An ISO 9001- 2000 CompanyH.O & Factory : Survey No. 222/1, Che r l apa l l y Road , EC I L Po s t , Hyderabad - 500 062. A.P., India.Ph.: 0091 - 40- 27123508, 27126833, 27121828, Fax : 040 - 27120558.Email : hyd1_klri@sancharnet.in k l r 4 0 0 0 @ k l r u n i v e r s a l . c o m website : www.klruniversal.com

DTH-100 with 10 ft channel mast mounted on TATA-404 Truck with water

injection pump (36 LMP), hydraulic Oil cooler, Single Rod changer etc.

Compressor- 650 CFM @200 PSI

Max Drilling Depth :- 6.5’’-100 Mtrs., 4.5’’ upto 150 Mtrs.

Max Drilling depth :- 100 Mt (~300 Ft)

(Under favorable drilling conditions)

MODEL: KLR-1000/1500/2000

Drill hole size: 6.5” - 12.0” Direct & 14” (O.B)

Max Drilling Depth - 600 Mtr (~2000 Ft)

Advisable Drill rod size: 4.5”

Mounting:-Truck / Skid

(Under favorable drilling conditions)

MODEL: DR-1000/1500/2000

Drill hole size: 8.5” Direct

16” (Reaming )

Max Depth :- 600 Mtr (~2000 Ft)

Mounting:-Truck

(Under favorable drilling Conditions)

MODEL: DTHR-300/450/600

Drill hole size: 6.5” - 10.0” (In case of DTH ) & 14” ( In case of Rotary )

Max Depth :- 600 Mtr (~2000 Ft)

Advisable Drill rod sizes:-3.5” & 4.5” Drill Rod.

Mounting:-Truck / Skid

(Under favorable drilling conditions)

KLR Products

CORE cum DTH cumROTARY DRILL RIG

ECONOMY PACK RIG

DTH DRILL RIG

DTH / ROTARY DRILL RIG

(Under Favorable Drilling Conditions)

CDR-700

NQ/NW-700m

HQ/HW-350m

DTH- 4.5”- 6.5”

DTH Depth 150 Mtr

Rotary 6.5”

Rotary Depth 300 M.

Mounting- Truck

CDR-400

NQ/HQ-400m

HQ/HW-250m

DTH- 4.5”- 6.5”

DTH Depth 150 Mtr

Rotary - 6.5”

Rotary Depth 200Mtr.

Mounting- Truck

CDR-1000

BQ /1275m / HQ 675m

NQ1000m/PQ-500m

DTH- 6.5”- 8.5”

DTH Depth 250 Mtr

Rotary 8.5”

Rotary Depth 500 Mtr.

Mounting- Truck

CDR-1500

NQ -1500 Mt

HQ-700 Mt

PQ-500 Mt

DTH 8.5” max

Depth - 900Mt1Rotary: 12 /4” max

Depth:- 1000 Mt

Mounting:- Truck

KLR INDUSTRIES LIMITED An ISO 9001- 2000 Company

For DTH Drilling suitable compressor on support vehicle

For DTH Drilling suitable compressor on support vehicle

DIRECT ROTARY DRILL RIG

KLR Products

MODEL : KWD-100 Drive -Hydraulic & PneumaticDrill hole size: 3.0”-4.5”Max. Depth: 36 Mtrs. (118 Feets)Mounting:- Self Propelled Type.( Under favorable Drilling Conditions )

MODEL: In-Well DrillingDrive- Hydraulic & PneumaticDrill hole size: 4.5”Max. Depth: 100 Mt.(~330 Ft )Mounting:- Dismantled Type, Tri Pod.( Under favorable Drilling Conditions )

Model: TMR-40Drilling Capacity 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Mounting:- Two Wheel Single Axle ( Dummy ) Trailer.( Under favorable Drilling Conditions )

Model:TBW-40/TC-40Drilling Capacity 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Mounting:- Suitable Tractor.(Under favorable Drilling Conditions )

KLRHand pump

Model: ITD46Capable of Angle drilling,Boom swing 40*, L&RDrilling Capacity 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Max.Hole Spacing- 5 Mt (L&R)( Under favorable Drilling Conditions )

WAGON DRILL RIG

INWELL DRILL RIG

TRAILER MOUNTED DRILL RIG

TRACTOR MOUNTED HYDRAULIC RIG

Model: CDR-50/CDR-150 DTH DRILL CAPACITY 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Mounting:- Skid / Truck( Under favorable Drilling Conditions ) Core - NQ / NW150 - HQ / HW 50 Mtrs.

CRAWLER MOUNTEDBLAST HOLE DRILL RIG

SELF PROPELLED SKIDMOUNTED RIG (CORE CUM DTH)

DEEP WELL HAND PUMP

S No. Type Depth Discharge per Minute

1 INDIAN MARK II 20-40 Mtr. 15 Ltr.2 MARK III (V.L.O.M 65 ) 20-30 Mtr. 15 Ltr.3 MARK III (V.L.O.M 50 ) 20-50 Mt. 10 Ltr.4 Ex.D.W Mark IV 40-90 Mtr. 12 Ltr.5 AFRIDEV 20-45 Mtr. 20 Ltr.

