annual Report
2016
Annual Report
Logo of CEN.
European Committee for Standardization
1 C
EN
AN
NU
AL
RE
PO
RT
2016
TABLE OF CONTENTSThis report presents the main outcomes of activities carried out by CEN in 2016.
Please note that the outcomes of joint activities carried out by CEN in cooperation with CENELEC are presented in a separate report on CEN-CENELEC activities in 2016.
Letter from the President . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CEN Administrative Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CEN and its community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CEN developments in 2016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Facts and figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Annual accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CEN network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TABLE OF CONTENTSThis report presents the main outcomes of activities carried out by CEN in 2016.
Please note that the outcomes of joint activities carried out by CEN in cooperation with CENELEC are presented in a separate report on CEN-CENELEC activities in 2016.
Letter from the President page 2
CEN Administrative Board page 5
CEN and its community page 12
CEN developments in 2016 page 15
Facts and figures page 19
Annual accounts page 23
CEN network page 24
2
Letter from the President
As CEN President, it is my pleasure and privilege to present the CEN Annual Report 2016. This showcases the main activities of last year, led by CEN and its members, and by their experts coming primarily from industry who are a strong asset of our system. This report completes the joint CEN-CENELEC Annual Report, providing an overview of the main achievements in all common areas of activities during 2016. Having just begun my mandate as CEN President in January 2017, following a year as President Elect, I would like to thank my predecessor, Friedrich Smaxwil, for his excellent leadership of the organization during the last six years. He deserves a great deal of credit for many of the achievements set out in this report.
My professional background, which includes ten years in industry and large groups, has been widely connected to research activities, most of them industry-oriented. I am convinced of the benefits of the standardization system and the importance of bringing these two communities together to cross-fertilize each other. The renewal of the CEN and CENELEC cooperation agreement with the European Commission’s Joint Research Centre (JRC) re-affirms our longstanding cooperation in the field of standardization, pre-normative and co-normative research, focusing on further enhancing knowledge and expertise exchange between scientific research and European standardization. This collaboration, based on a strong cross-sectoral and multi-disciplinary cooperation, is important for the effective uptake of market-driven standardization to support EU policies.
Standardization is a key factor that translates in the market policy and regulatory goals. During 2016,
we continued to reinforce our partnership with the European institutions and support implementation of many EU policies and strategies, including the ’European Standards for the 21st Century’, the Digital Single Market, Energy Union and Circular Economy. With the active contribution of our industry and societal partners to European standardization work, we continue to strengthen the European Single Market in new and emerging areas, while placing special focus on achieving the Single Market for Services.
Moreover, in 2016, the CEN Technical Board accepted four standardization requests from the European Commission. These will lead to the development of new and revised standards in the field of postal services and improving the quality of the service, lifts and safety components for lifts, algae and their products, and eco-design and energy labelling of solid fuel boilers. About 29 percent of the publications in the CEN catalogue (4.731 of the total portfolio) are ’harmonised standards’ that support implementation of European legislation.
We live in an interconnected world; ICT has become all-pervasive and is a key driver of innovation. A vertical and sectoral breakdown for standardization activities is, therefore, not appropriate. Standardization as an interoperability enabler needs to play an essential role. CEN is active together with CENELEC to support Europe’s digital transformation. CEN has built a strong network through its contribution to the standardization priorities for the Digital Single Market. European Standards supporting the digital economy are being developed on a wide range of relevant topics: cybersecurity and e-privacy, e-health, e-accessibility, e-skills and e-learning, e-procurement
3 C
EN
AN
NU
AL
RE
PO
RT
2016
and e-invoicing, smart and sustainable cities, the Internet of Things (IoT) and machine-to-machine (M2M) communication.
To meet the digital objectives and to continue stimulating European economic growth through standardization, CEN led several initiatives in 2016 to ensure the ongoing improvement to the overall management of standardization work. This included adapting and evolving its rules and structure and increasing the flexibility of its deliverables. Actually, in addition to its catalogue of European Standards, CEN has seen an increase of almost 40 percent in the publication of CEN Workshop Agreements (CWAs) from 2009 to 2016. This type of publication is proving highly attractive in areas such as research and ICT.
Finally, we have continued to support the global competitiveness of our stakeholders by nurturing our longstanding cooperation with ISO. In fact, we celebrated the 25th anniversary of our Vienna Agreement with ISO. This helps to ensure that international and European standards avoid duplication and make the best use of development resources. For CEN, it is important to provide international standardization solutions where the market is global. This is also true for European Standards that support the implementation of EU regulation and policies.
This global outreach is further strengthened by a highly diverse CEN community that keeps on growing. Last year, CEN approved the full membership of ISS – the national standards Body of Serbia - which joined the CEN membership on 1 January 2017. This CEN community is at the heart of the success of our activities. So, on behalf of the CEN
Administrative Board, I would like to warmly thank our National Members and Affiliates, our Partners and Liaison Organizations as well as all the individual experts who participate in the work of our Technical Committees and Working Groups.
We look forward to our continuous cooperation in the years to come!
Vincent LaflècheCEN President
4
5 C
EN
AN
NU
AL
RE
PO
RT
2016
The CEN Administrative Board (CEN/CA) manages and administers CEN’s business, directing the work and coordinating the actions of all CEN bodies with the aim of executing the decisions taken by the General Assembly (AG). The CEN/CA also takes all steps that it considers necessary to achieve CEN’s corporate goals in its dealings with various partners and interlocutors, including national, European or international authorities and other organizations. The
CEN/CA, which normally meets three times per year, comprises the CEN President, three Vice-Presidents (Finance, Policy and Technical) and up to nine ordinary Board Members, all of whom are appointed by the whole CEN membership. The Director General of CEN and CENELEC also participates in CEN/CA meetings and acts as secretary.
CEN Administrative Board
CEN Administrative Board 2017
6
Vincent Laflèche President
Mr Vincent Laflèche is Director of the ‘École des Mines’ in Paris. From 2013 to 2016, he acted as chairman and CEO of the French Geological Survey (BRGM). In 2003, he became the Assistant General Manager of INERIS, the French public research institute on environment and industrial risk prevention, subsequently acting as CEO from 2007 to 2013. Previously, he held a variety of positions in insurance and engineering companies. He also had a number of commitments within the French Standardization Organization (AFNOR), including Chairmanship of the Strategic Committee ‘Environment and Societal Responsibility’. Mr Laflèche studied at the École Polytechnique and began his career at the French Ministry of Environment. He was named as CEN President Elect in June 2015 and has held the role of CEN President since 1 January 2017.
PRESIDENT AND VICE-PRESIDENTS 2017
CEN Administrative Board
7 C
EN
AN
NU
AL
RE
PO
RT
2016
Rüdiger Marquardt Vice-President Policy
Mr Rüdiger Marquardt is a Member of the DIN Executive Board. Between May 2007 and July 2011 he served as the Head of the Innovation and Standardization section within DIN. Before joining the DIN management in 2003, he held the position of Managing Director of Beuth Verlag, the official publishing company of DIN. Mr Marquardt studied automotive engineering, and began his career working as an editor of technical publications. He became a Member of DIN’s Executive Board in 2011 and was elected as a member of the CEN Administrative Board in 2015.
