Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
April 2011
Alternative commissioning method for AspiraVision DALI drivers
April 2011 2
Program short-address in all drivers, via the DALI-controller*STEP: 1
* AspiraVision DALI drivers work with all DALI compliant controllers
April 2011 3
Switch-off all lamps and wait 15 minutes for lamps to cool downSTEP: 2
April 2011 4
Switch-on driver with address 0 (lowest address) and locate the lampSTEP: 3
April 2011 5
Address 0
Mark address of driver and lamp on mapSTEP: 4
April 2011 6
Switch-off driver with address 0 (lowest address)STEP: 5
April 2011 7
Switch-on driver with address 1 and locate the lamp STEP: 6
April 2011 8
Address 1
Mark address of driver and lamp on mapSTEP: 7
April 2011 9
Switch-off driver with address 1STEP: 8
April 2011 10
Address 11
Address 4 Address 9
Address 10Address 0Address 2
Address 3 Address 6 Address 7
Address 5 Address 8 Address 1
Repeat step 6-8 until all lamps are located and marked on mapSTEP: 9
April 2011 11
Group the lamps according light plan. Create scenes and required dim-levels.STEP: 10