76
ALEXANDER H. FARLEY Massachusetts Institute of Technology 2014 Master of Architecture

Alexander Farley MIT Architecture Portfolio

Embed Size (px)

DESCRIPTION

Architectural design completed for 2014 M. Arch degree at MIT School of Architecture and Planning

Citation preview

  • ALEXANDER H. FARLEY

    Massachusetts Institute of Technology2014 Master of Architecture

  • // Studio WorkM.Arch Thesis: Laborlandschaft, 2013

    Shoaling Pier: High Density Housing, 2013

    Ca Sublimata: Venetian Museum, 2012

    ++Cloud Garden++ Data Center, 2012

    Plein Aire Laboratory: Lincoln Laboratory Addition, 2011

    Boston Architectural College Annex, 2011

    Forest For The Trees: Kenmore Station, 2011

    // Professional WorkRenderings, 2012 - 2013

    Purple Residence Pavilion, 2011

    Purple Residence Addition, 2012

    // Scripting + FabricationUnflat Pavilion, 2011

    Forces Frozen, 2014

    Bubble Wall, 2012

    Recursions, 2012

    Objectifications, 2012

    Enneper Vase, 2013

    Costa Vase, 2013

    Radiolarian Bowl, 2013

    Press-Fit Tray, 2011

    04

    16

    22

    30

    36

    44

    48

    68

    70

    72

    52

    54

    56

    58

    59

    60

    61

    62

    63

    ALEXANDER FARLEY 1

  • ALEXANDER FARLEY2

  • // Professional Work

    // Scripting + Fabrication

    // Studio WorkM.Arch Thesis: Laborlandschaft, 2013

    Shoaling Pier: High Density Housing, 2013

    Ca Sublimata: Venetian Museum, 2012

    ++Cloud Garden++ Data Center, 2012

    Plein Aire Laboratory: Lincoln Laboratory Addition, 2011

    Boston Architectural College Annex, 2011

    Forest For The Trees: Kenmore Station, 2011

    04

    16

    22

    30

    36

    44

    48

    ALEXANDER FARLEY 3

  • RHINOCEROS, GRASSHOPPER, 3DS MAX, MAXWELL, V-RAY, THE ADOBE SUITE, AND PHYSICAL MODELLING WERE UTILIZED THROUGHOUT THE SEMESTER

    // LABORLANDSCHAFTSTUDIO: MIT THESIS - ANDREW SCOTTSITE: SEAPORT DISTRICT, BOSTONFALL, 2013

    ALEXANDER FARLEY4

  • This thesis proposes to redesign the industrial pharmaceuti-cal laboratory typology by rethinking the composition of the labora-tory module; the smallest functional sub-unit of the laboratory type. The design for this thesis applies contemporary corporate counter-culture spatial organizational ideas onto the laboratory module. Central to these concepts is an architecture that is user-oriented and environmentally sensitive rather than managerially-oriented. The spatial organization seeks to flatten the managerial hierarchy by eliminating explicit office spaces. The laboratory is instead spa-tially divided according to affinity for behaviors and activities rather than strict programmatic designations.

    The laboratory module was initially conceived during World War II as a spatial system to accommodate inter-disciplinary re-search and development teams in an industrial laboratory setting. However, the spatial design of the module has become determin-istically dictated by managerial control systems and calibrated by infrastructural service, rather than serving the environmental and social needs of the researchers. Contemporary laboratory architec-ture requires the same shift away from spaces organized for clerical work to fluid and open fields that have occurred in corporate archi-tecture. However, architectural design cannot control occupants behaviors, but it can endorse a specific networked culture through the con-figuration of spaces. The use of common flexible spaces endorses and encourages social interaction. Likewise the form and figure of the laboratory establishes an environmental tone by allowing the research spaces to sit within an open field. This open field aspect allows for maximum daylighting and greater levels of visual and social interaction. Through a plug and play service infrastruc-ture, the lab benches and fume hoods can behave more as setting and furniture rather than rigid spatial datums. Additionally, these spaces also provide for reconfigurability and easy upgradeability. By seeking to move away from standard laboratory spatial solutions and conventions the design takes the position that a laboratory field condition encourages new modes of scientific interaction and pro-duction. This laboratory functions as much as an intellectual play ground as it does a functional research laboratory.

    ALEXANDER FARLEY 5

  • PUBLIC PATH

    PUBLIC PIERS

    PUBLIC PHYSIC GARDEN

    SERVICE CORE

    LAB MODULE - HEAVY HVAC

    LAB MODULE - MEDIUM HVAC

    LAB MODULE - LIGHT HVAC

    CAFETERIA

    ROOF TERRACE

    ATRIUM

    SCIENCE MUSEUM (1st FLOOR)

    AUDITORIUM

    ENTRANCE PROMENADE

    MEDICINAL ARBORETUM

    PARKING LOT

    MAIN ENTRANCE

    PUBLIC TRANSPORTATION

    PUMP STATION (UNDERGROUND)

    GYM (2nd FLOOR)

    SERVICE ENTRANCE

    B B

    A

    A

    FEMA Flood Zones= 100 yr flood - no base elevation

    = 100 yr flood - with base elevation

    = 500 yr flood

    Landmass Change

    Waterfront Access + CirculationBoston BioPharmaceutical + Academia Clustering

    ALEXANDER FARLEY6

  • PUBLIC PATH

    PUBLIC PIERS

    PUBLIC PHYSIC GARDEN

    SERVICE CORE

    LAB MODULE - HEAVY HVAC

    LAB MODULE - MEDIUM HVAC

    LAB MODULE - LIGHT HVAC

    CAFETERIA

    ROOF TERRACE

    ATRIUM

    SCIENCE MUSEUM (1st FLOOR)

