Upload
wout-lisseveld
View
370
Download
6
Tags:
Embed Size (px)
DESCRIPTION
ALGAE-X Fuel Management Systems - Technical presentation How AXI keeps fuel clean and dry
Citation preview
Optimal Fuel Quality
Ensures Safe & Reliable Emergency Power
Rev A - 07/2008
Fuel Maintenance Systems
Fuel Maintenance System - OVERVIEW
* Recommended tank size is a ball park figure. Depending on refuel frequency, consumption, tank access, contamination, etc. and cleaning time this values can be extended / lowered.
Larger capacity equipment for higher flow rates available
GPM GPH Gal. treated in 8 h
Gal. treated in 24 h
Gal. treated in 48 h
Recommended Tank Size *)
Rec. Plumbing / Hose Size Suction Discharge
STS 6000-SX 3 180 1440 4320 8640 < 2,000 Gallons 5/8" 1/2"
STS 6000-4GPM 4 240 1920 5760 11520 < 4,000 Gallons 3/4" 3/4"
STS 6000-4GPM-S 4 240 1920 5760 11520 < 8,000 Gallons 3/4" 3/4"
STS 5000-10GPM 10 600 4800 14400 28800 < 20,000 Gallons 1" 1"
STS 5000-25GPM 25 1500 12000 36000 72000 > 20,000 Gallons 2" 2"
TK 180 XT 3 180 < 200 Gallons 1/2" 1/2"
MTC 500 8 480 3840 11520 < 3,000 Gallons 3/4"(fuel) 1"(oil) 3/4"
MTC 1000 15 900 7200 21600 < 5,000 Gallons 1" 1"
MTC 3000 26 1560 12480 37440 < 10,000 Gallons 1 1/2" 1 1/4"
STS 6000-SX• 3 GPM - Completely automated,
compact, safe, stand alone, turn-key
• Algae-X SFC-50 - UL508A listed
“Smart Filtration Controller”
• Fully automated programmable PLC with alarms and safety switches for pump functions, filter pressure, leak detection and separator water level
• External alarm indication stack light (beacon)
• Control / alarm functions on SFC-50 (Indicator lights, PLC text screen, selector switch, reset push button)
• Options: stainless steel enclosure, flow meter, rotor sight glass, audible alarm
STS 6000-SX – General Specs
Flow rate 3 GPM
Tank Size < 2,000 gal
Port Size 3/4” NPT Inlet – 1/2” NPT outlet
Power 110V / 60Hz or 230V / 50Hz
Weight ~135 lbs
Dim. (HxWxD) 30” x 24” x 10”
LG-X Model 500
Filter / Water Sep. 10 or 30 micron
Motor 1/3 hp single phase, continuous duty,
thermally protected
Weatherproof single door wall-mounted enclosure with lockable handles / latches
14-gauge steel construction with continuously welded seamsFinished in polyester powder coatLouvered side panelsBrackets for wall mountingLiterature pocket
Stainless steel plumbing * Not for use with fluids that have a flash point below 100F (e.g. Gasoline, Alcohol, …)
STS 6000-S 4GPM• Completely automated, safe, stand
alone, turn key
• Three- or four-stage water removal and particulate filtration down to 3 micron
• Algae-X “Smart Filtration Controller” UL508A listed
• Fully automated programmable PLC control with alarms and safety switches for pump functions, filter pressure, leak detection, flow detection and water level in the separator
• Integrated industrial display and control panel
• Options: stainless steel enclosure, flow meter, rotor sight glass, audible alarm
STS 6000-4GPM(-S) – General Specs
Flow rate 4 GPM
Tank Size < 8,000 gal
Port Size 3/4” NPT
Power 110V / 60Hz or 230V / 50Hz
Weight ~200 lbs
Dim. (HxWxD) 36” x 36” x 12”
LG-X Model 1500
Primary Filter 10 or 30 micron (optional: 60 micron cleanable stainless steel)
Secondary Filter 3 or (10) micron (Water Block)
Motor 1/2 hp single phase, continuous duty, thermally protected
Weatherproof single door wall-mounted enclosure with lockable handles / latches
14-gauge steel construction with continuously welded seamsFinished in polyester powder coatLouvered side panelsBrackets for wall mountingLiterature pocket
Stainless steel plumbing * Not for use with fluids that have a flash point below 100F (e.g. Gasoline, Alcohol, …)
STS 6000-4GPM(-S) – Control / Alarm Features
• Pump Control Key Selector Switch: Manual – Off – Automatic
• Alarm Reset Push Button• Emergency Stop Push Button
(Turn to release)
Indicator Lights:• System Power• Pump Running• High Vacuum Alarm
(Change Primary Filter)• High Pressure Alarm
(Change Secondary Spin-On Filter)
• Leak Detection (Float Switch in Spill Tray)
• High Water Alarm (Drain bowl of primary filter)
STS 6000-4GPM(-S) – Components
1) Fuel Inlet (From Tank)2) Inlet Ball Valve3) Separ Primary Filter / Water Separator4) Vacuum Gauge5) Drain Valve (push and turn open)6) Man. Air Vent / Bleed Screw7) Vacuum Switch8) ALGAE-X® Smart Filtration Controller9) Pressure Relief Valve10) Gear Pump11) Motor12) ALGAE-X® Magnetic Fuel Conditioner13) Secondary Filter14) Pressure Switch15) Pressure Gauge16) Outlet Ball Valve17) Fuel Outlet (To Tank)18) Mechanical Flow Meter with Flow Switch19) Leak Detector (Float Switch) in Spill Tray
STS 6000-4GPM(-S) – Outline Drawing
STS 6000-4GPM(-S) – Wiring / Communication
Digital Input:•External pump shut-down contact
Digital Outputs:•NO Dry Contact – Summary Alarm•NO Dry Contact – Leak Detection•(Pump Running – Dry Contact)
STS 5000-10GPM – General Specs
Flow rate 10 GPM
Tank Size < 20,000 gal
