9

AMO Operations Specifications - VAECO

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

AMO Operations Specifications Civil Aviation Administration of Vietnam

Flight Safety Standards Department

Notice This document is issued as a supplement to the display certificate issued to this AMO

The authonzatmns contained within this document represent the complete authonzattons granted to this AMO. No other maintenance functions are authorized.

This document must be presented upon the request of the authorities of any State.

SECTION A - APPROVED MAJ:l'l.'TENANCE ORGA'.lfJZA TION CONT ACT INFOR.MA TION

I. Official Name & Number. These operations specifications are issued to the holder of the Approved Maintenance Organization Certificate listed below listed below. These operations specifications detail the authorisations that have been issued to this AMO holder. No authorisations other than those listed within tht: sections of these opt:rations spt:cifications have been issued by the CAA V.

Or anizatioo Number Or anization Name VN-268/CAA V VIETNAM AIRLINES ENGINEERING COMPANY LTD.

2. Other Business Names . The business names that this AMO holder is authorized to use during the conduct of activities authorised by these operations specifications are listed below. No other names may be used in advertisement or during the conduct of approved activities.

Effective Date Business Name l" Janu 200& VIETNAM AIRLINES ENGINEERING COMPANY LTD.

3. Organization Certificate. The organization certificate that has been issued to this AMO holder is listed below. The organization may not conduct maintenance under any certificate or license other than that listed here.

Or anizatioo Identifier T e of Certificate Effective Date Control Number VN-268/CAA V AMO I" January 2008

A. CAA V APPROVAL: This section of the 0 erations S ecifications is a roved b direction of the Director-General, CAA V:

1. Approving Authority Si 2. Effective Date: 3. Arnendmt #: 00

ecifications:

Tran Van D9ng

CAA V Fonn 512C-A· AMO ~tu<crOpSpo:s IOJ20t I Page I of I

.IIJ}!'; ....

~.

AMO Operations SpecificationsCivil Aviation Administration of Vietnam

Flight Safety Standards Department

NoticeThis document is issued as a supplement to the display certificate issued to this AMO.

The authorizations contained within this document represent the completeauthorizations granted to this AMO. No other maintenance functions are authorized.This document must be presented upon the request of the authorities of any State.

SECTION B - BASE AND OFFICIAL RECORDS LOCATION INFORMATION

I. Official Bases. The location of the base(s) of this AMO Holder that are acceptable to the CAAV are listed below. Theorganization may not change these locations without giving 30-day notice of proposed change.

Type of Location Address Contact Person Telephone

Business Office NOI BAI INTERNATIONAL AIRPORT, HANOI, VIETNAM HA TIENDUNG 0903202744

NOI BAI INTERNATIONAL AIRPORT, HANOI, VIETNAMMain Maintenance Base TAN SON NHAT INTERNATIONAL AIRPORT, HO CHI HA TIENDUNG 0903202744

MINH, VIETNAM

2. Locations of Line Maintenance. The locations that AMO holder is approved for providing Line Maintenance services are listedbelow. The Organization shall not be allowed to provide Line Maintenance service before granting approval from CAA V:

NOI BAI (HAN), TAN SON NHAT (SGN), DA NANG (DAD), OlEN BIEN (DIN), CAT BI (HPH), VINH (VII), DONGHOI (VDH), PHUBAI (HUI), CAM RANH (CXR), BUON MA THUOT (BMV), PHU CAT (UIH), TUY HOA (TBB), THANH HOA (THO), LIEN KHUONG(DLI), CHU LAI (VCL), PLEIKU (PXU), RACH GIA (VKG), PHU QUOC (PQC), TRA NOC (VCA), CA MAU (CAH), CON SON (VCS),CHANG! (SIN), SUVARNABHUMI (BKK), ANGKOR (REP), SIHANOUK (KOS), PHNOM PENH (PNH).

3. Location of Records. The location of the official records ofthis AMO Holder that acceptable to the CAAV is listed below.The organization may not change these locations without giving 30-day notice of proposed change.

