Upload
duongdiep
View
218
Download
0
Embed Size (px)
Citation preview
Angiosperms:The Flowering Plants
Slide 1 / 86
Brief Phylogeny of Plants
Aquatic plants
Vascular plants Non-vascular plants
Seeded Plants Non-Seeded plants
Angiosperm Gymnosperm
Monocot Dicot This presentation will focus on angiosperms
Slide 2 / 86
Angiosperms
Angiosperms are the flowering seed plants. Angiosperms have dominated the land for over 100 million years and there are about 250,000 known species.
Most of our foods come from a few hundred domesticated species of flowering plants.
Roughly 70% of angiosperms are polyploid.
Slide 3 / 86
Flowering Plants
Some Grasses
Examples of AngiospermsDeciduous Trees (Trees that loose their leaves in a yearly cycle)
Slide 4 / 86
Monocots and Dicots
The two main groups of angiosperms are the Monocots and the Dicots.
Monocot Dicot
The term monocot and dicot refer to the first leaves that appear on the embryo of the plant, the cotyledon.
Slide 5 / 86
Slide 6 / 86
Examples of DicotsFruit Trees Grape Vines
Magnolia TreePumpkin Patch
Slide 7 / 86
Differentiating Monocots and Dicots
Monocots and Dicots can be distinguished from each other by looking at a number of identifying traits.
These traits include seed leaves, leaf veins, stems, flowers, and roots.
Slide 8 / 86
As we already mentioned, the cotyledon is an embryonic seed leaf, which is the first part of the plant to appear after it emerges from its seed.
Cotyledon
Monocot has one cotyledon
Dicot has two cotyledons
Slide 9 / 86
Monocot Dicot
seed coat seed coat
endosperm endosperm
onecotyledon
two cotyledons
embryo embryo
Slide 10 / 86
1 A dicot has one cotyledon.
True
False
Slide 11 / 86
Monocots have parallel leaf veins
Leaf Veins
while dicots have branched leaf veins
Slide 12 / 86
Slide 13 / 86
The vascular tissue which transports water and nutrients up the stem of the plant has different arrangements in monocots and dicots.
Stem Vascular Bundles
Monocots have bundles in complex arrangements
Dicots have vascular bundles in a ring
Slide 14 / 86
3 This is the stem of a dicot.
True
False
Slide 15 / 86
The floral petals on each plant differ in total number. Monocots have petals in multiples of three, while dicots have petals in multiples of four or five.
Flower Petal Arrangements
Multiple of 3Monocot
Multiple of 4 or 5Dicot
Slide 16 / 86
4 Is this flower a monocot?
Yes
No
Slide 17 / 86
5 This flower is a monocot.
True
False
Slide 18 / 86
Monocots have a fibrous root system,
Roots
while dicots typically have one taproot.
Slide 19 / 86
Slide 20 / 86
Slide 21 / 86
The adaptations allow plants to function on terrestrial habitats without drying out.
Adaptations
Plants need to absorb water and minerals from the soil, CO2 from the air, and light from the sun.
Slide 22 / 86
Two main sections to the plant body: the roots and the shoots.
The plant body
shoots
roots
Slide 23 / 86
The 3 functions of the root system are to:
(1) anchor the plant
(2) absorb and transport minerals and water
(3) store food
Functions of the Root System
Slide 24 / 86
Slide 25 / 86
7 The main function of the root hair is to
A increase anchoring power of the plant
B increase surface area for absorption
C protect roots from freezing temperatures
D provide a passageway for nutrients
Slide 26 / 86
The shoot system consists of the stems, leaves, and reproductive structures
Shoot System
Slide 27 / 86
Stems are composed of nodes, where leaves, flowers, and other stems attach.
Space between the nodes is the internode.
Leaves are composed of photosynthetic blades and short stalks that attach at the nodes.
Parts of the stem
Leaf
Slide 28 / 86
Buds are undeveloped shoots which have the potential to grow into nodes, internodes, and leaves.
Buds
Slide 29 / 86
Terminal Buds are found at the top of the plant and are responsible for the growth in height.
Axillary (or lateral) Buds are found at each point of attachment for a leaf and the stem and are responsible for growth in width.
Types of Buds
Slide 30 / 86
Apical Dominance results from the release of the hormone Auxin by the terminal bud which inhibits the growth from the lateral buds.
To made a plant bushier, you remove the terminal bud, which then allows for growth from the lateral buds. This is because the bud is removed, which means the hormone suppressing the growth is also removed.
Apical Dominance
This is also why pruning makes fruit trees produce more fruit.
Slide 31 / 86
8 Removing the terminal bud of a plant will cause:
A an increase in the root system
B an increase in the size of the leaves
C increased axillary bud growth
D a plant to lose the ability to flower
Slide 32 / 86
Based on their functions, many plants have modified structures.
Typical structures modified are roots, stems, and leaves.
Structural Modifications
Slide 33 / 86
Many dicots have modified taproots.
Carrots, beets, turnips, and sweet potatoes are all roots modified for storage of carbohydrates.
