Magnetic Amplifier for switch mode power supply Power supply for personal computer Open-frame switched-mode power suppliers Precise output voltage control such as 3.3V, 5.0V,12V Other kinds of saturable reactor

High squareness( ~ 98%) Low coercive force field Low temperature rise High efficiency Low reset current requirement

Low loss which improve the efficiency of a switch-mode power supply Very low saturated inductance Reduction of ripple noise and ringing Simplifies design of noise suppression circuit

Softening the reverse recovery phenomena in noise suppression Protection diode from being broken by spike voltage Ringing suppression in switch-mode power supplies Limit semiconductor rectifier reverse recovery current in

continuous mode converter Motor controller circuit used for MOSFET and/or bipolar transistor, BJT Ringing protection for MOSFET gate trigger Battery Charger for switch-mode power suppliers AC Adapter for switch-mode power supplies Spike noise protection for MOSFET bridge circuit

AMOGREENTECH Co., Ltd. SALES & MARKETING185-1, Sucham-ri, Tongjin-eup, Gimpo-shi, Kyonggi-do 415-863, Korea TEL: 82-31-981-0723 FAX: 82-31-989-7723(ext.351) URL: http://www.amocore.co.kr E-mail: dklee@amogreentech.co.kr

wwwwww..aammooccoorree..ccoo..kkrr

High saturation flux density of 1.2T Smaller component size High precision regulation Extended operating temperature range up to 120°°C

MMaagg--AAmmpp CChhookkee

NNooiissee SSuupppprreessssiioonn && SSppiikkee KKiilllleerr CChhookkee

Amorphous Magnetic Components & Applications

Advanced Powder Choke Common Mode Choke for EMI Solution Cut & Laminated Choke for High Power Application Noise Suppression & Spike Killer Choke Mag-Amp Choke Current Transformer

AAMMOOGGRREEEENNTTEECCHH produces key, advanced material - based components for Smart Grid & Energy savings

Features of Co-based Mag-Amp Choke

Features of Nanocrystalline Mag-Amp Choke

Applications

Features

Applications

High permeability Reduce in size Reduce the winding turns Low DC resistance Low core loss Low power consumption High impedance overall the wide-range of frequency Meet the EN 500081 and EN 500082 standards Getting a suitable insertion loss in wide-range of frequency Low profile (1 ~ 5 mm height)

Typical B-H loop and it’s incremental permeability at 10 kHz

CCoommmmoonn MMooddee CChhookkee

Features

EMI common mode filtering Telecommunications and data

communications interface transformers High accuracy current transformers High accuracy pulse transformers Ground fault protection devices

Applications

Characteristics

Part No.Finished Choke (mm) Leff Aeff Veff AL

OD ID HT (mm) (mm2) (mm3) (µH)

AMFN-16A-TH 17.8 8.3 8.1 40.8 14.4 588 41.4AMFN-20A-TH 22.5 10.4 10.1 50.1 23.4 1195 57.0AMFN-24A-TH 27.7 17.3 12.9 70.6 20.0 1414 28.4AMFN-25A-TH 27.7 17.3 12.9 70.6 20.0 1414 10.6AMFN-25S-TH 27.7 13.8 12.4 63.4 36.0 2282 67.0AMFN-32S-TH 32.7 17.8 12.4 78.5 40.0 3142 66.0AMFN-40S-TH 40.9 23.2 15.5 100.5 57.6 5789 74.0AMFN-40A-TH 42.9 28.8 18.2 113.0 48.0 5424 52.5AMFN-45S-TH 47.9 22.1 23.1 109.9 150.0 16485 127.0AMFN-50S-TH 53.8 36.2 23.9 141.3 80.0 11304 45.3AMFN-60S-TH 64.0 41.0 24.5 164.9 120.0 19788 68.5AMFN-63A-TH 66.7 46.3 28.8 177.4 130.0 23062 64.5AMFN-100S-TH 104.0 76.0 24.5 282.6 160.0 45216 47.5

Standard Choke Dimensions & Specifications

Amorphous카다로그최종_100603 2010.6.3 3:36 PM 페이지1

Reduce overall component cost than other solution Low ripple current High efficiency Smaller in size(Save PCB size) Smallest temperature rise among powdered choke

PFC chokes for PC power supplies PFC chokes for Server/Workstation power supplies PFC chokes for Industrial PC PFC chokes for LCD/PDP TV power supplies Output chokes for General Industrial power supplies

