Amp Net Connect Emea Catalog 2009

European Product Catalog2009AMP NETCONNECT Building Networks

AMP NETCONNECT

Structured Cabling Solutions for Enterprise Networks

The Foundation of Your Company’s Network

Table of Contents

8Index 137

7Tools & Labeling 121

6Cable Management 111

5Universal Outlets/Faceplates (unpopulated) 101

4Ethernet LAN Solutions 93

3Fiber Optic (FO) Cabling Systems 53

2Shielded Twisted Pair (STP) Cabling Systems 27

1Unshielded Twisted Pair (UTP) Cabling Systems 9

Sys

tem

Sel

ecto

r

2 http://www.ampnetconnect.eu

Unshielded Twisted Pair Systems

Item Chapter(s) Page(s)

1 Ethernet Switch 4 97–99

2 Unshielded Twisted Pair Patch Panels 1 12, 13, 15

3 Unshielded Twisted Pair Telephone Panels 1 14

4 Unshielded Twisted Pair Cable Assemblies 1 23

5 Unshielded Twisted Pair Horizontal Cables 1 10

6 Connectors, Couplers, Outlets and Faceplates 1 + 5 20–22 + 102–110

7 Multi-line Telephone Non-NETCONNECT Product –

8 Computer Equipment Non-NETCONNECT Product –

http://www.ampnetconnect.eu

Sys

tem

Sel

ecto

r

Shielded Twisted Pair Systems

3



2 Shielded Twisted Pair Patch Panels 2 30, 31


4 Shielded Twisted Pair Cable Assemblies 2 49–51

5 Shielded Twisted Pair Horizontal Cables 2 28, 29

6 Connectors, Couplers, Outlets and Faceplates 2 + 5 34–36 + 102–110



Sys

tem

Sel

ecto

r


AMP CO Plus System



2 Shielded AMP CO Plus Patch Panels 2 38


4 Shielded Twisted Pair Cable Assemblies 2 49–51

5 Shielded Twisted Pair Horizontal Cables 2 28, 29

6 Outlets and Faceplates 2 46–48

7 System Inserts 2 40–45




Sys

tem

Sel

ecto

r

Power Over Ethernet (PoE)

5



2 Power over Ethernet (PoE) Midspan Units 4 94

3 UTP or STP Patch Panels 1 or 2 12, 13, 15 or 30, 31

4 UTP or STP Cable Assemblies 1 or 2 23 or 49–51

5 UTP or STP Horizontal Cables 1 or 2 10 or 28, 29

6 Connectors, Couplers, Outlets and Faceplates 1 or 2 + 5 20–22 or 34–36 +102–110

7 PoE Telephone Non-NETCONNECT Product –

8 PoE WLAN Access Point Non-NETCONNECT Product –

Sys

tem

Sel

ecto

r


Copper & Fiber Backbone Cabling Systems


1 Fiber Optic Switches 4 98, 99

2 Fiber Optic Patch Panels 3 61–64, 68, 69


4 Fiber Optic Cable Assemblies 3 88–92

5 Fiber Optic Backbone Cables 3 56–60

6 Unshielded Twisted Pair Backbone Cables 1 11


Sys

tem

Sel

ecto

r

Data Center Cabling Systems

7


1 MPO/MPOptimate Trunk Cable Assemblies 3 70, 73

2 MRJ21 Trunk Cable Assemblies (UTP or STP) 1 or 2 17 or 33

3 MPO/MPOptimate Cassettes 3 71, 74

4 MRJ21 Cassettes (UTP or STP) 1 or 2 16 or 33

5 Unloaded Rackmount Panels 1 or 2 + 3 15 or 31 + 63

6 MPO/MPOptimate Fanout Cable Assemblies 3 72, 75

7 MRJ21 Fanout Cable Assemblies (UTP) 1 17

8 Ethernet Switches 4 97–99

9 Active Fiber Module Non-NETCONNECT Product –

10 Active Twisted Pair Module Non-NETCONNECT Product –

11 Fiber Optic Patch Cords 3 88–92

12 Twisted Pair Patch Cords (UTP or STP) 1 or 2 23 or 50, 51

13 Equipment Interface Device Non-NETCONNECT Product –

Wha

t’s

NE

W!


What’s NEW!

MPOptimate System

MRJ21 STP System AMP S-Link

The MPOptimate system is an MPO based solution capable of meeting the requirements of the Data Centerstandards EN 50173-5, ISO/IEC 24764 and TIA/EIA 942.With this system the Data Center owner can design up to 6 MPO cassettes in a channel of up to 300 meters in a fully passive way, while still meeting the insertion andreturn loss values for the Data Center applications such as: 10 Gigabit Ethernet, Fibre Channel and InfiniBand.

By implementing an MPOptimate system the user canreplace aggregation switches with a patch cord. This allows the user to migrate to newer core switchingstructures without touching the cabling infrastructure in the Data Center.

The MPOptimate system is intended for Data Center owners who are planning for next generation applicationsand next generation architectures.

The AMP Sigma-Link Classic is a pre-terminated, fastand easy to install cabling solution for high speedapplications. Performance is guaranteed by 100% factory testing of all AMP Sigma-Link Classic cableassemblies. The far end can be traced by an integratedplastic optical fiber(POF) for easyidentification afterinstallation. Thesystem is designedfor reliable andquick operation in Data Centers. All componentsfully comply toTIA/EIA 942 and EN 50173-5, theData Center spe-cific standards.

AMP Hi-D System Extension Fiber Optic Panels with Quickfit-ModulesThe successful AMP Hi-D Cabling Management Systemhas been further extended to become a comprehen-sive integral platform for professional routing andorganization of your cabling infrastructure. Smartcomponents have been added to address the specificneeds of data centers, such as Heavy Duty Shelves tostore heavy electronic equipment, a Guiding Shelf toroute larger stacks of MRJ21 cables inside a cabinet orFiber Organizer Drum Plates for SANs to handle patchcord overlengths. A subfloor holder makes unusedfalse floor space available for patch panel mounting.

The new Modular Fiber Optic Panel flushmount style is a 19” 1 U fiber drawer patch panel that supportsdirect fiber termination and pigtail splicing. The panelconsists of a drawer chassis and a modular adaptorpanel that is available with traditional style adaptors:ST, SC duplex and LC duplex. In addition a modularadaptor panel with four cut-outs for Quick-Fit modulesis available; this allows the panel to be designed in themost flexible way, so that even AMPTRAC versions arepossible. A transparent cover allows the inside of thepanel to be checked without removing the cover. A pull-out strip below the modular adaptor panels enables effective labeling of the individual ports.

Tyco Electronics introduces an improved high densityshielded copper MRJ21 System for Data Centers. In viewof the increasing demands for uptime and airflow and inorder to satisfy EMC requirements, the system has beenimproved through a new PCB and an optimized overallsystem design. This allows for increased data integrityand provides more performance headroom in EMC sensitive environments. The MRJ21 STP system is pre-terminated and therefore offers fast and easy installationof a high speed cabling system.

Lear

n m

ore

ab

out

thi

s o

n p

ages

70

–72

Lear

n m

ore

ab

out

thi

s o

n p

age

33Le

arn

mo

re a

bo

ut t

his

on

pag

es 1

16–1

18

Lear

n m

ore

ab

out

thi

s o

n p

ages

23

+ 37

Lear

n m

ore

ab

out

thi

s o

n p

ages

61

+ 6

8

System Cables 10

Patch Panels 12

MRJ21 Connector System 16

CrossConnect XC 18

Connectivity 20

Outlets 22

AMP Sigma-Link System 23

RJ-45 Security Key Products 24

Patch Cords 25

1Unshielded Twisted Pair (UTP) Cabling Systems

Unshielded Twisted Pair (UTP) Cabling Systems

l Cost effective components for fast and easy installation

l Complete Systems (System Cable, Patch Panels, Outlets, Patch Cords)

l Available from Cat. 3 up to Cat. 6:– Cat. 6: High-end technology,

Pyramid Tested, Gigabit Ethernet– Cat. 5E: Reliable cost-effective technology,

Gigabit Ethernet– Cat. 3: Standard technology for telephone

applications, very cost effective and high density

l Patch panels & outlets in PCB design or for discrete jacks

l MRJ21 Connector System:– High density modular pluggable cabling

system supporting Gigabit Ethernet– Perfect for Data Center environments

l CrossConnect XC System:– Reliable and cost effective high-density

distribution system– Cat. 5E performance for Data and Voice Applications

l AMP S-Link System:– Pre-terminated high efficiency solution– Perfect for Data Center environments

Uns

hiel

ded

Tw

iste

d P

air

Cab

ling


Uns

hiel

ded

Tw

iste

d P

air

Cab

ling

10

System Cables (Horizontal)

Product Facts:

l 250 MHz Cat. 6 U/UTP Cablel Qualified against IEC 61156-5 Cat. 6 and EN 50288-6-1l Cross web filler to separate the pairs l AWG 23

Color: white

Product Facts:

l 100 MHz Cat. 5E U/UTP Cablel AWG 24

Color: white

Sheathing Type OD Packaging Part Number

PVC Simplex 6,0 mm see table 0-0219584-X

LSZH Simplex 6,0 mm see table 0-0219585-X

LSFRZH Simplex 6,3 mm 500 m/Reel 1-1711166-1

LSZH Duplex 6,2 x 13,0 mm 500 m/Reel 0-1711053-1





-X Packaging

-2 305 m, Reel-In-A-Box-3 1000 m, Reel

Product Facts:

l Exceeds TIA/EIA-568-B Enhanced Category 5 and ISO/IEC 11801:2002 Class D specifications

l Exceeds all requirements for Gigabit Ethernetl Sunlight (UV) resistant for harsh environmentsl Oil resistant, Level IIl Double jacketed – PVCl CMR (Riser) ratedl AWG 24

Color: grey

Sheathing OD Packaging Part Number

Solid conductors 6,4 mm 305 m/Reel 0-1499447-3

Stranded conductors 6,6 mm 305 m/Reel 0-1499448-3

-X Packaging

-2 305 m, Pull-Box-3 1000 m, Reel

Cat. 6 U/UTP 250 MHz Cable

Cat. 5E U/UTP 100 MHz Cable

EtherSeal Cat. 5E U/UTP 100 MHz Cable


Uns

hiel

ded

Tw

iste

d P

air

Cab

ling

11

Uns

hiel

ded

Tw

iste

d P

air

Cab

ling

System Cables (Backbone)

11

Product Facts:

l Cat. 5E UTP Backbone Cablel 25 Pair constructionl AWG 24l UL listed

Color: white

Product Facts:

l Cat. 3 Telephone Backbone Cablel AWG 24l LSZH Jacket

Color: white


CMR 13,0 mm 305 m/Reel 0-1499418-1

No. of Pairs OD Packaging Part Number

25 13,0 mm 500 m/Reel 0-1711494-1

50 16,0 x 29,0 mm 500 m/Reel 0-1711495-1

100 35,0 mm 500 m/Reel 0-1711496-1

25 Pair Cat. 5E PowerSum Backbone Cable

Multi-Pair Cat. 3 Backbone Cable

Product Facts:

l 250 MHz Cat. 6 U/UTP cablel double jacketed:

– inner jacket material: PE– outer jacket material: LSZH

l AWG 23l For aerial usel Suitable in an IP65 environment

Color : black


LSZH 7,2 mm 500 m/Reel 0-1711006-1

Cat. 6 U/UTP Outdoor Cable

Uns

hiel

ded

Tw

iste

d P

air

Cab

ling


Patch Panels

Product Facts:

l 190, RJ-45 patch panel (except 12 port)l 12-Port Panel mounts vertically on 89D bracket (included)l Cat. 6 Pyramid Tested (see page 143)l Ports may be exchanged individuallyl Universal wiring – T568 A or B wiring patternl Incl. strain reliefl Replacement labels and clear label covers on page 135l Can be supplied with jacks loose packed to allow easier installation

No. of Ports Height Color Part Number

12 mounts vertically black (RAL 9005) 0-1375013-2

24 1 U black (RAL 9005) 0-1375014-2

48 2 U black (RAL 9005) 0-1375015-2

Description Color Part Number

Cat. 6 Full AMPTRAC patch panel black (RAL 9005) 0-1711147-1

Cat. 6 AMPTRAC Ready! patch panel black (RAL 9005) 0-1711147-2

Cat. 6 AMPTRAC Ready! patch panel grey (RAL 7035) 0-1711147-3

I/O Upgrade Kit from AMPTRAC Ready! to full AMPTRAC black (RAL 9005) 0-1711148-1


Cat. 6 – inclined patch panel black (RAL 9005) 0-0336653-2

Product Facts:

l 190, 1 U, RJ-45 patch panel with 24 portsl Cat. 6 Pyramid Tested (see page 143)l Inclined design for ergonomic terminationl Ports may be exchanged individuallyl Universal wiring – T568 A or B wiring patternl Replacement labels and clear label covers on page 135

Cat. 6 – Compact Patch Panel

Cat. 6 – AMPTRAC Ready! Patch Panel

Cat. 6 – SL 110C Patch Panel without Rear Cable Management

Cat. 6 – Inclined SL 110C Patch Panel with Rear Cable Management


190 RJ-45 patch panel black (RAL 9005) 0-1711544-2

190 RJ-45 patch panel grey (RAL 7035) 0-1711544-4

Product Facts:

l 190 RJ-45 patch panel with 24 ports on 0,5 Ul Half size compact designl Cat. 6 Pyramid Tested (see page 143)l 10 Gigabit Ethernet readyl Strain relief, VDE grounding bolt and cable managementl Universal wiring – T568 A or B wiring patternl Protected PCB

Product Facts:

l 190, 1 U, RJ-45 Patch Panel with 24 portsl AMPTRAC Ready! version: prepared for AMPTRAC upgrade l Full AMPTRAC version:

fully equipped with AMPTRAC functionality l Cat. 6 Pyramid Tested (see page 143)l LSA+™ tool compatible enhanced 110 IDC blocksl Rear cable managementl Universal wiring – T568 A or B wiring patternl Protected PCB

For moreInformation see page 143


Uns

hiel

ded

Tw

iste

d P

air

Cab

ling

Patch Panels

13

Product Facts:

l 190, 1 U, RJ-45 patch panel with 24 or 48 portsl Cat. 5El LSA+™ & 110Connect compatible connecting blocksl Universal wiring – T568 A or B wiring pattern

Color: black (RAL 9005)

No. of Ports Height Part Number

24 1 U 0-0336695-2

48 1 U 0-1711284-1

Cat. 5E – PCB Patch Panels with Rear Cable Management

Description Part Number

Cat. 5E – inclined patch panel 0-0336647-1

Product Facts:

l 190, 1 U, RJ-45 Patch Panel with 24 portsl Cat. 5El With rear cable managementl Inclined design for ergonomic terminationl LSA+™ & 110Connect compatible connecting blocksl Termination also with 5 Pair tool supportedl Universal wiring – may be terminated to T568A or T568B l Replacement labels and clear label covers on page 135


Cat. 5E – Inclined 6Block Patch Panel with Rear Cable Management

Product Facts:

l 190, RJ-45 patch panel (except 12 port)l 12-Port Mini Patch Panel mounts vertically

on 89D bracket (included)l Cat. 5E l SL 110 version: Ports may be exchanged individuallyl 6Block version: LSA+™ & 110Connect compatible connecting

blocks (termination also with 5 Pair tool supported)l Universal wiring – T568 A or B wiring patternl Replacement labels and clear label covers on page 135l Can be supplied with jacks loose packed to allow

easier installation


No. of Ports Height Version Part Number

12 mounts vertically SL 110 0-1479153-2

24 1 U SL 110 0-1479154-2

48 2 U SL 110 0-1479155-2

12 mounts vertically 6Block 0-0406390-1

24 1 U 6Block 0-0406330-1

48 2 U 6Block 0-0406331-1

Cat. 5E – Patch Panel without Rear Cable Management (SL 110 or 6Block)

Uns

hiel

ded

Tw

iste

d P

air

Cab

ling


Patch Panels

Product Facts:

l 190, 1 U, telephone panel with 25 portsl Active Pin-out: 36,45l Conductor diameter range from AWG 26–23

(0,4–0,6 mm)

Product Facts:

l 190, 1 U, telephone panel with 50 portsl AMPTRAC Ready! high-end versionl Active Pin-out: 36,45l Conductor diameter range from AWG 26–22

(0,4–0,65 mm)l Easy upgrade to AMPTRAC Infrastructure

Managementl Rear cable management for multipair cablesl 110Connect blocks for conductor insulation

diameters up to 1,28 mm

Product Facts:

l 190, 1 U, telephone panel with 50 portsl Active Pin-out: 36,45l Conductor diameter range from AWG 26–23

(0,4–0,6 mm)


25 port economy telephone panel 0-1711213-X

-X Color

-2 black (RAL 9005)-3 light grey (RAL 7035)


50 port economy telephone panel 0-1711214-X

-X Color


-X Color

-1 light grey (RAL 7035)-2 black (RAL 9005)-4 green (RAL 6032)


AMPTRAC Ready! 50 port panel 0-1394060-X

I/O upgrade kit to full AMPTRAC 0-1435954-1

Cat. 3 – 25 Port Telephone Patch Panel

Cat. 3 – 50 Port Telephone Patch Panel

Cat. 3 – AMPTRAC Ready! 50 Port Telephone Patch Panel


Uns

hiel

ded

Tw

iste

d P

air

Cab

ling

Patch Panels

15

-X Color


Product Facts:

l 190 Standard unloaded flushmount panel to be equipped with different SlimLine jacks (see pages 20/21)

l Including VDE 0100 ground clampl Holds up to 24 modular SL jacks l Ports are iconable (see page 133)

Description Height Part Number

24 port panel 1 U 0-0336526-X

Flushmount Standard Patch Panel (unloaded)

AMP Hi-D 1 U Modular Panel (unloaded)

Product Facts:

l 190 1 U angled modular patch panel to be equipped with different SlimLine jacks (see pages 20/21)

l Adjustable & removable rear cable bracket incl.easy to use cable organizing CaRe-clips

l AMP Hi-DXT includes cable managersl AMPTRAC functionality only applicable for jacks without dustcoverl Including grounding bolt



Full AMPTRAC unloaded flushmount panel black 0-1711685-4

AMPTRAC Ready! unloaded flushmount panel black 0-1711685-1

AMPTRAC Ready! unloaded flushmount panel light grey 0-1711685-2

I/O Upgrade Kit from AMPTRAC Ready! to Full AMPTRAC* black 0-1711148-1

* AMPTRAC functionality not applicable for jacks with dustcover

Product Facts:

l 190 unloaded flushmount patch panel to be equipped with different SlimLine jacks (see pages 20/21)

l AMPTRAC Ready! version: prepared for AMPTRAC upgrade l Full AMPTRAC version: fully equipped with AMPTRAC functionality l Holds up to 24 SL Jacks

Flushmount AMPTRAC Ready! Patch Panel (unloaded)


AMP Hi-D modular panel UTP 1-1671157-1

AMP Hi-DXT modular panel UTP 1-1671158-1

AMP Hi-D Full AMPTRAC modular panel UTP 1-1671136-1


Flushmount Modular Panel 1-1671183-1

Flushmount Full AMPTRAC Modular Panel 1-1671187-1

Flushmount Modular Patch Panel (unloaded)

Product Facts:

l 190 1 U unloaded flushmount panel to be equipped with different SlimLine jacks (see pages 20/21)

l Including grounding boltl AMPTRAC functionality not applicable for jacks with dustcover


Description MRJ21 Plugs RJ-45 Ports Part Number

Standard straight panel for 1000Base-T 4 24 0-1777029-1

AMPTRAC straight panel for 1000Base-T 4 24 0-1777029-2





MRJ21 Patch Panel, 1 U, Straight, Unshielded

Uns

hiel

ded

Tw

iste

d P

air

Cab

ling


MRJ21 Connector System

Product Facts:l High-performance TP cabling for guaranteed application performancel High-density, small form factor connectivityl Factory terminated and tested solutionl Modular, pluggable solutionl Application specific cassettesColor: black (RAL 9005)


Snap-In cassette for 100Base-T 1 12 0-1479452-1

Snap-In cassette for 1000Base-T 1 6 0-1479459-1

190 frontplate panel 1 U for 3 cassettes – – 0-1479451-1


Standard angled panel for 1000Base-T 8 48 0-1777052-1

AMPTRAC angled panel for 1000Base-T 8 48 0-1777053-1

Product Facts:l High-performance TP cabling for guaranteed application performancel High-density, small form factor copper connector interfacel Angled panel with 48 ports on 1 U (protrusion: 140 mm)l Available with AMPTRAC functionalityl Factory terminated and tested solutionl Modular, pluggable solutionl For rear cable management bars see page 119Color: black (RAL 9005)

MRJ21 Snap-In Cassette, Unshielded

AMP Hi-D MRJ21 Angled Patch Panel

MRJ21 Patch Panel, 1 U, Angled


AMP Hi-D MRJ21 panel for 1000Base-T 8 48 1-1671143-1

Product Facts:l High-performance TP cabling for guaranteed application performancel High-density, small form factor copper connector interfacel Angled panel with 48 ports on 1 Ul Factory terminated and tested solutionl Modular, pluggable solutionl For rear cable management bars see page 119Color: black (RAL 9005)

Product Facts:l High-performance copper cabling for guaranteed application performancel High-density, small form factor copper connector interfacel Straight panel with 24 or 48 ports on 1 U l Available with AMPTRAC functionalityl Factory terminated and tested solutionl Modular, pluggable solutionl For rear cable management bars see page 119Color: black (RAL 9005)


Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g


17

Product Facts:

l Factory terminated and tested solutionl Modular, pluggable solutionl Dense CHAMP style double blade design with offset jackscrewl Contact layout and footprint for differential pairs creates reduced crosstalk

and built-in compensionl 1,5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45)l 3 times the port density of an RJ-21l Jackscrew for positive latching and secure cable retention

Color: grey


MRJ21 to MRJ21, 180° back shell Y-1499515-X

Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m2- -5 25,0 m

Y- -X Length

3- -0 30,0 m3- -5 35,0 m4- -0 40,0 m5- -0 50,0 m

Product Facts:

l Factory terminated and tested solutionl Modular, pluggable solutionl Dense CHAMP style double blade design with offset screw fixingl Contact layout and footprint for differential pairs creates reduced

crosstalk and built-in compensationl 1,5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45)l Jackscrews for positive latching and secure cable retention

Color: grey


MRJ21 to RJ-21, 180° back shell Y-1499516-X

Product Facts:

l Factory terminated and tested solutionl Modular, pluggable solutionl Dense CHAMP style double blade design with offset screw fixingl Contact layout and footprint for differential pairs creates reduced

crosstalk and built-in compensationl 3 times the port density of an RJ-21l Jackscrews for positive latching and secure cable retention

Color: grey


MRJ21 to 6 RJ-45 for 1000Base-T, 180° back shell Y-1499520-X

MRJ21 to 12 RJ-45 for 100Base-T, 180° back shell Y-1499521-X

Other lengths on request!

Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m2- -5 25,0 m

Y- -X Length

3- -0 30,0 m3- -5 35,0 m4- -0 40,0 m5- -0 50,0 m


Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m2- -5 25,0 m

Y- -X Length

3- -0 30,0 m3- -5 35,0 m4- -0 40,0 m5- -0 50,0 m


MRJ21 to MRJ21 Cable Assemblies, Unshielded

MRJ21 to RJ-21 Cable Assemblies, Unshielded

MRJ21 Fanout Cable to Multiple RJ-45 Plugs

Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g


CrossConnect (110XC)

Product Facts:

l Cat. 5El Double sided IDC contactsl Terminates AWG 22–26 (solid or stranded) wiresl 3, 4 or 5 Pair blocks with corresponding colour codingl UL listed

No. of Pairs Part Number

4 pairs 0-0558401-1

5 pairs 0-0558402-1

Product Facts:

l Wiring blocks without mounting legsl Cat. 5E l Terminates AWG 22–26 (solid or stranded) wiresl Labeling accessories available (see page 136)l UL listed

No. of Pairs Part Number

50 pairs 0-0558839-1

100 pairs 0-0558840-1

CrossConnect Patch Cords see Page 26

110XC – Connecting Blocks

110XC – Wiring Blocks without Mounting Legs


Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g

CrossConnect (110XC)

19

Product Facts:

l Easy and fast installationl Reduces time for planning and installation of a complete distribution framel Kits include metal back frame, wiring blocks, connecting blocks,

cable management troughs as well as designation strips and appropriate hardware

l UL listed

No. of Pairs Frames No. of Pairs Connecting Blocks Part Number

300 pairs 4 & 5 pairs 0-0569854-1

900 pairs 3 & 4 pairs 0-0569856-1

900 pairs 4 & 5 pairs 0-0569857-1

900 pairs 5 pairs 0-0569858-1

CrossConnect Patch Cords see Page 26

Product Facts:

l Cat. 5E l For installation of 110XC CrossConnect in 190 racksl Cable management panels available as an option (see page 120)l UL listed

No. of Pairs Height Part Number

100 pairs 1 U 0-0558635-1

200 pairs 2 U 0-0558637-1

110XC – 190 Panels

110XC – CrossConnect Distribution Frame Kits

Description Wiring pattern Part Number

Cat. 6 RJ-45 Jacks

Cat. 6 T568A/T568B 0-1375055-X

Cat. 6 with dust cover T568A/T568B 0-1375187-X

Cat. 5E RJ-45 Jacks

Cat. 5E T568A/T568B 0-1375191-X

Cat. 5E with dust cover T568A/T568B 0-1375190-X

Cat. 3 RJ-11 Jacks

Cat. 3 (6-Pos.) RJ11C/RJ14C/RJ25C 0-1375192-X

Cat. 3 (6-Pos.) with dust cover RJ11C/RJ14C/RJ25C 0-1375193-X

Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g


Connectivity

Product Facts:

l SlimLine (SL) Series: Thin profile improves outlet densityl Cat. 6 Pyramid Tested (see page 143)l Jacks available with integral dust coversl 90° or 180° cable dress for easy terminationl Universal wiring label permits wiring to T568A or T568Bl Bend-limiting strain relief includedl UL listed


Cat. 5E Jacks

Cat. 5E T568A/T568B 0-1116604-X

Cat. 5E with dust cover T568A/T568B 0-1339189-X

Cat. 3 Jacks


Cat. 3 (6-Pos.) with dust cover RJ11C/RJ14C/RJ25C 0-1339188-X

Product Facts:

l SlimLine (SL) Series: Thin profile improves outlet densityl Cat. 5E l Terminate with common pliersl Hinged stuffer cap simplifies assemblyl Jacks available with integral dust coversl Universal wiring label permits wiring to T568A or T568Bl UL listed

For Faceplates see Chapter 5 (page 101)

Y- -X Color

0- -1 beige0- -2 black0- -3 white0- -6 blue0- -7 red

Other colors on request!

Y- -X Color



SL Series 110Connect Jacks

SL Series Toolless Jacks


RJ-45 dust cap 0-0969556-X

RJ-45 Dust Cap

Product Facts:

l Re-usable rubber dustcapsl Fits in all RJ 45 Jacksl Available in 7 colors

-X Color

-1 Red-2 Yellow-3 Green-4 Blue-5 Black-6 Grey-7 White


Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g

21

Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g

Connectivity

21

Product Facts:

l Cat. 5E l Universal wiring label permits wiring to

T568A or T568Bl UL listed


Cat. 5E RJ-45 Jacks

Cat. 5E T568A/T568B 0-0406372-X

Cat. 3 RJ-45 and RJ-11 Jacks


Description Cable Exit Part Number

RJ-45 Coupler (8 pos.) straight (180°) 0-0555052-1

RJ-11 Coupler (6 pos.) straight (180°) 0-0555050-1

Product Facts:

l Straight Cat. 3 telephone couplerl SL Series, fits into all faceplatesl Connects either 2 RJ-45 (8 pos.) or 2 RJ-11 (6 pos.) plugs

Color: black


Y- -X Color


Product Facts:

l Category 6 or 5E and IP67 compliant, unshieldedl Traditional 110 tool and toolless versionsl Front-loading into enclosures and outletsl Push-On and Twist Off Mating Actionl Blind mate with Polarized Keyingl Tactile feedback confirms full matingl Optional Outlet Cap with tether availablel Refer to page 26 for EtherSeal patch cords


Cat. 6 SL Series 110Connect Modular Jack Kit 0-1479565-2

Cat. 5E SL Series 110Connect Modular Jack Kit 0-1479563-2

Cat. 5E SL Series Toolless Modular Jack Kit 0-1479561-2

Cat. 5E SL Series In-Line Coupler Kit 0-1479599-2

Jack/Outlet Cap 0-1479591-2

Positiv latching Modular Cap 0-1479861-1


Standard 110Connect Jacks

Modular Telephone-Couplers

EtherSeal Jack and Coupler Kits

Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g


Outlets

Product Facts

l Lockable unshielded Installation Kit IP 44 (1 pair of keys included)l Spray water proofl Dual outlet for industrial and semi industrial environmentsl Pre-loaded with 2 discrete SL 110Connect jacks l Robust and ball-safe wallmount housing (acc. DIN 18032)l Supports 1 Gigabit Ethernetl Each box equipped with a different lockl Locking kits to reduce number of required keys are available

Color: light grey (RAL 7035)


IP 44 box with 2 unshielded SL 110Connect Jacks 0-1711358-1

Set of 6 identical locks with keys 0-1711554-1

Product Facts

l DIN Flushmount kit incl. 1 or 2 Standard 110Connect jacks

l Cat. 5E l With integrated shuttersl With labeling field


Cat. 5E 1port-outlet Y-0966106-5

Cat. 5E 2port-outlet Y-0966105-5

Y- Color

0- almond (RAL 1013)2- pure white (RAL 9010)

IP 44 – Industrial Unshielded Dual Outlet Kit

Cat. 5E DIN Outlet-Kit 110Connect


Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g

AMP Sigma-Link System

23

Y- -X Length

0- -2 2,0 m0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m2- -5 25,0 m3- -0 30,0 m

Y- -X Length

3- -5 35,0 m4- -0 40,0 m5- -0 50,0 m6- -0 60,0 m7- -0 70,0 m8- -0 80,0 m9- -0 90,0 m

Product Facts:

l AMP S-Link is a factory-installed high efficiency solutionl 24 connections per U, 6-port linksl Lengths 2–90 meterl 100% factory testedl Bundle of 6 x 4 pair solid Cat. 6 U/UTP Cable l LSZH Sheath l Cat. 6 RJ-45 Jacksl Integrated Plastic Optical Fiber (POF) in cassette to cassette version


Cassette to cassette with POF Y-1671216-X

Cassette to jack Y-1671217-X

Cassette to open end Y-1671218-X

AMP Sigma-Link Classic Cable Assemblies, Class E

Product Facts:

l 190 1 U unloaded panel to be equipped with AMP S-Link Classic Cassettes

l Including grounding boltl Angled and flush style panels available



AMP Sigma-Link AMP Hi-D Patch Panel 1-1671214-1

AMP Sigma-Link Flush Patch Panel 1-1671215-1

AMP Sigma-Link Classic Patch Panel

Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g



Plug with 2 keys (key number is randomly selected) 0-1871456-1

Plug with 2 keys (default key number “456A”) 0-1871456-2

Plug only (to match with default key “456A”) 0-1871456-3

Default key “456A” 0-1871456-4

Security Key Plug

Product Facts:

l Lock to RJ-45 modular jacksl Can be used for public areas or conference roomsl RoHS compliant

Color: white


Security Key Patch Cord (incl. default key “456A”) 0-1939121-X

Security Key Patch Cord

Product Facts:

l Both ends have security key plug mechanisml Prevent unauthorized disconnectionl Can be used for secure connection (e.g. server lines)l UTP Cat. 5E performancel PVC sheath

Color: white

RJ-45 Security Key Products

-X Length

-1 1,0 m-2 2,0 m-3 3,0 m-4 4,0 m-5 5,0 m


Security Key Jack (incl. default key “456A”) 1-1871456-2

Security Key Jack

Product Facts:

l Lock to RJ-45 modular plugsl Can be used for un-used patch cords

Color: white


Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g

Patch Cords

25

Product Facts:

l Catergory 5E according to ISO/IEC 11801 and EN 50173-1l 4 Pair stranded U/UTP cablel PVC sheath l Snagless boots l Universal wiring

Color Part Number

white Y-0941761-X

Product Facts:

l Catergory 5E according to ISO/IEC 11801 and EN 50173-1l 4 Pair stranded U/UTP cablel LSZH sheathl Color-matched snagless bootsl Universal wiring

Color Part Number

white Y-1644076-X

blue Y-1711035-X

grey Y-1711038-X

red Y-1711028-X

green Y-1711034-X

Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m

Other lengths andcolors on request!