    AUDITORIUM

    ENTRANCE PROMENADE

    MEDICINAL ARBORETUM

    PARKING LOT

    MAIN ENTRANCE

    PUBLIC TRANSPORTATION

    PUMP STATION (UNDERGROUND)

    GYM (2nd FLOOR)

    SERVICE ENTRANCE

    B B

    A

    A

    ALEXANDER FARLEY 7

  • Lab bench plugs into sub-floor service manifold

    Lab bench can rotate about the service port

    Conditioned air

    Bench services manifold [gas, vacuum, electrical, data]

    Bench services tap [gas, vacuum, electrical, data]

    Configuration 1

    Transformation

    Configuration 2

    Social Mixing

    First Floor - Lab Benches

    Mezzanine - Desks

    Second Floor - Lab Benches

    First Floor - Lab Benches

    No Social or VisualInteraction

    Second Floor - Lab Benches

    Visual Interaction

    Visual Interaction

    Standard Laboratory Section

    Social Laboratory Section

    Short Section

    Social Mixing

    First Floor - Lab Benches

    Mezzanine - Desks

    Second Floor - Lab Benches

    First Floor - Lab Benches

    No Social or VisualInteraction

    Second Floor - Lab Benches

    Visual Interaction

    Visual Interaction

    Standard Laboratory Section

    Social Laboratory Section

    Short Section

    PLUG + PLAY LAB BENCH SERVICING RECONFIGURABLE LAB SPACE

    BUILDING SYSTEMS SECTIONAL PARTI

    ROOF

    GLAZING

    CLADDING

    HVAC

    STRUCTURE

    SERVICE CORES

    3rd FLOOR

    2nd FLOOR

    1st FLOOR

    ALEXANDER FARLEY8

  • SECOND FLOOR [+10m]

    FIRST FLOOR [+5m]

    ALEXANDER FARLEY 9

  • 1:50 STRUCTURE + SERVICE MODELALEXANDER FARLEY10

  • 1:200 SITE MODEL ALEXANDER FARLEY 11

  • 32.00
  • UDI = 4.07 %

    UDI = 62.82 %

    UDI = 38.75 %

    UDI = 57.11 %

    UDI = 46.47 %

    UDI = 45.46 %

    Third Floor

    Second Floor

    First Floor

    0

    17

    33

    50

    67

    83

    100

    % Occupied Hours

    USEFUL DAYLIGHT FROM ILLUMINATION SIMULATIONMeasurement from 0% to 100%, with the building occupied from 8am to 6pm annually. 4 ambient bounces. 2m grid.Useful Daylight Illuminance (UDI) divides the working hours into three groups: 2000 lux (too much daylight with potential heat gain issues)

    UDI = 4.07 %

    UDI = 62.82 %

    UDI = 38.75 %

    UDI = 57.11 %

    UDI = 46.47 %

    UDI = 45.46 %

    Third Floor

    Second Floor

    First Floor

    0

    17

    33

    50

    67

    83

    100

    % Occupied Hours

    USEFUL DAYLIGHT FROM ILLUMINATION SIMULATIONMeasurement from 0% to 100%, with the building occupied from 8am to 6pm annually. 4 ambient bounces. 2m grid.Useful Daylight Illuminance (UDI) divides the working hours into three groups: 2000 lux (too much daylight with potential heat gain issues)

    ALEXANDER FARLEY 13

  • 3rd FLOOR CAFETERIA + VIEW OF ORGANIC SYNTHESIS LAB

    1st FLOOR SLIDING OFFICE PODS

    3rd FLOOR PATIO + VIEW OF BOSTON HARBOR

    1st FLOOR LABORATORY + VIEW OF OCEAN

    ALEXANDER FARLEY14

  • CENTRAL ATRIUM + CONFERENCE ROOM ALEXANDER FARLEY 15

  • RHINOCEROS, PYTHON, GRASSHOPPER, 3DS MAX, MAXWELL, V-RAY, THE ADOBE SUITE, AND PHYSICAL MODELLING WERE UTILIZED THROUGHOUT THE SEMESTER

    // SHOALING PIERSTUDIO: MIT - ANDREW SCOTTSITE: RINCON PARK, SAN FRANCISCOSPRING, 2013

    ALEXANDER FARLEY16

  • Public Spaces= Park

    = Open spaces

    = Pedestrian

    = Public transportationPublic Access

    = Office space

    = Community business

    = Light Industrial

    = ResidentialZoning

    ALEXANDER FARLEY 17

  • UNIT 1 - 3rd FLOOR DOUBLE BEDROOM UNIT 4 - 3rd FLOOR SINGLE BEDROOM UNIT 7 - 4th FLOOR CONFERENCE ROOM

    SITE PLAN

    ALEXANDER FARLEY18

  • UNIT 3rd FLOOR PLANS SHORT SECTION

    ALEXANDER FARLEY 19

  • 1:50 UNIT MODEL + 1:200 SITE MODEL ALEXANDER FARLEY20

  • ALEXANDER FARLEY 21

  • RHINOCEROS, PYTHON, GRASSHOPPER, 3DS MAX, MAXWELL, V-RAY, THE ADOBE SUITE, AND PHYSICAL MODELLING WERE UTILIZED THROUGHOUT THE SEMESTER