Type of Location Address Contact Person Telephone

Management Qualification RecordsNOI BAI INTERNATIONALAIRPORT,

HATIENDUNG 0903202744HANOI, VIETNAM

Certifying Staff Qualification and NOI BAI INTERNATIONALAIRPORT,HA TIENDUNG 0903202744

Authorizations HANOI, VIETNAM

Personnel Training RecordsNOI BAI INTERNATIONALAIRPORT,

HA TIEN DUNG 0903202744HANOI, VIETNAM

Records of Work PerformedNOI BAI INTERNATIONAL AIRPORT,

HA TIENDUNG 0903202744HANOI, VIETNAM

Ta Minh Trong ~ /l7P'7f 2--Deputy Director ofFSSD/CAAV

10 June 2015 02

A. CAAV APPROVAL: This section of the Operations Specifications is approved by direction of the Director-General, CAAV:

I. Approving Authority Signature & Title: 2. Effective Date: 3. Amendmt #:

B. ORGANIZATION CERTIFICATION: I hereby accept and receive this section of the Operations Specifications:

rHA~ANH

2. Title: 3. Date Signed1. Company Official Signature & Title:

PHO T6NG GIAM DOC AO JUNe 2045

CAAV Form 512C - B - AMOMaster OpSpecs (0)2011 Page I of I

~

.a.If.·~•...~......;",,~AMO Operations SpecificationsCivil Aviation Administration of Vietnam

Flight Safety Standards Department

NoticeThis document is issued as a supplement to the display certificate issued to this AMO.

The authorizations contained within this document represent the completeauthorizations granted to this AMO. No other maintenance functions are authorized.This document must be presented upon the request of the authorities of any State.

SECTION D - RATINGS ISSUED TO THIS APPROVED MAINTENANCE ORGANIZATION

The AMO holder is issued maintenance authorisations to conduct the following maintenance programs. These programs shallbe administered at all times be in conformance with the Viet Nam aviation regulations specified limiting factor and thedocuments listed as the basis for the authorisation.

Limited Rating:

RATING MANUFACTURER MAKEIMODEL MAINTENANCE LIMITATION

- Limited to maintenance, preventive maintenance,alterations and inspections up to 4C (24000 flighthours) and 16SC (6000 days or 32000 cycles) orequivalent at HAN

- Limited to maintenance, preventive maintenance,B777 alterations and inspections up to 4C (24000 flight

hours) and 16SC (6000 days or 32000 cycles) orequivalent at HCM

- Limited to Line maintenance as detail in the acceptedCapability List, as amended.

BOEING Note 2 below is applicable

- Limited to Line maintenance as detail in the acceptedB737 series Capability List, as amended.

Note 1& 2 below are applicable.

- Limited to maintenance, preventive maintenance,

AIRFRAME alterations and inspections up to but not including Ccheck, or equivalent at HAN and HCM.

B787 - Limited to Line maintenance as detail in the acceptedCapability List, as amended.

Note 2 below are applicable.

- Limited to maintenance, preventive maintenance,alterations and inspections up to C check series orequivalent at HAN

- Limited to maintenance, preventive maintenance,alterations and inspections up to C check series or

A319/A3201 equivalent at HCMAIRBUS

A321 Limited to maintenance, preventive maintenance,-alterations and inspections up to A check orequivalent at DAD

- Limited to Line maintenance as detail in the acceptedCapability List, as amended.Note 2 below is applicable

CAAV Form 512C - D - AMOMaster OpSpecs [0]2011 Page 1of4

RATING MANUFACTURER MAKEIMODEL MAINTENANCE LIMITATION

- Limited to maintenance, preventive maintenance,alterations and inspections up to 8C check (12 years)or equivalent at HAN

A330 - Limited to maintenance, preventive maintenance,alterations and inspections up to A check series orequivalent at HCM

- Limited to Line maintenance as detail in the acceptedCapability List, as amended.Note 2 below is applicable

- Limited to maintenance, preventive maintenance,alterations and inspections up to but not including C

A350check, or equivalent at HAN and HCM.

- Limited to Line maintenance as detail in the acceptedCapability List, as amended.Note 2 below are applicable.

- Limited to maintenance, preventive maintenance,alterations and inspections up to T12 check (12000flight hours) and Y12 check (12 years) or equivalentat HAN

- Limited to maintenance, preventive maintenance,FOKKER F70 alterations and inspections up to 125 flight hours orequivalent at HCM

- Limited to Line maintenance as detail in the acceptedCapability List, as amended.Note 2 below is applicable

- Limited to maintenance, preventive maintenance,alterations and inspections up to Weekly check orequivalent at HAN

- Limited to maintenance, preventive maintenance,

ATR ATR42172alterations and inspections up to 4C (20000 flighthours) or 36000 cycles and 12years or equivalent atHCM.

