WWW.STETSONBUILDINGPRODUCTS.COM

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

CEDAR RAPIDS, IA(319) 396-7272

DES MOINES, IA(515) 309-0393

DUBUQUE, IA(563) 582-5410

ELDRIDGE, IA(563) 285-4647

WATERLOO, IA(319) 236-5074

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

WWW.STETSONBUILDINGPRODUCTS.COM

DECATUR, IL(217) 362-0600

ROCKFORD, IL(815) 398-6935

ROCK ISLAND, IL(309) 788-8412

URBANA, IL(217) 344-5400

OMAHA, NE(402) 331-0333

GRAND ISLAND, NE(308) 384-6677

FORMING AND SHORING SOLUTIONS

ALISPLY HEAVY WALLSRecoverable modular formwork system for fair-faced concrete walls, designed to be handled with a crane. Alisply Walls consists of a galvanized steel reinforced frame and a phenolic plywood lining. The panels are joined by means of the quick and manual clamp that connects and aligns the panels with no need of accessories.

ALISPLY

SPACE-LIFT

ADVANTAGES OF THE SYSTEM• Large surface areas (3 or 6 m2) with minimum concrete

joints. • The design of the frame allows the application of the system

in stepped and battered walls.• Innovative quick and safe clamp system for the connection

of panels, with no need of tools or alignment bars.• Resistant and versatile product that allows solving with its

standard elements the best part of the situations that so often arise in building.

• Accessories: Working Platform, Climbing Platform, Aligners, Large Surface Areas Stiffeners and support elements to implement 9′-10 1/8” – 29′-6 5/16” (3-9 m) One-Sided Walls.

• High quality concrete finish due to the phenolic plywood lining and the minimum joints of the steel frame.

ALISPLY CIRCULAR WALLSRecoverable modular formwork system for circular fair-faced concrete walls, designed to be handled with a crane. Alisply Circular consists of a light galvanized steel frame and a 9/16”( 15 mm) thick phenolic plywood lining. The frame incorporates tie rods that allow giving the wall the required radius on site.

ADVANTAGES OF THE SYSTEM• Extra-flat and pre-assembled module (only 5 7/8” (15 cm)

thick).• Horizontal and vertical joints between walls by means of

the quick and manual clamp.• Wall radius easy to change by means of the system

incorporated in the panel.

• Radius tie rods protected against knocks and concrete.• Accessories: Working Platform, Climbing Platform and 9′-

10 1/8” to 29′-6 5/16” (3 to 9 m) One-faced Wall.• Fair-faced concrete finish with imperceptible joints.• Minimum radius: 8′-2 7/16” (2,5 m)

The Space-Lift system is a fully-engineered jump form system intended for concrete shear wall applications for straight or radius walls. The system consists of frame components and a carriage assembly that supports the forming equipment and crew.

The Space-Lift assembly is suspended from Jump shoes that are bolted to inserts in the concrete wall. The entire assembly remains anchored to the wall during the forming operation. Work platforms provide safe access during setting, placing, stripping and finishing activities. Rollback carriages allow the gang form to be retracted from the wall without being removed. All these activities, of course, proceed without using valuable crane time. When the gang form is retracted from a completed section of concrete wall, another set of Jump Shoes can be bolted to the inserts in anticipation of the next lift.

Stetson Building Products, LLC. Forming and Shoring Division uses state of the art computer aided drafting equipment (CAD). We have experienced drafters to provide clear, concise erection drawings for our customer’s use on all rental projects.

ENGINEERING

CONCRETE FORMING Wall FormsShoring & PoleConcrete Support SystemsSteel StakesBrick Liners

Sonotube 8" to 60"Overhang BracketsTurnbucklesAllenform TiesAluminum Form TiesGates Twist Ties

Coil Bolts, Rods, TiesSnap TiesWaler BracketsUniversal TiesPencil RodRod Clamps

S Panel TiesX Flat TiesFORM RENTALSHORING RENTALDRAFTING SERVICES

A CONSTRUCTION SUPPLY GROUP COMPANY

The Space-Lift system supports any Symons gang form system that can utilize Versiform® walers, including:

• Steel-Ply®• Sym-Ply ®• Alisply®• Aluminum Beam Gang

ADDITIONAL PRODUCTS

• Customer Hands-On-Training Available (on site or in house)

• Lunch and Learn Opportunities

CONTACT US FOR YOUR TRAINING NEEDS

Max-A-Form is a heavy-duty, all-steel, concrete forming system for columns, piers, walls, pier caps and many other heavy structures. It is also used in applications as a self-spanning beam.