    // CA SUBLIMATASTUDIO: MIT - MARIA SEGANTINI (C + S)SITE: PARCO SAN GIULIANO, VENICE, ITALYSPRING, 2012

    ALEXANDER FARLEY22

  • I N T E R A C T I V E / S E R V E D P R O G R A M

    N O N - I N T E R A C T I V E / S E R V I C E P R O G R A M

    W E B M U S E U M

    M A S K S

    B O A T B U I L D I N G

    P O T T E R Y

    B O A T R E N T A L

    G L A S S M A K I N G

    A U D I T O R I U M

    C A F E

    G A L L E R Y

    F O O DP R E P A R A T I O N

    A D M I N I S T R A T I O N

    P U B L I C S Q U A R E

    GA

    LLE

    RY

    GA

    LLE

    RYSALON

    GA

    LL

    ER

    Y

    GA

    LL

    ER

    Y

    GA

    LL

    ER

    Y

    GA

    LL

    ER

    Y

    GA

    LL

    ER

    Y

    THEATER

    CA

    FE

    BOAT RENTALBOAT STORAGE

    PUBLIC

    STUDIO

    STUDIO STUDIO STUDIO

    P A R T I

    L E V E L - 2 E N T R A N C E L E V E LL E V E L - 1

    L E V E L 2L E V E L 1

    GA

    LL

    ER

    Y

    GA

    LL

    ER

    Y

    GLASS

    POTTERY

    PO

    RTE

    GO

    PO

    RTE

    GO PIANO

    NOBILE

    P R O G R A M M I N G

    THEATER

    THEATER

    SQUARE

    The rising tides and eroding ground of the Veneto lagoon demands a strategy to connect with the mainland. A failure of many contemporary archi-tectural designs in Venice is the paradoxical embrace of Venetian history and culture with contemporary design. In essence it must exist and not-exist at the same time, a kind of sublimation between solid and void. This cultural center propses an adaptation of the Venetian palace typology with its long piano nobile and portego spaces pivoting around a piaza space that visually connects the center with the island of Venice to the West. The center is skinned with a louver system that offers environmental control as well allowing the building to simultaneously exist as a solid and void.

    ALEXANDER FARLEY 23

  • R-1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    SECTION C

    SECTION A

    SECTION B

    ALEXANDER FARLEY24

  • R-1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    R

    -1

    E

    1

    2

    -2

    SECTION D

    SECTION E

    ALEXANDER FARLEY 25

  • LEVEL -1 LEVEL 1 LEVEL 2

    LEVEL 3

    ALEXANDER FARLEY26

  • 1:200 MODEL AND CONNECTION TO SITE ALEXANDER FARLEY 27

  • DOCK + BOAT RENTAL

    ARTIST LABS + ROOF COURTYARD

    MAIN ENTRANCE + CENTRAL ATRIUM

    VIEW OF VENICE FROM OUTDOOR SQUARE + CAFE

    ALEXANDER FARLEY28

  • ENTRANCE + OUTDOOR THEATER ALEXANDER FARLEY 29

  • Michael Maltzan Architecture, Inc.

    RHINOCEROS, PYTHON, GRASSHOPPER, 3DS MAX, MAXWELL, V-RAY, THE ADOBE SUITE, AND PHYSICAL MODELLING WERE UTILIZED THROUGHOUT THE SEMESTER

    // ++ CLOUD GARDEN ++STUDIO: MIT - SHEILA KENNEDY (KVA)SITE: MINNEAPOLIS, MINNESOTAFALL, 2012

    ALEXANDER FARLEY30

  • Michael Maltzan Architecture, Inc.

    The neighborhoods of northwest Minneapolis have

    become separated from the natural amenities of the Mississippi

    River and the cultural programs available to the rest of the city. At

    the same time Minneapolis seeks both future-looking commercial

    opportunities and a brand identity that allows it to remain

    relevant as a city. The siting of an architectural intervention that

    systemically integrates a data center with a botanical garden on the

    northwest bank of the Mississippi River and expands pedestrian

    infrastructure provides a means for the city to reconnect the

    northwestern neighborhoods with the river park system, create a

    cultural destination, and spur economic growth. Minneapolis is a

    city that has long used the river as an economic engine. However,

    this has resulted in a tension between the unavoidable impact of

    industry on the land and the sacred relationship that Minnesotans

    have with nature. This design seeks to relieve the historic tension

    between industry and nature through the integration of the botanical

    gardens climatic systems with the data centers infrastructural

    systems out of which a larger ecology can emerge. The garden

    can become a media-rich environment warmed and enveloped

    in an inflatable system generated by the data center waste heat

    and the data center more efficiently regulate its environmental

    systems through the mass and biological features of the plants.

