PAGE 524 Office/Tech: 641-623-5401SATISFACTION GUARANTEED

SINCE 1939

SPE

CIA

LTY

HA

ND

GU

N T

OO

LSSH

OP

SU

PP

LIE

S

There is a very narrow, (.004") throat di-ameter range where maximum accuracy is obtained. Go smaller or larger and accu-racy will suffer. By simply slipping the Plug

Gauge into the barrel throat, it’s possible to tell at a glance when you are approaching the correct diam-eter. Warns you before you go too far. Also valuable as a diagnostic tool for guns brought in with accuracy complaints, (designed for chamfers cut with our tools - may not give a correct reading on guns with other degrees of chamfer). Each gauge is self-piloted, pre-

cision-ground, hardened and stepped to show minimum and maximum optimum diameters. 11° and 18° Gauge measures both chamfer angles. Sizes .22 RF; .32; .38/.357; .38-40/.40; .41; .44; .45. 5° Ruger-Style Gauge available in .38/.357, .44 and .45 caliber only. abSPECS: 11/4" (3.2cm) long. Steel. Instructions included. 11°-18° gauges measure forcing cones with either angle. 5°, .38/.357 gauge is designed for Ruger .38/.357’s which began using this angle about 1983. Complete Set includes the Rimfire Gauge, all ten Centerfire Gauges and Instructions in a Bench Kit Box.

BARREL CHAMFERING PLUG GAUGESHelps You Get Maximum Accuracy & Best

Results Using Pistol Chamfering Tools

STOCK # ANGLE CALIBER PRICE#080-580-132AQ 11°-18° .32 Cal. 8K49E89 $ 68.47#080-580-138AQ 11°-18° .38/.357 Cal. 8K45L47 $ 61.99#080-580-140AQ 11°-18° .38-40/.40 Cal. 8K33J89 $ 49.95#080-580-141AQ 11°-18° .41 Cal. 8K36E41 $ 49.97#080-580-144AQ 11°-18° .44 Cal. 8K40K72 $ 55.89#080-580-145AQ 11°-18° .45 Cal. 8K57B11 $ 69.99#080-580-538AQ 5° .38/.357 Cal. 8K36E41 $ 49.97#080-580-539AQ 5° .44 Cal. 8K27E49 $ 37.19#080-580-540AQ 5° .45 Cal. 8K27B49 $ 37.19#080-580-122AQ Rimfire .22 Cal. 8K29F83 $ 39.95

#080-580-541AQ 5° .44 & .45 Add-on Set, 8K49H07 � $ 63.99#080-579-100AQ Complete Plug Ga. Set, 8K193F82 � 255.99

Made from the best grade, tightly woven, 2-ply yarn, all-cotton duck—the same stuff they make top quality, insulated coveralls from. Solvent- and oil-proof nylon thread used throughout. Everything heavily reinforced with seams rolled, double stitched and finished, all corners and stress points bar-tacked for strength. Machine washes and dries without edges curling or losing shape. abLONG SHOP APRON - Covers from shoulders to below the knees to keep dirt /crud off your clothes. Adjustable hook and loop neck strap for a custom fit. Neck and rear tie straps are dou-ble thickness for extra strength. Three pockets: a centered upper one with a sewn-in pencil slot and large lower ones on the left and right sides. O-Ring model features neck straps sewn to-gether as a halter and metal O-rings that help adjust the bib for maximum coverage.SPECS: 391/2" (100.3cm) long, 301/2" (77.5cm) wide. Pockets: Top - 47/8" (12.4cm) wide x 43/4" (12cm) high with pencil slot. Lower (x2) - 73/4" (19.7cm) wide by 63/4" (17.1cm) high. Ties: each 271/2" (69.8cm) long. Neck strap: 213/4" (55.2cm) long. O-Ring model has 1" (2.5cm) O.D. metal rings at top corners.

#084-071-000AQ Brownells Long Shop Apron, 4A25G48 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 33.99

#084-071-001AQ Long Premium Shop Apron With O-Ring, 4A31J49 � � � � � � � � � � � � � � � � � � � 37.99

SHORT SHOP APRON - Top-quality, custom-made, above-the-knees apron. Hook-and-loop closure on the neck strap lets you adjust the “bib” for maxi-mum coverage and the length to match wearer’s height. Centered top pocket is sewn solidly to the apron so it can’t swing and has a separate slot for pens, pencils, or a mike. Roomy, double, lower pockets. O-Ring model fea-tures neck straps sewn together as a halter and metal O-rings that help adjust the bib for maximum coverage. SPECS: 281/2" (72.4cm) long. 2" (63.5cm) wide. Pockets: Top - 41/8" (10.5cm) wide x 41/4" (12cm) high with pencil slot. Lower (x2) - 63/4" (17.1cm) wide x 61/4" (15.9cm) high. Ties: each 271/2" (69.8cm) long. Neck strap: 213/4" (55.2cm) long. O-Ring model has 1” (2.5cm) O.D. metal rings at top corners.

#084-071-050AQ Brownells Short Shop Apron, 4A26B35 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 32.99

#084-071-051AQ Short Premium Shop Apron With O-Ring, 4A29D49 � � � � � � � � � � � � � � � � � � 35.99

PREMIUM SHOP APRONSTop Quality, Custom-Made For The Professional Gunsmith

Heavyweight, brown, Neoprene apron protects clothing and skin from the oils, acids, caustics, greases and solvents encountered in the gun shop. The best apron we have seen for jobs involving hazardous chemicals.SPECS: Neoprene. 36" (91.4cm) x 46" (117cm).

NEOPRENE SHOP APRONProtects Against Chemical Splashes

#100-001-000AQ Neoprene Shop Apron, 1Z19F95 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 19.95

Latex free, black nitrile gloves offer superior comfort and strength with unsurpassed tactile sensitivity. Gloves have three times the puncture resis-tance of comparable latex or vi-

nyl gloves. Textured surface provides a sure grip in wet or dry working conditions. Gloves are powder free and won't leave a residue. Available in Industrial Grade or tactile sensitive Medical Grade gloves. 100 gloves per box.SPECS: Black nitrile. Non-latex, powder free.

AMMEX CORP.