The Max-A-Form Forming System combines the labor-saving benefits of modular forming with the strength of an all-steel design. It is ideal for gang forming heavy structural walls and columns where repetition, multiple lifts, or when a smooth finish are required. The structurally welded frame and steel face also can support concrete loads over long spans without the need for shoring equipment. The Max-A-Form forming systems includes bullnose forms that can be combined to create circular columns. Friction collars are available for circular column lifts.

The Steel-Ply forming system is a pre -engineered, factory -built, reusable concrete forming system. It may be used in handset or gang form applications, for commercial or residential structures. The Steel -Ply forming system can form walls of almost any shape or size, with accessories for special structures and details. This system is more productive and economical than job-built plywood formwork or other forming methods.

The Steel-Ply forming system saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. Minimal training is needed, so workers are quickly up to maximum efficiency. The only tool required for setup and stripping is a hammer.

• 1000 psf allowable pressure• Every panel and filler is made in the USA• No special tools required - just a carpenter’s hammer• The same form can be handset or gangformed• Has been the most popular concrete forming system in the USA

for over 60 years

MAX-A-FORMSTEEL-PLY

SYM-PLY

Sym-Ply is imperial-dimensioned meaning metric conversions are eliminated enabling faster assembly and setting of the forms. Innovative clamp design rapidly connects and aligns forms with one step using only a hammer to lock the clamp firmly in place. The system eliminates the need for walers and strongbacks on gangs under 16 feet in height. Tie holes are pre-drilled and protected with a plastic sleeve, eliminating the need for drilling on site. The system accommodates 1” up to 1¼” Taper Ties and/or She-Bolts.

Symons all new Sym-Ply concrete forming system has been designed and manufactured to the demanding requirements of today’s construction projects.

FEATURES: • 1,500 psf allowable pressure • 80 ksi steel for strength and durability • Connects directly to Steel-Ply panels, fillers, corners, hinges and pilaster forms• Built-in tie-off points meet OSHA requirements for fall protection• Weighs only 8 pounds per square foot • 5 ∕8” 100/30 HDO standard plywood face • Profiled side rail allows pry bar access for adjusting gangs to the chalk line • Clamp or bolt together for maximum versatility• 1 7 ∕16” diameter tie hole accommodates 50 kip or 15mm Taper Ties

and She-Bolts• Plywood protector sleeve plate is buttressed by the tie box for extended

sleeve life • Up to 10˚ batter with 50K ties• Only 4” deep means more forms per truck • Manufactured in the U.S.A.

Sym-Ply is 100% compatible with Steel-Ply®, making it versatile and easy to use with an existing fleet — no transition fillers needed

• The all-steel Flex-Form system gives you all the strength and versatility you expect from Symons. Flex-Form has integral 4” deep vertical stiffeners with 3∕16” steel skin plate to provide up to a 1,200 psf system that adapts to any radius 5’ and over.

• Factory-rolled steel ribs set the radius and bolt to the top and bottom of flexible panels to shape and securely hold the form in the required radius. Panels conform accurately to the radius of the ribs — this design assures the correct radius every time. By substituting a straight rib, you can use the Flex-Form system for straight walls when needed.

• Fast and Simple Erection Panels are typically delivered to the jobsite pre-assembled to the required radius. There are no expensive templates to build, no floppy panels to handle and no bolts to torque. You can start building the Flex -Form gang immediately.

• If the job requires more than one radius, simply order extra rolled ribs for use with the same forms. Changeover is simple, done quickly by the forming crew on the site. The new rolled ribs set the forms to the new radius, speeding the gang assembly and further increasing productivity.

SOLDIER

FLEX-FORM

• The Symons Soldier system is a lightweight, yet extremely strong, construction beam system with virtually unlimited application possibilities.

• Symons developed a unique hole pattern which makes the Symons Soldier adaptable to almost any forming or shoring configuration with standard components and accessories.

• Soldier End Plates are high-strength steel, built square to the Soldier beam, enabling the end-to-end bolted connections to develop the full strength of the Soldier beam. It is designed to be a compression member. If used as a beam, consult Dayton Superior prior to design.

ISCHEBECK-TITAN SHORING SYSTEMS

The HV Decking System provides rapid, versatile and efficient means of casting concrete decks in a wide variety of applications.

