Alucobond Technical Data

the face of tomorrow

today

Clockwise from top left:

Crown Promenade Hotel Project- Melbourne

Woodside Plaza- Perth

Qantas First Class Lounge - Sydney

Front Cover:- Auburn Power Centre

quality german

aluminiumcomposite panels

quality german

aluminiumcomposite panels

ALUCOBOND® is a light

composite material consisting of

two aluminium cover sheets and

a core made of polyethylene.

This simple but extremely

versatile product concept has

been developed to provide a

façade material with a host of

distinct advantages for

architects: it is stable and yet

flexible, has a smooth surface

and is available in a number of

standard or individual colours;

it is weather-resistant,

unbreakable, shock-resistant,

vibration absorbent and easy

to install.

anythingis possible withALUCOBOND®

ALUCOBOND® is an

economical synthesis of

aesthetics and function. It is

therefore the ideal material for

suspended rear-ventilated

façades, claddings for roof

edges and fascias.

The advantages of the

ALUCOBOND® technology are

most convincing. That is why

ALUCOBOND® has been widely

used in industry, transport and

display for several decades.

1

HISTORY

With its numerous product

innovations and state-of-the-

art production facilities,

Alcan Singen GmbH has

been a pioneer in processing

aluminium for more than

90 years. Production of

ALUCOBOND® started on a

commercial basis in 1969

and by the turn of the

millennium, 80 million square

metres of this light

composite panel had been

sold worldwide. Since 1969,

building owners and

architects have successfully

chosen ALUCOBOND® as a

versatile construction

material to turn their ideas

into reality and to give

buildings and skylines the

shape of the future.

easy to shapewith a wide choice of colours

QANTAS FIRSTCLASS LOUNGEFeaturing the shimmering

façade of Silver Metallic &

Grey Metallic Alucobond

aluminium composite material,

the Qantas First Class lounge

at Sydney’s International

Airport exhibits all the quality,

lustre and luxury that

passengers have come

to expect.

free technicalsupport

2

HIGH RISE

Individuality and timeless classic styling are

the testimony of ALUCOBOND® to the high-rise

building and refurbishment market. ALUCOBOND®

allows dynamic corporations to really stand out

from the competition by offering almost endless

possibilities of usage options and colour

combinations.

factory pre-finishedfor consistency ofappearanceLOW RISE

The façades of public buildings should be

practical, attractive and in keeping with the

modern civic environment. The wide array of

colours, shapes and detail allows ALUCOBOND®

to enhance the overall beauty and ambience of

any building in any city.

modern

refurbishmentof antiquated structures

The combination of surface finish, colour

options, durability and flexibility of ALUCOBOND®;

all contribute to the restoration of any building, to

create a dramatic landmark. ALUCOBOND® is

also the totally cost effective method, of

contemporary renovation.

lightweight for

easy fabrication and installation

BEFORE AFTER


Cross City Tunnel Exhaust Stack- Sydney

D Bah Apartments - Gold Coast

The Distillery, Jackson's Landing- Sydney

Refurbishment- St Leonards, Sydney

PROVEN QUALITY

ALUCOBOND® is the original

and the world's most widely

recognised aluminium

composite panel.

Manufactured since 1969,

by one of the world's largest

and longest established

aluminium producers,

Alcan Singen GmbH.

ALUCOBOND® has a factory-

applied coil coated PVF2

paint finish; recognised and

proven worldwide as the best

architectural coating available

today for all climatic and

environmental conditions.

ALUCOBOND® is very cost

effective, even in the most

complex situations.

Since 1976, numerous

prestigious projects have

been carried out in Australia

using ALUCOBOND®.

COLOURS

Available in 30 standard

colours, the majority of which

are kept in stock locally.

Also available in a range of

44 complementary colours:

minimum order quantity of

2000m2applies.

WIDE RANGE OF SIZES

ALUCOBOND® is available

in a wide range of sheet sizes

and thicknesses.

FEATURES & APPLICATIONS

ALUCOBOND® is lightweight,

extremely flat and rigid.

ALUCOBOND® has excellent

vibration dampening

characteristics.

