Copyright Stamp With Amy K 2020 Coming Home Christmas Card Instructions for the project: 1. Adhere the 4″ x 5-1/4″panel of Poppy Parade DSP from the Brights 6” x 6” DSP pack to the front of the Poppy Parade card base with Multipurpose Liquid Glue. 2. Cut the panel of Snowflake Splendor DSP (available Aug 4) with the 2 nd largest of the wide rectangles from the Stitched Rectangle Dies. 3. Cut the rectangle into two pieces so that the top half is approximately 3-3/4” long. 4. Adhere the two die cut rectangles one on top of the other with Stampin’ Seal so that the seam between the two papers will be hidden under the sentiment strip near the bottom. 5. Cut the two house images and the tree image from the Trimming the Town DSP (available Aug 4) with the coordinating Home Together Dies (available Aug 4). 6. Adhere the three die cuts to the card front with Stampin’ Seal. 7. Stamp the sentiment from the Tree Angle photopolymer stamp set (available Aug 4) in Poppy Parade ink on the 1/2” x 4-1/2” strip of Whisper White card stock. 8. Snip the end of the sentiment strip at an angle and adhere the sentiment strip to the card front with Stampin’ Dimensionals. 9. Adhere three Red Rhinestone Basic Jewels around the sentiment. Link to the original blog post for this project: https://wp.me/p2SFwf-kiT Card stock cuts for this project: • Poppy Parade – 5-1/2″ x 8-1/2″ card base scored at 4-1/4″ • Whisper White – 1/2″ x 4-1/2″ strip, 4″ x 5-1/4″ panel (inside card) • Brights 6″ x 6″ Designer Series Paper – 4-1/4″ x 5-1/2″ panel, 5/8″ x 5-1/4″ panel (inside card) • Snowflake Splendor Designer Series Paper – Stitched Rectangle die cut • Trimming the Town Designer Series Paper – three Home Together die cuts Amy Koenders Email: [email protected] website: https://stampwithamyk.com

Amy Koenders Coming Home Christmas Card website: … · 2020-07-27 · 6. Adhere the three die cuts to the card front with Stampin’ Seal. 7. Stamp the sentiment from the Tree Angle

Download PDF Report

Upload
others
View
0
Download
0

Embed Size (px)

Citation preview

CopyrightStampWithAmyK 2020

Coming Home Christmas Card

Instructions for the project:

1. Adherethe4″x5-1/4″panelofPoppyParadeDSPfromtheBrights6”x6”DSPpacktothefrontofthePoppyParadecardbasewithMultipurposeLiquidGlue.

2. CutthepanelofSnowflakeSplendorDSP(availableAug4)withthe2ndlargestofthewiderectanglesfromtheStitchedRectangleDies.

3. Cuttherectangleintotwopiecessothatthetophalfisapproximately3-3/4”long.4. AdherethetwodiecutrectanglesoneontopoftheotherwithStampin’Sealsothattheseam

betweenthetwopaperswillbehiddenunderthesentimentstripnearthebottom.5. CutthetwohouseimagesandthetreeimagefromtheTrimmingtheTownDSP(availableAug4)

withthecoordinatingHomeTogetherDies(availableAug4).6. AdherethethreediecutstothecardfrontwithStampin’Seal.7. StampthesentimentfromtheTreeAnglephotopolymerstampset(availableAug4)inPoppy

Paradeinkonthe1/2”x4-1/2”stripofWhisperWhitecardstock.8. Sniptheendofthesentimentstripatanangleandadherethesentimentstriptothecardfront

withStampin’Dimensionals.9. AdherethreeRedRhinestoneBasicJewelsaroundthesentiment.

Link to the original blog post for this project: https://wp.me/p2SFwf-kiT Card stock cuts for this project:

• Poppy Parade – 5-1/2″ x 8-1/2″ card base scored at 4-1/4″

• Whisper White – 1/2″ x 4-1/2″ strip, 4″ x 5-1/4″ panel (inside card)

• Brights 6″ x 6″ Designer Series Paper – 4-1/4″ x 5-1/2″ panel, 5/8″ x 5-1/4″ panel (inside card)

• Snowflake Splendor Designer Series Paper – Stitched Rectangle die cut

• Trimming the Town Designer Series Paper – three Home Together die cuts

Amy Koenders Email: [email protected]

website: https://stampwithamyk.com

Page 2: Amy Koenders Coming Home Christmas Card website: … · 2020-07-27 · 6. Adhere the three die cuts to the card front with Stampin’ Seal. 7. Stamp the sentiment from the Tree Angle

CopyrightStampWithAmyK 2020

10. StampthesentimentfromtheTreeAnglestampsetinPoppyParadeinkonthe4"x5-1/4"panel

ofWhisperWhitecardstock.11. Adherethe5/8”x5-1/4”stripofPoppyParadeDSPtothepanelwithStampin’Seal.12. AdherethestampedpanelinsidethecardbasewithStampin'Seal.

Below is a list of supplies used to create this project. Please click on the links to the right to see and purchase the available item(s) in my online store:

• TreeAnglePhotopolymerStampSet[153442]-Price:$17.00-http://msb.im/rRU• HomeTogetherDies[153515]-Price:$34.00-http://msb.im/rRV• StitchedRectanglesDies[151820]-Price:$35.00-http://msb.im/rRW• Brights6"X6"(15.2X15.2Cm)DesignerSeriesPaper[152487]-Price:$11.50-

http://msb.im/rRX• TrimmingTheTownDesignerSeriesPaper[153491]-Price:$11.50-http://msb.im/rRY• SnowflakeSplendorDesignerSeriesPaper[153512]-Price:$11.50-http://msb.im/rRZ• RedRhinestoneBasicJewels[146924]-Price:$7.00-http://msb.im/rRa• PoppyParadeClassicStampin'Pad[147050]-Price:$7.50-http://msb.im/rRb• PoppyParade8-1/2"X11"Cardstock[119793]-Price:$8.75-http://msb.im/rRc• WhisperWhite8-1/2"X11"Cardstock[100730]-Price:$9.75-http://msb.im/rRd• Stampin'Seal[152813]-Price:$8.00-http://msb.im/rRe• Stampin'Dimensionals[104430]-Price:$4.00-http://msb.im/rRf• MultipurposeLiquidGlue[110755]-Price:$4.00-http://msb.im/rRg