Lightweight and easy to use, the HV Decking System comprises just

3 main components and can be erected and dismantled by a team of two operatives without the need for special tools, making it one of the least labor intensive systems on the market. With all erection and dismantling undertaken from beneath the deck itself, the system minimizes requirements for working at height and makes a major contribution to site safety.

The system’s modular nature simplifies the entire process, naturally creating a 1.8m grid that self sets. This simplicity in use, combined with the system’s drop-head, allows for early stripping and re-use of beams and panels, thus enhancing site productivity while maintaining automatic backpropping.

Versatility is also a key feature of the HV Decking System; columns, wall corners, curved walls and many other potentially problematic features can be accommodated with ease by means of simple positioning and adjustment of panels and infill beams.

The HV Support System is the only system you will need on standard jobsites. Compatible with all CSS shoring systems, the HV Support System demonstrates added strength and ease due to its additional endplate. There is no right side up or down. All leg sizes have a permissible load of 15,000 lbs. as a single post. With the addition of ledger frames the legs are capable of safely supporting up to 18,000 lbs. each.

• Lightweight components for rapid erection and dismantling• Enhances safety on site• Minimizes labor requirements and costs• Self-sets to save time• Early stripping maximises equipment re-use• Continual back-propping improves productivity

THE DROP-HEAD • Hot dip galvanized steel • Fixed to prop with 2No. speed thread bolts• Fast stripping by cam action mechanism• No special tools – hammer only required for stripping

PRIMARY BEAM • Lightweight, high strength aluminum• Durable construction• Easy, fast and safe handling

• 1500 psf allowable pressure• Over 100 standard panel sizes• 3/16” steel face provides an excellent

concrete finish• High strength system reduces tie requirements

• 3/4” Speed Bolts allow fast set-up• Panel rigidity virtually eliminates walers and

strongbacks

FrameFast is engineered for maximum strength, labor productivity and reuse capabilities.

FrameFast components feature high strength-to-weight ratios. Most components are light enough to be carried by one person, yet because of their strength, fewer pieces are needed. Less time and labor are required for set up and removal.

The system includes Heavy Duty Shore Frames, Adjustable Post Shores, Adjustable Horizontal Shores, and Aluminum Beams. These products are available in a wide range of sizes for virtually any deck forming application. A variety of special

FRAME-FAST SHORING

features and accessories make them faster and easier to use than competitive alternatives.

FrameFast shoring frames are designed to provide maximum strength, versatility, and efficiency in virtually any shoring application.

To ensure exceptional strength and durability, all Symons frames are constructed of welded, structural steel tubing having a minimum yield strength of 50,000 lbs./in2 . and a tensile strength of 75,000 lbs./in2 . A typical load capacity is 12,000 lbs./leg (2.5 to 1 safety factor) up to three tiers high.

Eight Shoring Frame sizes are available in 3’, 4’, 5’ and 6’ heights in both 2’ and 4’ widths. The patented Drop Lock permits frames to be erected and dismantled quickly. This unique locking arrangement holds frames together more securely, providing maximum tower rigidity and shoring safety.

The Titan HV panel decking system is comprised of two components:

Max-A-Form is a heavy-duty, all-steel, concrete forming system for columns, piers, walls, pier caps and many other heavy structures. It is also used in applications as a self-spanning beam.

The Max-A-Form Forming System combines the labor-saving benefits of modular forming with the strength of an all-steel design. It is ideal for gang forming heavy structural walls and columns where repetition, multiple lifts, or when a smooth finish are required. The structurally welded frame and steel face also can support concrete loads over long spans without the need for shoring equipment. The Max-A-Form forming systems includes bullnose forms that can be combined to create circular columns. Friction collars are available for circular column lifts.

The Steel-Ply forming system is a pre -engineered, factory -built, reusable concrete forming system. It may be used in handset or gang form applications, for commercial or residential structures. The Steel -Ply forming system can form walls of almost any shape or size, with accessories for special structures and details. This system is more productive and economical than job-built plywood formwork or other forming methods.

The Steel-Ply forming system saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. Minimal training is needed, so workers are quickly up to maximum efficiency. The only tool required for setup and stripping is a hammer.

• 1000 psf allowable pressure• Every panel and filler is made in the USA• No special tools required - just a carpenter’s hammer• The same form can be handset or gangformed• Has been the most popular concrete forming system in the USA

for over 60 years

MAX-A-FORMSTEEL-PLY

SYM-PLY

Sym-Ply is imperial-dimensioned meaning metric conversions are eliminated enabling faster assembly and setting of the forms. Innovative clamp design rapidly connects and aligns forms with one step using only a hammer to lock the clamp firmly in place. The system eliminates the need for walers and strongbacks on gangs under 16 feet in height. Tie holes are pre-drilled and protected with a plastic sleeve, eliminating the need for drilling on site. The system accommodates 1” up to 1¼” Taper Ties and/or She-Bolts.