Low eddy current Losses Low Hysteresis Losses Using for high efficiency application Low temperature rise Smaller component size and mass High saturation flux density using by ultra thin ribbon

Telecom and Industrial Rectifier Un-interruptible Power Supply Choke for Solar Power Inverter Choke for Frequency Converter PFC Choke for Industrial Power Supply Output Choke for Power Supply PFC Choke for Welding Machine High power Choke for Hybrid Vehicle Choke for Fuel Cell Application

Electronic Watthour Meters UPS, AVR and DPR Motor, Heater controlling system

Minimal phase angle error High permeability and Very low losses Less sensitive to low interference fields Having long-term stability due to the controlled

magnetic function Excellent coupling of primary and secondary currents

PCB Mount type Lead-wire typeHigh Flux vs.Low LossLow Temp Rise

Sendust vs.High DCBBig Current &

Low Temp Rise

MPP vs.High DCB &

Low Temp RiseBig Current &

Cost Saving

APH

Material Property Comparison Benefit of Advanced Powder ChokeProperty APHTM High Flux MPP Sendust

Saturation Flux 15,000 15,000 7,500 10,000Density, Bs(Gauss)

Core Loss Low High Lowest Medium@100kHz, 0.1T (600mW/cm3)

Perm. vs DC Bias Better Best Good Medium@100Oe (75%)

Relative Cost Medium High Highest Low

Composition Fe-Si-B Fe-Ni Fe-Ni-Mo Fe-Al-Si

Advanced Powder Choke Permeability

Permeabilities : 26, 60, 75, 90μSizes (OD) : 13, 17, 18, 20, 23, 24, 27,

33, 36, 40, 46, 47, 50, 57mm

APH XX P XX

Size of Choke Perm. Value

Note: The properties are typical value measured(60μ)Type of DC-tolerance:D = with DC-tolerance,T = without DC-tolerance, Z = zero-phase current

transformer

ASX - XXX X

Rated current in Ampere(rms): 040 = measures up to 40 Amperes in rms current(typical)

Terminal structure:L = Lead typeP = Pin type

AAddvvaanncceedd PPoowwddeerr CChhookkee ffoorr HHiigghh CCuurrrreenntt PPFFCC//OOuutt PPuutt CChhookkee AApppplliiccaattiioonn

CCuutt && LLaammiinnaatteedd CChhookkee ffoorr HHiigghh PPoowweerr AApppplliiccaattiioonn

CCuurrrreenntt TTrraannssffoorrmmeerrffoorr HHiigghh--AAccccuurraaccyy oonn EElleeccttrroonniicc WWaatttt HHoouurr MMeetteerr

Features

Applications

Structure

Specifications

Features

Applications

Material Information

Specifications

Features

Applications

Structure

Specifications

APHTM Size(Coated) AL(nH/N2) Le Ac Vol(OD×ID×HT) 60µ 75µ 90µ (cm) (cm2) (cm3)

APH13PXX 13.5×7.0×5.5 27 34 40 3.12 0.11 0.36APH17PXX 17.4×9.5×7.1 35 43 52 4.11 0.19 0.79APH18PXX 18.0×9.0×7.1 43 53 64 4.14 0.23 0.96APH20PXX 21.1×12.1×7.1 32 41 49 5.09 0.23 1.15APH23PXX 23.6×13.4×8.4 43 54 65 5.67 0.33 1.88APH24PXX 24.3×13.8×9.7 51 63 76 5.88 0.39 2.28APH27PXX 27.7×14.1×12.0 75 94 113 6.35 0.65 4.15APH33PXX 33.8×19.3×11.6 61 76 - 8.15 0.67 5.48APH36PXX 36.7×21.5×11.3 56 70 - 8.98 0.68 6.09APH40PXX 40.7×23.3×15.4 81 101 - 9.84 1.07 10.55APH46PXX 47.6×23.3×18.9 135 169 - 10.74 1.99 21.37APH57PXX 58.0×25.6×16.1 138 172 - 12.51 2.29 28.60

Part Number A B C D E F M Lm Ac Wa

(g) (cm) (cm2) (cm2)