ALUCOBOND® can be bent,

curved or shaped to any

required angle.

ALUCOBOND® can be used

as a fascia, as a cladding

panel, for interiors or signage.

ALUCOBOND® is ideal to fit

into any curtain wall system.

PROMPT DELIVERY

Substantial stocks of

ALUCOBOND® are kept at our

warehouses in Melbourne,

Sydney and Brisbane.

TECHNICAL SUPPORT

Free technical support and

backup is available. Just call

the ALUCOBOND® office

nearest to you.

AUSTRALIA'S MOST POPULAR COMPOSITE PANELONLY AVAILABLE FROM

ALUCOBOND ARCHITECTURAL PTY LIMITED

why useALUCOBOND®?

4


Cummins Building- Caribbean Gardens,

Melbourne

IBM Tower - Singapore

Country Road Store - Melbourne

Western Australian MaritimeMuseum - Fremantle

Bridabella Circuit - Canberra

CANOPIES & AWNING

When image is a number one priority and

consumer recognition paramount, ALUCOBOND®

provides the answers for both interior and exterior

applications. Lightweight yet strong,

ALUCOBOND® is the ultimate material for today's

requirements with the durability to retain its sleek

good looks long into the future.

large panelsfor less joints and a

clean lookOTHER FINISHES

ALUCOBOND® Spectra Colours have

been manufactured to cleverly reflect and refract

natural light into the millions of luminescent

colours of the rainbow, offering different

enchanting colour effects depending on the

angle of view.

ALUCOBOND® naturAL finishes amplify the

natural beauty and character of aluminium to

enhance the design of your architectural project.

The finely textured aluminium surface scatters

light for a close-up visual effect, while retaining the

look and lustre of smooth aluminium from afar.

5

exceptional

strengthfor resistance to blows andbreakage

6

ProductInformationALUCOBOND® is a composite panel consistingof two aluminium cover sheets (0.5mm thick)and a polyethylene core.

It is produced with various core thicknesses in acontinuous process.

Mechanical PropertiesThe composite materialis rigid, resistant toblows, breakage andpressure and has highbending, buckling andbreaking strengths.

The strength is determined by the 0.5mm thickaluminium cover sheets in Peraluman-100, EN AW-5005A (AIMgI), acc to EN 485-2.

Tensile strength: Rm ≥ 130N/mm²0.2% proof stress: Rp0.2 ≥ 90N/mm²Elongation: A5.0 ≥ 5%Modules of elasticity: E = 70000N/mm²

Since the cover sheets determine the bendingstrength, the core material can be disregardedwhen calculating the bending tension.

Alucobond Architectural can provide structuralanalysis using computer calculations based onthe Finite Element Method.Thickness Weight (kg/m²)3mm 4.54mm 5.56mm 7.3

AcousticalPropertiesSound insulation

(acc. TO DIN 4109)

Panel Average airbornethickness transmission loss R3 mm 24 dB4 mm 25 dB6 mm 26 dB

(Frequency range 100-3200Hz)

Sound absorption(acc. To EN20354)Sound absorption factor asAverage = 0.05 for all panel thicknesses.

Vibration dampening(acc. To EN ISO 6721)

Panel Loss factor dthickness (frequency 200Hz)3 mm 0.00724 mm 0.00876 mm 0.0138

The loss factor of ALUCOBOND® is about 6times better than that of a solid aluminium sheet.

Fire BehaviourThe non-combustiblealuminium cover sheetsprotect the plastic core.

Australia

AS 1530, Part 3 - Indicative results:Ignitability Index 0Heat evolved Index 0Spread of flame Index 0Smoke developed Index 0

United States of America:

ASTM E84:Flame spread 0Fuel contribution 0Smoke density 0UBC 17-5: meets test criteria

Germany

DIN 4102 Class B2

United Kingdom

BS 476, Part 6 index 0 Class 0BS 476, Part 7 Class 1 (Bldg.Regul.)