Symons all new Sym-Ply concrete forming system has been designed and manufactured to the demanding requirements of today’s construction projects.

FEATURES: • 1,500 psf allowable pressure • 80 ksi steel for strength and durability • Connects directly to Steel-Ply panels, fillers, corners, hinges and pilaster forms• Built-in tie-off points meet OSHA requirements for fall protection• Weighs only 8 pounds per square foot • 5 ∕8” 100/30 HDO standard plywood face • Profiled side rail allows pry bar access for adjusting gangs to the chalk line • Clamp or bolt together for maximum versatility• 1 7 ∕16” diameter tie hole accommodates 50 kip or 15mm Taper Ties

and She-Bolts• Plywood protector sleeve plate is buttressed by the tie box for extended

sleeve life • Up to 10˚ batter with 50K ties• Only 4” deep means more forms per truck • Manufactured in the U.S.A.

Sym-Ply is 100% compatible with Steel-Ply®, making it versatile and easy to use with an existing fleet — no transition fillers needed

• The all-steel Flex-Form system gives you all the strength and versatility you expect from Symons. Flex-Form has integral 4” deep vertical stiffeners with 3∕16” steel skin plate to provide up to a 1,200 psf system that adapts to any radius 5’ and over.

• Factory-rolled steel ribs set the radius and bolt to the top and bottom of flexible panels to shape and securely hold the form in the required radius. Panels conform accurately to the radius of the ribs — this design assures the correct radius every time. By substituting a straight rib, you can use the Flex-Form system for straight walls when needed.

• Fast and Simple Erection Panels are typically delivered to the jobsite pre-assembled to the required radius. There are no expensive templates to build, no floppy panels to handle and no bolts to torque. You can start building the Flex -Form gang immediately.

• If the job requires more than one radius, simply order extra rolled ribs for use with the same forms. Changeover is simple, done quickly by the forming crew on the site. The new rolled ribs set the forms to the new radius, speeding the gang assembly and further increasing productivity.

SOLDIER

FLEX-FORM

• The Symons Soldier system is a lightweight, yet extremely strong, construction beam system with virtually unlimited application possibilities.

• Symons developed a unique hole pattern which makes the Symons Soldier adaptable to almost any forming or shoring configuration with standard components and accessories.

• Soldier End Plates are high-strength steel, built square to the Soldier beam, enabling the end-to-end bolted connections to develop the full strength of the Soldier beam. It is designed to be a compression member. If used as a beam, consult Dayton Superior prior to design.

ISCHEBECK-TITAN SHORING SYSTEMS

The HV Decking System provides rapid, versatile and efficient means of casting concrete decks in a wide variety of applications.

Lightweight and easy to use, the HV Decking System comprises just

3 main components and can be erected and dismantled by a team of two operatives without the need for special tools, making it one of the least labor intensive systems on the market. With all erection and dismantling undertaken from beneath the deck itself, the system minimizes requirements for working at height and makes a major contribution to site safety.

The system’s modular nature simplifies the entire process, naturally creating a 1.8m grid that self sets. This simplicity in use, combined with the system’s drop-head, allows for early stripping and re-use of beams and panels, thus enhancing site productivity while maintaining automatic backpropping.

Versatility is also a key feature of the HV Decking System; columns, wall corners, curved walls and many other potentially problematic features can be accommodated with ease by means of simple positioning and adjustment of panels and infill beams.

The HV Support System is the only system you will need on standard jobsites. Compatible with all CSS shoring systems, the HV Support System demonstrates added strength and ease due to its additional endplate. There is no right side up or down. All leg sizes have a permissible load of 15,000 lbs. as a single post. With the addition of ledger frames the legs are capable of safely supporting up to 18,000 lbs. each.

• Lightweight components for rapid erection and dismantling• Enhances safety on site• Minimizes labor requirements and costs• Self-sets to save time• Early stripping maximises equipment re-use• Continual back-propping improves productivity

THE DROP-HEAD • Hot dip galvanized steel • Fixed to prop with 2No. speed thread bolts• Fast stripping by cam action mechanism• No special tools – hammer only required for stripping

PRIMARY BEAM • Lightweight, high strength aluminum• Durable construction• Easy, fast and safe handling

• 1500 psf allowable pressure• Over 100 standard panel sizes• 3/16” steel face provides an excellent

concrete finish• High strength system reduces tie requirements

• 3/4” Speed Bolts allow fast set-up• Panel rigidity virtually eliminates walers and

strongbacks

FrameFast is engineered for maximum strength, labor productivity and reuse capabilities.