Y- -X Length

0- -9 0,5 m0- -5 1,0 m0- -6 2,0 m0- -7 3,0 m0- -8 5,0 m1- -1 10,0 m


Product Facts:

l Category 6 according to ISO/IEC 11801 and EN 50173-1l 4 Pair stranded U/UTP cablel LSZH sheathl Color-matched snagless bootsl TIA/EIA T568B wiring

Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m

Color Part Number

white Y-1711091-X

blue Y-1711094-X

grey Y-1711093-X

red Y-1711096-X

green Y-1711095-XOther lengths andcolors on request!

Cat. 6 Patch Cord RJ-45 LSZH

Cat. 5E Patch Cord RJ-45 LSZH

Cat. 5E Patch Cord RJ-45 PVC

Uns

hiel

ded

Twis

ted

Pai

rC

ablin

g


Patch Cords

Product Facts:

l Assembly to connect the work area outlet with the consolidation ortransition point (SL 110C Jack to modular plug)

l Meets ISO/IEC 11801 and EN 50173-1l 4 pair solid U/UTP cablel LSZH sheathl Universal wiring

Color: white


Category 6 Y-1711027-X

Category 5E Y-1711040-X

Y- -X Length

0- -5 5,0 m1- -4 7,5 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m

Product Facts:

l Cat. 5E and IP67 compliant, utilizing industrial grade cablel Factory-terminated and tested for qualityl Push-On and Twist-Off Mating Actionll Blind mate with Polarized Keyingl Tactile feedback confirms full matingl Optional Plug Cap with available tether

Color: grey


EtherSeal to EtherSeal Y-1479601-X

EtherSeal to Standard RJ-45 Y-1479602-X

Plug Cap with tether 0-1479592-2

Y- -X Length

0- -3 0,9 m0- -5 1,5 m0- -7 2,1 m1- -0 3,0 m1- -5 4,5 m

Product Facts:

l Patch cord 110XC to RJ-45 Cat. 5El 4 Pair stranded U/UTP cable,

AWG 24 conductors, universal wiringl PVC sheathl UL listed

Color: grey


2 pairs 110XC to RJ-45 T568A/10BASE-T Y-0569685-X

2 pairs 110XC to RJ-45 T568B/10BASE-T Y-0569669-X

4 pairs 110XC to RJ-45 T568A Y-0569527-X

4 pairs 110XC to RJ-45 T568B Y-0569528-X

Y- -X Length

0- -2 0,6 m0- -4 1,2 m0- -6 1,8 m0- -8 2,4 m1- -0 3,0 m

Product Facts:

l Patch cord 110XC to 110XC Cat. 5El 4 Pair stranded U/UTP cable,

AWG 24 conductors, universal wiringl PVC sheathl UL listed

Color: grey

Y- -X Length

0- -2 0,6 m0- -4 1,2 m0- -6 1,8 m0- -8 2,4 m1- -0 3,0 m


1 pair 110XC to 110XC Y-0569523-X

2 pairs 110XC to 110XC Y-0569524-X

4 pairs 110XC to 110XC Y-0569526-X

Cat. 5E 110XC to RJ-45 Patch Cord

Cat. 5E 110XC to 110XC Patch Cord

Consolidation Point Transition Cable Assemblies

EtherSeal Cat. 5E Patch Cord

System Cables 28

Patch Panels 30

Zone Cabling Boxes 32

MRJ21 Connector System 33

Connectivity 34

Outlets 36

AMP Sigma-Link System 37

AMP CO Plus System 38

Patch Cords 49

Transition Cable Assemblies 52

2Shielded Twisted Pair (STP) Cabling Systems

Shielded Twisted Pair (STP) Cabling Systems

l Optimized EMC and transmission quality based on variousshielding technologies (PiMF, S/FTP, F/UTP), maximized bandwith for copper cabling systems

l Complete systems (system cables, MRJ21, patch panels, wall outlets, patch cords)

l Available from Cat. 5E to Cat. 7A:– Cat. 7/7A: maximum future proof, most sophisticated

services like 10 Gigabit Ethernet, 1000Base-TX2, CATV and multi-media

– Cat. 6/6A: high end connecting hardware, Pyramid Tested according to latest de-embedded test standards, supports 10 Gigabit Ethernet

– Cat. 5/5E: proven 100 MHz technology, cost efficient, supports Gigabit Ethernet (1000Base-T)

l Patch panels and wall outlets are either PCB-based or with Keystone Jacks

l MRJ21 STP Connector System:– Shielded high density modular pluggable cabling

system supporting Gigabit Ethernet– Perfect for Data Center environments

l AMP CO Plus System– modular and flexible– sheath sharing– all possible services and interfaces

l AMP S-Link System:– Pre-terminated high efficiency solution– Perfect for Data Center environments

Shi

eld

ed T

wis

ted

Pai

r C

ablin

g


System Cables

Product Facts:

l Qualified against IEC 61156-5 Cat.7 and EN 50288-4-1l Individually foiled pairs plus overall copper braidl AWG 23 solid conductorl Fire retardant LSZH sheath

Color: white

Product Facts:

l High performance S/FTP cablel Qualified against IEC 61156-7 and tested up to 1500MHzl Enables broadband applications like CATV, multi-media etc.l Individually foiled pairs plus overall copper braidl AWG 22 or 23 solid conductorl Fire retardant LSZH sheath

Color: white

AWG Type OD Packaging Part Number

22 Simplex 8,1 mm 1000 m/Reel 0-1499101-1

23 Simplex 7,9 mm 1000 m/Reel 0-1499102-1

22 Duplex 8,1 x 16,5 mm 500 m/Reel 0-1711003-1

23 Duplex 7,9 x 16,0 mm 500 m/Reel 0-1711004-1


23 Simplex 7,3 mm 1000 m/Reel 0-0057893-1

23 Duplex 7,6 x 16,0 mm 500 m/Reel 0-1711005-1

Product Facts:

l Qualified against IEC 61156-5 Cat. 6 and EN 50288-5-1l Individually foiled pairs plus overall foil shield l AWG 23 solid conductorl LSZH sheath

Color: white


23 Simplex 7,3 mm 500 m/Reel 0-1711007-1

23 Duplex 7,6 x 15,5 mm 500 m/Reel 0-1711008-1

Product Facts:

l Qualified against IEC 61156-5 Cat.7 and EN 50288-4-1l Individually foiled pairs plus overall foil shield and drain wirel AWG 23 solid conductorl LSZH sheath

Color: white


23 Simplex 7,4 mm 500 m/Reel 0-1711163-1

23 Duplex 7,2 x 15,0 mm 500 m/Reel 0-1711195-1

Shi

eld

ed T

wis

ted

Pai

r C

ablin

g

28




Cat. 7A S/FTP Cable

Cat. 7 S/FTP Cable

Cat. 7 F/FTP Cable

Cat. 6 F/FTP Cable

Product Facts:

l Qualified against IEC 61156-5 Cat. 5E and EN 50288-2-1l Overall foil shield with drain wirel Very low delay skew, suitable for 1000Base-Tl AWG 24 solid conductor

Color: white


Shi

eld

ed T

wis

ted

Pai

r C

ablin

g

System Cables

29

Shi

eld

ed T

wis

ted

Pai

r C

ablin

g Product Facts:

l Qualified against IEC 61156-5 Cat. 5E and EN 50288-2-1l Overall copper braid plus foil shieldl Very low delay skew, suitable for 1000Base-Tl AWG 24 solid conductor

Color: white


LSZH Simplex 6,5 mm 500 m/Reel 0-0219484-2





-X Packaging

-2 305 m, Pullbox-3 1000 m, Reel

Product Facts:

l Meets or exceeds TIA/EIA and ISO/IEC Category 5E specificationsl Exceeds all requirements for Gigabit Ethernetl Sunlight (UV) resistant for harsh environmentsl Oil resistant, Level IIl Double jacketed – PVC l CMR (Riser) ratedl AWG 24 conductor

Color: grey

Conductors No. of Sheaths OD Packaging Part Number

Solid 1 6,4 mm 305 m/Reel 0-1499449-3

Stranded 2 7,7 mm 305 m/Reel 0-1499450-3

Cat. 5E SF/UTP Cable

Cat. 5E F/UTP Cable

EtherSeal Cat. 5E Cable

29

Product Facts:

l 190, 1 U, RJ-45 patch panel with 24 portsl Cat. 5El LSA+™ tool compatible enhanced 110 IDC blocksl Cover adapts to different cable diameters via

variable snap-in positionl Shield connection separated from strain reliefl VDE grounding boltl T568 A or B wiring patternl Protected PCB


Cat. 5E patch panel 24 Port 0-0336671-X

-X Color

-1 pebble grey (RAL 7032)-2 black (RAL 9005)-3 light grey (RAL 7035)

Cat. 5E – Patch Panel with Rear Cable Management

Shi

eld

ed T

wis

ted

Pai

r C

ablin

g


Patch Panels

Product Facts:

l 190, 1 U, RJ-45 patch panel with 24 portsl AMPTRAC Ready! version:

prepared for AMPTRAC upgrade l Full AMPTRAC version:

fully equipped with AMPTRAC functionality l Cat. 6 Pyramid Tested (see page 143)l Up to 10 GBit/sl LSA+™ tool compatible enhanced 110 IDC blocksl Rear cable managementl Cover adapts to different cable diameters via variable

snap-in positionl Shield connection separated from strain reliefl VDE grounding boltl Universal wiring – T568 A or B wiring patternl Protected PCB


Cat. 6 Full AMPTRAC patch panel black (RAL 9005) 0-1644042-1

Cat. 6 AMPTRAC Ready! patch panel black (RAL 9005) 0-1644042-2

Cat. 6 AMPTRAC Ready! patch panel light grey (RAL 7035) 0-1644042-3

I/O Upgrade Kit from AMPTRAC Ready! to Full AMPTRAC black 0-1711148-1



Cat. 6 – AMPTRAC Ready! Patch Panel

Cat. 6 Compact Patch Panel


190 RJ-45 patch panel black 0-1711544-1

190 RJ-45 patch panel grey 0-1711544-3

Product Facts:

l 190 RJ-45 patch panel with 24 ports on 0,5 Ul Half size compact designl Cat. 6 Pyramid Tested (see page 143)l 10 Gigabit Ethernet readyl Strain relief, VDE grounding bolt and cable managementl Shielded coverl Universal wiring – T568 A or B wiring patternl Protected PCB


Full AMPTRAC* unloaded Panel for AMP-TWIST 7 jacks black 0-1711742-1

Full AMPTRAC* unloaded Panel for AMP-TWIST 6 jacks black 0-1711685-4

AMPTRAC Ready! unloaded panels for all SL jacks black 0-1711685-1

AMPTRAC Ready! unloaded panels for all SL jacks light grey 0-1711685-2

I/O Upgrade Kit to Full AMPTRAC* for AMP-TWIST 7 jacks black 0-1711749-1

I/O Upgrade Kit to Full AMPTRAC* for AMP-TWIST 6 jacks black 0-1711148-1

* AMPTRAC functionality not applicable for jacks with dustcover

Product Facts:

l 190 unloaded flushmount patch panel to be equipped with different SlimLine jacks (see pages 34/35)

l AMPTRAC Ready! version: prepared for AMPTRAC upgrade l Full AMPTRAC version: fully equipped with AMPTRAC functionality l Holds up to 24 SL Jacks

Flushmount AMPTRAC Ready! Patch Panel (unloaded)


Shi

eld

edTw

iste

dP

air

Cab

ling

Patch Panels

31

AMP Hi-D 1 U Modular Patch Panel (unloaded)

Flushmount Modular Patch Panel (unloaded)


Flushmount Modular Panel 1-1671183-1

Flushmount Full AMPTRAC Modular Panel 1-1671187-1

Product Facts:

l 190 1 U unloaded flushmount panel to be equipped with different SlimLine jacks (see pages 34/35)

l Including grounding boltl AMPTRAC functionality not applicable for jacks with dustcover


Product Facts:

l 190 1 U angled modular patch panel to be equipped with different SlimLine jacks (see pages 34/35)

l Adjustable & removable rear cable bracket incl.easy to use cable organizing CaRe-clips

l AMP Hi-DXT includes cable managersl AMPTRAC functionality only applicable for jacks without dustcoverl Including grounding bolt



AMP Hi-D modular panel STP 1-1671157-2

AMP Hi-DXT modular panel STP 1-1671158-2

AMP Hi-D Full AMPTRAC modular panel STP 1-1671136-2

-X Color


Product Facts:

l 190 Standard unloaded flushmount panel to be equipped with different SlimLine jacks (see pages 34/35)

l Including VDE 0100 ground clampl Holds up to 24 modular SL jacks l Ports are iconable (see page 133)


24 port panel 1 U 0-0336526-X

Flushmount Standard Patch Panel (unloaded)

The following connectors can be mounted into the boxes shown above:

Shi

eld

edTw

iste

dP

air

Cab

ling


Zone Cabling Boxes


Distribution Box for AMP-TWIST or SL Jacks 0-1671128-1

Product Facts:

l 1 U distribution box for wallmount or raised floor usel Accepts 12 AMP-TWIST or SL Connectorsl VDE grounding bolt l Includes cable glands and blind covers for cable entriesl Dimensions: 200 x 150 x 40 mm


AMP-TWIST / SL Jack Distribution Box (unloaded)

Description Dimensions (mm) Ports Part Number

SL Jack Consolidation Point 115 x 245 x 40 4 1-1671163-1

SL Jack Consolidation Point 235 x 245 x 40 12 2-1671163-1

Product Facts:

l 1 U consolidation point for wallmount or raised floor usel Accepts 4 or 12 AMP-TWIST or SL Jacksl VDE grounding bolt and strain reliefl Hinged cover with knurled screwl Dust protection for the full connection


AMP-TWIST / SL Jack Consolidation Point (unloaded)

SL Toolless JackSL 110Connect JackAMP-TWIST 7AS SL Jack AMP-TWIST 6S SL Jack


Shi

eld

edTw

iste

dP

air

Cab

ling

33


AMP Hi-D MRJ21 Angled Patch Panel


AMP Hi-D MRJ21 panel for 1000Base-T 8 48 1-1671143-1

Product Facts:

l High-performance TP cabling for guaranteed application performancel High-density, small form factor copper connector interfacel Angled panel with 48 ports on 1 Ul Factory terminated and tested solutionl Modular, pluggable solutionl For rear cable management bars see page 119



Standard straight panel for 1000 Base-T 8 48 0-1777098-1

AMPTRAC straight panel for 1000 Base-T 8 48 0-1777105-1

MRJ21 Patch Panel, 1 U, Straight, Shielded

Product Facts:

l High performance TP Cabling for guaranteed application performancel High-density, small form factor copper connector interfacel Factory terminated and tested solutionl Straight panel with 48 ports on 1 Ul Modular pluggable solutionl Available with AMPTRAC functionalityl For rear cable management bars see page 119



Snap-In Cassette shielded for 1000Base-T 1 6 0-1777086-1

Snap-In Cassette shielded for 100Base-T 1 12 0-1777082-1

190 frontplate panel 1 U for 3 cassettes – – 0-1479451-1

MRJ21 Snap-In Cassette, Shielded

Product Facts:

l High performance TP Cabling for guaranteed application performancel High-density, small form factor connectivityl Factory terminated and tested solutionl Modular, pluggable solutionl Application specific cassettesl Frontplate includes cassette bonding fastener


Product Facts:

l Friendly field installable 1 Gbs solutionl Enhanced screening and improved EMCl Factory terminated and 100 % tested solutionl Dense double blade connector with offset jackscrews for latchingl 1,5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45)l 24 pair shielded cable with AWG 24 solid conductorsl LSZH sheath

Color: white


MRJ21 to MRJ21, 180°–180° back shell Y-1711758-X

MRJ21 to MRJ21, 180°–45° back shell Y-1711774-X

Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m2- -5 25,0 m

Y- -X Length

3- -0 30,0 m3- -5 35,0 m4- -0 40,0 m5- -0 50,0 m


MRJ21 to MRJ21 Cable Assemblies, Shielded

ConnectivityS

hiel

ded

Twis

ted

Pai

rC

ablin

g


Product Facts:

l Universal wiring – T568 A or B wiring patternl Available with 180° or 90° cable exit

Product Facts:

l Termination time less than 1 minute (using Tyco Electronics’ AWC technique)

l Patented shield clamp with integrated strain relief l Available with rear (180°) or side (90°) cable exitl Available with or without dust cover l Available as DIN Rail Kit l Optional colored dust covers available

Product Facts:

l 4 chamber connector, fully compatible to IEC 61076-3-104 Ed. 2, 1000 MHz

l Class FA/Category 7A acc. ISO/IEC 11801l Quick Termination (< 2 minutes)

using Tyco Electronics’ AWC-technologyl Optional colored dust covers available for 0-1711441-1


Cat. 6 die-cast Jack with dust cover, 180° exit 0-1711160-1

Cat. 6 die-cast Jack without dust cover, 180° exit 0-1711342-1

Cat. 6 die-cast Jack with dust cover, 90° exit 0-1711295-1

Cat. 6 die-cast Jack without dust cover, 90° exit 0-1711343-1

DIN Rail Adaptor Kit incl. 1 Jack (with dust cover, 180° exit) and 2 cable ties 0-1711501-1

DIN Rail adapter covers (left and right) 0-1711658-2

Colored dust cover (bag of 50 pieces) 1-1711511-X


Cat. 6 with straight cable exit (180°) 0-1375188-1

Cat. 6 with lateral cable exit (90°) 0-1479552-1

Cat. 5E with straight cable exit (180°) 0-1375189-1

Cat. 5E with lateral cable exit (90°) 0-1479717-1



AMP-TWIST 6S SL Jack

AMP-TWIST 7AS SL Jack

SL Series 110Connect Jacks


Cat. 7A die-cast Jack with dust cover, 180° exit 0-1711441-1

Cat. 7A die-cast Jack without dust cover, 180° exit 0-1711437-1

Colored dust cover (in bag of 50 pieces) 1-1711481-X


-X Color

-6 blue-7 red-8 yellow-9 green


-X Color

-6 blue-7 red-8 green-9 yellow



Shi

eld

edTw

iste

dP

air

Cab

ling

35


Connectivity

Product Facts:

l Category 6 or 5E and IP67 compliant, shielded l Front-loading into enclosures and outletsl Push-On and Twist-Off Mating Action, confirmed by tactile feedbackl Blind mate with Polarized Keyingl Optional Outlet Cap with tether available


Cat. 6 SL Series 110Connect Modular Jack Kit 0-1479566-2

Cat. 5E SL Series 110Connect Modular Jack Kit 0-1479564-2

Cat. 5E SL Series Toolless Modular Jack Kit 0-1479562-2

Cat. 5E SL Series In-Line Coupler Kit 0-1479600-2

Jack/Outlet Cap 0-1479591-2

Product Facts:

l Terminated with common pliers, hinged stuffer cap simplifies assemblyl Universal wiring – T568 A or B wiring patternl For AWG 24 cables only


Cat. 5E 0-1339015-1

SL Series Toolless Jacks

EtherSeal Jack and Coupler Kits


RJ-45 dust cap 0-0969556-X

RJ-45 Dust Cap

Product Facts:

l Re-usable rubber dustcapsl Fits in all RJ 45 Jacksl Available in 7 colors

-X Color

-1 red-2 yellow-3 green-4 blue-5 black-6 grey-7 white

OutletsS

hiel

ded

Twis

ted

Pai

rC

ablin

g


Product Facts:

l Cat. 6 Pyramid Tested (see page 143)l Planar version: flush-mount outlet 100% compatible

with standard and designer frame seriesl Floor version: flat die-cast design for easy floor box mountingl 50 x 50 mm faceplate universal fitl Cable entry angled to avoid bendingl LSA+™ compatible blocksl Universal label for TIA 568 A or TIA 568 B wiringl Protected PCBl For faceplate frame and back box see page 103

Product Facts

l Lockable shielded Installation Kit IP 44 (1 pair of keys included)l Spray water proofl Dual outlet for industrial and semi industrial environmentsl Pre-loaded with either die-cast dual outlet or 2 discrete SL jacks l Robust and ball-safe wallmount housing (acc. DIN 18032)l Supports 10 Gigabit Ethernetl Each box equipped with a different lockl Locking kits to reduce number of required keys are available



IP 44 box with AMP-TWIST 6S Floor die-cast outlet 0-1711357-1

IP 44 box with 2 AMP-TWIST 6S SL Jacks 0-1711474-1


Description Ports Part Number

Planar outlet 2 Y-0336675-1

Planar outlet 1 Y-1711088-1

Floor outlet 2 Y-0336539-1

Y- Color

0- almond (RAL1013)2- pure white (RAL 9010)



Cat. 6 DIN Dual Outlet AMP-TWIST 6S

IP 44 – Industrial Dual Outlet Kit AMP-TWIST 6S

Product Facts:

l 24 connections per 1 U, 6-port linksl Lengths 2–90 meterl AMP S-Link is a factory-installed high efficiency solutionl 100% factory testedl Bundle of 6 x 4 pair solid Cat. 7 S/FTP cablel LSFRZH sheath l AMP-TWIST 6S SL jacksl Integrated Plastic Optical Fiber (POF) in cassette to cassette version

Color: white





Y- -X Length

0- -2 2,0 m0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m2- -5 25,0 m3- -0 30,0 m

Y- -X Length

3- -5 35,0 m4- -0 40,0 m5- -0 50,0 m6- -0 60,0 m7- -0 70,0 m8- -0 80,0 m9- -0 90,0 m

AMP Sigma-Link Classic Cable Assemblies Class EA



Shi

eld

edTw

iste

dP

air

Cab

ling

37

AMP Sigma-Link System

Y- -X Length

0- -2 2,0 m0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m2- -5 25,0 m3- -0 30,0 m

Y- -X Length

3- -5 35,0 m4- -0 40,0 m5- -0 50,0 m6- -0 60,0 m7- -0 70,0 m8- -0 80,0 m9- -0 90,0 m

Product Facts:

l 24 connections per 1 U, 6-port linksl Lengths 2–90 meterl AMP S-Link is a factory-installed high efficiency solutionl 100% factory testedl Bundle of 6 x 4 pair solid Cat. 7A S/FTP cable (compliant to IEC 61156-7)l LSFRZH Sheath l AMP-TWIST 7AS SL jacksl Integrated Plastic Optical Fiber (POF) in cassette to cassette version

Color: white





AMP Sigma-Link Classic Cable Assemblies Class FA

Product Facts:

l 190 1 U unloaded flushmount panel to be equipped with S-Link Classic Cassettes

l Including grounding boltl Angled and flush style panels available



AMP Sigma-Link Classic Hi-D patch panel 1-1671214-1

AMP Sigma-Link Classic Flush patch panel 1-1671215-1

AMP Sigma-Link Classic Patch Panel


Shi

eld

edTw

iste

dP

air

Cab

ling


AMP CO Plus System – Panels

Product Facts:

l 190 patch panel for 8 insertsl Performance up to 2,0 GHzl Straight cable exit plus management barl Kit includes 8 shielded housings, edge connectors,

frames and mounting material incl. VDE grounding bolt

Product Facts:

l 190 patch panel for 16 inserts l Performance up to 2,0 GHzl Straight cable exit plus management barl Kit includes 16 shielded housings,

edge connectors, frames and mounting material incl. VDE grounding bolt

Product Facts:

l 190 patch panel for 32 inserts l Performance up to 2,0 GHzl Straight cable exit plus management barl Kit includes 32 shielded housings,

edge connectors, frames and mounting material incl. VDO grounding bolt

Product Facts:

l 190 patch panel for 24 insertsl Performance up to 2,0 GHzl Straight cable exit plus management barl Kit includes 12 shielded dual housings and frames,

24 edge connectors plus mounting material incl. VDO grounding bolt

For necessary inserts see page 40–45For compatible labeling products etc. see page 133

Type Height Color Part Number

Standard 1 U light grey (RAL 7035) 0-1394576-1

Standard 1 U black (RAL 9005) 0-1394576-3

With label arrays 1,5 U pure white (RAL 9010) 7-0101022-6




With label arrays and management bar 3 U pure white (RAL 9010) 7-0101022-3

With label arrays, without management bar 3 U pure white (RAL 9010) 7-0101022-4




With label arrays 5 U pure white (RAL 9010) 7-0101022-1




Housing protection kit 2 U silver E41188-000

AMP CO Plus 8 Port Patch Panel



AMP CO Plus 24 Port High Density Patch Panel


Shi

eld

edTw

iste

dP

air

Cab

ling

AMP CO Plus System – Boxes/Edge Connector

39

Product Facts:

l 1 U Distribution Box for wallmount or raised floor usel Accepts 8 insertsl Performance up to 2 GHzl Dimensions: 300 x 200 x 50 mm (W x D x H)l Individual strain relief and VDE grounding bolt



AMP CO Plus Distribution Box 0-1711543-1

AMP CO Plus Distribution Box

Description Dimensions (mm) ACO Inserts Part Number

AMP CO Plus MUTO 115 x 245 x 40 2 1-1671163-4

AMP CO Plus MUTO 235 x 245 x 40 4 2-1671163-4

Product Facts:

l 1 U Multi User Telecommunication Outlet for wallmount or raised floor use

l Accepts 2 or 4 AMP CO Plus insertsl Includes AMP CO Plus dual housingl Performance up to 2 GHzl VDE grounding bolt and strain reliefl Hinged cover with knurled screwl Dust protection for the full connection


AMP CO Plus Multi User Telecommunication Outlet (MUTO)


Edge connector Mark II 0-0336455-X

Product Facts:

l Shielded edge connector Mark II for AWG 22–24 twisted pair cablesl 2,0 GHz performancel 110C compatible IDC blockl Universal color codel Fully shielded

-X Quantity

-1 100 pieces-2 8 pieces-3 10 pieces


Edge connector Mark I 0-0556609-X

Product Facts:

l Unshielded edge connector Mark I for ICS Type 1 and Type 1A cablingl 200 MHz performancel Insulation displacement barrel contactsl Universal color code + IBM Type 1 code

-X Quantity

-1 10 pieces-2 16 pieces


AMP CO Plus Edge Connector for Upgrading AMP CO Classic Cablings

AMP CO Classic Edge Connector for Type 1 (150 V) Cablings

Shi

eld

edTw

iste

dP

air

Cab

ling


AMP CO Plus System – Cat. 7 / CATV Inserts

5 6 78

1 2 3 4 5 6 7 8

PR

PR

1 2 34

1 2 3 4 5 6 7 8

PR

PR

Shiel

d

Product Facts:

l Exchangeable system insert for 1 x ISO Cat. 7/7A

(acc. IEC 60603-7-7)l Cat.7A / Class FA, supports 1 GHz bandwidthl Application:

All services incl. 10 Gigabit Ethernet

Pin out: EIA/TIA 568 A; 8 pins, shielded

Product Facts:

l Exchangeable system insert with F-Series connector and 2 RJ-45l Application: 1 x CATV + 1 x Ethernet 100Base-T + 1 x ISDN

Pin out: Balun 75Ω + 12,36 + 45; shielded


Insert Cat. 7/7A ARJ-45 0-1711609-X


Insert F-Series + 2 x RJ-45 0-1711336-X

-X Color

-1 almond (RAL 1013)-3 black (RAL 9005)-5 pure white (RAL 9010)

Product Facts:

l Exchangeable system insert 2 x RJ-45l Cat. 7/ Class F (pairs 12,78 according

ISO/IEC 11801 and EN 50173)l Application: 2 x ATM 622 MBit/s or

Gigabit Ethernet 1000Base-TX2

Pin out: 12,78 + 12,78; 2 x 4 pins, shielded


Insert 2 x RJ-45 Cat. 7 0-0336556-X

-X Color


For accessories and tools see pages 122/123


-X Color


AMP CO Plus Cat. 7A ARJ-45 Style Insert for All Applications (incl. 10 Gb/s)

Product Facts:

l Exchangeable system insert for 1 x ISO Cat. 7/7A

(acc. IEC 61076-3-104)l Cat. 7A / Class FA, supports 1 GHz bandwidth l Application:

All services incl. 10 Gigabit Ethernet

Pin out: EIA/TIA 568A; 8 pins, shielded421 6

1T 1R 2T 2R 3T 3R 4T 4R

PRPR

P1

J1

3 5 8 7PR

PR

Shiel

d


Insert Cat. 7/7A AMP-TWIST 7AS 0-1711409-X

-X Color



AMP CO Plus Cat. 7A AMP-TWIST 7AS Style Insert for All Applications (incl. 10 Gb/s)

AMP CO Plus Cat. 7 Dual RJ-45 Insert, Two Pairs

AMP CO Plus Broadband Insert for “Triple Play”


Shi

eld

edTw

iste

dP

air

Cab

ling

AMP CO Plus System – Cat. 6 Inserts

41

Product Facts:

l Exchangeable system insert 2 x RJ-45l Cat. 6 Pyramid Tested (see page 143) / Class E l Application:

1 x Fast Ethernet 100Base-TX, 1 x ISDN, xDSL or Token Ring

Pin out: 36,45 + 12,36 ; 2 x 4 pins, shielded

Product Facts:


2 x Fast Ethernet 100Base-TX

Pin out: 12,36 + 12,36; 2 x 4 pins, shielded


Insert 2 x RJ-45 Cat. 6 Ethernet 0-0336553-X

Product Facts:

l Exchangeable system insert 1 x RJ-45l Cat. 6 Pyramid Tested (see page 143) / Class E l Application: 1 x all applications incl. Gigabit Ethernet

1000Base-T, 1000Base-TX or 1,2 GBit ATM, 10 GBit Ethernet

Pin out: EIA/TIA 568 A: 8 pins, shielded


Insert 1 x RJ-45 Cat. 6 0-0336548-X

Insert 1 x RJ-45 10 GBE 0-1711188-X

-X Color


365 4

1 2 3 4 5 6 7 8

PRPR

P1

J1

2 1 7 8PR

PR

Shiel

d

321 4

1 2 3 4 5 6 7 8

P1J1

PR

8651 2 3 4 5 6 7 8

J2

PRPRPR

7

Shiel

d

3 2 1 4

1 2 3 4 5 6 7 8

P1

J1PR

865 7

1 2 3 4 5 6 7 8

J2

PR

PR

PR

Shiel

d



-X Color


-X Color


AMP CO Plus Cat. 6 RJ-45 Insert for All Applications (incl. 10 Gigabit/s)

AMP CO Plus Cat. 6 Dual RJ-45 Insert for Fast Ethernet

AMP CO Plus Cat. 6 Dual RJ-45 Insert for Fast Ethernet + Voice/Data


Insert 2 x RJ-45 Cat. 6 mixed 0-0336549-X

Product Facts:


2 x ISDN, xDSL or Token Ring


3 2 1 4

1 2 3 4 5 6 7 8

P1

J1

PR

86 5

1 2 3 4 5 6 7 8

J2

PR

PRPR

7

Shiel

d


Insert 2 x RJ-45 Cat. 6 ISDN 0-0336554-X

-X Color


AMP CO Plus Cat. 6 Dual RJ-45 Insert for Voice/Data

Shi

eld

edTw

iste

dP

air

Cab

ling


AMP CO Plus System – Cat. 5E Inserts


Product Facts:

l Exchangeable system insert 1 x RJ-45l Cat. 5E / Class D l Application:

