Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
EMERGENCY EXIT SIGNAGE GUIDANCE
All our Eterna Emergency Exit Signage comply with current Exit Signage Regulations
using the Signs Directive format.
4 Our Eterna legends fulfil the legal and technical requirements for exit signs
4 Extensions to existing installations should be made in the same format as originally installed
4 Up arrow option available for all models
For installations requiring ISO 7010 format legends contact our sales team for more information
PAG
E 28
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
LED EMERGENCYLIGHTING
All our Emergency Lighting products comply with the BS EN 60598-2-22 Emergency Lighting Standard.
All products in this section have 5 year warranties available
ETERNAPRO 5 YEAR WARRANTYn LED Emergency Battens + High Output Versions Page 30n LED 5ft Twin Slimline Emergency Ceiling Fitting Page 30n LED Single Or Twin Weatherproof Fittings Page 30n LED Colour Selectable Carina Lights Page 31n LED Circular Or Square Utility Lights Page 32n LED Full, Eyelid Or Grill Aluminium Wall Lights Page 33n LED Non Maintained Emergency Downlight Page 34n LED Maintained Recessed Emergency Fittings Page 34n LED Emergency Hanging Exit Sign Light Page 35n LED IP65 Twinspot Emergency Light Page 35n LED IP20 Emergency Twinspot Fitting Page 35n Emergency Battery Pack For RDL Range & LED Panels Page 35n LED Slim Maintained Emergency Exit Box Page 36n LED Maintained Emergency Exit Box Sign Page 36n LED Maintained / Non Maintained Emergency Bulkheads Page 36
EternaPro
Extended WarrantyAvailable on application
PAG
E 29
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
5FT LED TWIN SLIMLINE EMERGENCY CEILING FITTINGWhite / 50W / 4000K / 5000 lm / 40,000 hrs
EternaPro
Extended WarrantyAvailable on application
A slim, modern design LED ceiling fitting which offers a more stylish alternative to traditional battens. Where a more aesthetically pleasing fixture is desirable this versatile and elegant light source is suitable for commercial, retail and domestic applications. • Polycarbonate and aluminium construction• Push terminal connections• Pre-wired for easy installation• Minimum 3 hour functionality in emergency mode• LED glows green in standby mode and super
bright white light in the event of a mains failure• 118 lumens in emergency mode• See PAGE 44 for non emergency version• M.O.M: 1 / O.P.Q: 6 12
7mm
1503mm (5ft) 43mm
Emergency module glows green in standby mode
Bright white glow in emergency mode
Code
ELEGAN5EM3
IP20 LED 5FT / 6FT BATTENS + HIGH OUTPUT VERSIONSALL FITTINGS: White / 4200K / 35,000 hrs / IP20
• Pressed steel body and polycarbonate diffuser• LED tray can be removed from the housing for
easy installation• 20mm knockout glands at each end for through
wiring options• BESA box mounting • Gear tray retaining straps• Push terminal connections• Pre-wired for easy installation• LED glows green in standby mode and super
bright white light in the event of a mains failure• Minimum 3 hour functionality in emergency
mode• 118 lumens in emergency mode• See PAGE 43 for non emergency versions• M.O.M: 1 / O.P.Q: 6
5FT (1460mm)6FT (1730mm)
60mm
73m
m
Code Version Wattage LuminaireLumens
STANDARD OUTPUT LED BATTENS
LBAT5FTEM3 5FT 38W 4800 lm
LBAT6FTEM3 6FT 48W 6000 lm
HIGH OUTPUT LED BATTENS
LBAT5HOEM3 5FT 65W 7900 lm
LBAT6HOEM3 6FT 70W 8600 lm
IP65 LED SINGLE/TWIN 5FT EMERGENCY WEATHERPROOF FITTINGSBOTH FITTINGS: Grey / 5000K / 30,000 hrs / IP65
Superb one for one replacement for traditional fluorescent fixtures. • Polycarbonate housing and diffuser• Multiple fixing options - supplied with surface
mounting brackets and suspension hooks• Gear tray retaining strap for easy installation• IES files available• Stainless steel clips • Push-fit terminal block• 3 hour duration maintained operation: facility
for non-maintained mode or remote switching• See PAGE 45 for non emergency versions• Single = M.O.M: 1 / O.P.Q: 6• Twin = M.O.M: 1 / O.P.Q: 4
Code Version Wattage LuminaireLumens
WPLEDEM351 Single 5ft 30W 3000 lm
WPLEDEM352 Twin 5ft 60W 6000 lm
1560mm (5ft) Single:90mmTwin:
135mm
95m
m EternaPro
Extended Warranty
Available on application
60mm 46mm
50m
m
Emergency BoxEternaPro
Extended Warranty
Available on application
Full photometric data available to enable lighting designs. Light output is equivalent or superior to traditional fluorescent battens.