SurfacesStove-lacquering

With ALUCOBOND®

stove-lacquering,customers can choosefrom a wide range of standard and metalliccolours or select any type of special individualcolour. High quality lacquering systems withoptimum resistance to weather and industrialpollution are used exclusively. These propertiesare achieved by using fluorinated bondingagents; for standard finishes PVF2 or FEVE-based top lacquers are used. Special surfaceeffects are achieved on request by usingduroplastic fluoropolymers which are virtually asweather resistant as PVF2 and FEVE lacqueringsystems.

Anodising

DIN 17611 standards determine the criteria foranodised finishes (E6/EVI), minimum thicknessof the anodic layer 20 microns, corresponding toBS 1615: 1972 AA20.

PLEASE NOTE

When working with Natural AnodisedALUCOBOND® that the sheets have rack marksat each end of the panel where they have beenheld while being anodised. This mark extends25mm in from each end of the panel on bothsides and must be trimmed prior to fabrication.These marks are covered by the protective foiland are not obviously visible.

PVC TapesThe application of PVC type tapes, Silicone orPolyurethane sealants to the PE protective foil ordirectly to the painted surface of ALUCOBOND®

is not recommended. Plasticizers and/orsolvents contained within these products couldaffect the painted surface resulting in a localisedchange in gloss level.

ThermalInsulatingPropertiesDue to its relatively thinand homogenous core

ALUCOBOND® is not an insulating panel,however in certain instances its insulatingproperties can be considered.

Thermal expansion

This is effectively controlled by the aluminiumcover sheets. Actual linear expansion2.4mm/m/100◦C.

Temperature resistanceFrom -50◦C to + 80◦C.

Product RangeOne side stove-lacquered finishcolours:

Refer to Colour Chart

Thickness : Standard 4mmFor special application3mm, 6mm

Standard Width : 1000, 1250, 1500, 1575mm

Special Width : min 875mm max 1750mm(subject to min 2000m² per width)

Standard Length : 2500, 3200, 4000mm

Special Length : to customer's specification max 8000mm

Available stock in Australia

For available colours and sheet sizes refer to ourStandard Range.

Other surfaces on request:

Both sides mill-finishBoth sides stove-lacqueredBoth sides clear anodised

Dimensional tolerances (rounded)

Thickness mill finish resp.stove lacquered± 0.2mm

Width -0/+4mmLength 1000-4000mm -0/+6mm

4001-8000mm -0/+12mm

Alucobond is produced in a continuous and fullyautomated process; this process introducesdimensional tolerances and factory edges thatrequire the panels to be trimmed on all 4 edgesprior to installation. Alcan Composites andAlucobond Architectural do not recommendinstallation of untrimmed Alucobond panels

StorageProtect pallets during storage against rain,penetration of moisture or condensation

Pile pallets in stacks one on top of the other (do not place the panels in an upright position);stacks must not comprise more than 6 pallets ofidentical size. Avoid storage for a period of morethan 6 months.

}

Thermal Heat transmittancePanel resistance coefficientthickness 1/ = R U-value[mm] [m² K/W] [W/(m² K)]3 0.0069 5.654 0.0103 5.546 0.0172 5.34

7

FabricationCuttingALUCOBOND® can be cutwith a vertical panel saw,circular or jig saw.Conditions for cutting witha circular saw: Cutting tools/carbide tipped, blade geometry:Thickness of cutting teeth approx. 2-4mm;Tapered from outside to inside to prevent jamming.Tooth geometry: Trapeze tooth/flat toothPitch t:10-12mmClearance angle : 15°Rake angle : 10° (positive)Max cutting speed v: 5000 m/min.Max feed s: 30 m/min.

DrillingALUCOBOND® can bedrilled with twist drillsnormally used foraluminium and plasticson machines common for metals. Drill material:High-speed steel (HSS) We recommend metaldrills with centre-point.

Contour cuttingALUCOBOND® can becut to shape using CNCmachining centres,water jet cuttingmachines, copy routers and jig saws.

ShearingShearing can be donewith a guillotine.

To prevent surfacedamage, use protectivepads between down-holders and ALUCOBOND®

surface and adjust to minimum down holding pressure.

Use carpet protection on feeder table. Do not useball supports as they damage the ALUCOBOND®

surface. Shearing will cause a slight deflection ofthe cut edge on the impact side.