Guðrún Rögnvaldardóttir Vice-President Technical
Mrs Guðrún Rögnvaldardóttir studied electrical engineering in Iceland and Germany (Technical University of Karlsruhe), and also holds a Master of Public Administration (MPA) degree from the University of Iceland. She joined the secretariat of Icelandic Standards (IS) in 1991 and was appointed as Managing Director in 1998. She also spent a year working at the CEN Central Secretariat in Brussels. Mrs Rögnvaldardóttir has served as a member of the CEN Technical Board (1991-2001), the CENELEC Technical Board (1996-1999), the CEN Administrative Board (since 1998), the ISO Council (2005-2006 and 2011-2012) and as Vice-President and Administrative Board member of CENELEC (2007-2010). In 2012, she was elected CEN Vice-President Technical, starting on 1 January 2013.
Jesper JerlangVice-President Finance
Mr Jesper Jerlang has been the Director of Standardization at Danish Standards (DS) since 2006. He has held a series of positions in Danish Standards since joining the standardization organization in 1998, including responsibility for the Danish mirror committees. Between 2004 and 2006 he was a member of the IEC Standardization Management Board, and has been a Board Member of CEN since 2008 and a board member of ISO since 2014. Mr Jerlang was also a member of the CENELEC Board between 2008 and 2012.
Mr Jerlang holds a Master’s degree in technical and socio-economic planning from the University of Roskilde in Denmark and an executive MBA from Copenhagen Business School.
8
CEN Administrative Board
Javier García Díaz (UNE, Spain)
Mr Javier García Díaz has been Standards Director of UNE, the Spanish Association for Standardization and Certification, since 2012. Previously, he was Pre-Accession Advisor of the European Commission to Bulgaria in the field of Free Movement of Goods and member of the CEN and the CENELEC Technical Boards (BT). Between 2008 and 2013, he acted as Chairman of the Technical Committee Management Group of the CEN/Technical Board (BT). Mr García Díaz serves as a member of the IEC Standardization Management Board and chairs the CEN Strategic Advisory Group on Services. Mr García Díaz is a chemical engineer from the Complutense University in Madrid and holds Post-Graduate degrees in Business Administration and Marketing Management. He followed Diplomatic Studies at the Ministry of Foreign Affairs.
Thomas Idermark (SIS, Sweden)
Mr Thomas Idermark has been the CEO and President of the Swedish Standards Institute (SIS) since 2015, when he was also elected to the CEN Administrative Board. Between 2008 and 2014, he served as President and CEO of SKL Kommentus AB, a commercial organization that provides consulting services to local and regional public authorities in Sweden.
Mr Idermark has completed studies in Economics, Rural Management and Business Management. During his career he held senior management positions in business and in the banking sector and also as a consultant.
BOARD MEMBERS 2017
Pekka Järvinen (SFS, Finland)
Mr Pekka Järvinen has served as Managing Director of the Finnish Standards Association (SFS) since 2002. During this time, he also contributed to the work of the CEN Administrative Board (2002-2013) and the ISO Council (2009-2010). Prior to joining SFS, he held a number of management positions in Finnish companies in the paper and chemical industries. Mr Järvinen holds a Master’s degree in chemical engineering from the Helsinki University of Technology and a Bachelor’s degree in economics from the Helsinki School of Economics.
9 C
EN
AN
NU
AL
RE
PO
RT
2016
Pambos Kammas (CYS, Cyprus)
Mr Pambos Kammas, MBA, is the Director of Standardization at the Cyprus Organization for Standardization (CYS). Between 2004 and 2006, he was the Director of Certification at the Cyprus Certification Company, a subsidiary of CYS. Since 2006, Mr Kammas has represented CYS in the Administrative and Technical Boards of CEN and CENELEC and has actively contributed to pan-European efforts to reform the European Standardization System. Mr Kammas was also a member of the CENELEC Administrative Board (CA) between 2010 and 2012.
Priit Kikas (EVS, Estonia)
Mr Priit Kikas has been Managing Director of the Estonian Centre for Standardization (EVS) since 2006. His experience in standardization date back to 2001, when he was responsible for coordinating quality infrastructure activities in Estonia while working in the Ministry of Economic Affairs and Communication. Mr Kikas holds a degree in Economics from the University of Tartu in Estonia. He has also served as a member of the CENELEC Administrative Board (CA) since 2011.
Ruggero Lensi (UNI, Italy)
Mr Ruggero Lensi has been the Director General of the Italian Standardization Organization (UNI) since February 2017. He joined UNI in 1995, holding the positions of Head of the Standardization Department between 2000 and 2003, Technical Director until 2010 and Director of External Relations, New Business and Innovation until February 2017. Mr Lensi represented UNI for ten years on the CEN Technical Board (BT), where he served as Convenor of several Working Groups and also chaired the CEN/BT Technical Committee Management Group between 2004 and 2007. He holds a degree in Civil Engineering from the Polytechnic University in Milan.
10
Olivier Peyrat (AFNOR, France)
Mr Olivier Peyrat has been Director General of the French Association for Standardization (AFNOR) since 2003. He has completed studies at the Ecole Polytechnique, the École nationale supérieure des télécommunications (ENST), Ecole des Hautes Etudes Commerciales (Executive MBA) and INSEAD Business School. Mr Peyrat has long-standing professional experience in the fields of certification and standardization and has chaired numerous standardization committees and groups at national, European and international levels. He became Vice-President (Finance) of ISO in January 2013.
He is an Ingénieur en Chef au Corps des Mines (Hon) and Chevalier de la Légion d’Honneur.
Peter Maas (NEN, the Netherlands)
Mr Peter Maas has been a member of the Management Team at the Netherlands Standardization Institute (NEN) since 2000. Since joining NEN in 1993, he has held numerous senior management positions covering both standards development and standards publishing. He is currently responsible for Business Development, Communication and Marketing, Strategic Account management, Public Affairs and International Affairs. Prior to joining NEN, he held various positions in Research and Marketing & Sales at a Dutch truck manufacturer. Mr Maas is a mechanical engineer graduate from the University of Technology in Eindhoven. He holds Post-Graduate degrees in Business Administration and Marketing Management.
CEN Administrative Board
BOARD MEMBERS 2017
Scott Steedman (BSI, United Kingdom)
Dr Scott Steedman is Director of Standards at BSI, the National Standards Body of the United Kingdom. Formerly an academic at Cambridge University, Dr Steedman spent 20 years in industry working for major consulting and contracting companies in the construction sector. He is an Executive Director on the Group Board of BSI and a non-executive Director of the Port of London Authority. He was elected President of the European Council for Construction Research, Development and Innovation in 1997, a position he held for 11 years. Dr Steedman has been a Vice-President of both the Institution of Civil Engineers and the Royal Academy of Engineering. In 2010, he was awarded a CBE for his services to engineering. In 2012, Dr Steedman served as CEN Vice-President Policy from 2013 to March 2017.
11
CE
N A
NN
UA
L R
EP
OR
T 20
16
PRESIDENTS AND VICE-PRESIDENTS ELECTED FOR 2016
President: Friedrich Smaxwil
President Elect: Vincent Laflèche
Vice-President Finance: Piet-Hein Daverveldt
Vice-President Policy: Scott Steedman
Vice-President Technical: Guðrún Rögnvaldardóttir
MEMBERS OF THE ADMINISTRATIVE BOARD 2016
Javier García Díaz (AENOR, Spain)
Thomas Idermark (SIS, Sweden)
Pekka Järvinen (SFS, Finland)
Jesper Jerlang (DS, Denmark)
Pambos Kammas (CYS, Cyprus)
Priit Kikas (EVS, Estonia)
Ruggero Lensi (UNI, Italy)
Rüdiger Marquardt (DIN, Germany)
Olivier Peyrat (AFNOR, France)
12
CEN Affiliates are National Standardization Bodies (NSBs) in countries that are recognized as candidates or potential candidates for membership of the European Union. Affiliates may choose to participate in any CEN Technical Committee (TC) with observer status, on condition that they implement any European Standards (ENs) that are developed by the TC as national standards and withdraw any conflicting national standards.