    RDF

    RDF

    Fuel type:

    = Hydro

    = Coal

    = Natural Gas

    = Nuclear

    = Refuse-derived

    High Bridge St. Paul, MN

    570 MW

    Inver Hills Inver Grove, MN

    3.6 MW Prairie Island

    Welsh, MN

    1,100 MW

    Red Wing Red Wing, MN

    200 MW

    South EastU. Minnesota

    ? MW

    Hennepin IslandMinneapolis, MN

    12 MW

    Riverside Minneapolis, MN

    511 MW

    Black Dog Burnsville, MN

    538 MW

    Blue Lake Shakopee, MN

    612 MW

    Alan S. King Bayport, MN

    588 MW

    Riverdale Somerset, WI

    0.6 MW

    Apple River Somerset, WI

    2.9 MW

    St. Croix Falls St. Croix Falls, WI

    570 MW

    Monticello Nuclear Monticello, MN

    600 MW

    Sharco Becker, MN

    2,400 MW

    Granite City St. Cloud, MN

    64 MW

    = Deposition of silt on riverbank

    = Scouring of earth from riverbank

    Dam +Lock - 1967

    Site

    Northstar Commuter Rail

    Hennepin Ave

    3rd Ave

    Stone Arch Bridge

    HW 18

    Plymouth Ave

    Broadway Ave

    Burlington Northern Sante Fe RR

    Lowry Ave

    42nd Ave

    Canadian Pacific RR

    ENERGY GENERATION

    MISSISSIPPI RIVER - RIVERBANK CHANGE

    ALEXANDER FARLEY 31

  • Inflatable manifold skin

    Botanical garden

    Inflatable manifold skin

    Rigid structure + Service chases

    Community gardens

    Server racks

    Cold water inlet

    Server racks

    Service / Cooling level

    Botanical gardens

    Community gardensHeat rises off of serversto warms gardens + warmedwater waters plants

    Cold air and added humidityresult in precipitation

    Cold air from MississippiRiver cools server racks

    PROGRAMMATIC + STRUCTURAL ORGANIZATION

    INFRASTRUCTURAL STRATEGY

    ENTRANCE LEVEL

    ALEXANDER FARLEY32

  • ALEXANDER FARLEY 33

  • Inflatable - Top Surface

    Service Level

    Botanical Garden

    Inflatable - Bottom Surface

    Entrance Level + Community Gardens

    Park Walkway

    Cold Water Inlet

    Inflatable - Top Surface

    Service Level

    Botanical Garden

    Inflatable - Bottom Surface

    Entrance Level + Community Gardens

    Park Walkway

    Cold Water Inlet

    Inflatable - Top Surface

    Service Level

    Botanical Garden

    Inflatable - Bottom Surface

    Entrance Level + Community Gardens

    Park Walkway

    Cold Water Inlet

    SECTION C

    SECTION A

    SECTION B

    ALEXANDER FARLEY34

  • INFLATABLE BOTANICAL GARDEN ALEXANDER FARLEY 35

  • RHINOCEROS, GRASSHOPPER, 3DS MAX, MAXWELL, V-RAY, THE ADOBE SUITE, AND PHYSICAL MODELLING WERE UTILIZED THROUGHOUT THE SEMESTER

    // PLEIN AIRE LABORATORYSTUDIO: MIT - ANDREW SCOTTSITE: MIT LINCOLN LABORATORY, LEXINGTON, MASSACHUSETTSFALL, 2011

    ALEXANDER FARLEY36

  • This project offers a major expansion to Lincoln Laboratory campus. The current campus is overcrowded and decentralized. This design seeks open the laboratory space and offer new spaces for cross-disciplinary collaboration within an environment maximized for human comfort. The laboratory is an environment that has traditionally acquiesced to the technical and infrastructural needs of the program. This ignores the importance of the human capital that the laboratory serves. It is the com-fort of the scientists that leads to innovation. This laboratory proposes a return to the envelope as the source of light and air in order to best serve the researchers. The envelope provides a microclimate that elevates the comfort of the occupants while providing for efficient thermal control of clean room, pro-duction and assembly spaces. As an extension of this, the tectonic elements of the laboratory dissipate with each floor; all beneath a roof comprised of nimbular aerogel-insulated ETFE pillows. The result is that through a search for environmental comfort an inversion of indoor and outdoor space can occur.