PAG
E 30
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
IP65 LED EMERGENCY COLOUR TEMPERATURE SELECTABLE FITTINGSALL FITTINGS: 17W / 35,000 hrs / IP65 / A Rated
3100K • 1250 lm 4200K • 1350 lm 6400K • 1300 lm
Code ColourSTANDARD EMERGENCY
CSLEDCREM3 Polished ChromeCSLEDWHEM3 White
ON/OFF MICROWAVE SENSOR + EMERGENCY
MSCSLCREM3 Polished ChromeMSCSLWHEM3 White10% STEP DIM (CORRIDOR MODE)
MICROWAVE SENSOR + EMERGENCY
SDCSLCREM3 Polished ChromeSDCSLWHEM3 White
EternaPro
Extended WarrantyAvailable on application
ALL FITTINGS:• Colour temperature selectable - options of 3100K, 4200K & 6400K easily
set by a dip switch on the gear tray• Full circular LED array • Polycarbonate construction • IP65, ceiling or wall mounted• Plug in connector between the terminal block and the gear tray. Terminal block is located on the
base, allowing for easy wiring and the gear tray to be removed during installation• See PAGE 21 for non emergency versions• M.O.M: 1 / O.P.Q: 8
EMERGENCY VERSIONS:• 3 hour maintained mode as standard which can also be configured for non maintained operation
STANDARD ON/OFF MICROWAVE SENSOR VERSIONS:• Adjustable microwave sensor: with options to adjust 2-50 lux or disable, detection range 10-100%
and time 5 secs - 15 mins• The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no
compromise to the appearance of the fitting or the room design
STEP DIM (CORRIDOR MODE) MICROWAVE SENSOR VERSIONS:• Operation at 100% light level after last presence detection, reducing to 10% light output after
installer selected time delay• Delay time to 10% operation adjustable: 5 sec 30 sec 1 min 5 min 15 min 30 min• 30~150° detection angle• 12~18m adjustable detection range: 100% 75% 50% 25% 10%• Daylight sensitivity adjustment: 2Lux 5Lux 10Lux 30Lux 50Lux Photocell Disable• Detection is possible through doors, glass panels and thin walls
110m
m
325mm
= ON = OFF
Standard shown
PAG
E 31
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
IP65 LED EMERGENCY UTILITY FITTINGS WITH OPAL / PRISMATIC DIFFUSERALL FITTINGS: 18W / 4000K / 35,000 hrs / IP65 / A+ Rated
• Hinged gear tray• Captive fixing screws• Four 20mm cable entries on the side and one to the rear• See PAGE 22 for non emergency versions
EMERGENCY VERSIONS:• 3 hour maintained mode as standard which can also be
configured for non maintained operation
MULTI-FUNCTION MICROWAVE SENSOR VERSIONS:• Detection sensitivity adjustable - 10/50/75/100%• Daylight sensor adjustable - 5/15/50 Lux/Disable• Mounting height - maximum 6mtr• Detection zone - maximum 16mtr diameter x 6mtr height• Detection angle - 150° (wall mounted), 360° (ceiling mounted)
MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: • Standard On/Off Mode: operation at 100% light level then off
after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes
• “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level
• “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off
High output, energy saving utility LED wall / ceiling fixtures with standard, emergency & multi-function microwave control versions. Both opal & clear versions are available for either smooth diffused effect or maximum light output. Diffusers are supplied not fitted to bases and fully captive diffuser fixing screws are utilised to save installation time. Multi-function microwave versions provide the best in flexibility & energy saving options.
