Upload
phamkhuong
View
217
Download
4
Embed Size (px)
Citation preview
Amir HajZargarbashi March 2010
1
CAD5 assignment – Crown and Top-left Structure 3D & 2D modeling
• In this assignment, you should generate, in imperial units, the 3D model of the crown and top-left structure shown below.
• The beams that you use in your model should be standard. • You do not need to model bolts in 3D neither welding. However in 2D you
will add symbols to show these items. • You should submit a 2D drawing of these parts of structure in an appropriate
layout format (size A or B) and with a standard scale. Furthermore, you should provide an Isometric View either in the same layout or in another one.
• For this assignment, there is no need to dimension your drawing.
Amir HajZargarbashi March 2010
2
Amir HajZargarbashi March 2010
3
Crown
Amir HajZargarbashi March 2010
4
This belongs to the main part of the structure and not to the crown.
Amir HajZargarbashi March 2010
5
Top-left structure
Amir HajZargarbashi March 2010
6
Amir HajZargarbashi March 2010
7