    ALEXANDER FARLEY 37

  • ENTRANCE LEVEL SECOND LEVEL

    THIRD LEVEL

    FOURTH LEVEL

    FIFTH LEVEL

    ALEXANDER FARLEY38

  • GEOTHERMAL HEAT PUMP

    VERTICALLY-MOUNTED AHUs

    ENTHALPY WHEEL

    HEAT EXCHANGERS

    PREVAILING WIND

    FRESH AIR INTAKE

    CHIMNEY EFFECTNAT. VENTILATION CHIMNEY EFFECT

    NAT. VENTILATION

    CHIMNEY EFFECTNAT. VENTILATION

    GROUP PROJECT OFFICES

    MACHINE SHOP

    SERVICE CHASE

    I & T

    MICROSYSTEMS INTEGRATION CLASS 1000

    VERTICAL CHASE

    MICROSYSTEMS INTEGRATION CLASS 100

    GROUP PROJECT OFFICES

    GROUP PROJECT OFFICES

    GROUP PROJECT OFFICES

    MICROFLUIDICS +BIOSENSORS LAB

    GEOTHERMAL HEAT PUMP

    VERTICALLY-MOUNTED AHUs

    ENTHALPY WHEEL

    HEAT EXCHANGERS

    PREVAILING WIND

    FRESH AIR INTAKE

    CHIMNEY EFFECTNAT. VENTILATION CHIMNEY EFFECT

    NAT. VENTILATION

    CHIMNEY EFFECTNAT. VENTILATION

    GROUP PROJECT OFFICES

    MACHINE SHOP

    SERVICE CHASE

    I & T

    MICROSYSTEMS INTEGRATION CLASS 1000

    VERTICAL CHASE

    MICROSYSTEMS INTEGRATION CLASS 100

    GROUP PROJECT OFFICES

    GROUP PROJECT OFFICES

    GROUP PROJECT OFFICES

    MICROFLUIDICS +BIOSENSORS LAB

    SECTION A

    SECTION B

    ALEXANDER FARLEY 39

  • B C

    DEF G H I

    J

    K

    LM

    N

    O

    P

    Q

    R

    ST

    U

    V

    WX

    Y Z

    B

    C

    D

    EF

    G

    H

    I

    P

    A

    A

    A. Aluminum claddingB. Steel curtain wall hangerC. Fiberglass insulationD. Tubular steel columnE. Steel mounting flangeF. Steel J-anchorG.Tensegrity roof tensioning cableH. ETFE foilI. Tubular steel columnJ. Tensegrity tubular steel tension rodK. ETFE pillow pressure-regulation hoseL. ETFE pressure-regulation valveM. Bird guardN. GrateO. Aluminum gutterP. Granular aerogel insulation

    A. Low-iron insulating glassB. Aluminum window sillC. Oak window sillD. Medium-density concreteE. Gypsum drywallF. Oak floor baordG. Moisture barrier membraneH. Aluminum floor riserI. Floor finishJ. Interior glazingK. Extruded aluminum framingL. Drop-ceiling hangersM. Drop ceilingO. Low-density conrete light shelfP. AwningQ. Spider-sytem tensioning cableR. Stainless steel aluminum cladding wall anchorS. Extruded polystyrene insulationT. Alucobond dry-seal aluminum cladding z-clip systemU. Spider clip rodV. Spider clip depth-adjustment elementW. Spider clipX. Silicone sealY. Laminated float glassZ. Vertical spider system tensioning cable

    1.5 = 1

    LINCOLN LABS - WEST LAB ADDITION - WALL DETAIL

    ENVELOPE STRUCTURAL SYSTEM DETAIL SECTION

    ALEXANDER FARLEY40

  • VIEW OF CLEAN ROOMS FROM COLLABORATION SPACE ALEXANDER FARLEY 41

  • 1/16 = 1 SITE MODELALEXANDER FARLEY42

  • LABORATORY CENTRAL GALLERY + COLLABORATION SPACE ALEXANDER FARLEY 43

  • RHINOCEROS, GRASSHOPPER, MAXWELL, THE ADOBE SUITE, AND PHYSICAL MODELLING WERE UTILIZED THROUGHOUT THE SEMESTER

    // FOREST FOR THE TREESSTUDIO: MIT - JOEL LAMERESITE: KENMORE SQUARE, BOSTONSPRING, 2011

    ALEXANDER FARLEY44

  • DENDRIFORM CANTILEVER MORPHOLOGIES

    15 10 7

    15 deg 30 deg

    EAST SECTION NORTH SECTION

    REFLECTED CEILING PLAN

    ROOF PLAN

    ALEXANDER FARLEY 45

  • RHINOCEROS, GRASSHOPPER, MAXWELL, V-RAY, THE ADOBE SUITE, AND PHYSICAL MODELLING WERE UTILIZED THROUGHOUT THE SEMESTER

    // TRANSPARENT SCHOOLSTUDIO: MIT - JOEL LAMERESITE: KENMORE SQUARE, BOSTONSPRING, 2011

    ALEXANDER FARLEY46

  • An extension to the Boston Architectural College loacted in Kenmore Square, Boston. This design seeks transparency in materiality and organization as a means to create a dialogue and discourse with a public unfamiliar with the discipline of architecture. A clear interface between the public and the architec-ture students is created through a series of inter-digitated gallery / review spaces and observation plat-forms. A necessary sepparation between the students and the public is achieved through distinct circu-lation routes. The structural system derives from the embodiment of the tree; offering both strength and shelter while simulataneously allowing the flexible creation of spaces calibrated to programmatic need.

    CA

    FE

    LO

    BB

    Y LIB

    RA

    RY

    FAB LABWOOD SHOP

    RE

    VIE

    W

    GA

    LL

    ER

    Y

    PRINT / PLOT

    AU

    DIT

    OR

    IUM

    COMPUTER LAB

    CL

    AS

    SR

    OO

    MS

    ADMINISTRATION

    THEORY DESIGN MATERIALS

    ORGANIZATION

    STUDIO

    GENERAL CIRCULATION

    PRIVATE CIRCULATION

    PUBLIC CIRCULATION

    RE

    VIE

    W

    RE

    VIE

    W

    GA

    LL

    ER

    Y

    GA

    LL

    ER

    Y

    ORIGINAL SITE PLAN WITH SUBTERRANEAN STRUCTURE

    MODIFIED SITE PLAN WITH SUBTERRANEAN STRUCTURE

    = SITE EXPANSION

    ALEXANDER FARLEY 47

  • THIRD LEVEL

    SECTION A

    ALEXANDER FARLEY48

  • CENTRAL GALLERY SPACE ALEXANDER FARLEY 49

  • ALEXANDER FARLEY50

  • // Studio Work

    // Professional Work

    // Scripting + FabricationUnflat Pavilion, 2011

    Forces Frozen, 2014

    Bubble Wall, 2012

    Recursions, 2012

    Objectifications, 2012

    Enneper Vase, 2013

    Costa Vase, 2013

    Radiolarian Bowl, 2013

    Press-Fit Tray, 2011

    52

    54

    56

    58

    59

    60

    61

    62

    63

    ALEXANDER FARLEY 51

  • // UNFLAT PAVILIONDESIGNED BY PROF. NICK GELPI FOR MIT 150SITE: MIT, CAMBRIDGE, MASPRING, 2011

    SPRING LOADED RIGID SLOT RIGID SILL PLATE SOLID PLATE

    RHINOCEROS, MASTERCAM, + 3-AXIS CNC MILLING WERE USED THROUGHOUT THE COURSE OF THE PROJECT.

