Aluminum Cabinet Installation - Signamax, Inc.signamax.com/wp-content/uploads/SignamaxAluminumCabinet...Assemble Adjustable feet at the Bottom Cover 3 Aluminum Cabinet Installation

Aluminum Cabinet Installation Guidefor N-Series and S-Series

www.signamax.com

Note : Periodically check that all fasteners and components are securely tightenedIf the Cabinet was purchased assembled, it is the owner’s responsibility, before insatalling any active Component the Cabinet for the first time, to make sure the Cabinet has been assembled and adjusted exactly as written in this manual, and any “Special Instructions” supplied and to make sure all fasteners and components are securely tightened.Note: Images are only for simutaion. The images shown may not match your product’s color.

Introduction This Owner’s Manual is made for several different cabinet Some illustrations may vary slightly from the actual product Follow instructions completely. If the cabinet has any parts that are not described in this manual, look for separate “Special Instructions” that

are supplied with the cabinet. Models may have different accessory items such as Perforated Front Door, Glass Door, Adapter etc. Please read through this entire manual before beginning assembly or maintenance

Tools Needed

Phillips Screwdriver BitTorx Screwdriver Bit T25Drill Screwdriver

1 | Aluminum Cabinet Installation Manual www.signamax.com sales@signamax | P. 1-800-446-2377

INSTALLATION LIST

N - SERIES S - SERIESW

=600

, D=6

00 -

800

W=6

00, D

=100

0-10

70-1

200

W=8

00, D

=600

- 80

0

W=6

00, D

=100

0- 1

070-

1200

W=6

00, D

=600

- 80

0

W=6

00, D

=100

0-10

70-1

200

W=8

00, D

=600

-800

W=6

00, D

=100

0-10

70-1

200

4 4 4 4 4 4 4 4

22 26 14 18 22 26 14 18

22 26 14 18 22 26 14 18

4 4 28 28 4 4 28 28

4 4 4 4 4 4 4 4

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1

4 4 4 4 4 4 4 4

2 2 2 2 2 2 2 2

0 0 4 4 0 0 4 4

4 4 4 4 4 4 4 4

2 0 2 0 2 0 2 0

0 4 0 4 0 4 0 4

0 2 0 2 0 2 0 2

1 1 1 1 1 1 1 1

1 1 1 1 0 0 0 0

1 1 1 1 0 0 0 0

DIN 912 M10X25 INBUS SCREW

DIN 912 M6X12 INBUS SCREW

DIN 125 M6 FLAT WASHER

M5 X12 TORX BOLT

M12X85 ADJUSTABLE FEET

M12*20 PLASTIC SCREW

BOTTOM FRAME ASSEMBLY

TOP FRAME ASSEMBLY

VERTICAL PROFILE

SIDE SUPPORT RAILS

SIDE SUPPORT ADAPTER

19" MOUNTING RAIL

SIDE PANEL

SPLIT SIDE PANEL

SPLIT SIDE PANEL MIDDLE PART

TOP COVER

REAR METAL SOLID PANEL

FRONT DOOR

FRONT&REAR PERFORATED FLAT DOOR 0 0 0 0 2 2 2 2

Note : Use the parts list included in this manual to verify that all parts are accounted for before assembly. If any

parts are missing, contact the retailer of this Cabinet for replacement parts


Assemble Adjustable feet at the Bottom Cover


Assemble Vertical Profiles

Insert each Vertical Profile as shown below

Fix the Vertical Profiles from both inner sides by using M10x20 Bolt

Do not over-tighten. This will damage the bolt


Assemble Top Frame

Fix the Top Frame from outside by using M10x20 Bolt



Assemble Top Cover

Fix the Top Cover from outside by using M12x20 Plastic Bolt



Assemble Side Support Rails

Fix Left and Right Supporting Rails with 4x M6 X12 Bolt


Assembling 19” Mounting Rails

for 800 width

Fix Adapters on Side Support Rails for left and right side

each Adapter has to be fixed with M5 X12 Torx


Assemble 19” Mounting Rails for 800 width

Fix the Mounting Rails with M5 X12 TorxMounting rails have to be fixed from 3 point on the cabinet Use the measuring tape and choose a safe distance (from the front door to the 19” mounting rails


Assemble 19” Mounting Rails for 600 widthFix the Mounting Rails with M6 X12 BoltMounting rails have to be fixed from 3 point on the cabinet Use the measuring tape and choose a safe distance (from the front door to the 19” mounting rails


When you install Side Panel make sure locks are unlocked.

Assemble Double Side Panel


Drive the lugs in the holes first. The holes are

positioned on the bottom cover

Screw Side Panel profile by using M6x12 Bolt


Lock side panel back



Drive the lugs in the holes first. The holes are positioned on

the bottom cover

Assemble Single Side Panel

When you install Rear Panel make sure

locks are unlocked.


Drive the lugs in the holes first. The holes are positioned on the

bottom cover

Assemble Rear Panel

Fix the Rear Door Locking Point by

using M6 X12 Bolt



Assembling Front Door

Insert Pin


www.signamax.com

CONNECT WITH US

Signamax Corporate999 NW 159th Dr, Miami, FL 33169 • 800.446.2377 / 305.944.7710

AUSTRALIA8 Port Kembla Dr, Perth,Bibra Lake, WA 6163 AustraliaT: +61 89 202 800E: [email protected]

INDIAA-74 FIEE Complex, OKHLAIndust. Park Phase II NewDelhi, 110020IndiaT: +91 114 106 9843E: [email protected]

MIDDLE EASTNo 3 Reviera Hotel, Baniyas Rd, Deira, DubaiUnited Arab Emirates T: +97 155 424 2722 E: [email protected]

SOUTH EAST ASIA 55 UBI Ave 1,#02-10 UBI 55 Singapore, 408935 T: +65 6925 5798 E:[email protected]

CANADA2-975 Bleams Rd, Kitchener,Ontario CanadaN2E3Z5T: +1 519 570 3911 E:[email protected]

MALAYSIASuite 1.2, 1st Floor Bangunan THK No.2A Jalan 243 Seksyen 51a46100 Petaling Jaya, Selangor, Malaysia T: +60 3-7873 7317 E: [email protected]

SRI LANKA49 Sri Jinarathana Rd Colombo 2,Sri LankaT: +94 114 792 100 E: [email protected]

UK7-10 Chandos Street,London, W1G 9DQUnited KingdomT: +44 20 358 22933E: [email protected]

International Sales Offices:

Documents

Aluminum Cabinet Installation - Signamax, Inc.signamax.com/wp-content/uploads/SignamaxAluminumCabinet...Assemble Adjustable feet at the Bottom Cover 3 Aluminum Cabinet Installation