Upload
sian-image
View
222
Download
4
Embed Size (px)
DESCRIPTION
Drytec Aluminium Range Fine Filters
Citation preview
DRYTEC ALUMINIUM RANGE FINE FILTERS
Flow rates from 25 to 2210 m³/h Pipe size from ¼” to 3”
High efficiency filtration elements
Color coded elements P X Y A Working temperature upto 80°C
(25°C for activated carbon element) Low initial pressure drop Dept filtration using 8 time
wrapped filter medium Maximum working pressure 16 bar Synthetic end-caps Strong Helix tube inner and outher
core
Why use DRYTEC compressed air filter ?
Differential pressure indicator as standard Aluminium housing for pressure upto 16 bars The housings are in-and outside protected
with an anti-corrosion coating Reliable float drain Screwed connetions fron ¼” to 3” Flow from 25 to 2210 m³/h Partical removal from 5 to 0,01 µ Maximum oil carryover from 5 to 0,003
mg/m³ @ 21°C
* Maximum working pressure for filter G1510 and G2210 is 12 barg
When ordering don’t forget to indicate the filtration grade expected behind the filter code (ex. G300X)
m³/H CFM A B C D E
G25 1/4 25 15 1,36 M25 96 20 237 110 22
G50 3/8 50 29 1,36 M50 96 20 237 110 22
G100 1/2 100 59 1,37 M100 96 20 237 150 22
G150 3/4 150 88 3,12 M150 117 34 375 190 56
G200 3/4 200 118 3,29 M200 117 34 375 250 56
G250 1 250 147 3,49 M250 117 34 465 300 56
G300 1 1/4 300 176 3,38 M300 117 34 465 350 56
G500 1 1/4 500 294 3,83 M500 117 34 530 380 56
G600 1 1/2 600 353 3,84 M600 117 34 530 425 56
G851 2 851 501 10,01 M851 170 64 722 480 56
G1210 2 1210 712 10,43 M1210 170 64 722 550 56
G1810 3 1810 1065 19,10 M1810 235 72 760 550 56
G2210 3 2210 1300 19,64 M2210 235 72 760 600 56
Technical details
FilterModel
Pipe Size
(inches)
ElementModel
Housing Dimensions in mmFlow Rate Weight kg
PREFILTERING
GENERALUSE
OILREMOVAL
ACTIVATEDCARBON
Grade P X Y A5 1 0.01 0.015 0.5 0.01 0.003
80 80 80 2540 80 100 80
700 700 700 70016 16 16 16
Green Blue Red Metal
SPECIFICATION AIR FLOW
Particle in Microns
Max. working pressure in bars *Element colour code
SPECIFICATION
Max. Oil Carry over at 21°C (mg/M³) Max. Working temperature (°C)Initial pressure loss (mbar)Pressure loss for element change (mbar)
1 3 5 7 9 11 13 15 160.5 0.71 0.87 1 1.12 1.22 1.32 1.44 1.50
Operating pressure in barFor the max flow rate, multiply above flow rate shown in the above table with the
correction factor.Operating pressure in bars
Correction factor
Subject to technical changes without prior notice
Your dealer
Different options available
Filter elements for other housings