PunchingALUCOBOND® can bepunched usingconventional sheet metalpunching machines ormanual notchers. For clean cuts use sharp toolsand dies with minimal cutting clearance.

Punching will cause a slight deflection of the cutedge on the impact side.

BendingBending is possible witha folding table or abending press. Minrequired inside radius:ALUCOBOND®: r = 10 x tt = panel thickness

To protect the surface finish of ALUCOBOND®

during bending use padding strips. The spring-back of ALUCOBOND® is greater than that of asolid aluminium sheet.

To determine spring-back for serial production,make tests on sample panels.

Roll BendingALUCOBOND® can bebent using a roll bendingmachine (pyramid orpinch rollers).

To protect the surface finish of ALUCOBOND®

during bending use only polished rollers free ofdents and other defects.

RivetingRiveting is possibleusing solid or blindrivets withconventional rivetingtool. For exterior applications allow for thermalexpansion and possible building movements.

WeldingThe plastic core ofALUCOBOND® can behot-air welded usingconventional hot-airwelding equipment and plastic filler rod. Hot-airwelding provides a water-tight joint for decorativepurpose only. It is not suitable for joints wherestructural strength is required.

ScrewingUse conventional wood,sheet-metal or machinescrews made ofstainless steel.

For exterior applications allow for thermalexpansion and possible building movements.

ClampingWith serrated corner-joint or butt-jointsections or clampedbetween specialaluminium extrusions

BondingFor exterior use andstructural applications:

Adhesive sealingcompounds

Double-sided VHB tapes

Consult sealant manufacturer for correct application.For interior applications:

Metal adhesives

Double-sided VHB tapes

Adhesives and sealants do not adhere to theplastic core. Apply to the aluminium cover sheet only.

Routing& FoldingALUCOBOND® panelscan be shaped cold bya very simple techniqueby hand or panel saws,then folding to producevarious shapes andsizes. Rout a groovealong the folding edgeusing a disk or end-milling cutter. 0.3mm of corematerial should remain at the base of the groove.The panel can then be folded by hand.

Cleaning &MaintenanceThe frequency ofcleaning depends largelyon the design, the location of the building and thedegree of soiling. For further information pleasecontact your nearest ALUCOBOND® office.

Cleaning agents

Please do not use any powerful alkaline cleaningagents such as potassium hydroxide, sodiumcarbonate or caustic soda, or any powerfulacidic products or heavily abrasive scouringagents such as Vim, Ajax or lacquer-dissolvingcleaning agents.

Removing graffiti

It is possible to remove graffiti fromALUCOBOND® panels. Please ask for details.

FIXED CASSETTE SILICONE BUTT JOINT/FLAT STICK SUSPENDED CASSETTE ALUCOFIX

EXAMPLES OF FIXING METHODS

8

coloursALUCOBOND® and ALUCORE® are now available in 30 standardcolours and 44 pre-formulated colours. Custom colours are availableon request.

The fluorocarbon (i.e. PVF2) coating is applied to the aluminium coilprior to lamination into a composite panel, using a continuous coilcoating process, which is based on the latest technology. The multiplelayers are individually stoved at temperatures of between 200-260º C.The quality of the coating is tested according to standards establishedby E.C.C.A (European Coil Coating Association) of which ALCAN is amember. Fluorocarbon (i.e. PVF2) coating systems combine goodformability and excellent surface durability. They are extremelyresistant against weathering, strong solar radiation and pollution attack.

Due to different production processes being applied for ALUCOBOND®,ALUCOBOND® A2, ALUCOBOND® Plus and ALUCORE®, slight colourvariations may occur between different products. If colour consistencyis required do not mix different products.

Solid Colours

No matter whether a soft white or a vibrant red is selected, solidcolours are always a good choice when a uniform appearance withoutspecial effects is required. The gloss of solid colours is between 30-40% according to Gardner scale.

Metallic Colours

The different appearance of colour and gloss under various lightconditions and viewing angles gives these surfaces a vivid impressionand brings them to life. The gloss of metallic colours is between 30-40% according to Gardner Scale.