1 x all applications incl. Gigabit Ethernet 1000Base-T

Pin out: EIA/TIA 568 A; 8 pins, shielded

Product Facts:

l Exchangeable system insert 2 x RJ-45l Cat. 5E / Class D l Application:

2 x Fast Ethernet 100Base-TX



Insert 1 x RJ-45 Cat. 5E 0-0284584-X


Insert 2 x RJ-45 Cat. 5E Ethernet 0-0183636-X

Product Facts:

l Exchangeable system insert 2 x RJ-45l Cat. 5E / Class D l Application: 1 x Fast Ethernet 100Base-TX,

1 x ISDN, xDSL or Token Ring



Insert 2 x RJ-45 Cat. 5E mixed 0-0183641-X

Product Facts:

l Exchangeable system insert 2 x RJ-45l Cat. 5E / Class D l Application: 2 x ISDN, xDSL or Token Ring



Insert 2 x RJ-45 Cat. 5E ISDN 0-0183635-X

321 4

1 2 3 4 5 6 7 8

P1J1

PR

8651 2 3 4 5 6 7 8

J2

PRPRPR

7

Shiel

d

3 2 1 4

1 2 3 4 5 6 7 8

P1

J1

PR

86 5

1 2 3 4 5 6 7 8

J2

PR

PRPR

7

Shiel

d

3 2 1 4

1 2 3 4 5 6 7 8

P1

J1PR

865 7

1 2 3 4 5 6 7 8

J2

PR

PR

PR

Shiel

d

365 4

1 2 3 4 5 6 7 8

PRPR

P1

J1

2 1 7 8PR

PR

Shiel

d

-X Color


-X Color


-X Color


-X Color


AMP CO Plus Cat. 5E RJ-45 Insert for All Applications (incl. Gigabit Ethernet)

AMP CO Plus Cat. 5E Dual RJ-45 Insert for Fast Ethernet

AMP CO Plus Cat. 5E Dual RJ-45 Insert for Fast Ethernet + Voice/Data

AMP CO Plus Cat. 5E Dual RJ-45 Insert for Voice/Data


Shi

eld

edTw

iste

dP

air

Cab

ling

43

Shi

eld

edTw

iste

dP

air

Cab

ling

AMP CO Plus System – PoE Inserts

43

8654 5 1 2 3 6 7 8

7

Shiel

d

Powe

rCo

nver

ter

4214 5 1 2 3 6 7 8

3Po

wer

Conv

erte

r

P1J1

Product Facts:

l Exchangeable system insert 2 x RJ-45l Converts IEEE 802.3af mode B input

to mode A outputl Uses Power Mux/Demux Technologyl Application: 2 x PoE (input mode independent),

e.g. VoIP, over a 4 pair cable (sheath sharing)l For use with Midspan-Units providing power

over unused pairs


Insert 2 x PoE Power Conversion 0-1711125-X

321 4

1 2 3 4 5 6 7 8

P1J1

PR

8651 2 3 4 5 6 7 8

J2

PRPRPR

7

Shiel

d

321 4

4 5 1 2 3 6 7 8

P1J1

8654 5 1 2 3 6 7 8

7

Shiel

d

Powe

rCo

nver

ter

Product Facts:

l Exchangeable system insert 2 x RJ-45l Converts IEEE 802.3af mode B input to

mode A output (on PoE port)l Uses Power Mux/Demux Technology l ISDN or analog telephone (on ISDN Port) l Application: 1 x PoE (input mode independent),

e.g. VoIP + ISDN over a 4 pair cable (sheath sharing)l For use with Midspan-Units providing power

over unused pairs


Insert ISDN + PoE Power Conversion 0-1711130-X

Product Facts:

l Exchangeable system insert 2 x RJ-45l 2 x PoE IEEE 802.3af Mode Al Application: 2 x PoE, e.g. VoIP,

over a 4 pair cable (sheath sharing)l For use in outlet or with phantom power

midspan units

Pin out: 12,36 + 12,36; 2 x 4 pins; shielded


Insert 2 x PoE Mode A 0-1711135-X

-X Color


-X Color


-X Color


AMP CO Plus Dual Patch Panel Insert PoE Power Conversion

AMP CO Plus Dual Patch Panel Insert ISDN/PoE Power Conversion

AMP CO Plus Dual Insert PoE Mode A


3 2 1 4

1 2 3 4 5 6 7 8

P1

J1PR

865 7

1 2 3 4 5 6 7 8

J2

PR

PR

PR

Shiel

d

Product Facts:

l Exchangeable system insert 2 x RJ-45l 1 x ISDN; 1 x PoE IEEE 802.3af Mode Al Application: 1 x PoE, e.g. VoIP, and 1 x ISDN

over a 4 pair cable (sheat sharing)l For use in outlet or with phantom power

midspan units

Pin out: 36,45 + 12,36; 2 x 4 pins; shielded


Insert ISDN + PoE Mode A 0-1711140-X

-X Color


AMP CO Plus Dual Insert ISDN/PoE Mode A

Shi

eld

edTw

iste

dP

air

Cab

ling


AMP CO Plus System – Special Inserts


Product Facts:

l Exchangeable system insert 3 x RJ-45l 1 x Cat. 6 Pyramid Tested (see page 143),

2 x Cat. 3l Application:

2 x telephone (2 wire use),1 x Fast Ethernet 100Base-TX

Pin out: 45 + 45 + 12,36; 2 x 2 pins unshielded; 1 x 4 pins shielded


Insert 3 x RJ-45 (standard phone) 0-1711100-X

Shiel

d

765 8

1 2 3 4 5 6 7 8

J3

PRPR

P1J1

12

1 2 3 4 5 6 7 8

PR

J2

34

1 2 3 4 5 6 7 8

PR


Blank insert 0-0555644-X

Product Facts:

l Blank insertl Dust protection for unused ports

Product Facts:

l Sub-D 9pos insert with 4 connected pairsl Incl. M3 nuts for locking

Color: almond (RAL 1013)


Sub-D insert 0-0183553-1

3 2 14

1 2 3 4 5 6 7 8

P1J1 9

8 5 7 6

Shiel

d

-X Color


Product Facts:

l Exchangeable system insert 3 x RJ-45l 1 x Cat. 6 Pyramid Tested (s. page 143),

2 x Cat. 3l Application:

2 x telephone (parallel use),1 x Fast Ethernet 100Base-TX

Pin out: 36,45 + 36,45 + 12,36; 2 x 2 pins unshielded; 1 x 4 pins shielded


Insert 3 x RJ-45 (shunt phone) 0-1711450-X

123 4 5 6

3 4

PRPR

Shiel

d

765 8

1 2 3 4 5 6 7 8

J3

PRPR

P1TE

LB1 2 7 8

TELA

1 2 7 8

PHON

E

123 4 5 6

3 4

PRPR

-X Color


-X Color

-1 almond (RAL 1013)-3 black (RAL 9005)-5 grey (RAL 7035)-9 pure white (RAL 9010)

AMP CO Plus 3-Port Insert (Standard Phones)

AMP CO Plus 3-Port Insert (Shunt Phones)

AMP CO Plus 4 Pair Sub-D 9pos Insert

AMP CO Plus Blank Insert


Shi

eld

edTw

iste

dP

air

Cab

ling

AMP CO Plus System – Telephone Inserts

45

Part Number 0-1644016-X Part Number 0-1711000-X

12345678

J3

12345678

J4

3214

12345678

P1J1

8

65

12345678

J2

7PR

PR

PRPR

R2100Ω1/2 W

R1100Ω1/2 W

R3100Ω1/2 W

R4100Ω1/2 W

Part Number 0-1711001-X

Phone devices in the work area with differentconnector types (RJ-11 or RJ-45) can be easily integrated into the system. In the patch panel, RJ-45 is preferred.

The table below provides an overview of differ-ent insert types for the various applications inthe work area as ISDN, S0 or UpN and thecorresponding insert on the panel side.

Jack Shielded Terminated Use at Note Part Number

1x RJ-45 no 100 Ω outlet panel side 0-0284584-X 0-0555681-1

2x RJ-45 parallel no no outlet panel side 0-0284584-X 0-1711339-1

2x RJ-45 yes no outlet / panel french version 0-0183578-1

4x RJ-45 no no outlet / panel panel + outlet 0-1711000-X

4x RJ-45 no 100 Ω outlet panel side 0-0555605-X 0-1711001-X

4x RJ-45 no no outlet / panel french version 0-1644016-X

2x RJ-11 no no outlet panel side 0-0555605-X 0-0555614-1


Part Number 0-1711339-1

365

4

12345678

PRPR

P1

J1

21

78

PR

PR

R1100Ω1/2 W

R2100Ω1/2 W


23

123456

P1J1

14

PR

PR

67

123456

J2

58

PR

PR


-X Color


Inserts for Voice Applications

Description

Wiremap

Shi

eld

edTw

iste

dP

air

Cab

ling


AMP CO Plus System – DIN Outlets

Product Facts:

l Shielded installation kitl Bottom cable exitl For underfloor installation boxesl Shielded edge connector Mark II

with PiMF management

l Shielded housing with 360° cable clamp

l Strain reliefl 2,0 GHz performance

For Ackermann Boxes (60 mm mounting)


Faceplate 70 x 58 mm for Ackermann Boxes (60 mm mounting) Almond (RAL 1013) 0-1394763-1

Faceplate 50 x 50 mm for Electraplan (KD E2, E4 and Q4) Almond (RAL 1013) 0-1394583-1 Ackermann is a Trademark of OBO Bettermann

For additional mounting adaptors like wallmount boxes, mounting or underfloor frames see pages 103/104

Product Facts:

l Shielded installation kit l Straight or angled versions l DIN faceplate 68 x 68 mm with 6 x 32 labell Metal framel Shielded edge connector Mark II with PiMF managementl Shielded housing with 360° cable clampl Strain reliefl 2,0 GHz performance

Product Facts:

l Shielded installation kit flushmountl DIN faceplate 50 x 50 mml Metal framel Compatible with standard and

designer frame series

l Shielded edge connector Mark II with PiMF management

l Shielded housing with 360° cable clamp

l Strain reliefl Top, left or right cable entryl 2,0 GHz performance

Color Part Number

Almond (RAL 1013) 0-0336627-1

Pure white (RAL 9010) 2-0336627-1

Black (RAL 9005) 0-0336627-3

Description Cable Entry Part Number

AMP CO Plus installation kit straight without faceplate top, left or right 5-1394580-1

AMP CO Plus installation kit straight top, left or right Y-1394580-1

AMP CO Plus installation kit straight top Y-1394581-1

AMP CO Plus installation kit angled rear Y-1394582-1

Y- Color


AMP CO Plus Installation Kit 50 x 50 mm (Compatible with Frame Series)

AMP CO Plus Installation Kits 68 x 68 mm

AMP CO Plus Installation Kit Underfloor


Shi

eld

edTw

iste

dP

air

Cab

ling

AMP CO Plus System – Swiss Outlets

47

Product Facts:

l Shielded installation kit flushmountl Left, right or top cable exitl Faceplate “Standard” l Shielded edge connector Mark II with

PiMF managementl Shielded housing with 360° cable clampl Strain reliefl 2,0 GHz performance

-X Description

-0 UP: Wall mount, Gr. I, 42 mm-1 AP: Surface mount, Gr. I, 50 mm-3 KNL: Trunk, 60 mm

Product Facts:

l Shielded installation kit flushmountl Applicable to “FLF” systemsl Left, right or top cable exitl Faceplate “FLF”l Shielded edge connector Mark II with


-X Description

-4 FLF: Cable exit 90°-5 FLF-AP: Cable exit 90°-8 FLF: Cable exit 180°-9 FLF-AP: Cable exit 180°

Product Facts:

l Shielded installation kit flushmountl Applicable to “Ediziodue compatible” systemsl Left, right or top cable exitl Faceplate “Ediziodue compatible”l Shielded edge connector Mark II with



AP: Surface mount, Gr. I, 50 mm pure white 9-0101021-1

UP: Wall mount, Gr. I, 42 mm pure white 0-1711187-1

UP: Wall mount, Gr. I, 42 mm black 0-1711187-2

KNL: Tehalit trunk pure white 9-0101021-3

KNL: Tehalit trunk light grey 0-1644097-1

KNL: Tehalit trunk dark grey 0-1644097-2

KNL: Tehalit trunk black 0-1644097-3

Color Part Number

Pure white 7-0101021-X

Color Part Number

Pure white 7-0101021-X

AMP CO Plus Installation Kit CH “Ediziodue Compatible”

AMP CO Plus Installations-Kit CH “Standard”

AMP CO Plus Installations-Kit CH “FLF”

Shi

eld

edTw

iste

dP

air

Cab

ling


AMP CO Plus System – IP 44 /45x45 Outlets

45 x 45 mm Installations Kit

Color Part Number

Almond (RAL 1013) 0-1711488-1

Pure white (RAL 9010) 0-1711488-2

Adaptor Frame to 50 x 50 mm

Color Part Number

Almond (RAL 1013) 0-1379156-1

Product Facts:

l Shielded installation kit flushmount

l Applicable to 45 x 45 systems l Faceplate 45 x 45 mm

l Shielded edge connector Mark II withPiMF management

l Shielded housing with 360° cable clampl Strain reliefl Top, left or right cable entryl 2,0 GHz performance

Product Facts

l Lockable shielded Installation Kit IP 44 (1 pair of keys included)l Spray water proofl Dual outlet for industrial and semi industrial environmentsl Pre-loaded with shielded edge connector Mark II l Robust and ball-safe wallmount housing (acc. DIN 18032)l 2 GHz performancel Each box equipped with a different lockl Locking kits to reduce number of required keys are available



IP 44 box for AMP CO Plus dual inserts 0-1711359-1


IP 44 – Industrial Dual Outlet Kit AMP CO Plus

AMP CO Plus Installation Kit 45 x 45


Shi

eld

edTw

iste

dP

air

Cab

ling

Patch Cords AMP-TWIST 7AS

49

Product Facts:

l Slim line design for High-Density solutionsl Cat. 7A S/FTP stranded cablel LSZH sheathl Black boot on AMP-TWIST 7AS plug

Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m


Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m

Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m


Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m


Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m



AMP-TWIST 7AS to AMP-TWIST 7AS Patch Cord

Color Pairs Performance Part Number

white 4 Cat. 7A Y-1711637-X

Product Facts:

l Slim line design for High-Density solutionsl Cat. 7 S/FTP stranded cablel LSZH sheathl Black boot on AMP-TWIST 7AS plug


AMP-TWIST 7AS to RJ-45 Patch Cord



Product Facts:

l Slim line design for High-Density solutionsl Stranded shielded cablel LSZH sheathl Black boot on AMP-TWIST 7AS plug

AMP-TWIST 7AS (2 Pair) to RJ-45 Patch Cord


white 2 (Ethernet 12/36) Cat. 5E Y-1711613-X

white 2 (ISDN 36/45) Cat. 5E Y-1711618-X

Product Facts:

l Slim line design for High-Density solutionsl RJ-11 to 1 pair plug acc. to IEC 61076-3-104l LSZH sheathl Black boot

AMP-TWIST 7AS Telephone Patch Cord (1 Pair)


black 1 (Voice Application) Cat. 3 Y-1711623-X

Product Facts:

l Slim line design for High-Density solutionsl PAL or male F-Series connector with integrated balun to

1 pair plug acc. to IEC 61076-3-104 l Cat. 7A S/FTP stranded cablel LSZH sheathl Black boot

AMP-TWIST 7AS CATV Patch Cord (1 Pair)


green 1 (Coax with Balun) CATV Y-1711659-X

green 1 (F-conn with Balun) CATV Y-1711624-X


Shi

eld

edTw

iste

dP

air

Cab

ling


Patch Cords

Y- -X Length

0- -5 5,0 m1- -4 7,5 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m

Product Facts:

l Cat. 7 S/FTP stranded cablel LSZH sheathl Color-matched snagless bootsl Universal B-wiring

Color Part Number

white Y-0959385-X

blue Y-1711079-X

grey Y-1711076-X

yellow Y-1711078-X

green Y-1711077-X

Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m


Cat. 6 S/FTP Patch Cord

Product Facts:

l Slim line design for High-Density solutionsl Cat. 7A S/FTP stranded cablel LSZH sheathl Black boot on AMP-TWIST 7AS plug



AMP-TWIST 7AS Single End Patch Cord



Y- -X Length

0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -4 5,0 m1- -0 10,0 m

Product Facts:

l Ideal for installations in combination with AMP CO Plus ARJ-45 Cat. 7A

l Cat. 7A S/FTP stranded cablel ARJ-45 plug acc. to IEC 60603-7-7l LSZH sheath


Cat. 7A ARJ-45 Patch Cord

Description Color Performance Part Number

ARJ-45 to ARJ-45 white Cat. 7A Y-1711563-X

ARJ-45 to RJ-45 white Cat. 6A Y-1711564-X Other lengths on request!



Shi

eld

edTw

iste

dP

air

Cab

ling

Patch Cords

51

Product Facts:

l Category 5E according to ISO/IEC 11801 and EN 50173-1l 4 Pair stranded F/UTP or SF/UTP cablel LSZH sheathl Color-matched snagless bootsl Universal wiring

Color Part Number Part NumberF/UTP SF/UTP

white Y-1644077-X see below

blue Y-0959308-X Y-0959239-X

grey Y-0959305-X Y-0959236-X

yellow Y-0959307-X Y-0959238-X

red Y-0959309-X Y-0959240-X

green Y-0959306-X Y-0959237-X

Product Facts:

l Category 5E according to ISO/IEC 11801 EN 50173-1l 4 Pair stranded SF/UTP cablel LSZH sheathl Snagless bootsl Universal wiring

Color Part Number

white Y-0346925-X

Y- -X Length

0- -9 0,5 m0- -5 1,0 m0- -6 2,0 m0- -7 3,0 m0- -8 5,0 m1- -1 10,0 m


Y- -X Length

1- -1 0,5 m0- -1 1,0 m0- -2 2,0 m0- -3 3,0 m0- -5 5,0 m1- -0 10,0 m


Cat. 5E F/UTP and SF/UTP Patch Cord

Cat. 5E SF/UTP Patch Cord (white)

Product Facts:

l Category 5E and IP67 compliantl SF/UTP shielded (foil and braid) l Utilizes EtherSeal, industrial grade Cat. 5E cablel Factory-terminated and tested for qualityl Push-On and Twist Off Mating Actionl Blind mate with Polarized Keyingl Tactile feedback confirms full matingl Optional Plug Cap with available tether

Color: grey


EtherSeal to EtherSeal Y-1479603-X

EtherSeal to Standard RJ-45 Y-1479604-X

Plug Cap with tether 0-1479592-2

Y- -X Length

0- -3 0,9 m0- -5 1,5 m0- -7 2,1 m1- -0 3,0 m1- -5 4,5 m

EtherSeal Cat. 5E SF/UTP Patch Cord

Shi

eld

edTw

iste

dP

air

Cab

ling


Transition Cable Assemblies

Product Facts:

l Assembly to connect the work area outlet with the consolidation or transition point

l Saves time and money on moves, adds and changesl According to ISO/IEC 11801l Cat. 7 S/FTP solid cable acc. to IEC 61156-5 and EN 50288-4-1l LSFRZH sheathl Universal wiring

Color: white

Description Performance Part Number

AMP-TWIST 6S SL jack to AMP-TWIST 7AS plug Class EA Y-1711666-X

Y- -X Length

0- -5 5,0 m1- -4 7,5 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m3- -0 30,0 m

AMP-TWIST 6S to AMP-TWIST 7AS Consolidation Point Transition Cable Assemblies

Product Facts:


l Saves time and money on moves, adds and changesl According to ISO/IEC 11801 l Cat. 7 S/FTP stranded cable according to

IEC 61156-6 and EN 50288-4-2l LSZH sheathl Universal wiring

Color: white


AMP-TWIST 6S SL jack to RJ-45 plug Class EA Y-1711420-X

AMP-TWIST 6S Consolidation Point Transition Cable Assemblies

Product Facts:


l Saves time and money on moves, adds and changesl Slim line design for High-Density solutionsl According to ISO/IEC 11801l Cat. 7A S/FTP solid cable acc. to IEC 61156-7l LSFRZH sheath

Color: white


Y- -X Length

0- -5 5,0 m1- -4 7,5 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m3- -0 30,0 m


Y- -X Length

0- -5 5,0 m1- -4 7,5 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m3- -0 30,0 m


AMP-TWIST 7AS Consolidation Point Transition Cable Assemblies


AMP-TWIST 7AS SL jack to AMP-TWIST 7AS plug Class FA Y-1711579-X




System Cables 54

Patch Panels 61

Wall Mount Enclosures 65

Quick-Fit and Snap-In Modules 68

MPOptimate Connector System 70

MPO Connector System 73

Connectivity 76

Outlets 87

Cable Assemblies 88

3Fiber Optic (FO)Cabling Systems

Fiber Optic Cabling Systems

Fiber Optic Cables l Available in MM, SM, hybrid and in different fiber typesl LSZH sheath

Patch Panels

l 190 AMP Hi-D and straight versions (empty or loaded) l 190 modular version for Snap-In and Quick-Fit modules

Wallmount Enclosures

l Available for connector modules or splicing technologiesl Available in plastic or metal versions

MPO Connector System

l High density modular pluggable and pre-terminated cabling system supporting 10 Gigabit Ethernet

l Perfect for Data Center environments

MPOptimate Connector System

l Performance optimized MPO Data Center solution l Maximum design flexibility (6 cassettes per channel)l Standard compliant links using less active equipment

Connectors

l Epoxy and quick termination connectors for MM + SMl Coupling adaptors for MM + SM

Outlets

l Available for floorboxes and cable ductsl Optional cable management

Cable Assemblies

l Pigtails and Patchcords for MM + SMl LSZH sheath

Fib

er O

pti

c C

ablin

g


System Cables

Fire performance

Sheathing materials for internal cables comply fully with the following standards:

Aspect Norm

Flammability IEC 60332 Parts 1 and 3Smoke Emission IEC 61034 Parts 1 and 2Acid Gas Emission IEC 6075 Parts 1 and 2Toxicity NES 713

Multimode Fibers

ISO/IEC 11801 and Overfill Bandwidth Max. Link Length for 1 GBit/s Max. Link Length for 10 GBit/s Fiber AttenuationEN 50173 (MHz x km) (m) (m) (dB/km)

850 nm 1300 nm 850 nm 1300 nm 850 nm 1300 nm 850 nm 1300 nm(1000Base-SX) (1000Base-LX) (10GBase-SR) (10GBase-LX4)

(10GBase-SW)

OM1 62,5 µm ≥ 200 ≥ 600 275 550 33* 360* ≤ 2,9 ≤ 0,7

OM1 Plus 62,5 µm ≥ 250 ≥ 800 400 1000 65* 450* ≤ 2,9 ≤ 0,7

OM2 50 µm ≥ 500 ≥ 500 550 550 82* 300* ≤ 2,4 ≤ 0,6

OM2 Plus 50 µm ≥ 600 ≥ 1200 750 2000 100* 1000* ≤ 2,4 ≤ 0,6

OM3 (XG) 50 µm ≥ 1500 ≥ 500 1000 600 300 300 ≤ 2,7 ≤ 0,7

OM4 50 µm ≥ 3500 ≥ 500 1040 600 550 300 ≤ 2,7 ≤ 0,7

* Mode Conditioning Patchcords required

Singlemode Fibers

ISO/IEC 11801 and Chromatic Dispersion Cut-off Wavelength, cabled Point Discontinuity Fiber AttenuationEN 50173 (ps/nm x km) (nm) (dB) (dB/km)

1310 nm 1550 nm 1310 nm 1380–1386 nm 1550 nm

OS2 (ITU-T G.652d) 9 µm ≤ 3,5 ≤ 18,0 ≤ 1260 ≤ 0,1 ≤ 0,34 ≤ 0,31 ≤ 0,22

Geometrical Fiber Properties

Fiber Type Core/Mode-field (µm) Cladding (µm) Coating (µm)

OM1, OM1 Plus 62,5 ± 3 125 ± 2 245 ± 10

OM2, OM2 Plus, OM3 (XG), OM4 50 ± 3 125 ± 2 245 ± 10

OS2 9,2 ± 0,4 125 ± 1 245 ± 5

For all OM3 XG systemcables


Optical Cable Specifications

Maximum Attenuation (dB/km)

Loose Tube Tight Buffered

Multimode 850 nm 1300 nm 850 nm 1300 nm

50/125 3,5 1,5 3,5 1,5

62,5/125 3,5 1,5 3,5 1,5

Singlemode 1310 nm 1550 nm 1310 nm 1550 nm

9/125 0,45 0,4 0,5 0,45

Technical Data


Fib

er O

pti

c C

ablin

g

System Cables

55

Product Facts:

l Low Smoke Zero Halogen (LSZH)l Available buffer designs: Tight-Buffer or Easistripl Fiber categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM4, OS2l Tight buffer versions suitable for AMP NETCONNECT Quick Termination Productsl Easistrip suitable for fusion splice and epoxy techniques

Fiber count Cable type Part Number

2 Zip Twin TB Y-0599142-X

2 Zip Twin ES Y-0599192-X

TB = Tight Buffered ConstructionES = Easistrip (providing 30 cm stripping)

Mechanical Performance

Fiber count Overall-Ø Weight Installation tension max. Crush resistance Minimum bend radius(mm) (kg/km) during installation (N) (N) during installation (mm)

ZipTwin 2,5 x 5,0 14 300 1000 40

Temperature Range

Cable type Transport/Storage Installation Operation

ZipTwin – 10 to + 70 °C – 5 to + 70 °C – 10 to + 70 °C

Packaging

Fiber count Reel type Reel Dimensions

Flange (mm) Traverse (mm)

ZipTwin P6 600 400

LSZH sheath

Aramid strengthmembers

0,9 mm bufferedoptical fiber

-X Fiber category

-2 OM4-3 OM3 (XG)-4 OS2-5 OM1-6 OM2 Plus-7 OM2-9 OM1 Plus

Y- Reel size

1- 1 Kilometer2- 2 Kilometer

Zip Twin Cable

Fiber count Part Number

4 Y-0599144-X

6 Y-0599145-X

8 Y-0599146-X

12 Y-0599148-X

16 Y-0599149-X

24 Y-1716029-X

36 Y-0599602-X

48 Y-0599603-X

-X Fiber category


Y- Reel size


Fib

er O

pti

c C

ablin

g


System Cables


Fiber count Overall-Ø Weight Installation tension max. Crush resistance Minimum bend radius(mm) (kg/km) during installation (N) (N) during installation (mm)

4 5 27 650 2000 75

6 6 33 1000 2000 90

8 6 35 1000 2000 90

12 7,5 56 1000 2000 115

16 8 61 1000 2000 110

24 14,6 206 1500 2000 280

36 17 280 2000 2000 430

48 17,3 240 2000 2000 430

Packaging



4 P6 600 400

6, 8, 12 P8 860 400

16 P10 1000 500

24 P12 1200 500

36, 48 P14 1400 700

Product Facts:

l Universal Low Smoke Zero Halogen (ULSZH)l For indoor and outdoor applicationsl Suitable for backbone and Fiber-to-the-Deskl Increased strength and durabilityl Tight-Buffer constructionl Suitable for all termination techniquesl Fiber categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM4, OS2l Available fiber count: 4–48l Option: water swelling E-glass yarns providing rodent resistance and moisture protection

ULSZH sheath

Aramid strength members

0,9 mm buffered optical fiber

Temperature Range


Office Distribution Cable – 20 to + 70 °C – 5 to + 50 °C – 10 to + 70 °C

Internal/External Office Distribution Cable


Fib

er O

pti

c C

ablin

g

System Cables

57


Fiber count No of Overall-Ø Weight Installation tension max. Crush resistance Minimum bend radiustubes/fillers (mm) (kg/km) during installation (N) (N) during installation (mm)

4, 6, 8, 12 1 6,4 33 500 2000 140

16 1 7,5 44 500 2000 150

24, 48 4 11,5 125 1000 2000 170

72 6 12,7 155 2700 2000 250

96 8 15 210 2700 2000 300

Packaging



4, 6, 8, 12, 16 P10 1000 500

24 P12 1200 500

36 P12 1200 500

48, 72 P12 1200 500

96 P14 1400 700

Product Facts:

l Universal Low Smoke Zero Halogen (ULSZH)l For indoor and outdoor applicationsl Dry tube construction also availablel Loose tube construction l Suitable for all termination techniquesl Fiber categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM4, OS2l Available fiber count: 4–96 (higher fiber count upon request)l Aramid yarns

Dry tube version


4 Y-0599152-X

6 Y-0599153-X

8 Y-0599154-X

12 Y-0599156-X

16 Y-0599157-X

24 Y-0599159-X

48 Y-0599605-X

72 Y-0599606-X

96 Y-0599607-X

Gel filled tube version


4 Y-0599160-X

6 Y-0599161-X

8 Y-0599162-X

12 Y-0599164-X

16 Y-0599165-X

24 (multi-tube) Y-0599167-X

24 (uni-tube) Y-1716000-X

48 Y-0599609-X

72 Y-0599610-X

96 Y-0599611-X

ULSZH sheath

Aramid strengthmembers

Fibers

Loose tube

-X Fiber category


Y- Reel size


Temperature Range


Dry, loose tube – 10 to + 60 °C – 5 to + 50 °C – 10 to + 60 °C

Gel filled, loose tube – 20 to + 60 °C – 5 to + 50 °C – 20 to + 60 °C

Internal/External Loose Tube Cable

Fib

er O

pti

c C

ablin

g


System Cables

Product Facts:

l Universal Low Smoke Zero Halogen (ULSZH)l LDPE sheath upon requestl For indoor and outdoor applicationsl For use in ducts and in direct burial applicationsl Non-metallic rodent resistant with peripheral strength membersl Water swelling E-glass yarn (moisture protection)l Dry tube construction also availablel Loose tube constructionl Suitable for all termination techniquesl Fiber categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM4, OS2l Available fiber count: 4–48 (higher fiber count upon request)



4, 6, 8, 12 1 6,4 48 1250 1000 140

16 1 8 74 1250 1000 160

24, 36, 48 4 11,5 105 2000 2000 230

Packaging



4, 6, 8, 12, 16 P10 1000 500

24 P12 1200 500

36, 48 P12 1200 500

Dry tube version


4 Y-0599614-X

6 Y-0599615-X

8 Y-0599616-X

12 Y-0599617-X

16 Y-0599618-X

24 Y-0599619-X

36 Y-0599620-X

48 Y-0599621-X

Gel filled tube version


4 Y-0599622-X

6 Y-0599623-X

8 Y-0599624-X

12 Y-0599625-X

16 Y-0599626-X

24 (multi-tube) Y-0599627-X

24 (uni-tube) Y-1716001-X

36 Y-0599628-X

48 Y-0599629-X

ULSZH sheath

Water blocking E-glassstrength members

Optical fiber

Ripcord

Loose tube

-X Fiber category


Y- Reel size


Temperature Range


Dry, loose tube – 10 to + 70 °C – 5 to + 50 °C – 10 to + 70 °C

Gel filled, loose tube – 20 to + 70 °C – 5 to + 50 °C – 20 to + 70 °C

Internal/External Rodent Resistant Loose Tube Cable


Fib

er O

pti

c C

ablin

g

System Cables

59

Product Facts:

l Universal Low Smoke Zero Halogen (ULSZH)l LDPE sheath upon requestl For external applications where increased resistance to rodent attack is requiredl For use in ducts and in direct burial applicationsl Non-metallic rodent resistant Glass Reinforced Plastic armouringl Longitudinal and lateral water resistancel High crush resistance and high tensile strengthl Gel filled loose tube constructionl Suitable for all termination techniquesl Fiber categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM4, OS2l Available fiber count: 4–48 (higher fiber count upon request)