CEN Companion Standardization Bodies are National Standardization Bodies (NSBs) in countries that don’t qualify for affiliation. They may request to participate in any CEN Technical Committee (TC) with observer status and are encouraged to implement any European Standards (ENs) that are developed by the TC as national standards and withdraw any conflicting national standards.
Former Affiliates and PSBs have gradually modified their status, becoming new Affiliates or Companion Standardization Bodies of CEN. The list given in page 25 and 26 of this report reflects the Affiliates CEN had at the end of 2016.
CEN Partner Organizations are European umbrella organizations interested in contributing to standardization activities in sectors with a very broad spectrum. As of 31 December, CEN has nine Partner Organizations. These include the European stakeholder organizations recognized in the framework of EU Regulation 1025/2012 namely ANEC, ECOS, ETUC, SBS as well as ETUI the European Trade Union Institute and pan-European industry organizations FIEC, ORGALIME, MedTech Europe, and Aqua Europe.
CEN GENERAL ASSEMBLY
The General Assembly (CEN/AG) is the supreme decision-making body of CEN, bringing together representatives of all 34 National Members.
The 45th Ordinary General Assembly (AG) was held in Skopje on 8 June 2016, hosted by the Standardization Institute of the Republic of Macedonia (ISRM). It confirmed the composition of the CEN Administrative Board for the period from 1 January 2017 until 31 December 2017, as shown on page 7. The AG also elected Mr Jesper Jerlang (Denmark) as Vice-President Finance starting January 2017 until the end of 2018, replacing Mr Piet-Hein Daverveldt (the Netherlands).
In addition, the General Assembly welcomed the alignment of the voting criteria for European Standards (ENs) and Technical Specifications (TSs) to those of the Lisbon Treaty. Also, in order to better support CEN’s and CENELEC’s global outreach strategy and the cooperation with Europe’s neighbouring countries, the CEN/AG encouraged full deployment of the revised concepts of cooperation with National Standards Bodies in those countries holding ’Affiliation‘ and ’Companion Standardization Body’ status.
The CEN/AG together with the CENELEC/AG, welcomed the addresses of Ms Maive Rute and Mr Jean-François Aguinaga on behalf of the European Commission, Ms Margrethe Asserson on behalf of EFTA, Mr Simon Hicks on behalf of ETSI, Mr Åke Danemar on behalf of the IEC and Mr Kevin McKinley on behalf of the ISO.
The 46th CEN/AG was held in Brussels on 23 November 2016.
The CEN/AG decided to grant the ‘Institute for Standardization of Serbia’ (ISS) full membership in CEN as of
1 January 2017. This took into account the outcome of the independent Assessors’ Report on the fulfilment of the criteria for membership by ISS.
THE CEN COMMUNITY
CEN offers an inclusive platform that is accessible to interested stakeholders: companies of all sizes - including small and medium-sized enterprises (SMEs) - consumer groups, societal and environmental interests, public sector organizations, academics and researchers. The various stakeholders are represented in the decision-making structures of CEN through the 34 National Members, in accordance with the national delegation principle. CEN’s National Members include the National Standardization Bodies of 28 European Union Member States and three Member States of the European Free Trade Association (Iceland, Norway and Switzerland) plus three EU candidate countries (Turkey, the Former Yugoslav Republic of Macedonia and Serbia).
CEN and CENELEC revised the concepts that frame their cooperation with National Standards Bodies (NSBs/NCs) outside the CEN and CENELEC membership, by proposing a new Affiliate and the Companion Standardization Body (CSB) statuses to NSBs and/or NCs interested in working closely with CEN and CENELEC.
The aim of this revision was to provide various levels of cooperation, tailored to the specific needs and objectives of the partners, in line with their respective strategy towards the EU. Following a transition period ending in July 2017, the former Affiliation and Partner Standardization Body statuses will be replaced by Affiliation and CSB concepts.
CEN and its community
13
CE
N A
NN
UA
L R
EP
OR
T 20
16CEN MEMBERS AND AFFILIATES
National Members Affiliates
CEN Liaison Organizations are European organizations, including fora, consortia, and EU Research Projects, interested in contributing to the work of one or more technical bodies at European level. As of 31 December, CEN has 228 Liaison Organizations. There were 23 new agreements signed with Liaison Organizations during 2016.
The rights and obligations concerning CEN Partner and Liaison Organizations are set out in CEN-CENELEC Guide 25.
CEN developments in 2016
15
CE
N A
NN
UA
L R
EP
OR
T 20
16
Please note that information about the outcomes of CEN’s standardization activities in 2016 can be found in the joint CEN-CENELEC Annual Report 2016.
CEN developments in 2016
CEN TECHNICAL BOARD
The CEN Technical Board (CEN/BT), together with its Technical Committee Management Group (BT/TCMG), coordinates and manages the standardization activities that are being developed by more than 1 900 technical bodies at European level (including Technical Committees, Sub-Committees, Working Groups and Workshops). In addition to overseeing these activities and related processes, CEN/BT is also responsible for evaluating and addressing requests to launch standardization activities on new subjects.
In 2016 the CEN/BT met twice. Both meetings included a joint session with the CENELEC Technical Board during which 20 common decisions were taken. Amongst these, CEN/BT agreed to create no further Project Committees and convert the existing ones to CEN Technical Committees. At the same time, it made provision of technical committee business plans optional.
A further two meetings of the CEN/BT Technical Committee Management Group (BT/TCMG) held extensive discussions on the future of ECISS (European Committee for Iron and Steel Standardization). BT/TCMG also decided, on behalf of the Technical Board, to initiate a CEN Focus Group on healthcare services, thus disbanding the SAGS-ABHS Ad Hoc Group.
The Technical Board created seven new CEN Technical Committees during the year. These were in the fields of:
- Hydrogen in energy systems (CEN-CLC/TC 6), - Horizontal standards for the provision of services (CEN/TC 447) - Funeral services (CEN/TC 448) - Quality of care for older people (CEN/TC 449) - Minimum requirements of patient involvement in person-centred care (CEN/TC 450) - Geothermal and water boreholes (CEN/TC 451) - Assistance Dog and Guide Dog Teams Standards and Instructors Competences’ (CEN/TC 452).
Furthermore, there were two CEN-CENELEC Joint Working Groups created for: - Energy measurement plan for organizations (CEN-CLC/JWG 9) - Energy-related products - Material Efficiency Aspects for Ecodesign (CEN- CLC/JWG 10).
Of the nine Standardization Requests received by CEN and CENELEC in 2016, the CEN/BT accepted six; the remainder were considered to fall within the remit of CENELEC. The requests accepted were in the fields of urban ITS, algae, postal services, elevators, ecodesign, energy labelling of solid fuel boilers and EMC.
CEN/BT also accepted a final draft Standardization Request in the Personal Protective Equipment field on smart textiles, which was received from the European Commission in early 2017.
16
CEN developments in 2016
formal partnerships or is in process of negotiating an agreement. Bilateral meetings were held with the National Standardization Bodies from Australia (SA), New Zealand (MBIE), Mongolia (MASM), Ecuador (INEN), China (SAC), Indian and Mexico (DGN), some of which have shown interest in learning more about the CEN and CENELEC foreign partnership concepts, particularly about the benefits of becoming Companion Standardization Body (CSB). In addition, a meeting with the South Asian Regional Standards Organization (SARSO) focused on the progress achieved in the negotiation of a MoU with CEN.