BLACK NITRILE GLOVESIncreased Puncture

Resistance

#100-015-818AQ Industrial Grade, Black Nitrile Glove, Medium, 5F6B89 � � � � � � � � � � � � � � � � � � � � $ 8.99

#100-015-820AQ Industrial Grade, Black Nitrile Glove, Large, 5F6F89 � � � � � � � � � � � � � � � � � � � � � � � 8.99

#100-015-822AQ Industrial Grade, Black Nitrile Glove, X-Large, 5F6G89 � � � � � � � � � � � � � � � � � � � � � 8.99

#100-015-847AQ Medical Grade, Black Nitrile Glove, Medium, 5F6G79 � � � � � � � � � � � � � � � � � � � � 7.99

#100-015-848AQ Medical Grade, Black Nitrile Glove, Large, 5F6D79 � � � � � � � � � � � � � � � � � � � � � � � 7.99

#100-015-849AQ Medical Grade, Black Nitrile Glove, X-Large, 5F6Q79 � � � � � � � � � � � � � � � � � � � � � 7.99

Heavy duty, orange, nitrile gloves feature an aggressive diamond texture to increases gripping power in wet or dry conditions. Finger tips and palm are extra thick for ex-tended wear and enhanced tear resistance. Latex free gloves are resistant to most common chemicals, powder free, and have a polymer coating inside that makes getting them on or off easier. SPECS: Nitrile, orange, latex free. 100 per box.

AMMEX ORANGE NITRILE HEAVY DUTY GLOVES

Extra Thick For Better Performance, Protection & Safety

#100-016-022AQ Orange Nitrile Gloves, Medium, 5F13A00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 15.99

#100-016-023AQ Orange Nitrile Gloves, Large, 5F13H00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.99

#100-016-024AQ Orange Nitrile Gloves, X-Large, 5F13F00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.99

Gently removes metal filings, dirt, dust, bits of

abrasive stone, etc., out of actions and recesses. abSPECS: Varnished wood handle. Natural bristles. 51/8" (13cm) long.

ARMORER’S BRUSHFor Multiple Purposes

Around The Shop

#821-135-210AQ Armorer’s Brush, 8K7J00 � � � � � � � � � $ 8.99

Economical, disposable face mask protects you from breathing in airborne particles when grinding, sanding, sweeping, bagging, or oth-er activities that create dust. Light-weight, two-strap design with dual-point attachment gives a secure fit; metal nose clip and foam nose piece adjust for com-fort and help reduce eyewear fogging. Filter media contains electrostatically-charged microfibers that help make breathing easier. Not to be used with gases, vapors, aerosols, asbestos, arsenic, cadmium, lead, or other hazardous substances. Does not supply oxygen. abSPECS: Pak of 10.

3M

FILTER MASKProtects Lungs From Dust &

Airborne Particles

#604-850-010AQ 3M Filter Mask, 6K9G99 � � � � � � � � � � $ 16.99

The best cleaners we’ve found for pin and screw holes as well as slots and grooves. Rec-ommended to us by Thomas Getzen, they have tough plastic bristles worked into traditional pipe cleaners. Think of them as tiny scrub brushes with built-in mops. After the bristles loosen dirt and fouling, the mop holds all that crud and carries it out of the hole. Available in 360 Pak or box of 720.SPECS: 6" (15.2cm) long x 1/8" (3.2mm) diameter.

SUPER-DUTY PIPE CLEANERSUnique Bristled

Cleaners Scrub Holes, Slots & Grooves

#116-259-000AQ Super Duty Pipe Cleaners, 360-Pak, 6A12L25 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 15.99

#116-000-001AQ Super Duty Pipe Cleaners, Box of 720, 8K24I85 � � � � � � � � � � � � � � � � � � � � � � � 33.99

Made in the U.S. and dyed red; prewashed, with fully stitched edges. What makes them so much better than anything else we’ve found is the blend of cotton

and acrylic fibers. This blend keeps the absorbency so neces-sary for efficient cleanup, yet lets them stand up to hard use and frequent washings better than “cotton only” cloths. abSPECS: Approx. 13" (33cm) x 13". 86% Cotton/14% Acrylic blend.

SHOP CLOTHSWashable, Reusable, Absorbent - Great!!

#084-086-001AQ 1 Dz Red Shop Cloths, 9K10K55 � � � � $ 14.97- 6 or More - Red Shop Cloths, per dz, 9K8G84 . . $ 8.84

Handier than a napkin at a banquet, these 100% non-woven cotton Cleaning Pads are ideal for all kinds of shop “wipe-on” and “wipe-off” jobs. Cold blues, solvents, clean-ers, oils, grease, crud - just about anything. Has very high absorbency and extra wet strength. Pads are completely clean, lint-free, dust-free and safe to use on any delicate surface. They will not scratch. Excellent for sights, optics, lenses and all glasses. abSPECS: 33/4" (9.5cm) x 33/4". Bag of 100.

GUNSMITH

CLEANING PADSZillions Of Uses In Your Shop

#084-079-000AQ Gunsmith Cleaning Pads, 3A14J27 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 22.99

Now, when you need the per-fect, 100% cotton wiping or clean-ing rag you won’t have to reach for your favorite old “T” shirt. These high-quality, cleaning and wiping squares are knitted, not woven, from 5.3 oz., heavyweight cotton material that will not ravel, lint or string apart, even after repeated washings. Con-venient 12" x 12" size is just right for polishing, cleaning, stain-ing and finishing applications, plus shop cleanup and dust-ing. Highly absorbent right from the package, not treated with silicone or fillers; becomes even softer and more absorbent, wash after wash. abSPECS: 100% cotton, 12" (30cm) x 12", Pack of 3 dozen.

“T” SHIRT SQUARESSoft, Absorbent, Classy Rag,

Eliminates Robbing The Underwear Drawer

#856-112-036AQ “T” Shirt Squares, 6E18E49 � � � � � � � � � $ 23.99

Molded vinyl caps fit over the top of our Celluplastic Storage Tubes. Won’t shake or pop loose. abSPECS: Vinyl, black. Sold 50 or 100 of each size.

VINYL TUBE CAPSFit On Tight, Protect & Seal

STOCK # SIZE PRICEPER 50

#080-536-951AQ 3/8" (9.5mm)

8K3P82 $ 4.99

#080-536-952AQ 5/8" (15mm)

8K9N93 $ 13.25

#080-536-953AQ 7/8" (22mm)

8K16B42 $ 19.99

#080-536-954AQ 1" (2.5cm) 8K23P95 $ 31.95

STOCK # SIZE PRICEPER 100

#080-536-961AQ 3/8" (9.5mm)

8K5L33 $ 9.99

#080-536-962AQ 5/8" (15mm)

8K21J36 $ 26.99

#080-536-963AQ 7/8" (22mm)

8K24M08 $ 26.55

#080-536-964AQ 1" (2.5cm)

8K39B93 $ 53.25

Paul Schipper You guys rock!! Very happy with all my purchases.April 4 at 8:27pm near Nashville, TN Like • Comment • Share

FRIEND US ON FACEBOOK!

