Embed Size (px)
Citation preview
www.theformwork.it
ALUMINIUM PANEL
SLAB FORMWORK
2
SKYLIGHT
WARNING!
Important: the use of formwork equipments is subject to the requirements foreseen by the laws and codes of practice in force in the different States. The specific instructions for the use and limitation of use must be strictly observed. The photographs shown in this brochure are snapshots that document real construction sites. Especially the particular images related to the safe use of formwork on site, are not always to be considered in accordance with theregulations for the prevention of occupational accidents on construction sites. Therefore the photo images should not be intended as examples of use. If a usage of the formwork does not fall in the scope of work or deviates in dimensions and / or overloading from the configurations set out by the relevant instruction sheets, a specific technical and calculation report must be carried out. The Formwork company pursues a policy of continuous technological improvement and, therefore, reserves the right to bring, at any time, without prior notice, modifications and adjustments in order to comply with the technical regulations of the different states, yet without compromising the essential functional characteristics.
Index
Main Components
Internal Components Production
Assembly On Site
Striking
Lajflex-Skylight Integration
3
INTERNAL COMPONENTS PRODUCTIONBased on a solid thirty years’ experience as a producer, The Formwork S.r.l. produces technological equipment for the building industry. Engineering, design and testing are at the basis of every project carried out by our company.
4
ALLUMINIUM PANEL SLAB FORMWORK
SKYLIGHT
Formwork for closed panel slab
Studied for the most demanding construction sites, where velocity, firmness, flexibility and technology must be a whole with the product. The study of The Formwork S.r.l. technicians realised a high quality product, able to respond to the multiple needs of the modern construction site. The structure of the panel, different from all the others in commerce, was realised to prop up significant payloads, maintaining a reduced weight.
5
www.theformwork.it
System components
The Formwork S.r.l. decided to keep faith to its technological commitment, producing a single combined system for the fulfilment of every type of slab; for this reason the new Skylight panel integrates perfectly with the Lajflex system and all its accessories, allowing the technological growth of its customers without a continuous replacement of the components.
D lowering head Alu beam
Skylight closed panel 160x80
Skylight closed panel 110x80
Skylight closed panel 160x55
Skylight closed panel 110x55
Compensation cap
6
1
2
3
4
ALLUMINIUM PANEL SLAB FORMWORK
Advantages of the SKYLIGHT system
EASY TO ASSEMBLEa few simple procedures allow the assembly of the 3 main elements of the system.
FAST TO ASSEMBLE: a system based on simple concepts results quick in its purpose; so the laying results fast and safe.
FLEXIBLE:being flexibility the primary feature of the system, the formwork fully integrates with the previous systems and with the most demanding construction types.
SAFE:integrating with the others The Formwork S.r.l. systems, the worker finds all the accessories to secure the working area simply and quickly.
7
www.theformwork.it
1 2
3 4
5 6
ASSEMBLY AND DISASSEMBLY OF THE SKYLIGHT STRUCTURE
STRIKING
PROGRESS
PROPS, MAIN BEAMS AND SKYLIGHT PANELS PLACEMENT
8
ALLUMINIUM PANEL SLAB FORMWORK
PLACING AND STRIKING IN THE CONSTRUCTION SITE
DIFFERENT PAYLOADS OF THE SYSTEM
Props Grid Main Beams Panels H max
slab
160x160 cm L=160 cm 80x160 40 cm
160x110 cm L=160 cm 80x110 60 cm
110x160 cm L=110 cm 55x160 60 cm
110x110 cm L=110 cm 55x110 80 cm
9
www.theformwork.it
Making the system combined was the basic concept of our design engineers; the great result achieved is the complete integration of a system with the others, allowing the designer to establish, depending on the
project requirements, which system is worth using. We also have a flexibility at the highest levels, never achieved before in the field of slab formworks.