4, 6, 8, 12 1 9 94 2000 3000 230

16 1 11 143 3000 3000 280

24, 36, 48 4 15 236 6000 4000 465

Packaging



4, 6, 8, 12, 16 P10 1000 500

24 P14 1400 700

36, 48 P14 1400 700


4 Y-0599168-X

6 Y-0599169-X

8 Y-0599170-X

12 Y-0599172-X

16 Y-0599173-X

24 Y-0599175-X

36 Y-0599612-X

48 Y-0599613-X

-X Fiber category


Y- Reel size


ULSZH sheath

Non-metallicarmouringWater blocking Gel

Central strength memberWrapping tapeLoose tube

Optical fibers

Temperature Range


Single tube – 20 to + 70 °C – 5 to + 50 °C – 20 to + 70 °C

Multi tube – 30 to + 70 °C – 5 to + 50 °C – 30 to + 70 °C

External Rodent Resistant Cable with Non-Metallic Armour

Fib

er O

pti

c C

ablin

g


System Cables

Product Facts:

l HDPE (High Density Polyethylene)l Metallic rodent resistance (corrugated steel)l For use in ducts and in direct burial applicationsl Longitudinal and lateral water resistancel Central gel-filled loose tube constructionl Excellent crush and impact resistancel Suitable for all termination techniquesl Fiber categories: OM1, OM1 Plus, OM2, OM2 Plus, OM3 (XG), OM4, OS2l Available fiber count: 4–24 (higher fiber count upon request)l Option: ULSZH sheath for internal and external applications



4, 6, 8, 12 1 10 67 1250 3000 200

24 1 10,5 93 1250 3000 200

Packaging



4, 6, 8, 12, 24 P12 1200 600


4 Y-0599681-X

6 Y-0599682-X

8 Y-0599692-X

12 Y-0599683-X

24 Y-0599690-X

-X Fiber category


Y- Reel size


High Density Polyethylen(HDPE) Sheath

Corrugated steel tape armouring

Water blocking gel

Optical fibers

Water blocking E-glass

Loose tube

Temperature Range


Single tube – 20 to + 70 °C – 5 to + 50 °C – 20 to + 70 °C

External Rodent Resistant Cable with Corrugated Steel Armour

Description 220 mm deep 300 mm deep

24 x ST-Style, Multimode

Unpopulated 0-1206480-8 0-1206114-8

With 12 adaptors 2-1206480-4 2-1206114-4

With 24 adaptors 4-1206480-4 4-1206114-4

With 24 adaptors and pigtails (OM2) – 4-1206114-0

12 x SC Duplex, Multimode and Singlemode

Unpopulated 0-1206505-8 0-1206138-8

With 6 Multimode adaptors 2-1206505-4 2-1206138-4

With12 Multimode adaptors 4-1206505-4 4-1206138-4

With 12 Multimode adaptors and 24 pigtails (OM3) – 4-1206138-0

With 6 Singlemode adaptors 2-1671017-4 2-1348960-4

With 12 Singlemode adaptors 4-1671017-4 4-1348960-4

With 12 Singlemode adaptors and 24 pigtails (OS2) – 4-1348960-0

Description 300 mm deep

24 x SC Duplex, Multimode and Singlemode

Unpopulated 0-1206343-4

With 24 Multimode adaptors 4-1206343-4

With 24 Multimode adaptors and 48 pigtails (OM3) 4-1206343-1

With 24 Singlemode adaptors 4-1671002-4

With 24 Singlemode adaptors and 48 pigtails (OS2) 4-1671002-1

24 x LC Duplex, Multimode and Singlemode

Unpopulated 0-1671000-8



With 24 Multimode adaptors and 48 pigtails (OM3) 4-1671000-0



With 24 Singlemode adaptors and 48 pigtails (OS2) 4-1671000-1


Fib

er O

pti

c C

ablin

g

Patch Panels

61

Product Facts:

l Drawer style, 1 U, 190

l Pre-installed dust covers on unpopulated portsl Incl. management rings and metric glandsl Available in 300 mm and 220 mm depthl Available in ST-Style, SC and LCl Supplied without splicing tray (for splice trays see page 67)


1 U ST-Style, SC or LC Patch Panel, International Version

AMP Hi-D Modular Fiber Optic Panel

Description Fiber Type Part Number

AMP Hi-D Modular FO panel – 1-1671260-1

Product Facts:


l Plexi transparent coverl 4 Quick-Fit Cutouts (for Quick-Fit modules see page 68)l One pin splice tray fixation (splice tray NOT included, see page 67) l Accessories for splicing, cable attachment and cable management on page 64


Modular Fiber Optic Panel Flushmount Style

Product Facts:


l Interchangeable adaptor panels (to be ordered separately) l For Quick-Fit modules see page 68l Plexi transparent coverl Pull-out labelling stripl Panels available with or without fiber adaptors

(order 0-...-9 for unpopulated version)l One pin Splice Tray fixation (splice tray NOT included, see page 67)l For splicing accessories see page 67, for cable management see page 64


Modular fiber panel – drawer black (RAL 9005) 1-1671262-1

Adaptor panel for 24 x ST-Style black (RAL 9005) Y-1671265-X*

Adaptor panel for 24 x SC duplex black (RAL 9005) Y-1671268-X

Adaptor panel for 24 x LC duplex black (RAL 9005) Y-1671271-X

Adaptor panels for 4 Quick-Fit modules (see page 68) black (RAL 9005) 0-1671263-1

Modular fiber panel – drawer grey (RAL 7035) 1-1671262-2

Adaptor panel for 24 x ST-Style grey (RAL 7035) Y-1671266-X*

Adaptor panel for 24 x SC duplex grey (RAL 7035) Y-1671269-X

Adaptor panel for 24 x LC duplex grey (RAL 7035) Y-1671272-X

Adaptor panels for 4 Quick-Fit modules (see page 68) grey (RAL 7035) 0-1671263-2

* ST-Style not available in OM2 (-2, black) and OM3 (-3, aqua)!

-X Fiber Type Color

-1 OM1 beige-2 OM2 black-3 OM3 aqua-4 OS2 blue-9 unpopulated

Y- No. of Adaptors

0- unpopulated1- 122- 24

Fib

er O

pti

c C

ablin

g


Patch Panels

Product Facts:

l 1 U, 190, metall Pre-installed adaptorsl Pre-installed dustcovers on unpopulated portsl Alignment sleeve material: Multimode = Metal

Singlemode = Ceramicl 2 rear cable entriesl Incl. 1 blindcover and 1 metric pre-installed cable entry plate l Populated fix style versions comes with cable management ringsl Supplied with ANT splicing traysl For panel accessories and splice trays see pages 64/67


Description Fix style without Pigtails Drawer style without Pigtails

24 x ST-Style, Multimode – unpopulated 0-0969614-1 0-0969993-1

24 x ST-Style, Multimode – with 12 adaptors 1-0969616-1 0-0969628-1

24 x ST-Style, Multimode – with 24 adaptors 1-0969618-1 0-0969630-1

12 x ST-Style Duplex/SC Duplex, Multimode – unpopulated 0-0969615-1 0-0969994-1

12 x ST-Style Duplex/SC Duplex, Multimode – with 6 adaptors 1-0969617-2 0-0969629-2

12 x ST-Style Duplex/SC Duplex, Multimode – with 12 adaptors 1-0969619-2 0-0969631-2

12 x SC Duplex/SC Duplex, Singlemode – unpopulated 0-0969615-1 0-0969994-1

12 x SC Duplex/SC Duplex, Singlemode – with 6 adaptors 0-1418730-1 0-1418732-1

12 x SC Duplex/SC Duplex, Singlemode – with 12 adaptors 0-1418731-1 0-1418733-1

12 x SC Duplex/SC Duplex, Multimode – unpopulated 0-0969615-1 0-0969994-1

12 x SC Duplex/SC Duplex, Multimode – with 6 adaptors 1-0969617-1 0-0969629-1

12 x SC Duplex/SC Duplex, Multimode – with 12 adaptors 1-0969619-1 0-0969631-1

24 x LC Duplex/LC Duplex, Multimode – unpopulated 0-1671121-8 0-1671130-8

24 x LC Duplex/LC Duplex, Multimode – with 12 adaptors 2-1671121-8 2-1671130-8

24 x LC Duplex/LC Duplex, Multimode – with 24 adaptors 4-1671121-8 4-1671130-8

24 x LC Duplex/LC Duplex, Singlemode – unpopulated 0-1671121-8 0-1671130-8

24 x LC Duplex/LC Duplex, Singlemode – with 12 adaptors 2-1671121-4 2-1671130-4

24 x LC Duplex/LC Duplex, Singlemode – with 24 adaptors 4-1671121-4 4-1671130-4

24 x SC Duplex/SC Duplex – unpopulated 0-1418734-1 0-1418735-1

1 U ST-Style, SC or LC Patch Panel for German Spoken Countries

Product Facts:

l MT-RJ panel, 1 U, 190

l Holds up to 24 MT-RJ Jacks (see page 77) or up to 24 MT-RJ Pigtails (see page 92)

l Drawer style, slide and tiltl For panel accessories see page 64l Incl. management ringsl Splice tray not included (see page 67)


Description Style MT-RJ quick termination MT-RJ Fusion splice technology Part Number

Workstation Jack** Panel Jack Splicing possible

With 6 cable entries, incl. 2 metric glands universal no yes yes 0-1206704-4

With open backside universal no yes no 0-1536663-2

With 24 shutters universal yes yes* yes* 0-1671003-4

* use of workstation SL-housing necessary (see page 76)** Kit including MT-RJ Jack, SL-Housing and strain relief (see page 76)

1 U MT-RJ Patch Panel, International Version


Fib

erO

pti

cC

ablin

g

Patch Panels

63

Product Facts:

l 1 U, 190, metall Drawer stylel Accommodates up to 3 MPO/MPOptimate Cassettes

(see pages 70/74) or Snap-In-Modules (see pages 68/69)l Quick release front panel


Product Facts:

l 1 U, 190, metall Frontplate stylel Accommodates up to 3 MPO/MPOptimate Cassettes

(see pages 70/74) or Snap-In-Modules (see pages 68/69)l For rear cable management bars (recommended for MPO trunks) see page 119


Description Heigth Part Number

Drawer panel for 3 MPO Cassettes (w/o glands & managers) 1 U 0-1671082-8

Drawer panel for 3 Snap-in-Modules (w/ glands & managers) 1 U 0-1348876-4

Description Heigth Part Number

Frontplate panel for 3 Snap-In Modules 1 U 0-1671114-4

Product Facts:

l 2 U, 190, metall Accommodates up to 4 MPO/MPOptimate Cassettes

(see pages 70/74) or Snap-In-Modules (see page 68/69)l Removable back cover for easy installation l Cable strain relief brackets in back l Front and rear cable management ringsl Edge guard on front cable entriesl Fits standard 190 and 230 racksl Shown loaded with 6-fiber duplex SC adaptor plates (not included)



Panel for 4 Snap-In-Modules 2 U 0-0559542-2

1 U Patch Panel, Drawer, Empty, for 3 MPO Cassettes or Snap-In-Modules

1 U Patch Panel, Frontplate, Empty, for 3 MPO Cassettes or Snap-In-Modules

2 U Patch Panel, Empty, for 4 MPO Cassettes or Snap-In-Modules

AMP Hi-D 4U Modular Panel, Empty, for 12 MPO Cassettes or Snap-In-Modules


AMP Hi-D Modular Panel 4 U 0-1671055-1

Product Facts:

l 4 U, 190, metall Accommodates up to 12 MPO/MPOptimate Cassettes

(see pages 70/74) or Snap-In-Modules (see pages 68/69)l Integrated area for overlength storage


Fib

erO

pti

cC

ablin

g


Patch Panels

Product Facts:

l 4 U, 190, metal, blackl Accepts up to 12 fiber modules (see below)l Integrated drawer for overlength storagel Optional: front cable management rings



Modular fiber distribution unit 0-0336707-1

Cable management rings 0-0336709-1

Fiber Modules

Product Facts:

l Available with the following connector types: ST-Style, SC, MT-RJ, LC, MUl Accomodates the splice trays shown on page 67l Offers fiber, buffer and loose tube managementl For quick termination techniques and fusion splicing l Splice trays and pigtails not included

Fiber modules Part Number

6 x MT-RJ for MT-RJ Workstation Jacks and SL Housings, unpopulated 0-0336720-1

6 x SC Duplex, Multimode 0-0336711-4

6 x SC Duplex, Singlemode 0-0336711-6

6 x SC Duplex Cutout, unpopulated 0-0336711-1

6 x ST-Style Duplex, Multimode 0-0336711-3

6 x ST-Style Duplex, Singlemode 0-0336711-2

6 x ST-Style/SC Duplex, Multimode 0-0336711-5

6 x ST-Style/SC Duplex, Singlemode 0-0336711-7

12 x SC Simplex Cutout, unpopulated 0-0336714-1

12 x MT-RJ adaptor 0-0336714-2

12 x SC Simplex, Singlemode 0-0336714-5

12 x SC Simplex, Singlemode APC 0-0336714-7

6 x LC Duplex, unpopulated (SC-Simplex Cutout) 0-1671044-1

6 x LC Duplex, Singlemode 0-1671044-2

6 x LC Duplex, Multimode 0-1671044-3

blank 0-0336721-1

4 U Modular Fiber Distribution Unit

Description Packaging Part Number

45° cable entry plate for metric glands (german style panels only) 1 0-1418770-1

PG 9 Gland (3,5–8 mm) 50 0-1206144-1

PG 16 Gland (9–14 mm) 50 0-1206145-1

M 20 50 0-1671054-1

M 25 50 0-1671054-2

Cable management ring kit (2 rings) 1 0-1206146-1

Cable termination kit with glands 1 0-1671273-1

Cable termination kit with flex tube 1 0-1671274-1

Dust cover for ST-Style Cut-Out 1 0-0969986-1

Dust cover for LC Duplex/ SC Simplex Cut-Out 1 0-1418800-1

Dust cover for SC Duplex Cut-Out 10 0-1206121-2

Grommets for buffer storage 1 9-0101013-0

Accessories for Patch Panels


Fib

erO

pti

cC

ablin

g

Wall Mount Enclosures

65

Product Facts:

l Integral hasp for use with off-the-shelf padlocksl Designed for intrabuilding or campus backbone applicationsl Recessed, easy-to-use door latchesl Dimensions: 305 x 298,5 x 77,5 mm (W x H x D)


Description Fiber Duplex Port Part NumberDensity Density

With 12 ST-Style Multimode adaptors 12 6 0-1435129-1

With 24 ST-Style Multimode adaptors 24 12 0-1435129-2

With 6 SC Duplex Multimode adaptors 12 6 0-1435130-1

With 12 SC Duplex Multimode adaptors 24 12 0-1435130-2


With grommets, cable glands and splice tray holder 0-1278755-4

Splice tray holder kit 0-1374526-1

Grommets 0-0559496-2

Lock 0-0559501-2

Product Facts:

l Accepts 6 Snap-In-Modules (see pages 68/69)l Optional lock available l Optional grommets availablel Splice tray holder kit available l Designed for intrabuilding or campus backbone applicationsl Reversible cable strain relief bracketl Recessed, easy-to-use door latchesl Dimensions: 420 x 350 x 127,4 mm (W x H x D)


Wall Mount Enclosure for 6 Modules, Unloaded, With Side Door

Wall Mount Enclosure, Loaded

MPO Multi User Telecommunication Outlet (MUTO)

Product Facts:

l 1 U MPO Multi User Telecommunication Outlet for wallmount or raised floor usel Accepts 1 MPO/MPOptimate cassette, see pages 71/74l Including grounding boltl Hinged cover with knurled screwl Dust protection for the full connectionl Dimensions: 140 x 370 x 40 mm (W x L x H)



MPO/MPOptimate Multi User Telecommunication Outlet 1-1671186-1

Fib

erO

pti

cC

ablin

g



Product Facts:

l Pre-installed adaptorl Size: 125 x 150 x 65 mm (W x H x D)l IP 53 rated


Wall Mount Enclosure 2F, SC, Duplex, MM 0-1671116-1

Wall Mount Enclosure 2F, SC, Duplex, SM 0-1671116-2

Product Facts:

l Pre-installed adaptorsl Incl. management ringl Size: 225 x 280 x 85 mm (W x H x D)l IP 53 rated




Product Facts:

l Pre-installed adaptorsl Incl. management ringl Supplied without splicing trayl For accessories and splice trays see pages 64/67l Size: 220 x 325 x 110 mm (W x H x D)l IP 53 rated






Plastic Wall Mount Enclosure 2F

Plastic Wall Mount Enclosure 6F

Plastic Wall Mount Enclosure 12/24F


Fib

erO

pti

cC

ablin

g


67

Product Facts:

l Accept up to 4 hingeable splice traysl Max. 48 splices from 900 to 250 µml Max. 96 splices from 250 to 250 µml Dimensions: 42 x 14 x 35 cm (W x D x H)


FibrBoss Wall Mount Enclosure D24193-000

FibrBoss splice tray for 24 splices with ANT splice protectors 321442-000

FibrBoss splice tray for 24 splices with SMOUV splice protectors 032054-000

Product Facts:

l Building entrance point to connect outside cabling to inhouse cablingl Max. 96 fibersl 16 universal mounting system units (UMS)l Dimensions: 22 x 11 x 32,5 cm (W x D x H)

Description UMS units Part Number

FIST MB2-S wall mount splice enclosure 16 406222-000

FIST SOSA2 splice module for 12 SMOUV splice protectors 2 536788-000

FIST SOSA2 splice module for 12 ANT splice protectors 2 124962-000

FIST SOSA2 single fiber splice module for max. 4 SMOUV splice protectors 1 377602-000

FIST SOSA2 single fiber splice module for max. 4 ANT splice protectors 1 887646-000

Product Facts:

l Environmentally sealed enclosure for fiber management in outside/campus cabling systems

l Aerial, underground or direct buried applicationsl Cold sealing with gell Incl. FOSC-500AA splice tray for max 24 splices


FOSC In-line splice closure for 24 SMOUV splice protectors 909090-000

FOSC In-line splice closure for 24 ANT splice protectors 861528-000

FibrBoss Wall Mount Splice Enclosure, with Hingeable Splice Trays

FIST Wall Mount Splice Enclosure, Building Entrance Point

FOSC In-Line Splice Closure for Outside Cabling

Product Facts:

l Splice trays delivered with coverl Splice protectors not included in tray

Universal Splice Tray FOSC-500 AA*


For 24 SMOUV (62 mm) splice protectors 1 0-1671281-1

For 24 ANT splice protectors 1 0-1671281-2

For 24 RECORDsplice splices 1 0-1671281-3

SMOUV splice protector (62 mm) 100 657054-000

ANT splice protector 150 182398-000

* fits in: – all 1 U patch panels, international style– 4 U modular fiber distribution unit– MT-RJ panels (Part Numbers 0-1206704-4 and 0-1671003-4)

Splice Trays

Quick-Fit Modules


6 x ST 0-1671195-X*

6 x LC duplex 0-1671196-X

6 x MT-RJ 0-1671197-X**

6 x MPO 0-1671200-X***

6 x SC duplex 0-1671201-X

6 x LC quad 0-1671202-X

blank module 0-1479698-1

* ST NOT available in OM3** MT-RJ panel jacks NOT included*** MPO only available in black

Product Facts:

l Universal Snap-In-Modules with Quick-Fit footprintl Fits in all AMP NETCONNECT patch panels with Quick-Fit footprintl Not interchangeable with push pin fixation


-X Fiber Type Color Ferrule

-1 OS2 Blue Ceramic-2 OM2 Black Composite-3 OM3 Aqua Ceramic

Fib

erO

pti

cC

ablin

g


Snap-In Modules

Product Facts:

l Holds up to six MT-RJ Jacks (see page 77) or MT-RJ Jack pigtails (see page 92)

l Fits in AMP NETCONNECT patch panels for Snap-In-Modulesl Individual ports icon-able (see page 133)


Snap-In-Module for 6 MT-RJ Jacks or Jack Pigtails 0-1278328-3

Product Facts:

l Fits in all AMP NETCONNECT patch panels for Snap-In-Modules

12 fibers

6 fibers


ST-Style, 6 fibers (Multimode) 1 0-0559557-1

ST-Style, 6 fibers (Singlemode) 1 0-0559515-2

ST-Style, 12 fibers (Multimode) 1 0-1278567-1

ST-Style, 12 fibers (Singlemode) 1 0-1278567-2

Product Facts:



MPO Coupler 6 x 12 fibers (Multimode + Singlemode) 1 0-1374598-1

MT-RJ Snap-In-Modules

ST-Style Snap-In-Modules

MPO Snap-In-Module

Product Facts:



LC Duplex, 12 fibers (Multimode) 1 0-1374463-2

LC Duplex, 12 fibers (Singlemode) 1 0-1374463-1

Multimode

Singlemode

LC Snap-In-Modules

Product Facts:



Duplex SC to ST-Style, 6 fibers (Multimode) 1 0-0559601-1

Duplex SC to ST-Style, 12 fibers (Multimode) 1 0-1278368-1


Blank modules 1 0-1671146-1

Blank modules 100 1-1671146-1

12 fibers

6 fibers

SC to ST-Style Snap-In-Modules

SL Style Snap-In Module

Snap-In Blank Modules


6 port SL style, black 0-1479506-1

6 port SL style, not painted 0-1671168-1

Product Facts:



Fib

erO

pti

cC

ablin

g

Snap-In Modules

69

12 fibers

6 fibers

Product Facts:



Duplex SC, 6 fibers 1 0-0559558-X

Duplex SC, 12 fibers 1 0-0559596-X

-X Fiber type

-1 Multimode-2 Singlemode

SC Snap-In-Modules

Fib

erO

pti

cC

ablin

g



MPOptimate Pre-terminated Trunks

Product Facts:

l Cable terminated with low loss 12 fiber MPOptimate connectorsl Terminated with female MPO connectors (male versions on request)l OM3 cable performance, LSZH construction l Connector performance: IL # 0,35 dB (max.); RL $ 28 dBl The trunks are equipped with midi fanout that

can be clipped in CaRe-Clipl Available in 12 fiber or 24 fiber

12 fiber: L > 20 m protection tube on both sidesL > 50 m protection tube on both sides; on a reel

24 fiber: L > 20 m protection tube on both sidesL > 40 m protection tube on both sides, on a reel

(For details see customer drawing)

Y- -X Length

0- -7 7 m1- -0 10 m1- -4 14 m2- -0 20 m2- -5 25 m

Y- -X Length

3- -0 30 m3- -5 35 m4- -0 40 m5- -0 50 m5- -2 60 m

Y- -X Length

5- -4 70 m5- -6 80 m5- -8 90 m6- -0 100 m6- -1 110 m

Y- -X Length

6- -2 120 m6- -3 130 m6- -4 140 m6- -5 150 m6- -6 160 m

Y- -X Length

6- -7 170 m6- -8 180 m6- -9 190 m7- -0 200 m7- -1 210 m

Y- -X Length

7- -2 220 m7- -3 230 m7- -5 250 m8- -0 300 m8- -5 350 m

Y- -X Length

9- -0 400 m9- -1 450 m9- -2 500 m

Fiber PairsPart Number

12 Fibers (1 MPO) 24 Fibers (2 MPO)

50/125 µm, OM3 straight Y-1920739-X Y-1920740-X

All pairs straight (Complete link needs one component with flipped pairs!). All non-highlighted PNs have unterminated cable stocked ready for assembly (except OM1).

Midi Fanout to be clippedin CaRe-Clips on rare

cable management bars

Common Features:

In each fiber optic system, the link from source (Tx) to receiver (Rx) needs to be flipped once. In a complete MPO/MPOptimate linkthis flipping is provided by one flippedcassette, while all other components in this link shall be installed as straight version.

MPO/MPOptimate Installation and Polarity


Fib

erO

pti

cC

ablin

g


71

Product Facts:

l Preterminated low loss cassettesFront: 6 optimized SC duplexBack: 1 low loss MPOptimate connector

l Available in straight or flipped pair versionl Optical performance:

IL # 0,35 dB/cassette (max.); RL $ 27dB

l Fits in AMP NETCONNECT Snap-In patch panels (see page 63)

Product Facts:

l Preterminated low loss cassettesFront: 6 or 12 optimized LC duplex Back: 1 or 2 low loss MPOptimate connector(s)

l Available in straight or flipped pair versionl Optical performance:

IL # 0,35 dB/cassette (max); RL $ 27 dB

l Fits in AMP NETCONNECT Snap-In patch panels (see page 63)

Description Fiber type Pairs Part Number

1 x MPO to 6 x LC duplex OM3 straight 0-1920753-1

1 x MPO to 6 x LC duplex OM3 flipped 1-1920753-1

2 x MPO to 12 x LC duplex OM3 straight 0-1920698-1

2 x MPO to 12 x LC duplex OM3 flipped 1-1920698-1

MPOptimate to SC Snap-In-Cassettes

MPOptimate to LC Snap-In-Cassettes

Description Fiber type Pairs Part Number

1 x MPO to 6 x SC duplex OM3 straight 0-2055107-1

1 x MPO to 6 x SC duplex OM3 flipped 1-2055107-1

Fib

erO

pti

cC

ablin

g



MPOptimate Fanout Cords

Product Facts:

l Low loss transition from MPO to LC/SC tails 2 mml Terminated with female MPOptimate connectors l Cable performance: OM3; LSZH constructionl Optical performance:

MPO connector: IL # 0,35 dB (max.); RL $ 28 dBLC connector: IL # 0,15 dB; RL $ 35 dB

l For lengths L # 10 m construction with one fan-outl For lengths L > 10 m construction with two fan-outs

(construction details see customer drawing)


Fan-out cord 1 x MPO to 12x LC X-1920742-Y

Fan-out cord 1 x MPO to 12x SC X-2055110-Y

MPOptimate MPO Patch Cords

Product Facts:

l Low loss MPOptimate MPO ribbon patch cordl Terminated with female MPOptimate connectors l Cable performance: OM3; LSZH constructionl Connector performance: IL # 0,35 dB (max.); RL $ 28 dB


MPO-MPO patch cord 12 fiber X-1920741-Y

Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m

Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m

MPOptimate LC and SC Patch Cords

Product Facts:

l Patch cords with Optimized LC and SC connectorsl Cable performance: OM3; LSZH constructionl Optical performance:

LC connector: IL # 0,15 dB; RL $ 35 dBSC connector: IL # 0,15 dB; RL $ 35 dB


Patch cord LC duplex – LC duplex X-1920743-Y

Patch cord SC duplex – SC duplex X-2055108-Y

Patch cord LC duplex – SC duplex X-2055109-Y

Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m


Fib

erO

pti

cC

ablin

g


73

Y- -X Length

4- -8 25 m0- -3 30 m4- -9 35 m0- -4 40 m

Y- -X Length

4- -6 7 m0- -1 10 m4- -7 15 m0- -2 20 m

Midi Fanout to be clipped in CaRe-Clipson rare cable management bars

Fiber Part Number

62,5/125 µm, OM1 Y-2055163-X

50/125 µm, OM2 Y-2055162-X

50/125 µm, OM3 (XG) Y-2055158-X

9/125 µm, OS2 Y-2055161-X


Product Facts:

l Factory pre-terminated assembliesl Cables terminated with high density MPO connectorsl All cords with protocol, for constant and reliable qualityl In MM and SM designl LSZH sheathl Available in lengths up to 500 m (on request)l The trunks are equipped with midi fanout that

can be clipped in CaRe-ClipFor moreInformation see page 143

Pre-terminated MPO Trunk Cable, 12 Fiber (Midi Fanout)

All cable assembliesdelivered with pulling socks.

FiberPart Number

24 Fibers 48 Fibers

62,5/125 µm, OM1 Y-6391978-X Y-6391981-X

50/125 µm, OM2 Y-6391979-X Y-6391982-X

50/125 µm, OM3 (XG) Y-6920014-X Y-6695471-X

9/125 µm, OS2 Y-6391980-X Y-6391983-X


Y- -X Length

0- -9 90 m1- -0 100 m1- -1 110 m1- -2 120 m

Y- -X Length

1- -7 170 m1- -8 180 m1- -9 190 m2- -0 200 m

Y- -X Length

2- -1 210 m2- -2 220 m2- -3 230 m2- -5 250 m

Y- -X Length

0- -5 50 m0- -6 60 m0- -7 70 m0- -8 80 m

Y- -X Length

1- -3 130 m1- -4 140 m1- -5 150 m1- -6 160 m

Product Facts:

l Factory pre-terminated assembliesl Cables terminated with high density MPO connectorsl High packing density up to 72 fibers on 1 Ul All cords with protocol, for constant and reliable qualityl In MM and SM designl LSZH sheathl Also available in 72 and 96 fiber count l Available in lengths up to 500 m (on request)


Pre-terminated MPO Trunk Cable, 24/48 Fiber

Y- -X Length

0- -7 7 m1- -0 10 m1- -4 14 m2- -0 20 m

Y- -X Length

2- -5 25 m3- -0 30 m3- -5 35 m4- -0 40 m

Y- -X Length

5- -0 50 m5- -2 60 m5- -4 70 m5- -6 80 m

Y- -X Length

5- -8 90 m6- -0 100 m6- -1 110 m6- -2 120 m

Y- -X Length

6- -3 130 m6- -4 140 m6- -5 150 m6- -6 160 m

Y- -X Length

6- -7 170 m6- -8 180 m6- -9 190 m7- -0 200 m

Y- -X Length

7- -1 210 m7- -2 220 m7- -3 230 m7- -5 250 m

Fib

erO

pti

cC

ablin

g



Product Facts:

l Simple and flexible premises fiber cablingl Pre-terminated cassettes with either 1 or 2 MPO

trunk connections (1 x 12 or 2 x 12 fibers) at rearl Either 6 x LC Duplex or 12 x LC Duplex at the frontsidel Easy installation, moves, adds and changesl Fits in all AMP NETCONNECT patch panels for Snap-In-Modules

Fiber type Fiber Part Numbercount

Pairs flipped Pairs straight

62,5 µm, Multimode 12 0-1920209-6 0-1920209-5

50 µm, Multimode 12 0-1920209-4 0-1920209-3

50 µm, OM3, 10 GBit XG, Multimode 12 0-1920209-8 0-1920209-7

9 µm, Singlemode 12 0-1920209-2 0-1920209-1

62,5 µm, Multimode 24 0-1920033-6 0-1920033-5

50 µm, Multimode 24 0-1920033-4 0-1920033-3


9 µm, Singlemode 24 0-1920033-2 0-1920033-1

Product Facts:

l Simple and flexible premises fiber cablingl Pre-terminated cassettes with 2 MPO trunk connections

(2 x 12 fibers) at rearl 12 x MT-RJ at the frontsidel Easy installation, moves, adds and changesl Fits in all AMP NETCONNECT patch panels for Snap-In-Modules

Product Facts:

l Simple and flexible premises fiber cablingl Pre-terminated cassettes with 1 MPO trunk connection

(1 x 12 fibers) at rearl 6 x SC Duplex at the frontsidel Easy installation, moves, adds and changesl Fits in all AMP NETCONNECT patch panels for Snap-In-Modules



62,5 µm, Multimode 24 0-6391920-1 0-6391926-1

50 µm, Multimode 24 0-6391922-1 0-6391928-1


9 µm, Singlemode 24 0-6391924-1 0-6391930-1



62,5 µm, Multimode 12 0-6391932-1 0-6391938-1

50 µm, Multimode 12 0-6391934-1 0-6391940-1


9 µm, Singlemode 12 0-6391936-1 0-6391942-1




MPO to MT-RJ Snap-In-Cassettes

MPO to SC Snap-In-Cassettes

MPO to LC Snap-In-Cassettes


Fib

erO

pti

cC

ablin

g


75

DescriptionPart Number

Female MPO Male MPO

MPO to 6 x MT-RJ, 62,5/125 µm, OM1 Y-6391956-X Y-1920346-X

MPO to 6 x MT-RJ, 50/125 µm, OM2 Y-6391957-X Y-1920347-X

MPO to 6 x MT-RJ, 50/125 µm, OM3 (XG) Y-6695461-X Y-1920348-X

MPO to 6 x MT-RJ, 9/125 µm, OS2 Y-6391958-X Y-1920349-X

MPO to 12 x ST-Style, 62,5/125 µm, OM1 Y-6391961-X –

MPO to 12 x ST-Style, 50/125µm,OM3 (XG) Y-6695459-X –


Female Male

MPO to 12 x LC, 62,5/125 µm, OM1 Y-6695462-X Y-1920350-X

MPO to 12 x LC, 50/125 µm, OM2 Y-6695195-X Y-1920351-X

MPO to 12 x LC, 50/125 µm, OM3 (XG) Y-6695464-X Y-1920352-X

MPO to 12 x LC, 9/125 µm, OS2 Y-6695463-X Y-1920353-X

MPO to 12 x SC, 62,5/125 µm, OM1 Y-6391953-X Y-1920354-X

MPO to 12 x SC, 50/125 µm, OM2 Y-6391954-X Y-1920355-X

MPO to 12 x SC, 50/125 µm, OM3 (XG) Y-6695460-X Y-1920356-X

MPO to 12 x SC, 9/125 µm, OS2 Y-1920112-X Y-1920357-X

Y- -X Length

0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m

Product Facts:

l Available in different lengthsl LSZH sheath (Fanout cord 2 mm jacketed LSZH)l For lengths # 10 m: ribbon cable with 1 fanout (on tail side)l For lengths > 10 m: round cable with 2 fanoutsl Configuration with other connector types on requestl Available with Female and Male MPO connectors

Product Facts:

l MPO coupler always used with on one side MPO male and other side MPO female.