AMCU-4 9 10 33 15 29 51 95 11.5 1.0 3.4

AMCU-6.3B 9.9 9.7 33 20 29.5 53 145 12.9 1.6 3.2AMCU-10 11 13 40 20 35 62 200 15.4 1.8 5.2

AMCU-16A 11 13 40 25 35 62 250 15.1 2.3 5.2AMCU-32 13 15 56 30 41 82 460 20.0 3.2 8.4AMCU-40 13 15 56 35 41 82 530 19.9 3.7 8.4AMCU-50 16 20 70 25 52 102 590 24.9 3.3 14.0AMCU-80 16 20 70 40 52 102 950 25.4 5.2 14.0AMCU-100 16 20 70 45 52 102 1060 25.0 5.9 14.0AMCU-200 19 25 83 50 63 121 1670 29.8 7.8 20.8AMCU-500 25 40 85 55 90 135 2900 35.6 11.3 34.0

AMCU-800B 30 40 95 85 100 135 5930 39.3 21.0 38.0AMCU-1000 33 40 105 85 106 171 7060 42.7 23.0 42.0

Primary Current Range Turns Ratio Errors Characteristics DimensionsPart Number IN IDC,MAX Phase L RCu RB ФФ Width×Height

(P/N) (Arms) (AOP) 1: ФФ(°°) (H) (ΩΩ) (ΩΩ) (mm) (mm×mm)

AST-005P/L 5 - 2500 0.30 183 152 150 5.8 24.5×11.1AST-005PA/LA 5 - 2500 0.38 183 110 150 7.5 23.2×10.8

AST-006P 6 - 2000 0.25 156 114 30 6.3 24.5×11.5AST-012P* 6 - 1500 0.64 43 75 75 4.8 22.7×12.0AST-040P/L 40 - 2500 0.17 183 152 18.75 5.8 24.5×11.1

AST-040PA/LA 40 - 2500 0.25 183 110 18.75 7.5 23.2×10.8AST-060P 60 - 2500 0.10 134 61 12.5 ≥7.7 31.1×15.3

AST-080P/L 80 - 2500 0.14 226 160 9.375 ≥8.9 26.1×17.1AST-120L 120 - 2500 0.10 180 68 6.25 12.2 39.0×17.6

ASDL-060L 60 60 2500 4.55 3.02 63 12.5 ≥8.0 30.5×15.0ASDL-060P 60 60 2500 4.55 3.02 63 12.5 ≥7.7 31.1×15.3ASDL-100L 100 100 2500 4.42 2.53 54 7.5 ≥9.5 35.0×15.0ASDL-120L 120 120 2500 4.21 2.00 40 6.25 ≥14.0 39.0×17.5ASM-120LS 120 120 2500 0.11 133 90 6.25 ≥12.5 37.7×16.0

Remarks1) Below data is measured under 50Hz operating frequency2) AST-Series without DC-Tolerance according to IEC 62053-22 and

ANSI C12.xx3) ASDL-Series with DC-Tolerance according to IEC 62053-21,23

Amorphous카다로그최종_100603 2010.6.3 3:36 PM 페이지2

Reduce overall component cost than other solution Low ripple current High efficiency Smaller in size(Save PCB size) Smallest temperature rise among powdered choke

PFC chokes for PC power supplies PFC chokes for Server/Workstation power supplies PFC chokes for Industrial PC PFC chokes for LCD/PDP TV power supplies Output chokes for General Industrial power supplies

Low eddy current Losses Low Hysteresis Losses Using for high efficiency application Low temperature rise Smaller component size and mass High saturation flux density using by ultra thin ribbon

Telecom and Industrial Rectifier Un-interruptible Power Supply Choke for Solar Power Inverter Choke for Frequency Converter PFC Choke for Industrial Power Supply Output Choke for Power Supply PFC Choke for Welding Machine High power Choke for Hybrid Vehicle Choke for Fuel Cell Application

Electronic Watthour Meters UPS, AVR and DPR Motor, Heater controlling system

Minimal phase angle error High permeability and Very low losses Less sensitive to low interference fields Having long-term stability due to the controlled

magnetic function Excellent coupling of primary and secondary currents

PCB Mount type Lead-wire typeHigh Flux vs.Low LossLow Temp Rise

Sendust vs.High DCBBig Current &

Low Temp Rise

MPP vs.High DCB &

Low Temp RiseBig Current &

Cost Saving

APH

Material Property Comparison Benefit of Advanced Powder ChokeProperty APHTM High Flux MPP Sendust