Code Version Diffuser +Lumens
CIRCULAR FITTINGS
CIROPALEM3 Standard Emergency Opal1400 lmCIROPALMW3 Multi-function MW Sensor + Emergency
CIRPRISEM3 Standard Emergency Prismatic1600 lmCIRPRISMW3 Multi-function MW Sensor + Emergency
SQUARE FITTINGS
SQOPALEM3 Standard Emergency Opal1400 lmSQOPALMW3 Multi-function MW Sensor + Emergency
SQPRISEM3 Standard Emergency Prismatic1600 lmSQPRISMW3 Multi-function MW Sensor + Emergency
CIR:
Ø 2
90m
mSQ
U: 2
50m
m
100mm
Prismatic circular diffuser
FULLCIRCULAR/ SQUARE
LED ARRAY
Opal square diffuser
Captive fixing screws
EternaPro
Extended Warranty
Available on application
Push fit terminal block
Opal circle
Prismatic square Prismatic circle
Opal square
Multi-function MW Sensor
PAG
E 32
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
IP65 LED EMERGENCY FULL, EYELID OR GRILL ALUMINIUM WALL LIGHTSALL FITTINGS: 18W / 4200K / 35,000 hrs / IP65 / A+ Rated
Code Colour Version LuminaireLumens
FULL
ALEM3BKFUL BlackEmergency
1400 lmALEM3WHFUL White
ALMF3BKFUL Black Multi-function MW Sensor + EmergencyALMF3WHFUL White
EYEL
ID
ALEM3BKEYE BlackEmergency
1300 lmALEM3WHEYE White
ALMF3BKEYE Black Multi-function MW Sensor + EmergencyALMF3WHEYE White
GRI
LL
ALEM3BKGRI BlackEmergency
1400 lmALEM3WHGRI White
ALMF3BKGRI Black Multi-function MW Sensor + EmergencyALMF3WHGRI White
Modern and robust design with options including full, eyelid and grill case, black and white finish, and standard, emergency, multi function
microwave and multi function microwave emergency.
Full
Eyelid
Grill
ALEM3WHGRI shown
ALEM3BKFUL shown ALEM3WHEYE shown
Ø 365m
m
FULL: 100mmEYE: 120mm
GRILL: 130mm
• Die-cast aluminium base and bezel • Polycarbonate diffuser• Full circular/eyelid LED array• Plug in connector between the terminal block and the gear
tray. Terminal block is located on the base, allowing for easy wiring and the gear tray to be removed during installation
• Four 20mm cable entries• Tamper-proof, captive, stainless steel allen key screws• See PAGE 23 for non emergency versions• M.O.M: 1 / O.P.Q: 1
EMERGENCY VERSIONS:• 3 hour maintained mode as standard which
can also be configured for non-maintained operation
MULTI-FUNCTION MICROWAVE SENSOR VERSIONS:• Detection sensitivity adjustable - 10/50/75/100%• Daylight sensor adjustable - 5/15/50 Lux/Disable• Mounting height - maximum 6mtr• Detection zone - maximum 16mtr diameter x 6mtr height• Detection angle - 150° (wall mounted), 360° (ceiling mounted) MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: • Standard On/Off Mode: operation at 100% light level then off
after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes
• “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level
• “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off
EternaPro
Extended Warranty
Available on application
Standard push fit terminal block
PAG
E 33
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
IP20 LED 1.4W NON MAINTAINED EMERGENCY DOWNLIGHT
LED MAINTAINED RECESSED EMERGENCY FITTINGS
Matt Silver or White Trim / 1.4W
BOTH FITTINGS: White / 6500K / 18,000 hrs
This LED compact recessed emergency light is ideal for use in corridors, stairwells and other places that require a smart, discreet emergency unit. • Aluminium construction • Compact design• Matt silver and white trims included• Pre-wired for easy installation• LED glows green in standby mode and super
bright white light in the event of a mains failure• Excellent alternative to a converted downlight• Minimum 3 hour functionality in emergency mode• 118 lumens in emergency mode• 32mm diameter hole cut out size• M.O.M: 1 / O.P.Q: 20
45mm 33mm
2 XCOLOUR
TRIMSINCL.