MPO Coupler Receptacle 0-1588172-2

MPO Coupler Snap-In Module (6 ports) 0-1374598-1

MPO Fanout Cords

Accessories


Female/Female Female/Male

62,5/125 µm, OM1 Y-6391905-X Y-2055102-X

50/125 µm, OM2 Y-6391906-X Y-2055103-X

50/125 µm, OM3 (XG) Y-6391908-X Y-1920738-X

9/125 µm, OS2 Y-6391907-X Y-2055104-X

Y- -X Length

0- -1 1,0 m0- -5 5,0 m1- -0 10,0 m1- -5 15,0 m2- -0 20,0 m

Product Facts:

l Available in different lengthl LSZH sheathsl 2 x 5 mm outer dimensionsl Available in Female/Female and

Male/Female version

MPO Patch Cords

Fib

erO

pti

cC

ablin

g


Connectivity

Product Facts:

l SECURE Jacks prevent mispatching and limit access to secure networks

l Available in 10 different color codingsl Each color also features its own mechanical keyl Jacks are to be used with SECURE patch cords (see page 89)l For installation on 900 µm tight buffered fiber

Y- -X Color

0- -1 red0- -2 yellow0- -3 green0- -4 blue0- -5 rose0- -6 aqua0- -7 brown0- -8 violet0- -9 orange1- -0 grey


50/125 µm Y-6278811-X

62,5/125 µm Y-6278810-X

50/125 µm, OM3 (10 GBit XG) Y-6754252-X

Product Facts:

l For installation on 900 µm tight buffered fiberl Re-usable, with bend limiting boot

Common features

l Field installable MT-RJ Jack with 2 pre-terminated fibersl No epoxy, no polish, no crimpl Can be re-terminatedl Jack version eliminates the need for a separate adaptorl With bend limiting boot and SL housing


50/125 µm almond-black 0-6278414-1

62,5/125 µm almond-almond 0-6278415-1

50/125 µm, OM3 (10 GBit XG) grey-grey 1-6278414-2

For termination tool kits see pages 124 ff

For moreInformation

see page 143

MT-RJ Jacks

MT-RJ Workstation Jacks

MT-RJ Secure Workstation Jacks


Fib

erO

pti

cC

ablin

g

Connectivity

77

Product Facts:

l Fits in AMP NETCONNECT MT-RJ patch panell Optional bend limiting boot

Description Fiber/Buffer type Packaging Color Part Number

50/125 µm for 250 µm coated fiber 6 black 0-6278303-1

62,5/125 µm for 250 µm coated fiber 6 almond 0-6278303-2

50/125 µm, OM3 (10 GBit XG) for 250 µm coated fiber 6 grey 0-6278303-4

50/125 µm for 900 µm buffered fiber 6 black 0-6588880-1

62,5/125 µm for 900 µm buffered fiber 6 almond 0-6588880-2

50/125 µm, OM3 (10 GBit XG) for 900 µm buffered fiber 6 grey 0-6588880-3

Bend limiting boot – 100 – 0-6374208-5

Product Facts:

l SECURE Jacks prevent mispatching and limit access to secure networksl Available in 10 different color codingsl Each color also features its own mechanical keyl Jacks are to be used with SECURE patch cords (see page 89)l Fits in AMP NETCONNECT MT-RJ patch panell Optional bend limiting boot

Description Fiber/Buffer type Packaging Part Number

50/125 µm for 250 µm coated fiber 6 Y-6278807-X

62,5/125 µm for 250 µm coated fiber 6 Y-6278808-X

50/125 µm, OM3 (10 GBit XG) for 250 µm coated fiber 6 Y-6693951-X

50/125 µm for 900 µm buffered fiber 6 Y-6588879-X

62,5/125 µm for 900 µm buffered fiber 6 Y-6588878-X

50/125 µm, OM3 (10 GBit XG) for 900 µm buffered fiber 6 Y-6693949-X

For termination tool kits see pages 124 ff

Y- -X Color

0- -1 red0- -2 yellow0- -3 green0- -4 blue0- -5 rose0- -6 aqua0- -7 brown0- -8 violet0- -9 orange1- -0 grey

MT-RJ Panel Jacks

MT-RJ Secure Panel Jacks

Fib

erO

pti

cC

ablin

g


Connectivity

Type Ferrule 3 mm boot 0,9 mm boot Crimp eyelet Fiber type Packaging Part Number

Simplex Ceramic yes no yes MM 10 0-5503948-1

Simplex Ceramic yes no yes SM 10 0-5504646-1

Simplex Ceramic no yes no MM 10 0-5504932-1

Simplex Ceramic no yes no SM 10 0-5492123-1

Duplex Ceramic yes no yes MM 10 0-5504657-1

Duplex Ceramic yes no yes SM 10 0-5504655-1

Product Facts

l High performance pre-radiussed ferrulesl ST-Style compatible bayonet couplingl Multimode or singlemodel Durability: 0,2 dB change after 500 cycles (MM)l Temperature range: –20°C to +75°C l Insertion loss typ. < 0,3 dBl Available in DieCast and overmolded (OVM) versionl For tools see pages 127 ff.

Ferrule Connector body/bayonet 3 mm boot 0,9 mm boot Crimp eyelet Fiber type Packaging Part Number

Ceramic OVM/Metal no no yes MM 1000 0-0503676-1

Ceramic OVM/Metal yes no yes MM 1000 0-0503677-1

Ceramic DieCast/Metal yes no yes SM 1000 0-5502580-2

Ceramic DieCast/Metal no yes yes SM 1000 0-5503613-2

Bend limiting boots, package quantity 100

Cable boot, short, 3 mm, black Part Number 0-0501457-1

Cable boot, short, 3 mm, red Part Number 1-0501457-0

Buffer boot, 0,9 mm, black Part Number 0-5503628-2

Bend limiting boots, package quantity 1000

Cable boot, short, 3 mm, black Part Number 1-5503971-0Cable boot, short, 3 mm, red Part Number 1-5503971-1Cable boot, short, 3 mm, beige Part Number 0-5503971-1Buffer boot, 0,9 mm, black Part Number 0-6457493-3Buffer boot, 0,9 mm, beige Part Number 0-6457493-9

Clips for making one Duplex SCout of two Simplex.(2 Clips needed.)


Product Facts

l High performance pre-radiussed ferrulesl SC compatible JIS C-5973l Multimode or singlemodel Durability: 0,2 dB change after 1000 cycles (MM)l Temperature range: –40°C to +85°C l Insertion loss typ. < 0,2 dBl Available in simplex and duplexl For tools see pages 127 ff.

ST-Style Connector Kits

SC Connector Kits


Fib

erO

pti

cC

ablin

g

Connectivity

79

Clip for making a Duplex LC out of 2 Simplex.

Part Number 0-1754371-2 (black)

Product Facts:

l Multimode and singlemode (Telcordia GR-326 tested and TIA/EIA 568-B.3 qualified)l Universal connector body:

– common body for simplex or duplex– common body for jumper or buffer applications

l Field installable duplex clipl Improved side load strengthl Insertion loss typ. < 0,2 dBl Temperature range –40 °C to +85 °Cl Durability: 0,2 dB change after 500 cycles (MM)

Type Ferrule Boot Fiber type Packaging Part Number

Simplex Ceramic 3,0 mm MM 10 0-1918375-1

Simplex Ceramic 3,0 mm SM 10 0-1918374-1

Simplex Ceramic 1,6–2,0 mm MM 10 0-1918267-1

Simplex Ceramic 1,6–2,0 mm SM 10 0-1918266-1

Simplex Ceramic 0,9 mm MM 10 0-1918385-1

Simplex Ceramic 0,9 mm SM 10 0-1918384-1

Duplex Ceramic 3,0 mm MM 10 0-1918377-1

Duplex Ceramic 3,0 mm SM 10 0-1918376-1

Duplex Ceramic 1,6–2,0 mm MM 10 0-1918373-1

Duplex Ceramic 1,6–2,0 mm SM 10 0-1918372-1

Duplex Ceramic 0,9 mm MM 10 0-1918388-1

This connector type is also available as SECUREproduct, coded with 10 different mechanical keysand colors. To be used with SECURE couplers(see page 82).

LC Connector Kits

Fib

erO

pti

cC

ablin

g


Connectivity

Housing Sleeve Color Mounting Application Packaging Part Number

Plastic Metal almond Clip/Screw MM 10 0-5504663-4

Plastic Ceramic almond Clip/Screw MM 10 0-5503137-6

Plastic Ceramic blue Clip/Screw SM 10 0-5503137-5






Metal Metal – – MM 1 0-0504021-1

Metal Metal – – MM 50 0-0504021-2

Metal Ceramic – – SM 1 0-0502750-1

Metal Polymer – – MM 1 0-0501381-1

Product Facts:

l Suitable for any ST-style connectorl Available in singlemode and multimode versions

Product Facts:

l Suitable for any ST-style and SC connectorl Available in singlemode and multimode versions

Product Facts:

l Suitable for any SC and ST-style simplex connectorl Available in singlemode and multimode versions

Adaptors SC Duplex/ST-Style

Adaptors SC Simplex/ST-Style

Adaptors ST-Style Simplex/ST-Style Simplex 2,5 mm Bayonet


Fib

erO

pti

cC

ablin

g

Connectivity

81





Metal/EMI shielded Ceramic nickel Clip/Screw SM/MM 10 0-6278049-3

Plastic Ceramic aqua Clip/Screw OM3 10 2-5502776-6






Product Facts:

l Suitable for any SC duplex connectorl Available in singlemode and multimode versions

Product Facts:

l Suitable for any SC simplex connectorl Available in singlemode and multimode versions

Simplex


Plastic Ceramic green/with strap Clip/Screw SM 10 4-0106901-4

Plastic Ceramic green/without strap Clip/Screw SM 10 2-0106901-6

Duplex


Plastic Ceramic green Clip/Screw SM 10 2-5502776-3

Product Facts:

l Suitable for any SC-APC connector

Adaptors SC Duplex/SC Duplex

Adaptors SC Simplex/SC Simplex

Adaptors SC-APC/SC-APC

Fib

erO

pti

cC

ablin

g


Connectivity




Plastic Ceramic green Clip/Screw SM 10 0-6457567-6



Simplex


Plastic – almond Clip/Screw MM/SM 1 0-1278017-1

Duplex


Plastic – almond Clip/Screw MM 10 0-6374906-1

Plastic – blue Clip/Screw SM 10 0-6374906-5

Product Facts:

l Suitable for any LC duplex connectorl Fits in any SC-Simplex cut-outl Available for singlemode and multimode

Product Facts:

l Suitable for MT-RJ connectors (1 connector with guide pins, the other without pins)l Duplex coupler fits in SC Duplex cut out, simplex coupler fits in SC Simplex cut outl Available for singlemode and multimode



Plastic Metal beige Clip/Screw MM 10 0-1695790-5

Product Facts:

l Suitable for any LC duplex connectorl Fits in any SC duplex cut-outl Available for singlemode and multimode

This coupler type is also available as SECURE product, coded with 10 different mechanical keysand colors. To be used with SECURE connectors(see pages 79/86) or with SECURE patch cords(see page 91).

Adaptors LC Duplex/LC Duplex

Adaptors LC Quad

Adaptors MT-RJ/MT-RJ


Fib

erO

pti

cC

ablin

g

Connectivity

83

Product Facts:

l Mechanical splicel Re-usable

Mechanical Quick Termination

The CORELINK splice is easy to use, high performance mechanical splice for125 µm singlemode and multimode fibers.Its unique clamping mechanism isactivated with a simple key, no other toolis required. The splice is remateable-either fiber can be removed and replacedin the splice at any time.

Product Facts:

l No fusion splice necessaryl Torsion resistantl Bellcore TR-765 testedl For multimode and singlemodel For tight buffer, semi tight and loose tubel For 250 µm coating and 900 µm bufferl Cleaving tool see page 126

Replacementkeys

Product Facts:

l Elastomer holder for 6 or 12 CORELINK splicesl For mount in splice boxes or in distribution boxes

Product Facts:

l For easy and safe installation of the CORELINK splices


12 CORELINK Splices for multimode 0-0503901-1

12 CORELINK Splices for singlemode 0-0503577-1

2 Replacement keys in key holder 0-0503681-1

Description Dimensions Part Number

Splice holder for 6 CORELINK splices 31,8 x 61,0 mm 0-0559066-1

Splice holder for 12 CORELINK splices 31,8 x 71,1 mm 0-0559087-1


CORELINK Workstation 0-0503605-1

CORELINK Cleave tool 0-1871696-1

Technical Data (Singlemode and Multimode)

Color Insertion loss typical (dB) Return loss typical (dB) Application Temperature range Dimensions

Transparent ≤ 0,3 – 35 dB (min) SM –10 °C to +60 °C 51 x 7,6 x 3,3 mm

Transparent blue ≤ 0,3 – 20 dB (min) MM –10 °C to +60 °C 51 x 7,6 x 3,3 mm

Instruction sheet for CORELINK

CORELINK spliceenglish Part Number 408-4019CORELINK workstation english Part Number 408-4131

AMP CORELINK Mechanical Splice

CORELINK Splices

Splice Holder for CORELINK Splices

Workstation for CORELINK Splices

Fib

erO

pti

cC

ablin

g


Connectivity

Technical Data SM MM

Max. IL (dB) 0,5 0,3

Typ. IL (dB) 0,15 0,1

Min. RL (dB) 60 30

Common features:

l Innovative fiber splicing systeml Focused on indoor and outdoorl Designed to meet outside plant requirement

Product Facts:

l A quality cleaver with a cutting angle of 8° l A capacity of 20000 cleavesl An integrated storage system of fiber cut-offsl Tool-controlled positioning of the cleaved fibers into the splice l Fully mechanical – no power or batteriesl Maintenance-free and no adjustment requirementsl Does not require usage in controlled environmentsl Robust, compact and lightl Can work with very short fiber lengthsl Designed for right-handed and left-handed installersl Tool dimensions: 155 x 160 x 140 mm (L x W x H)l Weight: 1,4 kg/2,2 poundl Comes in a protective case with mounting plate

Product facts:

l Same splice for multimode (OM1, OM2 and OM3)and singlemode fibers

l Any combination of 250 µm and 900 µm fiberl Optical performance comparable with cladding-alignment

based fusion splicesl Molded-in dust capl Designed to meet the international standards even of core

network operating conditions (Telcordia, ITU, ...standards)l Dimension splice: 3,8 x 3,8 x 46,2 mm (L x W x H)l Packaging 1000 pieces (10 group boxes)l Resell packaging (group box) 100 pieces


RPI-SA100 1000 CB8020-000


RPI-TK100 1 CB8019-000

RECORDsplice

Splices

Toolkit


Fib

erO

pti

cC

ablin

g

Connectivity

85

Clips to connect two SC simplex connectors toone SC duplex connector (2 clips needed).


Instruction Sheet for LightCrimp

LightCrimp ST-Style english Part Number 408-9860LightCrimp SC-Style english Part Number 408-4066

Product Facts:

l Cleave, crimp, polish and connectl High performance pre-radiussed ferrulesl Reduced polishing timel Durability: 500 cycles

l Each connector comes in a kit containingaccessories needed to terminate to 900 µmbuffer, 250 µm coating and 3 mm cable

l Compliant with TIA/EIA, IEC, CECC and EN standards

l No epoxy – just polish

Technical Data

Ferrule Insertion loss typic (dB) Temperature range

Ceramic 0,3 –40 °C to +65 °C

Stainless steel 0,3 –25 °C to +65 °C

For Termination tool kits see pages 124 ff

Fiber Ferrule Packaging Part Number

Multimode Ceramic 100 0-5504600-1

Multimode Ceramic 400 0-5503902-1

Multimode Stainless steel 100 0-5504034-1

Singlemode Ceramic 1 0-5504000-1

Fiber Ferrule Packaging Part Number

Simplex MM Ceramic 10 0-5503692-1

Duplex MM Ceramic 10 0-5503693-1

Product Facts:

l ST-Style connectorl Multimode and singlemodel With strain relief and crimp eyelet

Product Facts:

l SC connector (simplex or duplex)l Ceramic ferrulel With strain relief and crimp eyelet

AMP LightCrimp Connector

LightCrimp Connector ST-Style

LightCrimp Connector SC

Fiber Packaging Part Number

Simplex 50/125 µm 10 0-6754483-2

Simplex 62,5/125 µm 10 0-6754483-1

Simplex 10 GBit XG 50/125 µm 10 0-6754483-3

Simplex 9/125 µm 10 0-6754482-1


Simplex 50/125 µm 10 0-6278079-1

Simplex 62,5/125 µm 10 0-5492643-1

Simplex 10 GBit XG 50/125 µm 10 0-6588291-1

Simplex 9/125 µm (250 µm + 900 µm only) 10 0-6693276-1

Product Facts:

l SC connector (simplex)l Ceramic ferrulel With pre-installed and pre-polished fiber

Product Facts:

l LC connector (simplex)l Ceramic ferrulel With pre-installed and pre-polished fiberl For 250 µm + 900 µm cable only

Instruction Sheet LightCrimp Plus

LightCrimp Plus SC Simplex english Part Number 408-4471


LightCrimp Plus LC Simplex english Part Number 408-8925


Simplex 50/125 µm 10 0-6278082-1

Simplex 62,5/125 µm 10 0-5492642-1

Product Facts:

l ST-Style Connectorsl Ceramic ferrulel With pre-installed and pre-polished fiber


LightCrimp Plus ST-Style english Part Number 408-4457

Fib

erO

pti

cC

ablin

g


Connectivity

l No epoxy, curing or UV-light requiredl Available for ST-Style, SC and LC l Complies with the relevant TIA/EIA,

IEC, CECC and EN/IS standardsl No epoxy – pre-polished

Product Facts:

l Easiest and quickest fiber termination (less than one minute)

l Factory polished for consistent high quality and finish (no paper required)

l Durability: 500 cycles

Technical Data

Ferrule Insertion loss typical (dB) Temperature range

Ceramic 0,2 dB (SM), 0,3 dB (MM) –10 °C to +60°C

For Termination tool kits see pages 124 ff

Clips to connect two 2 SC simplex to oneSC duplex connector (2 clips needed).




For more Information see page 143

This connector type is also available as SECURE product, coded with 10 different mechanical keys and colors. To be used with SECURE couplers (see page 82).

Clip for making a LC Duplex out of 2 Simplex.Part Number 0-1754371-2 (black)

AMP LightCrimp Plus Connectors

LightCrimp Plus ST-Style Connectors

LightCrimp Plus SC Connectors

LightCrimp Plus LC Connectors


Fib

erO

pti

cC

ablin

g

Outlets

87

Product Facts:

l Wall outlet for all Fiber-to-the-Desk applicationsl Plastic housingl Available in unpopulated versions and with

pre-loaded adaptorsl Installation accessories see page 104

Product Facts:

l For OBO Bettermann floor boxes GESB and GES9Bl For mounting frames (see page 104)

substituting Ackermann Snap-In floor box

Color: almond (RAL 1013)

Adaptor Type Description Sleeve Color Part Number

DIN Outlet, for SC Duplex or SC/ST-Style Duplex Adaptor N/A see table Y-0966936-2

Unpopulated DIN Outlet, for 2 x MT-RJ Jacks N/A see table Y-0966936-5

“45x45” Outlet 45 x 45 mm, for SC-Duplex, ST-Style or MT-RJ N/A white 0-0183931-1

ST-StyleDIN Outlet, 1 x ST-Style Duplex Metal see table Y-0969732-1

DIN Outlet, 2 x ST-Style Duplex Metal see table Y-0969733-6

ST-Style/SCDIN Outlet, 1 x ST-Style/SC-Duplex Metal see table Y-0969733-3

DIN Outlet, 2 x ST-Style/SC-Duplex Metal see table Y-0969733-4

SCDIN Outlet, 1 x SC-Duplex Metal see table Y-0969733-1

DIN Outlet, 2 x SC-Duplex Metal see table Y-0969733-2

DIN Outlet, 2 x MT-RJ Jacks 50/125 µm incl. cable management N/A almond 1-1534780-2

MT-RJDIN Outlet, 2 x MT-RJ Jacks 50/125 µm incl. cable management N/A white 1-1534780-4

DIN Outlet, 2 x MT-RJ Jacks 62,5/125 µm incl. cable management N/A almond 1-1534780-1

DIN Outlet, 2 x MT-RJ Jacks 62,5/125 µm incl. cable management N/A white 1-1534780-3

Description Sleeve Application Packaging Part Number

1x SC Duplex Adaptor Metal MM 10 0-0969999-1

2x SC Duplex Adaptor Metal MM 10 0-0969999-2

1x SC-ST-Style Duplex Adaptor Metal MM 10 0-0969999-3

2x SC-ST-Style Duplex Adaptor Metal MM 10 0-0969999-4

1x ST-Style Duplex Adaptor Metal MM 10 0-0969999-5

2x ST-Style Duplex Adaptor Metal MM 10 0-0969999-6

2x SC-ST-Style Duplex Adaptor Metal Metal MM 10 0-0969999-7

2x SC-ST-Style Duplex Adaptor Metal Ceramic SM 10 0-0969999-8

2x MT-RJ Jacks unpopulated MM 10 0-0966474-1

Y- Color

0- almond (RAL 1013)2- white (RAL 9010)

Product Facts:

l Cable management with strain relief for the cablel For all DIN style wall outlets (see above)


Cable management 0-1534332-1

Wall Outlets for Dado Trunking

Outlets for OBO Bettermann Floor Boxes

Cable Management for 2 Port Wall Outlets

Ackermann is a Trademark of OBO Bettermann

Fib

erO

pti

cC

ablin

g


Cable Assemblies / Technical Data

SC and ST-Style Assemblies

Cable sheath: LSZH

Cable diameter: 2,5 mm Twin Zip

Buffer: 0,9 mm EasyStrip

Ferrule: Ceramic

MT-RJ Assemblies

Cable sheath: LSZH

Cable diameter: 1,8 mm Mini Twin Zip

Buffer: 0,6 mm

Ferrule: Thermoset

LC Assemblies

Cable sheath: LSZH

Cable diameter: 1,8 mm Mini Twin Zip

Buffer: 0,6 mm

Ferrule: Ceramic

Singlemode Patchcords and Pigtails

Connector type Tuned Insertion loss, typ. Insertion loss, max.* Return loss, min. Temp.-Range

SC, PC Yes 0,15 dB 0,3 dB > 45 dB –25 °C/+70 °C

MPO N/A 0,75 dB 1 dB > 35 dB –10 °C/+60 °C

ST-Style, PC No 0,15 dB 0,3 dB > 45 dB –25 °C/+70 °C

MT-RJ No 0,3 dB 0,75 dB** > 35 dB –10 °C/+60 °C

LC, PC Yes 0,1 dB 0,3 dB > 45 dB –25 °C/+70 °C

* against reference** random mated

Multimode Patchcords

Connector type Insertion loss, max.* Return loss, min. Temp.-Range

SC, PC 0,3 dB > 20 dB –10 °C/+60 °C

ST-Style, PC 0,3 dB > 20 dB –10 °C/+60 °C

MT-RJ 0,5 dB** > 20 dB –10 °C/+60 °C

LC, PC 0,3 dB > 20 dB –10 °C/+60 °C

MPO 0,75 dB (0,5 dB typ.) > 20 dB –10 °C/+60 °C

MPO (OM3) 0,5 dB (0,35 dB typ.) > 20 dB –10 °C/+60 °C

* against reference** random mated

All assemblies are factory tested and come with a test protocol.All assemblies are semi-tight cable constructions except when specially indicated.All assemblies are machine polished providing highest quality with controlled endface specifications.

For all OM3 XG cable assemblies


Technical Data


Fib

erO

pti

cC

ablin

g

Patch Cords

89


Standard 50/125 µm, MM Y-6206617-X

Standard 62,5/125 µm, MM Y-6206613-X

Standard 9/125 µm, SM Y-6206621-X

10 GBit XG 50/125 µm, OM3, MM Y-6536462-X

Product Facts:

l Technical specifications see page 88

This patch cord type is also available as SECUREproduct, coded with 10 different mechanical keysand colors. To be used with SECURE Jacks (see pages 76/77).

Product Facts:


Product Facts:


Product Facts:


Y- -X Length

0- -1 1 m0- -2 2 m0- -5 5 m1- -0 10 m


Standard 50/125 µm Duplex, MM Y-6206619-X

Standard 62,5/125 µm Duplex, MM Y-6206615-X

Standard 9/125 µm Duplex, SM Y-6206623-X

10 GBit XG Duplex, 50/125 µm, OM3, MM Y-6536463-X


Standard 50/125 µm Duplex, MM Y-6206620-X

Standard 62,5/125 µm Duplex, MM Y-6206616-X

Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m

Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m


50/125 µm Duplex, MM Y-6536512-X

62,5/125 µm Duplex, MM Y-6536513-X

9/125µm Duplex, SM Y-6536511-X

10 GBit XG Duplex, 50/125 µm, OM3, MM Y-6536968-X





Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m




MT-RJ/MT-RJ Patch Cords

MT-RJ/ST-Style Duplex Patch Cords

MT-RJ/SC Duplex Patch Cords

MT-RJ/LC Duplex Patch Cords


50/125 µm, MM Y-5349567-X

62,5/125 µm, MM Y-5349580-X

Product Facts:

l Technical specifications see page 88Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m


SC Duplex/ST-Style Duplex Patch Cords

Product Facts:



50/125 µm, MM Y-6536509-X

62,5/125 µm, MM Y-6536510-X

9/125 µm, SM Y-6536508-X

10 GBit XG, 50/125 µm, OM3, MM Y-6536967-X


50/125 µm, MM Y-1568757-X

62,5/125 µm, MM Y-6695121-X

9/125 µm, SM Y-6695657-X

10 GBit XG, 50/125 µm, OM3, MM Y-6695697-X

Fib

erO

pti

cC

ablin

g


Patch Cords


50/125 µm, MM Y-5349565-X

62,5/125 µm, MM Y-5349578-X

9/125 µm, SM Y-6348260-X

10 GBit XG, 50/125 µm, OM3, MM Y-6536464-X

Product Facts:


Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m

Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m


50/125 µm, MM Y-5349561-X

62,5/125 µm, MM Y-5349574-X

9/125 µm, SM Y-6206158-X

Product Facts:


Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m




ST-Style Duplex/ST-Style Duplex Patch Cords

SC Duplex/SC Duplex Patch Cords

SC Duplex/LC Duplex Patch Cords

Product Facts:


Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m


LC Duplex/ST-Style Patch Cords


Fib

erO

pti

cC

ablin

g

Patch Cords

91

Product Facts:



50/125 µm, MM Y-6536502-X

62,5/125 µm, MM Y-6536503-X

9/125 µm, SM Y-6536501-X

10 GBit XG, 50/125 µm, OM3, MM Y-6536969-X

Product Facts:

l For use of Gigabit Ethernet 1000Base-LX on MM fibersl For 50 µm and 62,5 µm fibersl LSZH sheathl Standard length 3 m


SC-Duplex to SC-Duplex, 50/125 µm 0-6206820-3

SC-Duplex to SC-Duplex, 62,5/125 µm 0-6206821-3

SC-Duplex (SM) to ST-Style Duplex, 50/125 µm 0-6348269-3

SC-Duplex (SM) to ST-Style Duplex, 62,5/125 µm 0-6348271-3

MT-RJ (SM) to ST-Style Duplex, 50/125 µm 0-6536445-3

MT-RJ (SM) to ST-Style Duplex, 62,5/125 µm 0-6536444-3

MT-RJ (SM) to SC-Duplex, 50/125 µm 0-6536447-3


MT-RJ (SM) to SC-Duplex, 62,5/125 µm 0-6536446-3

SC-Duplex (SM) to MT-RJ, 50/125 µm 0-6536769-3

SC-Duplex (SM) to MT-RJ, 62,5/125 µm 0-6536770-3

LC-Duplex (SM) to SC-Duplex, 50/125 µm 0-6536810-3

LC-Duplex (SM) to ST-Style Duplex, 62,5/125 µm 0-6695313-3

LC-Duplex (SM) to LC-Duplex, 50/125 µm 0-6536803-3

LC-Duplex (SM) to SC-Duplex, 62,5/125 µm 0-6536811-3

Y- -X Length

0- -1 1 m0- -2 2 m0- -3 3 m0- -5 5 m1- -0 10 m

Product Facts:

l IP67 rated to ensure protection from dust and water immersionl LC connector qualified to Telcordia GR-326 and TIA/EIA 568B.3l Temperature range of –40 °C to 85°Cl Bayonet-style mechanical lockl Flame retardant materials per UL 94 V-0

Applications:

l Harsh environments where chemicals, corrosive gases and liquids are commonplace

l Inside and outside industrial plant and equipment that interface with industrial Ethernet networks

l Remote interface applications such as towers and antennae as well as FTTX in PON and atthe home applications

l Mobile routers and internet hardware


Sealed Circular LC ODVA to LC ODVA cable assy 62,5/125 µm 0-1828935-X

Sealed Circular LC ODVA to LC ODVA cable assy 9/125 µm 0-1828936-X

Plug, Multimode 0-1828618-1

Plug, Singlemode 0-1828618-2

Receptacle, Multimode 0-1828619-1

Receptacle, Singlemode 0-1828619-2

Plug Cap 0-1828740-1

Receptacle Cap 0-1918177-1

-X Length

-1 1 m-2 2 m-3 3 m-4 4 m-5 5 m

This patch cord type is also available asSECURE product, coded with 10 differentmechanical keys and colors. To be used with SECURE couplers (see page 82).


