Upload
shashank-tandon
View
222
Download
0
Embed Size (px)
Citation preview
8/2/2019 Alwar Packaging Change
1/11
WIRE - PACKAGING CHANGE
NOV11
8/2/2019 Alwar Packaging Change
2/11
Wire Packaging has been changed withthe following features:-
1. New Contemporary graphics2. METPET carton to reduce duplicacy
3. Coil made compact for best fitment with the inners.4. Reduced dimensions of inners to reduce gaps after packing the
coils5. Reduced no of inners / outer carton to facilitate better handling
due to lower gross weight
6. Packing mode of inner cartons inside the outer carton changedfrom vertical to horizontal for better stacking strength7. Mesh printing on the closing flap of outer carton to indicate
pilferages, if any.
8/2/2019 Alwar Packaging Change
3/11
New Contemporary Graphics with
METPET carton to reduce duplicacy
Existing New
8/2/2019 Alwar Packaging Change
4/11
New design carton
side view
8/2/2019 Alwar Packaging Change
5/11
New coil 1.00 sqmm
Height 57 mm
ID 110 mm
OD 170 mm
New coil compact and tightExisting coil large and loose
Comparison of existing and new coils
Existing coil 1.00 sqmm
Height 35 mm
ID 150 mm
OD 200 mm
8/2/2019 Alwar Packaging Change
6/11
Reduced dimension of inner cartons for
compact packing of coils
SizeExisting size (L*W*H in
mm) Reduced New (L*W*H in mm)
0.50 sqmm 210*210*38 175*175*58
0.75 sqmm 210*210*38 175*175*58
1.00 sqmm 210*210*38 175*175*58
1.50 sqmm 210*210*48 180*180*55
2.50 sqmm 225*225*70 208*208*55
4.00 sqmm 240*240*70 225*225*55
6.00 sqmm 264*264*76 245*245*68
8/2/2019 Alwar Packaging Change
7/11
Reduced no of inners / Carton leading to lower
gross weight and better handling
Sl.#
Sizes(Sqmm)
Existing packagingin outer carton (nos.)
GrossWeight(Kgs.)
Changed packagingin outer carton (nos.)
GrossWeight(Kgs.)
1 0.50 20 16.64 16 13.30
2 0.75 20 21.31 16 17.10
3 1.00 20 28.93 16 23.14
4 1.50 16 30.96 12 23.22
5 2.50 12 36.31 8 24.20
6 4.00 4 16.48 4 16.48
7 6.00 4 22.90 4 22.90
8/2/2019 Alwar Packaging Change
8/11
Existing New
Inner packaging layout in outer carton fromVertical to Horizontal
8/2/2019 Alwar Packaging Change
9/11
Mesh printing on the closing flaps in new outer cartons to ensuretamper evidence - if BOPP tape is opened, the printing below the tape
will come off
Mesh printing on the closing flap of outer carton
Existing New
8/2/2019 Alwar Packaging Change
10/11
Implementation status and further action plan
Commercial production and packing in new inner started on 18thNov with 1.00 sq.mm size and first dispatch planned for Kolkatabranch.
Factory to confirm plan for other skus. (Expected 2.50 sqmm endof this month & other variants by 1stweek of Dec11)
Mktg. has already informed sales / branches / dealers about thenew packaging configuration.
Packaging department to follow up with branches and dealersand circulate feedback / project closure report.
8/2/2019 Alwar Packaging Change
11/11
Thank You