Saturation Flux 15,000 15,000 7,500 10,000Density, Bs(Gauss)

Core Loss Low High Lowest Medium@100kHz, 0.1T (600mW/cm3)

Perm. vs DC Bias Better Best Good Medium@100Oe (75%)

Relative Cost Medium High Highest Low

Composition Fe-Si-B Fe-Ni Fe-Ni-Mo Fe-Al-Si

Advanced Powder Choke Permeability

Permeabilities : 26, 60, 75, 90μSizes (OD) : 13, 17, 18, 20, 23, 24, 27,

33, 36, 40, 46, 47, 50, 57mm

APH XX P XX

Size of Choke Perm. Value

Note: The properties are typical value measured(60μ)Type of DC-tolerance:D = with DC-tolerance,T = without DC-tolerance, Z = zero-phase current

transformer

ASX - XXX X

Rated current in Ampere(rms): 040 = measures up to 40 Amperes in rms current(typical)

Terminal structure:L = Lead typeP = Pin type

AAddvvaanncceedd PPoowwddeerr CChhookkee ffoorr HHiigghh CCuurrrreenntt PPFFCC//OOuutt PPuutt CChhookkee AApppplliiccaattiioonn

CCuutt && LLaammiinnaatteedd CChhookkee ffoorr HHiigghh PPoowweerr AApppplliiccaattiioonn

CCuurrrreenntt TTrraannssffoorrmmeerrffoorr HHiigghh--AAccccuurraaccyy oonn EElleeccttrroonniicc WWaatttt HHoouurr MMeetteerr

Features

Applications

Structure

Specifications

Features

Applications

Material Information

Specifications

Features

Applications

Structure

Specifications

APHTM Size(Coated) AL(nH/N2) Le Ac Vol(OD×ID×HT) 60µ 75µ 90µ (cm) (cm2) (cm3)

APH13PXX 13.5×7.0×5.5 27 34 40 3.12 0.11 0.36APH17PXX 17.4×9.5×7.1 35 43 52 4.11 0.19 0.79APH18PXX 18.0×9.0×7.1 43 53 64 4.14 0.23 0.96APH20PXX 21.1×12.1×7.1 32 41 49 5.09 0.23 1.15APH23PXX 23.6×13.4×8.4 43 54 65 5.67 0.33 1.88APH24PXX 24.3×13.8×9.7 51 63 76 5.88 0.39 2.28APH27PXX 27.7×14.1×12.0 75 94 113 6.35 0.65 4.15APH33PXX 33.8×19.3×11.6 61 76 - 8.15 0.67 5.48APH36PXX 36.7×21.5×11.3 56 70 - 8.98 0.68 6.09APH40PXX 40.7×23.3×15.4 81 101 - 9.84 1.07 10.55APH46PXX 47.6×23.3×18.9 135 169 - 10.74 1.99 21.37APH57PXX 58.0×25.6×16.1 138 172 - 12.51 2.29 28.60

Part Number A B C D E F M Lm Ac Wa

(g) (cm) (cm2) (cm2)

AMCU-4 9 10 33 15 29 51 95 11.5 1.0 3.4

AMCU-6.3B 9.9 9.7 33 20 29.5 53 145 12.9 1.6 3.2AMCU-10 11 13 40 20 35 62 200 15.4 1.8 5.2

AMCU-16A 11 13 40 25 35 62 250 15.1 2.3 5.2AMCU-32 13 15 56 30 41 82 460 20.0 3.2 8.4AMCU-40 13 15 56 35 41 82 530 19.9 3.7 8.4AMCU-50 16 20 70 25 52 102 590 24.9 3.3 14.0AMCU-80 16 20 70 40 52 102 950 25.4 5.2 14.0AMCU-100 16 20 70 45 52 102 1060 25.0 5.9 14.0AMCU-200 19 25 83 50 63 121 1670 29.8 7.8 20.8AMCU-500 25 40 85 55 90 135 2900 35.6 11.3 34.0

AMCU-800B 30 40 95 85 100 135 5930 39.3 21.0 38.0AMCU-1000 33 40 105 85 106 171 7060 42.7 23.0 42.0

Primary Current Range Turns Ratio Errors Characteristics DimensionsPart Number IN IDC,MAX Phase L RCu RB ФФ Width×Height

(P/N) (Arms) (AOP) 1: ФФ(°°) (H) (ΩΩ) (ΩΩ) (mm) (mm×mm)