In the meeting with the African Organization for Standardization (ARSO), the CEN and ARSO representatives explored the possibility of providing ARSO with lists of European Standards to recommend for adoption by ARSO members. CEN and ARSO have a longstanding cooperation that is reinforced each year. Invited to contribute to the 52nd ARSO Council, CEN shared the European expertise in the “Standards development and implementation” process and explained the role played by European.
KEYMARK
The Keymark is a voluntary European certification mark, owned by CEN and CENELEC, which shows that a product or service conforms to the relevant European Standard(s). Keymark certification schemes for different product groups are operated by professional certification bodies, which are accredited by Members of the European cooperation for Accreditation (EA), on the basis of EN ISO/IEC 17065 (the international standard for ‘Conformity Assessment. Requirements for bodies certifying products, processes and services’).
standardization work. CEN members’ participation in the ISO technical work represents nearly half of the total participation of the 160 ISO members. This demonstrates that the CEN community is one of the main advocates of the benefits brought by international solutions developed within the framework of ISO.
On the occasion of the 39th ISO General Assembly, which took place in Beijing (People’s Republic of China) on 12-14 September 2016, CEN was represented by a high-level delegation headed by its President, Friedrich Smaxwil, and counted on the participation of other Officers and representatives of CEN.
In this context, the CEN and CENELEC Director General contributed to the ISO Panel on Regional Engagement Strategy, emphasising that ISO should pursue their endeavour of developing a strong regional standardization organizations policy promoting the adoption and use of international standards.
STANDARDIZATION TO BOOST GLOBAL COMPETITIVENESS
In addition to activities carried out jointly with CENELEC, as well as with ETSI, CEN also develops its own international cooperation activities. These include cooperating with numerous national and regional standardization organizations with which CEN has agreements in place. The goal of these is to contribute to the removal of Technical Barriers to Trade (TBT), thereby easing access to new markets for European businesses.
The ISO General Assembly provided a useful opportunity for the CEN-CENELEC delegation to meet with representatives of various national and regional standardization bodies where CEN holds
COOPERATION WITH ISO
The framework for ongoing technical cooperation between CEN and ISO is governed by the ‘Vienna Agreement’, first published in 1991. This framework includes regular exchanges of information, mutual representation at meetings and parallel adoption of standards at European and international levels. The collaboration means that by the end of 2016, approximately 32% of all publications in the CEN portfolio (excluding corrigenda and guides) were identical to the equivalent ISO publications. This alignment between European and international standards is particularly advanced in the environment, food, healthcare, materials and mechanical engineering sectors.
An updated edition of the Guidelines for implementing the Agreement on Technical Cooperation between ISO and CEN was published during 2016. The document includes new relevant operational and process specifications for developing common European and International standards. This latest version covers changes related to the new DIS-Enquiry procedure and the involvement of the New Approach Consultants for candidate harmonised parallel work.
There was also a meeting of the CEN and ISO Joint Coordination Group in 2016. This allowed CEN/BT Members and ISO/TMB members to discuss and reach a common understanding on the implementation of the Vienna Agreement. The topics covered related to the leadership in developing standards and the role of the New Approach Consultants.
The high level of participation of the CEN members in the ISO technical work illustrates the strong commitment of the organization to supporting international
17
CE
N A
NN
UA
L R
EP
OR
T 20
16
Following a decision from the CEN General Assembly in 2013, CEN decided to outsource the daily and administrative management of the Keymark (but not the ownership) to an external organization. Following an open call for tender, which was launched at the start of 2014, a rigorous selection procedure resulted in the decision to award the contract to DIN CERTCO.
The service contract was signed at the end of May 2015 and since then; DIN CERTCO is responsible for the day-to-day administrative management of the Keymark (in the domain of CEN) and acts as the central contact point for all questions relating to the Keymark.
DIN CERTCO’s results for 2016 show that there are currently 38 certification bodies in 15 European countries empowered to grant the Keymark. Approximately 2 000 valid Keymark certificates have been issued so far.
The CEN Certification Board (CCB) has also been reviewing its role, in order to increase its efficiency and effectiveness on conformity assessment-related matters.
Facts and figures
19
CE
N A
NN
UA
L R
EP
OR
T 20
16
Facts and figuresDELIVERABLES* 2014 2015 2016
European Standards (EN**) 904 977 907
Technical Specifications (TS) 62 63 43
Technical Reports (TR) 60 36 39
CEN Workshop Agreements (CWA) 36 41 141
CEN Guides (CG) 6 6 5
TOTAL 1 068 1 123 1 135
DELIVERABLES* 2014 2015 2016
Standards (ENs)** 13 736 14 056 14 302
EN Amendments 427 432 437
Workshop Agreements (CWA) 426 411 475
Technical Specifications (TS) 466 502 513
Technical Reports (TR) 393 423 448
Guides (CG) 33 35 38
Pre-Standards (ENV) 41 35 34
Reports (CR) 93 91 88
TOTAL 15 615 15 985 16 335
CEN TECHNICAL BODIES 2014 2015 2016
Active CEN Technical Committees (CEN/TC) 313 320 314
CEN TC/Sub-Committees (CEN/TC/SC) 45 45 45
CEN TC/SC Working Groups 1 521 1 539 1 497
Active Workshops 26 37 39
total 1 905 1 941 1 895
JOINT TECHNICAL BODIES* 2014 2015 2016
total 31 35 36*CEN-CENELEC and CEN-CENELEC-ETSI
*Including deliverables of CEN and joint work of CEN-CENELEC and CEN-CENELEC-ETSI
**Excluding corrigenda
*Including deliverables of CEN and of CEN-CENELEC-ETSI
** Excluding corrigenda
European Standards (EN)
Technical Specifications (TS)
Technical Reports (TR)
CEN Workshop Agreements (CWA)
CEN Guides (CG)907
5141
39
43
CEN OVERALL AT THE END OF 2016
CEN IN 2016
20
INTERNATIONAL RELATIONS
CEN Portfolio - Percentage of deliverables per business domain identical to ISO publicationsBu
ildin
g an
d ci
vil e
ngin
eerin
g
Che
mist
ry
Envir
onm
ent
Food
Hea
lth a
nd s
afet
y
Hea
lthca
re
Hou
seho
ld g
oods
, spo
rts a
nd le
isure
HVA
C
ICT
Mat
eria
ls
Mec
hani
cal e
ngin
eerin
g
Pack
agin
g
Serv
ices
Tran
spor
t
Utili
ties
and
ener
gy
12%
43%
51%55%
25%
77%
16%19%
24%
52%48%
30%
10%5%
9%
*Excluding Corrigenda and Guides
CEN Portfolio - Relation to ISO - at the end of 2016
Facts and figures
DELIVERABLES* Number Percentage
Identical to ISO publications 5 217 32,01%
Based on ISO publications 25 0,15%