PAGE 525Orders/Tech: 800-741-0015order on the web

brownells.com

SHO

P SU

PP

LIES

Provides a consistent, small drop of your favor-ite lubricating oil, cleaner, bore solvent, stock stain or finish. Hollow steel “needle” accurately puts that drop of oil or solvent right where you need it most. Helps prevent over-lubrication, contamination and waste. Made from high density polyethylene plastic; fluorinated to resist breakdown from all common petroleum based solvents and protect any outer label from migration damage. Threaded aluminum top features a heavy-duty, inner, rubber seal and removable slip cap; both seal tightly and prevent leaks. abSPECS: Available in 1 fl. oz. (30ml) and 1/2 oz. (15ml) capaci-ties, both sold in 3 paks.

NEEDLE OILER BOTTLELeakproof, Solvent & Stain Resistant;

Controlled, Metered Flow

#084-000-127AQ Three 1 oz. Needle Oilers, 6A9B24 � � $ 11.99#084-000-361AQ Three 1/2 oz. Needle Oilers,

4H6K36 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

Give your fine tools the protection they deserve against acci- dental edge chipping and dulling in the bench drawer. Cellu- plastic tubes are easily cut to any length. Polyethylene plug caps provide tight, moisture-proof container, yet tool (or small part) inside is easily identified for immediate use. ab

WILL SAVE THEIR COST MANY TIMES OVER!!SPECS: 18" (45.7cm) long. Butyrate plastic, resists most oils/ solvents.HANDY SHOP ASSORTMENT - consisting of the following Cel-luplastic tubes and caps: Four 7/8" tubes and 40 caps. Six 5/8" tubes and 60 caps. Ten 3/8" tubes and 100 caps. Packed in heavy, shelf storing carton.

#080-536-000AQ Celluplastic Tube Shop Assortment, 8K43L91 � � � � � � � � � � � � � $ 67.99

QTY. DIA.STK# PLASTIC

TUBESSTK# CAPS

PER 100STK# CAPS

PER 1M30 3/8"

(9.5mm)#080-536-375AQ

$ 38.99#080-536-138AQ

$ 9.99#080-536-238AQ

$ 49.97

17 5/8" (15.9mm)

#080-536-625AQ $ 33.99

#080-536-158AQ $ 15.99

#080-536-258AQ $ 99.99

8 7/8" (22.2mm)

#080-536-875AQ $ 19.99

#080-536-178AQ $ 15.99

#080-536-278AQ $ 129.99

7 1" (2.5cm)

#080-536-100AQ $ 23.99

#080-536-110AQ $ 19.99

NA

CELLUPLASTIC TUBES

An Economical, Practical Method Of Storing Your Tools & Cartridge Samples & Instruments; Keeps Them Sharp,

Dirt Free & Professional Looking

Tough, Poly boxes for handy storage of dis-assembled guns, parts, actions, plus tools and “stuff.” No-slip stacking lip and strong ribbed sides. abSPECS: High-density poly-propylene, gray. Small - 10 7⁄8" (56.4cm) long, 8¼" (21cm) wide, 2½" (6.3cm) deep, sold 3 ea. Large - 16½" (41cm) long, 11" (28cm) wide, 3½" (8.8cm) deep. Sold 2 each.

COVERS & DIVIDERS - Clear covers snap onto your Poly Bench Boxes to protect the contents. Available for Small and Large boxes. Dividers create compartments to separate items and are sold in 3-Paks.SPECS: Polypropylene. Cover - Clear, sold one each. Dividers - Gray, sold in 3-Paks.

#536-100-111AQ Cover For Small Box, 6C4H50 � � � � � � � $ 5.99#536-100-005AQ Cover For Large Box, 6C5G70 � � � � � � � 6.99#536-100-109AQ Short Dividers For Small Box,

6C2D40 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#536-100-110AQ Long Dividers For Small Box,

6C2D40 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.99#536-100-003AQ Short Dividers For Lg Box, 6C2K40 � � 2.99#536-100-004AQ Long Dividers For Lg Box, 6C2I40 � � � 2.99

POLY BENCH BOXESIndestructible;

Stackable

#536-100-108AQ Small Bench Boxes, 6C18K00 � � � � � � � $ 24.99#536-100-002AQ Large Bench Boxes, 6C20I00 � � � � � � � 24.99

With this assortment you can quit hoarding every poly bag that comes into the shop! The assortment will give you the right size with a good closure - and enough on hand to take care of your needs. Their use is as extensive as your imagination…for carrying differ-ent weight handloads when hunting or test-firing…shotshell loads and hulls…smallest bags are great for pins, parts, springs, sights, screws…in the bluing room for storing parts after polishing and prior to bluing… bigger ones for larger gun parts and the largest will hold pistols and actions. Drop in one of our Rust-Blox™, zip shut and you can store things for years without loss or messing up - and in full view!SPECS: Heavy 2 mil. 6 sizes. Mini-Assortment contains 20 - 2’s; 20 - 3’s; 10 - 4’s; 8 - 5’s; 5 - 6’s; 3 - 9’s. Maxi-Assortment contains all sizes in quanti-ties shown below, 165 Bags in all.

POLY BAGSExtra Thick 2 Mil Construction

Holds Anything That Fits

#084-059-223AQ Poly Bag 2′s - 2" x 3", 40 bags, 4H3J16 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 3.97

#084-059-335AQ Poly Bag 3′s - 3" x 5", 35 bags, 4H3D16 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.97

#084-059-446AQ Poly Bag 4′s - 4" x 6", 30 bags, 4H4M78 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5.99

#084-059-558AQ Poly Bag 5′s - 5" x 8", 25 bags, 4H5E34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6.71

#084-059-669AQ Poly Bag 6′s - 6" x 9", 20 bags, 4H3Q28 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.97

#084-059-991AQ Poly Bag 9′s - 9" x 12", 15 bags, 4H3C72 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.97

#084-060-066AQ Mini-Assortment, 4H12G12 � � � � � � � � � 14.97#084-060-165AQ Maxi-Assortment, 4H20D09 � � � � � � � � 25.11

Tough, see-thru boxes for fast contents identification. Special polypropylene - won’t crack; survives all but some su-per solvents. abSPECS: Clear Polypropylene, divided into compartments.