LC Duplex/LC Duplex Patch Cords

Sealed Circular LC ODVA

Mode Conditioning Patch Cords

Description Fiber Strippability Length Part Number

SC 62,5/125 µm, OM1 Semi tight buffer 2 m 0-5349584-4

SC 62,5/125 µm, OM1 Tight buffer 2 m 0-6695506-2

SC 50/125 µm, OM2 Tight buffer 2 m 0-6695505-2

SC 10 GBit XG 50/125 µm, OM3 Semi tight buffer 2 m 0-5349568-4

SC 10 GBit XG 50/125 µm, OM3 Tight buffer 2 m 0-6695507-2

SC/PC tuned 9/125 µm, OS2 Semi tight buffer 2 m 0-5233582-2

SC tuned 9/125 µm, OS2 Tight buffer 2 m 0-6695508-2


LC 62,5/125 µm, OM1 Semi tight buffer 2 m 0-6536974-2

LC 62,5/125 µm, OM1 Tight buffer 2 m 0-6695510-2

LC 50/125 µm, OM2 Semi tight buffer 2 m 0-6536975-2

LC 50/125 µm, OM2 Tight buffer 2 m 0-6695509-2

LC 10 GBit XG 50/125 µm, OM3 Semi tight buffer 2 m 0-6536966-2

LC 10 GBit XG 50/125 µm, OM3 Tight buffer 2 m 0-6695511-2

LC tuned 9/125 µm, OS2 Semi tight buffer 2 m 0-6536880-2

LC tuned 9/125 µm, OS2 Tight buffer 2 m 0-6695512-2

Fib

erO

pti

cC

ablin

g


Pigtails


Product Facts:l Technical specifications see page 88


Product Facts:


Product Facts:l Technical specifications see page 88


Product Facts:

l Fits in all AMP NETCONNECT MT-RJ patch panelsl colored housing optional availablel Technical specifications see page 88


ST-Style 62,5/125 µm, OM1 Semi tight buffer 2 m 0-5349582-4

ST-Style 50/125 µm, OM2 Semi tight buffer 2 m 0-5349569-4

Description Fiber Color Length Part Number

MT-RJ Jack Pigtail 62,5/125 µm, OM1 black 3 m 0-6348941-1

MT-RJ Jack Pigtail 50/125 µm, OM2 black 3 m 0-6348942-1

MT-RJ Jack Pigtail 10 GBit XG, 50/125 µm, OM3 black 3 m 0-6536556-1

MT-RJ Jack Pigtail 9/125 µm, OS2 blue 3 m 0-6391366-1

Single housing – see table – 0-1374416-X

-X Color

-1 almond-2 black-6 blue

MT-RJ Jack Pigtails

ST-Style Pigtails

SC-Pigtails

LC-Pigtails

PoE Equipment 94

Ethernet Media Converters 95

SNMP Managed Media Converters 96

Ethernet Compact Switches 97

Ethernet Smart Switches 98

Ethernet SNMP Managed Switches 99

Accessories 100

4Ethernet LANSolutions

Active Components for Ethernet LANs

l PoE Midspan Units– 8 or 24 port units– All ports fully powered (15,4 W)– Supports 10/100/1000Base-T

l Ethernet Media Converters– 10/100 MBit/s to 100Base-FX– 10/100/1000 MBit/s to 1000Base-FX– Auto-MDI/MDI-X detection– SNMP Managed Converter

l Compact Switches– 5, 8, 16 or 24 port– Compact, user friendly devices– Ideal for SOHO environments

l Smart Switches– 8 or 24 ports– Optional fiber uplinks (MT-RJ, SC, ST-Style)– Simple configuration using console port– Controllable VLANs– Ideal for small to medium workgroups

l SNMP Managed Switches– 8 or 24 ports– Optional fiber uplinks (MT-RJ, SC, ST-Style)– Advanced functionality (SNMP, TELNET and VLANs)– Full network management capabilities

Eth

erne

t LA

N S

olu

tio

ns


PoE Equipment


8 Port PoE Midspan unit, power over unused pairs 0-1591188-X

190 mounting frame 1 U for 3 Midspan units 0-1591185-0

-X Power Cord for

-2 Europe-3 Switzerland-4 Italy-5 Denmark-7 UK, Ireland

-X Power Cord for


Product Facts:

l 8 Port Modular PoE Midspan Unit l Power over unused pairsl 190 rack mountable (with mounting frame)l Universal 110/220 V (50/60 Hz) power supply l Full power on every port (15,4 W)l Up to 3 devices can be mounted into a 190,

1 U mounting framel Supports pre-standard CISCO PoE devices

(PoE Converter needed)


PoE pre-standard converter 0-1711425-1

Product Facts:

l Changes the pin-out to run pre-standard CISCO devicesl Shielded Cat. 5E cable assemblyl To be used with 24 Port Midspan unitl Length 15 cm

Product Facts:

l 24 Port PoE Midspan Unit l 190 rack mountable l Universal 110/220 V (50/60 Hz) power supply l Supports pre-standard CISCO PoE devices

(PoE converter needed)l Managed option available


24 Port PoE Midspan unit, power over unused pairs, standard 0-1591187-X

24 Port PoE Midspan unit, power over unused pairs, SNMP managed 1-1591187-X

24 Port PoE Midspan unit, phantom power, standard 2-1591187-X

24 Port PoE Midspan unit, phantom power, SNMP managed 3-1591187-X

Common Features:

l Supports 10/100/1000 MBit/s Ethernet l Allows the insertion of power into as many as

8 (8 port version) or 24 outlets (24 port version)l IEEE 802.3af compliant

Power over Ethernet (PoE) according to IEEE 802.3afdefines the simultaneous provision of low voltage andEthernet data signals over a cabling system compliant to the ISO/IEC 11801 standard. Now, remote devices likeVoIP phones, W-LAN Access Points, security devicesand much more can be powered remotely.

24 Port PoE Gigabit Midspan Unit

8 Port Modular PoE Gigabit Midspan Unit

PoE Converter for Pre-standard CISCO PoE Devices


Eth

erne

t LA

N S

olu

tio

ns

Ethernet Media Converters

95

Media Converters support all current Ethernet standardsand enable easy extension of 10Base-T, 100Base-TX and 1000Base-T RJ-45 LAN circuits from routers, switches, NICs and other Ethernet devices over optical fibers. This allows greater distances to be covered or, for example, the connection of two workgroups. Support for single fiber WDM also available.

Common Features:

l Easy Plug-and-Play installationl Auto negotiates the required data ratel Auto-MDI/MDI-X detection – eliminates cross-over cablesl Increased network resilience through Link Loss Forwardingl Both SM and MM supportedl Single fiber WDM converters supportedl Rack mountablel External main power supply and rack mount kits are provided

Product Facts:

l 10/100 MBit/s RJ-45 Copper portl Auto-MDI/MDI-X detectionl 100Base-FX fiber portl Dimensions: 85 x 120 x 26 mm (W x D x H)


10/100M Multimode SC Media Converter 0-1591024-X

10/100M Multimode ST-Style Media Converter 0-1591026-X

10/100M Multimode MT-RJ Media Converter 0-1591028-X

10/100M Singlemode – Single Fiber WDM 1550 nm Converter 0-1591029-X

10/100M Singlemode SC Media Converter 0-1591030-X

10/100M Singlemode – Single Fiber WDM 1310 nm Converter 0-1591031-X

Product Facts:

l 10/100/1000 MBit/s RJ-45 Copper portl Auto-MDI/MDI-X detectionl 1000Base-SX or 1000Base-LX fiber portl Dimensions: 85 x 120 x 26 mm (W x D x H)


1000Base-SX (multimode) Media Converter 0-1591020-X

1000Base-LX (singlemode) Media Converter 0-1591022-X

Product Facts:

l Supports up to 10 Media Convertersl Different Media Converter types can be mixedl Hot-Swappable Convertersl A second power supply can be fittedl Exceptionally reliable dual redundant power system

can be Hot-Swappedl Dimensions: 440 x 226 x 133 mm (W x D x H)l Internal cooling fanl Includes kit for mounting in 190 racking


10 Slot Chassis System with 1 Power Unit 0-1591032-X

Spare/Redundant AC Power Unit for Chassis 0-1591034-0

-X Power Cord for


-X Power Cord for


-X Power Cord for


10/100 MBit/s Ethernet Media Converter

Gigabit Ethernet Media Converter

10 Slot 190 Rack Mount Chassis System

Eth

erne

t LA

N S

olu

tio

ns


SNMP Managed Media Converters

Product Facts:

l 10/100/1000 MBit/s RJ-45 Copper portl Auto-MDI/MDI-X detectionl Full configuration via managed chassisl 100Base-FX fiber portl Link loss forwardingl Range of fiber optic portsl Supports TS1000 functionality

Product Facts:

l Supports up to 16 fully managed media convertersl Management card includedl Different media converter types can be mixedl Hot-swappable convertersl A second power supply can be fittedl Exceptionally reliable dual redundant power system

can be hot-swappedl Internal cooling fansl Includes kit for mounting in 190 racking -X Power Cord for



16 Slot SNMP Managed Converter Chassis (AC) 0-1591500-X

Spare/Redundant AC Power Unit 0-1591504-0


1000M Multimode SX SC Media Converter 0-1591510-0

1000M Singlemode LX SC Media Converter 0-1591512-0

10/100M Multimode SC Media Converter 2-1591526-0

10/100M Multimode ST Media Converter 2-1591529-0

10/100M Singlemode SC Media Converter 2-1591525-0

10/100M Singlemode – Single Fiber WDM 1310 nm Converter 2-1591527-0

10/100M Singlemode – Single Fiber WDM 1550 nm Converter 2-1591528-0

This range of fully managed Media Converters support all current Ethernet standards and enable easy extension of 10Base-T, 100Base-TX and1000Base-T RJ-45 LAN circuits from routers, switches, NICs and other Ethernet devices over managed optical fibers. Located in a 19” chassis system they are ideal for telecom and corporate applications where a number of fiber links need to be managed and controlled from a central location.

Common Features:

l Easy Plug-and-Play installationl Auto negotiate the required data ratel Auto-MDI/MDI-X detection – eliminates cross-over cablesl Increased network resilience through Link Loss Forwardingl Both SM and MM fibers supportedl Single fiber WDM converters supportedl Rack mountablel AC and DC PSUs supportedl 16 individual Plug in cards supportedl Management by Console, Web or SNMP

SNMP Managed Ethernet Converter Card

16 Slot 190 Rack Mount SNMP Chassis System


Eth

erne

t LA

N S

olu

tio

ns

Ethernet Compact Switches

97

Product Facts:

l 16 RJ-45 Copper portsl 10/100 MBit/sl Internal AC auto-ranging power supplyl Dimensions: 250 x 133 x 37 mm (W x D x H)l Weight 2,0 kgl Includes kit for mounting in 190 racking


16 Port Compact Ethernet Switch 0-1591070-X

Product Facts:

l 24 RJ-45 Copper portsl 10/100 MBit/sl Internal AC auto-ranging power supplyl Dimensions: 250 x 133 x 37 mm (W x D x H)l Weight 2,0 kgl Includes kit for mounting in 190 racking



Product Facts:

l 8 RJ-45 Copper portsl All 8 ports up-linkable via auto-MDI/MDI-X detectionl 10/100 MBit/sl External power supply providedl Dimensions: 164 x 100 x 26 mm (W x D x H)l Weight 0,5 kg



These un-managed switches are simple plug-and-play units that can be used “straight from the box”.This makes them ideal for local workgroups, smalloffices and SOHO applications. Some switches have either a fixed or optional fiberuplink port to enable high-speed connections tobackbones, servers and NIC cards.

Common Features:

l 10/100 MBit/s RJ-45 copper ports (UTP/STP)l Auto-negotiationl Auto-MDI/MDI-X detection – eliminates cross-over cablesl Easy Plug-and-Play installationl LED’s display switch status

-X Power Cord for


-X Power Cord for


-X Power Cord for


Product Facts:

l 5 RJ-45 Copper portsl All 5 ports up-linkable via auto-MDI/MDI-X detectionl 10/100 MBit/sl External power supply providedl Dimensions: 110 x 70 x 19 mm (W x D x H)l Weight 0,5 kg



-X Power Cord for


5 Port Compact Ethernet Switch




Eth

erne

t LA

N S

olu

tio

ns


Ethernet Smart Switches

Product Facts:

l 24 RJ-45 Copper portsl 10/100 MBit/sl Opt. 100Base-FX Fiber or Dual GBit Uplink

availablel Dimensions: 440 x 230 x 44 mm (W x D x H)l Weight 2,5 kgl Includes kit for mounting in 190 racking

-X Power Cord for



24 Port S/UTP Smart Switch II 0-1591093-X

SC Multimode Fiber Plug-In Option Module 0-1591094-0

ST Multimode Fiber Plug-In Option Module 0-1591095-0

SC Singlemode Fiber Plug-In Option Module 0-1591096-0

Dual SC Gigabit Multimode SX Option Module 0-1591097-0

Dual SC Gigabit Singlemode LX Option Module 0-1591098-0

Dual Gigabit Copper 1000Base-T Option Module 2-1591019-0

Product Facts:

l 8 RJ-45 Copper ports + 1 fiber uplink port (100Base-FX)l Dimensions: 250 x 132 x 37 mm (W x D x H)l Weight 1,0 kgl Fits 100 rackingl Kit for mounting in 190 racking

available on Page 100

-X Power Cord for



8 Port S/UTP Smart Switch with MM SC uplink 0-1591038-X

8 Port S/UTP Smart Switch with MM ST-style uplink 0-1591040-X

8 Port S/UTP Smart Switch with MM MT-RJ uplink 0-1591042-X

8 Port S/UTP Smart Switch with SM SC uplink 0-1591044-X

These high performance Ethernet smart switches are ideal for linking small workgroups or departments to remote servers or routers using the 100 MBit/s uplink port. These are simple to use plug-and-play devices and can be used “straight from the box”. In addition these smart switches can be configured using the local RS232 console port to control functions such as VLAN assignments and port enable/disable modes.

Common Features:

l 10/100 MBit/s RJ-45 copper ports (UTP/STP)l Auto-negotiationl Auto-MDI/MDI-X detection – eliminates cross-over cables l LED’s display switch statusl Manageable via RS232 console portl Management allows Ports and VLANs to be controlled and

duplex modes setl Internal AC auto-ranging power supply

8 Port 10/100 MBit/s Smart Switch With Integrated Fiber Uplink

24 Port 10/100 MBit/s Smart Switch II With Optional Dual Fiber Uplink


Eth

erne

t LA

N S

olu

tio

ns

Ethernet SNMP Managed Switches

99

-X Power Cord for


Product Facts:

l 8 RJ-45 Copper ports + 1 fiber uplink port (100Base-FX)l Dimensions: 250 x 132 x 37 mm (W x D x H)l Weight 1,0 kgl Fits 100 rackingl Kit for mounting in 190 racking

available on Page 100


8 Port S/UTP SNMP Smart Switch with MM SC uplink 0-1591074-X

8 Port S/UTP SNMP Smart Switch with MM ST-style uplink 0-1591076-X

8 Port S/UTP SNMP Smart Switch with MM MT-RJ uplink 0-1591078-X

8 Port S/UTP SNMP Smart Switch with SM SC uplink 0-1591080-X

These easy to install, high performance switchessupport SNMP, VLANs and Quality-of-Service. This capability is ideal for network managers who want to have full control of their network and plan toimplement these switches in distributed workgroups.

Common Features:

l 10/100 MBit/s RJ-45 copper ports (UTP/STP)l Auto-negotiationl Auto-MDI/MDI-X detection – eliminates cross-over cables

(not on 16 port version)l Easy Plug-and-Play installationl LED’s display switch statusl Manageable via RS232 console port and web browserl Management allows Ports and VLANs to be controlled and

duplex modes setl Spanning Tree Protocol supportl Internal AC auto-ranging power supply

-X Power Cord for


Product Facts:

l 24 RJ-45 copper ports (UTP/STP)l 10/100 MBit/sl Support IP Management Stackingl Can support 8 Units per IP Stackl Support for Single Optional 100 Mbit/s Fiber Uplinkl Support for Dual Gigabit Optional fiber or UTP/STPl Dimensions 440 x 161 x 44 mm (W x D x H)l Weight 2,0 kgl Includes Kit for mounting in 190 racking


24 Port Stackable Managed Switch 0-1591099-X

100Base-FX SC Multimode Fiber Plug-In Option Module 0-1591094-0

100Base-FX ST Multimode Fiber Plug-In Option Module 0-1591095-0

100Base-FX SC Singlemode Fiber Plug-In Option Module 0-1591096-0

Dual Gigabit Multimode SX Plug-In Option Module 0-1591097-0

Dual Gigabit Singlemode LX Plug-In Option Module 0-1591098-0

Dual Gigabit Copper 1000Base-T Plug-In Option Module 2-1591019-0

8 Port 10/100 MBit/s SNMP Smart Switch With Integrated Fiber Uplink

24 Port 10/100 MBit/s Stackable SNMP Switch With Optional Dual Uplink

Eth

erne

t LA

N S

olu

tio

ns


Accessories

Product Facts:

l Rack Mount kit to enable 250 mm wide devices to be installedin 190 racking

Model Part Number

190 Rack Mount Kit 0-1591068-0

European StandardSuffix: -2

SwitzerlandSuffix: -3

ItalySuffix: -4

DenmarkSuffix: -5

Great Britain and Ireland

Suffix: -7

Rack Mount Kit

International Power Supplies:

All products are supplied with the required power cord. To specify the correct power cord for your country substitute the numberbelow for the ‘-x’ suffix in the order code.The most common types are shown below – international types also available on request.

DIN Installation Environments 102

BS Installation Environments 105

US Installation Environments 106

Swiss Installation Environments 108

45 x 45 Installation Environments 110

5UniversalOutlets/Faceplates (unpopulated)

Universal Faceplates and Outlets

l Outlet styles to meet every need

l For shielded or unshielded copper as well as fiber

l Straight and angled outlets available

l Single, double and multiple gang outlets available

l The 5 most popular installation environments in Europe are available:– DIN (Germany)– US Standard (USA)– BS (United Kingdom)– “EDIZIOdue”/“FLF” (Switzerland)– 45 x 45 (France)

l Stainless steel faceplates for EtherSeal

l A comprehensive range of accessories is available

l Blanking plates also available

Uni

vers

al O

utle

ts/F

acep

late

s


DIN Installation Environments (Germany)

DIN Flushmount 3 Port Angled Outlet

DIN 3 Port Angled Outlet

DIN Dual Angled Outlet

DIN Standard Outlet for Recessed Mounting


50 x 50 mm DIN 3 port angled outlet without plastic frame Y-0336613-1

50 x 50 mm DIN 3 port angled outlet with 80 x 80 mm plastic frame* Y-0336614-1

* For surface mount use Back Box Y-0966740-1 see page 103

Product Facts:

l 3 port outlet to accept up to 3 SL Series Jacksl Especially for AMP-TWIST 7AS SL Jackl 50 x 50 mm footprintl Supplied complete with 2 removable /

replaceable blanking plates l Individual ports are iconable (see page 133)l For use in backbox

Y- Color



DIN flushmount 3 port angled outlet (incl. 50 x 50 faceplate & 80 x 80 frame)* 0-1711537-X

DIN flushmount 3 port angled outlet (incl. 50 x 50 faceplate) 0-1711485-X

DIN flushmount 3 port angled outlet UP0 (mounting frame only) 0-1711490-1



DIN Dual Angled Outlet* Y-0966936-5



DIN standard outlet Y-0966223-1

DIN dual straight outlet Y-0966224-1


Product Facts:

l 3 port outlet to accept up to 3 SL Series Jacks (no AMP-TWIST 7AS jack)l Compatible with standard and designer 50 x 50 mm faceplates

and 80 x 80 mm frames l Individual ports are iconable (see page 133)l Not suitable for use in backbox

-X Color

-1 almond (RAL 1013)-2 pure white (RAL 9010)

Y- Color


Y- Color


Product Facts:

l Dual outlet to accept up to 2 SL Series Jacksl To be used with single or multiple gang DIN faceplatesl Supplied complete with back plate,

adapter plate and shuttersl Individual ports are iconable (see page 133)

Product Facts:

l Dual outlet to accept up to 2 SL Series Jacksl To be used with single or multiple gang DIN faceplatesl Supplied complete with spring loaded shutterl Only use SL Jacks without dustcover

For modular jacks see pages 20/21 and 34/35


Uni

vers

al O

utle

ts/F

acep

late

s


103

DIN 50 x 50 mm Faceplate Frame


80 x 80 mm Faceplate Frame for 50 x 50 mm outlets 5-0336608-X

Product Facts:

l Faceplate suitable for all outlets with a 50 x 50 mm footprint

l External Dimensions 80 x 80 mm


Single Faceplate Frame Y-0964830-1

Dual Faceplate Frame Y-0964361-2

Triple Faceplate Frame Y-0964361-3


DIN Surface Mount Outlet Back Box Y-0966740-X

Adaptor DIN RAIL to DIN Surface Mount Outlet Back Box Y-1671164-1

Product Facts:

l Back Box for Surface Mountingl Available individually or as a complete kit with a single faceplatel Not suitable for use with multiple faceplates

-X Type

-1 Back box only-2 Back box + faceplate

Product Facts:

l Faceplate suitable for all outlets with a 75 x 75 mm footprint l External Dimensions 80 x 80 mm

Y- Color


Y- Color


-X Color

-1 pure white (RAL 9010)-2 almond (RAL 1013)-3 black (RAL 9005)

Single and Multiple DIN Faceplate Frames

DIN Surface Mount Outlet Back Box

Uni

vers

al O

utle

ts/F

acep

late

s




Universal Mounting Bracket 0-0966498-1


Floor box bracket 0-1394294-X

Blanking plate (almond) 0-0964719-1

Product Facts:

l Universal Mounting Bracket for installations into trunkingl Suitable for installation into trunking with a “C-Profile”

Product Facts:

l Mounting Bracket for installations into Ackermann floor boxesl Supplied complete with fixing screwsl Stainless Steel bracketl Complete with strain relief handlel 2 lengths available – with or without cable managementl Blanking plate available separately

-X Type

-1 3 Gang without Management-3 2 Gang without Management


SL Jack mounting frame 0-1711255-X

Product Facts:

l High density SL applications in floor box environmentsl Angled geometry for easy cable management l Frame is iconable and provides labeling spacel May be modified to suit almost any floor box applicationl SL Jacks with dust covers recommended for use within these framesl Patent pendingl Available chromalized or in black (RAL 9005)l Chromalized version is equipped with VDE grounding bolt

-X Type/Color

-1 6 Ports black (short version)-2 9 Ports black (long version)-3 6 Ports chromalized (short version)-4 9 Ports chromalized (long version)

Universal Mounting Bracket

Floor Box Bracket for OBO Bettermann GESR 7/10

SL Jack Mounting Frame for OBO Bettermann Floor Boxes


Ackermann is a Trademark of OBO Bettermann


Uni

vers

al O

utle

ts/F

acep

late

s

BS Installation Environments (United Kingdom)

105

Product Facts:

l Unloaded faceplate accepts either 2 or 4 BS 50 mm shuttered modulesl Dimensions faceplate: 86 x 86 mm (single gang) or

145 x 86 mm (dual gang)l Single shuttered 50 mm module (spring loaded shutter)l Dimensions module: 25 x 50 mm

Color: signal white (RAL 9003)

Product Facts:

l Unloaded faceplate accepts either 1 or 2 LJ6C shuttered modules l Dimensions faceplate: 86 x 86 mm (single and dual port) l Single shuttered LJ6C module (spring loaded shutter)l Unshuttered module suitable for AMP-TWIST 7ASl Dimensions module: 25 x 39 mm

Color: signal white (RAL 9003)


Single gang faceplate (for 2 shuttered modules) 0-1711399-1

Dual gang faceplate (for 4 shuttered modules) 0-1711400-1

Single shuttered 25 x 50 mm angled module 0-1711275-1

Blanking plate 25 x 50 mm 0-1711403-1

Blanking plate 12,5 x 50 mm 0-1711404-1


Single port LJ6C unloaded faceplate 0-1711301-1

Dual port LJ6C unloaded faceplate 0-1711302-1

Single shuttered LJ6C module 0-1711348-1

Single shuttered angled LJ6C module 0-1859096-1

Single unshuttered angled LJ6C module 0-1711775-1

Blanking plate 0-1711491-1

BS 50 mm Unloaded Faceplates and Shuttered Modules

BS LJ6C Unloaded Faceplates and Shuttered Modules


Uni

vers

al O

utle

ts/F

acep

late

s


US Installation Environments

Product Facts:

l Accepts AMP-TWIST jacks and all SL series jacks l Compatible with most trunkingl High densityl Individual outlets are iconable (see page 133)l Patented icon holes remain invisible when not used


2 Port 0-1933287-X

4 Port 0-1933288-X

-X Color

-1 almond-2 black-3 pure white

-X Color

-1 almond-2 black-3 pure white

Product Facts:

l 2, 4 and 6 port version accept all modular jacks (except AMP-TWIST jacks)

l 12 port version suitable also for AMP-TWIST jacksl Low Profilel Cable entry on three sides and basel Individual outlets are iconable (see page 133)


2 Port 0-1479488-X

4 Port 0-1479489-X

6 Port 0-1479490-X

12 Port 0-1479358-X

Blanking plate 0-1479494-X

Product Facts:

l Accepts Standard 110Connect and SL series jacks (except AMP-TWIST jacks)

l Very compactl Individual outlets are iconable (see page 133)l Patented icon holes remain invisible when not used


2 Port single gang work area outlet 0-0557505-X

4 Port staggered single gang work area outlet 0-0557502-X




1 Port 0-1116697-X

2 Port 0-1116698-X

Product Facts:

l 2 Port Single Gang Work Area Outlet accepts up to 2 jacksl Single Gang formatl Individual outlets are iconable (see page 133)l Dimensions: 114,3 x 69,9 mm

-X Color

-1 almond-3 pure white

-X Color


Standard US Faceplate Single Gang

Modular Jack Boxes

AMP-TWIST SL Jack Office Boxes

Universal Office Boxes


Uni

vers

al O

utle

ts/F

acep

late

s

US Installation Environments

107


Blank Insert (rear mounted) 0-1116412-X

Product Facts:

l Blank Insert to keep dust out of unused ports(not suitable for 110Connect Office Boxes)


Single Gang 0-0558251-X

Product Facts:

l Back Box for Surface Mountingl 44,5 mm depth and one piece construction

simplifies installation

-X Color


-X Color


Product Facts:

l Available in single and double gangl Accepts EtherSeal Jack or Coupler Kits

(not included, see pages 21 and 35)l Sealing gasket options availablel Kit includes 2 (for single gang) or 4 (for double gang) 6/320 screws

Description Without Gasket With Gasket

Single Gang 1 Port 0-1479593-1 0-1479593-2

Single Gang 2 Port 0-1479594-1 0-1479594-2

Double Gang 4 Port 0-1479595-1 0-1479595-2

Double Gang 2 + 2 Port (2 x Etherseal, 2 x SL Jacks) 0-1479596-1 0-1479596-2

Product Facts:

l NEMA 4 and 4X ratedl IP67 compliant when installed per instruction sheetsl For indoor and outdoor usel Provides fully sealed remote access to data and telephone servicesl Cable and conduit glands seal cable/conduit entries

Description Cable Exits Conduit Exits Part Number

Enclosure, 12 x EtherSeal 12 x M16 2 x M50 0-1479654-1



Product Facts:

l Cable and conduit glands provide a way to seal cable and or conduit entries into EtherSeal Connector Enclosures

Description For use with Part Number

Gland Kits M16 Cable 0-1479657-1

Gland Kits M40 3/4“ Conduit 0-1479658-1

Gland Kits M50 1“ Conduit 0-1479659-1

Surface Boxes

Blank Insert

EtherSeal Stainless Steel Faceplates

EtherSeal Enclosures

EtherSeal Cable & Conduit Glands

Uni

vers

al O

utle

ts/F

acep

late

s


Swiss Installation Environments

Product Facts:

l “Ediziodue compatible” 2 port faceplates suitablefor trunking, recessed or surface mounting

l Accepts all SL Series Jacksl Individual ports are iconable (see page 133)

Product Facts:

l “EDIZIOdue compatible” 2 port angled faceplates suitable fortrunking, recessed or surface mounting

l Accepts all SL Series Jacksl Large labeling field


UP see table 0-1711168-X

KNL see table 0-1711169-X

AP pure white (RAL 9010) 5-0101016-7


UP see table 0-1711604-X

KNL see table 0-1711632-X

AP see table 0-1711633-X

-X Color

-1 pure white (RAL 9010)-4 black (RAL 9005)

-X Color


“EDIZIOdue Compatible” 2 Port Straight

“EDIZIOdue Compatible” 2 Port Angled with Adaptor Plate

Product Facts:

l “EDIZIOdue compatible” 3 port angled faceplates suitable for trunking or recessed mounting

l Accepts all SL Series Jacks (except AMP-TWIST 7AS)l Self-adhesive labels are available (see page 135)l Individual ports are iconable (see page 133)


UP, 3 port pure white (RAL 9010) 0-1711625-1

KNL, 3 port pure white (RAL 9010) 0-1711626-1

“EDIZIOdue Compatible” 3 Port DIN Flushmount Angled

Product Facts:

l “EDIZIOdue compatible” 3 port DIN angled faceplates suitable for trunking or recessed mounting

l Accepts all SL Series Jacksl Self-adhesive labels are available (see page 135)l Individual ports are iconable (see page 133)


UP, 3 port pure white (RAL 9010) 0-1711082-1

KNL, 3 port pure white (RAL 9010) 0-1711083-1

“EDIZIOdue Compatible” 3 Port DIN Angled


Product Facts:

l Dual faceplate suitable for frame and floor box mountingl Accepts all SL Series Jacks


FLF pure white (RAL 9010) 0-1711606-1

FLF black (RAL 9005) 0-1711606-2

“FLF” 2 Port


Uni

vers

al O

utle

ts/F

acep

late

s

Swiss Installation Environments

109

Product Facts:

l “Standard” Style 2 port faceplates suitable for trunking or recessed mounting

l Accepts all SL Series Jacksl Individual ports are iconable (see page 133)


UP pure white (RAL 9010) 7-0101016-3

KNL pure white (RAL 9010) 7-0101016-5 AP version = UP version + surfacemount backbox

“Standard” 2 Port Straight

Product Facts:

l “Standard” 2 port angled faceplates suitable for trunking, recessed or surface mounting

l Accepts all SL series jacks l Large labeling field


UP pure white (RAL 9010) 0-1711605-1

KNL pure white (RAL 9010) 0-1711644-1

AP pure white (RAL 9010) 0-1711634-1

“Standard” 2 Port Angled with Adaptor Plate

Product Facts:

l “Ediziodue compatible“ 4 port straight faceplates l Accepts all SL Series Jacksl Self-adhesive labels are available (see page 135)l Individual ports are iconable (see page 133)


KNL, 4 port pure white 0-1711282-1

KNL, 4 port black 0-1711282-2

“EDIZIOdue Compatible” 4 Port Straight

Product Facts:

l Blanking plate to be inserted from frontside


Blanking Plate (inserted from frontside) see table 0-1711283-X

Blanking Plate

-X Color



Uni

vers

al O

utle

ts/F

acep

late

s


Installation Environments (France)

Product Facts

l Single Port half width shuttered module (spring loaded) with 22,5 x 45 mm footprint

l Single Port full width shuttered module (spring loaded) with 45 x 45 mm footprint

l Dual Port full width shuttered module (spring loaded) with 45 x 45 mm footprint

Color: pure white (RAL 9010)

Product Facts:

l Dual outlet for one or two SL Jack(s) or one Standard 110C-Jack with adaptorl Incl. blank adaptor for use with only one jack

(mandatory if AMP-TWIST Jack is used)l Single outlet for one SL Jack or one AMP-TWIST Jack with adaptorl 45 x 45 mm footprint


Dual Port outlet 45 x 45 mm angled for 2 SL jacks or 1 AMP-TWIST Jack pure white (RAL 9010) 0-0336793-1

Dual Port outlet 45 x 45 mm angled for 2 SL jacks (not suitable for AMP-TWIST Jacks) white (RAL 9003) 0-1711417-1

Single Port outlet 22,5 x 45 mm angled for1 SL jack or 1 AMP-TWIST Jack white (RAL 9003) 0-1711664-1


Single Port Module 22,5 x 45 mm 0-1711349-1

Single Port Module 45 x 45 mm 0-1711277-1

Dual Port Module 45 x 45 mm 0-1711276-1

SL Toolless Jackshielded (page 35)

SL 110Connect Jackunshielded (page 20)

SL Toolless Jackunshielded (page 20)

SL 110Connect Jackshielded (page 34)

SL Modular Coupler(page 21)

AMP-TWIST 6S SL Jackshielded (page 34)

SL MT-RJ Work-station Jack (page 76)

Dual Outlet 45 x 45 mm Angled

Unloaded Full and Half Width Shuttered Modules

AMP-TWIST 7AS SL Jack(page 34)

The modules and faceplates depicted in this chapter can be used with the following jacks(please note that restrictions may apply to some faceplate/jack combinations):