The plants use the stored starches for flower production. This is why root crops are harvested before they flower.
Modified Roots
Slide 34 / 86
A stolon is a modified stem who's purpose is to provide a means for asexual reproduction.
Rhizomes (like ginger) and tubers (like potatoes) are underground stems that store starch.
Modified Stems
Slide 35 / 86
Spines offer protection
Tendrils are modified for grasping
Modified Leaves
Slide 36 / 86
9 A stem modified for nutrient storage is called a
A taproot
B runner
C tuber
D bulb
Slide 37 / 86
· many plant cells are photosynthetic and contain chloroplasts
· most plant cells have a large central vacuole that helps support the cell and keep it firm
· plant cells have a cell wall composed of cellulose that surrounds the plasma membrane
Review: Unique features of plant cells
Slide 38 / 86
Review - Identify the parts of plant cells
Slide 39 / 86
10 Which structure is found in both plant and animal cells?
A chloroplasts
B mitochondria
C cell walls
D all three are unique to plant cells only
Slide 40 / 86
Everything always goes back to reproduction
"An oak tree is just an acorn's way of making more acorns"
Slide 41 / 86
11 Review: Angiosperms are _______________ plants.
A cone-bearing
B vascular
C flowering
D seedless
Slide 42 / 86
The Flower
The flower is the reproductive shoot of an angiosperm.
It is composed of modified leaves (petals, sepals, stamens, and carpels). The parts of a flower are both male and female.
Slide 43 / 86
Structure of a Flower
Sepals are green and protect the flower buds.
Slide 44 / 86
Structure of a Flower
Petals are large, colorful, showy, and used to attract pollinators.
Slide 45 / 86
Structure of a Flower
Stamens are male structures with pollen-bearing anthers on the tip of a filament. The pollen grains deliver the sperm nuclei to the females.
Slide 46 / 86
Structure of a Flower
Carpels are female structures composed of the stigma and ovary. Inside the ovary are the ovules which carry the developing egg and supporting cells.
Slide 47 / 86
12 The male organ of the flower is the:
A style
B stamen
C carpel
D sepal
Slide 48 / 86
13 In a typical flower, the parts that play the main role attracting animal-pollinators are the:
A petals
B fruits
C stigmas
D sepals
Slide 49 / 86
14 The outer surface of a rosebud, before it opens up into bloom, consists of the:
A petals
B stamen
C ovary
D sepals
Slide 50 / 86
15 In this picture of a lily, the arrow is pointing to the:
A stamen
B petal
C sepal
D stigma
Slide 51 / 86
16 Review: look at photo and determine what type of angiosperm this flower is.
A monocot
B dicot
C vegetative
D fertilized
How did you determine that?
Slide 52 / 86
Fertilization
· The development of pollen and ovules culminates in fertilization.
· All seed plants alternate between a diploid sporophyte generation that produce spores by meiosis and haploid gametophyte generation that produces gametes by mitosis.
· The gametes unite by fertilization to form a diploid zygote which is the first cell of the next sporophyte generation.
Slide 53 / 86
Slide 54 / 86
Male GametophytesThe male gametophyte is the two-celled pollen grain. It undergoes meiosis in the anther and develops into spores. Each spore then develops mitotically to produce two haploid cells, a tube cell, and a generative cell.
The outer wall of the pollen grain is thick and resistant to damage.
Slide 55 / 86
17 Which flower part produces male gametophytes?
A carpels
B anthers
C sepals
D stigmas
Slide 56 / 86
Female Gametophytes
The female gametophyte develops inside the ovule.
One central cell undergoes meiosis and develops into a spore.
Slide 57 / 86
The nucleus in the spore divides (through mitosis) and forms the embryo sac. This is the female gametophyte.
The embryo sac contains a large cell with two haploid nuclei.
The specialized ovary tissue at the base of the carpel also houses a haploid egg.
Female Gametophytes
Slide 58 / 86
18 In the flowering plant, eggs are produced in the:
A stamens
B sepals
C ovules
D stigma
Slide 59 / 86
Pollination
Pollen is usually wind or animal dispersed.
Slide 60 / 86
Pollen Germination
Pollination occurs when the pollen from one flower is delivered to the stigma of another flower.
After pollination, the grain germinates and a tube cell grows in the pollen tube downward toward the stigma and ovary. The generative cell divides (through mitosis) and forms two sperm.
Once the tube reaches the ovule, it releases both sperm.
TED Talks : "The hidden beauty of pollina tion", Louie Schwartzberg (07:40)
Slide 61 / 86
Double Fertilization
Fertilization occurs in the ovule.
One sperm fertilizes the egg forming a zygote (2n, diploid) which develops into the plant embryo.
The other sperm fuses with the 2 central nuclei in the ovule and forms a triploid (3n) nucleus which develops into the endosperm tissue which nourishes the embryo in the seed.
Slide 62 / 86
19 In angiosperms, the process of _________ ensures that the endosperm will develop only in ovules containing a fertilized egg.