An ISO 9001- 2000 Company

DTH HAMMERS

VALVE TYPE

17 /4Size Range :- 2 /8”-17 ” according to IADC 1-1-1 to IADC 7-3-2

Max Dig Depth - 4.2 mExcavator Capacity - 0.24 Cu.mLoader Capacity - 1.0 Cu.m

VALVE LESS TYPE

CLUSTERHAMMER (HIPPO)

DTH BITS

U-DEX SET

POLE ERECTION M/C

DTH- Auger : Q24.0” - 6 Ft

Q12.0” - 10 Ft Q - 12 Ft 8.0”

KLR (VERSATILE 400)

( In view of continuos R&D and product improvement programme all specifications, features etc., Are subject to amendments without prior notice )

ROCK ROLLER BITS

VALVE TYPEMODEL : CHEETAH / PANTHER/ D-16/D17SUITABLE BIT SIZES : 3’’ TO 13”OUT SIDE DIAMETER : 62.0 mm TO 173.0 mmEFFECTIVE LENGTH : 1070.0 mm TO 1406 mmAIR CONSUMPTION : 100 TO 350 PSI

80 TO 865 CFM1

VALVE LESSMODEL TIGER / DIGGER/GLADIATOR:SUITABLE BIT SIZES : 3.5’’ TO 17”OUT SIDE DIAMETER : 78.0 mm TO 406.0 mmEFFECTIVE LENGTH : 850.0 mm TO 1406 mmAIR CONSUMPTION : 100 TO 350 PSI 180 TO 2650 CFM

CLUSTER HAMMERMODEL : HIPPOSUITABLE BIT SIZES : 17’’ TO 48”OUT SIDE DIAMETER : 406.0 mm TO 1180.0 mmEFFECTIVE LENGTH : 1405.0 mm TO 1850.0 mmAIR CONSUMPTION 200 TO 250 PSI:

1300 TO 7700 CFM

BITSMODEL : KLR / INGERSOLL RAND / SANDVIK ATLAS COPCO / NUMA / MISSIONSUITABLE BIT SIZES 3’’ TO 17”:OUT SIDE DIAMETER : 76.0 mm TO 420.0 mmSHANK LENGTH 165.0 mm TO 530.0 mm:NO.OF SPLINES : 6 Nos. TO 12 Nos. U-DEX BITSMODEL : KLR CASING SIZE PRODUCT RANGE : 68.0 mm 73.0 mm ( 2.875” ) : 115.0 mm 141.3 mm ( 5.56” ) : 140.0 mm 168.3 mm ( 6.625” ) : 190.0 mm 219.0 mm ( 8.625” )

SHANK LENGTH : 165.0 mm TO 400.0 mmNO OF SPLINES : 6 Nos. TO 12 Nos.

TRACK RECORD

SWEDEN

TURKEY

SUDAN

NIGERIA

GHANA

UGANDA

TANZANIA

ZAMBIA

SOUTH AFRICA

MAURITUS

NEPAL

KOREA

BANGLADESH

SRILANKA

KENYA

LEBANON

ETHIOPIA

CANADA

USA

SYRIAQATAR

UAEOMAN

KUWAT

CONGO

BURKINOFASA

KLR’s inherent confidence has its roots in its success story in Mother INDIA, Drilling with ease in varying terrains of this vast country be it the Desert lands of Rajasthan, Rocky terrains of Southern India, lofty terraces of Himalayan region, Alluvial lands of Gangetic planes - bringing succor to millions of rural population, farmers etc suffering from cyclic droughts, poor irrigation, lack of potable water etc.,

Emboldened by this experience KLR ventured out early in to distant EXPORT markets, particularly the developing world desperately in need of providing basics of living to their impoverished masses. No wonder, KLR’s Drilling equipments gained instant acceptance- by virtue of “STATE-OF-THE-ART APPROPRIATE TECHNOLOGY” and incredibly low Investment & Operational costs. KLR’s Customer Services rendered usage and full utilization of the machines.

TODAY KLR DRILL RIGS ARE PERFORMING SATISFACTORILY AND CAN CLAIM TO BE THE CUSTOMER’S FIRST CHOICE IN THE FOLLOWING COUNTRIES-

KENYA, UGANDA, TANZANIA, ZAMBIA, NIGERIA, SUDAN, MAURITIUS, ETHIOPIA, GHANA, LEBANON, MALAWI, SENEGAL, BURKINOFASA, TURKEY, QATAR DUBAI, SRILANKA, BANGLADESH, NEPAL, NEWZELAND, SOUTH KOREA, USA, CANADA, and SWEDEN.

In over 5 countries KLR have established Joint Ventures to provide Drilling Services and also established wide marketing network. Few projects for local manufacture of Drilling equipments, Tools etc are also in the planning stage .

An ISO 9001- 2000 Company

H.O & Factory :Survey No. 222/1, Cherlapally Road, ECIL Post, Hyderabad - 500 062. A.P., India.Ph.: 0091 - 40- 27123508, 27126833, 27121828, Fax : 040 - 27120558.

website : www.klrindustries.com : www.klruniversal.com : www.klr.in

Email : hyd1_klri@sancharnet.in : geetha@klruniversal.com: klr4000@klruniversal.com

Mast with Mud Pump Compressor Supports Vehicle

Mobile Workshop