Lightrax Fiber Optic Raceway System 112

AMP Hi-D System 115

Cable Management Bars 119

110XC CrossConnect Management 120

6Cable Management

Cable Management

l Fully enclosed fiber optic ducting system

l AMP Hi-D System with integrated bend control

l Allows easy routing of patch cords in 190 racks and cabinets

Description Angle Direction Part Number

40 x 40 horizontal elbow 45° – D36052-000

40 x 40 vertical elbow 45° inside up A15840-000

40 x 40 vertical elbow 45° outside down F05550-000

40 x 40 horizontal elbow 90° – E04692-000

40 x 40 vertical elbow 90° inside up F59635-000

40 x 40 vertical elbow 90° outside down C21968-000

Product Facts:

l Creates an angle 45° or 90° from a straight horizontal runl Haircell textured surfacel All elbows provided with coverl Velcro facilitates easy access to patchcordsC

able

Man

agem

ent


Lightrax Fiber Optic Raceway System


40 x 40 4-way cross F00457-000

Product Facts:

l Creates a horizontal 4-way cross intersectionl Haircell textured surfacel Cover includedl Velcro facilitates easy access to patchcords

4-way Cross

Elbow

Channels

Description Style Part Number

40 x 40 channel with cover Solid F01365-000

40 x 40 channel with cover Slotted D89498-000

Product Facts:

l Channel length is 2,0 ml Haircell textured surfacel Solid and slotted channels availablel All channels provided with coverl Velcro facilitates easy access to patchcords

Description Direction Part Number

40 x 40 tee Horizontal C24749-000

40 x 40 tee Vertical F51896-000

Product Facts:

l Creates a 90° horizontal or vertical branch from straight horizontal runs

l Haircell textured surfacel Cover includedl Velcro facilitates easy access to patchcords


Cab

le M

anag

emen

t


113


Quick drop – full cover D33188-000

Quick drop – modified cover A63116-000


40 x 40 channel splice A65892-000

40 x 40 fitting splice D80439-000

40 x 40 end cap D30612-000

4" X 4" trumpet F57966-000

40 x 40 slotted channel trumpet flare F00909-000

Product Facts:

l Can fit on the duct or in the ductl Haircell textured surfacel Cover includedl Max capacity: 100 (3 mm patch cords)

Product Facts:

l Haircell textured surface

Quick Drop

Channel & Fitting Accessories

Tee


Hardware kit 200 C26973-000

20 or 40 ladder rack mounting kit 5 CC4342-000

20 or 40 offset ladder rack mounting kit 5 CC4339-000

40 end-accessible threaded rod kit 5 107940-000

40 saddle bracket 5 655362-000

40 equipment rack horizontal mounting kit 5 670812-000

40 equipment rack vertical mounting kit 5 962294-000

40 hanger bracket 5 C27579-000

40 side wall support 5 C71902-000

Product Facts:

l Suitable for M14 and M16 threaded rodsl Threaded rod purchased separatelyl Brackets are recommended every 900 mm for direct

channel mounting

Cab

le M

anag

emen

t



Hardware & Mounting Kits


10 split flex tubing –12,5 m 1 C70231-000

20 split flex tubing –12,5 m 1 F05403-000

40 square to dual round adaptor 1 E46685-000

Anchor clamp for 20 tube 10 CC3459-000

Anchor clamp for 10 tube 10 CC3458-000

Adaptor to two 10 flextubes 1 D35033-000

Adaptor to one 20 flextube 1 D35786-000

Product Facts:

l Split Flex Tubing provides a vertical pathway to the equipmentl Adaptors for 10 and 20 flex tubes

Flex Tubing and Accessories


Drilling template E49510-000

Quick drop template A14042-000

Product Facts:

l Easy positioning of holes in ductl Slides over the ductsl Quick Drop template to be used

when installation in the duct

Installation Tools


Cab

le M

anag

emen

t

AMP Hi-D System

115

AMP Hi-D 190 2 and 4 Post Racks

Product Facts:

l 45 U on 2200 mm heightl High strength aluminum constructionl Universal 190 EIA hole pattern including unit identification


Description Thread Part Number

AMP Hi-D 190 2 post rack Metric 1-1671106-1

AMP Hi-D 190 2 post rack UNC 1-1671106-2

AMP Hi-D 190 4 post rack Metric 0-1671141-1

AMP Hi-D 190 4 post rack UNC 0-1671141-2

AMP Hi-D Cable Ducts

Product Facts:

l 45 U on 2200 mm heightl Cable duct available in left and right versionsl Versions with 1 or 2 doors availablel Doors can be ordered separatelyl Key lockablel Cable managers included



AMP Hi-D 6" Cable Duct Left Y-1671107-1

AMP Hi-D 6" Cable Duct Right Y-1671108-1



AMP Hi-D 12" Cable Duct Y-1671109-1



AMP Hi-D 6" Door Left 0-1671192-1

AMP Hi-D 6" Door Right 0-1671192-2





AMP Hi-D 12" Door 0-1671192-7

Y- Doors

0- 11- 2

AMP Hi-D Central Doors

Product Facts:

l Key lockablel Closed cabinet lookl Vented version available



AMP Hi-D central doors 1-1671110-1

AMP Hi-D central doors vented 1-1671110-2

Cab

leM

anag

emen

t


AMP Hi-D System

Product Facts:

l Sidepanels for 2 and 4 post racksl Vented version available for 4 post racksl Aestheticsl Close an array of frames

Product Facts:

l Easy guiding and routing of patchcords from one rack to an adjacent rack

l Cable fixing possible using velcro cable ties

Product Facts:

l Ensures a stable constructionl Can be used below raised floorsl Suitable for 2 & 4 post racks


AMP Hi-D 2 post sidepanel 1-1671112-1

AMP Hi-D 4 post sidepanel 1-1671179-1

AMP Hi-D 4 post sidepanel - vented 1-1671179-2

AMP Hi-D Sidepanel

AMP Hi-D Rack Top Cable Trough

AMP Hi-D Raised Floor Kit


AMP Hi-D rack top cable trough 0-1671140-1


AMP Hi-D raised floor kit (100-250 mm) 1-1671142-1




Product Facts:

l 1 U fixed style rack mountl Designed to be used in 4-Post Racksl Can accept electronic equipment up to 300 kgl Bracket or shelf version available


AMP Hi-D Heavy Duty Fixed Brackets / Shelf


AMP Hi-D Heavy Duty Fixed Bracket 1-1671181-1

AMP Hi-D Heavy Duty Fixed Shelf 1-1671181-2


Cab

leM

anag

emen

t

AMP Hi-D System

117

AMP Hi-D Cable Managers

Product Facts:

l Bend controlled exit of patchcords acc. to EN 50173 & ISO/IEC 11801 table 25

l Re-openable cover for ease of MAC-operationsl Stressless cable holding eliminates

radial compression of cablesl Suitable for twisted pair & fiber optic patch cordsl For cabinet mounting only


AMP Hi-D 1 U cable managers 0-1671132-1




AMP Hi-D cable manager clip 0-1671184-1

AMP Hi-D 2 U Pass Through Duct


AMP Hi-D 2 U pass through duct 1-1671080-2

Product Facts:

l 2 U pass through ductl Allows left to right side patching as well as front to

back patching and intra-cabinet patchingl Hinged access cover ensures accessibility of installed patch cordsl Can be used in racks and cabinets


AMP Hi-D 1 U Blind Panels


AMP Hi-D 1 U blind panel angled 0-1671113-1

AMP Hi-D 1 U blind panel straight 0-1671113-2

Product Facts:

l 1 U blind panels for the AMP Hi-D management solution l Angled version to leave a space in between AMP Hi-D panels l Straight version to fill space between AMP Hi-D panels and

straight panels or active equipmentl Can be used in racks and cabinets


Product Facts:

l 19" 4 U shelf with 16 vertical slotsl Each slot accepts max. 8 stacks of MRJ21 cable assembliesl Tie down possibilities at the back of the shelf


MRJ21 Cable Guiding Shelf


MRJ21 Cable Guiding Shelf 0-1671175-1

UNC 12–24 M6

M6 + Cage Nuts

Cab

leM

anag

emen

t


AMP Hi-D Accessories

Product Facts:

l Hardware to attach panels and equipment to racks and cabinets

l Metric or UNC version availablel Packaging quantity: 50 and 500

Product Facts:

l Hook and loop ties l No risk of damaging cables l Releasable and reusable l An order quantity of one equals one roll of 10 ties

Mounting Hardware

Velcro Cable Ties


Screw set (50 pcs) M6 0-1671147-1

Screw set (500 pcs) M6 0-1671147-2

Screw set (50 pcs) UNC 12-24 1-1671147-1

Screw set (500 pcs) UNC 12-24 1-1671147-2

Screw set (50 pcs) M6 + cage nuts 0-1671147-3

Screw set (500 pcs) M6 + cage nuts 0-1671147-4


AMP Hi-D 10 x 80 (10 pcs.) 0-1375253-2

AMP Hi-D 10 x 120 (10 pcs.) 0-1375254-2

Product Facts:

l Fully flexible system for installing 19” patch panels underneath the racks in the false floor area

l Pedestals distance max. 630 mml The clamping range varies from 14 mm up to 30 mml Pedestal shape can be round or square

Subfloor Panel Holder Kit


Subfloor Panel Holder Kit 1 0-1671189-1



Product Facts:

l Designed to handle fiber optic patch cords overlengthl Can be used in 8" and 12" cable ductsl Dimensions: 188,5 x 16 x 8 cm (H x D x W)l Drums can be removed and replaced to fullfill customer needs


AMP Hi-D Fiber Organizer Drum Plate


AMP Hi-D fiber organizer drum plate 0-1671190-1


Cab

leM

anag

emen

t

Cable Management Bars

119

Product Facts

l Panels mount to the front of 190 racks and provide for the orderlydressing and routing of cable assemblies

l Various ring lengths availablel 1 U high

Description Color Ring length Part Number

5 rings black (RAL 9005) 95 mm 0-0558329-1

4 rings light grey (RAL 7035) 60 mm 9-0101019-0

4 rings light grey (RAL 7035) 80 mm 9-0101019-1

4 rings black (RAL 9005) 60 mm 9-0101019-5

1 U Cable Management Panels 190

MPO Back Cable Manager

MRJ21 Back Cable Manager


Cable Management Bar 100 mm depth 0-1711314-1



Product Facts:

l 190, 1 U rear cable management barl Used for MPO front panels l 3 depths availablel Applications include new installation and retrofitl Rear or front of rack or cabinet mount



Back Cable Manager 60 (150 mm) depth 0-1933352-1




Product Facts:

l 190, 1 U rear cable management barl Used for MRJ21 or other high density copper or fiber optic panels l Simple on site assemblyl Applications include new installation and retrofitl Rear or front of rack or cabinet mountl 4 depths availablel Tie-down capability on side brackets and back tie-down barl Tie-down bar is adjustable for horizontal or vertical cable strain relief


Cab

leM

anag

emen

t


110XC CrossConnect Management

Product Facts:

l 190 Rack Mount Panel for XC cable managementl 2 U high


XC Cable Management Panel 0-0406641-X


with legs 0-0569389-X

without legs 0-0569597-X

Product Facts:

l Provide horizontal management and organization of cablesl Troughs are available with or without legs


300 pairs 0-0569851-X

900 pairs 0-0569852-X

Product Facts:

l Provides high capacity storage of patch cables and jumper wirel Quick and easy installationl Available in 300 and 900 pair sizes


145 mm width 0-0569431-1

216 mm width 0-0569599-1

Product Facts:

l Provide vertical management and organization of cablesl Available in two widthsl Suitable for mounting directly to a plywood backboard

-X Color

-1 Ivory-2 Black

-X Color

-1 Ivory-3 Black

-X Color

-1 Ivory-3 Black

110XC CrossConnect Rack Mount Panel 190

110XC CrossConnect Cable Management Troughs

110XC CrossConnect Vertical Cable Management Frame

Cable Management Rings

Twisted Pair Tools 122

Fiber Optic Tools 124

Administration / Labeling 133

7Tools &Labeling

Tools and Labeling

Installation Tools

l For Twisted Pair: Pliers, Crimp Tools, Impact Tools, Cutters

l For Fiber Optic: Tool-Sets, Cleavers, Crimp Tools, Microscopes, Epoxy, Test Kits

Labeling Accessories

l Adhesive Labels, Labeling Software, Icons

l Quick and durable identification

Too

ls &

Lab

elin

g


Twisted Pair Tools


Premium Impact Tool with Extended-Life Blade 0-1375308-1

Standard Impact Tool with Standard Blade 0-1583608-1

Non-Impact Tool with Standard Blade 0-1583236-1

Replacement Blade (Extended-Life) 0-1375309-1

Replacement Blade (Standard) 0-1375310-1

UCS Impact Tool 449526-000

Product Facts:

l Industry standard termination tools for 110Connect, AMP CO Plus and other LSA+™ compatible Jacks

l Available as impact tool (standard or premium version) or as non-impact tool

l Tools are delivered with blade


AMP CO Plus Pistol-Grip Tool with lacing fixture 0-1711500-1

Product Facts:

l Pistol Grip Tool for easy termination of shielded Edge Connector Mark II l Ensures repeatable high termination quality l Considerably reduces termination time by using Tyco Electronics’

Automatic Wire Cutting (AWC)


Handheld tool kit (tool and pouch) for 110C jacks (incl. fixture) 0-1725150-1

Handheld tool kit for AMP-TWIST 6S and 7AS jacks (without fixture) 0-1725150-3

Separate handheld tool (spare part) 0-1725080-1

110C lacing fixture (spare part) 0-1673956-1

Product Facts:

l Terminates Cat. 3, 5E and 6 SL jacks (110C, AMP-TWIST 6S and AMP-TWIST 7AS)

l Strips cable, marks foil, terminates and cuts 8 conductors at oncel Lacing fixture for 110C assures simple and efficient use

(not used for AMP-TWIST 6S and AMP-TWIST 7AS)l Maintains twisted pair integrityl Reliable connections everytimel Time and cost saving

110C Impact Tools

Pistol-Grip Field Termination Tool for AMP CO Plus

Handheld Field Termination Tool for SL Jacks


Too

ls &

Lab

elin

g

Twisted Pair Tools

123

Product Facts:

l Easy, safe and fast cable preparationl Cyclops cuts the cable sheath onlyl Diagonal Cutter for precise cutting of wire


Cyclops 0-1375317-1

Diagonal Cutter 0-1116571-1


Standard tool set 1-0231666-0

Professional tool set 1-0231666-3

Product Facts:

l Complete tool set for the termination of unshielded and shielded modular plugs

l Standard version contains 2 die sets for 4, 6 and 8 position standard modular plugs

l Professional version contains 4 die sets for 4, 6 and 8 position standard and 4 position hand set modular plugs


EMT PRO-CRIMPER III Tool Set 0-1711303-1

Product Facts:

l Installer’s complete tool set for field termination of high performance EMT modular plugs

l contains all tools needed: hand tool, die set, diagonal cutter andCyclops cable stripper

l 100 EMT plugs plus 20 anti-tangle boots in 6 different colors


Unlocking tool 0-0726948-1

Preparation Template English/German 0-0336547-1

Preparation Template French/German 0-0336547-2

Palmtool 0-0569949-1

Product Facts:

l Unlocks the rear cover of AMP CO Plus housingsl 1 : 1 scale cable preparation template for precise high quality

termination of the shielded edge connector Mark II l Palm tool for precise and safe termination

of the shielded edge connector Mark II

AMP CO Plus Accessory Tools

Separate Tools

Standard Tool Set for Modular Plugs

PRO-CRIMPER III Tool Set for EMT Plugs

Too

ls &

Lab

elin

g


Fiber Optic Tools


Universal no epoxy termination tool kit 0-1278949-3

Product Facts:

l Includes all tools necessary for installing – MT-RJ jacks and MT-RJ Secure jacks– LightCrimp Plus ST-Style, SC and LC connectors– SC, LC and LightCrimp ST-Style and SC connectors

l Termination tool kit includes:– PRO-CRIMPER III Hand Tool and appropriate die set– Stripper tools– Kevlar scissor– Cable holder– Cleave tool – LightCrimp Plus Termination Video CD-Rom


MT-RJ Tool Kit 0-1278346-2

Product Facts:

l Tool kit includes:– Soft case– Cleave tool– Miller strip tool– Cable stripper– Micro stripper

– Kevlar scissors– MT-RJ strip length template– Actuator key– Alcohol wipes– MT-RJ Termination Video CD-Rom

Product Facts:

l Termination tool kit includes:– PRO-CRIMPER III Hand Tool and appropriate die set– Stripper tools– Kevlar scissor– Cable holder– Cleave tool – LightCrimp Plus Termination Video CD-Rom


LightCrimp Plus ST-Style, SC, LC Connectors and MT-RJ Jack Termination Tool Kit 0-1278118-5

LightCrimp Plus ST-Style, SC, LC Connectors and MT-RJ Jack Termination Tool Kit without microscope 0-1278118-4

LightCrimp Plus SC Connector Termination Tool Kit 0-1278022-2

LightCrimp Plus ST-Style Connector Termination Tool Kit 0-0492697-2

LightCrimp Plus LC Connector Termination Tool Kit 0-1754845-2

LightCrimp Plus LC Adaptive Kit 0-1754846-1

LightCrimp Plus LC Upgrade Kit 0-1754847-1

Universal No Epoxy Termination Tool Kit

MT-RJ Jack Termination Tool Kit

LightCrimp Plus Termination Tool Kits


Too

ls &

Lab

elin

g

Fiber Optic Tools

125


SC 0-1278023-1

ST-Style 0-0492703-1

LC 0-1754138-1

Product Facts:

l Stripping template and cable holder for LightCrimp Plus terminationsl Included in the LightCrimp Plus tool kit


LightCrimp Universal Cleave Tool 0-0503705-1

Product Facts:

l Used in both SC and ST-Style LightCrimp Connector terminationsl Included in all LightCrimp tool kits

Description Type Microscope Part Number

LightCrimp SC Termination Kit No Microscope 0-0503706-1

LightCrimp ST-Style Termination Kit No Microscope 0-0503330-1

LightCrimp SC and ST-Style Termination Kit No Microscope 0-0503957-1

LightCrimp SC and ST-Style Termination Kit Premium Microscope 0-0503957-2

LightCrimp SC and ST-Style Mini Tool Kit No Microscope 0-0492543-1

Product Facts:

l Tool kits include:– PRO-CRIMPER III Hand Tool and appropriate die set– Stripper tools– Kevlar scissor– Template strip– Cleave tool– Polishing bushings– Polishing films– Polishing plate– Microscope as listed*

*Microscope available separately on page 128

LightCrimp Termination Tool Kit

LightCrimp Universal Cleave Tool

LightCrimp Plus Cable Holder

Too

ls &

Lab

elin

g


Fiber Optic Tools

Product Facts:

l Applicable to LightCrimp Plus Connector, MT-RJ and Corelink terminations

l Lifespan of blade is approximately 10000 cyclesl Cleaving length: 4, 6, 8, 10, 16 mml For 900 µm and 250 µm fiber

Product Facts:

l Hand tool and die sets for fiber optic connectors


PRO-CRIMPER III Hand Tool only 0-2064431-1

Fiber Optic Die Sets

Description Cable Jacket Diameter Die Set Hand Tool(mm) and Die Set

ST-Style 3.0 0-0058424-1 0-0058433-4

SC 3.0 0-0503910-1 0-0503911-1

SC 2.0 & 2.4 / 2.5 & 3.0 0-0492025-1 0-0492026-1

LC Epoxy 1.6–2.0 & 2.4 & 3.0 0-1588175-1 0-1588176-1

LightCrimp Plus and LightCrimp ST-Style 2.0, 2.5 & 3.0 0-0492622-1 0-0492623-1

LightCrimp Plus and LightCrimp SC 2.5 & 3.0 0-0492783-1 0-0492782-1

LightCrimp Plus LC 0.9 0-1754136-1 0-1754137-1


Fiber Optic Cleave Tool 0-1871696-1

Product Facts:

l For convenient installation of AMP CORELINK splices


AMP CORELINK Splice Workstation 0-0503605-1

Fiber Optic Cleave Tool for Field Installations

AMP CORELINK Splice Workstation

PRO-CRIMPER III Hand Tool and Fiber Optic Die Sets


Too

ls &

Lab

elin

g

Fiber Optic Tools

127


Micro-Stripper for 900 µm buffer (mandatory for MT-RJ jack termination) 0-0492109-2

Micro-Strip Cable Jacket Slitter 0-2065543-1

Stripping tool for cable jackets 0-1278531-1

Miller Stripping tool for buffer, fiber coating and 2–3 mm jackets 0-1754708-1

Kevlar scissor 0-0501014-1

RECORDsplice stripping length indicator 8-1899183-4

Jacket stripper 0-0501198-1


Tool Kit with microscope and curing oven (230 V) 0-0501258-8

Tool Kit without curing oven and microscope 0-0501258-9

LC Upgrade Kit 0-1754462-1

Product Facts:

l Includes all necessary tools to install these connectors:ST-Style, SC, FSD, FC, D4, FSMA

l Epoxy sold separately (see page 130)l Tool kits include (except were specified otherwise):

– PRO-CRIMPER III Hand Tool and crimping dies– Polishing bushings– Polishing film– Cable and fiber strippers– Scissors– Scribe tool– Microscope with tripod and power source – Epoxy curing oven

Product Facts:

l Stripping tools, Micro-Stripper and Kevlar scissor for easy and save fiber preparation


SC/FC 0-0503746-7

ST-Style 0-0503746-1

LC Upgrade Kit 0-1754603-1

Product Facts:

l Tool kits include:– Carrying case– PRO-CRIMPER III Hand Tool and crimping dies– Polishing bushings– Polishing film– Cable and fiber strippers– Scissors– Scribe tool

l Kits contain polishing materials for approximately 60 connectors (consumables can be purchased separately on page 129)

l SC tool kit can also be used to install FC Connectors

Separate Tools

Pro-Installer Epoxy/Polish Type Connector Termination Tool Kit

Epoxy/Polish Type Connector Termination Tool Kit

Too

ls &

Lab

elin

g


Fiber Optic Tools

Microscope


Inspection Microscope Kit 0-1754767-1

Adapters


1.25 mm universal (LC and MU) 0-1754765-1

2.50 mm universal (SC, ST-Style and FC) 0-1754766-1

MT-RJ 0-1754768-1

SC/APC 0-1828833-1

MPO Multimode 0-1828836-1

MPO Singlemode 0-1828837-1

Product Facts:

l Optimal visual examination of terminated ends– unsurpassed 200x magnification

l Dual illumination– Coaxial for inspecting polish quality– Oblique for general conditions

l Field and laboratory examination for multimode and singlemode fibers

l Portablel Integral infrared filters for safety

– Do NOT use any microscope to view active fiber signalsl Long-life LED (appr. 100.000 hours of operation)


Sapphire tipped Scribe Tool 0-0504064-1

Replacement Blades 0-0504290-1

Product Facts:

l Long-lasting sapphire bladel Pen-type casingl For epoxy style connectors only

Each kit contains:

– Microscope with an impact resistant ergonomic rubber shelland high quality glass optics

– Padded carrying case with an integrated belt loop andinternal adapter storage pocket

– Neck lanyard with safety breakaway feature– Universal 2.5 mm ferrule adapter (for SC, ST and FC)

Inspection Microscope

Sapphire Tipped Scribe Tool and Accessories


Too

ls&

Lab

elin

g

Fiber Optic Tools

129

Product Facts:

l Acrylic polishing platel Self-adhesive polishing pad


Polishing plate 0-0501197-1

Polishing pad for polymer ferrules 21 cm diameter, white, self-adhesive 0-0501523-1

Polishing pad for ceramic ferrules 21 cm diameter, white, self-adhesive 0-0501858-1

Product Facts:

l Reduces time required to cure epoxy in fiber optic connectorsl Accepts all AMP NETCONNECT Fiber Optic Connectors that require epoxyl Comes equipped to cure up to four duplex connectors and

12 simplex connectors at oncel Optional blocks to allow up to 8 duplex and 24 simplex connectors availablel Variable temperature control (60°C to 125°C)l Includes thermometer and cable support bracket


Curing oven (220 Volt) incl. adapter block for 16 connectors 0-0502134-2

Adapter block for 24 single connectors 0-0502129-1

Adapter block for 8 duplex connectors 0-0502222-1

Adapter block for 1.6, 2.0 and 2.4 mm SC and LC connectors 0-1457628-1

Product Facts:

l Polishing bushings for all polishing processesl Curing sleeves for safe oven application

Description Used with Notes Part Number

Polishing bushing Ceramic and stainless steel ST-Style connectors Metal 0-0503337-1

Polishing bushing Ceramic, stainless steel and Polymer composite ST-Style connectors Black Polymer 0-0503304-1

Polishing bushing SC Connectors Black Polymer 0-0502631-1

Polishing bushing SC Connectors Metal 0-0503787-1

Curing sleeve Ceramic, stainless steel and Polymer composite ST-Style connectors 12 pcs 0-0502259-1

Curing sleeve SC Connectors 1 pc 0-0502656-1

Strip Card Kit ST-Style and SC Connectors – 0-0501818-1

Polishing bushing Ceramic LC Connectors – 0-1754074-1

Strip Card Kit LC Connectors – 0-1588756-1

Curing sleeve LC 900 µm 12 pcs 0-1457630-1

Curing sleeve LC jacketed cable 12 pcs 0-1457630-2

Polishing Bushing 2.5 mm Polishing Bushing SC ST-Style Curing Sleeve,2.5 mm bayonette

SC Curing Sleeve

Polishing Bushings, Curing Sleeves and Strip Card Kit

Hand Polishing Accessories

Epoxy Curing Oven

Too

ls&

Lab

elin

g


Fiber Optic Tools

Product Facts:

l General purpose epoxy for SC and ST-Styleepoxy polish connectors

l Long pot lifel Heat cured and room temperature epoxyl High service temperature

Product Facts:

l Pre-measured bi-packs for consistent resultsl Ideal for bonding fibers and optical componentsl Long pot lifel Heat cured and room temperature epoxyl High service temperaturel Supplied in 4-gram packs

Description Cure time/Temp. Pot life Color after Curing Viscosity (cps) Max. Temp. Glass transition-temp. Part Number

EPO-TEK 353ND 10 min @ 115°C 4 hr Red 2000 200°C 124°C 0-0504035-1

Product Facts:

l 3 ccl capacityl Ideal for epoxy


Adhesive applicator syringe 0-0501473-3

Mixing cup 0-0502282-2

Polishing Consumables

Description Connector Type Grit Grade Part Number

Epoxy-Polish Epoxy-Polish Epoxy-Polish Epoxy-Polish LightCrimpSC LC Singlemode ST-Style Multimode ST-Style SC and ST-Style

Hand Polishing Film* – – – – l 15 µm 0-0228433-9

Hand Polishing Film* l l l l l 5 µm 0-0228433-8

Hand Polishing Film* – – – l l 1 µm 0-0228433-7

Hand Polishing Film* l l l l l 0,3 µm 0-0228433-5

Hand Polishing Film** l – l – – – 0-0502748-2

Hand Polishing Film*** – l – – – 9 µm 0-1374484-1

* Packet of 10** Packet of 5*** Packet of 15

Application Connectors Cure time and Pot life Color Packaging Connectors Part Numbertemperature pro package

For manufacturing and FDDI, ESCON, 24 hr @ 25°C 30 mins blue 25 x 2 g 250 0-0501195-4field use ST-Style, FSMA 2 hr @ 65°C 30 mins

For manufacturing and all 30 mins @ 100°C 30 mins blue 1 x 70,8 g + 400 0-0502418-1field use 1 x 22,6 g

Adhesive Applicator Syringe and Polishing Films

EPO-TEK Epoxy

TRA-CON® and Hysol® Epoxy


Too

ls&

Lab

elin

g

Fiber Optic Tools

131


50 µm, MM Launch Lead Y-6695240-X

62,5 µm, MM Launch Lead Y-6695242-X

9 µm, SM Launch Lead Y-6695244-X


50 µm, MM Launch Lead Y-6695241-X

62,5 µm, MM Launch Lead Y-6695243-X

9 µm, SM Launch Lead Y-6695245-X

Today testing of fiber optic links is more sensitive than ever. AMP NETCONNECT test kits guarantee precise and replicable fiber testing. All kits contain connectors with controlled end faces and support testing with 3 jumper test method in accordance to ISO/IEC 14763-3.