Homegrown 11 055 67,83%
TOTAL 16 297 100%
Healthcare: 77%Food: 55%Materials: 52%Environment: 51%Mechanical engineering: 48%Chemistry: 43%Packaging: 30%Health and safety: 25%ICT: 24%HVAC: 19%Household goods, sports and leisure: 16%Building and civil engineering: 12%Services: 10%Utilities and energy: 9%Transport: 5%
21
CE
N A
NN
UA
L R
EP
OR
T 20
16
Total number of harmonized standards and other deliverables cited or intended for citation in the Official Journal of the European Union (OJEU) (including Amendments)
RELATION TO EUROPEAN UNION LEGISLATION
SECTORSDIRECTIVE/REGULATION
REFERENCEIN 2016 END 2016
Accreditation and Market Surveillance 765/2008 2 33
Active implantable medical devices 90/385/EEC 1 46
Cableways 2000/9/EC 23
Construction Products 305/2011 42 518
Cosmetic Products 1223/2009 1
Ecodesign of energy using products 1253/2014 4
Ecodesign of energy using products 2015/1095 1 1
Ecodesign of energy using products 206/2012 1 6
Ecodesign of energy using products 547/2012 1 1
Ecodesign of energy using products 641/2009 3
Ecodesign of energy using products 66/2014 1
Ecodesign of energy using products 813/2013 1 11
Ecodesign of energy using products 814/2013 1 5
Electromagnetic compatibility 2014/30/EU 1 13
Energy Labelling 1254/2014 4
Energy Labelling 2015/1094 1 1
Energy Labelling 811/2013 1 11
Energy Labelling 812/2013 1 5
Explosive atmospheres 2014/34/EU 3 61
Explosives for civil use 2014/28/EU 57
Gas appliances 2009/142/EC 1 95
General product safety 2001/95/EC 3 75
In vitro diagnostic medical devices 98/79/EC 1 39
Lifts 2014/33/EU 1 17
Low Voltage 2014/35/EU 1
Machinery 2006/42/EC 21 721
Measuring instruments 2004/22/EC 14
Measuring instruments 2014/32/EU 5
Medical devices 93/42/EEC 14 242
Non-automatic weighing instruments 2014/31/EU 1
Packaging 94/62/EC 6
Personal protective equipment 89/686/EEC 4 299
Postal Services 97/67/EC 2 8
Pressure equipment 2014/68/EU 21 226
Pyrotechnic articles 2013/29/EU 30
Radio equipment 2014/53/EU 1
Railways 2008/57/EC 12 118
REACH 1907/2006 3
Recreational craft 2013/53/EU 4 74
Safety of Toys 2009/48/EC 10
Simple pressure vessels 2014/29/EU 11
Sustainable use of Pesticides 2009/128/EC 4
GRAND TOTAL 141 2805 Note: A deliverable may be counted more than once if cited or intended for citation under more than one Directive
22
Percentage of harmonized deliverables identical to ISO per business domain
Che
mist
ry
Envir
onm
ent
Hea
lth a
nd s
afet
y
Hea
lthca
re
Hou
seho
ld g
oods
, spo
rts a
nd le
isure
HVA
C
Mec
hani
cal e
ngin
eerin
g
Tran
spor
t
4%
100%
16%
71%
14%
3%
25%33%
*All deliverables (excluding Corrigenda and Guides)
Portfolio of harmonized deliverables - at the end of 2016
Facts and figures
DELIVERABLES* Number Percentage
Identical to ISO 648 24,45%
Based on ISO 7 0,26%
Homegrown 1 995 75,28%
TOTAL 2 650 100%
RELATION TO EUROPEAN UNION LEGISLATION
At the end of 2016, the CEN catalogue counted 16 297 deliverables of which 2 650 (16,26%) were in support of EU legislation. Among this last total 655 were identical or based on ISO publications.
Environment: 100%Healthcare: 71%Transport: 33%Mechanical engineering: 25%Health and safety: 16%Household goods, sports and leisure: 14%Chemistry: 4%HVAC: 3%
23
CE
N A
NN
UA
L R
EP
OR
T 20
16
Annual accounts
* Figures are given in thousands of euro.
EXPENDITURE (€ X 1000)* 2014 2015 2016
Staff costs 6 745 6 549 6 828
Other operating costs 2 769 2 677 2 224
Contractual payments 10 914 13 110 7 731
Reserve for investment 675 - 140
TOTAL 21 103 22 336 16 923
INCOME (€ X 1000)* 2014 2015 2016
Contributions 5 604 5 816 6 278
Interest 45 36 18
Contractual income 14 613 16 366 10 454
Miscellaneous 841 118 173
TOTAL 21 103 22 336 16 923
FINANCING OF THE CEN-CENELEC MANAGEMENT CENTRE (CEN PART)
2014 2015 2016
Membership fees 56% 63% 69%
EC/EFTA support to standardization 35% 35% 29%
Other support 9% 2% 2%
TOTAL 100% 100% 100%
ASSETS (€ X 1000)* 2014 2015 2016
Fixed assets 365 196 191
Current assets 5 186 3 912 3 238
Liquid assets 8 044 10 691 11 985
Prepaid expenses and accrued income 211 143 406
TOTAL 13 806 14 942 15 820
LIABILITIES (€ X 1000)* 2014 2015 2016
Reserves 3 177 3 602 3 742
Provisions for liabilities and charges 1 512 1 368 1 371
Payables 4 268 4 741 3 299
Accrued expenses and deferred income 4 849 5 231 7 408
TOTAL 13 806 14 942 15 820
24
National Members
Estonia
EVS - Estonian Centre for [email protected]
Finland
SFS - Finnish Standards [email protected]
France
AFNOR - Association Française de [email protected]
Germany
DIN - Deutsches Institut für Normung [email protected]
Greece
NQIS/ELOT - Hellenic Organization for [email protected]
Hungary
MSZT - Hungarian Standards [email protected]
Iceland
IST - Icelandic [email protected]
Ireland
NSAI - National Standards Authority of [email protected]
Italy
UNI - Ente Nazionale Italiano di [email protected]
Latvia
LVS - Latvian [email protected]
Lithuania
LST - Lithuanian Standards [email protected]
Luxembourg
ILNAS - Institut Luxembourgeois de la Normalisation, de l’Accréditation, de la Sécurité et qualité des produits et [email protected]
Former Yugoslav Republic of Macedonia
ISRM - Standardization Institute of the Republic of [email protected]
Malta
MCCAA - Malta Competition and Consumer Affairs [email protected]
The Netherlands
NEN - Nederlands [email protected]
Austria
AS - Austrian [email protected]
AS+ - Austrian Standards Pluswww.as-plus.at
Belgium
NBN - Bureau de Normalisation/ Bureau voor [email protected]
Bulgaria
BDS - Bulgarian Institute for [email protected]
Croatia
HZN - Croatian Standards [email protected]
Cyprus
CYS - Cyprus Organisation for [email protected]
Czech Republic
UNMZ - Czech Office for Standards, Metrology and [email protected]
Denmark
DS - Danish [email protected]
CEN network
25
CE
N A
NN
UA
L R
EP
OR
T 20
16
CEN networkSpain
UNE - Asociación Española de Normalización [email protected]
Sweden
SIS - Swedish Standards [email protected]
Switzerland
SNV - Swiss Association for Standardization [email protected]
Turkey
TSE - Turkish Standards [email protected]
United Kingdom
BSI - British Standards [email protected]
AffiliatesThe list below reflects the Affiliates CEN had at the end of 2016. Following the revision of the Affiliation concept, from January 2017 several Affiliates gradually change their status and become Companion Standardization Bodies of CEN. A transition period is foreseen until the end of July 2017 where the two statuses co-exist
Albania
DPS - General Directorate of [email protected]
Armenia
SARM - National Institute of [email protected]
Azerbaijan
SCSMP - State Committee for Standardization, Metrology and Patent of the Republic of [email protected]
Belarus
BELST - State Committee for Standardization of the Republic of [email protected]
Bosnia and Herzegovina
BAS - Institute for Standardisation of Bosnia and [email protected]
Egypt
EOS - Egyptian Organization for Standardization & [email protected]
Georgia
GEOSTM - Georgian National Agency for Standards and [email protected]
Israel
SII - Standards Institution of [email protected]
Norway
SN - Standards [email protected]
Poland
PKN - Polish Committee for [email protected]
Portugal
IPQ - Instituto Português da [email protected]
