Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Type of 12 V OutputOutput + (+12 V)
Output -
*The models above are knob-controlled volume models. Semi-fixed volume models that are adjusted using a screwdriver are also available. For these models, the end of the model name is H.*For details on external controls, see page 104.
External ON/OFF cable IC-CB-D※(for IDPA-30M2) LED output connector SMP-02V-BC
Pin No.12
*Cables are also available in lengths other than those indicated above. *SM connectors are made by JST.
ModelIC-CB-D1
Length(m)12345
10
VCTF 0.3SQ×4coresFinishid outer diameter φ5.2
SMR-04V-B
30mmLength(m)
IC-CB-D2IC-CB-D3IC-CB-D4IC-CB-D5
7IC-CB-D7IC-CB-D10
Pin No.
1234
Wire Color
WhiteGreenRedBlack
User side
Open collector
(Maximum capacity of
50 mA)
GND
EXT CONT CONNECTOR
GND
Inside power supply User side
Sequencer
Relay contact
GND
EXT CONT CONNECTOR
GND
Inside power supply
Example of external ON/OFF connection(IDPA-30M2)
・A current of about 10 mA is applied between connector pins 1, 2, and 3 and pin 4.Use an open-collector circuit with a capacity of about 50 mA to be on the safe side.
・When short-circuiting between pins 3 and 4 in the external ON/OFF control connector, the connector is switched to the external control (The LED light connected to the 2 channels is turned off).
・When short-circuiting between pins 1 and 4 in addition to the above, the LED light connected to LAMP 1 is turned on.In the same way, when short·circuiting between pins 2 and 4, the LED light connected to LAMP 2 is turned on (Switching of the external ON/OFF control is enabled on both channels at the same time).
A. B.
elInput Voltage
Operating FrequencyRated Output
CapacityChannel numbersControl MethodExternal Control
Drawing
IDPA-30M2
30W2CH
1 2
IDPA-50M6AC100~240V
50/60HzDC12V50W6CH
PWM approx. 80kHzExternal On/Off Control
IDPA-100M6
100W6CH
IIHV, IHVE and IBF series can be connected simultaneously by configuring the maximum output currentCommon Power Supply Specifications
As the maximum output current can be set independently for each channel in the range of 100 to 1,000mA, it is possible to simultaneously run the IHV series at 350mA and the IHVE,IBF series at 700mA.The output control range can be varied in 256 levels from 0 mA to the set maximum output current.
1
2
IDCA-1000M4-VIIDCA-1000M4-PIIDCA-1000M4-S2IDCA-1000M4-S4IDCA-1000M4-TPIDCA-1000M8-VIIDCA-1000M8-PIIDCA-1000M8-S2IDCA-1000M8-S4IDCA-1000M8-TP
4CH
8CH
Control Panel Layout
When extention cable selecting, please check the instruction manual
*For details on external controls, see page 104 to 105.
Applicable Lights・IHV ・IHVE ・IBF series
12V DC light (IDR series, etc) *There are limits to lighting that can be connected.
Applicable Lights
Allows simultaneous connection of DC 12V lights and spot lights
The upper row of each channel allows direct connection of DC 12V light, while the lower row allows direct connection of current-control lights such as the IHV, IHVE, and IBF series.
When lights are connected to both the upper and lower rows at the same time, priority is given to lower row output.
IDPA seriesAnalog PWM Power Supply
Simplified analog output control power supplycompact 30W (IDPA-30M2)
Constant-current Power Supply capableof running a wide range of l ights
IDCA seriesMulti-channel Constant-current Power Supply
Analog control power supply Constant-current Power Supply LAN8bit0~5vAnalog 232C 485
11
*The knob shape of -H model is different.
14.7 (9.2)
15
12 106
44
880
130
Rubber foot (x4)
(M3 Depth MAX5)
Power light
< Front > < Side > < Rear >
< Front > < Side > < Rear >
Control knob
(65)
60
7.5 40
55
AC inlet
FG terminal(M4)
External ON/OFF connector(SMP-04V-BC)
2-LED output connector(SMP-02V-BC)
Power switch
22
External ON/OFF connector
Power switch
AC inlet
FG terminal(M4)19316
Control knob
Power supply indicator
95
77
(82)
779
225(16) (10)
Rubber foot (x4)
(M3 Depth MAX5)
6-LED output connector(SMP-02V-BC)
1 2
4-Rubber Foot
(M3 Depth MAX5)
2-DIN railmounting bracket
2-DIN railmounting bracket
4-Rubber Foot
(M3 Depth MAX5)
1(IDCA-1000M4-□)1(IDCA-1000M4-□)
2(IDCA-1000M8-□)2(IDCA-1000M8-□)
*□represents the symbol for the type of external control. VI: Analog 0-5 V, PI: 8-bit parallel, S2: RS-232C communication, S4: RS-485 communication, TP: LAN communication.
< Front >
< Front >
< Side >
< Side >
・ON/OFF control terminals as standard.
・An input voltage of 100 to 240V AC (Power cable supplied as standard is for 100V AC).
・Capable of controlling light in the range of 0 to 100% with a PWM frequency of approximately 80 kHz (Available with semi-fixed volume (H models)).
Variable Output Current System
0mA to maximum output current100~1000mA(each channel can be changed in 10mA increments)
Independent for each channelOutput open, short detection, overcurrent, no load, fan error
AC100~240VMAX DC12V
Output Control MethodInput VoltageOutput VoltageOutput CurrentMaximum Output CurrentExternal ON/OFF ControlProtection Function
External Control DrawingModel Channel numbersAnalog 0-5 V8-bit parallel
RS-232C communicationRS-485 communicationLAN communication
Analog 0-5 V8-bit parallel
RS-232C communicationRS-485 communicationLAN communication
TP TypeTP Type
S2 TypeS2 Type
VI/PI TypeVI/PI Type
S4 TypeS4 Type
93 94
Optional A
ccessories Optional Accessories
Power S
upplies Power Supplies
Coaxial Light C
oaxial Light
Dome Light D
ome Light
Transmissive Light Tr
ansmissive Light
Ring Light R
ing Light
Bar Light B
ar Light
Line Light L
ine Light
INDEX
INDEX
Special Lig
ht Special Light
Power S
upplies Power Supplies