Special Effect Colours / Spectra Colours & naturAL Finishes

These eye-catching finishes applied using the same coil coatingprocess are the result of continuous development of new paintsystems and provide evidence of Alcan's know-how and competencyin the latest coating technology.

Unless specified, the gloss level of these specialised finishes arebetween 70 - 80% according to Gardner Scale.

DIBOND® Colours

DIBOND®, the market leader among display panels, is available in arange of standard colours - incorporating the reliable polyester lacquersystem and the classical product features of DIBOND®.

The new colour range offers more creative possibilities for applicationsrequiring coloured background in the design and usage of exhibitionstands, nameplates, signage and display panels as well as many otherfields of use.

This results in additional combinations for more individual solutions.

protectivepeel-off foilUnless otherwise specified ALUCOBOND® is supplied with a factory appliedpeel off foil for protection of the coated surface. Removal of the protective foilis recommended as soon as possible after installation.

In hot weather conditions, some residual glue may stick to the stove-lacqueredpanel surfaces. Please ask for specific instructions for removal.

PVC tapesThe application of PVC type tapes, Silicone or Polyurethane sealants to the PEprotective foil or directly to the painted surface of ALUCOBOND® is notrecommended. Plasticizers and/or solvents contained within these productscould affect the painted surface resulting in a localised change in gloss level.

directional colourappearanceTo avoid possible reflection differences (for metallic colours only), it isrecommended that panels be installed in the same direction - i.e. with theorientation of the marking shown on the peel-off-foil of the individual panelsrunning parallel to each other.

sustainabilityozone friendlyThe production, application and long-term use of ALUCOBOND® produces novolatile CFC propellants.

ALUCOBOND® core material does not contain nitrogen, chlorine or sulphur.ALUCOBOND® is the natural choice for a huge variety of projects whileactively protecting the environment.

life cycleDuring decades of use in a rear-ventilated cladding system, ALUCOBOND®

protects the building from weathering and the harmful effects caused byindustrial and environmental pollution.

Advantages: Lower maintenance costsLong-term preservation of the building structure

An external cladding system using ALUCOBOND®, acts as a barrier againstsolar radiation. The ventilation space between the ALUCOBOND® panellingand the wall or thermal insulation aids in reducing heat transmission.

recyclingALUCOBOND® is fully recyclable, i.e. both the core material and the aluminiumcover sheets can be recycled and used in the production of new material.

colour change gloss retention

corp

orat

eid

entit

y

9

corp

orat

eid

entit

y

ALUCOBOND ARCHITECTURAL PTY LTD A Subsidiary of Halifax Vogel Group

ALUCOBOND®, ALUCORE® and DIBOND® are manufactured by Alcan Singen GmbH, D-78221 Singen / Germany

ALUCORE® is renowned for its strength and

durability, due substantially to its unique

honeycomb core. Ideal applications include

building façades, floor construction, canopies

and roof features.

10

DIBOND®'s characteristics have no creative limits.

Excellent flatness and an unsurpassed smooth

finish make DIBOND® the ideal material for

interiors and corporate signage. It provides a

perfect surface for screenprinting and as a base

for painting and laminating.