Actual size: Ø 45mm
EternaPro
Extended WarrantyAvailable on application
EternaPro
Extended WarrantyAvailable on application
Low energy alternative to standard emergency exit fittings • Pressed steel body• Hinged gear tray: easy installation
and maintenance• Hole cut out size: 115mm x 320mm• LEDREM3 = M.O.M: 1 / O.P.Q: 10• LEDMDDEM3 = M.O.M: 1 / O.P.Q: 6• RLGDLR / RLGDUP = M.O.M: 1 / O.P.Q: 25
LEDREM3• Polycarbonate reeded diffuser: unobtrusive
solution for discreet emergency lighting• Facility for non-maintained mode• Facility for remote switching
LEDMDDEM3• Slotted pressed steel panel housing
polycarbonate down arrow exit legend for unobtrusive exit path designation
90m
m
410mm 135mm
320mm 110mm
260m
m
180m
m
Code Version Wattage Lumens
LEDREM3 Reeded Diffuser 5.20W 162 lm
LEDMDDEM3 Edge Lit Panel & Diffuser 3.5W -
Up & left / right legend available for LEDMDDEM3
RLGDLR
RLGDUP
LEDMDDEM3
LEDREM3
Code
LDLEM3
Download the SPACING TABLE from: www.eterna-lighting.co.uk/product/ldlem3/
LEDREM3
LEDMDDEM3
Emergency charge light
Emergency module glows green in standby mode
Bright white glow in emergency mode
All legends comply with current regulations
PAG
E 34
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
IP65 LED TWINSPOT EMERGENCY FITTING
IP20 LED EMERGENCY TWINSPOT FITTING
White / 7W (2 x 3W) / 3500K / 441 lm / 30,000 hrs / IP65
White / 3.4W / 6000K / 405 lm / IP20
• Twin 3W LED projectors: provide superior light output to traditional twinspot fittings
• Horizontally and vertically adjustable heads, 180° rotation across the horizontal plane
• IP65 rating utilising high quality polycarbonate enclosure: for installation in wet or dusty environments
• Individual indicator to show ‘Lamps Healthy’ and ‘Charge’
• Reduced battery capacity requirement: allows a more compact design reducing the weight dramatically compared to traditional products facilitating easier installation
• Minimum 3 hour non-maintained functionality in emergency mode
• M.O.M: 1 / O.P.Q: 6
295m
m
300mm 70mm
190m
m
125mm
75m
m
60mm
Code
LEDTWNSPOT
EternaPro
Extended Warranty
Available on application
310m
m
170m
m11
0mm
50mm
55mm280mm
Reduced battery capacity requirement allows a more compact design reducing the weight dramatically compared to traditional products facilitating easier installation. • Polycarbonate construction• Individual indicator to show ‘Lamps Healthy’
and ‘Charge’• Horizontally and vertically adjustable heads,
180° rotation across the horizontal plane• 3 hour non-maintained operation• M.O.M: 1 / O.P.Q: 6
LED EMERGENCY HANGING EXIT SIGN LIGHTWhite / 2.3W / 6000K / 171 lm / 25,000 hrs
• Remote connection box complete with adjustable length suspension cable (max 80cm)
• Supplied with a double-sided down arrow exit legend - left/right & up arrow legends available separately
• 3 hour maintained mode as standard which can also be configured for non-maintained or remote switched operation
• Viewing distance 29m• Test button and LED charge light• SIGNLEDEM3: M.O.M: 1 / O.P.Q: 6• SIGNLGD/UP: M.O.M: 1 / O.P.Q: 100 172mm
Up to 800mm
Max.