LAJFLEX-SKYLIGHT INTEGRATION
10
SKYLIGHT PRODUCTS SHEETS
D1 d-lowering headMain element of the alu and section-breaking beam double fall system. Universal base slab. Weight: 7,6 KgFinishing: hot galvanizing + lacquering
Cod. 500-9898
D2 lowering headMain element of the alu and section-breaking beam single fall system. Universal base slab. Weight: 6,7 KgFinishing: hot galvanizing
Cod. 500-9899
2-ways sliding headLower anchoring element for sliding support2 transverse beamsWeight: 3,6 KgFinishing: electrolytic galvanizing
Cod. 500-8805
U fix headLower screw anchoring element for beam-propWeight: 2,7 KgFinishing: electrolytic galvanizing
Cod. 500-8676
Beam block on propAnchoring element for beam on prop. Weight: 1,0 KgFinishing: electrolytic galvanizing
Cod. 500-8562
2-ways fixed headLower anchoring element for sliding support. Weight: 2,1 KgFinishing: electrolytic galvanizing
Cod. 500-9801
11
Skylight closed panel 160x80Main element for the casting of reinforced concrete base; panel size: cm 160x80. With plywood panel H 9Weight: 18,1 KgFinishing: polyester lacquering
Cod. 500-8941
Skylight closed panel 110x80Main element for the casting of reinforced concrete base; panel size: cm 110x80. With plywood panel H 9Weight: 13,0 KgFinishing: polyester lacquering
Cod. 500-8943
Skylight closed panel 160x55Main element for the casting of reinforced concrete base; panel size: cm 160x55. With plywood panel H 9Weight: 15,1 KgFinishing: polyester lacquering
Cod. 500-8942
Skylight closed panel 110x55Main element for the casting of reinforced concrete base; panel size: cm 110x55. With plywood panel H 9Weight: 9,1KgFinishing: polyester lacquering
Cod. 500-8944
Full compensation capCompensation element on double fall head for reinforced concrete base casting. H 18Weight: 0,2 KgTreatment: raw plastic
Cod. 500-8945
180° compensation capCompensation element on double fall head for reinforced concrete base casting; size: 180° H 18Weight: 0,1 KgTreatment: raw plastic
Cod. 500-8946
90° compensation capCompensation element on double fall head for reinforced concrete base casting; size: 90° H 18Weight: 0,05 KgTreatment: raw plastic
Cod. 500-8947
270° compensation capCompensation element on double fall head for reinforced concrete base casting; size: 270° H 18Weight: 0,1KgTreatment: raw plastic
Cod. 500-8948
12
GRID FE 50X160 D1Main element for decking and casting; size: cm 50x160. Weight: 15,4 KgTreatment: hot galvanizing
Cod. 500-7823
GRID FE 50X160 D2Main element for decking and casting; size: cm 50x160. Weight: 15,4 KgTreatment: lacquering
Cod. 500-7806
GRID FE 50X110 D1Main element for decking and casting; size: cm 50x110. Weight: 10,3KgTreatment: hot galvanizing
Cod. 500-7824
GRID FE 50X110 D2Main element for decking and casting; size: cm 50x110Weight: 10,3KgTreatment: lacquering
Cod. 500-7807
GRID FE 25X160 D1Main element for decking and casting; size: cm 25x160. Weight: 12,3 KgTreatment: hot galvanizing
Cod. 500-7825
GRID FE 25X160 D2Main element for decking and casting; size: cm 25x160. Weight: 12,3 KgTreatment: lacquering
Cod. 500-7808
GRID FE 25X110 D1Main element for decking and casting; size: cm 25x110. Weight: 8,3 KgTreatment: hot galvanizing
Cod. 500-7826
GRID FE 25X110 D2Main element for decking and casting; size: cm 25x110. Weight: 8,3KgTreatment: lacquering
Cod. 500-7810
13
FE COMPENSATION 110Decking compensation and plug element; L: cm 110Weight: 3,4KgFinishing: electrolytic galvanizing
Cod. 500-9502
FE COMPENSATION 160Decking compensation and plug element; L: cm 160
Cod. 500-9501
ALU BEAM L 160 D1Main alu beam element; length: cm 160Weight: 7,1 KgFinishing: phoresis + polyester lacquering
Cod. 500-8064
ALU BEAM L 110 D1Main alu beam element; length: cm 110Weight: 4,7 KgFinishing: phoresis + polyester lacquering
Cod. 500-8063
FE BEAM L110 HEAD COMPENSATIONBeam element with compensation function; L110 + wooden beam 65x95. Weight: 7,9KgFinishing: electrolytic galvanizing + wood fumigation
Cod. 500-8561
FE BEAM L160 HEAD COMPENSATIONBeam element with compensation function; L160 + wooden beam 65x95. Weight: 11,8 KgFinishing: electrolytic galvanizing + wood fumigation
Cod. 500-8559
14
NOTES
15
www.theformwork.it
NOTES
1
2
3
SERVICESSK
-EN
G/09
-13
PLANNINGMade on customers request we customize a right solution to fulfill project target.
TRAININGTraining and upgrade course from basic level up to higher levels, aimed to enable plannings and implementation of the system in full autonomy.
TECHNICAL ADVICEEngineering support for special solutions.
Authorized reseller:
www.fowlerscaff.com.au 9 WALKER PLACE WETHERILL PARK NSW 2164, TEL 9604-8202 FAX 9725-4662