FrameFast components feature high strength-to-weight ratios. Most components are light enough to be carried by one person, yet because of their strength, fewer pieces are needed. Less time and labor are required for set up and removal.

The system includes Heavy Duty Shore Frames, Adjustable Post Shores, Adjustable Horizontal Shores, and Aluminum Beams. These products are available in a wide range of sizes for virtually any deck forming application. A variety of special

FRAME-FAST SHORING

features and accessories make them faster and easier to use than competitive alternatives.

FrameFast shoring frames are designed to provide maximum strength, versatility, and efficiency in virtually any shoring application.

To ensure exceptional strength and durability, all Symons frames are constructed of welded, structural steel tubing having a minimum yield strength of 50,000 lbs./in2 . and a tensile strength of 75,000 lbs./in2 . A typical load capacity is 12,000 lbs./leg (2.5 to 1 safety factor) up to three tiers high.

Eight Shoring Frame sizes are available in 3’, 4’, 5’ and 6’ heights in both 2’ and 4’ widths. The patented Drop Lock permits frames to be erected and dismantled quickly. This unique locking arrangement holds frames together more securely, providing maximum tower rigidity and shoring safety.

The Titan HV panel decking system is comprised of two components:

Max-A-Form is a heavy-duty, all-steel, concrete forming system for columns, piers, walls, pier caps and many other heavy structures. It is also used in applications as a self-spanning beam.

The Max-A-Form Forming System combines the labor-saving benefits of modular forming with the strength of an all-steel design. It is ideal for gang forming heavy structural walls and columns where repetition, multiple lifts, or when a smooth finish are required. The structurally welded frame and steel face also can support concrete loads over long spans without the need for shoring equipment. The Max-A-Form forming systems includes bullnose forms that can be combined to create circular columns. Friction collars are available for circular column lifts.

The Steel-Ply forming system is a pre -engineered, factory -built, reusable concrete forming system. It may be used in handset or gang form applications, for commercial or residential structures. The Steel -Ply forming system can form walls of almost any shape or size, with accessories for special structures and details. This system is more productive and economical than job-built plywood formwork or other forming methods.

The Steel-Ply forming system saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. Minimal training is needed, so workers are quickly up to maximum efficiency. The only tool required for setup and stripping is a hammer.

• 1000 psf allowable pressure• Every panel and filler is made in the USA• No special tools required - just a carpenter’s hammer• The same form can be handset or gangformed• Has been the most popular concrete forming system in the USA

for over 60 years

MAX-A-FORMSTEEL-PLY

SYM-PLY

Sym-Ply is imperial-dimensioned meaning metric conversions are eliminated enabling faster assembly and setting of the forms. Innovative clamp design rapidly connects and aligns forms with one step using only a hammer to lock the clamp firmly in place. The system eliminates the need for walers and strongbacks on gangs under 16 feet in height. Tie holes are pre-drilled and protected with a plastic sleeve, eliminating the need for drilling on site. The system accommodates 1” up to 1¼” Taper Ties and/or She-Bolts.

Symons all new Sym-Ply concrete forming system has been designed and manufactured to the demanding requirements of today’s construction projects.

FEATURES: • 1,500 psf allowable pressure • 80 ksi steel for strength and durability • Connects directly to Steel-Ply panels, fillers, corners, hinges and pilaster forms• Built-in tie-off points meet OSHA requirements for fall protection• Weighs only 8 pounds per square foot • 5 ∕8” 100/30 HDO standard plywood face • Profiled side rail allows pry bar access for adjusting gangs to the chalk line • Clamp or bolt together for maximum versatility• 1 7 ∕16” diameter tie hole accommodates 50 kip or 15mm Taper Ties

and She-Bolts• Plywood protector sleeve plate is buttressed by the tie box for extended

sleeve life • Up to 10˚ batter with 50K ties• Only 4” deep means more forms per truck • Manufactured in the U.S.A.

Sym-Ply is 100% compatible with Steel-Ply®, making it versatile and easy to use with an existing fleet — no transition fillers needed

• The all-steel Flex-Form system gives you all the strength and versatility you expect from Symons. Flex-Form has integral 4” deep vertical stiffeners with 3∕16” steel skin plate to provide up to a 1,200 psf system that adapts to any radius 5’ and over.