email: [email protected] website: www.alucobond.com.au

Contact usVICTORIA

58 - 70 Hampstead Road

Maidstone VIC 3012

Telephone (03) 9319 3700

Facsimile (03) 9318 6533

NEW SOUTH WALES

29 Henderson Street

Turrella NSW 2205

Telephone (02) 8525 6900

Facsimile (02) 9556 6066

QUEENSLAND

128-132 Mica Street

Carole Park Qld 4300

Telephone (07) 3718 2360

Facsimile (07) 3718 2399

Alucobond Architectural Pty LtdStandard Range

July 20092500 3200 4000 2500 3200 4000

Colour x x x x x x Other1250 1250 1250 1575 1575 1575

Silver Metallic 500

Smoke Silver Metallic 501

Grey Metallic 502

Champagne Metallic 503

Colour Code

Bronze Metallic 504

Sunrise Silver Metallic 600

Brillian Metallic 602

White 16 101

Dark Grey Metallic 505

Anthrazit Grey 105

White 10 100

Black 326

Indiana Copper 704

Sparkling Black Metallic 888

Red 201

Ultramarine Blue 203 Ultramarine Blue 203

Gold Metallic 601 Gold MetallicGrey Blue Metallic 603

Seafoam Green Metallic 604

Cream 102

Light Grey 104

Lemon 200 Lemon 200

Ruby 202

Dark Blue 323

Beige 103

Clear Anodised EV/E6-1

NaturAL Brushed 400

Grey Brown 337

Yellow Green 313

Orange IOL 4000 x 1450

Type

Platinum White both sides F-10

Platinum White both sides I-20

Whilst we endeavour to stock sufficient material to service most project orders with a minimum of delay, due to demand there may be times when stock is not immediately available. It is therefore adviseable to check availability of colour and sheet size prior to specifying or ordering.

3050 x 1500

Alucobond Architectural Pty LtdA Subsidiary of Halifax Vogel Group

Melbourne Sydney Brisbane Perth

58-70 Hampstead Road 29 Henderson Street 128-132 Mica Street 24-26 Drynan Street

Maidstone Vic 3012 Turrella NSW 2205 Carole Park Qld 4300 Bayswater WA 6053

Phone: 03 9319 3700 Phone: 02 8525 6900 Phone: 07 3890 2944 Ph: 1300 700 917

E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

Fax: 03 9318 6533 Fax: 02 9556 6066 Fax: 07 3890 4882 Fax: 1300 658 889

when stock is not immediately available. It is therefore adviseable to check availability of colour and sheet size prior to specifying or ordering.

ALUCOBOND® Wood Design unifies the aesthetic beauty of wood with the strength of ALUCOBOND®

International Contacts - Internationale Kontakte

GermanyALCAN COMPOSITESAlcan Singen GmbHD-78221 Singen / GermanyPhone: +49 77 31 80 73 31Fax: +49 77 31 80 28 [email protected]

North / Central AmericaAlcan Composites USA Inc.208 W. 5th StreetP.O. Box 507Benton, KY 42025-0507 / USAPhone: +1 270 527 4200Fax: +1 270 527 [email protected]

Asia / PacificAlcan Alucobond (Far East) Pte. Ltd.73 Bukit Timah Road#06-01 Rex HouseSingapore 229832Phone: +65 6501 1160Fax: +65 6501 [email protected]

IndiaAlcan Composites India Pvt LimitedUnit 321, Building 3, 2nd FloorSolitaire Corporate ParkMumbai 400093 / INDIAPhone: +91 22 4005 4500Fax: +91 22 4010 [email protected]

ALCAN COMPOSITES - A true „global player“• Sales offices and production plants in Europe, North and South America and Asia

• Widest range of composite panels• Partnerships with leading distributors• Excellent technical and commercial service

ALCAN COMPOSITES - Ein echter „global player“• Verkaufsbüros und Produktionsstätten in Europa, Nord- und Südamerika und Asien

• Größte Plattenvielfalt• Partnerschaften mit führenden Distributoren• Professioneller Vertriebs-Service und technische Unterstützung

For more information about our products visit:www.alucobond.com or contact your nearest ALUCOBOND® distributor.

Für mehr Informationen über unsere Produkte besuchen sie:www.alucobond.com oder ihren zuständigen ALUCOBOND® Vertreter.

Europe / Middle East / AfricaALCAN COMPOSITESAlcan Singen GmbHD-78221 Singen / GermanyPhone: +49 77 31 80 34 17Fax: +49 77 31 80 28 [email protected]

South AmericaAlcan Composites Brazil Ltda.Av. das Nações Unidas12551 - 11˚ floor - 1106Saõ Paulo - SP / BrazilCEP 04578000Phone: +55 11 3043 7611Fax: +55 11 3043 [email protected]

ChinaAlcan Composites Ltd. Shanghai298 East Kangqiao RoadKangqiao Industrial Zone, Pudong Area201319 Shanghai / CHINAPhone: +86 21 5813 5353Fax: +86 21 5813 [email protected]

Printed in Italy

G&

15/10/20

08 G

B/D

G

Wood Design

Advantages• Weather resistant • No colour change• No rotting • Moisture resistant• No repainting • Insect proof
















Printed in Italy

G&

15/10/20

08 G

B/D

G

Wood Design


ALUCOBOND® Wood Design finishes unify thenatural beauty of wood and the outstanding features of ALUCOBOND® aluminium compositepanels to enhance the design of your architecturalproject.