    ALEXANDER FARLEY52

  • Exterior Panel Interior Panel

    48 in

    96 in

    0.5

    in1.

    6 in

    48 in

    96 in

    0.5

    in1.

    6 in

    ALEXANDER FARLEY 53

  • // FORCES FROZENDESIGNED WITH JAMES COLEMAN + TYLER CRAINSITE: KRESGE CHAPEL, MIT, CAMBRIDGE, MAWINTER, 2014

    RHINOCEROS, MASTERCAM, + 3-AXIS CNC MILLING WERE USED THROUGHOUT THE COURSE OF THE PROJECT.

    ALEXANDER FARLEY54

  • ALEXANDER FARLEY 55

  • // BUBBLE WALLDESIGNED WITH YANG-PING WANG + CHRIST MILLERSTUDIO: MIT - EMERGENT MATERIALS WORKSHOPSPRING, 2012

    SOLUTION COMPOSITION TESTING FULL SCALE PROTOTYPE DESIGN FULL SCALE PROTOTYPE DOCUMENTATION

    0 HR

    S1 H

    RS

    3 HR

    S6 H

    RS

    12 HR

    S

    FILTER MEIDA TRAY

    SPONGE

    RESEVOIR

    AIR COMPRESSOR

    IRRIGATION SYSTEM

    GLAZING

    Adaptation of the Cambridge Public Library double-skinned facade to use a soap-foam insulation system.

    ALEXANDER FARLEY56

  • SOLUTION COMPOSITION TESTING FULL SCALE PROTOTYPE DESIGN FULL SCALE PROTOTYPE DOCUMENTATION

    0 HR

    S1 H

    RS

    3 HR

    S6 H

    RS

    12 HR

    S

    FILTER MEIDA TRAY

    SPONGE

    RESEVOIR

    AIR COMPRESSOR

    IRRIGATION SYSTEM

    GLAZING

    ALEXANDER FARLEY 57

  • PYTHON, RHINOCEROS,AND DIGITAL FABRICATION

    import rhinoscriptsyntax as rsimport math

    ### Controller classclass GoldenSpiral(): def __init__(self): self.NS = None self.phi = (math.sqrt(5)+1)/2 self.plane = rs.WorldXYPlane() # Negative angle for clockwise spiral self.angle = -90 origin = [0,0,0] self.origin = rs.AddPoint(origin) self.spiral_points = [] endPt = [1,0,0] self.endPt = rs.AddPoint(endPt) self.endPts = [] self.endPts.append(endPt) self.spiralArcList = [] def makeSpiralPoints(self): endPt = self.endPt origin = self.origin for i in range(12): trans = rs.VectorSubtract(origin, endPt) scaled_trans = rs.VectorScale(trans, self.phi) origin = rs.CopyObject(endPt, scaled_trans) originCoord = rs.PointCoordinates(origin) points = [origin, endPt] tempID = rs.AddCurve(points) lineID = rs.RotateObject(tempID, origin, self.angle) temp_endPt = rs.CurveEndPoint(lineID) endPt = rs.AddPoint(temp_endPt) endPtCoord = rs.PointCoordinates(endPt) self.endPts.append(endPtCoord) rs.DeleteObject(tempID) params = [scaled_trans, originCoord] self.spiral_points.append(params) def makeSpiralArc(self):

    length = len(self.spiral_points) index = range(length)

    angle = 90 for i in index: plane = rs.MovePlane(self.plane, self.spiral_points[i][1]) rotated = rs.RotatePlane(plane, angle, plane.ZAxis) radius = math.fabs(self.spiral_points[i][0][0]) if (radius != 0): arc = rs.AddArc(rotated, radius, self.angle) rs.RotateObject(arc, self.spiral_points[i][1], self.angle) else: radius = math.fabs(self.spiral_points[i][0][1]) arc = rs.AddArc(rotated, radius, self.angle) rs.RotateObject(arc, self.spiral_points[i][1], self.angle)

    self.spiralArcList.append(arc) angle -= 90 def main(self): self.makeSpiralPoints() self.makeSpiralArc() self.NS = NautilusShell(self) self.NS.main()

    ### Model classclass NautilusShell(): def __init__(self, NS): self.endPts = NS.endPts self.spiralArcList = NS.spiralArcList self.midpointsList = [] self.quarterpointsList = [] self.crossSectionList = [] self.surfaceList = [] self.SP = None def makeControlPoints(self): length = len(self.endPts) index = range(length) for i in index: if (i 0 and i