AST-005P/L 5 - 2500 0.30 183 152 150 5.8 24.5×11.1AST-005PA/LA 5 - 2500 0.38 183 110 150 7.5 23.2×10.8

AST-006P 6 - 2000 0.25 156 114 30 6.3 24.5×11.5AST-012P* 6 - 1500 0.64 43 75 75 4.8 22.7×12.0AST-040P/L 40 - 2500 0.17 183 152 18.75 5.8 24.5×11.1

AST-040PA/LA 40 - 2500 0.25 183 110 18.75 7.5 23.2×10.8AST-060P 60 - 2500 0.10 134 61 12.5 ≥7.7 31.1×15.3

AST-080P/L 80 - 2500 0.14 226 160 9.375 ≥8.9 26.1×17.1AST-120L 120 - 2500 0.10 180 68 6.25 12.2 39.0×17.6

ASDL-060L 60 60 2500 4.55 3.02 63 12.5 ≥8.0 30.5×15.0ASDL-060P 60 60 2500 4.55 3.02 63 12.5 ≥7.7 31.1×15.3ASDL-100L 100 100 2500 4.42 2.53 54 7.5 ≥9.5 35.0×15.0ASDL-120L 120 120 2500 4.21 2.00 40 6.25 ≥14.0 39.0×17.5ASM-120LS 120 120 2500 0.11 133 90 6.25 ≥12.5 37.7×16.0

Remarks1) Below data is measured under 50Hz operating frequency2) AST-Series without DC-Tolerance according to IEC 62053-22 and

ANSI C12.xx3) ASDL-Series with DC-Tolerance according to IEC 62053-21,23

Amorphous카다로그최종_100603 2010.6.3 3:36 PM 페이지2

Reduce overall component cost than other solution Low ripple current High efficiency Smaller in size(Save PCB size) Smallest temperature rise among powdered choke

PFC chokes for PC power supplies PFC chokes for Server/Workstation power supplies PFC chokes for Industrial PC PFC chokes for LCD/PDP TV power supplies Output chokes for General Industrial power supplies

Low eddy current Losses Low Hysteresis Losses Using for high efficiency application Low temperature rise Smaller component size and mass High saturation flux density using by ultra thin ribbon

Telecom and Industrial Rectifier Un-interruptible Power Supply Choke for Solar Power Inverter Choke for Frequency Converter PFC Choke for Industrial Power Supply Output Choke for Power Supply PFC Choke for Welding Machine High power Choke for Hybrid Vehicle Choke for Fuel Cell Application

Electronic Watthour Meters UPS, AVR and DPR Motor, Heater controlling system

Minimal phase angle error High permeability and Very low losses Less sensitive to low interference fields Having long-term stability due to the controlled

magnetic function Excellent coupling of primary and secondary currents

PCB Mount type Lead-wire typeHigh Flux vs.Low LossLow Temp Rise

Sendust vs.High DCBBig Current &

Low Temp Rise

MPP vs.High DCB &

Low Temp RiseBig Current &

Cost Saving

APH

Material Property Comparison Benefit of Advanced Powder ChokeProperty APHTM High Flux MPP Sendust

Saturation Flux 15,000 15,000 7,500 10,000Density, Bs(Gauss)

Core Loss Low High Lowest Medium@100kHz, 0.1T (600mW/cm3)

Perm. vs DC Bias Better Best Good Medium@100Oe (75%)

Relative Cost Medium High Highest Low

Composition Fe-Si-B Fe-Ni Fe-Ni-Mo Fe-Al-Si

Advanced Powder Choke Permeability

Permeabilities : 26, 60, 75, 90μSizes (OD) : 13, 17, 18, 20, 23, 24, 27,

33, 36, 40, 46, 47, 50, 57mm

APH XX P XX

Size of Choke Perm. Value

Note: The properties are typical value measured(60μ)Type of DC-tolerance:D = with DC-tolerance,T = without DC-tolerance, Z = zero-phase current

transformer

ASX - XXX X

Rated current in Ampere(rms): 040 = measures up to 40 Amperes in rms current(typical)

Terminal structure:L = Lead typeP = Pin type

AAddvvaanncceedd PPoowwddeerr CChhookkee ffoorr HHiigghh CCuurrrreenntt PPFFCC//OOuutt PPuutt CChhookkee AApppplliiccaattiioonn