COMPARTMENT BOXES

Tough, Clear Polypropylene, Resists Oils & Solvents

STOCK # L X W X DCOMPART-

MENTSPKG. OF PRICE

#313-100-155AQ 57/8" x 31/8" x 11/4" 5 2 3A5A70 $ 7.99#313-100-220AQ 41/2" x 23/4" x 11/4" 6 4 3A9F68 $ 12.99#313-100-215AQ 7" x 31/2" x 11/4" 5 2 3A6F54 $ 7.99#313-100-210AQ 7" x 31/2" x 11/4" 9 2 3A6N54 $ 7.99#313-100-203AQ 81/4" x 41/4" x 11/4" 6 2 3A8C80 $ 10.99#313-100-201AQ 81/4" x 41/4" x 11/4" 12 2 3A9G16 $ 11.99#313-100-606AQ 11" x 61/2" x 13/4" 6 1 3A7M36 $ 9.99#313-100-806AQ 127/8" x 85/8" x 21/4" 6 1 3A13P00 $ 15.99#313-100-824AQ 127/8" x 85/8" x 21/4" 24 1 3A13P00 $ 15.99#313-200-301AQ 81/4" x 41/4" x 11/4"* 18 1 3A6J00 $ 7.99#313-101-616AQ 103/4" x 63/4" x 13/4" 16 1 3A7K68 $ 9.99

Magnetic surface keeps steel springs, screws and other small, easy-to-lose parts safely where you put them. Has just enough magnetic pull to capture the parts without magne-tizing them, with raised sides to keep

them corralled. Great when taking apart small assemblies, like trigger groups, to keep the parts from rolling off your work bench.SPECS: Plastic tray with magnetic pad, black. Approximately 6" (15.2cm) long, 4" (10.2cm) wide, 3/8" (9.5mm) height.

MAGILLS MAGNETIC PARTS TRAYKeeps Small Steel Parts From

Getting Lost

#561-000-020AQ Magnetic Parts Tray, 1F10E18 � � � � $ 12.99

Ship guns P Post or UPS. “Master Carton” has 5 boxes, 5 outer sleeves, heavy-duty Carton Sealing Tape and In-structions. abSPECS: 511/2" (130.8cm) long; 7" (17.8cm) wide and 27/8" (7.3cm) high (in-side). 200 lb. (90.7kg) test.

GUN SHIPPING BOXESHeavy-Duty To

Ship Guns Safely

#084-024-000AQ Long-Gun Box Master Carton, (5 boxes), 4H67L58 � � � � � � � � � � � � � � � $ 79.99

- 5 or More - Long-Gun Box Master Cartons, per each carton, 4H56H99 . . . . . . . $ 56.99

Wrap around guns, tools, other steel valuables for protection from moisture and rust. 1 square foot of paper protects 1 cubic foot of space. Tests show 10-15 years protection when steel parts were wrapped in GUN-WRAP, sealed in plastic and stored in a cool place. Will not dam-age bluing or steel. Not recommended for aluminum, silver, brass or copper. May cosmetically stain nickel plating, tho’ normally cleans off. Not compatible with some older lacquer finishes. Modern finishes unaffected. abSPECS: Available in 12" (30.5cm) x 12" (30.5cm) Sheets or 4" (10.2cm) x 36" (91.4cm) Strips.

GUNWRAP™ PAPERMeets Mil Spec P-3420F

Rust-Free Storage In Gun-Factory Paper

#084-031-010AQ Trial Pak 1212, 10 Sheet, 4H6B29 � � � � � $ 9.97#084-031-436AQ Trial Pak 436, 10 Strip, 4H7C52 � � � � � � 9.99#084-032-050AQ Bulk Pak, 50 Sheets, 4H13K47 � � � � � � � � 24.99#084-032-150AQ Bulk Pak, 50 Strips, 4H15D43 � � � � � � � � 25.73

Our revolutionary ACRA-QUICK/ACRA-20 family of two part epoxies is unmatched for strength, hardening speed, and their ability to bond to al-most any material. They bond to wood, metal, ceramics, and most plastics with all the fa-mous strength and holding

power of ACRAGLAS. Once cured, they’re virtually impervious to the effects of moisture, sunlight, frigid temperatures, sol-vents, detergents, and most chemicals. Unlike lesser adhesives, they will not shrink, crack, or weaken over time. All ACRA epoxy formulas harden strong enough to handle in minutes and cure to full strength in 24 hours. And, they all dry clear.

Standard ACRA-QUICK 3-MINUTE EPOXY has a mixed working time of 2-3 minutes and is strong enough to handle 5 minutes after application (at 70˚F). ACRA-QUICK and ACRA-20 are semifluid formulas that flow well, fill gaps, and get into those hard-to-reach spots. ACRA-20 has a longer, 15-20 minute working time and reaches handling strength in 60 minutes. It will set up in temperatures down to 0˚F, and it can be colored with any of our ACRAGLAS dyes. ACRA-QUICK GEL sets up in 3-5 minutes, and their no-drip formulas are perfect for repairs where gravity works against you.

All ACRA epoxies come with a reusable, no-mess, applica-tion gun that automatically blends the resin and hardener to a perfect 1-to-1 ratio as you apply it to the work area. abSPECS: Each kit contains: 1.6 fl. oz. (50 ml) epoxy cartridge (Acra-Quick, Acra-Quick Gel, or Acra-20, depending on kit), 2 mixing tips, 1 applica-tion gun.

