Analyzing Past Winning Numbers Lottery Game: Expert Lotto 6/49 (Demo Lottery) – Expert Lotto 5

Main Menu > Right Click > Package > Insert > Full Wheel

Right Click > All

Right click the up arrow to the right of “from a pool of” until the value reaches 49 or change the total in the box to 49. This is the maximum number of balls in this lottery game. You should see a total of 13, 983,816 sets to the right of Create

Click the Tab labeled “Package Table”. At the lower right hand corner you should see Package: 13,983,816. This is the total number of possible sets in the 6/49 Demo Lottey game.

Click the Tab labeled “Winning Numbers Table”

From the Main Menu > Click > “Winning Numbers > from the drop-down menu select “Analyze” or use the short cut key on your keyboard Alt + Shift + A.

The “Ticket Analyzer” window will open.

We want to analyze 30 latest draws. So we click the “Select” button.

The “Select Draws” window will open.

Next, we want to adjust the “Latest Draws” from 10 to 30. Click the top arrow to adjust the 10 to 30 or just use your mouse and click inside the box and change the 10 to 30.

Click the “OK” Button at the bottom.

Click the “Next” button at the bottom of the “Ticket Analyzer” window.

The Ticket Analyzer > Select Statistics” window will open.

Use your mouse and click inside the empty box to the left of “All”. This will also automatically place a check mark in all of the “Available Statistics” boxes below.

Click the “Finish” button at the bottom of the “Ticket Analyzer” window.

A new tab will be added called “Adjacent Digits [Analyzer]”.

To the right of “Show:” Click the down-arrow. This will present you with a list of available filters.

From the list select “Ticket Numbers”. Should be the 7th or 8th selection from the very bottom. Notice the tab name changes to “Ticket Numbers [Analyzer]”

The table below shows the “Occurrence” of the 49 main numbers in the last 30 draws.

If you click the “Occurrence” heading, this will sort the Occurrence values from high to low or low to high. Click the “Occurrence” heading 2 times so that the highest occurrence value of 10 is located at the top.

Using your mouse, at the very top line, click the number 10 and holding your left mouse button, drag your mouse until all the “Occurrences” from 10 down to the last 5 are selected and highlighted in blue. We have selected the top 5 frequencies (10, 8, 7, 6, and 5). There are 14 pool numbers with such frequencies. 23,12,25,3,19,1,6,11,13,20,29,30,32,33

Click the icon “Filter tickets in the package”. See arrow below.

The “Statistical Properties Filter” will open.

Next, we want to adjust the “At least” to the value of 2 and also “to” to a value of 3. So we want 2 to 3 numbers from our list of 14 in each of our ticket sets.

Click the “OK” button at the bottom of the “Statistical Properties Filter” window.

Expert Lotto will filter the package of 13,983,816 sets. Notice in the far right hand lower corner the sets in the package are now 7,147,140

Next, we want to click the “Occurrence” heading again and this time we want the smallest values to appear at the top which is a zero (0) for the number 45. Use your right mouse button and click the “Occurrence” heading until you see the list from zero (0) at the very top. See image below.

Using you mouse, click the zero and holding down your right mouse button drag your mouse so that you select all occurrences 0, 1, and 2. There are 13 number total.

Click the icon (see arrow below) filter tickets in the package.

Next, we want to adjust the “At least 6 to 6 in each ticket settings To the following “At least 1 to 2 in each ticket”

We adjusted the settings “At least 1 to 2 in each ticket”. See below.

Click the “OK” button located at the bottom of the “Statistical Properties Filter” window.

Notice after the calculations the total package is now reduced to 5,179,174 sets from the previous 7,147,140 sets.

We are done!! We have about 5 million tickets (lines). Each ticket has 2 to 3 most frequent numbers and 1 to 2 least frequent numbers from the last 30 draws. Seems like a good start for additional filtering….