- Limited to Line maintenance as detail in the acceptedCapability List, as amended.Note 2 below is applicable

- Limited to maintenance, preventive maintenance,

GE90alterations (excluding overhaul) at HAN, HCM andDAD

GENERAL Note 2 below is applicableELECTRIC - Limited to maintenance, preventive maintenance,

POWERPLANT GEnxalterations (excluding overhaul) at HAN, HCM andDADNote 2 below is applicable

- Limited to maintenance, preventive maintenance,PRATT & PW4000

alterations (excluding overhaul) at HAN, HCM andWHITNEY DAD

Note 2 below is applicable

CAA V Form 512C - D - AMO Master OpSpecs [0]2011 Page 2 of 4

RATING MANUFACTURER MAKEfMODEL MAINTENANCE LIMITATION

- Limited to maintenance, preventive maintenance,CFM

CFM56alterations (excluding overhaul) at HAN, HCM and

INTERNA TIONAL DADNote 2 below is applicable

- Limited to maintenance, preventive maintenance,INTERNA TIONAL V2500

alterations (excluding overhaul) at HAN, HCM andAERO ENGINES DAD

Note 2 below is applicable.

- Limited to maintenance, preventive maintenance,

TAY 620-15alterations (excluding overhaul) at HAN, HCM andDAD

ROLLS-ROYCENote 2 below is applicable.

- Limited to maintenance, preventive maintenance,

TrentXWBalterations (excluding overhaul) at HAN, HCM andDADNote 2 below is applicable.

- Limited to maintenance, preventive maintenance,PRATT & PW1241127

alterations (excluding overhaul) at HAN, HCM andWHITNEY DAD

Note 2 below is applicable.

From the accepted From the - Limited to maintenance, preventive maintenance,accepted alterations and inspections according to

PROPELLER Capability List, as Capability List, Manufacturer's maintenance manualsamended as amended Note 2 below is applicable

From the - Limited to maintenance, preventive maintenance,COMPUTER

From the accepted accepted alterations and inspections according toSYSTEM

Capability List, as Capability List, Manufacturer's maintenance manualsamended as amended Note 2 below is applicable.

From the - Limited to maintenance, preventive maintenance,From the accepted accepted alterations and inspections according to

ACCESSORIES Capability List, as Capability List, Manufacturer's maintenance manualsamended as amended Note 2 below is applicable.

- Eddy Current Inspection- Ultrasonic Inspection

NON- - Liquid Penetrant InspectionDESTRUCTIVE Non-applicable Non-applicable - Magnetic Particle Inspection

TEST - Radiography Inspection- Thermography Inspection

Note 3 below is applicable.

NOTE 1: In regards to VAECO determining equivalent inspections: It is noted that air carriers have individuallyapproved maintenance programs which may vary from the manufacturer's Maintenance Planning Document(MPD). In these cases it is acceptable for VAECO to deviate from the manufacturer's MPD requirements andcomply with the equivalent air carriers approved maintenanceprogram.NOTE 2: All maintenance must be accomplished in accordance with current air carrier and/or original equipmentmanufacturer's maintenance manuals or other CAAVacceptable/approved data.

CAAV Form 512C - D - AMOMaster OpSpecs [0]2011 Page 3 of 4

-0 :::r:0,

-I o~

Z G)

G) );,

$:'

CJ 0'

In'

'"~_------l--I~I_------+_-

n -o· = o ..... - =­ ~w~ ~

O;.i ~e.

(1)0

en~I-------~w---

aq.~

::lI~

8..!::. ~ n ~ -o· = '"

AMO Operations Specifications Civil Aviation Administration of Vietnam

Flight Safety Standards Department

Notice

This document 1s issued as a supplement to the display certificate issued to 1his

AMO. The authorizaiions contained within this document represent the complete authorizations granted to 1his AMO. No other maintenance func11ons

are authorized.

This document must be presented upon 1he request of the au1honhes of any

State.

SECTION E - WORK PERFORMED AT A LOCATION OTHER TITAN BASE AND OFFICIAL RECORDS LOCATION INFORMATION

1. Locations. The AMO Holder may perform work at a place other than its fixed locations under special c ircumstances provided that it has the facil ities, materials, equipment, technical data and techn ical personnel to perfonn the work authorized in the following table:

Work Authorized Procedures Manual Contact Person Telephone Reference

As specified in Section D MOE Part 2 Chap I 1 PHAM DANG THANH 090 412 7722

2. P rohibition. The AMO ho lder may not perform continuous operation at a facility other than the AMO fixed locations listed in Section B of these operations specifications.

A. CAA V AP PROV AL: This section of the Operations Specifications is approved by direction of the Director-General, CAAV:

2 . Effective Date: 3. Amdmt#:

00

B. ORGANIZA TTON CERTJFICA TION: I hereb acce t and receive this section of the 0

I . Compan Official Signature & T itle: 2. Title:

CAAV fonu 512£-E· AMO MasterOpSpca 1012011 Page I of I