ALUCOBOND® Wood Design is available in 5modern wood patterns. It offers the sameunequalled material properties for which all ALUCOBOND® products are known: extraordinaryflatness and rigidity, excellent formability, lowweight and outstanding weather resistance. The use of a high quality paint system applied in a continuous coil-coating process ensures that thewood look is not compromised for many decades to come.

ALUCOBOND® Wood Design surfaces are easyto clean and care for, unlike real wood. It is theideal material for Interior and Exterior Architecture,and just another reason why ALUCOBOND® is“The World’s Favourite Aluminium CompositeMaterial”.

Selecting ALUCOBOND® Wood Design for projects which require environmental friendly materials is literally a natural choice, ALUCOBOND® is fully recyclable.

ALUCOBOND® Wood Design vereint die natürliche Schönheit von Holz mit denaussergewöhnlichen Anwendungsmöglichkeitenvon ALUCOBOND® Aluminium Verbundplatten undverleiht ihrem Architektur Projekt ein edles undlebendiges Aussehen, ob an Portalen, Säulen,Pylonen, Fassaden oder im Innenausbau.

Erhältlich in 5 neuen und modernen Oberflächenbietet ALUCOBOND® Wood Design alle Stärken,für die alle ALUCOBOND® Produkte bekannt sind:Exzellente Planheit, hohe Biegesteifigkeit, geringesGewicht, ausgezeichnetes Verformungsverhaltensowie eine hervorragende Langzeit- undWitterungsbeständigkeit. Der Einsatz hochwertigerLacksysteme im Bandlackierverfahren garantiert,daß das Holzdekor auch nach Jahrzehnten sein frisches Aussehen erhält.

ALUCOBOND® Wood Design Oberflächen sindästhetisch, einfach zu verarbeiten und zu verformenund im Gegensatz zu Echtholz langlebig, leicht zureinigen und zu pflegen.

ALUCOBOND® Wood Design bietet erhöhtenBrandschutz, ist umweltfreundlich, vollständigrezyklierbar und entspricht damit den heutigenhohen Anforderungen im Bereich Umweltschutz.

NoteIt is recommended that all ALUCOBOND® WoodDesign panels required for a project or an elevation of a project originate from the same production batch. Furthermore, panels should beinstalled in the same direction as marked on theprotective peel-off foil. As for real wood, however,it is not possible to ensure a 100% uniformity incolour, pattern and brightness.

For more information and available specificationplease refer to the manufacturer or your nearestALUCOBOND® representative.

HinweisWir empfehlen ALUCOBOND® Wood DesignPlatten stets aus einer Produktionscharge einzusetzen bzw. Gebäudeansichten nur mit einerCharge zu bekleiden. ALUCOBOND® Platten sollten entsprechend den Richtungspfeilen auf derSchutzfolie montiert werden. Wie bei Echtholz kannauch bei ALUCOBOND® Wood Design eine 100%Farb-, Dekor- oder Helligkeitsübereinstimmung nichtgarantiert werden.

Nähere Informationen und verfügbareSpezifikationen erhalten Sie direkt vom Herstelleroder Ihrem zuständigen ALUCOBOND®

Gebietsverkaufsleiter.

Royal Cedar 852

Elegant Oak 853

Manitoba 854

Redwood 851

Dark Zebrano 850














Royal Cedar 852

Elegant Oak 853

Manitoba 854

Redwood 851

Dark Zebrano 850














Royal Cedar 852

Elegant Oak 853

Manitoba 854

Redwood 851

Dark Zebrano 850
















Printed in Italy

G&

15/10/20

08 G

B/D

G

Wood Design


Documents

Alucobond Technical Data