CCuutt && LLaammiinnaatteedd CChhookkee ffoorr HHiigghh PPoowweerr AApppplliiccaattiioonn

CCuurrrreenntt TTrraannssffoorrmmeerrffoorr HHiigghh--AAccccuurraaccyy oonn EElleeccttrroonniicc WWaatttt HHoouurr MMeetteerr

Features

Applications

Structure

Specifications

Features

Applications

Material Information

Specifications

Features

Applications

Structure

Specifications

APHTM Size(Coated) AL(nH/N2) Le Ac Vol(OD×ID×HT) 60µ 75µ 90µ (cm) (cm2) (cm3)

APH13PXX 13.5×7.0×5.5 27 34 40 3.12 0.11 0.36APH17PXX 17.4×9.5×7.1 35 43 52 4.11 0.19 0.79APH18PXX 18.0×9.0×7.1 43 53 64 4.14 0.23 0.96APH20PXX 21.1×12.1×7.1 32 41 49 5.09 0.23 1.15APH23PXX 23.6×13.4×8.4 43 54 65 5.67 0.33 1.88APH24PXX 24.3×13.8×9.7 51 63 76 5.88 0.39 2.28APH27PXX 27.7×14.1×12.0 75 94 113 6.35 0.65 4.15APH33PXX 33.8×19.3×11.6 61 76 - 8.15 0.67 5.48APH36PXX 36.7×21.5×11.3 56 70 - 8.98 0.68 6.09APH40PXX 40.7×23.3×15.4 81 101 - 9.84 1.07 10.55APH46PXX 47.6×23.3×18.9 135 169 - 10.74 1.99 21.37APH57PXX 58.0×25.6×16.1 138 172 - 12.51 2.29 28.60

Part Number A B C D E F M Lm Ac Wa

(g) (cm) (cm2) (cm2)

AMCU-4 9 10 33 15 29 51 95 11.5 1.0 3.4

AMCU-6.3B 9.9 9.7 33 20 29.5 53 145 12.9 1.6 3.2AMCU-10 11 13 40 20 35 62 200 15.4 1.8 5.2

AMCU-16A 11 13 40 25 35 62 250 15.1 2.3 5.2AMCU-32 13 15 56 30 41 82 460 20.0 3.2 8.4AMCU-40 13 15 56 35 41 82 530 19.9 3.7 8.4AMCU-50 16 20 70 25 52 102 590 24.9 3.3 14.0AMCU-80 16 20 70 40 52 102 950 25.4 5.2 14.0AMCU-100 16 20 70 45 52 102 1060 25.0 5.9 14.0AMCU-200 19 25 83 50 63 121 1670 29.8 7.8 20.8AMCU-500 25 40 85 55 90 135 2900 35.6 11.3 34.0

AMCU-800B 30 40 95 85 100 135 5930 39.3 21.0 38.0AMCU-1000 33 40 105 85 106 171 7060 42.7 23.0 42.0

Primary Current Range Turns Ratio Errors Characteristics DimensionsPart Number IN IDC,MAX Phase L RCu RB ФФ Width×Height

(P/N) (Arms) (AOP) 1: ФФ(°°) (H) (ΩΩ) (ΩΩ) (mm) (mm×mm)

AST-005P/L 5 - 2500 0.30 183 152 150 5.8 24.5×11.1AST-005PA/LA 5 - 2500 0.38 183 110 150 7.5 23.2×10.8

AST-006P 6 - 2000 0.25 156 114 30 6.3 24.5×11.5AST-012P* 6 - 1500 0.64 43 75 75 4.8 22.7×12.0AST-040P/L 40 - 2500 0.17 183 152 18.75 5.8 24.5×11.1

AST-040PA/LA 40 - 2500 0.25 183 110 18.75 7.5 23.2×10.8AST-060P 60 - 2500 0.10 134 61 12.5 ≥7.7 31.1×15.3

AST-080P/L 80 - 2500 0.14 226 160 9.375 ≥8.9 26.1×17.1AST-120L 120 - 2500 0.10 180 68 6.25 12.2 39.0×17.6

ASDL-060L 60 60 2500 4.55 3.02 63 12.5 ≥8.0 30.5×15.0ASDL-060P 60 60 2500 4.55 3.02 63 12.5 ≥7.7 31.1×15.3ASDL-100L 100 100 2500 4.42 2.53 54 7.5 ≥9.5 35.0×15.0ASDL-120L 120 120 2500 4.21 2.00 40 6.25 ≥14.0 39.0×17.5ASM-120LS 120 120 2500 0.11 133 90 6.25 ≥12.5 37.7×16.0