55mm340mm
335mm 8mm
45mm
SIGNLGD SIGNLGDUP
Code
SIGNLEDEM3
Code
TSPOTLIP20
EMERGENCY BATTERY PACK FOR ETERNA LED FITTINGSWhite / 65W Max / IP20
• Enables Eterna LED commercial downlights (RDL range on PAGE 49) and LED panel lights (See PAGE 26-27) to be converted into emergency luminaires, rated at 65W max
• 3 hours duration in emergency mode• Push fit plug and socket: allows quick & easy
installation• Facility for non maintained mode and for remote
switching• LED charge light• Control gear can be removed from the housing:
allows use in installations with smaller hole cut out• M.O.M = 1 / O.P.Q = 1
Code
EBPM3
EternaPro
Extended WarrantyAvailable on application
EternaPro
Extended Warranty
Available on application
250mm 55mm
110m
m
Download the EASY STEP BY STEP WIRING GUIDE from: www.eterna-lighting.co.uk/product/ebpm3/
All legends comply with current regulations
EternaPro
Extended WarrantyAvailable on application
PAG
E 35
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting
IP20 SLIM LED MAINTAINED EMERGENCY EXIT BOX
IP20 LED MAINTAINED EMERGENCY EXIT BOX SIGN
White / 5.2W / 30,000 hrs / IP20
White / 4W / 30,000 hrs / IP20
An aesthetically pleasing, low energy, ultra slim alternative to conventional exit boxes • Ultra slim design: excellent solution where a
more compact fitting is required• 3 hour maintained mode as standard which
can also be configured for non maintained operation
• Diffuser on base: for added downward illumination of exit path
• Interchangeable down, up, left & right arrow exit legends included
• Long life energy efficient LED light source eliminates lamp replacement cycle without compromising panel visibility distance
• Facility for remote switching• LED charge light• For wall mounting only• 34 metres viewing distance• M.O.M: 1 / O.P.Q: 10 393mm
193m
m27mm
Code
EBLSLIMM
Down, up, left & right legends included
EternaPro
Extended WarrantyAvailable on application
• Steel construction• 3 hour maintained mode as standard which
can also be configured for non maintained operation
• Facility for remote switching• Interchangeable polycarbonate down
arrow exit legend included• Diffuser on base: for added downward
illumination of exit path• Long life energy efficient LED light source
eliminates lamp replacement cycle without compromising panel visibility distance
• LED charge light and battery test button• Viewing distance: 34m• EXIT3MLED = M.O.M: 6 / O.P.Q: 6 • Legends = M.O.M: 1 / O.P.Q: 100
EBLGDL
EBLGDR
EBLGDU
Full range of alternative legend directional panels available
Code
EXIT3MLED
Low energy alternative to standard emergency exit signs.
390mm
192m
m
60mm
EternaPro
Extended WarrantyAvailable on application
IP65 LED MAINTAINED / NON MAINTAINED EMERGENCY BULKHEADSBOTH FITTINGS: White / 6000K / 30,000 hrs / IP65
392mm
346mm
45mm
150m
m
105m
m
• Polycarbonate construction • Internal or external use• 20mm gland entries as standard• Minimum 3 hour functionality in emergency mode• High output LEDs with bright white light • Semi recessed fixing: allows a more discreet installation option• Dedicated self adhesive legend pack included with a combination of
symbols: allows multiple exit path designation options (LGDSET)• Fitting / Frame = M.O.M: 1 / O.P.Q: 12• LGDSET = M.O.M: 12 / O.P.Q: 12
EMLED3M: • Facility for remote switching and non-maintained mode• 235 lm when connected to mains,150 lm when connected to battery
BULKHEAD FRAME (BULKFRAME):• For use with emergency bulkheads• Pressed steel construction • Spring retaining clips• Semi recessed fixing: allows a more discreet installation option• Hole cut out size: 350mm x 117mm
70mm355mm
110m
m
Hinged gear tray & push fit terminal block: allows for quicker and easier installation and maintenance
Low energy alternative to standard fluorescent emergency bulkheads.
Code Version Wattage Lumens
EMLED3M Maintained 7W 235/150 lm
EMLED3NM Non Maintained 2W 150 lm
EternaPro
Extended WarrantyAvailable on application
All legends comply with current regulations
All legends comply with current regulations
All legends comply with current regulations
PAG
E 36
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Em
erge
ncy
Ligh
ting