Aluminium Profile Wood Grain Machine

TEL: 86-757-81020128 FAX:86-757-81020129

FOSHAN METECH ALUMINUM TECHNOLOGY CO., LTD http:// www.cnmetech.com Email: [email protected]

Buyer:Party A Seller(Party B)

Company:

Company

Foshan Metech Aluminum Technology Co.,Ltd

Representative

Representative:

Mr. Michael Tan

0086-18664280343

Tel: Tel: 0086-757-81020128

Fax: Fax: 0086-757-81020129 Add

Add 2nd Floor, E1 building , Jiulong

hardware&stainless steel trade centre, Dali

town, Nanhai district, Foshan ,Guangdong,

China

Email:

Email: [email protected]

TEL: 86-757-81020128 FAX:86-757-81020129


Quotation sheet:

No. Name/Specification Qty Unit Price

USD Total Price

USD Remark

1

Aluminum profile semi-automatic wood effect transfer machine

1 set Refer to the below technical specification

Total

A. The above price is based on FOB GUANGZHOUwhich is valid for 30 days. B. Payment terms: T/T, prepaid 30% as deposit, balance paid off before delivery. C. Delivery time: within 30 days after get the down payment from the buyer.

D. The Seller would arrange 1 engineer to the Buyers site for installation ( about 15

days),.The buyer should afford the aboard grant to the construction workers of the

supplier (USD 50 per day for him). In addition, the international travel cost (air

ticket, Visa etc) of the engineers sent by the Seller should be born by the Buyer

E. After-sales service: if need any after-sales service of wood effect transfer machine,

can contact with us at any time, first service by call/e-mail, if still can not solve,

seller will send technician for maintain,buyer pay for round trip tickets, food and

living room

F. Containers: 40HQ*1+20GP*1

TEL: 86-757-81020128 FAX:86-757-81020129


Wood Effect Transfer Machine whole system including:

Heating oven 1 set

Single Vacuum Suction Table 2 sets

Heating system 1set

Electric control system 1set

Vacuum suction system 1 set

Parameters:

Temperature: 150~180 0C

Temperature uniformity: 50C

Transfer time: 7~15min

Production: 80~240 pcs/hour

Overall dimension: 28.5m*2.3m*3.0m

Energy: Natural gas ,LPG,Diesel oil, Electricity

Natural gas consumption: 10m3/hour

LPG consumption: 5m3/hour

Diesel oil consumption: 5kg/hour

Electricity consumption: 60kw.h(if energy is only electricity)

Power: 13.7kw(if energy is not electricity)

Power: 100kw(if energy is electricity)

Maximum profile length: 7000mm

Maximum profile Height: 140mm

Control : PLC control

Operation: Touch Screen and button

1:Heating Oven 1set

Material:

Outside: A3 Steel Plant(=3mm)

Inside: Galvanized Steel Panel=2.0mm

TEL: 86-757-81020128 FAX:86-757-81020129


Hot air running pipe: Galvanized Steel Panel=1.5mm)

Base support: Angle steel and Channeled Steel

Insulation form: superior cotton, thickness 200mm

Size:

External dimension: 8500mm*1900mm*3200mm (L*W*H)

Internal dimension: 8000mm*1400mm*700mm(L*W*H)

2: Single Vacuum Suction Table 2sets

Material:

Table Skeleton:square tubes,70mm*70mm

Base frame:square tubes,70mm*70mm

Rail:angle steel and square tubes

Sliding contact line: safe,easy,smooth contacting for electricity control

Vacuum system:

Vacuum motor: 2 sets

Vacuum pump: 2 sets

Vacuum suction head: 10heads*2 layers*2tables=40 heads

Reverse blower: 2sets(auto blower after transferring,remove paper/film easily)

3:Heating system 1set

Burning room:#321 stainless steel,=4mm

TEL: 86-757-81020128 FAX:86-757-81020129


Main frame:A3 steel panel,=3mm

Thermal insulation:superior cotton

Heating room size: 3100mm*1100mm*1300mm(L*W*H)

Hot air circulation fan: 1set

Burner: Sweden burner, BG300, 1set

Fan introduction

4. Electric Control System, 1 Set

Above setup includes electricity control system;

Circulating Fan 4-72No5.6C # Boiler Fan, Maximum Temp. 400 Centigrade,

1 Set

Fan Maximum Flux

Rate

12000m3/h

Fan Maximum

Pressure

1100pa

Fan Power 5.5 Kw

Maximum Temp.

Resistant

400 Centigrade

Temp. Controller PLC control with alarm(high temperature alarm and ignition

failure alarm to protect) , automatic, when temperature

reach required temp. Burner stop heating

automatically,when temp.is lower than required

temp.burner heat again automatically,save more energy.

Taiwan Delta PLC

Output for Control

Mode

PLC with Alarm output(remarks:PID control is easy to

break on basis of burner, because burner ignition and put

out a fire automatically)

TEL: 86-757-81020128 FAX:86-757-81020129


a) All control cable/wiring is fitted with metallic or fire-retardant plastic tube

protection, and use sliding contact wire , table run inside and outside

automatically, PLC control,save space,run steadily ,safely and smoothly.

b) The location of Control Panel will be installed per buyers request.

c) Electrical components/parts within the control panel is selected from branded

manufacturers.

d) Centralized Control Cabinet x 1 ;

e) Power Configuration: AC , 380V,3 Phases, 50 Hz, 4Wires (customized);

f) Temperature Control Meter Accuracy:1;

g) Protection and Alert Function will be activated when the following occurs

i. Burner catches fire or malfunction;

ii. Emergency Stop for the production line

iii. Heat Exchanger Exceeding Temperature limit

iv. Machine Start Warning

v. High temperature

vi. Fire ignition failure

h) Control System Function:

A Burner Temperature Display and Control (Taiwan Touch

Screen)

1 Set

B PLC Temperature Control: 1 Set

C Circulating Fan Control 1 Set

E Vacuum System Control 2 Sets

F Motor Control 2 Sets

G Oven Door Opening 1 Set

TEL: 86-757-81020128 FAX:86-757-81020129


Loading Pictures:

TEL: 86-757-81020128 FAX:86-757-81020129


Wood Effect: Wood film wood paper

Documents

Aluminium Profile Wood Grain Machine