• Factory-rolled steel ribs set the radius and bolt to the top and bottom of flexible panels to shape and securely hold the form in the required radius. Panels conform accurately to the radius of the ribs — this design assures the correct radius every time. By substituting a straight rib, you can use the Flex-Form system for straight walls when needed.

• Fast and Simple Erection Panels are typically delivered to the jobsite pre-assembled to the required radius. There are no expensive templates to build, no floppy panels to handle and no bolts to torque. You can start building the Flex -Form gang immediately.

• If the job requires more than one radius, simply order extra rolled ribs for use with the same forms. Changeover is simple, done quickly by the forming crew on the site. The new rolled ribs set the forms to the new radius, speeding the gang assembly and further increasing productivity.

SOLDIER

FLEX-FORM

• The Symons Soldier system is a lightweight, yet extremely strong, construction beam system with virtually unlimited application possibilities.

• Symons developed a unique hole pattern which makes the Symons Soldier adaptable to almost any forming or shoring configuration with standard components and accessories.

• Soldier End Plates are high-strength steel, built square to the Soldier beam, enabling the end-to-end bolted connections to develop the full strength of the Soldier beam. It is designed to be a compression member. If used as a beam, consult Dayton Superior prior to design.

ISCHEBECK-TITAN SHORING SYSTEMS

The HV Decking System provides rapid, versatile and efficient means of casting concrete decks in a wide variety of applications.

Lightweight and easy to use, the HV Decking System comprises just

3 main components and can be erected and dismantled by a team of two operatives without the need for special tools, making it one of the least labor intensive systems on the market. With all erection and dismantling undertaken from beneath the deck itself, the system minimizes requirements for working at height and makes a major contribution to site safety.

The system’s modular nature simplifies the entire process, naturally creating a 1.8m grid that self sets. This simplicity in use, combined with the system’s drop-head, allows for early stripping and re-use of beams and panels, thus enhancing site productivity while maintaining automatic backpropping.

Versatility is also a key feature of the HV Decking System; columns, wall corners, curved walls and many other potentially problematic features can be accommodated with ease by means of simple positioning and adjustment of panels and infill beams.

The HV Support System is the only system you will need on standard jobsites. Compatible with all CSS shoring systems, the HV Support System demonstrates added strength and ease due to its additional endplate. There is no right side up or down. All leg sizes have a permissible load of 15,000 lbs. as a single post. With the addition of ledger frames the legs are capable of safely supporting up to 18,000 lbs. each.

• Lightweight components for rapid erection and dismantling• Enhances safety on site• Minimizes labor requirements and costs• Self-sets to save time• Early stripping maximises equipment re-use• Continual back-propping improves productivity

THE DROP-HEAD • Hot dip galvanized steel • Fixed to prop with 2No. speed thread bolts• Fast stripping by cam action mechanism• No special tools – hammer only required for stripping

PRIMARY BEAM • Lightweight, high strength aluminum• Durable construction• Easy, fast and safe handling

• 1500 psf allowable pressure• Over 100 standard panel sizes• 3/16” steel face provides an excellent

concrete finish• High strength system reduces tie requirements

• 3/4” Speed Bolts allow fast set-up• Panel rigidity virtually eliminates walers and

strongbacks

FrameFast is engineered for maximum strength, labor productivity and reuse capabilities.

FrameFast components feature high strength-to-weight ratios. Most components are light enough to be carried by one person, yet because of their strength, fewer pieces are needed. Less time and labor are required for set up and removal.

The system includes Heavy Duty Shore Frames, Adjustable Post Shores, Adjustable Horizontal Shores, and Aluminum Beams. These products are available in a wide range of sizes for virtually any deck forming application. A variety of special

FRAME-FAST SHORING

features and accessories make them faster and easier to use than competitive alternatives.

FrameFast shoring frames are designed to provide maximum strength, versatility, and efficiency in virtually any shoring application.

To ensure exceptional strength and durability, all Symons frames are constructed of welded, structural steel tubing having a minimum yield strength of 50,000 lbs./in2 . and a tensile strength of 75,000 lbs./in2 . A typical load capacity is 12,000 lbs./leg (2.5 to 1 safety factor) up to three tiers high.

Eight Shoring Frame sizes are available in 3’, 4’, 5’ and 6’ heights in both 2’ and 4’ widths. The patented Drop Lock permits frames to be erected and dismantled quickly. This unique locking arrangement holds frames together more securely, providing maximum tower rigidity and shoring safety.