A cytogenesis
B meiosis
C mitosis
D double fertilization
Slide 63 / 86
REVIEW Drag the names to label the Flower
stigmacarpel
anther
filamentstamen
petal
sepal
ovuleovary
style
Slide 64 / 86
Ovule develops into a seed
Within the ovule, the diploid zygote divides, developing into the embryo.
With the first division, one cell becomes the embryo, the other cell becomes a thread that forces the embryo into the endosperm.
Near the end of maturation, the seed loses its water and develops a hardened seed coat.
Slide 65 / 86
Seed Dormancy
Some seeds develop only to a point and then further development is suspended. The purpose of this is to allow time for dispersal.
Seasonal conditions also play a role in seed dormancy, with the plant only continuing its maturation when conditions are right. An example of this is chemical dormancy, wherein a seed contains substances (often hormones) to keep the seed dormant for a period. Once these chemicals are washed away (for example by snow melt or spring rains ) the seed can germinate.
Slide 66 / 86
Monocot and Dicot Seed DifferencesRemember that seeds of dicots have 2 cotyledons which absorb endosperm nutrients and take over the role of nourishment.
The seed of a monocot is actually a fruit with one seed inside.
Corn seeds (the kernels) consist of a protective sheath, the embryonic root and shoot, and a large endosperm.
dicot
monocot
Slide 67 / 86
Ovary develops into a fruit
The ovary of a flower changes into a fruit with the release of hormones following fertilization.
The fruit houses and protects the seed, as well as aiding with the dispersal.
Slide 68 / 86
Pod Formation
There are 3 steps to pod formation in a plant 1. pollination takes place
2. petals drop from the flower and ovaries start to grow
3. ovaries form the pod (or fruit)
Slide 69 / 86
Variations in Fruit
Fruits are very varied in organization
How many ovules, how many ovaries, how many carpels, how many flowers are involved and how the fruit is dispersed all account for the variations in fruits.
Slide 70 / 86
Types of fruit
A peach is an example of a simple fruit.
A raspberry is an example of an aggregate fruit.
A pineapple is an example of a multiple fruit, one which develops from many united flowers.
Slide 71 / 86
20 Flowers bear seeds in protective areas called:
A cones
B ovaries
C germination chambers
D sepals
Slide 72 / 86
21 In the fully mature ovary, the vessel that houses the seed is the:
A ovule
B seed
C fruit
D cotyledon
Slide 73 / 86
Dicot seed germination
In dicots, the root emerges first, followed by young seeds which exit the seed in a hooked shape that protects the meristem.
Once the shoot exits the soil, light stimulates the shoot to straighten and the first leaves develop and begin photosynthesis.
The cotyledons remain in the soil and decompose.
http://www.youtube .com/watch?v=d26AhcKeEbE
Slide 74 / 86
22 Which of these structures is first to emerge from a germinating dicot seed?
A root
B hook shoot
C cotyledon
D root hair
Slide 75 / 86
Monocot seed germination
In monocots, the root emerges first, followed by shoots that do not develop into a hook.
The shoots are protected by the abrasive soil by a sheath that surrounds them until they break through the surface.
The cotyledon remains in the soil and decomposes.
http://www.youtube .com/watch?v=iFCdAgeMGOA
Slide 76 / 86
23 What eventually happens to the cotyledons of monocots and dicots?
A provide strength to the plant
B they form the leaves
C they remain in the soil and decompose
D they form the next ovule in the plant
Slide 77 / 86
Asexual Reproduction - cloning
Vegetative propagation is the production of offspring from a single parent.
The offspring are called clones and are genetically identical to the parent.
Slide 78 / 86
Asexual reproduction often involves fragmentation into separate parts, each part developing into a new plant.
A garlic bulb is an underground stem that will fragment into cloves, each developing into a new plant.
Asexual Reproduction - fragmenting
Slide 79 / 86
Advantage to fragmenting
The advantage for this is each offspring is well suited to its immediate environment.
Fragmented offspring are less fragile than seedlings.
Slide 80 / 86
24 Genetically identical organisms which result from asexual reproduction are called:
A clones
B seeds
C twins
D meristems
Slide 81 / 86
25 Which plant part commonly contributes to asexual reproduction?
A fruits
B shoots
C roots
D stems
Slide 82 / 86
Modern Agriculture
Many ornamental trees are propagated through asexual reproduction by leaf and stem cuttings
Propagation can also be done genetically through engineered plants (called GMOs - Genetically Modified Organisms)
The disadvantage to this is the crop plants which come from cloning have low levels of genetic diversity and they are easily devastated by disease.
Slide 83 / 86
Slide 84 / 86
26 Which of the following shows the disadvantage to cloning as a propagation technique?
A its expensive
B its time consuming with slow results
C the plants can be easily wiped out by disease
D it requires a lot of farming space
Slide 85 / 86
27 Foreign genes can be inserted into a plant cell and then cultured to produce:
A seeds
B genetically modified plants
C clones of the original plant
D plants that never die
Slide 86 / 86