19
An Alternative Energy Solution for Medical Waste The Easy Fit

An Alternative Energy Solution for Medical Waste The Easy Fit

Embed Size (px)

Citation preview

  • Slide 1

An Alternative Energy Solution for Medical Waste The Easy Fit Slide 2 The Easy Fit Concept The industry for the treatment and disposal of waste from hospital institutions is an ever increasing challenge; risk of infectious diseases migrating outside the facilities; integrity of confidentiality; costs of disposal; odour migration. The Easy Fit technology is a solution that mitigates these challenges Slide 3 The Easy Fit Concept The Easy Fit technology is a unique, one-of-a-kind, 1 tonne per day (2,662 lbs) system that is unparalleled in concept and capability to convert waste and garbage materials into thermal energy and over 400 litres per day of hot water. In a process that is as clean as if the thermal energy was produced by natural gas. Slide 4 The Easy Fit Concept The Easy Fit meets the growing desires of Hospital Trusts who are now encouraging the control and responsibility of energy consumption and carbon reduction. With low cost, low maintenance, ease of use, plus the Easy Fits ability to convert waste to energy AT SOURCE, the Unit will provide a hospital with a valuable disposal option for waste. Slide 5 The Easy Fit Concept Typically, the amount of medical waste could be lower if not contaminated by general waste which increases the overall disposal costs. The Easy Fit technology solves this problem by processing all of the waste categories regardless of cross contamination. The system requires minimal resource, space and staff time further reducing the costs for waste management. Slide 6 The Easy Fit Concept The technology has the ability to process each of the five waste categories; medical, bio-hazardous, confidential, pharmaceutical and general waste onsite and at the same time is 100% energy efficient. Slide 7 The Easy Fit Concept The units ultra low emissions are typical to that of a high efficiency natural gas boiler of the same size in thermal capacity. No unsightly stacks are required, only an exhaust vent with an exit temperature of approximately 70 degrees Celsius. Slide 8 The Easy Fit Concept The Easy Fit solution achieves the highest levels of protection against migration of infectious diseases and pathogens from hospitals, virtually eliminates high cost disposal fees, reduces odours over current practices and produces a net energy balance during operation for energy input requirements Slide 9 The Easy Fit Concept Small Footprint. 50 sq metres Height