The Titan HV panel decking system is comprised of two components:

WWW.STETSONBUILDINGPRODUCTS.COM

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

CEDAR RAPIDS, IA(319) 396-7272

DES MOINES, IA(515) 309-0393

DUBUQUE, IA(563) 582-5410

ELDRIDGE, IA(563) 285-4647

WATERLOO, IA(319) 236-5074

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

WWW.STETSONBUILDINGPRODUCTS.COM

DECATUR, IL(217) 362-0600

ROCKFORD, IL(815) 398-6935

ROCK ISLAND, IL(309) 788-8412

URBANA, IL(217) 344-5400

OMAHA, NE(402) 331-0333

GRAND ISLAND, NE(308) 384-6677

FORMING AND SHORING SOLUTIONS

ALISPLY HEAVY WALLSRecoverable modular formwork system for fair-faced concrete walls, designed to be handled with a crane. Alisply Walls consists of a galvanized steel reinforced frame and a phenolic plywood lining. The panels are joined by means of the quick and manual clamp that connects and aligns the panels with no need of accessories.

ALISPLY

SPACE-LIFT

ADVANTAGES OF THE SYSTEM• Large surface areas (3 or 6 m2) with minimum concrete

joints. • The design of the frame allows the application of the system

in stepped and battered walls.• Innovative quick and safe clamp system for the connection

of panels, with no need of tools or alignment bars.• Resistant and versatile product that allows solving with its

standard elements the best part of the situations that so often arise in building.

• Accessories: Working Platform, Climbing Platform, Aligners, Large Surface Areas Stiffeners and support elements to implement 9′-10 1/8” – 29′-6 5/16” (3-9 m) One-Sided Walls.

• High quality concrete finish due to the phenolic plywood lining and the minimum joints of the steel frame.

ALISPLY CIRCULAR WALLSRecoverable modular formwork system for circular fair-faced concrete walls, designed to be handled with a crane. Alisply Circular consists of a light galvanized steel frame and a 9/16”( 15 mm) thick phenolic plywood lining. The frame incorporates tie rods that allow giving the wall the required radius on site.

ADVANTAGES OF THE SYSTEM• Extra-flat and pre-assembled module (only 5 7/8” (15 cm)

thick).• Horizontal and vertical joints between walls by means of

the quick and manual clamp.• Wall radius easy to change by means of the system

incorporated in the panel.

• Radius tie rods protected against knocks and concrete.• Accessories: Working Platform, Climbing Platform and 9′-

10 1/8” to 29′-6 5/16” (3 to 9 m) One-faced Wall.• Fair-faced concrete finish with imperceptible joints.• Minimum radius: 8′-2 7/16” (2,5 m)

The Space-Lift system is a fully-engineered jump form system intended for concrete shear wall applications for straight or radius walls. The system consists of frame components and a carriage assembly that supports the forming equipment and crew.

The Space-Lift assembly is suspended from Jump shoes that are bolted to inserts in the concrete wall. The entire assembly remains anchored to the wall during the forming operation. Work platforms provide safe access during setting, placing, stripping and finishing activities. Rollback carriages allow the gang form to be retracted from the wall without being removed. All these activities, of course, proceed without using valuable crane time. When the gang form is retracted from a completed section of concrete wall, another set of Jump Shoes can be bolted to the inserts in anticipation of the next lift.

Stetson Building Products, LLC. Forming and Shoring Division uses state of the art computer aided drafting equipment (CAD). We have experienced drafters to provide clear, concise erection drawings for our customer’s use on all rental projects.

ENGINEERING

CONCRETE FORMING Wall FormsShoring & PoleConcrete Support SystemsSteel StakesBrick Liners

Sonotube 8" to 60"Overhang BracketsTurnbucklesAllenform TiesAluminum Form TiesGates Twist Ties

Coil Bolts, Rods, TiesSnap TiesWaler BracketsUniversal TiesPencil RodRod Clamps

S Panel TiesX Flat TiesFORM RENTALSHORING RENTALDRAFTING SERVICES

A CONSTRUCTION SUPPLY GROUP COMPANY

The Space-Lift system supports any Symons gang form system that can utilize Versiform® walers, including:

• Steel-Ply®• Sym-Ply ®• Alisply®• Aluminum Beam Gang

ADDITIONAL PRODUCTS

• Customer Hands-On-Training Available (on site or in house)