Port Size 1” NPT
Power 110V / 60Hz or 230V / 50Hz
Weight ~450 lbs
Dim. (HxWxD) 42” x 68” x 14”
LG-X Model 3000
Primary Filter 10 or 30 micron (optional: 60 micron cleanable stainless steel)
Secondary Filter 3 or (10) micron (Water Block)
Motor 1 hp single phase, continuous duty, thermally protected
Weatherproof double door wall-mounted enclosure with lockable handles / latches
16-gauge steel construction with continuously welded seamsFinished in polyester powder coatLouvered side panelsFlanges for wall / pedestal mountingLiterature pocket
* Not for use with fluids that have a flash point below 100F (e.g. Gasoline, Alcohol, …)
STS 5000-10GPM – Components
1) Fuel Inlet2) Inlet Ball Valve3) Primary Filter / Water Separator4) Vacuum Gauge5) Drain Valve (push and turn to
open)6) Lid for Primary Filter
Replacement7) Vacuum Switch8) Water Sensor9) Priming Tee10) Gear Pump11) Motor12) ALGAE-X® Magnetic Fuel
Conditioner13) Secondary Filter14) Pressure Gauge and Pressure
Switch15) Check Valve 16) Outlet Ball Valve17) Fuel Outlet18) Pressure Relief Valve19) Leak Detector in Catch Basin
STS 5000-10GPM – Outline Drawing
STS 5000-10GPM – Wiring / Communication
Digital Input (for Auto Mode only):•External pump shut-down dry contact
Digital Outputs:•4 x Alarm Dry Contacts (NO/NC)
Flow rate 25 GPM
Tank Size < 50,000 gal
Port Size 2” NPT
Power 460V / 3 / 60Hz
Weight ~600 lbs
Dim. (HxWxD) 42” x 79” x 14”
LG-X Model 3000
Primary Filter 40 Mesh SS strainer
Water Separator / Coalescer
Secondary Filter 3 or (10) micron (Water Block) – 2 pcs. required
Motor 2 hp three phase, continuous duty, thermally protected
Weatherproof double door wall-mounted enclosure with lockable handles / latches
16-gauge steel construction, continuously welded seamsFinished in polyester powder coatLouvered side panelsFlanges for wall / pedestal mountingLiterature pocket
* Not for use with fluids that have a flash point below 100F (e.g. Gasoline, Alcohol, …)
STS 5000-25GPM – General Specs
STS 5000-25GPM – Components1) Fuel Inlet2) Inlet Ball Valve3) Strainer4) Vacuum Gauge5) Priming Tee6) Vacuum Switch7) Pressure Gauge (Pump
Discharge)8) Pressure Relief Valve9) Pressure Switch (Pump
Discharge)10) Drain Valve of Water Separator
/ Fuel Purifier11) Motor with coupled Gear Pump12) ALGAE-X® Magnetic Fuel
Conditioner13) Secondary Filter14) Pressure Switch15) Pressure Gauge16) Check Valve17) Fuel Outlet18) Water Sensor (Water
Separator / Fuel Purifier)19) Leak Detector in Catch Basin20) Outlet Ball Valve
STS Installation• Located as close as possible to the tank to
minimize plumbing run
• Dedicated pickup and return lines, separated from the fuel lines of the genset and / or other pumps
• Pickup tube at one end of the tank and a suction pipe as close as possible to the bottom of the tank at the deepest spot. An oversized, low restriction foot valve is recommended to keep the line primed.
• The return line should be placed at the farthest most point from the pick-up tube
• A priming-tee should be installed on the highest point of the suction line
• A backing wrench is required to connect to the provided pipe nipples – do not put and stress on plumbing
• Always comply with all applicable standards, safety guidelines as well as local, state and federal regulations.
STS Installation
Redundant, Primary In-line Fuel Filtration• Redundant, Switchable, High Capacity
Primary Filter/Water Separator
• Full Flow Rated up to 2000 GPH (single filter)
• 1”HG or less restriction at full flow
• Single lever to switch between filters under full load for simple, fail-safe and intuitive operation
• Five separation/filtration stages ensure 99.9% water separation at max flow rate
• Compact Design
• No Mess Filter Change with Top Access with very little clearance required
• Stainless steel, liquid filled vacuum gauges with “tell tale” finger
• Push and turn safety drain valve
Filter Monitoring System
• Filter Monitoring System with local alarm display and dry contacts for BAS/BMS
• “Plug & Play” connection to Redundant, Duplex Filter System
• High Water Alarm for Left and Right Filters
• High Vacuum Alarm (Service Filter)
• All alarms are locally displayed, as well as provided as N.O./N.C. dry contacts on a terminal block for customer wiring
• Alarms are latching and need to be reset on local alarm panel with provided reset push button
• Filter Monitoring System is equipped with power status indicator light
• Power: 24V DC
• Delivered complete and “ready to go”
• Portable, compact system on handcart
• Simple operation• Restore your fuel instead
of disposing it• Low operating cost due to
low use of consumables• Flow rates 3, 8, 15 & 25
GPM
Mobile Tank Cleaning Systems
MTC 500/1000/3000
TK-180XT
ALGAE-X International5400-1 Division Drive
Fort Myers, FL 33905
Tel: 239 690 9589
Toll Free: 877 425 4239
Fax: 239 690 1195
Email: [email protected]
Web: www.algae-x.net
CONTACT US