Remarks1) Below data is measured under 50Hz operating frequency2) AST-Series without DC-Tolerance according to IEC 62053-22 and

ANSI C12.xx3) ASDL-Series with DC-Tolerance according to IEC 62053-21,23

Amorphous카다로그최종_100603 2010.6.3 3:36 PM 페이지2

Magnetic Amplifier for switch mode power supply Power supply for personal computer Open-frame switched-mode power suppliers Precise output voltage control such as 3.3V, 5.0V,12V Other kinds of saturable reactor

High squareness( ~ 98%) Low coercive force field Low temperature rise High efficiency Low reset current requirement

Low loss which improve the efficiency of a switch-mode power supply Very low saturated inductance Reduction of ripple noise and ringing Simplifies design of noise suppression circuit

Softening the reverse recovery phenomena in noise suppression Protection diode from being broken by spike voltage Ringing suppression in switch-mode power supplies Limit semiconductor rectifier reverse recovery current in

continuous mode converter Motor controller circuit used for MOSFET and/or bipolar transistor, BJT Ringing protection for MOSFET gate trigger Battery Charger for switch-mode power suppliers AC Adapter for switch-mode power supplies Spike noise protection for MOSFET bridge circuit

AMOGREENTECH Co., Ltd. SALES & MARKETING185-1, Sucham-ri, Tongjin-eup, Gimpo-shi, Kyonggi-do 415-863, Korea TEL: 82-31-981-0723 FAX: 82-31-989-7723(ext.351) URL: http://www.amocore.co.kr E-mail: dklee@amogreentech.co.kr

wwwwww..aammooccoorree..ccoo..kkrr

High saturation flux density of 1.2T Smaller component size High precision regulation Extended operating temperature range up to 120°°C

MMaagg--AAmmpp CChhookkee

NNooiissee SSuupppprreessssiioonn && SSppiikkee KKiilllleerr CChhookkee

Amorphous Magnetic Components & Applications

Advanced Powder Choke Common Mode Choke for EMI Solution Cut & Laminated Choke for High Power Application Noise Suppression & Spike Killer Choke Mag-Amp Choke Current Transformer

AAMMOOGGRREEEENNTTEECCHH produces key, advanced material - based components for Smart Grid & Energy savings

Features of Co-based Mag-Amp Choke

Features of Nanocrystalline Mag-Amp Choke

Applications

Features

Applications

High permeability Reduce in size Reduce the winding turns Low DC resistance Low core loss Low power consumption High impedance overall the wide-range of frequency Meet the EN 500081 and EN 500082 standards Getting a suitable insertion loss in wide-range of frequency Low profile (1 ~ 5 mm height)

Typical B-H loop and it’s incremental permeability at 10 kHz

CCoommmmoonn MMooddee CChhookkee

Features

EMI common mode filtering Telecommunications and data

communications interface transformers High accuracy current transformers High accuracy pulse transformers Ground fault protection devices

Applications

Characteristics

Part No.Finished Choke (mm) Leff Aeff Veff AL

OD ID HT (mm) (mm2) (mm3) (µH)

AMFN-16A-TH 17.8 8.3 8.1 40.8 14.4 588 41.4AMFN-20A-TH 22.5 10.4 10.1 50.1 23.4 1195 57.0AMFN-24A-TH 27.7 17.3 12.9 70.6 20.0 1414 28.4AMFN-25A-TH 27.7 17.3 12.9 70.6 20.0 1414 10.6AMFN-25S-TH 27.7 13.8 12.4 63.4 36.0 2282 67.0AMFN-32S-TH 32.7 17.8 12.4 78.5 40.0 3142 66.0AMFN-40S-TH 40.9 23.2 15.5 100.5 57.6 5789 74.0AMFN-40A-TH 42.9 28.8 18.2 113.0 48.0 5424 52.5AMFN-45S-TH 47.9 22.1 23.1 109.9 150.0 16485 127.0AMFN-50S-TH 53.8 36.2 23.9 141.3 80.0 11304 45.3AMFN-60S-TH 64.0 41.0 24.5 164.9 120.0 19788 68.5AMFN-63A-TH 66.7 46.3 28.8 177.4 130.0 23062 64.5AMFN-100S-TH 104.0 76.0 24.5 282.6 160.0 45216 47.5