• Lunch and Learn Opportunities

CONTACT US FOR YOUR TRAINING NEEDS

WWW.STETSONBUILDINGPRODUCTS.COM

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

CEDAR RAPIDS, IA(319) 396-7272

DES MOINES, IA(515) 309-0393

DUBUQUE, IA(563) 582-5410

ELDRIDGE, IA(563) 285-4647

WATERLOO, IA(319) 236-5074

SINCE

1955

YOUR PARTNER IN

QUALITY CONSTRUCTION

WWW.STETSONBUILDINGPRODUCTS.COM

DECATUR, IL(217) 362-0600

ROCKFORD, IL(815) 398-6935

ROCK ISLAND, IL(309) 788-8412

URBANA, IL(217) 344-5400

OMAHA, NE(402) 331-0333

GRAND ISLAND, NE(308) 384-6677

FORMING AND SHORING SOLUTIONS

ALISPLY HEAVY WALLSRecoverable modular formwork system for fair-faced concrete walls, designed to be handled with a crane. Alisply Walls consists of a galvanized steel reinforced frame and a phenolic plywood lining. The panels are joined by means of the quick and manual clamp that connects and aligns the panels with no need of accessories.

ALISPLY

SPACE-LIFT

ADVANTAGES OF THE SYSTEM• Large surface areas (3 or 6 m2) with minimum concrete

joints. • The design of the frame allows the application of the system

in stepped and battered walls.• Innovative quick and safe clamp system for the connection

of panels, with no need of tools or alignment bars.• Resistant and versatile product that allows solving with its

standard elements the best part of the situations that so often arise in building.

• Accessories: Working Platform, Climbing Platform, Aligners, Large Surface Areas Stiffeners and support elements to implement 9′-10 1/8” – 29′-6 5/16” (3-9 m) One-Sided Walls.

• High quality concrete finish due to the phenolic plywood lining and the minimum joints of the steel frame.

ALISPLY CIRCULAR WALLSRecoverable modular formwork system for circular fair-faced concrete walls, designed to be handled with a crane. Alisply Circular consists of a light galvanized steel frame and a 9/16”( 15 mm) thick phenolic plywood lining. The frame incorporates tie rods that allow giving the wall the required radius on site.

ADVANTAGES OF THE SYSTEM• Extra-flat and pre-assembled module (only 5 7/8” (15 cm)

thick).• Horizontal and vertical joints between walls by means of

the quick and manual clamp.• Wall radius easy to change by means of the system

incorporated in the panel.

• Radius tie rods protected against knocks and concrete.• Accessories: Working Platform, Climbing Platform and 9′-

10 1/8” to 29′-6 5/16” (3 to 9 m) One-faced Wall.• Fair-faced concrete finish with imperceptible joints.• Minimum radius: 8′-2 7/16” (2,5 m)

The Space-Lift system is a fully-engineered jump form system intended for concrete shear wall applications for straight or radius walls. The system consists of frame components and a carriage assembly that supports the forming equipment and crew.

The Space-Lift assembly is suspended from Jump shoes that are bolted to inserts in the concrete wall. The entire assembly remains anchored to the wall during the forming operation. Work platforms provide safe access during setting, placing, stripping and finishing activities. Rollback carriages allow the gang form to be retracted from the wall without being removed. All these activities, of course, proceed without using valuable crane time. When the gang form is retracted from a completed section of concrete wall, another set of Jump Shoes can be bolted to the inserts in anticipation of the next lift.

Stetson Building Products, LLC. Forming and Shoring Division uses state of the art computer aided drafting equipment (CAD). We have experienced drafters to provide clear, concise erection drawings for our customer’s use on all rental projects.

ENGINEERING

CONCRETE FORMING Wall FormsShoring & PoleConcrete Support SystemsSteel StakesBrick Liners

Sonotube 8" to 60"Overhang BracketsTurnbucklesAllenform TiesAluminum Form TiesGates Twist Ties

Coil Bolts, Rods, TiesSnap TiesWaler BracketsUniversal TiesPencil RodRod Clamps

S Panel TiesX Flat TiesFORM RENTALSHORING RENTALDRAFTING SERVICES

A CONSTRUCTION SUPPLY GROUP COMPANY

The Space-Lift system supports any Symons gang form system that can utilize Versiform® walers, including:

• Steel-Ply®• Sym-Ply ®• Alisply®• Aluminum Beam Gang

ADDITIONAL PRODUCTS

• Customer Hands-On-Training Available (on site or in house)

• Lunch and Learn Opportunities

CONTACT US FOR YOUR TRAINING NEEDS