ACRA-QUICK™ & ACRA-20™Mixes Perfectly, Hardens

Fast, Holds Like Iron

REPLACEMENT ACRA PRODUCTS

#081-000-017AQ 50 ml Acra-Quick w/2 Mixing Tips, 1H12P85 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 15.99

#081-000-018AQ 50 ml Acra-20 w/2 Mixing Tips, 1H10D75 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.45

#081-000-020AQ 50 ml Acra-Quick Gel w/2 Mixing Tips, 1H10K75 � � � � � � � � � � � � � � � � � � � � � � 13.45

#081-000-021AQ Application Gun, 1E23G95 � � � � � � � � � 29.99#081-000-029AQ Mixing Tips, 5-pak, 1E6F75 � � � � � � � � � 9.00

#081-000-023AQ Acra-Quick Kit, 1H33K56 � � � � � � � � � � � $ 41.95#081-000-025AQ Acra-Quick Gel Kit, 1H33M56 � � � � � � 41.95#081-000-024AQ Acra-Quick 20 Kit, 1H35J87 � � � � � � � � 44.99

WANT TO LEARN MORE? FREE HOW-TO VIDEOS ONLINE! www.brownells.com

PAGE 526 Office/Tech: 641-623-5401SATISFACTION GUARANTEED

SINCE 1939

SHO

P S

UP

PLI

ES

The most sophisticated epoxy com-pound yet formulated for repairing, restoring, filling and bonding wood, metal, concrete, glass, and ceramics. Our unique applicator gun makes it to apply the precise amount you need. Has many times the strength of polyesters and withstands vibration, oils, practically all

acids, solvents, and abrasion. Gap-filling formula means parts do not have to fit perfectly for maximum bond. Can be colored using our Water Soluble Dyes, Epoxy Black, or liquid ACRAG-LAS® Dyes. Working time of 15-20 minutes. abSPECS: Set contains: 1 (one) 1.6 fl.oz. (50ml) ACRA-WELD cartridge, 2 mixing tips and application gun. Refill Kit contains: 1 (one) 1.6 fl.oz. (50ml) ACRA-WELD cartridge, 2 mixing tips.

ACRA-WELD™ CARTRIDGESThe Best Possible Epoxy In An

Easy-To-Use Applicator

#081-025-003AQ ACRA-WELD Kit, 1H35A88 � � � � � � � � � $ 44.99#081-025-004AQ ACRA-WELD Refill Kit, 8K12G91 � � � � 15.99#081-000-021AQ Application Gun, 1E23G95 � � � � � � � � � 29.99#081-000-029AQ Mixing Tips, 5-pak, 1E6F75 � � � � � � � � � 9.00

Handy line of adhesives, locking compounds, and lubri-cants are perfect for use on the bench or at the range. Also use-ful for a wide range of non-firearm applications, too. abINSTANT SUPER GLUE - Multi-purpose, instant-bonding adhesive for quick re-pairs. Great for wood stocks, filling in chips on clear finishes, and fast adhe-sion of leather, vinyl, rubber, plastic, and laminates.SPECS: 1/2 oz. (15ml) bottle.

#100-006-883AQ Instant Super Glue, 1/2 oz., 2A3H34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 4.49

DRIVE GRIP ANTI CAM-OUT PASTE - Increases grip strength between fastener head and tool; makes it easy to loosen and remove tight screws with worn heads.SPECS: 1/2 oz. (15ml) tube.

#100-006-882AQ Drive Grip Anti Cam-Out, 2A3Q34 � $ 4.49

ANTI-SEIZE NICKEL GRAPHITE COMPOUND - Extreme envi-ronment lubricant keeps moving parts from galling, prevents excessive wear, and works in tempera-ture extremes from -300 to +2,000°F.SPECS: 1/4 oz. (8ml) tube.

#100-006-884AQ Anti-Seize Compound, 1/4 oz., 2A3C34 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 4.49

VIBRA-TITE

SPORTSMAN’S BENCH PRODUCTSConvenient, Job-Specific Compounds; Hundreds Of Uses

All-purpose adhesive securely bonds parts, while it dampens vibration and noise. Works from -292° F (-180° C) to +2,012° F (+1100° C), and won’t break down when exposed to oils or cleaning sol-vents. Bonding strength is 250 PSI, yet parts can be separated without heat application. Perfect for use on sights and on flash hider/muzzle brake threads where high temperatures break down other adhesives. No mixing re-quired. Odorless, non-toxic, non-flammable. Just clean parts with an oil-free solvent, dry, and apply. SPECS: 2 fl. oz. (60ml) plastic squeeze bottle. Instructions included.

FLEXBAR

ROCKSETT ADHESIVEEliminates Vibration, Noise;

Removes Without Heat

#100-010-681AQ Rocksett Adhesive, 2 oz., 6K13K20 � � $ 14.99

#620 GREEN SLEEVE RETAINERSecures Press-Fit Assemblies

Works great for the permanent anchoring of studs, pins, and sleeves. Gives a positive seal; resists lubricants, solvents, etc. Hardens in four hours, full strength in ten. 3000 psi SPECS: Methacrylic ester base adhesive. .33 oz. (10 mL) tube. Carton of 12 - .33 oz. (10 mL) tubes.ab

#532-640-006AQ #620 10 mL Tube, 2C14Q64 � � � � � � � $ 20.99

#638 RETAINING COMPOUNDFast Drying, Super Adhesive For

Maximum Strength, Bonding Applications

Maximum strength, anaerobic adhesive provides a near indestructible bond for applications where high dynamic forces or cyclic loads are expected. Specifically designed to lock cylindrical assemblies with up to .010" (.25mm) clearance. Provides superior adhesion for permanent attachment of bolt body shims, gun sights, and other parts that take recoil and shock loads. Adheres in 5 minutes. Requires heat to remove. SPECS: .34 fl. oz. (10mL) bottle.ab

#532-000-008AQ #638 Retaining Compound, 2C16L49 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 19.99

#603 OIL TOLERANT RETAINING COMPOUND

Recommended by FNH; Helps Prevent Metal FatigueOil-tolerant retaining compound locks non-

threaded metals together and flows into those nearly “impossible” to reach places where a thorough degreasing isn’t possible. Specifically designed to lock cylindrical assemblies with up to .005" (0.1mm) clearance. Perfect for permanent installation of small, close-tolerance parts that absolutely must not shift under hard recoil or shock. Adheres in 10 minutes. Requires heat to remove. Recommended by FNH for attaching their rail systems on SCAR 16/S and 17/S

rifle platforms. abSPECS: Urethane methacrylate base adhesive. 1.6 fl. oz. (50ml) bottle.

#532-000-603AQ #603 Retaining Compound, 2C29G00 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 33.99

FORM-A-THREADRepair Stripped Threads

Without Redrilling/Tapping

Makes reliable thread repairs without tools. Thoroughly clean stripped threads, coat with Form-A-Thread and reinstall the screw or bolt. Prevents future corrosion and seizing. Effective to 128 ft. lbs. of torque on coarse or fine threads. SPECS: .44 fl. oz. (13 mL) net wt. in Kit.