Each kit contains:

– Test leads for simplex and duplex IL test– Test leads for CPR tests– Fiber coupling bushes– Two mandrels (MM only)– Cleaning aides– Instruction manual– Data sheet of end face geometry

Each kit contains:

– Launch and tail lead– Length 400m (MM) and 500m (SM)– Data sheet of end face geometry– Coupling bushings– Cleaning aides– Instruction manual

Y- -X Connector Type

0- -1 SC/PC to SC/PC0- -2 SC/PC to ST/PC0- -3 SC/PC to LC/PC0- -4 SC/PC to FC/PC0- -5 SC/PC to MT-RJ


0- -6 ST/PC to SC/PC0- -7 ST/PC to ST/PC0- -8 ST/PC to LC/PC0- -9 ST/PC to FC/PC1- -0 ST/PC to MT-RJ


1- -1 LC/PC to SC/PC1- -2 LC/PC to ST/PC1- -3 LC/PC to LC/PC1- -4 LC/PC to FC/PC1- -5 LC/PC to MT-RJ


1- -6 FC/PC to SC/PC1- -7 FC/PC to ST/PC1- -8 FC/PC to LC/PC1- -9 FC/PC to FC/PC2- -0 FC/PC to MT-RJ


0- -1 SC/PC to SC/PC0- -2 SC/PC to ST/PC0- -3 SC/PC to LC/PC0- -4 SC/PC to FC/PC0- -5 SC/PC to MT-RJ


0- -6 ST/PC to SC/PC0- -7 ST/PC to ST/PC0- -8 ST/PC to LC/PC0- -9 ST/PC to FC/PC1- -0 ST/PC to MT-RJ


1- -1 LC/PC to SC/PC1- -2 LC/PC to ST/PC1- -3 LC/PC to LC/PC1- -4 LC/PC to FC/PC1- -5 LC/PC to MT-RJ


1- -6 FC/PC to SC/PC1- -7 FC/PC to ST/PC1- -8 FC/PC to LC/PC1- -9 FC/PC to FC/PC2- -0 FC/PC to MT-RJ

For more Information see page 143

Explanation: Connector 1 – to test equipmentConnector 2 – under test

Explanation: Connector 1 – to test equipmentConnector 2 – under test


Cleaning lens book 0-0434376-1

Compressed air bottle 0-1206860-1

Cleaning stick 2,50 mm 0-0233069-1

Cleaning stick 1,25 mm 0-0233069-2

Cleaning stick MT-RJ 0-1391089-1

Powermeter Launch Lead Kits for Optical Testing and Certification

OTDR Launch Lead Kits for Optical Testing and Certification

Consumables for Power Meter and OTDR Launch Lead Kits

Too

ls&

Lab

elin

g


Fiber Optic Tools


Hand Held Visual Fault Locator incl. 2.5 mm adaptor 0-1828352-1

Hand Held Visual Fault Locator incl 2.5 + 1.25 mm adaptor 0-1828352-2

Adaptor for Hand Held VFL 1.25 mm 0-1828353-1

Product Facts:

l 650 µm (visible) Class 2 1.0 mW max. Diode Laserl Continuous and flashing (2–3 Hz pulsed) modes l Uses 1 “AA” style battery for >30 hours of continuous usel Standard 2.5 mm adapter for SC, ST, and FC connectorsl Optional 1.25 mm adapter for LC and MU connectors

Visual Fault Locator

MPO Cassette Cleaner

Fiber Optic Reel Cleaner

Fiber Optic Card Cleaner

Cleaning Sticks for Single Fiber Couplers


1 Slot 1 0-1918803-1

2 Slot 1 0-1918805-1

MT-RJ with pins 1 0-1918804-1

MTP/MPO with pins 1 0-1918802-1

Cleaner Refill 6 rolls 0-1918806-1


MTP/MPO Cleaner MTP I.B.C. 1 0-1918809-1


Card Cleaner 1 0-1918810-1

Card Cleaner Refill 100 sheets 0-1918811-1


2,5 mm stick cleaner 5 x 10 0-1918807-1

1,25 mm stick cleaner 5 x 10 0-1918808-1

Bulkhead Cleaner


SC 0-2064499-1

LC 0-2064500-1

MT-RJ 0-2064501-1


Too

ls&

Lab

elin

g

Administration / Labeling

133

Product Facts:

l Icons for port identification applicable to various faceplates for 110Connect, AMP CO and AMP-TWIST SL jacks

l Different colors and different symbols available

Product Facts:

l Labels for additional port marking in different colors l For dual AMP CO inserts l Available in six colors

-X Color

-0 Grey-1 Red-2 Green-3 Blue-4 Yellow-5 Black

Y- -X Color

0- -1 Almond0- -2 Red0- -3 Green0- -4 Blue0- -5 Yellow0- -6 Black0- -7 Orange0- -8 White0- -9 Violet1- -0 Grey


4x data, 4x neutral, 2x phone, 3x Cat.5 , 1x fax, 1x modem, 1x printer Y-0558176-X

4x neutral, 2x Cat. 5E, 2x Cat. 6, 2 x Cat. 6A and 1x V1, V2, D1, D2, D3, D4 Y-1375092-X

16x data Y-0558198-X

16x phone Y-0558199-X

16x neutral, available in -1, -6, -8 and 1- -0 Y-0558821-X


Labels (6 x 32 mm, 170 pcs per sheet) 10 sheets 0-0969704-1


90 labels per sheet (45 left and 45 right) 2-0101021-X

Product Facts:

l Self-adhesive A4 sheets with printer labels for port labelingl Uses standard Excel sheet

Icons

Labels for AMP CO Dual Inserts

Printer Labels

Too

ls&

Lab

elin

g



Product Facts:

l Kit includes fifty die-cut labels and clear plastic covers

l For use in US american outlets only (see pages 106/107)

l Included with compatible faceplate kits

Product Facts:

l Labels are designed to fit AMP NETCONNECTand similar faceplates and surface outlets

l Card stock labels are perforated and compatiblewith inkjet and laser printers

l Self-adhesive polyester labels are pre-cut andcompatible with laser printers

l Labels are supplied on 8.50 x 110(21,6 x 27,9 cm) sheets

l For use with 110Connect style and AMP CO outlets

Description Label Size (w x h) Labels per Sheet Standard Package Part Number

Card stock 1.980 x 0.3730 (5,0 x 1,0 cm) 72 5 sheets (360 labels) 0-1375356-1

Self-adhesive Polyester 1.980 x 0.3730 (5,0 x 1,0 cm) 72 5 sheets (360 labels) 0-1375357-1


Label Covers for Outlets 0-1375345-1

Labels for Work Area/Standard Labels for Outlet

Labeling-Software

Label Covers for Outlets

Product Facts:

l Compatible with Windows 95, 98, 2000, NT and XPl Flexible build option to produce more complex alphanumeric identifiersl Create identifiers consisting of up to 12 independent segmentsl Can cope easily with the new TIA/EIA-606-A standard identification sequencesl Insert symbols (all standard Windows symbols can be used)l Save and edit buildsl Fine tune adjustmentl Split your label format as requiredl Job notepad facility for builds saved to filel Adjust font style and sizel Context-sensitive help

Visit http://www.ampnetconnect.com to sample and purchase labelling software


Too

ls&

Lab

elin

g


135

Product Facts:

l AMP NETCONNECT Labeling Software allows customization of the universal labels listed for use with multiple products

l The Software provides cut lines to modify the labels for each particular application

l Number of labels per package will vary according to individual application

Product Facts:

l Labels are designed to fit AMP NETCONNECT and similar patch panels

l Card stock labels are perforated and compatible with inkjet and laser printers

l Self-adhesive polyester labels are pre-cut and compatible with laser printers

l Labels are supplied on 8.50 x 110 (21,6 x 27,9 cm) sheetsl Special 0.250 (6,4 mm) high label is provided for use

when icons are also desiredl For use with 110Connect and SL style panels


Card Stock 3.100 x 0.500 (7,9 x 1,3 cm) 36 5 sheets (180 labels) 0-1375351-1



Description Labels per Sheet Standard Package Part Number

Self-adhesive labels for Modular Jack Box, 1-Port 216 5 sheets (1080 labels) 0-1375358-1

Self-adhesive labels for Modular Jack Box, 2-Port 120 5 sheets (600 labels) 0-1375358-1

Self-adhesive labels for SL Series Office Box, 2-Port 120 5 sheets (600 labels) 0-1375358-1

Self-adhesive labels for SL Series Office Box, 4-Port 72 5 sheets (360 labels) 0-1375358-1

Self-adhesive labels for 110Connect Office Box, 2-Port and 4-Port 144 5 sheets (720 labels) 0-1375353-1

Product Facts:

l Includes twenty-five sheets, four clear plastic label covers per sheetl For use in 110Connect and SL series patch panels


Label covers for patch panel 0-1116044-2

Universal Labels

Patch Panel Labels

Label Covers for Patch Panels

Too

ls&

Lab

elin

g



Product Facts:

l Labels are designed to fit the AMP NETCONNECT 110XCCrossConnect System and other similar products

l Card stock labels: designed to fit into standard cleardesignation strips, available in TIA/EIA-606-A compliant col-ors, perforated, and compatible with inkjet and laser printers

l White self-adhesive polyester labels: designed for easyapplication to the front of the clear designation strips, pre-cut and compatible with laser printers

l Labels are supplied on 8.50 x 110 (21,6 x 27,9 cm) sheets


Card Stock 7.900 x 0.480 (20 x 1,2 cm) 18 5 sheets (90 labels) 0-1375354-X

Self-adhesive Polyester 7.900 x 0.480 (20 x 1,2 cm) 18 5 sheets (90 labels) 0-1375355-1


Clear Plastic Label Holder 0-0558417-1

Product Facts:

l Used with 110XC CrossConnect system

Product Facts:

l Labels are designed for use oncable and cable assemblies

l Labels are pre-cut and compatiblewith laser printers

Description Label size (w x h) Labels per Sheet Standard Package Part Number

4-Pair Cable 0.9840 x 1.4960 (2,5 x 3,8 cm) 48 5 sheets (240 labels) 0-1479002-1

Self-adhesive Polyester 25-Pair Cable 0.9840 x 2.4800 (2,5 x 6,3 cm) 24 5 sheets (120 labels) 0-1479003-1

110XC CrossConnect Labels

Label Cover for 110XC Wiring Blocks

Labels for Cable and Cable-Assemblies

-X Color

-1 White-2 Blue-3 Green-4 Purple-5 Red-6 Brown-7 Yellow-8 Orange-9 Grey

Part Number Index 138

EIA/TIA Wiring Diagrams 142

Reliable Performance 143

Imprint 144

8Index

Index

l Complete breakdown of all partnumbers contained within the catalog

l Wiring diagrams according EIA/TIA 568A and B

l XG 10 Gb/s approved: Ensures the high-speed service 10 Gigabit Ethernet over copper (IEEE 802.3an) as well as over fiber (IEEE 802.3ae)

l Pyramid Tested: The logo for quality and performance of real Category 6 components

l Optimized Physical Contact: Controlled ferrule end faces guarantee highest data transmission quality

l RoHS conformity

l Imprint, addresses of Country Sales Offices, disclaimers

Ind

ex


Part Number Index

Preferred Items System

Highlighted items indicate preferred system components that are subject to a minimum stock holdings and increased availability.Please take into account highlighted prefixes and suffixes for component part number with multiple variations to establish thepreferred option(s).

For example, in the tables shown on right hand side the following cases apply:

l Part Number 1-0599144-5 (OM1 cable, 4 fibers, on 1 km reel) is a preferred item

l Part Number 2-0599148-3 (OM3 cable, 12 fibers, on 2 km reel) is not a preferred item

l Part Number 2-0599602-7 (OM2 cable, 36 fibers, on 2 km reel) is not a preferred item


4 Y-0599144-X

6 Y-0599145-X

8 Y-0599146-X

12 Y-0599148-X

16 Y-0599149-X

24 Y-1716029-X

36 Y-0599602-X

48 Y-0599603-X

-X Fiber category


Y- Reel size


Part Number Page Part Number Page Part Number Page Part Number Page0032054-000 67

1101013 64101021 47, 133101022 38106901 811116044 1351116571 1231116603 201116604 201206114 611206121 641206138 611206144 641206145 641206146 641206343 611206480 611206505 611206704 621206860 131124962-000 671278017 811278022 1241278023 1251278118 1241278328 681278346 1241278368 691278567 681278755 651278949 1241339015 351339188 201339189 201348876 631348960 61136816 29

1374416 921374463 691374484 1291374526 651374598 68, 751375013 121375014 121375015 121375055 201375092 1331375187 201375189 341375190 201375191 201375192 201375193 201375308 1221375309 1221375310 1221375317 1231375345 1341375351 1351375352 1351375353 1351375354 1351375355 1351375356 1341375357 1341375358 1351378531 1271379156 481391089 1311394060 141394573 381394574 381394575 381394576 381394580 461394581 461394582 46

1394583 461394763 461418730 621418731 621418732 621418733 621418734 621418735 621418770 641418800 641435129 651435130 651435954 141435965 161435971 161457628 1291457630 1291479002 1351479003 1351479154 131479155 131479451 16, 331479452 161479459 161479506 691479552 341479561 211479562 351479563 211479564 351479565 211479566 351479591 21, 351479592 26, 511479599 211479600 351479601 261479602 261479603 511479604 51

1479698 681479717 341479861 211499101 281499102 281499418 111499447 101499448 101499449 291499450 291499515 171499516 171499520 171499521 171536663 621537480 871568757 901583236 1221583608 1221588172 751588175 1261588176 1261588756 1291644016 451644042 301644076 251644077 511644097 471671000 611671002 611671003 621671017 611671044 641671054 641671055 631671082 631671114 631671116 661671117 661671118 66


Ind

ex

Part Number Index

139

Part Number Page1671121 621671128 321671130 621671136 15, 311671143 16, 331671146 691671157 15, 311671158 15, 311671163 32, 391671168 691671183 15, 311671186 651671187 15, 311671195 681671196 681671197 681671200 681671201 681671202 681671214 23, 371671215 23, 371671216 231671217 231671218 231671219 371671220 371671221 371671222 371671223 371671224 371671260 611671262 611671263 611671265 611671266 611671268 611671269 611671271 611671272 611671273 641671274 641671281 671673956 1221675188 341697590 811711000 451711001 451711003 281711004 281711005 281711006 111711007 281711008 281711027 261711028 25

Part Number Page1711034 251711035 251711038 251711040 261711043 101711053 101711076 501711077 501711078 501711079 501711088 361711091 251711093 251711094 251711095 251711096 251711100 441711125 431711130 431711135 431711140 431711147 121711148 12, 15, 30, 311711160 341711163 281711166 101711187 471711188 411711195 281711213 141711214 141711284 131711295 341711303 1231711336 401711339 451711342 341711343 341711357 361711358 221711359 481711409 401711420 521711437 341711441 341711450 441711474 361711481 341711488 481711494 111711495 111711496 111711500 1221711501 341711511 34

Part Number Page1711543 391711544 12, 301711554 22, 36, 481711563 501711564 501711579 521711580 501711609 401711613 491711618 491711623 491711624 491711637 491711658 341711659 491711666 521711685 15, 311711742 311711749 311711758 331711774 331716000 571716001 581716029 561725080 1221725150 1221754074 1291754136 1261754137 1261754138 1251754371 861754462 1271754603 1271754708 1271754765 1281754766 1281754767 1281754768 1281754845 1241754846 1241754847 1241777029 161777041 161777042 161777052 161777053 161777082 331777086 331777098 331777105 33182398-000 671828352 1321828353 1321828618 911828619 91

Part Number Page1828740 911828833 1281828836 1281828837 1281828935 911828936 91183553 44183578 45183635 42183636 42183641 42183931 871871456 241871696 83, 1261899183 1271918177 911918266 791918267 791918372 791918373 791918374 791918375 791918376 791918377 791918384 791918385 791918388 791918802 1321918803 1321918804 1321918805 1321918806 1321918807 1321918808 1321918809 1321918810 1321918811 1321920033 741920112 751920209 741920346 751920347 751920348 751920349 751920350 751920351 751920352 751920353 751920354 751920355 751920356 751920357 751920698 711920738 751920739 70

Ind

ex


Part Number IndexPart Number Page

1920740 701920741 721920742 721920743 721920753 711939121 24

22055102 752055103 752055104 752055107 712055108 722055109 722055110 722055158 732055161 732055162 732055163 732064431 1262064499 1322064500 1322064501 132219413 29219420 29219484 29219584 10219585 10228433 129231666 123233069 131284584 42, 45

3321442-000 67336455 39336488 49336526 15, 31336539 36336547 123336548 41336549 41336553 41336554 41336556 40336627 46336647 13336653 12336671 30336675 36336695 13336707 64336709 64336711 64336714 64

Part Number Page336720 64336721 64346925 51377602-000 67

4406222-000 67406330 13406331 13406372 21406375 21406390 13434376 131449526-000 122492025 126492026 126492109 127492543 125492622 126492623 126492697 124492703 125492783 126

5501014 127501195 129501197 129501198 127501258 127501381 80501473 129501523 129501818 129501858 129502129 129502134 129502222 129502259 129502282 129502418 129502631 129502656 129502748 129502750 80503330 125503337 129503577 83503605 83, 126503676 78503677 78503681 83503705 125503706 125503746 127

Part Number Page503787 129503901 83503910 126503911 126503957 125504021 80504035 129504064 128504290 1285065543 1275233582 925349561 905349565 905349567 905349568 925349569 925349574 905349578 905349580 905349582 925349584 92536788-000 675403304 1295492123 785492642 865492643 865502580 785502632 815502776 815502780 805503137 805503613 785503692 855503693 855503902 855503948 785504000 855504034 855504600 855504614 815504640 815504646 785504655 785504657 785504663 805504932 78555050 21555052 21555605 45555614 45555644 44555681 45556609 39558176 133558198 133

Part Number Page558199 133558401 18558402 18558417 135558635 19558637 19558821 133558839 18558840 18559066 83559087 83559496 65559501 65559515 68559542 63559557 68559558 69559596 69559601 69569523 26569524 26569526 26569527 26569528 26569669 26569685 26569854 19569856 19569857 19569858 19569949 12357535 1057538 1057893 2858424 12658433 126599142 55599144 56599145 56599146 56599149 56599152 57599153 57599154 57599156 57599157 57599159 57599160 57599161 57599162 57599164 57599165 57599167 57599168 59599169 59


Ind

ex

Part Number Index

141

Part Number Page599170 59599172 59599173 59599175 59599192 55599602 56599603 56599605 57599606 57599607 57599609 57599610 57599611 57599612 59599613 59599614 58599615 58599616 58599617 58599618 58599619 58599620 58599621 58599622 58599623 58599624 58599625 58599626 58599627 58599628 58599629 58599681 60599682 60599683 60599690 60599692 60

66206158 906206613 896206615 896206616 896206617 896206619 896206620 896206621 896206820 916206821 916278049 816278079 866278082 866278303 776278414 766278415 766278807 77

Part Number Page6278808 776278810 766278811 766348260 906348269 916348271 916348522 856348941 926348942 926374208 776374906 816391366 926391905 756391906 756391907 756391908 756391920 746391922 746391924 746391926 746391928 746391930 746391931 746391932 746391934 746391936 746391938 746391940 746391942 746391953 756391954 756391956 756391957 756391958 756391961 726391978 736391979 736391980 736391981 736391982 736391983 736456463 896457567 816536444 916536445 916536446 916536447 916536462 896536464 906536501 916536502 916536503 916536508 906536509 906536510 90

Part Number Page6536511 896536512 896536513 896536556 926536769 916536770 916536803 916536810 916536811 916536880 926536966 926536967 906536968 896536969 916536974 926536975 92657054-000 676588291 866588878 776588880 776693276 866693949 776693951 776695121 906695133 746695195 756695240 1316695241 1316695242 1316695243 1316695244 1316695245 1316695313 916695459 756695460 756695461 756695462 756695463 756695464 756695471 736695505 926695506 926695507 926695508 926695509 926695510 926695511 926695512 926695657 906695697 906754252 766754482 866754483 866920014 73

Part Number Page7726948 123

8861528-000 67887646-000 67

9909090-000 67941761 25959236 51959237 51959238 51959239 51959240 51959305 51959306 51959307 51959308 51959309 51959385 50966105 22966106 22966474 87966936 87969556 20, 35969614 62969615 62969616 62969617 62969618 62969619 62969628 62969629 62969630 62969631 62969704 133969732 87969733 87969986 64969993 62969994 62969999 87

CCB8019-000 84CB8020-000 84

DD24193-000 67

EE41188-000 38

Ind

ex


Wiring Diagrams

T568A Wiring

P A I R

1 2 3 4 5 6 7 8

P A I R

1 2 3 4 5 6 7 8

P A I RP A I R P A I R

1 2 3 4 5 6 7 8

P A I R

P A I R P A I R

1 2 3 4 5 6 7 8

P A I R P A I R

10/100BASE-TTokenRing1000BASE-T 155 Mbps ATM/

TP-PMD

P A I R

1 2 3 4 5 6 7 8

P A I R

1 2 3 4 5 6 7 8


1 2 3 4 5 6 7 8

P A I R

P A I R P A I R

1 2 3 4 5 6 7 8

P A I R P A I R


TP-PMD

P A I R

1 2 3 4 5 6 7 8

P A I R

1 2 3 4 5 6 7 8


1 2 3 4 5 6 7 8

P A I R

P A I R P A I R

1 2 3 4 5 6 7 8

P A I R P A I R


TP-PMD

P A I R

1 2 3 4 5 6 7 8

P A I R

1 2 3 4 5 6 7 8


1 2 3 4 5 6 7 8

P A I R

P A I R P A I R

1 2 3 4 5 6 7 8

P A I R P A I R


TP-PMD

TipRing

TipRing

Note: All of the applications listed above (as well as most other communications applications) can be implemented onboth T568A and T568B jacks.

T568B Wiring

l 10Base-Tl 100Base-TX

l Token Ringl ISDN, xDSL

l ATM/TP-PMDl 1000Base-TX2

l 1000Base-Tl 10GBase-T

Wiring Diagrams for Modular Plugs and Jacks

Application Wiring Diagrams for Modular Jacks

Restriction on the Use of Hazardous Substances

At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where required in the process of eliminating the restricted materials. All part numbers in this catalog are RoHS Compliant. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006.

NOTE: For purposes of this catalog, included within the definition of RoHS Compliant are:l Products that are clearly “Out of Scope” of the RoHS Directive such as hand tools and other non-electrical accessories.l Products that contain lead in solderable interfaces (they do not contain any of the other five restricted substances

above allowable limits). However, these products are covered by an application-based exception for lead in solders,such as the server, storage, or networking infrastructure exemption of the same directive.

NOTE: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change.


Ind

ex

Reliable Performance

143

XG 10 Gb/s Approved

Pyramid Tested

RoHS Ready

Ensured Performance

RoHSReady

Optimized Physical Contact (OPC) enhances your link parameters

Why do you require a controlled ferrule end face? Enhanced services such as Gigabit and 10 Gigabit Ethernet require a high quality cabling system. Therefore, IEC 60874-19-1 specifies the dimensional details of SC connectors in order to ensure intermatability and performance within an ISO 11801 specified application. These dimensional requirements are directly related to the endface characteristics of a polished ferrule, namely its Radius, Dome Offset and Fiber Position.

If these ferrule characteristics are optimal an Optimized Physical Contact (OPC)between the two connectors is guaranteed. This will enhance data transmission parameters like Optical Performance, Attenuation, Return Loss and Data Link Stability.

Also, the optical intermatability between connectors of different suppliers can be ensured by controlled endfaces. As a result of OPC a stable physical contact between the endfaces is achieved. This provides a very low Insertion Loss as well as a high Return Loss in order to run high speed applications like Gigabit or 10 Gigabit Ethernet.All Products in this catalog that feature the ensured Performance logo provide OPC at all time. AMP NETCONNECT guarantees a controlled endface for all OM3 assemblies and field installable products (MT-RJ and LightCrimpPlus).

The Conformity and Quality Trademark for Real Cat. 6 Component Performance

All products in this catalog that feature the PYRAMID TESTED logo totally comply with the de-embedded testing requirements of the standards TIA / EIA 568 B.2-1 (UTP & STP), IEC 60603-7-4 (UTP) and IEC 60603-7-5 (STP). Accordingly these products fulfill the performance requirements of Cat. 6 for components which guarantees interoperability and backward-compatibility between products.

During development and production these products are tested with a worldwide standardized test setup, heart piece of which is a pyramidal test head. This exactly defined shape guarantees repeatability of the results. Most significant advantage for end-users is a wide range of system- and vendor-independent patch cords suitable to reach Cat. 6.

High Speed 10 Gigabit Ethernet over Twisted Pair and Fiber Optic Cabling

The XG 10 GB/S approved logo marks all products of the XG family. No matter whether copper or fiber – AMP NETCONNECT solutions are complete end-to-end systems for all cabling media. The XG Copper System complies to the 10 Gb/s standard IEEE 802.3an. The system’s outstanding AlienNEXT suppression is tested and certified by the independant delta labs in Denmark.

This guarantees 10GBase-T performance over 100 m link length. The acknowledged XG Fiber System has proven its performance and reliability in the market for several years. The system includes a LC connector for quick termination.

RussiaTyco Electronics Mishina Ulica 56/2125083 MoscowPhone: +7-495-790-79-02Fax: +7-495-721-18-94

Ind

ex


Imprint

Czech Rep.Tyco Electronics K AMP 129366434 KurimPhone: +420-541-162-112Fax: +420-541-162-132

NetherlandsTyco Electronics Rietveldenweg 325222 AR ’s-HertogenboschPhone: +31-73-6246-211Fax: +31-73-6246-958

HungaryTyco Electronics Grassalkovich ut. 2551239 BudapestPhone: +36-1-289-1007Fax: +36-1-289-1010

IndiaTyco Electronics Mobius Tower 1, Hoody Village560037 BangalorePhone: +91-80-4011-5000Fax: +91-80-4011-5030

BelgiumTyco Electronics Diestsesteenweg 6923010 Kessel-LoPhone: +32-16-352-300Fax: +32-16-352-353

SwedenTyco Electronics Box 619, Kanalvågen 10 c19426 Upplands-VåsbyPhone: +46-8-5072-5000Fax: +46-8-5072-5001

DenmarkTyco Electronics Naverland 82600 GlostrupPhone: +45-70-15-52-00Fax: +45-43-44-14-14

U.A.E. Tyco Electronics DNIR Building, Sheikh Zayed RoadDubai Phone: +971-4-3210201 Fax: +971-4-3216300

TurkeyTyco Electronics Yapi Kredi Plaza B/1034330 Levent-IstanbulPhone: +90-212-281-8181Fax: +90-212-281-8184

EgyptTyco Electronics 38, El Thawra Str., Ard EL-Golf11341 Heliopolis, CairoPhone: +20-2-2419-2334Fax: +20-2-2417-7647

FinlandTyco Electronics Konalantie 47 F (PL 100)00390 HelsinkiPhone: +358-95-12-34-20Fax: +358-95-12-34-250

FranceTyco Electronics Chaussée Jules César, 2995301 Cergy Pontoise CedexPhone: +33-1-3420-2122Fax: +33-1-3420-2268

Unit. Kingdom Tyco Electronics Merrion Avenue HA7 4 RS Stanmore/MiddlesexPhone: +44-208-420-8140Fax: +44-208-954-7467

ItalyTyco Electronics Corso Fratelli Cervi 1510093 Colegno (Torino)Phone: +39-011-4012-111Fax: +39-011-4012-268

KazakhstanTyco Electronics 17, Nauryzbay Batyr Str.,Off. 215050004 AlmatyPhone: +7-727-244-5874Fax: +7-727-244-5877

LituaniaTyco Electronics Smolensko Str. 603201 VilniusPhone: +370-5-213-1402Fax: +370-5-213-1403

PortugalTyco Electronics Estrada de Almeirim7002-552 EvoraPhone: +351-961-377-331Fax: +351-211-454-506

RomaniaTyco Electronics 39, Calea Floreasca, 2nd floor014453 BucharestPhone: +40-21-311-3479Fax: +40-21-311-0574

Greece Tyco Electronics 223A Sygrou Ave. 17122 Nea Smyrni, AthensPhone: +30-210-9370396/7Fax: +30-210-9370655

GermanyTyco Electronics AMPèrestraße 7–1163225 LangenPhone: +49-6103-709-1547Fax: +49-6103-709-1219

NorwayTyco Electronics P.O.Box 74, Holmengata 241378 NesbruPhone: +47-66-77-88-99Fax: +47-66-77-88-55

SwitzerlandTyco Electronics AMPèrestrasse 39323 SteinachPhone: +41-71-447-0447Fax: +41-71-447-0423

PolandTyco Electronics Ul. Postepu 202-676 WarszawaPhone: +48-22-4576-700Fax: +48-22-4576-720

SpainTyco Electronics Muntaner, 24908021 BarcelonaPhone: +34-93-291-0330Fax: +34-93-291-0608

UkraineTyco Electronics 13, Pimonenko Str., 7A, Off.1104050 KievPhone: +380-44-206-2265Fax: +380-44-206-2264

AustriaTyco Electronics Pilzgasse 331210 WienPhone: +43-1-90560-1204Fax: +43-1-90560-1270

BulgariaTyco Electronics 36. Dragan Tsantkov Blvd.WTC, Off. B207, 1040 SofiaPhone: +359-2-971-2152Fax: +359-2-971-2153

Tyco ElectronicsAMP NETCONNECT

EMEA Product CatalogBuilding Networks

Revision: February 2009

The product portfolio shown in this catalog contains the most important AMP NETCONNECT cabling system components forthe EMEA region. However, not every available product or product type can be displayed. In case of requests regarding productsnot shown or for any other question please contact one of the following TE AMP NETCONNECT Country Sales Offices:

While Tyco Electronics and its affiliates referenced herein have made every reasonable effort to ensure the accuracy of the information in this catalog,Tyco Electronics does not guarantee that it is error free, nor does Tyco Electronics make any other representation, warranty or guarantee that the infor-mation is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at anytime without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to,any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those in the Tyco Electronics StandardTerms and Conditons of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect or consequential damages arising from thesale, resale or misuse of its products. Users should independently evaluate the suitability of, and test each product for, their application.

AMP, AMP CO, AMP NETCONNECT, AMPTRAC, AMP-TWIST, CORELINK, Dualan, Easistrip, EtherSeal, FIST, FibrBoss, FSD, LightCrimp, MPOptimate,MRJ21, NETCONNECT, PRO-CRIMPER, RECORDsplice, RSD, SMOUV, TYCO ELECTRONICS and TE Logo are trademarks.Other product or brand names as well as logos and company names mentioned in this catalog may be trademarks of their respective owners.

Twenty-five years from now, you’ll thank us.

It’s Standard Equipment

This coverage is automatically part of the pack-

age when you specify AMP NETCONNECT pro-

ducts end-to-end and when a Tyco Electronics-

authorized NETCONNECT Design & Installation

(ND&I) contractor registers the network design

with Tyco Electronics and performs the actual in-

stallation in accordance with AMP NETCONNECT

requirements.

Who’s Covered

Unlike most system suppliers, Tyco Electronics

provideswarrantycoveragedirectly totheenduser.

Many suppliers provide coverage to the installers,

who then provide coverage to the customers.

But with the Tyco Electronics warranties, there are

no middlemen. The warranties are between you

and Tyco Electronics.

Which means if something goes wrong, we’ll fix it.

Some conditions may apply. For more information

contact your local AMP NETCONNECT sales office

(see backpage of this catalog for Phone and Fax).

We are confident that your AMP NETCONNECT

system will keep performing to current industry

standards. If ever it does not meet those stan-

dards within 25 years of the date of installation,

we’ll provide the reasonable parts and labor

to replace or repair the AMP NETCONNECT

product.

l 25 years coverage on system performance

l 25 years coverage on components

l 25 years coverage on applications

l Based on industry standards

l Includes parts and labor

l Tyco Electronics provides coverage directly

to the end user— if something is wrong,

Tyco Electronics will make it right

1308799-4–18M–DE–02/09 © 2009 – Tyco Electronics AMP GmbH – All rights reservedAMP NETCONNECT, Tyco Electronics and TE Logo are trademarks. http://www.ampnetconnect.euOther products, logos, and names mentioned herein may be trademarks of their respective owners.

North AmericaGreensboro, NC, USAPh: +1-800-553-0938Fx: +1-717-986-7406

Latin AmericaBuenos Aires, Argentina Ph: +54-11-4733-2200Fx: +54-11-4733-2282

EuropeKessel-Lo, BelgiumPh: +32-16-35-2190Fx: +32-16-35-2188

Mid East & AfricaCergy-Pontoise, FrancePh: +33-1-3420-2122Fx: +33-1-3420-2268

AsiaHong Kong, ChinaPh: +852-2735-1628Fx: +852-2735-1625

PacificSydney, AustraliaPh: +61-2-9554-2600Fx: +61-2-9554-2519

TE AMP NETCONNECT Regional Sales Headquarters:

Austria – ViennaPh: +43-1-90560-1204Fx: +43-1-90560-1270

Belgium – Kessel-LoPh: +32-16-35-2190Fx: +32-16-35-2188

Bulgaria – SofiaPh: +359-2-971-2152Fx: +359-2-971-2153

Czech&Slovak Rep.–KurimPh: +420-541-162-112Fx: +420-541-162-223

Denmark – GlostrupPh: +45-70-15-52-00Fx: +45-43-44-14-14

Egypt – CairoPh: +20-2-2419-2334Fx: +20-2-2417-7647

Finland – HelsinkiPh: +358-95-12-34-20Fx: +358-95-12-34-250

France – Cergy-Pontoise Ph: +33-1-3420-2122Fx: +33-1-3420-2268

Germany – LangenPh: +49-6103-709-1547Fx: +49-6103-709-1219

Greece/Cyprus – AthensPh: +30-210-9370-396Fx: +30-210-9370-655

Hungary – BudapestPh: +36-1-289-1007Fx: +36-1-289-1010

India – BangalorePh: +91-80-4011-5000Fx: +91-80-4011-5030

Italy – Collegno (Torino)Ph: +39-011-4012-111Fx: +39-011-4012-268

Kazakhstan – AlmatyPh: +7-727-244-5874Fx: +7-727-244-5877

Lithuania – VilniusPh: +370-5-213-1402Fx: +370-5-213-1403

Netherlands –Den BoschPh: +31-73-6246-246Fx: +31-73-6246-958

Norway – NesbruPh: +47-66-77-88-99Fx: +47-66-77-88-55

Poland – WarsawPh: +48-22-4576-700Fx: +48-22-4576-720

Portugal – EvoraPh: +351-961-377-331Fx: +351-211-454-506

Romania – BucharestPh: +40-21-311-3479Fx: +40-21-312-0574

Russia – MoscowPh: +7-495-790-79-02Fx: +7-495-721-18-94

Spain – BarcelonaPh: +34-93-291-0330Fx: +34-93-291-0608

Sweden–UpplandsVäsbyPh: +46-8-5072-5000Fx: +46-8-5072-5001

Switzerland – SteinachPh: +41-71-447-0-447Fx: +41-71-447-0-423

Turkey – IstanbulPh: +90-212-281-8181Fx: +90-212-281-8184

UK – Stanmore, MiddxPh: +44-208-420-8140Fx: +44-208-954-7467

Ukraine – KievPh: +380-44-206-2265Fx: +380-44-206-2264

U.A.E. – DubaiPh: +971-4-321-0201Fx: +971-4-321-6300

TE AMP NETCONNECT in Europe, Middle East, Africa and India:

Documents

Amp Net Connect Emea Catalog 2009