  • import rhinoscriptsyntax as rsimport math

    ### Controller classclass GoldenSpiral(): def __init__(self): self.NS = None self.phi = (math.sqrt(5)+1)/2 self.plane = rs.WorldXYPlane() # Negative angle for clockwise spiral self.angle = -90 origin = [0,0,0] self.origin = rs.AddPoint(origin) self.spiral_points = [] endPt = [1,0,0] self.endPt = rs.AddPoint(endPt) self.endPts = [] self.endPts.append(endPt) self.spiralArcList = [] def makeSpiralPoints(self): endPt = self.endPt origin = self.origin for i in range(12): trans = rs.VectorSubtract(origin, endPt) scaled_trans = rs.VectorScale(trans, self.phi) origin = rs.CopyObject(endPt, scaled_trans) originCoord = rs.PointCoordinates(origin) points = [origin, endPt] tempID = rs.AddCurve(points) lineID = rs.RotateObject(tempID, origin, self.angle) temp_endPt = rs.CurveEndPoint(lineID) endPt = rs.AddPoint(temp_endPt) endPtCoord = rs.PointCoordinates(endPt) self.endPts.append(endPtCoord) rs.DeleteObject(tempID) params = [scaled_trans, originCoord] self.spiral_points.append(params) def makeSpiralArc(self):

    length = len(self.spiral_points) index = range(length)

    angle = 90 for i in index: plane = rs.MovePlane(self.plane, self.spiral_points[i][1]) rotated = rs.RotatePlane(plane, angle, plane.ZAxis) radius = math.fabs(self.spiral_points[i][0][0]) if (radius != 0): arc = rs.AddArc(rotated, radius, self.angle) rs.RotateObject(arc, self.spiral_points[i][1], self.angle) else: radius = math.fabs(self.spiral_points[i][0][1]) arc = rs.AddArc(rotated, radius, self.angle) rs.RotateObject(arc, self.spiral_points[i][1], self.angle)

    self.spiralArcList.append(arc) angle -= 90 def main(self): self.makeSpiralPoints() self.makeSpiralArc() self.NS = NautilusShell(self) self.NS.main()

    ### Model classclass NautilusShell(): def __init__(self, NS): self.endPts = NS.endPts self.spiralArcList = NS.spiralArcList self.midpointsList = [] self.quarterpointsList = [] self.crossSectionList = [] self.surfaceList = [] self.SP = None def makeControlPoints(self): length = len(self.endPts) index = range(length) for i in index: if (i 0 and i

  • GRASSHOPPER, RHINOCEROS, DIGITAL FABRICATION, AND HAND FINISHED

    // ENNEPER VASEFALL, 2013

    ALEXANDER FARLEY60

  • MATHEMATICA, PYTHON, RHINOCEROS, DIGITAL FABRICATION, AND HAND FINISHED

    Costa'a Minimal SurfaceMatthias WeberIndiana Universityhttp://www.indiana.edu/~minimal

  • GRASSHOPPER, RHINOCEROS, DIGITAL FABRICATION, AND HAND FINISHED

    GRASSHOPPER, RHINOCEROS, DIGITAL FABRICATION, AND HAND FINISHED

    // RADIOLARIAN BOWLFALL, 2013

    ALEXANDER FARLEY62

  • 12

    3

    4

    // ENNEPER VASESTUDIO: MIT - COMPLETE FABRICATIONWINTER, 2011

    RHINOCEROS, PARTWORKS, + 3-AXIS CNC MILLING WERE USED THROUGHOUT THE COURSE OF THE PROJECT.

    ALEXANDER FARLEY 63

  • Project to create a physical volumetric display system for the 3D modeling program Rhinoceros using Rhinoceros, Grasshopper/Firefly, Python, Arduino microcontroller, and 8x8x8 LED matrix.

    // FLOCK OF FIREFLIESSTUDIO: MIT - INDEPENDENT STUDYSPRING, 2013

    ALEXANDER FARLEY64

  • import rhinoscriptsyntax as rsimport math

    ### Controller classclass GoldenSpiral(): def __init__(self): self.NS = None self.phi = (math.sqrt(5)+1)/2 self.plane = rs.WorldXYPlane() # Negative angle for clockwise spiral self.angle = -90 origin = [0,0,0] self.origin = rs.AddPoint(origin) self.spiral_points = [] endPt = [1,0,0] self.endPt = rs.AddPoint(endPt) self.endPts = [] self.endPts.append(endPt) self.spiralArcList = [] def makeSpiralPoints(self): endPt = self.endPt origin = self.origin for i in range(12): trans = rs.VectorSubtract(origin, endPt) scaled_trans = rs.VectorScale(trans, self.phi) origin = rs.CopyObject(endPt, scaled_trans) originCoord = rs.PointCoordinates(origin) points = [origin, endPt] tempID = rs.AddCurve(points) lineID = rs.RotateObject(tempID, origin, self.angle) temp_endPt = rs.CurveEndPoint(lineID) endPt = rs.AddPoint(temp_endPt) endPtCoord = rs.PointCoordinates(endPt) self.endPts.append(endPtCoord) rs.DeleteObject(tempID) params = [scaled_trans, originCoord] self.spiral_points.append(params) def makeSpiralArc(self):

    length = len(self.spiral_points) index = range(length)

    angle = 90 for i in index: plane = rs.MovePlane(self.plane, self.spiral_points[i][1]) rotated = rs.RotatePlane(plane, angle, plane.ZAxis) radius = math.fabs(self.spiral_points[i][0][0]) if (radius != 0): arc = rs.AddArc(rotated, radius, self.angle) rs.RotateObject(arc, self.spiral_points[i][1], self.angle) else: radius = math.fabs(self.spiral_points[i][0][1]) arc = rs.AddArc(rotated, radius, self.angle) rs.RotateObject(arc, self.spiral_points[i][1], self.angle)

    self.spiralArcList.append(arc) angle -= 90 def main(self): self.makeSpiralPoints() self.makeSpiralArc() self.NS = NautilusShell(self) self.NS.main()