Romania
ASRO - Romanian Standards [email protected]
Serbia
ISS - Institute for Standardization of [email protected]
Slovakia
UNMS - Slovak Office of Standards, Metrology and [email protected]
Slovenia
SIST - Slovenian Institute for [email protected]
26
Jordan
JSMO - Jordan Standards and Metrology [email protected]
Lebanon
LIBNOR - Lebanese Standards [email protected]
Republic of Moldova
INS - National Institute for Standardization [email protected]
Montenegro
ISME - Institute for Standardization of [email protected]
Morocco
IMANOR - Institut Marocain de [email protected]
Tunisia
INNORPI - National Institute for Standardization and Industrial Property [email protected]
Ukraine
UkrNDNC - Ukrainian Scientific Research and Training Center on Standardization, Certification and [email protected] www.ukrndnc.org.ua
MedTech Europe - Alliance of European medical technology industry associations www.medtecheurope.org
ORGALIME -The European Engineering Industries Association www.orgalime.org
SBS -Small Business Standards www.sbs-sme.eu
LIAISON ORGANIZATIONS
ACE - Alliance for Beverages Cartons and Environment www.beveragecarton.eu
ACEA - European Automobile Manufacturers’ Association www.acea.be
ACEM - Association des Constructeurs Européens de Motocycles www.acem.eu
AECC - Association for Emissions Control by Catalyst AISBL www.aecc.eu
AEGPL - European Liquefied Petroleum Gas Association www.aegpl.be
AFECOR - European Control Manufacturers Association www.afecor.org
AIB - Association of Issuing Bodies www.aib-net.org
AISE - International Association for Soap, Detergents and Maintenance Products www.aise.eu
APEAL - Association of European Producers of Steel for Packaging www.apeal.org
AQUA - Association Européenne des Fabricants de Compteurs d’Eau et de Compteurs d’Energie Thermique www.aqua-metering.org
AQUA EUROPA www.aqua-europa.eu
ARGE - The European Federation of Associations of Lock & Builders Hardware Manufacturers www.arge.org
ASD - AeroSpace and Defence Industries Association in Europe www.asd-europe.org
ASERCOM - Association of European Refrigeration Compressor Manufacturers www.asercom.org
ASIS International www.asisonline.eu
ATVEA - All-Terrain Vehicles Industry European Association www.atvea.org
CEN networkPartner Standardization Bodies (PSBs)The list below reflects the PSBs CEN had at the end of 2016. Following the revision of the foreign partnership concept, the PSB status was disbanded. From January 2017 the CEN PSBs gradually become Companion Standardization Bodies (CSBs) of CEN.
Australia
SA - Standards Australia [email protected]
Kazakhstan
KAZMEMST - Committee for Standardization, Metrology and [email protected]
Mongolia
MASM - Mongolian Agency for Standardization and [email protected]
European PartnersAs of 31 December 2016 in accordance with the CEN policy of Partnership as defined in CEN-CENELEC Guide 25 ‘The concept of Partnership with European Organizations and other stakeholders’
PARTNER ORGANIZATIONS
ANEC - The European Association for the Co-ordination of Consumer Representation in Standardisation www.anec.eu
AQUA Europa www.aqua-europa.eu
ECOS - European Environmental Citizens Organisation for Standardisation www.ecostandard.org
ETUC - European Trade Union Confederation www.etuc.org
ETUI - European Trade Union Institute www.etui.org
FIEC - European Construction Industry Federation www.fiec.eu
27
CE
N A
NN
UA
L R
EP
OR
T 20
16
BIBM - International Bureau for Precast Concrete www.bibm.eu
BIPAR - European Federation of Insurance Intermediaries www.bipar.eu
bSI - BuildingSMART International Ltd www.buildingsmart.org
CAOBISCO - Association of the Chocolate, Biscuit and Confectionery Industries of Europe www.caobisco.eu
CECE - Committee for European Construction Equipment www.cece.eu
CECED - European Committee of Domestic Equipment Manufacturers www.ceced.eu
CECOD - Committee of European Manufacturers of petroleum Measuring and distributing Equipment www.cecod.eu
CECRA - European Council for Motor Trades & Repairs www.CECRA.eu
CED - Council of European Dentists www.eudental.eu
CEFIC - European Chemical Industry Council www.cefic.org
CEFS - European Committee for Sugar Manufacturers www.comitesucre.org
CEI-Bois - European Confederation of Woodworking Industries www.cei-bois.org
CEIR - Comité Européen de l’Industrie de la Robinetterie www.ceir-online.org
CEMA - European Committee of Associations of Manufacturers of Agricultural Machinery www.cema-agri.org
CEMBUREAU - The European Cement Association www.cembureau.be
CEOC International - Confederation of Inspection and Certification Organisations www.ceoc.com
CEPE - European Confederation of Paint, Printing Ink and Artists’ Colours Industry www.cepe.org
CEPI - Confederation of European Paper Industries www.cepi.org
CEPIS - Council of European Professional Informatics Societies www.cepis.org
CERAME-UNIE - The European Ceramic Industry Association www.cerameunie.eu
CICIND - International Committee on Industrial Chimneys www.cicind.org
CIRFS - European Man-made Fibres Association www.cirfs.org
CLECAT - European association for forwarding, transport, logistic and customs services www.clecat.org
CLEPA - European Association of Automotive Suppliers www.clepa.com
CoESS - Confederation of European Security Services www.coess.eu
CONCAWE - The Oil Companies’ European Organisation for Environment, Health & Safety www.concawe.org
CONFIAD - Pan-European Confederation of Customs Brokers and Custom Representatives www.confiad.org
CORESTA - Centre de Coopération pour les Recherches Scientifiques Relatives au Tabac www.coresta.org
Cosmetics Europe - The Personal Care Association www.cosmeticseurope.eu
CPE - Construction Products Europe www.construction-products.eu
DigitalEurope - The Voice of the European Digital Technology Industry www.digitaleurope.org
DTCE - Digital Trust and Compliance Europe www.dtce.eu
EAA - European Aluminium Association www.alueurope.eu
EAACA - European Autoclaved Aerated Concrete Association www.eaaca.org
EAE - European Association for External Thermal Insulation Composite Systems www.ea-etics.com
EAPA - European Asphalt Pavement Association www.eapa.org
EAPFP - European Association for Passive Fire Protection www.eapfp.com
EASEE-gas - European Association for the Streamlining of Energy Exchange-gas www.easee-gas.eu
EBA - European Biogas Association www.european-biogas.eu
EBB - European Biodiesel Board www.ebb-eu.org
EBPC - European Balloon & Party Council www.ebpcouncil.eu
ECA - European Chimneys Association www.eca-europe.org
ECA - European Cocoa Association aisbl www.eurococoa.com
ECA - European Cockpit Association www.eurocockpit.be
ECAP - European Consortium of Anchors Producers www.ecap-sme.org
ECCA - European Coil Coating Association www.prepaintedmetal.eu
ECCH - European Central Council of Homeopaths www.homeopathy-ecch.eu
ECCS - European Convention of Constructional Steelwork Associations www.steelconstruct.com
ECF - European Cyclists’ Federation www.ecf.com
ECFA - European Children’s Fashion Association cfeurope.wordpress.com
ECH - European Committee for Homeopathy www.homeopathyeurope.org
ECI - European Copper Institute www.eurocopper.org