Standard Choke Dimensions & Specifications

Amorphous카다로그최종_100603 2010.6.3 3:36 PM 페이지1

Magnetic Amplifier for switch mode power supply Power supply for personal computer Open-frame switched-mode power suppliers Precise output voltage control such as 3.3V, 5.0V,12V Other kinds of saturable reactor

High squareness( ~ 98%) Low coercive force field Low temperature rise High efficiency Low reset current requirement

Low loss which improve the efficiency of a switch-mode power supply Very low saturated inductance Reduction of ripple noise and ringing Simplifies design of noise suppression circuit

Softening the reverse recovery phenomena in noise suppression Protection diode from being broken by spike voltage Ringing suppression in switch-mode power supplies Limit semiconductor rectifier reverse recovery current in

continuous mode converter Motor controller circuit used for MOSFET and/or bipolar transistor, BJT Ringing protection for MOSFET gate trigger Battery Charger for switch-mode power suppliers AC Adapter for switch-mode power supplies Spike noise protection for MOSFET bridge circuit

AMOGREENTECH Co., Ltd. SALES & MARKETING185-1, Sucham-ri, Tongjin-eup, Gimpo-shi, Kyonggi-do 415-863, Korea TEL: 82-31-981-0723 FAX: 82-31-989-7723(ext.351) URL: http://www.amocore.co.kr E-mail: dklee@amogreentech.co.kr

wwwwww..aammooccoorree..ccoo..kkrr

High saturation flux density of 1.2T Smaller component size High precision regulation Extended operating temperature range up to 120°°C

MMaagg--AAmmpp CChhookkee

NNooiissee SSuupppprreessssiioonn && SSppiikkee KKiilllleerr CChhookkee

Amorphous Magnetic Components & Applications

Advanced Powder Choke Common Mode Choke for EMI Solution Cut & Laminated Choke for High Power Application Noise Suppression & Spike Killer Choke Mag-Amp Choke Current Transformer

AAMMOOGGRREEEENNTTEECCHH produces key, advanced material - based components for Smart Grid & Energy savings

Features of Co-based Mag-Amp Choke

Features of Nanocrystalline Mag-Amp Choke

Applications

Features

Applications

High permeability Reduce in size Reduce the winding turns Low DC resistance Low core loss Low power consumption High impedance overall the wide-range of frequency Meet the EN 500081 and EN 500082 standards Getting a suitable insertion loss in wide-range of frequency Low profile (1 ~ 5 mm height)

Typical B-H loop and it’s incremental permeability at 10 kHz

CCoommmmoonn MMooddee CChhookkee

Features

EMI common mode filtering Telecommunications and data

communications interface transformers High accuracy current transformers High accuracy pulse transformers Ground fault protection devices

Applications

Characteristics

Part No.Finished Choke (mm) Leff Aeff Veff AL

OD ID HT (mm) (mm2) (mm3) (µH)

AMFN-16A-TH 17.8 8.3 8.1 40.8 14.4 588 41.4AMFN-20A-TH 22.5 10.4 10.1 50.1 23.4 1195 57.0AMFN-24A-TH 27.7 17.3 12.9 70.6 20.0 1414 28.4AMFN-25A-TH 27.7 17.3 12.9 70.6 20.0 1414 10.6AMFN-25S-TH 27.7 13.8 12.4 63.4 36.0 2282 67.0AMFN-32S-TH 32.7 17.8 12.4 78.5 40.0 3142 66.0AMFN-40S-TH 40.9 23.2 15.5 100.5 57.6 5789 74.0AMFN-40A-TH 42.9 28.8 18.2 113.0 48.0 5424 52.5AMFN-45S-TH 47.9 22.1 23.1 109.9 150.0 16485 127.0AMFN-50S-TH 53.8 36.2 23.9 141.3 80.0 11304 45.3AMFN-60S-TH 64.0 41.0 24.5 164.9 120.0 19788 68.5AMFN-63A-TH 66.7 46.3 28.8 177.4 130.0 23062 64.5AMFN-100S-TH 104.0 76.0 24.5 282.6 160.0 45216 47.5

Standard Choke Dimensions & Specifications

Amorphous카다로그최종_100603 2010.6.3 3:36 PM 페이지1