2
WWW.BULLETTRAILER.COM The Bullet has evolved over more than 30 years of innovative design. Today it’s simply the finest aluminum bottom dump ever built, outperforming the competition whether you haul coal, sugar beets, or lightweight aggregate. If weight is critical to your operation, the Bullet is the right choice. The best choice. ALUMINUM BOTTOM DUMP

ALUMINUM BOTTOM DUMP - · PDF fileToday it’s simply the finest aluminum bottom dump ever built, ... Steel Parts Primed and Painted Black Polyurethane ... 6/14/2013 9:16:53 PM

  • Upload
    hadan

  • View
    218

  • Download
    5

Embed Size (px)

Citation preview

WW

W.B

UL

LE

TT

RA

ILE

R.C

OM

The Bullet has evolved over more than 30 years of innovative design. Today it’s simply the finest aluminum bottom dump ever built, outperforming the competition whether you haul coal, sugar beets, or lightweight aggregate. If weight is critical to your operation, the Bullet is the right choice. The best choice.

ALUMINUM BOTTOM DUMP

MODEL: BABDS-24-1-2

CAPACITY: 24 Cubic Yards

WHEELBASE: 434” Center Line of Kingpin to Center Line of Rear Axle

DESIGN: The Bullet ® Aluminum Single Gate Windrow

MATERIAL: 5454-H32 Aluminum Sheet, 6061-T6 Extrusions

UPPER HOPPER: 78” x 196” Inside Opening

LOWER HOPPER: Profile Ends to Gate, Heavy Duty Reinforced Front and Rear Hopper End

GATES: 46” W x 134” L Opening, Air Operated with Internal Stops, 14” Unladen Ground Clearance

CYLINDERS: (2) 7” x 24”Air Operated, Composite Barrel with Stainless Steel Ram

CONTROL VALVES: Rexroth Electric Over Air “Jogging Valve” Wired to Separate 6-Way Electrical Connector on Front Head, Open/Close Buttons Streetside Rear of gates, Air System Filter in Rear Void

AIR RESERVOIR: 45 Gallon Capacity, Gate Control System in Rear Void

LADDER: Aluminum Steps Up Rear Cone with Grab Handles

FENDERS - FRONT: Full Sloping Aluminum with No Mudflaps

FENDERS - REAR: Full Sloping Aluminum with 2 Flaps

LANDING GEAR: Aluminum Drop Tubes Mounted on Gates

SUSPENSION: (2) Hutch CH9700, 3-Leaf Hi-Arch Springs

AXLES: (2) 71 ½” Track, ½” Wall, TP-Spindles

BRAKES: 16 ½” x 7” “Q” Series

WHEEL ENDS: 10 Stud Hub Pilot (HP10)

HUBS: (4) Conmet Aluminum

DRUMS: (4) Fabricated Steel, Outboard Mount

ABS SYSTEM: Haldex PLC Select ABS

WHEELS & TIRES: (8) 8.25 x 22.5 Aluminum Wheels & (8) 11R 22.5 Michelin XT1 Tires

KINGPIN PLATE: ShirAul Oscillating Non-Adjustable Tapered 5/16” Kingpin Plate and 2” SAE Kingpin

TAIL LIGHTS: Trucklite LED Tail and Marker Lights, (3) Tail Lights Per Side with Center Amber Turn

MARKER LIGHTS: (5) LED Lights Per Side. Center Marker Flashes with Turn Signal

PAINT: Steel Parts Primed and Painted Black Polyurethane

*ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

GENERAL CONSTRUCTION | GATES | TRIM | SUSPENSION | ELECTRICAL SYSTEM | FINISH

CUSTOM OPTIONS:Custom Lengths / Axle Configurations

Landing Gear

Air Ride

Tire Inflation System

Composite Springs

Tarp System

SH

IRA

UL

, LL

C •

TH

E B

UL

LE

T

SHIRAUL, SHIRAUL and Design, THE BULLET, THE BULLET and Design, and the shape ofthe SHIRAUL BULLET trailer are registered trademarks of Bullet Trailer by ShirAul, LLC.