    ### Model classclass NautilusShell(): def __init__(self, NS): self.endPts = NS.endPts self.spiralArcList = NS.spiralArcList self.midpointsList = [] self.quarterpointsList = [] self.crossSectionList = [] self.surfaceList = [] self.SP = None def makeControlPoints(self): length = len(self.endPts) index = range(length) for i in index: if (i 0 and i

  • ALEXANDER FARLEY66

  • // Studio Work

    // Scripting + Fabrication

    // Professional WorkRenderings, 2012 - 2013

    Purple Residence Pavilion, 2011

    Purple Residence Addition, 2012

    68

    70

    72

    ALEXANDER FARLEY 67

  • FOR SASAKI ASSOCIATES - 2013 FOR SASAKI ASSOCIATES - 2013

    FOR ELIZABETH FARLEY - GSD M.ARCH THESIS - 2012 FOR ELIZABETH FARLEY - GSD M.ARCH THESIS - 2012

    ALEXANDER FARLEY68

  • FOR ELIZABETH FARLEY - GSD M.ARCH THESIS - 2012

    FOR THE PLANT CONNECTION - GREENHOUSE ADDITION - 2011FOR ELIZABETH FARLEY - GSD M.ARCH THESIS - 2012

    FOR ELIZABETH FARLEY - GSD M.ARCH THESIS - 2012

    ALEXANDER FARLEY 69

  • FENCING FENCINGSCREW

    SCREW SCREW SC

    RE

    W

    CORNER ASSEMBLYSTANDARD ASSEMBLY

    1 CEDAR FACING

    1 CEDAR FACING 1 CEDAR FACING

    1 x 1 CEDAR FACING

    4 x 4 PRESSURE-TREATED 4 x 4 PRESSURE-TREATED

    STANDARD POST-BEAM-RAFTER ASSEMBLY CORNER POST-BEAM-RAFTER ASSEMBLY

    This commission sought to create a vegetable gar-den enclosure that could protect the plants from backyard pests while maintaining the design language of the existing site. The pavilion employs traditional timber construction techniques and tectonic elements while remaining within a modest budget.

    // WYNDMOOR RESIDENCE GARDEN PAVILIONCLIENTS: LESLIE AND THOMAS PURPLESITE: WYNDMOOR, PASUMMER, 2011

    STANDARD POST-BEAM-RAFTER ASSEMBLY CORNER POST-BEAM-RAFTER ASSEMBLY

    STANDARD ASSEMBLY CORNER ASSEMBLY

    Rhinoceros and physical modeliing were used throughout the course of the project.

    ALEXANDER FARLEY70

  • 5

    45

    45

    15 1-1/4

    8

    16 3-1/4

    15 1-1/2

    5 9-7/8

    2 5-1/48 2-1/4

    45

    scarf or butt joint

    5 5 5

    15 6-1/2

    11 8-1/8

    4 10-1/2

    8

    16 3-1/4

    5 9-7/8

    2 5-1/445

    scarf or butt joint

    45

    8

    11 8-1/8

    The corner 2 x 10 sare 9 9-7/8 long

    2 x 10 x 10 2 x 10 x 102 x 10 x 5

    1 x 10 x 6

    2 x 10 x 5 2 x 10 x 5 2 x 10 x 5

    1 x 10 x 6

    GRADE

    CONCRETE FOOTER

    POST HOLDER

    4 x 4 PRESSURE-TREATED

    1 CEDAR FACING

    2 x 10 CEDAR

    2 x 10 CEDAR

    1 x 2 CEDAR

    2 x 10 CEDAR

    COUNTER-SUNK 0.5 CARRIAGE BOLT

    2 x 2 FENCING B/W FACING AND PT

    COUNTER-SUNK 0.5 CARRIAGE BOLT

    5 5 5 5 5

    25 6

    5

    5

    15 6

    25 6

    5 5 5 5 5

    7 2-3/4

    9-1/4

    7 2-3/4

    9-1/4

    7 2-3/4

    9-1/4

    2-3/8

    FRONT ELEVATION SIDE ELEVATION

    PLAN SECTION

    ALEXANDER FARLEY 71

  • // WYNDMOOR RESIDENCE ADDITIONCLIENTS: LESLIE AND THOMAS PURPLESITE: WYNDMOOR, PADESIGNED: WINTER, 2012CONSTRUCTION: SPRING. 2014

    AutoCAD, Revit, Rhinoceros, Max-well, and physical modelling were used throughout the course of the project.

    This project sought to reactivate an unused storage room as the main location for daily activity. The existing space allows for a kitchen and central hearth. The south fac-ing wall is pulled away from the house to al-low for greater day-lighting and create a space for casual dining and food and linen storage.

    ALEXANDER FARLEY72

  • 25 6

    3 9 4 8 4 4

    21 9

    21 8

    23 8

    4 4 4 8 3 9 4 6

    3 3 3 3 3 3 3

    2 4

    4 9

    14 9

    4 4

    12

    14 8 12 9

    4 9

    8 9

    8 9

    9

    18 9

    ALEXANDER FARLEY 73

  • PURPLE ADDITION - INTERIOR KITCHEN VIEWALEXANDER FARLEY74

    PortfolioIV - FrontAFarley - Final