#532-816-680AQ .44 oz. Form-A-Thread, 2C12D98 � � � $ 18.95

7471 PRIMERCleans & Prepares Metal Surfaces, Speeds Dry Time

Acetone-based, non-CFC, surface activa-tor thoroughly cleans and prepares metal sur-faces for rapid, high strength curing of Loctite anaerobic adhesives and sealants. Prevents loosening of scope mounts and rings caused by poor screw preparation. Especially useful for stainless steel, aluminum, blued, anodized, and other inert surfaces. Use also to speed cure time where temperatures are below 59˚F. (15˚C) and with parts having large bond gaps. abSPECS: 1.75 fl. oz. (52mL) bottle. Includes applicator brush and pump sprayer.

#532-000-003AQ Loctite 7471 Primer, 2C13E61 � � � � � � $ 19.99

PURPLE #222 THREADLOCKERFor Retaining Screws That Must Be Turned

Retains assembled screws tightly but still allows occasional turning or adjustment. Works especially well on fine-threaded aluminum and very small diam-eter screws. Screws coated with #222 can be removed with regular hand tools and do not need to be recoated after adjustments have been made. abSPECS: 10 mL (.3 oz.) net wt. bottle.

#532-222-010AQ #222 Threadlocker, 2C13N99 � � � � � � $ 17.95

BLUE #242 THREADLOCKERIdeal For Scope Mounting

Keeps those single action and other problem screws from backing out during shooting. Restores worn parts to original tight fit. Flows into and fills to .015" gap, then hardens into tough solid with 1400 psi strength. Excess wipes off. Medium strength - disassemble with normal tools. abSPECS: 10 mL (.3 oz.) net wt. bottle.

#532-242-006AQ #242 Threadlocker, 2C9H99 � � � � � � � $ 14.19

RED #271 THREADLOCKERHolds Screws In Place - Tight!

For worn, extra-loose screws and pins that just won’t stay put with #24221 Threadlocker. Also very good for restoring fit to worn parts and mounting bearings on shafts. Prevents fretting, corrosion. Maximum fill is .015", sets to 2600 psi. High strength -disassemble with heavy duty tools. SPECS: 10 mL (.3 oz.) net wt. bottle.ab

#532-271-006AQ #271 Threadlocker, 10mL bottle, 2C11G55 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 14.95

GREEN #290 THREADLOCKERFor Assembled Parts

Penetrates and works around threads. Capillary action draws #29021 down into threads where it hardens to lock screws in place after final assembly. Perfect for trigger adjust-ment screws, action assemblies and scope mounts. Medium-high strength - 1600 psi - disassembles with normal tools.

SPECS: 10 mL (.3 oz.) net wt. bottle.

#532-290-006AQ #290 Threadlocker, 2C9P71 � � � � � � � $ 13.99

BLACK MAX #380 ADHESIVEInstant; Withstands Shock;

Perfect For Gluing Sights & RibsInstantly glue on shotgun sights,

sight ramps or make fast repairs to vent ribs and beads with this mod-ern, tough-as-nails adhesive. A fast-fix for installing rifle-type sights on plain barreled shotguns. Fast-curing cyanoacrylate, toughened with elastomers, provides greater resistance to impact, vibration and increased shear strength. Impervious to most common gunshop solvents and cleaning agents. Ad-heres instantly to properly-prepared rubber, plastic or metal surfaces. Flat-black color blends with most blued firearms. abSPECS: Cyanoacrylate liquid, squeeze tube. .10 fl. oz. (3 mL).

#297-380-040AQ Loctite® Black Max, 2C4J50 � � � � � � � � � $ 5.99

#609 GREEN GENERAL PURPOSE RETAINERHolds Tritium & Handgun Sights Securely Against Recoil

Recommended by tritium sight makers to hold sights se-curely in slide dovetail. Works with any press fit, semi-auto pistol, front or rear, replacement sight. Joins dissimilar metals in 10 minutes. Withstands temperatures to 300 degrees. SPECS: .33 oz. (10mL) tube.

#532-000-001AQ #609 10 mL Tube, 2C12H52 � � � � � � � � $ 15.99

LOCTITE® THREADLOCKER® & ADHESIVES

- 10 or More -#271 Threadlocker, 10mL bottle, per each, 2C7D02 � � � � � � � � � � � � � � � � � � � � � � � � $ 12.54

- 12 or More -#620 10 mL Tube, per each, 2C10F70 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 18.20

- 10 or More -#290 Threadlocker, each, 2C6P77 � � � $ 12.55

- 12 or More -#242 Threadlocker, each, 2C6C30 � � � � $ 12.00

Self-feeding, applicator stick makes it easy to apply the right amount of Loc-tite product without it dripping onto surrounding parts. Semi-solid, no drip formula applies smoothly and consis-tently to ensure full thread coverage with less waste. Unbelievably mess free, so you spend less time cleaning up after a job. ab#248 THREADLOCKER STICK - Medium strength threadlocker eliminates loosening from vibration, shock and thermal ex-pansion. Perfect choice for most gunsmithing applications. Secures trigger screws and pins to ensure adjustments stay tight; prevents loosening of scope mounts and rings on hard recoiling guns. Handles screw diameters up to 3/4" diameter, and allows easy disassembly with light hand tools.SPECS: .67 oz. (19g) applicator stick.

#532-000-004AQ #248 Threadlocker Stick, 2C22M98 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.95

#268 THREADLOCKER STICK - Provides high-strength thread-locking adhesion for fasteners under extreme stress or vibra-tion and where routine adjustments are not required. Use local-ized heat and hand tools to remove.SPECS: .67 oz. (19g) applicator stick.

#532-000-005AQ #268 Threadlocker Stick, 2C22Q98 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 25.99

SILVER GRADE ANTI-SEIZE STICK - Petroleum-based product with the lubricating qualities of graphite. Reduces friction and protects metal parts in temperatures up to 1600°F (871°C). Eases disassembly of choke tubes and other gun parts prone to seiz-ing. Protects against rust and corrosion.SPECS: .70 oz. (20g) applicator stick.

#532-000-007AQ Silver Grade Anti-Seize Stick, 2C4M99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 5.95

LOCTITE® THREAD STICKSSemi-Solid Consistency Eliminates

Drips, Prevents Waste

Increase gun sales with these perforated, three-part, numbered Tickets. Establishes a lay-away contract and payment plan. Center stub fits in a 3" x 5" card file; bottom stub goes to customer. abSPECS: White, card stock. 31/8" (8cm) X 71/4" (18cm).

