Upload
doshi78
View
49
Download
2
Embed Size (px)
DESCRIPTION
material detail
Citation preview
Aluminium AW 6063 T6 angleAW 6063 is an aluminium product with very good general corrosion resistance and good weldability features. Used mainlyin very complex cross sections where adequate fatigue strength is required, its suitability for anodising also enables moredecorative use in architectural applications.
Applications:• Architectural sections for windows, doors and curtain walls
• Interior fittings, frame systems, lighting, ladders and railings
• Flexible assembly systems, furniture, office equipment
• Truck and trailer flooring, pneumatic installation, inside applications
• Irrigation pipes
The information on our web site is accurate to the best of our knowledge and understanding. Although every effort has been made to ensureaccuracy, the company cannot accept any responsibility for any direct or indirect damages resulting from possible errors or incorrect
application of the information of this publication. We reserve the right to make changes.
Copyright © 2014 Rautaruukki Corporation. All rights reserved.
Document printed on 10.04.2014 www.ruukki.com
Dimensions
• Material according to EN 5733
• Mechanical properties according to EN 7552
• Tolerances according to EN 7559
• Material certificate EN 10204 / 2.1
From Finland stock
Dimensions mm Theor. weight Roundedh b s kg/m inner angle
20 20 3 0.3
30 15 2 0.23
30 20 2 0.26
35 35 3 0.55
40 20 4 0.6
40 40 2 0.42
60 40 4 1.04
60 40 5 1.29
75 50 6 1.94
80 35 5 1.49 •
80 50 6 2.02
80 80 8 3.32 •
100 50 5 1.96
100 50 6 2.38 •
100 100 10 5.15
120 60 8 3.72 •
130 65 10 5.03 •
150 75 8 4.71 •
From Norway stock (Length L=6m)
For larger dimensions AW 6082 T6 is also available.
Dimensions mm Theor. weight Roundedh b s kg/m inner angle
15 20 2 0.16
Aluminium AW 6063 T6 angle
2
Dimensions mm Theor. weight Roundedh b s kg/m inner angle
20 20 3 0.32
25 25 3 0.4
30 30 3 0.48
30 30 5 0.78
40 40 3 0.64
40 40 4 0.87
40 40 5 1.04
50 30 4 0.86
50 40 5 1.18
50 50 5 1.33
50 50 6 1.61
60 40 5 1.33
60 60 6 1.92
60 50 6 1.87
65 65 6 2.18
65 65 8 2.74
75 50 6 2
75 50 7 2.32
75 50 8 2.7
75 75 8 3.21
75 75 9 3.63
100 50 6 2.42
100 50 8 3.21
100 65 8 3.53
100 75 8 3.7
100 100 10 5.32
130 65 8 4.19
130 75 9 4.94
150 75 9 5.5
150 100 10 6.74
200 100 10 8
Properties
Chemical properties
According to EN 5733
Aluminium AW 6063 T6 angle
3
Element Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Remarks Others/E Others/T Al
Weight % 0.200.6 0.35 0.10 0.10 0.450.9 0.10 0.10 0.10 0.03 Remainder
Mechanical properties
According to EN 7552
Temper Dimensions mm Rm Rp0.2 A % A50 mm
O/ H111 ≤ 200 max 130 18 16
T4 ≤ 150 130 65 14 12
150 < s ≤ 200 120 65 12
T5 ≤ 200 175 130 8 6
T6 ≤ 150 215 170 10 8
150 < s ≤ 200 195 160 10
T66 ≤ 200 245 200 10 8
s = width across flats
Physical properties
Density: 2.70 g/cm3 Specific heat capacity: 898 J/(kgK)
Melting Point: 655°C Thermal Expansion: 23.5 µm/(mK)
Modulus of Elasticity: 69500 MPA Resistivity: 31 nΩm
Modulus of Rigidity: 26100 MPA Thermal Conductivity: 209 W/(mK)
Poisson's ratio: 0.33 Electrical Conductivity: 55.5 %IACS
The content of this document has been created from web page last updated 19 Aug 2013Our sales and technical support are happy to give you more information. Visit www.ruukki.com/contactus.
Aluminium AW 6063 T6 angle
4