ECIA - European Cellulose Insulation Association www.ecia.eu.com
ECMA - European Cylinder Makers Association www.ecma.info
ECO-Platform AISBL - ECO-Platform AISBL www.eco-platform.org
ECOBA - European Coal Combustion Products Association e.V. www.ecoba.org
ECSPA - European Calcium Silicate Producers Association www.ecspa.org
EDANA - International Association Serving the Nonwovens and Related Industries www.edana.org
EDEN Project - End-User Driven Demo for CBRNe www.edenproject.com
EDIFICE - The Global Network for B2B Integration in High Tech Industries www.edifice.org
EeSA - The European eSkills Association www.eskillsassociation.eu
28
CEN networkEESPA - European e-Invoicing Service Providers Association www.eespa.eu
EFBA - European Fertiliser Blenders Association www.european-blenders.org
EFCA - European Federation of Engineering Consultancy Associations www.efcanet.org
EFCA -European Federation of Concrete Admixtures Associations Limited www.efca.info
EFCO&HPA - European Federation of Campingsite Organisations & Holiday Park Associations www.efcohpa.eu
EFFAT - European Federation of Food, Agriculture and Tourism Trade Unions www.effat.org
EFIEES - The European Federation in Intelligent Energy Efficiency Services www.efiees.org
EFLM - European Federation of Clinical Chemistry and Laboratory Medicine www.efcclm.eu
EFNDT - European Federation for Non-Destructive Testing www.efndt.org
EFRTC - European Federation of Railway Trackworks Contractors www.efrtc.org
EFSN - European Fire Sprinklers Network www.eurosprinkler.org
EFfCI - The European Federation for Cosmetic Ingredients www.effci.com
EGEA - European Garage Equipment Association www.egea-association.eu
EGGA - European General Galvanizers Association www.egga.com
EGMF - European Garden Machinery Federation www.egmf.org
EGOLF - European Group of Organisations for Fire Testing, Inspection and Certification www.egolf.org.uk
EHI - European Heating Industry Association www.ehi.eu
EHP - Euroheat & Power www.euroheat.org
EIFP - European Institute for Fire Protection ww.eifp.eu
EIGA - European Industrial Gases Association www.eiga.eu
EIHA - European Industrial Hemp Association www.eiha.org
ELA European Lift Association www.ela-aisbl.org
ELCA - European Lift & Lift Components Association www.elca-europe.org
EMFEMA - European Manufacturers of Feed Minerals Association www.emfema.org
EMO - European Mortar Industry Organisation www.euromortar.com
EN13606 - Vereniging EN 13606 Consortium www.en13606.org
ENFSI - European Network of Forensic Science Institutes www.enfsi.eu
ENPC - European Nursery Products Confederation www.enpc.eu
EOQ - European Organization for Quality www.eoq.org
EORNA -European Operating Room Nurses Association www.eorna.eu
EPBS - European Association for Professions in Biomedical Science www.epbs.net
EPEE - European Partnership for Energy and the Environment http://www.epeeglobal.org
EPFA - European Phenolic Foam Association www.epfa.org
ePURE - European Producers Union of Renewable Ethanol www.epure.org
ERF - European Racking Federation www.erfed.org
ERFO - European Recovered Fuel Organisation www.erfo.info
ERMCO European Ready-Mixed Concrete Organisation www.ermco.eu
ERPA - European Recovered Paper Association www.erpa.info
ESAM - European Society of Aerospace Medicine www.esam.aero
ESSA - European Security Systems Association www.ecb-s.com
ESTIF - European Solar Thermal Industry Federation www.estif.org
ESTP - European Society of Tattoo and Pigment Research www.estpresearch.org
ETF - European Transport Workers’ Federation www.etf-europe.org
ETRMA - European Tyre & Rubber Manufacturers’ Association www.etrma.org
ETSA - European Textile Services Association www.etsa-europe.org
EUBA - European Bentonite Association www.ima-europe.eu/about-ima-europe/associations/eu
EuCIA - European Composites Industry Association www.eucia.org
EuLA - European Lime Association AISBL www.eula.eu
EUMABOIS - European Committee of Woodworking Machine Manufacturers www.eumabois.com
EUMEPS - European Manufacturers of Expanded Polystyrene www.eumeps.org
EuPC - European Plastics Converters www.plasticsconverters.eu
EURALARM - Association of the European Fire and Security Industry www.euralarm.org
EurECCA -European Cabin Crew Association www.eurecca.aero
EURIMA - European Insulation Manufacturers Association www.eurima.org
EURO-AIR - European Association of Air Heater Manufacturers www.euro-air.com
EUROBITUME - European Bitumen Association www.eurobitume.eu
EUROFER - The European Steel Association www.eurofer.eu
EUROFEU - European Committee of the Manufacturers of Fire Engines and Apparatus www.eurofeu.org
Eurogroup for animals www.eurogroupforanimals.org
EUROGYPSUM - Association of European Gypsum Industries www.eurogypsum.org
EUROLUX - European Group for Rooflights and Smoke Ventilation www.eurolux-sv.de
EUROMINES - European Association of Mining Industries, Metal Ores & Industrial Minerals www.euromines.org
29
CE
N A
NN
UA
L R
EP
OR
T 20
16
EUROMOT - The European Association of Internal Combustion Engine Manufacturers www.euromot.org
EUROPABio - European Association for BioIndustries www.europabio.org
EuropeActive - (formerly EHFA) www.europeactive.eu
European Bioplastics www.european-bioplastics.org
EUROPEN - European Organization for Packaging and the Environment aisbl www.europen-packaging.eu
EUROPUMP - European Committee of Pump Manufacturers www.europump.org
EUROSLAG - The European Slag Association www.euroslag.org
EuroWindoor - European window, door and curtain wall manufacturers www.eurowindoor.eu
EUSA - European Union for Swimming Pool and Spa Associations www.eusaswim.eu
EVA - European Vending Association www.vending-europe.eu
eVACUATE Project www.evacuate.eu
EuSALT European - Salt Producers’ Association www.eusalt.com
EWA - European Water Association http://www.ewaonline.de
EWA Europe - European Waterproofing Association AISBL www.ewa-europe.com
eWall Project - eWall Project for Active Long Living ewallproject.eu
EWF - European Federation for Welding, Joining and Cutting www.ewf.be
EWIMA - European Writing Instruments Manufacturer’s Association www.ewima.org
EWPM - European Wood Preservative Manufacturers Group www.ewpm.org
EWTA - European Water Treatment Association www.ewta.eu
EXCA - European Expanded Clay Association www.exca.eu
FAECF - European Composites Industry Association www.faecf.eu
FEA - European Federation of Aerosol www.aerosol.org
FEDIAF - Fédération Européenne de l’Industrie des Aliments pour Animaux Familiers www.fediaf.org
FEDMA - Federation of European Direct and Interactive Marketing www.fedma.org
FEFANA - EU Association of Specialty Feed Ingredients and their Mixtures www.fefana.org
FEG - European Federation of Tourist Guide Associations www.feg-touristguides.com
FEICA - The Association of the European Adhesive & Sealant Industry www.feica.eu
FEM - European Federation of Materials Handling and Storage Equipment www.fem-eur.com
FEPE - European Envelope Manufacturers’ Association www.fepe.org
FICT - Fédération international des Cadres des Transports
FIDE - European Dental Industry www.fide-online.org
FIGIEFA - International Federation of Automotive Aftermarket Distributors www.figiefa.eu