LAY-A-WAY TICKETSEncourage More Gun Sales

#084-046-100AQ 100 Lay-A-Way Tickets, 4H7H58 � � � � $ 9.97

Grey paperboard tags with red let-tering and reinforced grommets clearly mark that a weapon in your shop is a personal firearm and is not for sale. Keeps your shop in compliance with BATF regulations. Sold in paks of 25 or 50 with removable ties. abSPECS: Paperboard, grey with red lettering. 313/16" (9.6cm) x 113/16" (4.5cm). Sold in paks of 25 or 50. Removable ties included.

BATF “PERSONAL FIREARMS” TAGS

Clearly Mark Your Personal Weapons; BATF Compliant

#084-000-183AQ 25 BATF Personal Firearm Tags, 4H8H00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 9.99

#084-000-184AQ 50 BATF Personal Firearm Tags, 4H15L00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18.99

PAGE 527Orders/Tech: 800-741-0015order on the web

brownells.com

SHO

P SU

PP

LIES

Convenient startup kit contains critical items you need to set up a re-liable, efficient, legally compliant paperwork system for a business that buys, sells, and repairs firearms. Aids in accurately pricing and managing inventory, as well as tracking guns customers bring in for repair. The heart of the kit is the Firearms Record Book for maintaining a cor-rect, permanent record of your business’s firearm purchases and sales as required under the Gun Control Act of 1968. BATF approved format, 48 pages, with space to record 440 transac-tions, punched to fit the included 11/2" data binder. Heavy ma-nila card stock Gun Price Tags have plenty of room for pricing and specs to identify each gun and help customers comparison shop. Use the Repair Record/Invoice form to track each gun coming in for repairs from the time the customer drops it off through pickup and billing. These are triplicate, carbon-pack forms, with one copy for customer, one to stay with gun, and one for your bookkeeper.

Single-Stub Claim Checks prevent costly mistakes and un-happy customers, with plenty of room to record complete job details and a claim stub for the customer to make sure he gets the right gun back when the work is done. Lay-A-Way tickets help lock in sales that might otherwise slip away, while “Per-sonal Firearm” ID tags separate your personally owned guns from inventory for sale in accordance with BATF regulations. Bright red “Unsafe To Fire” Tags mark guns with excessive headspace, damage or other problems that make them unsafe to shoot. Plus, you get plenty of plastic tag ties to keep tags se-curely attached to guns. Refills are sold separately, so you can restock only the items you run out of.SPECS: Kit contains Firearms Record Book, 11/2" data binder, (100) Gun Price Tags, (100) Repair/Record Invoice forms, (100) Claim Checks, (100) Lay-A-Way Tickets, (25) Personal Firearm ID Tags, (25) Unsafe To Fire Tags, and (500) tag ties.

GUN SHOP RECORD-KEEPING STARTER KIT

Helps You Price, Track & Manage Guns In Your Shop For Sale Or Repair

#084-000-313AQ Record-Keeping Starter Kit, 4H51B27 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 62.99

Bright red paper tags with black lettering clearly identifies that a gun is unsafe to fire. Plenty of lines for writing customer and firearm information. Reinforced grommet for secure at-tachment to firearm. Perforated for easy tearing so both you and the customer have a record of the status. abSPECS: Paper, red with black lettering. 71/2" (19cm) x 3" (7.6cm). Available in 25-paks or 50-paks.

“UNSAFE TO FIRE” TAGSClearly Indicates That A Firearm Is Unsafe

#084-000-186AQ Unsafe To Fire Tags, 25-pak, 4H7H40 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 9.99

#084-000-187AQ Unsafe To Fire Tags, 50-pak, 4H14G07 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19.97

Two types, one for guns on the sale rack and one for guns on the repair rack. Fast to put on, low cost, weatherproof, resistant to most things and will outlast wire, string or rubberbands. abPERMANENT TAG TIES - lock-on permanently and must be bro-ken to be removed. Cannot be reused. Stops tag switching, pil-ferage and loss. Great where you don’t want the tags removed.SPECS: 9" (22.9cm) long.

#084-013-500AQ 500 Perm. Tag Ties, 4H16G10 � � � � � � � $ 20.99#084-013-900AQ 1000 Perm. Tag Ties, 4H25A95 � � � � � 33.99

REMOVABLE TAG TIES - Locking notches along entire length, easily removed and used again and again. Ideal for claim checks/ work tags; quickly removed for repairing, polishing, bluing, etc., then put back on until gun is ready for pickup.SPECS: 6" long.

#084-015-500AQ 500 Removable Tag Ties, 4H29I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 39.99

#084-015-900AQ 1,000 Removable Tag Ties, 4H55L15 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 62.99

TAG TIES

Faster & Easier Than String Or Wire

REMOVABLE PERMANENT

For you or your employees to remember the price and every detail on every gun in the shop is almost an impossible job. A gun sold at the wrong price or a sale lost because a customer’s questions went unanswered is money out of your pocket. These Gun Price Tags were designed with the help of gun-smiths like you to stop those problems. They let your customer (and sales people) make “apples-to-apples” comparisons and then select the gun that suits their needs best. There are 11 pre-printed headings for: Stock No.; Serial No.; Brand Name; Model; Bore Diameter; Barrel Length; Action Type; Caliber/Gauge; “Other” info; a blank line; a Retail Price line and a blank space. 3 Different colors give instant identifica-tion; lets you create your own color-coded system for new and used, or consignment guns. abSPECS: 33/4" (9.5cm) x 17/8" (4.8cm). 1/4" (6.3mm) reinforced hole for tag tie. Made of heavy card stock. Available in manilla, light blue, and yellow.