FIM - Fédération Internationale de Motocyclisme www.fim-live.com
FoFam Project - Industrial and regional valorisation of FoF Additive project/ consortium Manufacturing Projects’ www.fofamproject.eu
FoodDrinkEurope - Confederation of the Food and Drink Industries in the EU www.fooddrinkeurope.eu
FORE - Forum for Osteopathic Regulation in Europe www.forewards.eu
GCAQE - Global Cabin Air Quality Executive www.gcaqe.org
GIE - Gas Infrastructure Europe www.gie.eu
GS1 - The global language of business www.gs1.org
GS1 in Europe www.gs1.eu
Glass for Europe www.glassforeurope.com
GlobalPlatform www.globalplatform.org
HECTOS Project Harmonized evaluation, Certification and Testing of Security Products www.hectos-fp7.eu
HOTREC - Hotels, Restaurants & Cafés in Europe www.hotrec.eu
ICOMOS - International Council on Monuments and Sites www.icomos.org
IDF - International Dairy Federation www.fil-idf.org
IFCC - International Federation of Clinical Chemistry and Laboratory Medicine www.ifcc.org
IGI - The Global Wallcoverings Association www.igiwallcoverings.org
ILSE - International Life Saving Federation of Europe www.europe.ilsf.org
IMA-Europe - Industrial Minerals Association – Europe www.ima-europe.eu/about-ima-europe/associations/eu
IOGP - International Association of Oil & Gas Producers www.ogp.org.uk
ISCC - International Sustainability and Carbon Certification www.iscc-system.org
ISHRS - International Society of Hair Restoration Surgery www.ishrs.org
iSTRESS Project - Pre-standardization of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale www.stm.uniroma3.it/iSTRESS/
ITF - International Tennis Federation www.itftennis.com
IWMA - International Water Mist Association www.iwma.net
IWTO - International Wool Textile Organisation www.iwto.org
LEADing Practice www.leadingpractice.com
LightingEurope AISBL www.elcfed.org
MARCOGAZ - Technical Association of the European Natural Gas Industry www.marcogaz.org
MI - Methanol Institute www.methanol.org
NanoDefine Project www.nanodefine.eu
NaNoREG Project www.nanoreg.eu
30
CEN networkENISA - European Union Agency for Network and Information Security www.enisa.europa.eu
ERA - European Railway Agency www.era.europa.eu
FRONTEX www.frontex.europa.eu
OTHER COOPERATING ORGANIZATIONS
EA - European Co-operation for Accreditation www.european-accreditation.org
ECSS - The European Cooperation for Space Standardization www.ecss.nl
ENTSO-E - The European Network of Transmission System Operators for Electricity www.entsoe.eu
ENTSOG - The European Network of Transmission System Operators for Gas www.entsog.eu
EURAMET - The European Association of National Metrology Institutes www.euramet.org
EUROCAE - European Organisation for Civil Aviation Equipment www.eurocae.net
FIB - The International Federation of Structural Concrete www.fib-international.org
IFAN - International Federation of Standard Users www.ifan.org
NSO - NATO Standardization Office nso.nato.int
OIML - International Organization of Legal Metrology www.oiml.org
Zigbee Alliance, Inc. www.zigbee.org
UEPG - European Aggregates Association www.uepg.eu
UIP - International Union of Wagon Keepers a.i.s.b.l. www.uiprail.org
UITP - International Association of Public Transport www.uitp.org
UNIFE - The European Rail Industry www.unife.org
UPEI - Union of European Petroleum Independents www.upei.org
VGB - VGB PowerTech www.vgb.org
VIPA International - Vacuum Insulation Panel Association www.vipa-international.com
VISA EUROPE - Visa Europe Services INC www.visa.com
VTCT - Vocational Training Charitable Trust www.vtct.org.uk
WBT - World association of manufacturers of bottles and teats www.thewbt.org
WEI-IEO - European Institute for Wood Preservation www.wei-ieo.org
WFSGI - World Federation of the Sporting Goods Industry www.wfsgi.or
World Rugby - World Rugby Limited www.worldrugby.org
WQA - Water Quality Association www.wqa.org
ASSOCIATED BODIES
ASD-STAN - The Standardization association of the European Associations of Aerospace Industries www.asd-stand.org
ECISS - European Committee for Iron and Steel Standardisation www.cen.eu/work/areas/Materials/Pages/default.aspx
EUROPEAN COUNSELLORS
EC - European Commission www.ec.europa.eu
EFTA - European Free Trade Association www.efta.int
EUROPEAN INSTITUTIONAL STAKEHOLDERS
EC – JRC - European Commission - Joint Research Centre ec.europa.eu/jrc
EDA - European Defence Agency www.eda.europa.eu
NanoRem Project www.nanorem.eu
NATRUE - International Natural and Organic Cosmetics Association www.natrue.org
NFC Forum - Near Field Communication Forum www.nfc-forum.org
NGVA Europe - Natural & bio Gas Vehicle Association www.ngvaeurope.eu
NI - Nickel Institute www.nickelinstitute.org
NIA - Nanotechnology Industries Association www.nanotechia.org
OpenPEPPOL AISBL www.peppol.eu
POLYGRAPH Project www.polygraphproject.eu
PPA Europe - European Association for Panels and Profiles www.ppa-europe.eu
PU Europe - Federation of European Polyurethane Rigid Foam Associations www.pu-europe.eu
PlasticsEurope AISBL www.plasticseurope.org
PRE - Plastics Recyclers Europe www.plasticsrecyclers.eu
ResiStand Project www.resistand.eu
REHVA - Federation of European Heating and Air-conditioning Associations www.rehva.eu
RSB - Roundtable on Sustainable Biomaterials www.rsb.org
ME Safety a.i.s.b.l. www.sme-safety.eu
spiritsEUROPE European Spirits Organisation www.spirits.eu
Starch Europe www.starch.eu
T-REX Project cordis.europa.eu/result/rcn/192400_en.html
TEPPFA - The European Plastic Pipes and Fittings Association www.teppfa.eu
TIE - Toy Industries of Europe www.tietoy.org
UECBV - European Livestock and Meat Trading Union www.uecbv.eu
31
CE
N A
NN
UA
L R
EP
OR
T 20
16
ABOUT CEN CEN (European Committee for Standardization) is recognized by the EU and EFTA as the European Standardization Organization responsible for developing standards at European level. These standards set out specifications and procedures for a wide range of materials, processes, products and services.
The members of CEN are the National Standardization Bodies of 34* European countries. European Standards (ENs) and other standardization deliverables adopted by CEN are accepted and recognized in all of these countries.
European Standards contribute to enhancing safety, improving quality, facilitating cross-border trade and strengthening the European Single Market. They are developed through a process of collaboration between experts nominated by business and industry, research institutes, consumer and environmental organizations and other stakeholders. CEN works to promote the international alignment of standards in the framework of the technical cooperation agreement with ISO (International Organization for Standardization).
* number of full members in January 2017
For more information, please visit: www.cen.eu
CREATED & PRINTED BY:Losfeld Communication Rue de la Couronne, 76B-7730 Estaimpuis, Belgiumwww.losfeld.be
PUBLISHER: Sarah Penny CEN-CENELEC Management CentreAvenue Marnix, 17B-1000 Brussels, Belgium© CEN 2017ISBN 978-92-9097-268-6
Avenue Marnix, 17 - B-1000 Brussels - www .cen .eu
CENAvenue Marnix, 17 - B-1000 Brussels - www.cen.eu