GUN PRICE TAGSSaves You Time -

Gives Customer All The Info

STK# 100 STK# 500 STK# 1000 COLOR#084-043-100AQ #084-043-500AQ #084-043-900AQ Manilla#084-044-100AQ #084-044-500AQ #084-044-900AQ Lt. Blue#084-045-100AQ #084-045-500AQ #084-045-900AQ Yellow

— Advise # — 100 Gun Price Tags, 4H8N95 � � � � � � � � $ 12.47— Advise # — 500 Gun Price Tags, 4H21A85 � � � � � � � � 29.99— Advise # — 1,000 Gun Price Tags, 4H32C85 � � � � � � 49.95

Heavy card stock tag attaches easily to the gun with a handy elastic loop—no strings to tie. Plenty of stretch to fit around a slide, stock, forend, or even through the triggerguard. Eleven pre-printed headings give you and your customer all the information needed to make the sale: stock number, serial number, manufacturer, model, action type, caliber/gauge, barrel length, choke, two lines for “other” info, retail price, a “sale price” line, and check boxes for “New” or “Used.” Available in natural Manila or Light Blue, so you can color-code your inventory. Even create a cod-ing system for new, used, or consignment guns. abSPECS: Heavy card stock, Manila or Light Blue, with elastic attachment ring. 23/4" (7cm) long, 2" (5cm) wide.

ELASTI-TOP GUN TAGAttaches Easily To Gun;

No Loose Strings; Available In 2 Colors

#084-143-100AQ 100 Gun Tags, Manila, 4H9A14 � � � � � $ 12.99#084-144-100AQ 100 Gun Tags, Lt. Blue, 4H9D14 � � � � � 12.99#084-143-500AQ 500 Gun Tags, Manila, 4H45D72 � � � � 59.99#084-154-500AQ 500 Gun Tags, Lt. Blue, 4H45P72 � � � � 59.99#084-143-900AQ 1,000 Gun Tags, Manila, 4H91A45 � � 109.99#084-144-900AQ 1,000 Gun Tags, Lt. Blue,

4H91H45 � � � � � � � � � � � � � � � � � � � � � � � � � � � 109.99

SINGLE STUB - Nothing improves the profession-alism of your gunsmithing business like the use of a well-designed claim check. We’ve improved our traditional claim checks by extending them to 12" long to provide much more space for detailed in-formation about the work to be performed, the parts required, the firearm’s condition, plus make, model, serial number, owner’s address, and much more. You’ll be able to record a complete record of the job, and provide your customer with a perforated stub to prevent wrongful claiming of a completed repair job. Bottom stub is left blank on the back so you can stamp it yourself with your own shop symbol, design, or a catchy business slogan. abSPECS: Made of heavy card stock. Available in manilla. 31/8" (7.9cm) x 12" (30.5cm).

#084-173-100AQ 100 Single Stub Claim Checks, 4H16Q50 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 21.99

#084-173-500AQ 500 Single Stub Claim Checks, 4H40D46 � � � � � � � � � � � � � � � � � � � � � � � � � � 51.99

#084-173-900AQ 1,000 Single Stub Claim Checks, 4H72I12 � � � � � � � � � � � � � � � � � � � � � � � � � � � 90.99

DOUBLE STUB CLAIM CHECKS - Especially for shops that do custom work, repairs or rebluing for stores or other gunsmiths. Has two identically numbered tear-off stubs. One goes to the customer, the store fills out the repair tag, and the other goes to the store when you pick up the gun. Gives complete stub/number control of that gun until it is delivered back to the customer. Eliminates mix-ups and confusion, improper claim-ing by the store or his customer. Spaces to record the same information as our CC-1 claim checks but shorter in length to save space. abSPECS: 31/8" (7.9cm) x 73/4" (19.7cm).

GUNSMITH

CLAIM CHECKSAvoid Costly Mistakes, Misunderstandings, Mad Customers;Now More Space To Record Detailed

Information

REPAIR RECORD/INVOICE

Two choices of gunsmith-designed forms for recording incoming repairs and tracking them through the billing process. Both styles have plenty of room to note re-quested repairs, work performed, and spe-cial notes by the gunsmith. Also includes space for gun and owner info and check-off blocks for items left with the gun (sling, lens covers, scope, etc.). Modern impression paper makes a du-plicate copy without the mess of carbon paper. Plenty of room at the top to print or stamp your store or shop logo. ab2-PART FORM - 2-part form has one copy for your customer and one that stays with the gun for your records. Blank space for the job number allows you to use this form with the Brownells Gun-smith Claim Checks. Simply record the number provided on the claim check in the blank spot on this form. Standard, 81/2" x 11" size.SPECS: 81/2" (21.6cm) x 11" (27.9cm) overall. Available in quantities of 100 and 500.

#084-188-100AQ 100 2-Part Forms, 4H19F89 � � � � � � � � $ 24.99#084-188-500AQ 500 2-Part Forms, 4H64B19 � � � � � � � 79.99

3-PART FORM - All-in-one, 3-part form includes has one copy for your customer, one for your bookkeeper, and one to stay with the gun. Each form is consecutively numbered for easy job tracking. Compact 51/2" x 91/8" size, and punched to fit a 2-ring clipboard with standard 23/4" hole spacing.SPECS: 51/2" (14cm) x 91/8" (23.8cm) overall. Supplied with twist ties and instructions. Available in quantities of 100 and 500.

#084-088-100AQ 100 3-Part Forms, 4H19A89 � � � � � � � $ 24.99#084-088-500AQ 500 3-Part Forms, 4H64K19 � � � � � � � 79.99

Neat, Easily Filled Out, Easily Filed Form Organizes Your Repairs

Required by every business that buys or sells firearms. And, now updated with the latest information about the National Instant Criminal Background Check System (NICS). Describes specifically how to enroll in and comply with NICS, plus gives a correct, permanent record of all purchases and sales of firearms as required under the Gun Control Act of 1968. The format used has been approved by the Bureau of Alcohol, Tobacco and Firearms of the U.S. Department of the Treasury. The book contains 48 pages; has 440 entry lines; and a reprint of ATF P 5300.15 (1/89) detailing FFL rules and regulations; plus a guide, with examples, to filling out the record entries cor-rectly. Punched for any 2 or 3 hole, or post binder. abSPECS: 48 pages. 81/2" (21.6cm) x 11" (27.9cm).

FIREARMS RECORD BOOKRevised To Include The Latest

Information About NICS

#108-006-000AQ Firearms Record, each, 8K2C99 � � � � � $ 2.99#108-006-010AQ Firearms Record, per 10, 8K24C99 � � � 24.99

#084-075-100AQ 100 Double-Stub Claim Checks, 4H9G81 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 12.47

#084-075-500AQ 500 Double-Stub Claim Checks, 4H27E95 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 34.95

#084-075-900AQ 1,000 Double-Stub Claim Checks, 4H51B95 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 64.95

Proud suPPorter

of Project Child Safe

Join Project ChildSafe in educating your family and community about safe gun handling and storage.

projectchildsafe.org